NAME

Log::Agent - logging agent

SYNOPSIS

 use Log::Agent;            # in all reusable components
 logerr "error";
 logtrc "notice:12", "notice that" if ...;
 logdie "log and die";

 use Log::Agent;            # in application's main
 logconfig(-prefix => $0);  # simplest, uses default driver

 use Log::Agent;                    # another more complex example
 require Log::Agent::Driver::File;  # logging made to file
 logconfig(-driver =>
     Log::Agent::Driver::File->make(
         -prefix      => $0,
         -showpid     => 1,
         -channels    => {
             'error'  => "$0.err",
             'output' => "$0.out",
             'debug'  => "$0.dbg",
         },
     )
 );

DESCRIPTION

The Log::Agent module provides an abstract layer for logging and tracing, which is independent from the actual method used to physically perform those activities. It acts as an agent (hence the name) that collects the requests and delegates processing to a sublayer: the logging driver.

The Log::Agent module is meant to be used in all reusable components, since they cannot know in advance how the application which ends up using them will perform its logging activities: either by emitting messages on stdout and errors on stderr, or by directing messages to logfiles, or by using syslog(3).

The logging interface is common for all the logging drivers, and is therefore the result of a compromise between many logging schemes: any information given at this level must be either handled by all drivers, or may be ignored depending on the application's final choice.

PRIORITIES AND LEVEL

The Log::Agent module can use both priorities (as defined by syslog(3)) or logging levels, or either, in which case there is an implicit computation of the missing item (i.e. the level 4, for instance, corresponds to the "warning" priority, and vice-versa). See Log::Agent::Priorities for more details.

A logging level is defined as being a threshold: any level lesser than or equal to that threshold will be logged.

At the Log::Agent level, it is possible to define a trace level and a debug level. Only the messages below those levels (inclusive) will be handed out to the underlying driver for logging. They are used by the logtrc() and logdbg() routines, respectively.

CHANNELS

The Log::Agent class defines three logging channels, which are error, output and debug. Depending on the driver used for logging, those channels are ignored (typically with syslog()) or may be implicitely defined (default logging, i.e. the one achieved by the Log::Agent::Driver::Default driver, remaps error and debug to stderr, output to stdout).

INTERFACE

Anywhere a message is expected, it can be a single string, or a printf()-like format string followed by the required arguments. The special macro %m is handled directly by Log::Agent and is replaced by the string version of $!, which is the last error message returned by the last failing system call.

NOTE: There should not be any trailing "\n" in the message strings, nor any embededed one, although this is not enforced. Remember that the main purpose of Log::Agent is to specify logging messages in a standard way! Therefore, most of the time, a "should" should be read as "must" and "should not" as "must not", which is the strongest interdiction form available in English, as far as I know.

Here are valid message examples:

    "started since $time"
    "started since %s", $time
    "fork: %m"

The follwing logging interface is made available to modules:

logdbg priority, message

Debug logging of message to the debug channel.

You may specify any priority you want, i.e. a debug priority is not enforced here. You may even specify "notice:4" if you wish, to have the message logged if the debug level is set to 4 or less. If handed over to syslog(3), the message will nonetheless be logged at the notice priority.

logtrc priority, message

Trace logging of message to the output channel.

Like logdbg() above, you are not restricted to the info priority. This routine checks the logging level (either explicit as in "info:14" or implicit as in "notice") against the trace level.

logdebug message

Log the message at the debug priority to the output channel.

The difference with logdbg() is twofold: logging is done on the output channel, not the debug one, and the priority is implicit.

loginfo message

Log the message at the info priority to the output channel.

logsay message

Log the message at the notice priority to the output channel. The logging always takes place under the default -trace settings, but only if the routine is called, naturally. This means you can still say:

    logsay "some trace message" if $verbose;

and control whether the message is emitted by using some external configuration for your module (e.g. by adding a -verbose flag to the creation routine of your class).

logwarn message

Log a warning message at the warning priority to the error channel.

logcarp message

Same as logwarn(), but issues a Carp::carp(3) call instead, which will warn from the perspective of the routine's caller.

logcluck message

Same as logwarn(), but dumps a full stacktrace as well.

logerr message

Log an error message at the error priority to the error channel.

logdie message

Log a fatal message at the critical priority to the error channel, and then dies.

logconfess message

Same as logdie(), but issues a Carp::confess(3) call instead. It is possible to configure the Log::Agent module via the -confess switch to automatically redirect a logdie() to logconfess(), which is invaluable during unit testing.

logcroak message

Same as logdie(), but issues a Carp::croak(3) call instead. It is possible to configure the Log::Agent module via the -confess switch to automatically redirect a logcroak() to logconfess(), which is invaluable during unit testing.

Log::Agent::inited

Returns true when Log::Agent was initialized, either explicitly via a logconfig() or implicitely via any logxxx() call.

Modules sometimes wish to report errors from the perspective of their caller's caller, not really their caller. The following interface is therefore provided:

logxcarp offset, message

Same a logcarp(), but with an additional offset to be applied on the stack. To warn one level above your caller, set it to 1.

logxcroak offset, message

Same a logcroak(), but with an additional offset to be applied on the stack. To report an error one level above your caller, set it to 1.

