=head1 NAME
perlrebackslash - Perl Regular Expression Backslash Sequences and Escapes
=head1 DESCRIPTION
The top level documentation about Perl regular expressions
is found in L<perlre>.
This document describes all backslash and escape sequences. After
explaining the role of the backslash, it lists all the sequences that have
a special meaning in Perl regular expressions (in alphabetical order),
then describes each of them.
Most sequences are described in detail in different documents; the primary
purpose of this document is to have a quick reference guide describing all
backslash and escape sequences.
=head2 The backslash
In a regular expression, the backslash can perform one of two tasks:
it either takes away the special meaning of the character following it
(for instance, C<\|> matches a vertical bar, it's not an alternation),
or it is the start of a backslash or escape sequence.
The rules determining what it is are quite simple: if the character
following the backslash is an ASCII punctuation (non-word) character (that is,
anything that is not a letter, digit or underscore), then the backslash just
takes away the special meaning (if any) of the character following it.
If the character following the backslash is an ASCII letter or an ASCII digit,
then the sequence may be special; if so, it's listed below. A few letters have
not been used yet, so escaping them with a backslash doesn't change them to be
special. A future version of Perl may assign a special meaning to them, so if
you have warnings turned on, Perl will issue a warning if you use such a
sequence. [1].
It is however guaranteed that backslash or escape sequences never have a
punctuation character following the backslash, not now, and not in a future
version of Perl 5. So it is safe to put a backslash in front of a non-word
character.
Note that the backslash itself is special; if you want to match a backslash,
you have to escape the backslash with a backslash: C</\\/> matches a single
backslash.
=over 4
=item [1]
There is one exception. If you use an alphanumerical character as the
delimiter of your pattern (which you probably shouldn't do for readability
reasons), you will have to escape the delimiter if you want to match
it. Perl won't warn then. See also L<perlop/Gory details of parsing
quoted constructs>.
=back
=head2 All the sequences and escapes
Those not usable within a bracketed character class (like C<[\da-z]>) are marked
as C<Not in [].>
\000 Octal escape sequence. See also \o{}.
\1 Absolute backreference. Not in [].
\a Alarm or bell.
\A Beginning of string. Not in [].
\b Word/non-word boundary. (Backspace in []).
\B Not a word/non-word boundary. Not in [].
\cX Control-X
\C Single octet, even under UTF-8. Not in [].
\d Character class for digits.
\D Character class for non-digits.
\e Escape character.
\E Turn off \Q, \L and \U processing. Not in [].
\f Form feed.
\g{}, \g1 Named, absolute or relative backreference. Not in []
\G Pos assertion. Not in [].
\h Character class for horizontal whitespace.
\H Character class for non horizontal whitespace.
\k{}, \k<>, \k'' Named backreference. Not in [].
\K Keep the stuff left of \K. Not in [].
\l Lowercase next character. Not in [].
\L Lowercase till \E. Not in [].
\n (Logical) newline character.
\N Any character but newline. Experimental. Not in [].
\N{} Named or numbered (Unicode) character or sequence.
\o{} Octal escape sequence.
\p{}, \pP Character with the given Unicode property.
\P{}, \PP Character without the given Unicode property.
\Q Quotemeta till \E. Not in [].
\r Return character.
\R Generic new line. Not in [].
\s Character class for whitespace.
\S Character class for non whitespace.
\t Tab character.
\u Titlecase next character. Not in [].
\U Uppercase till \E. Not in [].
\v Character class for vertical whitespace.
\V Character class for non vertical whitespace.
\w Character class for word characters.
\W Character class for non-word characters.
\x{}, \x00 Hexadecimal escape sequence.
\X Unicode "extended grapheme cluster". Not in [].
\z End of string. Not in [].
\Z End of string. Not in [].
=head2 Character Escapes
=head3 Fixed characters
A handful of characters have a dedicated I<character escape>. The following
table shows them, along with their ASCII code points (in decimal and hex),
their ASCII name, the control escape on ASCII platforms and a short
description. (For EBCDIC platforms, see L<perlebcdic/OPERATOR DIFFERENCES>.)
Seq. Code Point ASCII Cntrl Description.
Dec Hex
\a 7 07 BEL \cG alarm or bell
\b 8 08 BS \cH backspace [1]
\e 27 1B ESC \c[ escape character
\f 12 0C FF \cL form feed
\n 10 0A LF \cJ line feed [2]
\r 13 0D CR \cM carriage return
\t 9 09 TAB \cI tab
=over 4
=item [1]
C<\b> is the backspace character only inside a character class. Outside a
character class, C<\b> is a word/non-word boundary.
=item [2]
C<\n> matches a logical newline. Perl will convert between C<\n> and your
OS's native newline character when reading from or writing to text files.
=back
=head4 Example
$str =~ /\t/; # Matches if $str contains a (horizontal) tab.
=head3 Control characters
C<\c> is used to denote a control character; the character following C<\c>
determines the value of the construct. For example the value of C<\cA> is
C<chr(1)>, and the value of C<\cb> is C<chr(2)>, etc.
The gory details are in L<perlop/"Regexp Quote-Like Operators">. A complete
list of what C<chr(1)>, etc. means for ASCII and EBCDIC platforms is in
L<perlebcdic/OPERATOR DIFFERENCES>.
Note that C<\c\> alone at the end of a regular expression (or doubled-quoted
string) is not valid. The backslash must be followed by another character.
That is, C<\c\I<X>> means C<chr(28) . 'I<X>'> for all characters I<X>.
To write platform-independent code, you must use C<\N{I<NAME>}> instead, like
C<\N{ESCAPE}> or C<\N{U+001B}>, see L<charnames>.
Mnemonic: I<c>ontrol character.
=head4 Example
$str =~ /\cK/; # Matches if $str contains a vertical tab (control-K).
=head3 Named or numbered characters and character sequences
Unicode characters have a Unicode name and numeric ordinal value. Use the
C<\N{}> construct to specify a character by either of these values.
Certain sequences of characters also have names.
To specify by name, the name of the character or character sequence goes
between the curly braces. In this case, you have to C<use charnames> to
load the Unicode names of the characters, otherwise Perl will complain.
To specify a character by Unicode code point, use the form
C<\N{U+I<wide hex character>}>, where I<wide hex character> is a number in
hexadecimal that gives the ordinal number that Unicode has assigned to the
desired character. It is customary (but not required) to use leading zeros to
pad the number to 4 digits. Thus C<\N{U+0041}> means
C<LATIN CAPITAL LETTER A>, and you will rarely see it written without the two
leading zeros. C<\N{U+0041}> means "A" even on EBCDIC machines (where the
ordinal value of "A" is not 0x41).
It is even possible to give your own names to characters and character
sequences. For details, see L<charnames>.
(There is an expanded internal form that you may see in debug output:
C<\N{U+I<wide hex character>.I<wide hex character>...}>.
The C<...> means any number of these I<wide hex character>s separated by dots.
This represents the sequence formed by the characters. This is an internal
form only, subject to change, and you should not try to use it yourself.)
Mnemonic: I<N>amed character.
Note that a character or character sequence that is expressed as a named
or numbered character is considered as a character without special
meaning by the regex engine, and will match "as is".
=head4 Example
use charnames ':full'; # Loads the Unicode names.
$str =~ /\N{THAI CHARACTER SO SO}/; # Matches the Thai SO SO character
use charnames 'Cyrillic'; # Loads Cyrillic names.
$str =~ /\N{ZHE}\N{KA}/; # Match "ZHE" followed by "KA".
=head3 Octal escapes
There are two forms of octal escapes. Each is used to specify a character by
its ordinal, specified in octal notation.
