# PODNAME: Config::Model::models::LCDd::serialVFD
# ABSTRACT: Configuration class LCDd::serialVFD
=encoding utf8
=head1 NAME
Config::Model::models::LCDd::serialVFD - Configuration class LCDd::serialVFD
=head1 DESCRIPTION
Configuration classes used by L<Config::Model>
generated from LCDd.conf
=head1 Elements
=head2 Brightness
Set the initial brightness
(4 steps 0-250, 251-500, 501-750, 751-1000) I<< Optional. Type integer. upstream_default: '1000'. >>
=head2 Device
Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1. I<< Optional. Type uniline. default: '/dev/ttyS1'. >>
=head2 ISO_8859_1
enable ISO 8859 1 compatibility I<< Optional. Type boolean. upstream_default: 'yes'. >>
=head2 OffBrightness
Set the initial off-brightness
This value is used when the display is normally
switched off in case LCDd is inactive
(4 steps 0-250, 251-500, 501-750, 751-1000) I<< Optional. Type integer. upstream_default: '0'. >>
=head2 Port
Number of Custom-Characters. default is display type dependent
Custom-Characters=0
Portaddress where the LPT is. Used in parallel mode only. Usual values are
0x278, 0x378 and 0x3BC. I<< Optional. Type uniline. default: '0x378'. >>
=head2 PortWait
Set parallel port timing delay (us). Used in parallel mode only. I<< Optional. Type integer. upstream_default: '2'. >>
=head2 Size
Specifies the size of the VFD. I<< Optional. Type uniline. default: '20x2'. >>
=head2 Speed
set the serial port speed I<< Optional. Type enum. choice: '1200', '2400', '9600', '19200', '115200'. upstream_default: '9600'. >>
=head2 Type
Specifies the displaytype.
0 NEC (FIPC8367 based) VFDs.
1 KD Rev 2.1.
2 Noritake VFDs (*).
3 Futaba VFDs
4 IEE S03601-95B
5 IEE S03601-96-080 (*)
6 Futaba NA202SD08FA (allmost IEE compatible)
7 Samsung 20S207DA4 and 20S207DA6
8 Nixdorf BA6x / VT100
(* most should work, not tested yet.) I<< Optional. Type uniline. upstream_default: '0'. >>
=head2 use_parallel
"no" if display connected serial, "yes" if connected parallel.
I.e. serial by default. I<< Optional. Type uniline. upstream_default: 'no'. >>
=head1 SEE ALSO
=over
=item *
L<cme>
=back
=cut