Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket
version 2.017
Configuration classes used by Config::Model
generated from LCDd.conf
Select the LCD model Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'.
Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.
Set the initial contrast Optional. Type integer. upstream_default: '560'.
Set the initial brightness Optional. Type integer. upstream_default: '1000'.
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer. upstream_default: '0'.
Reinitialize the LCD's BIOS on driver start. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command (31). For those devices it may be necessary to enable this flag. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
Override the LCD size known for the selected model. Usually setting this value should not be necessary.Optional. Type uniline. default: '20x4'.
Override the default communication speed known for the selected model. Default value depends on model Optional. Type enum. choice: '19200', '115200'.
