#!perl
use Config;
use File::Basename qw(&basename &dirname);
use Cwd;
# List explicitly here the variables you want Configure to
# generate. Metaconfig only looks for shell variables, so you
# have to mention them as if they were shell variables, not
# %Config entries. Thus you write
# $startperl
# to ensure Configure will look for $Config{startperl}.
# This forces PL files to create target in same directory as PL file.
# This is so that make depend always knows where to find PL derivatives.
$origdir = cwd;
chdir dirname($0);
$file = basename($0, '.PL');
$file .= '.com' if $^O eq 'VMS';
open OUT,">$file" or die "Can't create $file: $!";
print "Extracting $file (with variable substitutions)\n";
# In this section, perl variables will be expanded during extraction.
# You can use $Config{...} to use Configure variables.
print OUT <<"!GROK!THIS!";
$Config{startperl}
eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}'
if \$running_under_some_shell;
!GROK!THIS!
# In the following, perl variables are not expanded during extraction.
print OUT <<'!NO!SUBS!';
# pod2man -- Convert POD data to formatted *roff input.
#
# Copyright 1999, 2000, 2001, 2004, 2006, 2008, 2010
# Russ Allbery <rra@stanford.edu>
#
# This program is free software; you may redistribute it and/or modify it
# under the same terms as Perl itself.
require 5.004;
use Getopt::Long qw(GetOptions);
use Pod::Man ();
use Pod::Usage qw(pod2usage);
use strict;
# Insert -- into @ARGV before any single dash argument to hide it from
# Getopt::Long; we want to interpret it as meaning stdin.
my $stdin;
@ARGV = map { $_ eq '-' && !$stdin++ ? ('--', $_) : $_ } @ARGV;
# Parse our options, trying to retain backward compatibility with pod2man but
# allowing short forms as well. --lax is currently ignored.
my %options;
$options{errors} = 'pod';
Getopt::Long::config ('bundling_override');
GetOptions (\%options, 'center|c=s', 'date|d=s', 'fixed=s', 'fixedbold=s',
'fixeditalic=s', 'fixedbolditalic=s', 'help|h', 'lax|l',
'name|n=s', 'official|o', 'quotes|q=s', 'release|r:s',
'section|s=s', 'stderr', 'verbose|v', 'utf8|u') or exit 1;
pod2usage (0) if $options{help};
# Official sets --center, but don't override things explicitly set.
if ($options{official} && !defined $options{center}) {
$options{center} = 'Perl Programmers Reference Guide';
}
# Verbose is only our flag, not a Pod::Man flag.
my $verbose = $options{verbose};
delete $options{verbose};
# This isn't a valid Pod::Man option and is only accepted for backward
# compatibility.
delete $options{lax};
# Initialize and run the formatter, pulling a pair of input and output off at
# a time.
my $parser = Pod::Man->new (%options);
my @files;
do {
@files = splice (@ARGV, 0, 2);
print " $files[1]\n" if $verbose;
$parser->parse_from_file (@files);
} while (@ARGV);
__END__
=head1 NAME
pod2man - Convert POD data to formatted *roff input
=for stopwords
en em --stderr stderr --utf8 UTF-8 overdo markup MT-LEVEL Allbery Solaris
URL troff troff-specific formatters uppercased Christiansen
=head1 SYNOPSIS
pod2man [B<--center>=I<string>] [B<--date>=I<string>]
[B<--fixed>=I<font>] [B<--fixedbold>=I<font>] [B<--fixeditalic>=I<font>]
[B<--fixedbolditalic>=I<font>] [B<--name>=I<name>] [B<--official>]
[B<--quotes>=I<quotes>] [B<--release>[=I<version>]]
[B<--section>=I<manext>] [B<--stderr>] [B<--utf8>] [B<--verbose>]
[I<input> [I<output>] ...]
pod2man B<--help>
=head1 DESCRIPTION
B<pod2man> is a front-end for Pod::Man, using it to generate *roff input
from POD source. The resulting *roff code is suitable for display on a
terminal using nroff(1), normally via man(1), or printing using troff(1).