One form, available starting in Perl 5.14 looks like C<\o{...}>, where the dots
represent one or more octal digits. It can be used for any Unicode character.
It was introduced to avoid the potential problems with the other form,
available in all Perls. That form consists of a backslash followed by three
octal digits. One problem with this form is that it can look exactly like an
old-style backreference (see
L</Disambiguation rules between old-style octal escapes and backreferences>
below.) You can avoid this by making the first of the three digits always a
zero, but that makes \077 the largest ordinal unambiguously specifiable by this
form.
In some contexts, a backslash followed by two or even one octal digits may be
interpreted as an octal escape, sometimes with a warning, and because of some
bugs, sometimes with surprising results. Also, if you are creating a regex
out of smaller snippets concatentated together, and you use fewer than three
digits, the beginning of one snippet may be interpreted as adding digits to the
ending of the snippet before it. See L</Absolute referencing> for more
discussion and examples of the snippet problem.
Note that a character that is expressed as an octal escape is considered
as a character without special meaning by the regex engine, and will match
"as is".
To summarize, the C<\o{}> form is always safe to use, and the other form is
safe to use for ordinals up through \077 when you use exactly three digits to
specify them.
Mnemonic: I<0>ctal or I<o>ctal.
=head4 Examples (assuming an ASCII platform)
$str = "Perl";
$str =~ /\o{120}/; # Match, "\120" is "P".
$str =~ /\120/; # Same.
$str =~ /\o{120}+/; # Match, "\120" is "P", it's repeated at least once
$str =~ /\120+/; # Same.
$str =~ /P\053/; # No match, "\053" is "+" and taken literally.
/\o{23073}/ # Black foreground, white background smiling face.
/\o{4801234567}/ # Raises a warning, and yields chr(4)
=head4 Disambiguation rules between old-style octal escapes and backreferences
Octal escapes of the C<\000> form outside of bracketed character classes
potentially clash with old-style backreferences. (see L</Absolute referencing>
below). They both consist of a backslash followed by numbers. So Perl has to
use heuristics to determine whether it is a backreference or an octal escape.
Perl uses the following rules to disambiguate:
=over 4
=item 1
If the backslash is followed by a single digit, it's a backreference.
=item 2
If the first digit following the backslash is a 0, it's an octal escape.
=item 3
If the number following the backslash is N (in decimal), and Perl already has
seen N capture groups, Perl will consider this to be a backreference.
Otherwise, it will consider it to be an octal escape. Note that if N has more
than three digits, Perl only takes the first three for the octal escape;
the rest are matched as is.
my $pat = "(" x 999;
$pat .= "a";
$pat .= ")" x 999;
/^($pat)\1000$/; # Matches 'aa'; there are 1000 capture groups.
/^$pat\1000$/; # Matches 'a@0'; there are 999 capture groups
# and \1000 is seen as \100 (a '@') and a '0'
=back
You can the force a backreference interpretation always by using the C<\g{...}>
form. You can the force an octal interpretation always by using the C<\o{...}>
form, or for numbers up through \077 (= 63 decimal), by using three digits,
beginning with a "0".
=head3 Hexadecimal escapes
Like octal escapes, there are two forms of hexadecimal escapes, but both start
with the same thing, C<\x>. This is followed by either exactly two hexadecimal
digits forming a number, or a hexadecimal number of arbitrary length surrounded
by curly braces. The hexadecimal number is the code point of the character you
want to express.
Note that a character that is expressed as one of these escapes is considered
as a character without special meaning by the regex engine, and will match
"as is".
Mnemonic: heI<x>adecimal.
=head4 Examples (assuming an ASCII platform)
$str = "Perl";
$str =~ /\x50/; # Match, "\x50" is "P".
$str =~ /\x50+/; # Match, "\x50" is "P", it is repeated at least once
$str =~ /P\x2B/; # No match, "\x2B" is "+" and taken literally.
/\x{2603}\x{2602}/ # Snowman with an umbrella.
