### Class::MakeMethods
# Copyright 2002, 2003 Matthew Simon Cavalletto
# See documentation, license, and other information after _END_.
package Class::MakeMethods;
require 5.00307; # for the UNIVERSAL::isa method.
use strict;
use Carp;
use vars qw( $VERSION );
$VERSION = 1.009;
use vars qw( %CONTEXT %DIAGNOSTICS );
########################################################################
### MODULE IMPORT: import(), _import_version()
########################################################################
sub import {
my $class = shift;
if ( scalar @_ and $_[0] =~ m/^\d/ ) {
$class->_import_version( shift );
}
if ( scalar @_ == 1 and $_[0] eq '-isasubclass' ) {
shift;
my $target_class = ( caller )[0];
no strict;
push @{"$target_class\::ISA"}, $class;
}
$class->make( @_ ) if ( scalar @_ );
}
sub _import_version {
my $class = shift;
my $wanted = shift;
no strict;
my $version = ${ $class.'::VERSION '};
# If passed a version number, ensure that we measure up.
# Based on similar functionality in Exporter.pm
if ( ! $version or $version < $wanted ) {
my $file = "$class.pm";
$file =~ s!::!/!g;
$file = $INC{$file} ? " ($INC{$file})" : '';
_diagnostic('mm_version_fail', $class, $wanted, $version || '(undef)', $file);
}
}
########################################################################
### METHOD GENERATION: make()
########################################################################
sub make {
local $CONTEXT{MakerClass} = shift;
# Find the first class in the caller() stack that's not a subclass of us
local $CONTEXT{TargetClass};
my $i = 0;
do {
$CONTEXT{TargetClass} = ( caller($i ++) )[0];
} while UNIVERSAL::isa($CONTEXT{TargetClass}, __PACKAGE__ );
my @methods;
# For compatibility with 5.004, which fails to splice use's constant @_
my @declarations = @_;
if (@_ % 2) { _diagnostic('make_odd_args', $CONTEXT{MakerClass}); }
while ( scalar @declarations ) {
# The list passed to import should alternate between the names of the
# meta-method to call to generate the methods, and arguments to it.
my ($name, $args) = splice(@declarations, 0, 2);
unless ( defined $name ) {
croak "Undefined name";
}
# Leading dash on the first argument of a pair means it's a
# global/general option to be stored in CONTEXT.
if ( $name =~ s/^\-// ) {
# To prevent difficult-to-predict retroactive behaviour, start by
# flushing any pending methods before letting settings take effect
if ( scalar @methods ) {
_install_methods( $CONTEXT{MakerClass}, @methods );
@methods = ();
}
if ( $name eq 'MakerClass' ) {
# Switch base package for remainder of args
$CONTEXT{MakerClass} = _find_subclass($CONTEXT{MakerClass}, $args);
} else {
$CONTEXT{$name} = $args;
}
next;
}
# Argument normalization
my @args = (
! ref($args) ? split(' ', $args) : # If a string, it is split on spaces.
ref($args) eq 'ARRAY' ? (@$args) : # If an arrayref, use its contents.
( $args ) # If a hashref, it is used directly
);
# If the type argument contains an array of method types, do the first
# now, and put the others back in the queue to be processed subsequently.
if ( ref($name) eq 'ARRAY' ) {
($name, my @name) = @$name;
unshift @declarations, map { $_=>[@args] } @name;
}
# If the type argument contains space characters, use the first word
# as the type, and prepend the remaining items to the argument list.
if ( $name =~ /\s/ ) {
my @items = split ' ', $name;
$name = shift( @items );
unshift @args, @items;
}
# If name contains a colon or double colon, treat the preceeding part
# as the subclass name but only for this one set of methods.
local $CONTEXT{MakerClass} = _find_subclass($CONTEXT{MakerClass}, $1)
if ($name =~ s/^(.*?)\:{1,2}(\w+)$/$2/);
# Meta-method invocation via named_method or direct method call
my @results = (
$CONTEXT{MakerClass}->can('named_method') ?
$CONTEXT{MakerClass}->named_method( $name, @args ) :
$CONTEXT{MakerClass}->can($name) ?
$CONTEXT{MakerClass}->$name( @args ) :
croak "Can't generate $CONTEXT{MakerClass}->$name() methods"
);
# warn "$CONTEXT{MakerClass} $name - ", join(', ', @results) . "\n";
### A method-generator may be implemented in any of the following ways:
# SELF-CONTAINED: It may return nothing, if there are no methods
# to install, or if it has installed the methods itself.
# (We also accept a single false value, for backward compatibility
# with generators that are written as foreach loops, which return ''!)
if ( ! scalar @results or scalar @results == 1 and ! $results[0] ) { }
# ALIAS: It may return a string containing a meta-method type to run
# instead. Put the arguments back in the queue and go through again.
elsif ( scalar @results == 1 and ! ref $results[0]) {
unshift @declarations, $results[0], \@args;
}
# REWRITER: It may return one or more array reference containing a meta-
# method type and arguments which should be created to complete this
# request. Put the arguments back in the queue and go through again.
elsif ( ! grep { ref $_ ne 'ARRAY' } @results ) {
unshift @declarations, ( map { shift(@$_), $_ } @results );
}
# CODE REFS: It may provide a list of name, code pairs to install
elsif ( ! scalar @results % 2 and ! ref $results[0] ) {
push @methods, @results;
}
# GENERATOR OBJECT: It may return an object reference which will construct
# the relevant methods.
elsif ( UNIVERSAL::can( $results[0], 'make_methods' ) ) {
push @methods, ( shift @results )->make_methods(@results, @args);
}
else {
_diagnostic('make_bad_meta', $name, join(', ', map "'$_'", @results));
}
}
_install_methods( $CONTEXT{MakerClass}, @methods );
return;
}
########################################################################
### FUNCTION INSTALLATION: _install_methods()
########################################################################
sub _install_methods {
my ($class, %methods) = @_;
no strict 'refs';
# print STDERR "CLASS: $class\n";
my $package = $CONTEXT{TargetClass};
my ($name, $code);
while (($name, $code) = each %methods) {
# Skip this if the target package already has a function by the given name.
next if ( ! $CONTEXT{ForceInstall} and
defined *{$package. '::'. $name}{CODE} );
if ( ! ref $code ) {
local $SIG{__DIE__};
local $^W;
my $coderef = eval $code;
if ( $@ ) {
_diagnostic('inst_eval_syntax', $name, $@, $code);
} elsif ( ref $coderef ne 'CODE' ) {
_diagnostic('inst_eval_result', $name, $coderef, $code);
}
$code = $coderef;
} elsif ( ref $code ne 'CODE' ) {
_diagnostic('inst_result', $name, $code);
}
# Add the code refence to the target package
# _diagnostic('debug_install', $package, $name, $code);
local $^W = 0 if ( $CONTEXT{ForceInstall} );
*{$package . '::' . $name} = $code;
}
return;
}
########################################################################
### SUBCLASS LOADING: _find_subclass()
########################################################################
# $pckg = _find_subclass( $class, $optional_package_name );
sub _find_subclass {
my $class = shift;
my $package = shift or die "No package for _find_subclass";
$package = $package =~ s/^::// ? $package :
"Class::MakeMethods::$package";
(my $file = $package . '.pm' ) =~ s|::|/|go;
return $package if ( $::INC{ $file } );
no strict 'refs';
return $package if ( @{$package . '::ISA'} );
local $SIG{__DIE__} = '';
eval { require $file };
$::INC{ $package } = $::INC{ $file };
if ( $@ ) { _diagnostic('mm_package_fail', $package, $@) }
return $package
}
########################################################################
### CONTEXT: _context(), %CONTEXT
########################################################################
sub _context {
my $class = shift;
return %CONTEXT if ( ! scalar @_ );
my $key = shift;
return $CONTEXT{$key} if ( ! scalar @_ );
$CONTEXT{$key} = shift;
}
BEGIN {
$CONTEXT{Debug} ||= 0;
}
########################################################################
### DIAGNOSTICS: _diagnostic(), %DIAGNOSTICS
########################################################################
sub _diagnostic {
my $case = shift;
my $message = $DIAGNOSTICS{$case};
$message =~ s/\A\s*\((\w)\)\s*//;
my $severity = $1 || 'I';
if ( $severity eq 'Q' ) {
carp( sprintf( $message, @_ ) ) if ( $CONTEXT{Debug} );
} elsif ( $severity eq 'W' ) {
carp( sprintf( $message, @_ ) ) if ( $^W );
} elsif ( $severity eq 'F' ) {
croak( sprintf( $message, @_ ) )
} else {
confess( sprintf( $message, @_ ) )
}
}
BEGIN { %DIAGNOSTICS = (
### BASE CLASS DIAGNOSTICS
# _diagnostic('debug_install', $package, $name, $code)
debug_install => q|(W) Installing function %s::%s (%s)|,
# _diagnostic('make_odd_args', $CONTEXT{MakerClass})
make_odd_args => q|(F) Odd number of arguments passed to %s method generator|,
# _diagnostic('make_bad_meta', $name, join(', ', map "'$_'", @results)
make_bad_meta => q|(I) Unexpected return value from method constructor %s: %s|,
# _diagnostic('inst_eval_syntax', $name, $@, $code)
inst_eval_syntax => q|(I) Unable to compile generated method %s(): %s| .
qq|\n (There's probably a syntax error in this generated code.)\n%s\n|,
# _diagnostic('inst_eval_result', $name, $coderef, $code)
inst_eval_result => q|(I) Unexpected return value from compilation of %s(): '%s'| .
qq|\n (This generated code should have returned a code ref.)\n%s\n|,
# _diagnostic('inst_result', $name, $code)
inst_result => q|(I) Unable to install code for %s() method: '%s'|,
# _diagnostic('mm_package_fail', $package, $@)
mm_package_fail => q|(F) Unable to dynamically load %s: %s|,
# _diagnostic('mm_version_fail', $class, $wanted, $version || '(undef)
mm_version_fail => q|(F) %s %s required--this is only version %s%s|,
### STANDARD SUBCLASS DIAGNOSTICS
# _diagnostic('make_empty')
make_empty => q|(F) Can't parse meta-method declaration: argument is empty or undefined|,
# _diagnostic('make_noname')
make_noname => q|(F) Can't parse meta-method declaration: missing name attribute.| .
qq|\n (Perhaps a trailing attributes hash has become separated from its name?)|,
# _diagnostic('make_unsupported', $m_name)
make_unsupported => q|(F) Can't parse meta-method declaration: unsupported declaration type '%s'|,
### TEMPLATE SUBCLASS DIAGNOSTICS
# ToDo: Should be moved to the Class::MakeMethods::Template package
debug_declaration => q|(Q) Meta-method declaration parsed: %s|,
debug_make_behave => q|(Q) Building meta-method behavior %s: %s(%s)|,
mmdef_not_interpretable => qq|(I) Not an interpretable meta-method: '%s'| .
qq|\n (Perhaps a meta-method attempted to import from a non-templated meta-method?)|,
make_bad_modifier => q|(F) Can't parse meta-method declaration: unknown option for %s: %s|,
make_bad_behavior => q|(F) Can't make method %s(): template specifies unknown behavior '%s'|,
behavior_mod_unknown => q|(F) Unknown modification to %s behavior: -%s|,
debug_template_builder => qq|(Q) Template interpretation for %s:\n%s|.
qq|\n---------\n%s\n---------\n|,
debug_template => q|(Q) Parsed template '%s': %s|,
debug_eval_builder => q|(Q) Compiling behavior builder '%s':| . qq|\n%s|,
make_behavior_mod => q|(F) Can't apply modifiers (%s) to code behavior %s|,
behavior_eval => q|(I) Class::MakeMethods behavior compilation error: %s| .
