Steffen Müller > SOOT > SOOT::Examples::Geometry

Download:
SOOT-0.17.tar.gz

Annotate this POD

View/Report Bugs
Source  

NAME ^

SOOT::Examples::Geometry - SOOT Examples for Geometry

DESCRIPTION ^

This is a listing of all SOOT examples for Geometry.

EXAMPLES ^

assembly.pl

  use strict;
  use SOOT ':all';
  use Math::Trig;
  
  #--- Definition of a simple geometry
  $gSystem->Load("libGeom");
  $gSystem->Load("libGeomBuilder");
  $gSystem->Load("libGeomPainter");
  SOOT->UpdateClasses();
  
  my $geom = TGeoManager->new("Assemblies", "Geometry using assemblies");
  
  #--- define some materials
  my $matVacuum = TGeoMaterial->new("Vacuum", 0,0,0);
  my $matAl     = TGeoMaterial->new("Al", 26.98,13,2.7);
  
  #--- define some media
  my $Vacuum = TGeoMedium->new("Vacuum",    1, $matVacuum);
  my $Al     = TGeoMedium->new("Aluminium", 2, $matAl);
  
  #--- make the top container volume
  my $top = $geom->MakeBox("TOP", $Vacuum, 1000., 1000., 100.);
  $geom->SetTopVolume($top);
  
  # Make the elementary assembly of the whole structure
  my $tplate = TGeoVolumeAssembly->new("TOOTHPLATE"); # FIXME This segfaults!?
  
  my $ntooth = 5;
  my $xplate = 25.0;
  my $yplate = 50.0;
  my $xtooth = 10.0;
  my $ytooth = 0.5*$yplate/$ntooth;
  my $dshift = 2.*$xplate + $xtooth;
  
  my $plate = $geom->MakeBox("PLATE", $Al, $xplate, $yplate, 1);
  $plate->SetLineColor(kBlue);
  
  my $tooth = $geom->MakeBox("TOOTH", $Al, $xtooth, $ytooth, 1);
  $tooth->SetLineColor(kBlue);
  $tplate->AddNode($plate, 1);
  
  my ($xt, $yt);
  for my $i (0..$ntooth)
  {
    $xt = $xplate + $xtooth;
    $yt = -$yplate + (4*$i+1)*$ytooth;
    $tplate->AddNode($tooth, $i+1, TGeoTranslation->new($xt,$yt,0)->keep);
    $xt = -$xplate-$xtooth;
    $yt = -$yplate + (4*$i+3)*$ytooth;
    $tplate->AddNode($tooth, $ntooth+$i+1, TGeoTranslation->new($xt,$yt,0)->keep);
  }
  
  my $rot1 = TGeoRotation->new();
  $rot1->RotateX(90);
  my $rot;
  my $trans;
  
  # Make a hexagone cell out of 6 toothplates. These can zip togeather
  # without generating overlaps (they are self-contained)
  my $cell = TGeoVolumeAssembly->new("CELL");
  for my $i (0..6) {
    my    $phi = 60.*$i;
    my $phirad = deg2rad($phi);
    my     $xp = $dshift*sin($phirad);
    my     $yp = -$dshift*cos($phirad);
    $rot = TGeoRotation->new($rot1);
    $rot->RotateZ($phi);
    $trans = TGeoCombiTrans->new($xp,$yp,0,$rot);
    $cell->AddNode($tplate, $i+1, $trans); # FIXME SEGV here
  }
  
  # Make a row as an assembly of cells, then combine rows in a honeycomb
  # structure. This again works without any need to define rows as "overlapping"
  my $row = TGeoVolumeAssembly->new("ROW");
  my $ncells = 5;
  for my $i (0..$ncells-1) {
    my $ycell = (2*$i+1)*($dshift+10);
    $row->AddNode($cell, $ncells+$i+1, TGeoTranslation->new(0,$ycell,0)->keep);
    $row->AddNode($cell, $ncells-$i,   TGeoTranslation->new(0,-$ycell,0)->keep);
  }
  
  my $dxrow = 3.*($dshift+10.)*tan(deg2rad(30.0));
  my $dyrow = $dshift+10.;
  my $nrows = 5;
  for my $i (0..$nrows)
  {
    my $xrow = 0.5*(2*$i+1)*$dxrow;
    my $yrow = 0.5*$dyrow;
    if (($i%2)==0) {
      $yrow = -$yrow;
    }
    $top->AddNode($row, $nrows+$i+1, TGeoTranslation->new($xrow,$yrow,0)->keep);
    $top->AddNode($row, $nrows-$i,    TGeoTranslation->new(-$xrow,-$yrow,0)->keep);
  }
  
  #--- close the geometry
  $geom->CloseGeometry();
  
  $geom->SetVisLevel(4);
  $geom->SetVisOption(0);
  $top->Draw();
  
  $gApplication->Run;

nucleus.pl

  use strict;
  use warnings;
  use SOOT ':all';
  use Math::Trig; 
  
  $gSystem->Load("libGeom");
  $gSystem->Load("libGeomBuilder");
  $gSystem->Load("libGeomPainter");
  SOOT->UpdateClasses();
  
  # use TGeo classes to draw a model of a nucleus
  # 
  # Author: Otto Schaile
  my $nProtons  = shift || 40;
  my $nNeutrons = shift || 60;
  
  my $NeutronRadius = 60;
  my $ProtonRadius = 60;
  my $NucleusRadius;
  my $distance = 60;
  
  my $vol = $nProtons + $nNeutrons;
  $vol = 3 * $vol / (4 * pi);
  
  $NucleusRadius = $distance * $vol**(1./3.);
  
  my $geom = TGeoManager->new("nucleus", "Model of a nucleus");
  $geom->SetNsegments(40);
  my $matEmptySpace = TGeoMaterial->new("EmptySpace", 0, 0, 0);
  my $matProton     = TGeoMaterial->new("Proton"    , .938, 1., 10000.);
  my $matNeutron    = TGeoMaterial->new("Neutron"   , .935, 0., 10000.);
  
  my $EmptySpace = TGeoMedium->new("Empty", 1, $matEmptySpace);
  my $Proton     = TGeoMedium->new("Proton", 1, $matProton);
  my $Neutron    = TGeoMedium->new("Neutron",1, $matNeutron);
  
  #  the space where the nucleus lives (top container volume)
  
  my $worldx = 200.;
  my $worldy = 200.;
  my $worldz = 200.;
  
  my $top = $geom->MakeBox("WORLD", $EmptySpace, $worldx, $worldy, $worldz); 
  $geom->SetTopVolume($top);
  
  my $proton  = $geom->MakeSphere("proton",  $Proton,  0., $ProtonRadius); 
  my $neutron = $geom->MakeSphere("neutron", $Neutron, 0., $NeutronRadius); 
  $proton->SetLineColor(kRed);
  $neutron->SetLineColor(kBlue);
  
  my ($x, $y, $z); 
  my $i = 0; 
  while ($i < $nProtons) {
    $x = $gRandom->Gaus(0.0, 1.0);
    $y = $gRandom->Gaus(0.0, 1.0);
    $z = $gRandom->Gaus(0.0, 1.0);
    printf "%f %f %f\n", $x, $y, $z;
    if (sqrt($x**2 + $y**2 + $z**2) < 1) {
       $x = (2 * $x - 1) * $NucleusRadius;
       $y = (2 * $y - 1) * $NucleusRadius;
       $z = (2 * $z - 1) * $NucleusRadius;
       my $trans = TGeoTranslation->new($x*1.0, $y*1.0, $z*1.0)->keep;
       $top->AddNode($proton, $i, $trans);
       $i++;
    }
  }
  $i = 0; 
  while ($i < $nNeutrons) {
    $x = $gRandom->Gaus(0.0, 1.0);
    $y = $gRandom->Gaus(0.0, 1.0);
    $z = $gRandom->Gaus(0.0, 1.0);
    if (sqrt($x**2 + $y**2 + $z**2) < 1) {
       $x = (2 * $x - 1) * $NucleusRadius;
       $y = (2 * $y - 1) * $NucleusRadius;
       $z = (2 * $z - 1) * $NucleusRadius;
       my $trans = TGeoTranslation->new($x*1.0, $y*1.0, $z*1.0)->keep;
       $top->AddNode($neutron, $i + $nProtons, $trans);
       $i++;
    }
  }
  $geom->CloseGeometry();
  $geom->SetVisLevel(4);
  $top->Draw("ogl");
  
  $gApplication->Run;

shapes.pl

  use strict;
  use warnings;
  use SOOT ':all';
  
  $gSystem->Load("libGeom");
  $gSystem->Load("libGeomBuilder");
  $gSystem->Load("libGeomPainter");
  SOOT->UpdateClasses();
  
  $gROOT->Reset();
  my $c1 = TCanvas->new('c1', 'Geometry Shapes', 200, 10, 700, 500);
  
