Cosimo Streppone > Device-Modem > Device::Modem

Download:
Device-Modem-1.57.tar.gz

Dependencies

Annotate this POD

Related Modules

Win32::SerialPort
Net::SNPP
Modem::Vgetty
Term::ReadKey
Chart::Pie
DBD::CSV
IO::Handle
Getopt::Std
more...
By perlmonks.org
View/Report Bugs
Module Version: 1.57   Source  

NAME ^

Device::Modem - Perl extension to talk to modem devices connected via serial port

WARNING ^

This is BETA software, so use it at your own risk, and without ANY warranty! Have fun.

SYNOPSIS ^

  use Device::Modem;

  my $modem = new Device::Modem( port => '/dev/ttyS1' );

  if( $modem->connect( baudrate => 9600 ) ) {
      print "connected!\n";
  } else {
      print "sorry, no connection with serial port!\n";
  }

  $modem->attention();          # send `attention' sequence (+++)

  ($ok, $answer) = $modem->dial('02270469012');  # dial phone number
  $ok = $modem->dial(3);        # 1-digit parameter = dial number stored in memory 3

  $modem->echo(1);              # enable local echo (0 to disable)

  $modem->offhook();            # Take off hook (ready to dial)
  $modem->hangup();             # returns modem answer

  $modem->is_active();          # Tests whether modem device is active or not
                                # So far it works for modem OFF/ modem ON condition

  $modem->reset();              # hangup + attention + restore setting 0 (Z0)

  $modem->restore_factory_settings();  # Handle with care!
  $modem->restore_factory_settings(1); # Same with preset profile 1 (can be 0 or 1)

  $modem->send_init_string();   # Send initialization string
                                # Now this is fixed to 'AT H0 Z S7=45 S0=0 Q0 V1 E0 &C0 X4'

  # Get/Set value of S1 register
  my $S1 = $modem->S_register(1);
  my $S1 = $modem->S_register(1, 55); # Don't do that if you definitely don't know!

  # Get status of managed signals (CTS, DSR, RLSD, RING)
  my %signal = $modem->status();
  if( $signal{DSR} ) { print "Data Set Ready signal active!\n"; }

  # Stores this number in modem memory number 3
  $modem->store_number(3, '01005552817');

  $modem->repeat();             # Repeat last command

  $modem->verbose(1);           # Normal text responses (0=numeric codes)

  # Some raw AT commands
  $modem->atsend( 'ATH0' );
  print $modem->answer();

  $modem->atsend( 'ATDT01234567' . Device::Modem::CR );
  print $modem->answer();

DESCRIPTION ^

Device::Modem class implements basic AT (Hayes) compliant device abstraction. It can be inherited by sub classes (as Device::Gsm), which are based on serial connections.

Things Device::Modem can do

Things Device::Modem can't do yet

Things it will never be able to do

Examples

In the `examples' directory, there are some scripts that should work without big problems, that you can take as (yea) examples:

`examples/active.pl'

Tests if modem is alive

`examples/caller-id.pl'

Waits for an incoming call and displays date, time and phone number of the caller. Normally this is available everywhere, but you should check your local phone line and settings.

`examples/dial.pl'

Dials a phone number and display result of call

`examples/shell.pl'

(Very) poor man's minicom/hyperterminal utility

`examples/xmodem.pl'

First attempt at a test script to receive a file via xmodem protocol. Please be warned that this thing does not have a chance to work. It's only a (very low priority) work in progress...

If you want to help out, be welcome!

METHODS ^

answer()

One of the most used methods, waits for an answer from the device. It waits until $timeout (seconds) is reached (but don't rely on this time to be very correct) or until an expected string is encountered. Example:

        $answer = $modem->answer( [$expect [, $timeout]] )

Returns $answer that is the string received from modem stripped of all Carriage Return and Line Feed chars only at the beginning and at the end of the string. No in-between CR+LF are stripped.

Note that if you need the raw answer from the modem, you can use the _answer() (note that underscore char before answer) method, which does not strip anything from the response, so you get the real modem answer string.

Parameters:

atsend()

Sends a raw AT command to the device connected. Note that this method is most used internally, but can be also used to send your own custom commands. Example:

        $ok = $modem->atsend( $msg )

The only parameter is $msg, that is the raw AT command to be sent to modem expressed as string. You must include the AT prefix and final Carriage Return and/or Line Feed manually. There is the special constant CR that can be used to include such a char sequence into the at command.

Returns $ok flag that is true if all characters are sent successfully, false otherwise.