qq|\n (There's probably a syntax error in the below code.)\n%s|,
tmpl_unkown => q|(F) Can't interpret meta-method template: unknown template name '%s'|,
tmpl_empty => q|(F) Can't interpret meta-method template: argument is empty or undefined|,
tmpl_unsupported => q|(F) Can't interpret meta-method template: unsupported template type '%s'|,
) }
1;
__END__
=head1 NAME
Class::MakeMethods - Generate common types of methods
=head1 SYNOPSIS
# Generates methods for your object when you "use" it.
package MyObject;
use Class::MakeMethods::Standard::Hash (
'new' => 'new',
'scalar' => 'foo',
'scalar' => 'bar',
);
# The generated methods can be called just like normal ones
my $obj = MyObject->new( foo => "Foozle", bar => "Bozzle" );
print $obj->foo();
$obj->bar("Barbados");
=head1 DESCRIPTION
The Class::MakeMethods framework allows Perl class developers to
quickly define common types of methods. When a module C<use>s
Class::MakeMethods or one of its subclasses, it can select from a
variety of supported method types, and specify a name for each
method desired. The methods are dynamically generated and installed
in the calling package.
Construction of the individual methods is handled by subclasses.
This delegation approach allows for a wide variety of method-generation
techniques to be supported, each by a different subclass. Subclasses
can also be added to provide support for new types of methods.
Over a dozen subclasses are available, including implementations of
a variety of different method-generation techniques. Each subclass
generates several types of methods, with some supporting their own
open-eneded extension syntax, for hundreds of possible combinations
of method types.
=head1 GETTING STARTED
=head2 Motivation
"Make easy things easier."
This module addresses a problem encountered in object-oriented
development wherein numerous methods are defined which differ only
slightly from each other.
A common example is accessor methods for hash-based object attributes,
which allow you to get and set the value $self-E<gt>{'foo'} by
calling a method $self-E<gt>foo().
These methods are generally quite simple, requiring only a couple
of lines of Perl, but in sufficient bulk, they can cut down on the
maintainability of large classes.
Class::MakeMethods allows you to simply declare those methods to
be of a predefined type, and it generates and installs the necessary
methods in your package at compile-time.
=head2 A Contrived Example
Object-oriented Perl code is widespread -- you've probably seen code like the below a million times:
my $obj = MyStruct->new( foo=>"Foozle", bar=>"Bozzle" );
if ( $obj->foo() =~ /foo/i ) {
$obj->bar("Barbados!");
}
print $obj->summary();
(If this doesn't look familiar, take a moment to read L<perlboot>
and you'll soon learn more than's good for you.)
Typically, this involves creating numerous subroutines that follow
a handful of common patterns, like constructor methods and accessor
methods. The classic example is accessor methods for hash-based
object attributes, which allow you to get and set the value
I<self>-E<gt>{I<foo>} by calling a method I<self>-E<gt>I<foo>().
These methods are generally quite simple, requiring only a couple
of lines of Perl, but in sufficient bulk, they can cut down on the
maintainability of large classes.
Here's a possible implementation for the class whose interface is
shown above:
package MyStruct;
sub new {
my $callee = shift;
my $self = bless { @_ }, (ref $callee || $callee);
return $self;
}
sub foo {
my $self = shift;
if ( scalar @_ ) {
$self->{'foo'} = shift();
} else {
$self->{'foo'}
}
}
sub bar {
my $self = shift;
if ( scalar @_ ) {
$self->{'bar'} = shift();
} else {
$self->{'bar'}
}
}
sub summary {
my $self = shift;
join(', ', map { "\u$_: " . $self->$_() } qw( foo bar ) )
}
Note in particular that the foo and bar methods are almost identical,
and that the new method could be used for almost any class; this
is precisely the type of redundancy Class::MakeMethods addresses.
Class::MakeMethods allows you to simply declare those methods to
be of a predefined type, and it generates and installs the necessary
methods in your package at compile-time.
Here's the equivalent declaration for that same basic class:
package MyStruct;
use Class::MakeMethods::Standard::Hash (
'new' => 'new',
'scalar' => 'foo',
'scalar' => 'bar',
);
sub summary {
my $self = shift;
join(', ', map { "\u$_: " . $self->$_() } qw( foo bar ) )
}
This is the basic purpose of Class::MakeMethods: The "boring" pieces
of code have been replaced by succinct declarations, placing the
focus on the "unique" or "custom" pieces.
=head2 Finding the Method Types You Need
Once you've grasped the basic idea -- simplifying repetitive code
by generating and installing methods on demand -- the remaining
complexity basically boils down to figuring out which arguments to
pass to generate the specific methods you want.
Unfortunately, this is not a trivial task, as there are dozens of
different types of methods that can be generated, each with a
variety of options, and several alternative ways to write each
method declaration. You may prefer to start by just finding a few
examples that you can modify to accomplish your immediate needs,
and defer investigating all of the extras until you're ready to
take a closer look.
=head2 Other Documentation
The remainder of this document focuses on points of usage that are
common across all subclasses, and describes how to create your own
subclasses.
If this is your first exposure to Class::MakeMethods, you may want
to skim over the rest of this document, then take a look at the
examples and one or two of the method-generating subclasses to get
a more concrete sense of typical usage, before returning to the
details presented below.
=over 4
=item *
A collection of sample uses is available in
L<Class::MakeMethods::Docs::Examples>.
=item *
Some of the most common object and class methods are available from
L<Class::MakeMethods::Standard::Hash>,
L<Class::MakeMethods::Standard::Global> and
L<Class::MakeMethods::Standard::Universal>.
=item *
If you need a bit more flexibility, see L<Class::MakeMethods::Composite>
for method generators which offer more customization options,
including pre- and post-method callback hooks.
=item *
For the largest collection of methods and options, see
L<Class::MakeMethods::Template>, which uses a system of dynamic
code generation to allow endless variation.
=item *
A listing of available method types from each of the different
subclasses is provided in L<Class::MakeMethods::Docs::Catalog>.
=back
=head1 CLASS ARCHITECTURE
Because there are so many common types of methods one might wish
to generate, the Class::MakeMethods framework provides an extensible
system based on subclasses.
When your code requests a method, the MakeMethods base class performs
some standard argument parsing, delegates the construction of the
actual method to the appropriate subclass, and then installs whatever
method the subclass returns.
=head2 The MakeMethods Base Class
The Class::MakeMethods package defines a superclass for method-generating
modules, and provides a calling convention, on-the-fly subclass
loading, and subroutine installation that will be shared by all
subclasses.
The superclass also lets you generate several different types of
methods in a single call, and will automatically load named subclasses
the first time they're used.
=head2 The Method Generator Subclasses
The type of method that gets created is controlled by the specific
subclass and generator function you request. For example,
C<Class::MakeMethods::Standard::Hash> has a generator function
C<scalar()>, which is responsible for generating simple scalar-accessor
methods for blessed-hash objects.
Each generator function specified is passed the arguments specifying
the method the caller wants, and produces a closure or eval-able
sequence of Perl statements representing the ready-to-install
function.
=head2 Included Subclasses
Because each subclass defines its own set of method types and
customization options, a key step is to find your way to the
appropriate subclasses.
=over 4
=item Standard (See L<Class::MakeMethods::Standard>.)
Generally you will want to begin with the Standard::Hash subclass,
to create constructor and accessor methods for working with
blessed-hash objects (or you might choose the Standard::Array
subclass instead). The Standard::Global subclass provides methods
for class data shared by all objects in a class.
Each Standard method declaration can optionally include a hash of
associated parameters, which allows you to tweak some of the
characteristics of the methods. Subroutines are bound as closures
to a hash of each method's name and parameters. Standard::Hash and
Standard::Array provide object constructor and accessors. The
Standard::Global provides for static data shared by all instances
and subclasses, while the data for Standard::Inheritable methods
trace the inheritance tree to find values, and can be overriden
for any subclass or instance.
=item Composite (See L<Class::MakeMethods::Composite>.)
For additional customization options, check out the Composite
subclasses, which allow you to select from a more varied set of
implementations and which allow you to adjust any specific method
by adding your own code-refs to be run before or after it.
Subroutines are bound as closures to a hash of each method's name
and optional additional data, and to one or more subroutine references
which make up the composite behavior of the method. Composite::Hash
and Composite::Array provide object constructor and accessors. The
Composite::Global provides for static data shared by all instances
and subclasses, while the data for Composite::Inheritable methods
can be overriden for any subclass or instance.
=item Template (See L<Class::MakeMethods::Template>.)
The Template subclasses provide an open-ended structure for objects
that assemble Perl code on the fly into cachable closure-generating
subroutines; if the method you need isn't included, you can extend
existing methods by re-defining just the snippet of code that's
different.
Class::MakeMethods::Template extends MakeMethods with a text
templating system that can assemble Perl code fragments into a
desired subroutine. The code for generated methods is eval'd once
for each type, and then repeatedly bound as closures to method-specific
data for better performance.
Templates for dozens of types of constructor, accessor, and mutator
methods are included, ranging from from the mundane (constructors
and value accessors for hash and array slots) to the esoteric
(inheritable class data and "inside-out" accessors with external
indexes).
=item Basic (See L<Class::MakeMethods::Basic>.)
The Basic subclasses provide stripped down method generators with
no configurable options, for minimal functionality (and minimum
overhead).
Subroutines are bound as closures to the name of each method.
Basic::Hash and Basic::Array provide simple object constructors
and accessors. Basic::Global provides basic global-data accessors.
=item Emulators (See L<Class::MakeMethods::Emulator>.)
In several cases, Class::MakeMethods provides functionality closely
equivalent to that of an existing module, and it is simple to map
the existing module's interface to that of Class::MakeMethods.
Emulators are included for Class::MethodMaker, Class::Accessor::Fast,
Class::Data::Inheritable, Class::Singleton, and Class::Struct, each
of which passes the original module's test suite, usually requiring
only that the name of the module be changed.
=item Extending
Class::MakeMethods can be extended by creating subclasses that
define additional method-generation functions. Callers can then
specify the name of your subclass and generator function in their
C<use Call::MakeMethods ...> statements and your function will be
invoked to produce the required closures. See L</EXTENDING> for
more information.
=back
=head2 Naming Convention for Generated Method Types
Method generation functions in this document are often referred to using the 'I<MakerClass>:I<MethodType>' or 'I<MakerGroup>::I<MakerSubclass>:I<MethodType>' naming conventions. As you will see, these are simply the names of Perl packages and the names of functions that are contained in those packages.
The included subclasses are grouped into several major groups, so the names used by the included subclasses and method types reflect three axes of variation, "I<Group>::I<Subclass>:I<Type>":
=over 4
=item Maker Group
Each group shares a similar style of technical implementation and level of complexity. For example, the C<Standard::*> packages are all simple, while the C<Composite::*> packages all support pre- and post-conditions.
(For a listing of the four main groups of included subclasses, see L<"/Included Subclasses">.)
=item Maker Subclass
Each subclass generates methods for a similar level of scoping or underlying object type. For example, the C<*::Hash> packages all make methods for objects based on blessed hashes, while the C<*::Global> packages make methods that access class-wide data that will be shared between all objects in a class.
=item Method Type
Each method type produces a similar type of constructor or accessor. For examples, the C<*:new> methods are all constructors, while the C<::scalar> methods are all accessors that allow you to get and set a single scalar value.
=back
Bearing that in mind, you should be able to guess the intent of many of the method types based on their names alone; when you see "Standard::Hash:scalar" you can read it as "a type of method to access a I<scalar> value stored in a I<hash>-based object, with a I<standard> implementation style" and know that it's going to call the scalar() function in the Class::MakeMethods::Standard::Hash package to generate the requested method.
=head1 USAGE
The supported method types, and the kinds of arguments they expect, vary from subclass to subclass; see the documentation of each subclass for details.
However, the features described below are applicable to all subclasses.
=head2 Invocation
Methods are dynamically generated and installed into the calling
package when you C<use Class::MakeMethods (...)> or one of its
subclasses, or if you later call C<Class::MakeMethods-E<gt>make(...)>.
The arguments to C<use> or C<make> should be pairs of a generator
type name and an associated array of method-name arguments to pass to
the generator.
=over 4
=item *
use Class::MakeMethods::I<MakerClass> (
'I<MethodType>' => [ I<Arguments> ], I<...>
);
=item *
Class::MakeMethods::I<MakerClass>->make (
'I<MethodType>' => [ I<Arguments> ], I<...>
);
=back
You may select a specific subclass of Class::MakeMethods for
a single generator-type/argument pair by prefixing the type name
with a subclass name and a colon.
=over 4
=item *
use Class::MakeMethods (
'I<MakerClass>:I<MethodType>' => [ I<Arguments> ], I<...>
);
=item *
Class::MakeMethods->make (
'I<MakerClass>:I<MethodType>' => [ I<Arguments> ], I<...>
);
=back
The difference between C<use> and C<make> is primarily one of precedence; the C<use> keyword acts as a BEGIN block, and is thus evaluated before C<make> would be. (See L</"About Precedence"> for additional discussion of this issue.)
=head2 Alternative Invocation
If you want methods to be declared at run-time when a previously-unknown
method is invoked, see L<Class::MakeMethods::Autoload>.
=over 4
=item *
use Class::MakeMethods::Autoload 'I<MakerClass>:I<MethodType>';
=back
If you are using Perl version 5.6 or later, see
L<Class::MakeMethods::Attribute> for an additional declaration
syntax for generated methods.
=over 4
=item *
use Class::MakeMethods::Attribute 'I<MakerClass>';
sub I<name> :MakeMethod('I<MethodType>' => I<Arguments>);
=back
=head2 Mixing Method Types
A single calling class can combine generated methods from different MakeMethods subclasses. In general, the only mixing that's problematic is combinations of methods which depend on different underlying object types, like using *::Hash and *::Array methods together -- the methods will be generated, but some of them are guaranteed to fail when called, depending on whether your object happens to be a blessed hashref or arrayref.
For example, it's common to mix and match various *::Hash methods, with a scattering of Global or Inheritable methods:
use Class::MakeMethods (
'Basic::Hash:scalar' => 'foo',
'Composite::Hash:scalar' => [ 'bar' => { post_rules => [] } ],
'Standard::Global:scalar' => 'our_shared_baz'
);
=head2 Argument Normalization
The following expansion rules are applied to argument pairs to
enable the use of simple strings instead of arrays of arguments.
=over 4
=item *
Each type can be followed by a single meta-method definition, or by a
reference to an array of them.
=item *
If the argument is provided as a string containing spaces, it is
split and each word is treated as a separate argument.
=item *
It the meta-method type string contains spaces, it is split and
only the first word is used as the type, while the remaining words
are placed at the front of the argument list.
=back
For example, the following statements are equivalent ways of
declaring a pair of Basic::Hash scalar methods named 'foo' and 'bar':
use Class::MakeMethods::Basic::Hash (
'scalar' => [ 'foo', 'bar' ],
);
use Class::MakeMethods::Basic::Hash (
'scalar' => 'foo',
'scalar' => 'bar',
);
use Class::MakeMethods::Basic::Hash (
'scalar' => 'foo bar',
);
use Class::MakeMethods::Basic::Hash (
'scalar foo' => 'bar',
);
(The last of these is clearly a bit peculiar and potentially misleading if used as shown, but it enables advanced subclasses to provide convenient formatting for declarations with defaults or modifiers, such as C<'Template::Hash:scalar --private' =E<gt> 'foo'>, discussed elsewhere.)
=head2 Global Parameters
Global parameters may be specified as an argument pair with a leading hyphen. (This distinguishes them from type names, which must be valid Perl subroutine names, and thus will never begin with a hyphen.)
use Class::MakeMethods::I<MakerClass> (
'-I<Param>' => I<ParamValue>,
'I<MethodType>' => [ I<Arguments> ], I<...>
);
Parameter settings apply to all subsequent method declarations within a single C<use> or C<make> call.
The below parameters allow you to control generation and installation of the requested methods. (Some subclasses may support additional parameters; see their documentation for details.)
=over 4
=item -TargetClass
By default, the methods are installed in the first package in the caller() stack that is not a Class::MakeMethods subclass; this is generally the package in which your use or make statement was issued. To override this you can pass C<-TargetClass =E<gt> I<package>> as initial arguments to C<use> or C<make>.
This allows you to construct or modify classes "from the outside":
package main;
use Class::MakeMethods::Basic::Hash(
-TargetClass => 'MyWidget',
'new' => ['create'],
'scalar' => ['foo', 'bar'],
);
$o = MyWidget->new( foo => 'Foozle' );
print $o->foo();
=item -MakerClass
By default, meta-methods are looked up in the package you called
use or make on.
You can override this by passing the C<-MakerClass> flag, which
allows you to switch packages for the remainder of the meta-method
types and arguments.
use Class::MakeMethods (
'-MakerClass'=>'I<MakerClass>',
'I<MethodType>' => [ I<Arguments> ]
);
When specifying the MakerClass, you may provide either the trailing
part name of a subclass inside of the C<Class::MakeMethods::>
namespace, or a full package name prefixed by C<::>.
For example, the following four statements are equivalent ways of
declaring a Basic::Hash scalar method named 'foo':
use Class::MakeMethods::Basic::Hash (
'scalar' => [ 'foo' ]
);
use Class::MakeMethods (
'Basic::Hash:scalar' => [ 'foo' ]
);
use Class::MakeMethods (
'-MakerClass'=>'Basic::Hash',
'scalar' => [ 'foo' ]
);
use Class::MakeMethods (
'-MakerClass'=>'::Class::MakeMethods::Basic::Hash',
'scalar' => [ 'foo' ]
);
=item -ForceInstall
By default, Class::MakeMethods will not install generated methods over any pre-existing methods in the target class. To override this you can pass C<-ForceInstall =E<gt> 1> as initial arguments to C<use> or C<make>.
Note that the C<use> keyword acts as a BEGIN block, so a C<use> at the top of a file will be executed before any subroutine declarations later in the file have been seen. (See L</"About Precedence"> for additional discussion of this issue.)
=back
=head2 About Precedence
Rather than passing the method declaration arguments when you C<use> one of these packages, you may instead pass them to a subsequent call to the class method C<make>.
The difference between C<use> and C<make> is primarily one of precedence; the C<use> keyword acts as a BEGIN block, and is thus evaluated before C<make> would be. In particular, a C<use> at the top of a file will be executed before any subroutine declarations later in the file have been seen, whereas a C<make> at the same point in the file will not.
By default, Class::MakeMethods will not install generated methods over any pre-existing methods in the target class. To override this you can pass C<-ForceInstall =E<gt> 1> as initial arguments to C<use> or C<make>.
If the same method is declared multiple times, earlier calls to
C<use> or C<make()> win over later ones, but within each call,
later declarations superceed earlier ones.
Here are some examples of the results of these precedence rules:
# 1 - use, before
use Class::MakeMethods::Standard::Hash (
'scalar'=>['baz'] # baz() not seen yet, so we generate, install
);
sub baz { 1 } # Subsequent declaration overwrites it, with warning
# 2 - use, after
sub foo { 1 }
use Class::MakeMethods::Standard::Hash (
'scalar'=>['foo'] # foo() is already declared, so has no effect
);
# 3 - use, after, Force
sub bar { 1 }
use Class::MakeMethods::Standard::Hash (
-ForceInstall => 1, # Set flag for following methods...
'scalar' => ['bar'] # ... now overwrites pre-existing bar()
);
# 4 - make, before
Class::MakeMethods::Standard::Hash->make(
'scalar'=>['blip'] # blip() is already declared, so has no effect
);
sub blip { 1 } # Although lower than make(), this "happens" first
# 5 - make, after, Force
sub ping { 1 }
Class::MakeMethods::Standard::Hash->make(
-ForceInstall => 1, # Set flag for following methods...
'scalar' => ['ping'] # ... now overwrites pre-existing ping()
);
=head2 Diagnostic Messages
The following warnings and errors may be produced when using
Class::MakeMethods to generate methods. (Note that this list does not
include run-time messages produced by calling the generated methods.)
These messages are classified as follows (listed in increasing order of
desperation):
(Q) A debugging message, only shown if $CONTEXT{Debug} is true
(W) A warning.
(D) A deprecation.
(F) A fatal error in caller's use of the module.
(I) An internal problem with the module or subclasses.
Portions of the message which may vary are denoted with a %s.
=over 4
=item Can't interpret meta-method template: argument is empty or
undefined
(F)
=item Can't interpret meta-method template: unknown template name
'%s'
(F)
=item Can't interpret meta-method template: unsupported template
type '%s'
(F)
=item Can't make method %s(): template specifies unknown behavior
'%s'
(F)
=item Can't parse meta-method declaration: argument is empty or
undefined
(F) You passed an undefined value or an empty string in the list
of meta-method declarations to use or make.
=item Can't parse meta-method declaration: missing name attribute.
(F) You included an hash-ref-style meta-method declaration that
did not include the required name attribute. You may have meant
this to be an attributes hash for a previously specified name, but
if so we were unable to locate it.
=item Can't parse meta-method declaration: unknown template name
'%s'
(F) You included a template specifier of the form C<'-I<template_name>'>
in a the list of meta-method declaration, but that template is not
available.
=item Can't parse meta-method declaration: unsupported declaration
type '%s'
(F) You included an unsupported type of value in a list of meta-method
declarations.
=item Compilation error: %s
(I)
=item Not an interpretable meta-method: '%s'
(I)
=item Odd number of arguments passed to %s make
(F) You specified an odd number of arguments in a call to use or
make. The arguments should be key => value pairs.
=item Unable to compile generated method %s(): %s
(I) The install_methods subroutine attempted to compile a subroutine
by calling eval on a provided string, which failed for the indicated
reason, usually some type of Perl syntax error.
=item Unable to dynamically load $package: $%s
(F)
=item Unable to install code for %s() method: '%s'
(I) The install_methods subroutine was passed an unsupported value
as the code to install for the named method.
=item Unexpected return value from compilation of %s(): '%s'
(I) The install_methods subroutine attempted to compile a subroutine
by calling eval on a provided string, but the eval returned something
other than than the code ref we expect.
=item Unexpected return value from meta-method constructor %s: %s
(I) The requested method-generator was invoked, but it returned an unacceptable value.
=back
=head1 EXTENDING
Class::MakeMethods can be extended by creating subclasses that
define additional meta-method types. Callers then select your
subclass using any of the several techniques described above.
=head2 Creating A Subclass
The begining of a typical extension might look like the below:
package My::UpperCaseMethods;
use strict;
use Class::MakeMethods '-isasubclass';
sub my_method_type { ... }
You can name your subclass anything you want; it does not need to
begin with Class::MakeMethods.
The '-isasubclass' flag is a shortcut that automatically puts
Class::MakeMethods into your package's @ISA array so that it will
inherit the import() and make() class methods. If you omit this
flag, you will need to place the superclass in your @ISA explicitly.
Typically, the subclass should B<not> inherit from Exporter; both
Class::MakeMethods and Exporter are based on inheriting an import
class method, and getting a subclass to support both would require
additional effort.
=head2 Naming Method Types
Each type of method that can be generated is defined in a subroutine
of the same name. You can give your meta-method type any name that
is a legal subroutine identifier.
(Names begining with an underscore, and the names C<import> and
C<make>, are reserved for internal use by Class::MakeMethods.)
If you plan on distributing your extension, you may wish to follow
the "Naming Convention for Generated Method Types" described above
to facilitate reuse by others.
=head2 Implementation Options
Each method generation subroutine can be implemented in any one of
the following ways:
=over 4
=item *
Subroutine Generation
Returns a list of subroutine name/code pairs.
The code returned may either be a coderef, or a string containing
Perl code that can be evaled and will return a coderef. If the eval
fails, or anything other than a coderef is returned, then
Class::MakeMethods croaks.
For example a simple sub-class with a method type upper_case_get_set
that generates an accessor method for each argument provided might
look like this:
package My::UpperCaseMethods;
use Class::MakeMethods '-isasubclass';
sub uc_scalar {
my $class = shift;
map {
my $name = $_;
$name => sub {
my $self = shift;
if ( scalar @_ ) {
$self->{ $name } = uc( shift )
} else {
$self->{ $name };
}
}
} @_;
}
Callers could then generate these methods as follows:
use My::UpperCaseMethods ( 'uc_scalar' => 'foo' );
=item *
Aliasing
Returns a string containing a different meta-method type to use
for those same arguments.
For example a simple sub-class that defines a method type stored_value
might look like this:
package My::UpperCaseMethods;
use Class::MakeMethods '-isasubclass';
sub regular_scalar { return 'Basic::Hash:scalar' }
And here's an example usage:
use My::UpperCaseMethods ( 'regular_scalar' => [ 'foo' ] );
=item *
Rewriting
Returns one or more array references with different meta-method
types and arguments to use.
For example, the below meta-method definition reviews the name of
each method it's passed and creates different types of meta-methods
based on whether the declared name is in all upper case:
package My::UpperCaseMethods;
use Class::MakeMethods '-isasubclass';
sub auto_detect {
my $class = shift;
my @rewrite = ( [ 'Basic::Hash:scalar' ],
[ '::My::UpperCaseMethods:uc_scalar' ] );
foreach ( @_ ) {
my $name_is_uppercase = ( $_ eq uc($_) ) ? 1 : 0;
push @{ $rewrite[ $name_is_uppercase ] }, $_
}
return @rewrite;
}
The following invocation would then generate a regular scalar accessor method foo, and a uc_scalar method BAR:
use My::UpperCaseMethods ( 'auto_detect' => [ 'foo', 'BAR' ] );
=item *
Generator Object
Returns an object with a method named make_methods which will be responsible for returning subroutine name/code pairs.
See L<Class::MakeMethods::Template> for an example.
=item *
Self-Contained
Your code may do whatever it wishes, and return an empty list.
=back
=head2 Access to Parameters
Global parameter values are available through the _context() class method at the time that method generation is being performed.
package My::Maker;
sub my_methodtype {
my $class = shift;
warn "Installing in " . $class->_context('TargetClass');
...
}
=over 4
=item *
TargetClass
Class into which code should be installed.
=item *
MakerClass
Which subclass of Class::MakeMethods will generate the methods?
=item *
ForceInstall
Controls whether generated methods will be installed over pre-existing methods in the target package.
=back
=head1 SEE ALSO
=head2 Package Documentation
A collection of sample uses is available in
L<Class::MakeMethods::Docs::Examples>.
See the documentation for each family of subclasses:
=over 4
=item *
L<Class::MakeMethods::Basic>
=item *
L<Class::MakeMethods::Standard>
=item *
L<Class::MakeMethods::Composite>
=item *
L<Class::MakeMethods::Template>
=back
A listing of available method types from each of the different
subclasses is provided in L<Class::MakeMethods::Docs::Catalog>.
=head2 Related Modules
For a brief survey of the numerous modules on CPAN which offer some
type of method generation, see L<Class::MakeMethods::Docs::RelatedModules>.
If you have used Class::MethodMaker, you will note numerous
similarities. Class::MakeMethods is based on Class::MethodMaker,
but has been substantially revised in order to provide a range of
new features. Backward compatibility and conversion documentation
is provded in L<Class::MakeMethods::Emulator::MethodMaker>.
In several cases, Class::MakeMethods provides functionality closely
equivalent to that of an existing module, and emulator modules are
provided to map the existing module's interface to that of
Class::MakeMethods. See L<Class::MakeMethods::Emulator> for more
information.
=head2 Perl Docs
See L<perlboot> for a quick introduction to objects for beginners.
For an extensive discussion of various approaches to class
construction, see L<perltoot> and L<perltootc> (called L<perltootc>
in the most recent versions of Perl).
See L<perlref/"Making References">, point 4 for more information
on closures. (FWIW, I think there's a big opportunity for a "perlfunt"
podfile bundled with Perl in the tradition of "perlboot" and
"perltoot", exploring the utility of function references, callbacks,
closures, and continuations... There are a bunch of useful references
available, but not a good overview of how they all interact in a
Perlish way.)
=head1 BUGS AND SUPPORT
=head2 Release Status
This module has been used in a variety of production systems and
has been available on CPAN for over two years, with several other
distributions dependant on it, so it would be fair to say that it
is fully released.
However, while some portions are well tested, others are less so,
and new bug reports do trickle in occasionally. If you do encounter
any problems, please inform the author and I'll endeavor to patch
them promptly.
Additional features have been outlined for future development, but
the intent is support these by adding more options to the declaration
interface, while maintaining backward compatibility.
=head2 Known Problems
It does not appear to be possible to assign subroutine names to
closures within Perl. As a result, debugging output from Carp and
similar sources will show all generated methods as "ANON()" rather
than "YourClass::methodname()".
See L<Class::MakeMethods::Docs::ToDo> for other outstanding issues
and development plans.
=head2 Support
If you have questions or feedback about this module, please feel
free to contact the author at the below address. Although there is
no formal support program, I do attempt to answer email promptly.
I would be particularly interested in any suggestions towards
improving the documentation, correcting any Perl-version or platform
dependencies, as well as general feedback and suggested additions.
Bug reports that contain a failing test case are greatly appreciated,
and suggested patches will be promptly considered for inclusion in
future releases.
To report bugs via the CPAN web tracking system, go to
C<http://rt.cpan.org/NoAuth/Bugs.html?Dist=Class-MakeMethods> or send mail
to C<Dist=Class-MakeMethods#rt.cpan.org>, replacing C<#> with C<@>.
=head2 Community
If you've found this module useful or have feedback about your
experience with it, consider sharing your opinion with other Perl
users by posting your comment to CPAN's ratings system:
=over 2
=item *
http://cpanratings.perl.org/rate/?distribution=Class-MakeMethods
=back
For more general discussion, you may wish to post a message on PerlMonks or the comp.lang.perl.misc newsgroup:
=over 2
=item *
http://www.perlmonks.org/index.pl?node=Seekers%20of%20Perl%20Wisdom
=item *
http://groups.google.com/groups?group=comp.lang.perl.misc
=back
=head1 DISTRIBUTION AND INSTALLATION
=head2 Version
This is Class::MakeMethods v1.009, intended for general use.
This module's CPAN registration should read:
Name DSLIP Description
-------------- ----- ---------------------------------------------
Class::
::MakeMethods RdpOp Generate common types of methods
=head2 Prerequisites
In general, this module should work with Perl 5.003 or later,
without requring any modules beyond the core Perl distribution.
The following optional feature may not be available on some platforms:
=over 4
=item *
Class::MakeMethods::Attribute: The C<:MakeMethod> subroutine attribute requires Perl version 5.6 and the Attribute::Handlers module (from CPAN).
=item *
Class::MakeMethods::Template C<--lvalue>: The lvalue modifier provided by the Template generator subclasses will only work on Perl version 5.6 or later.
=back
=head2 Installation
You should be able to install this module using the CPAN shell interface:
perl -MCPAN -e 'install Class::MakeMethods'
Alternately, you may retrieve this package from CPAN or from the author's site:
=over 2
=item *
http://search.cpan.org/~evo/
=item *
http://www.cpan.org/modules/by-authors/id/E/EV/EVO
=item *
http://www.evoscript.org/Class-MakeMethods/dist/
=back
After downloading the distribution, follow the normal procedure to unpack and install it, using the commands shown below or their local equivalents on your system:
tar xzf Class-MakeMethods-*.tar.gz
cd Class-MakeMethods-*
perl Makefile.PL
make test && sudo make install
Thanks to the kind generosity of other members of the Perl community,
this distribution is also available repackaged in the FreeBSD
"ports" and Linux RPM formats. This may simplify installation for
some users, but be aware that these alternate distributions may
lag a few versions behind the latest release on CPAN.
=over 2
=item *
http://www.freebsd.org/cgi/ports.cgi?query=Class-MakeMethods
=item *
http://www.rpmfind.net/linux/rpm2html/search.php?query=perl-Class-MakeMethods
=back
=head2 Tested Platforms
This release has been tested succesfully on the following platforms:
5.6.1 on darwin
Earlier releases have also tested OK on the following platforms:
IP30-R12000-irix
OpenBSD.i386-openbsd
i386-freebsd / i386-freebsd-thread-multi
i386-linux
i386-netbsd / i386-netbsd-thread-multi
i586-linux / i586-linux-thread-multi-ld
i686-linux / i686-pld-linux-thread-multi
ia64-linux
ppc-linux
sparc-linux
sparc-netbsd
sun4-solaris
Some earlier versions failed to "make test" on MSWin32, although
a forced installation would still work; that problem should be
fixed in the most recent releases.
You may also review the current test results from CPAN-Testers:
=over 2
=item *
http://testers.cpan.org/show/Class-MakeMethods.html
=back
=head1 CREDITS AND COPYRIGHT
=head2 Author
Developed by Matthew Simon Cavalletto at Evolution Softworks.
More free Perl software is available at C<www.evoscript.org>.
You may contact the author directly at C<evo@cpan.org> or C<simonm@cavalletto.org>.
=head2 Feedback and Suggestions
Thanks to the following people for bug reports, suggestions, and other feedback:
Martyn J. Pearce
Scott R. Godin
Ron Savage
Jay Lawrence
Adam Spiers
Malcolm Cook
Terrence Brannon
Jared Rhine
Peter Chen
Mike Castle
=head2 Source Material
This package was inspired by the ground-breaking original closure-generating method maker module:
Class::MethodMaker, by Peter Seibel.
Additional inspiration, cool tricks, and blocks of useful code for
this module were extracted from the following CPAN modules:
Class::Accessor, by Michael G Schwern
Class::Contract, by Damian Conway
Class::SelfMethods, by Toby Everett
=head2 Copyright
Copyright 2002, 2003 Matthew Simon Cavalletto.
Portions copyright 1998, 1999, 2000, 2001 Evolution Online Systems, Inc.
Based on Class::MethodMaker, originally developed by Peter Seibel. Portions Copyright 1996 Organic Online. Portions Copyright 2000 Martyn J. Pearce.
Class::MakeMethods::Emulator::accessors is based on accessors. Portions by Steve Purkis.
Class::MakeMethods::Emulator::AccessorFast is based on Class::Accessor::Fast. Portions Copyright 2000 Michael G Schwern.
Class::MakeMethods::Emulator::Inheritable is based on Class::Data::Inheritable. Portions Copyright 2000 Damian Conway and Michael G Schwern.
Class::MakeMethods::Emulator::mcoder is based on mcoder. Portions Copyright 2003 by Salvador Fandiño.
Class::MakeMethods::Emulator::Singleton is based on Class::Singleton, by Andy Wardley. Portions Copyright 1998 Canon Research Centre Europe Ltd.
Class::MakeMethods::Utility::Ref is based on Ref.pm. Portions Copyright 1994 David Muir Sharnoff.
=head2 License
You may use, modify, and distribute this software under the same terms as Perl.
=cut