  #  Define some volumes
  my $brik = TBRIK->new('BRIK', 'BRIK', 'void', 200, 150, 150);
  my $trd1 = TTRD1->new('TRD1', 'TRD1', 'void', 200, 50, 100, 100);
  my $trd2 = TTRD2->new('TRD2', 'TRD2', 'void', 200, 50, 200, 50, 100);
  my $trap = TTRAP->new('TRAP', 'TRAP', 'void', 190, 0, 0, 60, 40, 90, 15, 120, 80, 180, 15);
  my $para = TPARA->new('PARA', 'PARA', 'void', 100, 200, 200, 15, 30, 30);
  my $gtra = TGTRA->new('GTRA', 'GTRA', 'void', 390, 0, 0, 20, 60, 40, 90, 15, 120, 80, 180, 15);
  my $tube = TTUBE->new('TUBE', 'TUBE', 'void', 150, 200, 400);
  my $tubs = TTUBS->new('TUBS', 'TUBS', 'void', 80, 100, 100, 90, 235);
  my $cone = TCONE->new('CONE', 'CONE', 'void', 100, 50, 70, 120, 150);
  my $cons = TCONS->new('CONS', 'CONS', 'void', 50, 100, 100, 200, 300, 90, 270);
  my $sphe  = TSPHE->new('SPHE',  'SPHE',  'void', 25, 340, 45, 135,  0, 270);
  my $sphe1 = TSPHE->new('SPHE1', 'SPHE1', 'void',  0, 140,  0, 180,  0, 360);
  my $sphe2 = TSPHE->new('SPHE2', 'SPHE2', 'void',  0, 200, 10, 120, 45, 145);
  
  my $pcon = TPCON->new('PCON', 'PCON', 'void', 180, 270, 4);
  $pcon->DefineSection(0, -200, 50, 100);
  $pcon->DefineSection(1,  -50, 50,  80);
  $pcon->DefineSection(2,   50, 50,  80);
  $pcon->DefineSection(3,  200, 50, 100);
  
  my $pgon = TPGON->new('PGON', 'PGON', 'void', 180, 270, 8, 4);
  $pgon->DefineSection(0, -200, 50, 100);
  $pgon->DefineSection(1,  -50, 50,  80);
  $pgon->DefineSection(2,   50, 50,  80);
  $pgon->DefineSection(3,  200, 50, 100);
  
  #  Set shapes attributes
  $brik->SetLineColor(1);
  $trd1->SetLineColor(2);
  $trd2->SetLineColor(3);
  $trap->SetLineColor(4);
  $para->SetLineColor(5);
  $gtra->SetLineColor(7);
  $tube->SetLineColor(6);
  $tubs->SetLineColor(7);
  $cone->SetLineColor(2);
  $cons->SetLineColor(3);
  $pcon->SetLineColor(6);
  $pgon->SetLineColor(2);
  $sphe->SetLineColor(1);
  $sphe1->SetLineColor(2);
  $sphe2->SetLineColor(4);
  
  #  Build the geometry hierarchy
  my $node1 = TNode->new('NODE1', 'NODE1', 'BRIK');
  $node1->cd();
  
  my $node2  = TNode->new( 'NODE2',  'NODE2', 'TRD1',     0,     0, -1000);
  my $node3  = TNode->new( 'NODE3',  'NODE3', 'TRD2',     0,     0,  1000);
  my $node4  = TNode->new( 'NODE4',  'NODE4', 'TRAP',     0, -1000,     0);
  my $node5  = TNode->new( 'NODE5',  'NODE5', 'PARA',     0,  1000,     0);
  my $node6  = TNode->new( 'NODE6',  'NODE6', 'TUBE', -1000,     0,     0);
  my $node7  = TNode->new( 'NODE7',  'NODE7', 'TUBS',  1000,     0,     0);
  my $node8  = TNode->new( 'NODE8',  'NODE8', 'CONE',  -300,  -300,     0);
  my $node9  = TNode->new( 'NODE9',  'NODE9', 'CONS',   300,   300,     0);
  my $node10 = TNode->new('NODE10', 'NODE10', 'PCON',     0, -1000, -1000);
  my $node11 = TNode->new('NODE11', 'NODE11', 'PGON',     0,  1000,  1000);
  my $node12 = TNode->new('NODE12', 'NODE12', 'GTRA',     0,  -400,   700);
  my $node13 = TNode->new('NODE13', 'NODE13', 'SPHE',    10,  -400,   500);
  my $node14 = TNode->new('NODE14', 'NODE14', 'SPHE1',   10,   250,   300);
  my $node15 = TNode->new('NODE15', 'NODE15', 'SPHE2',   10,  -100,  -200);
  
  # Draw this geometry in the current canvas
  $node1->cd();
  $node1->Draw();
  $c1->Update();
  
  $c1->GetViewer3D;
  
  $gApplication->Run;

SEE ALSO ^

SOOT

AUTHOR ^

Steffen Mueller, <smueller@cpan.org>

COPYRIGHT AND LICENSE ^

Copyright (C) 2010 by Steffen Mueller

SOOT, the Perl-ROOT wrapper, is free software; you can redistribute it and/or modify it under the same terms as ROOT itself, that is, the GNU Lesser General Public License. A copy of the full license text is available from the distribution as the LICENSE file.

syntax highlighting: