# PODNAME: Config::Model::models::LCDd::CFontzPacket
# ABSTRACT: Configuration class LCDd::CFontzPacket
=head1 NAME
Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket
=head1 VERSION
version 2.041
=head1 DESCRIPTION
Configuration classes used by L<Config::Model>
generated from LCDd.conf
=head1 Elements
=head2 Brightness
Set the initial brightness I<< Optional. Type integer. upstream_default: '1000'. >>
=head2 Contrast
Set the initial contrast I<< Optional. Type integer. upstream_default: '560'. >>
=head2 Device
Select the output device to use I<< Optional. Type uniline. upstream_default: '/dev/lcd'. >>
=head2 Model
Select the LCD model I<< Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'. >>
=head2 OffBrightness
Set the initial off-brightness
This value is used when the display is normally
switched off in case LCDd is inactive. I<< Optional. Type integer. upstream_default: '0'. >>
=head2 OldFirmware
Very old 633 firmware versions do not support partial screen updates using
'Send Data to LCD' command (31). For those devices it may be necessary to
enable this flag. I<< Optional. Type boolean. upstream_default: 'no'. >>
=head2 Reboot
Reinitialize the LCD's BIOS on driver start. I<< Optional. Type boolean. upstream_default: 'no'. >>
=head2 Size
Override the LCD size known for the selected model. Usually setting this
value should not be necessary.I<< Optional. Type uniline. upstream_default: '20x4'. >>
=head2 Speed
Override the default communication speed known for the selected model.
Default value depends on model I<< Optional. Type enum. choice: '19200', '115200'. >>
=head2 USB
Enable the USB flag if the device is connected to an USB port. For
serial ports leave it disabled. I<< Optional. Type boolean. upstream_default: 'no'. >>
=head1 SEE ALSO
=over
=item *
L<cme>
=back
=cut