Example:

        # Enable verbose messages
        $modem->atsend( 'AT V1' . Device::Modem::CR );

        # The same as:
        $modem->verbose(1);

attention()

This command sends an attention sequence to modem. This allows modem to pass in command state and accept AT commands. Example:

        $ok = $modem->attention()

connect()

Connects Device::Modem object to the specified serial port. There are options (the same options that Device::SerialPort has) to control the parameters associated to serial link. Example:

        $ok = $modem->connect( [%options] )

List of allowed options follows:

baudrate

Controls the speed of serial communications. The default is 19200 baud, that should be supported by all modern modems. However, here you can supply a custom value. Common speed values: 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. This parameter is handled directly by Device::SerialPort object.

databits

This tells how many bits your data word is composed of. Default (and most common setting) is 8. This parameter is handled directly by Device::SerialPort object.

handshake

Sets the handshake (or flow control) method for the serial port. By default it is none, but can be either rts (hardware flow control) or xoff (software flow control). These flow control modes may or may not work depending on your modem device or software.

init_string

Custom initialization string can be supplied instead of the built-in one, that is the following: H0 Z S7=45 S0=0 Q0 V1 E0 &C0 X4, that is taken shamelessly from minicom utility, I think.

parity

Controls how parity bit is generated and checked. Can be even, odd or none. Default is none. This parameter is handled directly by Device::SerialPort object.

stopbits

Tells how many bits are used to identify the end of a data word. Default (and most common usage) is 1. This parameter is handled directly by Device::SerialPort object.

dial()

Dials a telephone number. Can perform both voice and data calls.

Usage:

        $ok = $modem->dial($number);
    $ok = $modem->dial($number, $timeout);
    $ok = $modem->dial($number, $timeout, $mode);

Takes the modem off hook, dials the specified number and returns modem answer.

Regarding voice calls, you will not be able to send your voice through. You probably have to connect an analog microphone, and just speak. Or use a GSM phone. For voice calls, a simple ; is appended to the number to be dialed.

If the number to dial is 1 digit only, extracts the number from the address book, provided your device has one. See store_number().

Examples:

        # Simple usage. Timeout and mode are optional.
    $ok = $mode->dial('123456789');

        # List context: allows to get at exact modem answer
        # like `CONNECT 19200/...', `BUSY', `NO CARRIER', ...
    # Also, 30 seconds timeout
        ($ok, $answer) = $modem->dial('123456789', 30);

If called in scalar context, returns only success of connection. If modem answer contains the CONNECT string, dial() returns successful state, otherwise a false value is returned.

If called in list context, returns the same $ok flag, but also the exact modem answer to the dial operation in the $answer scalar. $answer typically can contain strings like:

CONNECT 19200
NO CARRIER
BUSY

and so on ... all standard modem answers to a dial command.

Parameters are:

$number

mandatory, this is the phone number to dial. If $number is only 1 digit, it is interpreted as: dial number in my address book position $number.

So if your code is:

        $modem->dial( 2, 10 );

This means: dial number in the modem internal address book (see store_number for a way to read/write address book) in position number 2 and wait for a timeout of 10 seconds.

$timeout

optional, default is 30 seconds.

Timeout expressed in seconds to wait for the remote device to answer. Please do not expect an exact wait for the number of seconds you specified.

$mode

optional, default is DATA, as string. Allows to specify the type of call. Can be either:

DATA (default)

To perform a data call.

VOICE

To perform a voice call, if your device supports it. No attempt to verify whether your device can do that will be made.

disconnect()

Disconnects Device::Modem object from serial port. This method calls underlying disconnect() of Device::SerialPort object. Example:

        $modem->disconnect();

echo()

Enables or disables local echo of commands. This is managed automatically by Device::Modem object. Normally you should not need to worry about this. Usage:

        $ok = $modem->echo( $enable )

hangup()

Does what it is supposed to do. Hang up the phone thus terminating any active call. Usage:

        $ok = $modem->hangup();

is_active()

Can be used to check if there is a modem attached to your computer. If modem is alive and responding (on serial link, not to a remote call), is_active() returns true (1), otherwise returns false (0).

Test of modem activity is done through DSR (Data Set Ready) signal. If this signal is in off state, modem is probably turned off, or not working. From my tests I've found that DSR stays in "on" state after more or less one second I turn off my modem, so know you know that.

Example:

        if( $modem->is_active() ) {
                # Ok!
        } else {
                # Modem turned off?
        }

log()

Simple accessor to log object instanced at object creation time. Used internally. If you want to know the gory details, see Device::Modem::Log::* objects. You can also see the examples for how to log something without knowing all the gory details.

Hint: $modem->log->write('warning', 'ok, my log message here');

new()

Device::Modem constructor. This takes several options. A basic example:

        my $modem = Device::Modem->new( port => '/dev/ttyS0' );

if under Linux or some kind of unix machine, or

        my $modem = Device::Modem->new( port => 'COM1' );

if you are using a Win32 machine.

This builds the Device::Modem object with all the default parameters. This should be fairly usable if you want to connect to a real modem. Note that I'm testing it with a 3Com US Robotics 56K Message modem at 19200 baud and works ok.

List of allowed options:

offhook()

Takes the modem "off hook", ready to dial. Normally you don't need to use this. Also dial() goes automatically off hook before dialing.

parse_answer()

This method works like answer(), it accepts the same parameters, but it does not return the raw modem answer. Instead, it returns the answer string stripped of all CR/LF characters at the beginning and at the end.

parse_answer() is meant as an easy way of extracting result code (OK, ERROR, ...) and information strings that can be sent by modem in response to specific commands. Example:

        > AT xSHOW_MODELx<CR>
        US Robotics 56K Message
        OK
        >

In this example, OK is the result and US Robotics 56K Message is the informational message.