I<input> is the file to read for POD source (the POD can be embedded in
code). If I<input> isn't given, it defaults to C<STDIN>. I<output>, if
given, is the file to which to write the formatted output. If I<output>
isn't given, the formatted output is written to C<STDOUT>. Several POD
files can be processed in the same B<pod2man> invocation (saving module
load and compile times) by providing multiple pairs of I<input> and
I<output> files on the command line.
B<--section>, B<--release>, B<--center>, B<--date>, and B<--official> can
be used to set the headers and footers to use; if not given, Pod::Man will
assume various defaults. See below or L<Pod::Man> for details.
B<pod2man> assumes that your *roff formatters have a fixed-width font
named C<CW>. If yours is called something else (like C<CR>), use
B<--fixed> to specify it. This generally only matters for troff output
for printing. Similarly, you can set the fonts used for bold, italic, and
bold italic fixed-width output.
Besides the obvious pod conversions, Pod::Man, and therefore pod2man also
takes care of formatting func(), func(n), and simple variable references
like $foo or @bar so you don't have to use code escapes for them; complex
expressions like C<$fred{'stuff'}> will still need to be escaped, though.
It also translates dashes that aren't used as hyphens into en dashes, makes
long dashes--like this--into proper em dashes, fixes "paired quotes," and
takes care of several other troff-specific tweaks. See L<Pod::Man> for
complete information.
=head1 OPTIONS
=over 4
=item B<-c> I<string>, B<--center>=I<string>
Sets the centered page header to I<string>. The default is "User
Contributed Perl Documentation", but also see B<--official> below.
=item B<-d> I<string>, B<--date>=I<string>
Set the left-hand footer string to this value. By default, the modification
date of the input file will be used, or the current date if input comes from
C<STDIN>.
=item B<--fixed>=I<font>
The fixed-width font to use for verbatim text and code. Defaults to
C<CW>. Some systems may want C<CR> instead. Only matters for troff(1)
output.
=item B<--fixedbold>=I<font>
Bold version of the fixed-width font. Defaults to C<CB>. Only matters
for troff(1) output.
=item B<--fixeditalic>=I<font>
Italic version of the fixed-width font (actually, something of a misnomer,
since most fixed-width fonts only have an oblique version, not an italic
version). Defaults to C<CI>. Only matters for troff(1) output.
=item B<--fixedbolditalic>=I<font>
Bold italic (probably actually oblique) version of the fixed-width font.
Pod::Man doesn't assume you have this, and defaults to C<CB>. Some
systems (such as Solaris) have this font available as C<CX>. Only matters
for troff(1) output.
=item B<-h>, B<--help>
Print out usage information.
=item B<-l>, B<--lax>
No longer used. B<pod2man> used to check its input for validity as a
manual page, but this should now be done by L<podchecker(1)> instead.
Accepted for backward compatibility; this option no longer does anything.
=item B<-n> I<name>, B<--name>=I<name>
Set the name of the manual page to I<name>. Without this option, the manual
name is set to the uppercased base name of the file being converted unless
the manual section is 3, in which case the path is parsed to see if it is a
Perl module path. If it is, a path like C<.../lib/Pod/Man.pm> is converted
into a name like C<Pod::Man>. This option, if given, overrides any
automatic determination of the name.
Note that this option is probably not useful when converting multiple POD
files at once. The convention for Unix man pages for commands is for the
man page title to be in all-uppercase even if the command isn't.
=item B<-o>, B<--official>
Set the default header to indicate that this page is part of the standard
Perl release, if B<--center> is not also given.
=item B<-q> I<quotes>, B<--quotes>=I<quotes>
Sets the quote marks used to surround CE<lt>> text to I<quotes>. If
I<quotes> is a single character, it is used as both the left and right
quote; if I<quotes> is two characters, the first character is used as the
left quote and the second as the right quoted; and if I<quotes> is four
characters, the first two are used as the left quote and the second two as
the right quote.
I<quotes> may also be set to the special value C<none>, in which case no
quote marks are added around CE<lt>> text (but the font is still changed for
troff output).
=item B<-r>, B<--release>
Set the centered footer. By default, this is the version of Perl you run
B<pod2man> under. Note that some system an macro sets assume that the
centered footer will be a modification date and will prepend something like
"Last modified: "; if this is the case, you may want to set B<--release> to
the last modified date and B<--date> to the version number.