For applications that wish to implement a debug layer on top of Log::Agent, the following routine is provided. Note that it is not imported by default, i.e. it needs to be explicitly mentionned at use time, since it is not meant to be used directly under regular usage.

logwrite channel, priority, message

Unconditionally write the message at the given priority on channel. The channel can be one of debug, error or output.

At the application level, one needs to commit once and for all about the logging scheme to be used. This is done thanks to the logconfig() routine which takes the following switches, in alphabetical order:

-caller => [ parameters ]

Request that caller information (relative to the logxxx() call) be part of the log message. The given parameters are handed off to the creation routine of Log::Agent::Tag::Caller and are documented there.

I usually say something like:

 -caller => [ -display => '($sub/$line)', -postfix => 1 ]

which I find informative enough. On occasion, I found myself using more complex sequences. See Log::Agent::Tag::Caller.

-confess => flag

When true, all logdie() calls will be automatically masqueraded as logconfess().

-debug => priority or level

Sets the priority threshold (can be expressed as a string or a number, the string being mapped to a logging level as described above in PRIORITIES AND LEVEL) for logdbg() calls.

Calls tagged with a level less than or equal to the given threshold will pass through, others will return prematurely without logging anything.

-driver => driver_object

This switch defines the driver object to be used, which must be an heir of the Log::Agent::Driver class. See Log::Agent::Driver(3) for a list of the available drivers.

-level => priority or level

Specifies both -debug and -trace levels at the same time, to a common value.

-prefix => name

Defines the application name which will be pre-pended to all messages, followed by ": " (a colon and a space). Using this switch alone will configure the default driver to use that prefix (stripped down to its basename component).

When a driver object is used, the -prefix switch is kept at the Log::Agent level only and is not passed to the driver: it is up to the driver's creation routine to request the -prefix. Having this information in Log::Agent enables the module to die on critical errors with that error prefix, since it cannot rely on the logging driver for that, obviously.

-priority => [ parameters ]

Request that message priority information be part of the log message. The given parameters are handed off to the creation routine of Log::Agent::Tag::Priority and are documented there.

I usually say something like:

        -priority => [ -display => '[$priority]' ]

which will display the whole priority name at the beginning of the messages, e.g. "[warning]" for a logwarn() or "[error]" for logerr(). See Log::Agent::Tag::Priority and Log::Agent::Priorities.

NOTE: Using -priority does not prevent the -duperr flag of the file driver to also add its own hardwired prefixing in front of duplicated error messages. The two options act at a different level.

-tags => [ list of Log::Agent::Tag objects ]

Specifies user-defined tags to be added to each message. The objects given here must inherit from Log::Agent::Tag and conform to its interface. See Log::Agent::Tag for details.

At runtime, well after logconfig() was issued, it may be desirable to add (or remove) a user tag. Use the logtags() routine for this purpose, and iteract directly with the tag list object.

For instance, a web module might wish to tag all the messages with a session ID, information that might not have been available by the time logconfig() was issued.

-trace => priority or level

Same a -debug but applies to logsay(), logwarn(), logerr() and logtrc().

When unspecified, Log::Agent runs at the "notice" level.

Additional routines, not exported by default, are:

logtags

Returns a Log::Agent::Tag_List object, which holds all user-defined tags that are to be added to each log message.

The initial list of tags is normally supplied by the application at logconfig() time, via the -tags argument. To add or remove tags after configuration time, one needs direct access to the tag list, obtained via this routine. See Log::Agent::Tag_List for the operations that can be performed.

KNOWN LIMITATIONS

The following limitations exist in this early version. They might be addressed in future versions if they are perceived as annoying limitatons instead of being just documented ones. :-)

  • A module which calls logdie() may have its die trapped if called from within an eval(), but unfortunately, the value of $@ is unpredictable: it may be prefixed or not depending on the driver used. This is harder to fix as one might think of at first glance.

  • Some drivers lack customization and hardwire a few things that come from my personal taste, like the prefixing done when duperr is set in Log::Agent::Driver::File, or the fact that the debug and stderr channels are merged as one in the Log::Agent::Driver::Default driver.

  • When using logcroak() or logconfess(), the place where the call was made can still be visible when -caller is used, since the addition of the caller information to the message is done before calling the logging driver. Is this a problem?

AUTHOR

Log::Agent was originally authored by Raphael Manfredi <Raphael_Manfredi@pobox.com> and is currently maintained by Mark Rogaski <mrogaski@cpan.org>.

LICENSE

Copyright (c) 1999-2000 Raphael Manfredi.

Copyright (c) 2002-2003, 2005, 2013 Mark Rogaski; all rights reserved.

This module is free software. You can redistribute it and/or modify it under the terms of the Artistic License 2.0.

This program is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of merchantability or fitness for a particular purpose.

SEE ALSO

Log::Agent::Driver(3), Carp(3).