# The Unicode character 2603 is a snowman,
# the Unicode character 2602 is an umbrella.
/\x{263B}/ # Black smiling face.
/\x{263b}/ # Same, the hex digits A - F are case insensitive.
=head2 Modifiers
A number of backslash sequences have to do with changing the character,
or characters following them. C<\l> will lowercase the character following
it, while C<\u> will uppercase (or, more accurately, titlecase) the
character following it. (They perform similar functionality as the
functions C<lcfirst> and C<ucfirst>).
To uppercase or lowercase several characters, one might want to use
C<\L> or C<\U>, which will lowercase/uppercase all characters following
them, until either the end of the pattern, or the next occurrence of
C<\E>, whatever comes first. They perform similar functionality as the
functions C<lc> and C<uc> do.
C<\Q> is used to escape all characters following, up to the next C<\E>
or the end of the pattern. C<\Q> adds a backslash to any character that
isn't a letter, digit or underscore. This will ensure that any character
between C<\Q> and C<\E> is matched literally, and will not be interpreted
by the regexp engine.
Mnemonic: I<L>owercase, I<U>ppercase, I<Q>uotemeta, I<E>nd.
=head4 Examples
$sid = "sid";
$greg = "GrEg";
$miranda = "(Miranda)";
$str =~ /\u$sid/; # Matches 'Sid'
$str =~ /\L$greg/; # Matches 'greg'
$str =~ /\Q$miranda\E/; # Matches '(Miranda)', as if the pattern
# had been written as /\(Miranda\)/
=head2 Character classes
Perl regular expressions have a large range of character classes. Some of
the character classes are written as a backslash sequence. We will briefly
discuss those here; full details of character classes can be found in
L<perlrecharclass>.
C<\w> is a character class that matches any single I<word> character
(letters, digits, Unicode marks, and connector punctuation (like the
underscore)). C<\d> is a character class that matches any decimal
digit, while the character class C<\s> matches any whitespace character.
New in perl 5.10.0 are the classes C<\h> and C<\v> which match horizontal
and vertical whitespace characters.
The uppercase variants (C<\W>, C<\D>, C<\S>, C<\H>, and C<\V>) are
character classes that match, respectively, any character that isn't a
word character, digit, whitespace, horizontal whitespace, or vertical
whitespace.
Mnemonics: I<w>ord, I<d>igit, I<s>pace, I<h>orizontal, I<v>ertical.
=head3 Unicode classes
C<\pP> (where C<P> is a single letter) and C<\p{Property}> are used to
match a character that matches the given Unicode property; properties
include things like "letter", or "thai character". Capitalizing the
sequence to C<\PP> and C<\P{Property}> make the sequence match a character
that doesn't match the given Unicode property. For more details, see
L<perlrecharclass/Backslash sequences> and
L<perlunicode/Unicode Character Properties>.
Mnemonic: I<p>roperty.
=head2 Referencing
If capturing parenthesis are used in a regular expression, we can refer
to the part of the source string that was matched, and match exactly the
same thing. There are three ways of referring to such I<backreference>:
absolutely, relatively, and by name.
=for later add link to perlrecapture
=head3 Absolute referencing
Either C<\gI<N>> (starting in Perl 5.10.0), or C<\I<N>> (old-style) where I<N>
is a positive (unsigned) decimal number of any length is an absolute reference
to a capturing group.
I<N> refers to the Nth set of parentheses, so C<\gI<N>> refers to whatever has
been matched by that set of parentheses. Thus C<\g1> refers to the first
capture group in the regex.
The C<\gI<N>> form can be equivalently written as C<\g{I<N>}>
which avoids ambiguity when building a regex by concatenating shorter
strings. Otherwise if you had a regex C<qr/$a$b/>, and C<$a> contained
C<"\g1">, and C<$b> contained C<"37">, you would get C</\g137/> which is
probably not what you intended.
In the C<\I<N>> form, I<N> must not begin with a "0", and there must be at
least I<N> capturing groups, or else I<N> will be considered an octal escape
(but something like C<\18> is the same as C<\0018>, that is the octal escape
C<"\001"> followed by a literal digit C<"8">).
Mnemonic: I<g>roup.
=head4 Examples
/(\w+) \g1/; # Finds a duplicated word, (e.g. "cat cat").
/(\w+) \1/; # Same thing; written old-style
/(.)(.)\g2\g1/; # Match a four letter palindrome (e.g. "ABBA").
=head3 Relative referencing
C<\g-I<N>> (starting in Perl 5.10.0) is used for relative addressing. (It can
be written as C<\g{-I<N>>.) It refers to the I<N>th group before the
C<\g{-I<N>}>.
The big advantage of this form is that it makes it much easier to write
patterns with references that can be interpolated in larger patterns,
even if the larger pattern also contains capture groups.
=head4 Examples
/(A) # Group 1
( # Group 2
(B) # Group 3
\g{-1} # Refers to group 3 (B)
\g{-3} # Refers to group 1 (A)
)
/x; # Matches "ABBA".
my $qr = qr /(.)(.)\g{-2}\g{-1}/; # Matches 'abab', 'cdcd', etc.
/$qr$qr/ # Matches 'ababcdcd'.
=head3 Named referencing
C<\g{I<name>}> (starting in Perl 5.10.0) can be used to back refer to a
named capture group, dispensing completely with having to think about capture
buffer positions.
To be compatible with .Net regular expressions, C<\g{name}> may also be
written as C<\k{name}>, C<< \k<name> >> or C<\k'name'>.
To prevent any ambiguity, I<name> must not start with a digit nor contain a
hyphen.
=head4 Examples
/(?<word>\w+) \g{word}/ # Finds duplicated word, (e.g. "cat cat")
/(?<word>\w+) \k{word}/ # Same.
/(?<word>\w+) \k<word>/ # Same.
/(?<letter1>.)(?<letter2>.)\g{letter2}\g{letter1}/
# Match a four letter palindrome (e.g. "ABBA")
=head2 Assertions
Assertions are conditions that have to be true; they don't actually
match parts of the substring. There are six assertions that are written as
backslash sequences.
=over 4
=item \A
C<\A> only matches at the beginning of the string. If the C</m> modifier
isn't used, then C</\A/> is equivalent to C</^/>. However, if the C</m>
modifier is used, then C</^/> matches internal newlines, but the meaning
of C</\A/> isn't changed by the C</m> modifier. C<\A> matches at the beginning
of the string regardless whether the C</m> modifier is used.
=item \z, \Z
C<\z> and C<\Z> match at the end of the string. If the C</m> modifier isn't
used, then C</\Z/> is equivalent to C</$/>, that is, it matches at the
end of the string, or before the newline at the end of the string. If the
C</m> modifier is used, then C</$/> matches at internal newlines, but the
meaning of C</\Z/> isn't changed by the C</m> modifier. C<\Z> matches at
the end of the string (or just before a trailing newline) regardless whether
the C</m> modifier is used.
C<\z> is just like C<\Z>, except that it will not match before a trailing
newline. C<\z> will only match at the end of the string - regardless of the
modifiers used, and not before a newline.
=item \G
C<\G> is usually only used in combination with the C</g> modifier. If the
C</g> modifier is used (and the match is done in scalar context), Perl will
remember where in the source string the last match ended, and the next time,
it will start the match from where it ended the previous time.
C<\G> matches the point where the previous match ended, or the beginning
of the string if there was no previous match.
=for later add link to perlremodifiers
Mnemonic: I<G>lobal.
=item \b, \B
C<\b> matches at any place between a word and a non-word character; C<\B>
matches at any place between characters where C<\b> doesn't match. C<\b>
and C<\B> assume there's a non-word character before the beginning and after
the end of the source string; so C<\b> will match at the beginning (or end)
of the source string if the source string begins (or ends) with a word
character. Otherwise, C<\B> will match.
Mnemonic: I<b>oundary.
=back
=head4 Examples
"cat" =~ /\Acat/; # Match.
"cat" =~ /cat\Z/; # Match.
"cat\n" =~ /cat\Z/; # Match.
"cat\n" =~ /cat\z/; # No match.
"cat" =~ /\bcat\b/; # Matches.
"cats" =~ /\bcat\b/; # No match.
"cat" =~ /\bcat\B/; # No match.
"cats" =~ /\bcat\B/; # Match.
while ("cat dog" =~ /(\w+)/g) {
print $1; # Prints 'catdog'
}
while ("cat dog" =~ /\G(\w+)/g) {
print $1; # Prints 'cat'
}
=head2 Misc
Here we document the backslash sequences that don't fall in one of the
categories above. They are:
=over 4
=item \C
C<\C> always matches a single octet, even if the source string is encoded
in UTF-8 format, and the character to be matched is a multi-octet character.
C<\C> was introduced in perl 5.6.
Mnemonic: oI<C>tet.
=item \K
This is new in perl 5.10.0. Anything that is matched left of C<\K> is
not included in C<$&> - and will not be replaced if the pattern is
used in a substitution. This will allow you to write C<s/PAT1 \K PAT2/REPL/x>
instead of C<s/(PAT1) PAT2/${1}REPL/x> or C<s/(?<=PAT1) PAT2/REPL/x>.
Mnemonic: I<K>eep.
=item \N
This is a new experimental feature in perl 5.12.0. It matches any character
that is not a newline. It is a short-hand for writing C<[^\n]>, and is
identical to the C<.> metasymbol, except under the C</s> flag, which changes
the meaning of C<.>, but not C<\N>.
Note that C<\N{...}> can mean a
L<named or numbered character
|/Named or numbered characters and character sequences>.
Mnemonic: Complement of I<\n>.
=item \R
X<\R>
C<\R> matches a I<generic newline>, that is, anything that is considered
a newline by Unicode. This includes all characters matched by C<\v>
(vertical whitespace), and the multi character sequence C<"\x0D\x0A">
(carriage return followed by a line feed, aka the network newline, or
the newline used in Windows text files). C<\R> is equivalent to
C<< (?>\x0D\x0A)|\v) >>. Since C<\R> can match a sequence of more than one
character, it cannot be put inside a bracketed character class; C</[\R]/> is an
error; use C<\v> instead. C<\R> was introduced in perl 5.10.0.
Mnemonic: none really. C<\R> was picked because PCRE already uses C<\R>,
and more importantly because Unicode recommends such a regular expression
metacharacter, and suggests C<\R> as the notation.
=item \X
X<\X>
This matches a Unicode I<extended grapheme cluster>.
C<\X> matches quite well what normal (non-Unicode-programmer) usage
would consider a single character. As an example, consider a G with some sort
of diacritic mark, such as an arrow. There is no such single character in
Unicode, but one can be composed by using a G followed by a Unicode "COMBINING
UPWARDS ARROW BELOW", and would be displayed by Unicode-aware software as if it
were a single character.
Mnemonic: eI<X>tended Unicode character.
=back
=head4 Examples
"\x{256}" =~ /^\C\C$/; # Match as chr (256) takes 2 octets in UTF-8.
$str =~ s/foo\Kbar/baz/g; # Change any 'bar' following a 'foo' to 'baz'
$str =~ s/(.)\K\g1//g; # Delete duplicated characters.
"\n" =~ /^\R$/; # Match, \n is a generic newline.
"\r" =~ /^\R$/; # Match, \r is a generic newline.
"\r\n" =~ /^\R$/; # Match, \r\n is a generic newline.
"P\x{0307}" =~ /^\X$/ # \X matches a P with a dot above.
=cut