View on
Dana Jacobsen > Math-Prime-Util > Math::Prime::Util::PrimeArray



Annotate this POD



Open  0
View/Report Bugs
Module Version: 0.67   Source  


Math::Prime::Util::PrimeArray - A tied array for primes


Version 0.67


  # Use package and create a tied variable
  use Math::Prime::Util::PrimeArray;
  tie my @primes, 'Math::Prime::Util::PrimeArray';

  # or all in one (allowed: @primes, @prime, @pr, @p):
  use Math::Prime::Util::PrimeArray '@primes';

  # Use in a loop by index:
  for my $n (0..9) {
    print "prime $n = $primes[$n]\n";

  # Use in a loop over array:
  for my $p (@primes) {
    last if $p > 1000;   # stop sometime
    print "$p\n";

  # Use via array slice:
  print join(",", @primes[0..49]), "\n";

  # Use via each:
  use 5.012;
  while( my($index,$value) = each @primes ) {
    last if $value > 1000;   # stop sometime
    print "The ${index}th prime is $value\n";

  # Use with shift:
  while ((my $p = shift @primes) < 1000) {
    print "$p\n";


An array that acts like the infinite set of primes. This may be more convenient than using Math::Prime::Util directly, and in some cases it can be faster than calling next_prime and prev_prime.

If the access pattern is ascending or descending, then a window is sieved and results returned from the window as needed. If the access pattern is random, then nth_prime is used.

Shifting acts like the array is losing elements at the front, so after two shifts, $primes[0] == 5. Unshift will move the internal shift index back one, unless given an argument which is the number to move back. It will not shift past the beginning, so unshift @primes, ~0 is a useful way to reset from any shifts.


  say shift @primes;     # 2
  say shift @primes;     # 3
  say shift @primes;     # 5
  say $primes[0];        # 7
  unshift @primes;       #     back up one
  say $primes[0];        # 5
  unshift @primes, 2;    #     back up two
  say $primes[0];        # 2

If you want sequential primes with low memory, I recommend using "forprimes" in Math::Prime::Util. It is much faster, as the tied array functionality in Perl is not high performance. It isn't as flexible as the prime array, but it is a very common pattern.

If you prefer an iterator pattern, I would recommend using "prime_iterator" in Math::Prime::Util. It will be a bit faster than using this tied array, but of course you don't get random access. If you find yourself using the shift operation, consider the iterator.


The size of the array will always be shown as 2147483647 (IV32 max), even in a 64-bit environment where primes through 2^64 are available.

Perl will mask all array arguments to 32-bit, making 2^32-1 the maximum prime through the standard array interface. It will silently wrap after that. The only way around this is using the object interface:

    use Math::Prime::Util::PrimeArray;
    my $o = tie my @primes, 'Math::Prime::Util::PrimeArray';
    say $o->FETCH(2**36);

Here we store the object returned by tie, allowing us to call its FETCH method directly. This is actually faster than using the array.

Some people find the idea of shifting a prime array abhorrent, as after two shifts, "the second prime is 7?!". If this bothers you, do not use shift on the tied array.


  sumprimes:      sum_primes(nth_prime(100_000))
  MPU forprimes:  forprimes { $sum += $_ } nth_prime(100_000);
  MPU iterator:   my $it = prime_iterator; $sum += $it->() for 1..100000;
  MPU array:      $sum = vecsum( @{primes(nth_prime(100_000))} );
  MPUPA:          tie my @prime, ...; $sum += $prime[$_] for 0..99999;
  MPUPA-FETCH:    my $o=tie my @pr, ...; $sum += $o->FETCH($_) for 0..99999;
  MNSP:           my $seq = Math::NumSeq::Primes->new;
                  $sum += ($seq->next)[1] for 1..100000;
  MPTA:           tie my @prime, ...; $sum += $prime[$_] for 0..99999;
  List::Gen       $sum = primes->take(100000)->sum

Memory use is comparing the delta between just loading the module and running the test. Perl 5.20.0, Math::NumSeq v70, Math::Prime::TiedArray v0.04, List::Gen 0.974.

Summing the first 0.1M primes via walking the array:

       .3ms    56k    Math::Prime::Util      sumprimes
       4ms     56k    Math::Prime::Util      forprimes
       4ms    4 MB    Math::Prime::Util      sum big array
      31ms      0     Math::Prime::Util      prime_iterator
      68ms    644k    MPU::PrimeArray        using FETCH
     101ms    644k    MPU::PrimeArray        array
      95ms   1476k    Math::NumSeq::Primes   sequence iterator
    4451ms   32 MB    List::Gen              sequence
    6954ms   61 MB    Math::Prime::TiedArray (extend 1k)

Summing the first 1M primes via walking the array:

      0.005s  268k    Math::Prime::Util      sumprimes
      0.05s   268k    Math::Prime::Util      forprimes
      0.05s  41 MB    Math::Prime::Util      sum big array
      0.3s      0     Math::Prime::Util      prime_iterator
      0.7s    644k    MPU::PrimeArray        using FETCH
      1.0s    644k    MPU::PrimeArray        array
      6.1s   2428k    Math::NumSeq::Primes   sequence iterator
    106.0s   93 MB    List::Gen              sequence
     98.1s  760 MB    Math::Prime::TiedArray (extend 1k)

Summing the first 10M primes via walking the array:

      0.07s   432k    Math::Prime::Util      sumprimes
      0.5s    432k    Math::Prime::Util      forprimes
      0.6s  394 MB    Math::Prime::Util      sum big array
      3.2s      0     Math::Prime::Util      prime_iterator
      6.8s    772k    MPU::PrimeArray        using FETCH
     10.2s    772k    MPU::PrimeArray        array
   1046  s  11.1MB    Math::NumSeq::Primes   sequence iterator
   6763  s  874 MB    List::Gen              sequence
          >5000 MB    Math::Primes::TiedArray (extend 1k)

Math::Prime::Util offers four obvious solutions: the sum_primes function, a big array, an iterator, and the forprimes construct. The big array is fast but uses a lot of memory, forcing the user to start programming segments. Using the iterator avoids all the memory use, but isn't as fast (this may improve in a later release, as this is a new feature). The forprimes construct is both fast and low memory, but it isn't quite as flexible as the iterator (e.g. it doesn't lend itself to wrapping inside a filter).

Math::NumSeq::Primes offers an iterator alternative, and works quite well as long as you don't need lots of primes. It does not support random access. It has reasonable performance for the first few hundred thousand, but each successive value takes much longer to generate, and once past 1 million it isn't very practical. Internally it is sieving all primes up to n every time it makes a new segment which is why it slows down so much.

List::Gen includes a built-in prime sequence. It uses an inefficient Perl sieve for numbers below 10M, trial division past that. It uses too much time and memory to be practical for anything but very small inputs. It also gives incorrect results for large inputs (RT 105758).

Math::Primes::TiedArray is remarkably impractical for anything other than tiny numbers.


This module uses Math::Prime::Util to do all the work. If you're doing anything but retrieving primes, you should examine that module to see if it has functionality you can use directly, as it may be a lot faster or easier.

Similar functionality can be had from Math::NumSeq and Math::Prime::TiedArray.


Dana Jacobsen <>


Copyright 2012-2016 by Dana Jacobsen <>

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

syntax highlighting: