NAME

Audio::DSP - Perl interface to *NIX digital audio device.

SYNOPSIS

    use Audio::DSP;

    ($buf, $chan, $fmt, $rate) = (4096, 1, 8, 8192);

    $dsp = new Audio::DSP(buffer   => $buf,
                          channels => $chan,
                          format   => $fmt,
                          rate     => $rate);

    $seconds = 5;
    $length  = ($chan * $fmt * $rate * $seconds) / 8;

    $dsp->init() || die $dsp->errstr();

    # Record 5 seconds of sound
    for (my $i = 0; $i < $length; $i += $buf) {
        $dsp->read() || die $dsp->errstr();
    }

    # Play it back
    for (;;) {
        $dsp->write() || last;
    }

    $dsp->close();

DESCRIPTION

Audio::DSP is built around the OSS (Open Sound System) API and allows perl to interface with a digital audio device. It provides, among other things, an initialization method which opens and handles ioctl messaging on the audio device file. Audio::DSP also provides some rudimentary methods for the storage and manipulation of audio data in memory.

In order to use Audio::DSP, you'll need to have the necessary OSS drivers/libraries installed. OSS is available for many popular Unices, and a GPLed version (with which this extension was initially developed and tested) is distributed with with the Linux kernel.

CONSTRUCTOR

new([params])

Returns blessed Audio::DSP object. Parameters:

device

Name of audio device file. Default is '/dev/dsp'.

buffer

Length of buffer, in bytes, for reading from/writing to the audio device file. Default is 4096.

rate

Sampling rate in bytes per second. This parameter affects, among other things, the highest frequency in the sampled signal, which must be less than half the sample rate. Compact discs use a 44100 samples per second sampling rate.

Default sample rate is 8192.

format

Sample format. This parameter affects not only the size and the byte-order of a sample, but also its dynamic range.

Sample format may be directly specified as an integer (e.g. 8 or 16) or as one of the format constants defined in soundcard.h and exported by Audio::DSP on use. The latter is preffered; an integer value of 16 (for example) corresponds to little endian signed 16 (AFMT_S16_LE), which format may or may not work with your card. So be careful.

If the format constant is passed as a string (e.g. 'AFMT_U8' rather than AFMT_U8), it will work, but this feature is deprecated. It has been retained for backward-compatibility, but do not assume that it will be present in future versions.

Default sample format is AFMT_U8.

channels

1 (mono) or 2 (stereo). Default is 1.

file

File from which to read raw sound data to be stored in memory.

No effort is made to interpret the type of file being read. It's up to you to set the appropriate rate, channel, and format parameters if you wish to write the sound data to your audio device without damaging your hearing.

METHODS

Opening and closing the device

init([params])

Opens and initializes audio device file. Parameters device, buffer, rate, format, and channels are shared with the constructor, and will override them. Additional parameters:

mode

Integer mode in which to open audio device file. Specifying the modes 'O_RDWR', 'O_RDONLY', and 'O_WRONLY' as strings will work, but this feature is deprecated. Use the Fcntl.pm constants to obtain the approriate integer mode values instead.

The default value is O_RDWR.

Example:

    $dsp->init(mode => O_RDONLY) || die $dsp->errstr();

Returns true on success, false on error.

open([mode])

Opens audio device file, does not send any ioctl messages. Default mode is O_RDWR.

Example:

    $dsp->open(O_RDONLY) || die $dsp->errstr();

Returns true on success, false on error.

close()

Closes audio device file. Returns true on success, false on error.

Dealing with data in memory

audiofile($filename)

Reads data from specified file and stores it in memory. If there is sound data stored already in memory, the file data will be concatenated onto the end of it.

No effort is made to interpret the type of file being read. It's up to you to set the appropriate rate, channel, and format parameters if you wish to write the sound data to your audio device without damaging your hearing.

    $dsp->audiofile('foo.raw') || die $dsp->errstr();

Returns true on success, false on error.

read()

Reads buffer length of data from audio device file and appends it to the audio data stored in memory. Returns true on success, false on error.

write()

Writes buffer length of sound data currently stored in memory, starting at the current play mark offset, to audio device file. Play mark is incremented one buffer length. Returns true on success, false on error or if the play mark exceeds the length of audio data stored in memory.

clear()

Clears audio data currently stored in memory, sets play mark to zero. No return value.

data()

Returns sound data stored in memory.

    open RAWFILE, '>foo.raw';
    print RAWFILE $dsp->data();
    close RAWFILE;
datacat($data)

Concatenates argument (a string) to audio data stored in memory. Returns length of audio data currently stored.

datalen()

Returns length of audio data currently stored in memory.

setbuffer([$length])

Sets read/write buffer if argument is provided.

Returns buffer length currently specified.

setmark([$mark])

Sets play mark if argument is provided. The play mark indicates how many bites of audio data stored in memory have been written to the audio device file since the mark was last set to zero. This lets the write() method know what to write.

Returns current play mark.

Reading/writing data directly to/from the device

These methods are provided mainly for the purposes of anyone wishing to delve into hard-disk recording.

dread([$length])

Reads length of data from audio device file and returns it. If length is not supplied, a "buffer length" of data (as specified when the constructor/init() method was called) is read. If there is an error reading from the device file, a false value is returned.

dwrite($data)

Writes data directly to audio device. Returns true on success, false on error.

I/O Control

The device must be opened with init() or open() before calling any of the following methods.

It is important to set sampling parameters in the following order: setfmt(), channels(), speed(). Setting sampling rate (speed) before number of channels does not work with all devices, according to OSS documentation. The safe alternative is to call init() with the appropriate parameters.

post()

Sends SNDCTL_DSP_POST ioctl message to audio device file. Returns true on success, false on error.

reset()

Sends SNDCTL_DSP_RESET ioctl message to audio device file. Returns true on success, false on error.

sync()

Sends SNDCTL_DSP_SYNC ioctl message to audio device file. Returns true on success, false on error.

setfmt($format)

Sends SNDCTL_DSP_SETFMT ioctl message to audio device file, with sample format as argument. Returns sample format to which the device was actually set if successful, false on error. You should check the return value even on success to ensure the requested sample format was in fact set for the device.

    my $format = AFMT_S16_LE; # signed 16-bit, little-endian
    my $rv     = $dsp->setfmt($format) || die $dsp->errstr;

    die "Failed to set requested sample format"
        unless ($format == $rv);
channels($channels)

Sends SNDCTL_DSP_CHANNELS ioctl message to audio device file, with number of channels as argument. Returns number of channels to which the device was actually set if successful, false on error. You should check the return value even on success to ensure the requested number of channels were in fact set for the device.

    my $chan = 2; # stereo
    my $rv   = $dsp->channels($chan) || die $dsp->errstr;

    die "Failed to set requested number of channels"
        unless ($chan == $rv);
speed($rate)

Sends SNDCTL_DSP_SPEED ioctl message to audio device file, with sample rate as argument. Returns sample rate to which the device was actually set if successful, false on error. You should check the return value even on success to ensure the requested sample rate was in fact set for the device.

    my $rate = 44100; # CD-quality sample rate
    my $rv   = $dsp->speed($rate) || die $dsp->errstr;

    die "Failed to set requested sample rate"
        unless ($rate == $rv);
setduplex()

Sends SNDCTL_DSP_SETDUPLEX ioctl message to audio device file. Returns true on success, false on error.

Misc

errstr()

Returns last recorded error.

Deprecated methods

The following methods exist for transitional compatibility with version 0.01 and may not be available in future versions.

The preferred alternative to the set* methods below is either to:

1. close the device and call init() with the appropriate parameters or:
2. call the appropriate I/O control methods after having closed/re-opened the device, or after having called reset()

The second should only be performed if you know what you are doing. It is important, for example, to set sampling parameters in the following order: setfmt(), channels(), speed(). Setting sampling rate (speed) before number of channels does not work with all devices, according to OSS documentation.

getformat($format)

Returns true if specified sample format is supported by audio device. A false value may indicate the format is not supported, but it may also mean that the SNDCTL_DSP_GETFMTS ioctl failed (the init() method must be called before this method), etc. Be sure to check the last error message in this case.

Deprecated. If you wish to check if a given format is supported by the device, instead call getfmts() method, then AND the return value with the format for which you wish to check.

    my $format = AFMT_S16_LE;
    my $mask   = $dsp->getfmts;

    print "Format is supported!\n"
        if ($format & $mask);
queryformat()

Returns currently used format of initialized audio device. Unlike the setformat() method, queryformat "asks" the audio device directly which format is being used.

Deprecated. If you wish to find the format to which the device is currently set, instead call setfmt() with AFMT_QUERY as an argument and check the return value.

    my $format = $dsp->setfmt(AFMT_QUERY);
    print "Device set to format $format.\n";
setchannels([$channels])

Deprecated. See introduction to this section for alternative methods.

Sets number of channels if argument is provided. If the audio device file is open, the number of channels will not actually be changed until you call close() and init() again.

Returns number of channels currently specified.

setdevice([$device_name])

Deprecated. See introduction to this section for alternative methods.

Sets audio device file if argument is provided. If the device is open, it will not actually be changed until you call close() and init() again.

Returns audio device file name currently specified.

setformat([$bits])

Deprecated. See introduction to this section for alternative methods.

Sets sample format if argument is provided. If the audio device file is open, the sample format will not actually be changed until you call close() and init() again.

Returns sample format currently specified.

setrate([$rate])

Deprecated. See introduction to this section for alternative methods.

Sets sample rate if argument is provided. If the audio device file is open, the sample rate will not actually be changed until you call close() and init() again.

Returns sample rate currently specified.

CONSTANTS

The following audio-format constants are exported by Audio::DSP on use:

AFMT_MU_LAW

logarithmic mu-Law

AFMT_A_LAW

logarithmic A-Law

AFMT_IMA_ADPCM

4:1 compressed (IMA)

AFMT_U8

8 bit unsigned

AFMT_S16_LE

16 bit signed little endian (Intel - used in PC soundcards)

AFMT_S16_BE

16 bit signed big endian (PPC, Sparc, etc)

AFMT_S8

8 bit signed

AFMT_U16_LE

16 bit unsigned little endian

AFMT_U16_BE

16 bit unsigned bit endian

AFMT_MPEG

MPEG (not currently supported by OSS)

NOTES

Audio::DSP does not provide any methods for converting the raw audio data stored in memory into other formats (that's another project altogether). You can, however, use the data() method to dump the raw audio to a file, then use a program like sox to convert it to your favorite format. If you are interested in writing .wav files, you may want to take a look at Nick Peskett's Audio::Wav module.

AUTHOR

Seth David Johnson, seth@pdamusic.com

SEE ALSO

Open Sound System homepage:

    http://www.opensound.com/

Open Sound System - Audio programming:

    http://www.opensound.com/pguide/audio.html

OSS Programmer's guide (PDF):

    http://www.opensound.com/pguide/oss.pdf

A GPLed version of OSS distributed with the Linux kernel was used in the development of Audio::DSP. See "The Linux Sound Subsystem":

    http://www.linux.org.uk/OSS/

To my knowledge, the Advanced Linux Sound Architecture (ALSA) API is supposed to remain compatible with the OSS API on which this extension is built. ALSA homepage:

    http://www.alsa-project.org/

perl(1).

COPYRIGHT

Copyright (c) 1999-2000 Seth David Johnson. All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.