The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.
 / 
Device-RFXCOM-1.163170
River stage one • 1 direct dependent • 1 total dependent
1 ++
/ Device::RFXCOM::TX

NAME

Device::RFXCOM::TX - Module to support an RFXCOM RF transmitter

VERSION

version 1.163170

SYNOPSIS

  # for a USB-based device, transmitting X10 RF messages
  my $tx = Device::RFXCOM::TX->new(device => '/dev/ttyUSB0', x10 => 1);
  $tx->transmit(type => 'homeeasy', command => 'on',
                # ...
               );
  $tx->wait_for_ack() while ($tx->queue);

DESCRIPTION

Module to encode messages for an RFXCOM RF receiver. Module for sending RF messages with an RFXCOM transmitter.

IMPORTANT: This API is still subject to change.

METHODS

new(%parameters)

This constructor returns a new RFXCOM RF transmitter object. The supported parameters are:

device

The name of the device to connect to. The value can be a tty device name or hostname:port for a TCP-based RFXCOM transmitter.

The default is /dev/rfxcom-tx in anticipation of a scenario where a udev rule has been used to identify the USB tty device for the device. For example, a file might be created in /etc/udev/rules.d/91-rfxcom with a line like:

  SUBSYSTEM=="tty", SYSFS{idProduct}=="6001", SYSFS{idVendor}=="0403", SYSFS{serial}=="AnnnnABC", NAME="rfxcom-tx"

where the serial number attribute is obtained from the output from:

  udevinfo -a -p `udevinfo -q path -n /dev/ttyUSB0` | \
    sed -e'/ATTRS{serial}/!d;q'
init_callback

This parameter can be set to a callback to be called when the device initialization has been completed.

receiver_connected

This parameter should be set to a true value if a receiver is connected to the transmitter.

flamingo

This parameter should be set to a true value to enable the transmission for "flamingo" RF messages.

harrison

This parameter should be set to a true value to enable the transmission for "harrison" RF messages.

koko

This parameter should be set to a true value to enable the transmission for "klik-on klik-off" RF messages.

x10

This parameter should be set to a false value to disable the transmission for "x10" RF messages. This protocol is enable by default in keeping with the hardware default.

There is no option to enable homeeasy messages because they use either the klik-on klik-off protocol or homeeasy specific commands in order to trigger them.

receiver_connected()

Returns true if the transmitter is operating with a receiver connected.

flamingo()

Returns true if the transmitter is configured to transmit "flamingo" RF messages.

harrison()

Returns true if the transmitter is configured to transmit "harrison" RF messages.

koko()

Returns true if the transmitter is configured to transmit "klik-on klik-off" RF messages.

x10()

Returns true if the transmitter is configured to transmit "x10" RF messages. This attribute defaults to true.

transmit(%params)

This method sends an RF message to the device for transmission.

wait_for_ack($timeout)

This method blocks until a new message has been received by the device. When a message is received a data structure is returned that represents the data received.

IMPORTANT: This API is still subject to change.

THANKS

Special thanks to RFXCOM, http://www.rfxcom.com/, for their excellent documentation and for giving me permission to use it to help me write this code. I own a number of their products and highly recommend them.

SEE ALSO

RFXCOM website: http://www.rfxcom.com/

AUTHOR

Mark Hindess <soft-cpan@temporalanomaly.com>

COPYRIGHT AND LICENSE

This software is copyright (c) 2014 by Mark Hindess.

This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.