=item B<-s>, B<--section>
Set the section for the C<.TH> macro. The standard section numbering
convention is to use 1 for user commands, 2 for system calls, 3 for
functions, 4 for devices, 5 for file formats, 6 for games, 7 for
miscellaneous information, and 8 for administrator commands. There is a lot
of variation here, however; some systems (like Solaris) use 4 for file
formats, 5 for miscellaneous information, and 7 for devices. Still others
use 1m instead of 8, or some mix of both. About the only section numbers
that are reliably consistent are 1, 2, and 3.
By default, section 1 will be used unless the file ends in C<.pm>, in
which case section 3 will be selected.
=item B<--stderr>
By default, B<pod2man> puts any errors detected in the POD input in a POD
ERRORS section in the output manual page. If B<--stderr> is given, errors
are sent to standard error instead and the POD ERRORS section is
suppressed.
=item B<-u>, B<--utf8>
By default, B<pod2man> produces the most conservative possible *roff
output to try to ensure that it will work with as many different *roff
implementations as possible. Many *roff implementations cannot handle
non-ASCII characters, so this means all non-ASCII characters are converted
either to a *roff escape sequence that tries to create a properly accented
character (at least for troff output) or to C<X>.
This option says to instead output literal UTF-8 characters. If your
*roff implementation can handle it, this is the best output format to use
and avoids corruption of documents containing non-ASCII characters.
However, be warned that *roff source with literal UTF-8 characters is not
supported by many implementations and may even result in segfaults and
other bad behavior.
Be aware that, when using this option, the input encoding of your POD
source must be properly declared unless it is US-ASCII or Latin-1. POD
input without an C<=encoding> command will be assumed to be in Latin-1,
and if it's actually in UTF-8, the output will be double-encoded. See
L<perlpod(1)> for more information on the C<=encoding> command.
=item B<-v>, B<--verbose>
Print out the name of each output file as it is being generated.
=back
=head1 DIAGNOSTICS
If B<pod2man> fails with errors, see L<Pod::Man> and L<Pod::Simple> for
information about what those errors might mean.
=head1 EXAMPLES
pod2man program > program.1
pod2man SomeModule.pm /usr/perl/man/man3/SomeModule.3
pod2man --section=7 note.pod > note.7
If you would like to print out a lot of man page continuously, you probably
want to set the C and D registers to set contiguous page numbering and
even/odd paging, at least on some versions of man(7).
troff -man -rC1 -rD1 perl.1 perldata.1 perlsyn.1 ...
To get index entries on C<STDERR>, turn on the F register, as in:
troff -man -rF1 perl.1
The indexing merely outputs messages via C<.tm> for each major page,
section, subsection, item, and any C<XE<lt>E<gt>> directives. See
L<Pod::Man> for more details.
=head1 BUGS
Lots of this documentation is duplicated from L<Pod::Man>.
=head1 SEE ALSO
L<Pod::Man>, L<Pod::Simple>, L<man(1)>, L<nroff(1)>, L<perlpod(1)>,
L<podchecker(1)>, L<perlpodstyle(1)>, L<troff(1)>, L<man(7)>
The man page documenting the an macro set may be L<man(5)> instead of
L<man(7)> on your system.
The current version of this script is always available from its web site at
L<http://www.eyrie.org/~eagle/software/podlators/>. It is also part of the
Perl core distribution as of 5.6.0.
=head1 AUTHOR
Russ Allbery <rra@stanford.edu>, based I<very> heavily on the original
B<pod2man> by Larry Wall and Tom Christiansen.
=head1 COPYRIGHT AND LICENSE
Copyright 1999, 2000, 2001, 2004, 2006, 2008, 2010 Russ Allbery
<rra@stanford.edu>.
This program is free software; you may redistribute it and/or modify it
under the same terms as Perl itself.
=cut
!NO!SUBS!
#'# (cperl-mode)
close OUT or die "Can't close $file: $!";
chmod 0755, $file or die "Can't reset permissions for $file: $!\n";
exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';
chdir $origdir;