In fact, another difference with answer() is in the return value(s). Here are some examples:

        $modem->atsend( '?my_at_command?' );
        $answer = $modem->parse_answer();

where $answer is the complete response string, or:

        ($result, @lines) = $modem->parse_answer();

where $result is the OK or ERROR final message and @lines is the array of information messages (one or more lines). For the model example, $result would hold "OK" and @lines would consist of only 1 line with the string "US Robotics 56K Message".

port()

Used internally. Accesses the Device::SerialPort underlying object. If you need to experiment or do low-level serial calls, you may want to access this. Please report any usage of this kind, because probably (?) it is possible to include it in a higher level method.

As of 1.52, port() will automatically try to reconnect if it detects a bogus underlying port object. It will reconnect with the same options used when connect()ing the first time.

If no connection has taken place yet, then no automatic reconnection will be attempted.

repeat()

Repeats the last AT command issued. Usage:

        $ok = $modem->repeat()

reset()

Tries in any possible way to reset the modem to the starting state, hanging up all active calls, resending the initialization string and preparing to receive AT commands.

restore_factory_settings()

Restores the modem default factory settings. There are normally two main "profiles", two different memories for all modem settings, so you can load profile 0 and profile 1, that can be different depending on your modem manufacturer.

Usage:

        $ok = $modem->restore_factory_settings( [$profile] )

If no $profile is supplied, 0 is assumed as default value.

Check on your modem hardware manual for the meaning of these profiles.

S_register()

Gets or sets an S register value. These are some internal modem registers that hold important information that controls all modem behaviour. If you don't know what you are doing, don't use this method. Usage:

        $value = $modem->S_register( $reg_number [, $new_value] );

$reg_number ranges from 0 to 99 (sure?). If no $new_value is supplied, return value is the current register value. If a $new_value is supplied (you want to set the register value), return value is the new value or undef if there was an error setting the new value.

<!-- Qui &egrave; spiegata da cani -->

Examples:

        # Get value of S7 register
        $modem->S_register(7);

        # Set value of S0 register to 0
        $modem->S_register(0, 0);

send_init_string()

Sends the initialization string to the connected modem. Usage:

        $ok = $modem->send_init_string( [$init_string] );

If you specified an init_string as an option to new() object constructor, that is taken by default to initialize the modem. Else you can specify $init_string parameter to use your own custom intialization string. Be careful!

status()

Returns status of main modem signals as managed by Device::SerialPort (or Win32::SerialPort) objects. The signals reported are:

CTS

Clear to send

DSR

Data set ready

RING

Active if modem is ringing

RLSD

??? Released line ???

Return value of status() call is a hash, where each key is a signal name and each value is > 0 if signal is active, 0 otherwise. Usage:

        ...
        my %sig = $modem->status();
        for ('CTS','DSR','RING','RLSD') {
                print "Signal $_ is ", ($sig{$_} > 0 ? 'on' : 'off'), "\n";
        }

store_number()

Store telephone number in modem internal address book, to be dialed later (see dial() method). Usage:

        $ok = $modem->store_number( $position, $number )

where $position is the address book memory slot to store phone number (usually from 0 to 9), and $number is the number to be stored in the slot. Return value is true if operation was successful, false otherwise.

verbose()

Enables or disables verbose messages. This is managed automatically by Device::Modem object. Normally you should not need to worry about this. Usage:

        $ok = $modem->verbose( $enable )

wait()

Waits (yea) for a given amount of time (in milliseconds). Usage:

        $modem->wait( [$msecs] )

Wait is implemented via select system call. Don't know if this is really a problem on some platforms.

write_drain()

Only a simple wrapper around Device::SerialPort::write_drain method. Disabled for Win32 platform, that doesn't have that.

REQUIRES ^

Device::SerialPort (Win32::SerialPort for Win32 machines)

EXPORT ^

None

TO-DO ^

AutoScan

An AT command script with all interesting commands is run when `autoscan' is invoked, creating a `profile' of the current device, with list of supported commands, and database of brand/model-specific commands

Serial speed autodetect

Now if you connect to a different baud rate than that of your modem, probably you will get no response at all. It would be nice if Device::Modem could auto-detect the speed to correctly connect at your modem.

File transfers

It would be nice to implement [xyz]modem like transfers between two Device::Modem objects connected with two modems.

FAQ ^

There is a minimal FAQ document for this module online at http://www.streppone.it/cosimo/work/perl/CPAN/Device-Modem/FAQ.html

SUPPORT ^

Please feel free to contact me at my e-mail address cosimo@cpan.org for any information, to resolve problems you can encounter with this module or for any kind of commercial support you may need.

AUTHOR ^

Cosimo Streppone, cosimo@cpan.org

COPYRIGHT ^

(C) 2002-2014 Cosimo Streppone, cosimo@cpan.org

This library is free software; you can only redistribute it and/or modify it under the same terms as Perl itself.

SEE ALSO ^

Device::SerialPort, Win32::SerialPort, Device::Gsm, perl

syntax highlighting: