=for rcs $Id$
=head1 NAME
Prima::Drawable - 2-D graphic interface
=head1 SYNOPSIS
if ( $object-> isa('Prima::Drawable')) {
$object-> begin_paint;
$object-> color( cl::Black);
$object-> line( 100, 100, 200, 200);
$object-> ellipse( 100, 100, 200, 200);
$object-> end_paint;
}
=head1 DESCRIPTION
Prima::Drawable is a descendant of Prima::Component.
It provides access to the object-bound graphic context and canvas
through its methods and properties. The Prima::Drawable
descendants Prima::Widget, Prima::Image, Prima::DeviceBitmap
and Prima::Printer are backed by system-dependent routines
that allow drawing and painting on the system objects.
=head1 USAGE
Prima::Drawable, as well as its ancestors Prima::Component and
Prima::Object, is never used directly, because Prima::Drawable class
by itself provides only the interface. It provides a
three-state object access - when drawing and painting is enabled,
when these are disabled, and the information acquisition state.
By default, the object is created in paint-disabled state. To
switch to the enabled state, begin_paint() method is used. Once in the enabled state,
the object drawing and painting methods apply to the object-bound canvas.
To return to the disabled state, end_paint() method is called.
The information state can be managed by using
begin_paint_info() and end_paint_info() methods pair. An object
cannot be triggered from the information state
to the enabled state ( and vice versa ) directly.
These states differ on how do they apply to a graphic context and
a canvas.
=head2 Graphic context and canvas
The graphic context is the set of variables, that control how exactly
graphic primitives are rendered. The variable examples are color, font,
line width, etc.
Another term used here is 'canvas' - the graphic area of a certain extent,
bound to the object, where the drawing and painting methods are applied to.
In all three states a graphic context is allowed to be modified, but
in different ways.
In the disabled state the graphic context values form a template values;
when a object enters the information or the enabled state, the values
are preserved, but when the object is back to the disabled state,
the graphic context is restored to the values last assigned before entering
new state. The code example below illustrates the idea:
$d = Prima::Drawable-> create;
$d-> lineWidth( 5);
$d-> begin_paint_info;
# lineWidth is 5 here
$d-> lineWidth( 1);
# lineWidth is 1
$d-> end_paint_info;
# lineWidth is 5 again
( Note: C<::region>, C<::clipRect> and C<::translate> properties are exceptions.
They can not be used in the disabled state; their values are neither
recorded nor used as a template).
That is, in disabled state any Drawable maintains only the graphic context.
To draw on a canvas, the object must enter the enabled state by calling begin_paint().
This function can be unsuccessful, because the object binds with system resources
during this stage, and might fail. Only after the enabled state is entered,
the canvas is accessible:
$d = Prima::Image-> create( width => 100, height => 100);
if ( $d-> begin_paint) {
$d-> color( cl::Black);
$d-> bar( 0, 0, $d-> size);
$d-> color( cl::White);
$d-> fill_ellipse( $d-> width / 2, $d-> height / 2, 30, 30);
$d-> end_paint;
} else {
die "can't draw on image:$@";
}
Different objects are mapped to different types of canvases -
Prima::Image canvas pertains its content after end_paint(),
Prima::Widget maps it to a screen area, which content is of
more transitory nature, etc.
The information state is as same as the enabled state, but the changes to
a canvas are not visible. Its sole purpose is to read, not to write information.
Because begin_paint() requires some amount of system resources, there is
a chance that a resource request can fail, for any reason. The begin_paint_info()
requires some resources as well, but usually much less, and therefore
if only information is desired, it is usually faster and cheaper to
obtain it inside the information state. A notable example is
get_text_width() method, that returns the length of a text string in pixels.
It works in both enabled and information states, but code
$d = Prima::Image-> create( width => 10000, height => 10000);
$d-> begin_paint;
$x = $d-> get_text_width('A');
$d-> end_paint;
is much more 'expensive' than
$d = Prima::Image-> create( width => 10000, height => 10000);
$d-> begin_paint_info;
$x = $d-> get_text_width('A');
$d-> end_paint_info;
for the obvious reasons.
It must be noted that some information methods like get_text_width()
work even under the disabled state; the object is switched to
the information state implicitly if it is necessary.
=head2 Color space
Graphic context and canvas operations rely completely
on a system implementation. The internal canvas color representation
is therefore system-specific, and usually could not be described
in standard definitions. Often the only information available
about color space is its color depth.
Therefore, all color manipulations, including dithering and
antialiasing are subject to system implementation, and can not
be controlled from perl code. When a property is set in the object
disabled state, it is recorded verbatim; color properties
are no exception. After the object switched to the enabled
state, a color value is transformed to a system color representation,
which might be different from Prima's. For example, if a display color depth is 15 bits,
5 bits for every component, then white color value 0xffffff
is mapped to
11111000 11111000 11111000
--R----- --G----- --B-----
that equals to 0xf8f8f8, not 0xffffff ( See L<Prima::gp-problems> for
inevident graphic issues discussion ).
The Prima::Drawable color format is RRGGBB, with each component
resolution of 8 bit, thus allowing 2^24 color combinations. If the device color space
depth is different, the color is truncated or expanded automatically. In
case the device color depth is small, dithering algorithms might apply.
Note: not only color properties, but all graphic context properties
allow all possible values in the disabled state, which transformed into
system-allowed values in the enabled and the information states.
This feature can be used to test if a graphic device is capable of
performing certain operations ( for example,
if it supports raster operations - the printers usually do not ). Example:
$d-> begin_paint;
$d-> rop( rop::Or);
if ( $d-> rop != rop::Or) { # this assertion is always false without
... # begin_paint/end_paint brackets
}
$d-> end_paint;
There are ( at least ) two color properties on each drawable -
C<::color> and C<::backColor>. The values they operate are integers
in the discussed above RRGGBB format, however, the toolkit defines
some mnemonic color constants:
cl::Black
cl::Blue
cl::Green
cl::Cyan
cl::Red
cl::Magenta
cl::Brown
cl::LightGray
cl::DarkGray
cl::LightBlue
cl::LightGreen
cl::LightCyan
cl::LightRed
cl::LightMagenta
cl::Yellow
cl::White
cl::Gray
As stated before, it is not unlikely that if a device color depth
is small, the primitives plotted in particular colors
will be drawn with dithered or incorrect colors. This usually happens
on paletted displays, with 256 or less colors.
There exists two methods that facilitate the correct color representation.
The first way is to get as much information as possible about the device.
The methods get_nearest_color() and get_physical_palette()
provide possibility to avoid mixed colors drawing by obtaining
indirect information about solid colors, supported by a device.
Another method is to use C<::palette> property. It works by inserting
the colors into the system palette, so if an application
knows the colors it needs beforehand, it can employ this method - however
this might result in system palette flash when a window focus toggles.
Both of these methods are applicable both with drawing routines and image output.
An image desired to output with least distortion is advised to
export its palette to an output device, because images usually are not
subject to automatic dithering algorithms. Prima::ImageViewer module
employs this scheme.
=head2 Monochrome bitmaps
A special case of C<put_image> is taken where the object to be drawn is a
monochrome DeviceBitmap object. This object doesn't possess the color palette,
and is by definition a bitmap, where there are only two values present, 0s and
1s. When it is drawn, 0s are drawn with the color value of the target canvas
C<color> property, and 1s with C<backColor>.
This means that the following code
$bitmap-> color(0);
$bitmap-> line(0,0,100,100);
$target-> color(cl::Green);
$target-> put_image(0,0,$bitmap);
produces a green line on C<$target>.
When using monochrome bitmaps for logical operations, note that target colors
should not be explicit 0 and 0xffffff, nor C<cl::Black> and C<cl::White>, but
C<cl::Clear> and C<cl::Set> instead. The reason is that on paletted displays,
system palette may not necessarily contain the white color under palette index
(2^ScreenDepth-1). C<cl::Set> thus signals that the value should be "all ones",
no matter what color it represents, because it will be used for logical
operations.
=head2 Fonts
Prima maintains its own font naming convention, that
usually does not conform to system's. Since its goal
is interoperability, it might be so that some system fonts
would not be accessible from within the toolkit.
Prima::Drawable provides property C<::font>, that accepts/returns a hash,
that represents the state of a font in the object-bound graphic context.
The font hash keys that are acceptable on set-call are:
=over 4
=item name
The font name string. If there is no such font,
a default font name is used. To select default font,
a 'Default' string can be passed with the same result
( unless the system has a font named 'Default', of course).
=item height
An integer value from 1 to MAX_INT. Specifies the desired
extent of a font glyph between descent and ascent lines in pixels.
=item size
An integer value from 1 to MAX_INT. Specifies the desired
extent of a font glyph between descent and internal leading lines in
points. The relation between C<size> and C<height> is
height - internal_leading
size = --------------------------- * 72.27
resolution
That differs from some other system representations:
Win32, for example, rounds 72.27 constant to 72.
=item width
A integer value from 0 to MAX_INT. If greater than 0, specifies the desired
extent of a font glyph width in pixels. If 0, sets the default ( designed )
width corresponding to the font size or height.
=item style
A combination of C<fs::> ( font style ) constants. The constants hight
fs::Normal
fs::Bold
fs::Thin
fs::Italic
fs::Underlined
fs::StruckOut
fs::Outline
and can be OR-ed together to express the font style.
fs::Normal equals to 0 and usually never used.
If some styles are not supported by a system-dependent font subsystem,
they are ignored.
=item pitch
A one of three constants:
fp::Default
fp::Fixed
fp::Variable
fp::Default specifies no interest about font pitch selection.
fp::Fixed is set when a monospaced (all glyphs are of same width) font
is desired. fp::Variable pitch
specifies a font with different glyph widths. This key
is of the highest priority; all other keys may be altered for
the consistency of the pitch key.
=item direction
A counter-clockwise rotation angle - 0 is default, 90 is pi/2, 180 is pi, etc.
If a font could not be rotated, it is usually substituted to the one that can.
=item encoding
A string value, one of the strings returned by
C<Prima::Application::font_encodings>. Selects desired font
encoding; if empty, picks the first matched encoding, preferably
the locale set up by the user.
The encodings provided by different systems are different;
in addition, the only encodings are recognizable by the system,
that are represented by at least one font in the system.
Unix systems and the toolkit PostScript interface usually
provide the following encodings:
iso8859-1
iso8859-2
... other iso8859 ...
fontspecific
Win32 returns the literal strings like
Western
Baltic
Cyrillic
Hebrew
Symbol
=back
A hash that C<::font> returns, is a tied hash, whose
keys are also available as separate properties.
For example,
$x = $d-> font-> {style};
is equivalent to
$x = $d-> font-> style;
While the latter gives nothing but the arguable coding convenience, its
usage in set-call is much more usable:
$d-> font-> style( fs::Bold);
instead of
my %temp = %{$d-> font};
$temp{ style} = fs::Bold;
$d-> font( \%temp);
The properties of a font tied hash are also accessible through set() call,
like in Prima::Object:
$d-> font-> style( fs::Bold);
$d-> font-> width( 10);
is adequate to
$d-> font-> set(
style => fs::Bold,
width => 10,
);
When get-called, C<::font> property returns a hash where
more entries than the described above can be found. These keys
are read-only, their values are discarded if passed to C<::font>
in a set-call.
In order to query the full list of fonts available to
a graphic device, a C<::fonts> method is used. This method is
not present in Prima::Drawable namespace; it can be found in two
built-in class instances, C<Prima::Application> and C<Prima::Printer>.
C<Prima::Application::fonts> returns metrics for the fonts available to
a screen device, while C<Prima::Printer::fonts> ( or its substitute Prima::PS::Printer )
returns fonts for the printing device. The result of this method is an
array of font metrics, fully analogous to these
returned by C<Prima::Drawable::font> method.
=over 4
=item family
A string with font family name. The family is a
secondary string key, used for distinguishing between
fonts with same name but of different vendors ( for example,
Adobe Courier and Microsoft Courier).
=item vector
A boolean; true if the font is vector ( e.g. can be scaled
with no quality loss ), false otherwise. The false value
does not show if the font can be scaled at all - the behavior
is system-dependent. Win32 can scale all non-vector fonts;
X11 only the fonts specified as the scalable.
=item ascent
Number of pixels between a glyph baseline and descent line.
=item descent
Number of pixels between a glyph baseline and descent line.
=item internalLeading
Number of pixels between ascent and internal leading lines.
Negative if the ascent line is below the internal leading line.
=item externalLeading
Number of pixels between ascent and external leading lines.
Negative if the ascent line is above the external leading line.
=for podview <img src="leadings.gif" cut=1>
=for html <p><img src="leadings.gif" id="leadings_gif"><!--
------------- external leading line
$ ------------- ascent line
$ $
------------- internal leading line
$
$$$
$ $
$ $ $
$$$$$$$ $$$
$ $ $ $
$ $ $ $
$ $ $$$ ---- baseline
$
$
$
$$$$ ---- descent line
=for html -->
=for podview </cut>
=item weight
A font designed weight. Can be one of
fw::UltraLight
fw::ExtraLight
fw::Light
fw::SemiLight
fw::Medium
fw::SemiBold
fw::Bold
fw::ExtraBold
fw::UltraBold
constants.
=item maximalWidth
Maximal extent of a glyph in pixels. Equals to B<width> in
monospaced fonts.
=item xDeviceRes
Designed horizontal font resolution in dpi.
=item yDeviceRes
Designed vertical font resolution in dpi.
=item firstChar
Index of the first glyph present in a font.
=item lastChar
Index of the last glyph present in a font.
=item breakChar
Index of the default character used to divide words.
In a typical western language font it is 32, ASCII space character.
=item defaultChar
Index of a glyph that is drawn instead of nonexistent
glyph if its index is passed to the text drawing routines.
=back
=head2 Font ABC metrics
Besides these characteristics, every font glyph has an ABC-metric,
the three integer values that describe horizontal extents of a
glyph's black part relative to the glyph extent:
=for podview <img src="fontabc.gif" cut=1 >
=for html <p><img src="fontabc.gif" id="fontabc_gif"><!--
. . . . . . . .
. . $$$. . . . .
. . $$. $ . . . .
. . $$. . . . $$ . .
. $$$$$$$$$$. . .$$$$$ . .
. . $$ . . . $ $$ . .
. . $$ . . . .$$$$$ . .
. . $$ . . . . $$ . .
. .$$ . . . . $$$ $$$. .
$$ .$$ . . . $ $$ .
.$$$ . . . .$$$$$$$$. .
. . . . . . . .
<A>. .<C> <A>. .<C>
.<-.--B--.->. . .<--B--->. .
A = -3 A = 3
B = 13 B = 10
C = -3 C = 3
=for html -->
=for podview </cut>
A and C are negative, if a glyphs 'hangs' over it neighbors,
as shown in picture on the left. A and C values are positive, if a glyph contains
empty space in front or behind the neighbor glyphs, like in picture on the right.
As can be seen, B is the width of a glyph's black part.
ABC metrics returned by get_font_abc() method.
=head2 Raster operations
A drawable has two raster operation properties: C<::rop> and C<::rop2>.
These define how the graphic primitives are plotted. C<::rop> deals
with the foreground color drawing, and C<::rop2> with the background.
The toolkit defines the following operations:
rop::Blackness # = 0
rop::NotOr # = !(src | dest)
rop::NotSrcAnd # &= !src
rop::NotPut # = !src
rop::NotDestAnd # = !dest & src
rop::Invert # = !dest
rop::XorPut # ^= src
rop::NotAnd # = !(src & dest)
rop::AndPut # &= src
rop::NotXor # = !(src ^ dest)
rop::NotSrcXor # alias for rop::NotXor
rop::NotDestXor # alias for rop::NotXor
rop::NoOper # = dest
rop::NotSrcOr # |= !src
rop::CopyPut # = src
rop::NotDestOr # = !dest | src
rop::OrPut # |= src
rop::Whiteness # = 1
Usually, however, graphic devices support only a small part
of the above set, limiting C<::rop> to the most important operations:
Copy, And, Or, Xor, NoOp. C<::rop2> is usually even more restricted,
supports only Copy and NoOp.
The raster operations apply to all graphic primitives except SetPixel.
=head2 Coordinates
The Prima toolkit employs a geometrical XY grid, where
X ascends rightwards and Y ascends upwards. There, the (0,0)
location is the bottom-left pixel of a canvas.
All graphic primitives use inclusive-inclusive boundaries.
For example,
$d-> bar( 0, 0, 1, 1);
plots a bar that covers 4 pixels: (0,0), (0,1), (1,0) and (1,1).
The coordinate origin can be shifted using C<::translate> property,
that translates the (0,0) point to the given offset. Calls to
C<::translate>, C<::clipRect> and C<::region> always use the 'physical'
(0,0) point, whereas the plotting methods use the transformation result,
the 'logical' (0,0) point.
As noted before, these three properties can not be used in when an object
is in its disabled state.
=head1 API
=head2 Graphic context properties
=over 4
=item backColor COLOR
Reflects background color in the graphic context. All drawing routines
that use non-solid or transparent fill or line patterns use this property value.
=item color COLOR
Reflects foreground color in the graphic context. All drawing routines
use this property value.
=item clipRect X1, Y1, X2, Y2
Selects the clipping rectangle corresponding to the physical canvas origin.
On get-call, returns the extent of the clipping area, if it is not rectangular,
or the clipping rectangle otherwise. The code
$d-> clipRect( 1, 1, 2, 2);
$d-> bar( 0, 0, 1, 1);
thus affects only one pixel at (1,1).
Set-call discards the previous C<::region> value.
Note: C<::clipRect> can not be used while the object is in the paint-disabled state,
its context is neither recorded nor used as a template
( see L<"Graphic context and canvas">).
=item fillWinding BOOLEAN
Affect filling style of complex polygonal shapes filled by C<fillpoly>.
If 1, the filled shape contains no holes; otherwise, holes are present
where the shape edges cross.
Default value: 0
=item fillPattern ( [ @PATTERN ] ) or ( fp::XXX )
Selects 8x8 fill pattern that affects primitives that plot filled shapes:
bar(), fill_chord(), fill_ellipse(), fillpoly(), fill_sector(), floodfill().
Accepts either a C<fp::> constant or a reference to an array of 8 integers,
each representing 8 bits of each line in a pattern, where the first integer
is the topmost pattern line, and the bit 0x80 is the leftmost pixel in the line.
There are some predefined patterns, that can be referred via C<fp::> constants:
fp::Empty
fp::Solid
fp::Line
fp::LtSlash
fp::Slash
fp::BkSlash
fp::LtBkSlash
fp::Hatch
fp::XHatch
fp::Interleave
fp::WideDot
fp::CloseDot
fp::SimpleDots
fp::Borland
fp::Parquet
( the actual patterns are hardcoded in primguts.c )
The default pattern is fp::Solid.
An example below shows encoding of fp::Parquet pattern:
# 76543210
84218421 Hex
0 $ $ $ 51
1 $ $ 22
2 $ $ $ 15
3 $ $ 88
4 $ $ $ 45
5 $ $ 22
6 $ $ $ 54
7 $ $ 88
$d-> fillPattern([ 0x51, 0x22, 0x15, 0x88, 0x45, 0x22, 0x54, 0x88 ]);
On a get-call always returns an array, never a C<fp::> constant.
=item font \%FONT
Manages font context. FONT hash acceptable values are
C<name>, C<height>, C<size>, C<width>, C<style> and C<pitch>.
Synopsis:
$d-> font-> size( 10);
$d-> font-> name( 'Courier');
$d-> font-> set(
style => $x-> font-> style | fs::Bold,
width => 22
);
See L<"Fonts"> for the detailed descriptions.
Applies to text_out(), get_text_width(), get_text_box(), get_font_abc().
=item lineEnd VALUE
Selects a line ending cap for plotting primitives. VALUE
can be one of
le::Flat
le::Square
le::Round
constants. le::Round is the default value.
=item lineJoin VALUE
Selects a line joining style for polygons. VALUE
can be one of
lj::Round
lj::Bevel
lj::Miter
constants. lj::Round is the default value.
=item linePattern PATTERN
Selects a line pattern for plotting primitives.
PATTERN is either a predefined C<lp::> constant, or
a string where each even byte is a length of a dash,
and each odd byte is a length of a gap.
The predefined constants are:
lp::Null # "" /* */
lp::Solid # "\1" /* ___________ */
lp::Dash # "\x9\3" /* __ __ __ __ */
lp::LongDash # "\x16\6" /* _____ _____ */
lp::ShortDash # "\3\3" /* _ _ _ _ _ _ */
lp::Dot # "\1\3" /* . . . . . . */
lp::DotDot # "\1\1" /* ............ */
lp::DashDot # "\x9\6\1\3" /* _._._._._._ */
lp::DashDotDot # "\x9\3\1\3\1\3" /* _.._.._.._.. */
Not all systems are capable of accepting user-defined line patterns,
and in such situation the C<lp::> constants are mapped to the system-defined
patterns. In Win9x, for example, lp::DashDotDot is much different from
its string definition therefore.
Default value is lp::Solid.
=item lineWidth WIDTH
Selects a line width for plotting primitives.
If a VALUE is 0, then a 'cosmetic' pen is used - the thinnest
possible line that a device can plot. If a VALUE is greater than 0,
then a 'geometric' pen is used - the line width is set in device units.
There is a subtle difference between VALUE 0 and 1 in a way
the lines are joined.
Default value is 0.
=item palette [ @PALETTE ]
Selects solid colors in a system palette, as many as possible.
PALETTE is an array of integer triplets, where each is R, G and B
component. The call
$d-> palette([128, 240, 240]);
selects a gray-cyan color, for example.
The return value from get-call is the content of the previous set-call,
not the actual colors that were copied to the system palette.
=item region OBJECT
Selects a clipping region applied to all drawing and painting routines.
The OBJECT is either undef, then the clip region is erased ( no clip ),
or a Prima::Image object with a bit depth of 1. The bit mask of OBJECT
is applied to the system clipping region. If the OBJECT is smaller than
the drawable, its exterior is assigned to clipped area as well.
Discards the previous C<::clipRect> value; successive get-calls
to C<::clipRect> return the boundaries of the region.
Note: C<::region> can not be used while the object is in the paint-disabled state,
its context is neither recorded nor used as a template
( see L<"Graphic context and canvas">).
=item resolution X, Y
A read-only property. Returns horizontal and vertical
device resolution in dpi.
=item rop OPERATION
Selects raster operation that applies to foreground color plotting routines.
See also: C<::rop2>, L<"Raster operations">.
=item rop2 OPERATION
Selects raster operation that applies to background color plotting routines.
See also: C<::rop>, L<"Raster operations">.
=item splinePrecision INT
Selects number of steps to use for each spline segment in C<spline>
and C<fill_spline> calls. In other words, determines smoothness of
a curve. Minimum accepted value, 1, produces straight lines; maximum
value is not present, though it is hardly practical to set it higher
than the output device resolution.
Default value: 24
=item textOpaque FLAG
If FLAG is 1, then text_out() fills the text background area
with C<::backColor> property value before
drawing the text. Default value is 0, when text_out() plots
text only.
See get_text_box().
=item textOutBaseline FLAG
If FLAG is 1, then text_out() plots text on a given Y coordinate
correspondent to font baseline. If FLAG is 0, a Y coordinate is
mapped to font descent line. Default is 0.
=item translate X_OFFSET, Y_OFFSET
Translates the origin point by X_OFFSET and Y_OFFSET.
Does not affect C<::clipRect> and C<::region>. Not cumulative,
so the call sequence
$d-> translate( 5, 5);
$d-> translate( 15, 15);
is equivalent to
$d-> translate( 15, 15);
Note: C<::translate> can not be used while the object is in the paint-disabled state,
its context is neither recorded nor used as a template
( see L<"Graphic context and canvas">).
=back
=head2 Other properties
=over 4
=item height HEIGHT
Selects the height of a canvas.
=item size WIDTH, HEIGHT
Selects the extent of a canvas.
=item width WIDTH
Selects the width of a canvas.
=back
=head2 Graphic primitives methods
=over 4
=item arc X, Y, DIAMETER_X, DIAMETER_Y, START_ANGLE, END_ANGLE
Plots an arc with center in X, Y and DIAMETER_X and DIAMETER_Y axis
from START_ANGLE to END_ANGLE.
Context used: color, backColor, lineEnd, linePattern, lineWidth, rop, rop2
=item bar X1, Y1, X2, Y2
Draws a filled rectangle with (X1,Y1) - (X2,Y2) extents.
Context used: color, backColor, fillPattern, rop, rop2
=item chord X, Y, DIAMETER_X, DIAMETER_Y, START_ANGLE, END_ANGLE
Plots an arc with center in X, Y and DIAMETER_X and DIAMETER_Y axis
from START_ANGLE to END_ANGLE and connects its ends with a straight line.
Context used: color, backColor, lineEnd, linePattern, lineWidth, rop, rop2
=item clear <X1, Y1, X2, Y2>
Draws rectangle filled with pure background color with (X1,Y1) - (X2,Y2) extents.
Can be called without parameters, in this case fills all canvas area.
Context used: backColor, rop2
=item draw_text CANVAS, TEXT, X1, Y1, X2, Y2, [ FLAGS = dt::Default, TAB_INDENT = 1 ]
Draws several lines of text one under another with respect to align and break rules,
specified in FLAGS and TAB_INDENT tab character expansion.
C<draw_text> is a convenience wrapper around C<text_wrap> for drawing the wrapped
text, and also provides the tilde ( ~ )- character underlining support.
The FLAGS is a combination of the following constants:
dt::Left - text is aligned to the left boundary
dt::Right - text is aligned to the right boundary
dt::Center - text is aligned horizontally in center
dt::Top - text is aligned to the upper boundary
dt::Bottom - text is aligned to the lower boundary
dt::VCenter - text is aligned vertically in center
dt::DrawMnemonic - tilde-escapement and underlining is used
dt::DrawSingleChar - sets tw::BreakSingle option to
Prima::Drawable::text_wrap call
dt::NewLineBreak - sets tw::NewLineBreak option to
Prima::Drawable::text_wrap call
dt::SpaceBreak - sets tw::SpaceBreak option to
Prima::Drawable::text_wrap call
dt::WordBreak - sets tw::WordBreak option to
Prima::Drawable::text_wrap call
dt::ExpandTabs - performs tab character ( \t ) expansion
dt::DrawPartial - draws the last line, if it is visible partially
dt::UseExternalLeading - text lines positioned vertically with respect to
the font external leading
dt::UseClip - assign ::clipRect property to the boundary rectangle
dt::QueryLinesDrawn - calculates and returns number of lines drawn
( contrary to dt::QueryHeight )
dt::QueryHeight - if set, calculates and returns vertical extension
of the lines drawn
dt::NoWordWrap - performs no word wrapping by the width of the boundaries
dt::WordWrap - performs word wrapping by the width of the boundaries
dt::Default - dt::NewLineBreak|dt::WordBreak|dt::ExpandTabs|
dt::UseExternalLeading
Context used: color, backColor, font, rop, textOpaque, textOutBaseline
=item ellipse X, Y, DIAMETER_X, DIAMETER_Y
Plots an ellipse with center in X, Y and DIAMETER_X and DIAMETER_Y axis.
Context used: color, backColor, linePattern, lineWidth, rop, rop2
=item fill_chord X, Y, DIAMETER_X, DIAMETER_Y, START_ANGLE, END_ANGLE
Fills a chord outline with center in X, Y and DIAMETER_X and DIAMETER_Y axis
from START_ANGLE to END_ANGLE (see chord()).
Context used: color, backColor, fillPattern, rop, rop2
=item fill_ellipse X, Y, DIAMETER_X, DIAMETER_Y
Fills an elliptical outline with center in X, Y and DIAMETER_X and DIAMETER_Y axis.
Context used: color, backColor, fillPattern, rop, rop2
=item fillpoly \@POLYGON
Fills a polygonal area defined by POLYGON set of points.
POLYGON must present an array of integer pair in (X,Y) format.
Example:
$d-> fillpoly([ 0, 0, 15, 20, 30, 0]); # triangle
Context used: color, backColor, fillPattern, rop, rop2, fillWinding
Returns success flag; if failed, C<$@> contains the error.
See also: polyline().
=item fill_sector X, Y, DIAMETER_X, DIAMETER_Y, START_ANGLE, END_ANGLE
Fills a sector outline with center in X, Y and DIAMETER_X and DIAMETER_Y axis
from START_ANGLE to END_ANGLE (see sector()).
Context used: color, backColor, fillPattern, rop, rop2
=item fill_spline \@POLYGON
Fills a polygonal area defined by a curve, projected by applying
cubic spline interpolation to POLYGON set of points.
Number of vertices between each polygon equals to current value of C<splinePrecision> property.
POLYGON must present an array of integer pair in (X,Y) format.
Example:
$d-> fill_spline([ 0, 0, 15, 20, 30, 0]);
Context used: color, backColor, fillPattern, rop, rop2, splinePrecision
Returns success flag; if failed, C<$@> contains the error.
See also: spline, splinePrecision, render_spline
=item flood_fill X, Y, COLOR, SINGLEBORDER = 1
Fills an area of the canvas in current fill context.
The area is assumed to be bounded as specified by the SINGLEBORDER parameter.
SINGLEBORDER can be 0 or 1.
SINGLEBORDER = 0: The fill area is bounded by the color specified by
the COLOR parameter.
SINGLEBORDER = 1: The fill area is defined by the color that
is specified by COLOR.
Filling continues outward in all directions as long as the color
is encountered. This style is useful for filling areas with
multicolored boundaries.
Context used: color, backColor, fillPattern, rop, rop2
=item line X1, Y1, X2, Y2
Plots a straight line from (X1,Y1) to (X2,Y2).
Context used: color, backColor, linePattern, lineWidth, rop, rop2
=item lines \@LINES
LINES is an array of integer quartets in format (X1,Y1,X2,Y2).
lines() plots a straight line per quartet.
Context used: color, backColor, linePattern, lineWidth, rop, rop2
Returns success flag; if failed, C<$@> contains the error.
=item pixel X, Y, <COLOR>
::pixel is a property - on set-call it changes the pixel value at (X,Y)
to COLOR, on get-call ( without COLOR ) it does return a pixel value at (X,Y).
No context is used.
=item polyline \@POLYGON
Draws a polygonal area defined by POLYGON set of points.
POLYGON must present an array of integer pair in (X,Y) format.
Context used: color, backColor, linePattern, lineWidth, lineJoin, lineEnd, rop, rop2
Returns success flag; if failed, C<$@> contains the error.
See also: fillpoly().
=item put_image X, Y, OBJECT, [ ROP ]
Draws an OBJECT at coordinates (X,Y). OBJECT must be Prima::Image,
Prima::Icon or Prima::DeviceBitmap. If ROP raster operation is specified,
it is used. Otherwise, value of C<::rop> property is used.
Returns success flag; if failed, C<$@> contains the error.
Context used: rop; color and backColor for a monochrome DeviceBitmap
=item put_image_indirect OBJECT, X, Y, X_FROM, Y_FROM, DEST_WIDTH, DEST_HEIGHT, SRC_WIDTH, SRC_HEIGHT, ROP
Copies a OBJECT from a source rectangle into a destination rectangle,
stretching or compressing the OBJECT to fit the dimensions of the
destination rectangle, if necessary.
The source rectangle starts at (X_FROM,Y_FROM), and is SRC_WIDTH pixels wide
and SRC_HEIGHT pixels tall.
The destination rectangle starts at (X,Y), and is abs(DEST_WIDTH) pixels wide
and abs(DEST_HEIGHT) pixels tall.
If DEST_WIDTH or DEST_HEIGHT are
negative, a mirroring by respective axis is performed.
OBJECT must be Prima::Image, Prima::Icon or Prima::DeviceBitmap.
No context is used, except color and backColor for a monochrome DeviceBitmap
Returns success flag; if failed, C<$@> contains the error.
=item rect3d X1, Y1, X2, Y2, WIDTH, LIGHT_COLOR, DARK_COLOR, [ BACK_COLOR ]
Draws 3d-shaded rectangle in boundaries X1,Y1 - X2,Y2 with WIDTH line width
and LIGHT_COLOR and DARK_COLOR colors. If BACK_COLOR is specified, paints
an inferior rectangle with it, otherwise the inferior rectangle is not touched.
Context used: rop; color and backColor for a monochrome DeviceBitmap
=item rect_focus X1, Y1, X2, Y2, [ WIDTH = 1 ]
Draws a marquee rectangle in boundaries X1,Y1 - X2,Y2 with WIDTH line width.
No context is used.
=item rectangle X1, Y1, X2, Y2
Plots a rectangle with (X1,Y1) - (X2,Y2) extents.
Context used: color, backColor, linePattern, lineWidth, rop, rop2
=item sector X, Y, DIAMETER_X, DIAMETER_Y, START_ANGLE, END_ANGLE
Plots an arc with center in X, Y and DIAMETER_X and DIAMETER_Y axis
from START_ANGLE to END_ANGLE and connects its ends and (X,Y) with
two straight lines.
Context used: color, backColor, lineEnd, linePattern, lineWidth, rop, rop2
=item spline \@POLYGON
Draws a cubic spline defined by set of POLYGON points.
Number of vertices between each polygon equals to current value of C<splinePrecision> property.
POLYGON must present an array of integer pair in (X,Y) format.
Context used: color, backColor, linePattern, lineWidth, lineEnd, rop, rop2
Returns success flag; if failed, C<$@> contains the error.
See also: fill_spline, splinePrecision, render_spline.
=item stretch_image X, Y, DEST_WIDTH, DEST_HEIGHT, OBJECT, [ ROP ]
Copies a OBJECT into a destination rectangle, stretching or compressing
the OBJECT to fit the dimensions of the destination rectangle, if necessary.
If DEST_WIDTH or DEST_HEIGHT are negative, a mirroring is performed.
The destination rectangle starts at (X,Y) and is DEST_WIDTH pixels wide
and DEST_HEIGHT pixels tall.
If ROP raster operation is specified, it is used. Otherwise, value of C<::rop>
property is used.
OBJECT must be Prima::Image, Prima::Icon or Prima::DeviceBitmap.
Returns success flag; if failed, C<$@> contains the error.
Context used: rop
=item text_out TEXT, X, Y
Draws TEXT string at (X,Y).
Returns success flag; if failed, C<$@> contains the error.
Context used: color, backColor, font, rop, textOpaque, textOutBaseline
=back
=head2 Methods
=over 4
=item begin_paint
Enters the enabled ( active paint ) state, returns success flag; if failed,
C<$@> contains the error.
Once the object is in enabled state, painting and drawing
methods can perform write operations on a canvas.
See also: C<end_paint>, C<begin_paint_info>, L<"Graphic context and canvas">
=item begin_paint_info
Enters the information state, returns success flag; if failed,
C<$@> contains the error.
The object information state is same as enabled state ( see C<begin_paint>),
except painting and drawing methods do not change the object canvas.
See also: C<end_paint_info>, C<begin_paint>, L<"Graphic context and canvas">
=item end_paint
Exits the enabled state and returns the object to a disabled state.
See also: C<begin_paint>, L<"Graphic context and canvas">
=item end_paint_info
Exits the information state and returns the object to a disabled state.
See also: C<begin_paint_info>, L<"Graphic context and canvas">
=item font_match \%SOURCE, \%DEST, PICK = 1
Performs merging of two font hashes, SOURCE and DEST.
Returns the merge result. If PICK is true, matches the result
with a system font repository.
Called implicitly by C<::font> on set-call, allowing the following
example to work:
$d-> font-> set( size => 10);
$d-> font-> set( style => fs::Bold);
In the example, the hash 'style => fs::Bold' does not overwrite
the previous font context ( 'size => 10' ) but gets added to it ( by font_match()),
providing the resulting font with both font properties set.
=item fonts <FAMILY = "", ENCODING = "">
Member of C<Prima::Application> and C<Prima::Printer>, does not
present in C<Prima::Drawable>.
Returns an array of font metric hashes for a given font FAMILY
and ENCODING. Every hash has full set of elements described in L<"Fonts">.
If called without parameters, returns an array of same hashes
where each hash represents a member of font family from every
system font set. It this special case, each font hash contains
additional C<encodings> entry, which points to an array of encodings
available for the font.
If called with FAMILY parameter set but no ENCODING is set, enumerates
all combinations of fonts with all available encodings.
If called with FAMILY set to an empty string, but ENCODING specified,
returns only fonts that can be displayed with the encoding.
Example:
print sort map {"$_->{name}\n"} @{$::application-> fonts};
=item get_bpp
Returns device color depth. 1 is for black-and-white monochrome,
24 for true color, etc.
=item get_font_abc FIRST_CHAR = -1, LAST_CHAR = -1, UNICODE = 0
Returns ABC font metrics for the given range, starting at
FIRST_CHAR and ending with LAST_CHAR. If parameters are -1,
the default range ( 0 and 255 ) is assumed. UNICODE boolean flag
is responsible of representation of characters in 127-255 range.
If 0, the default, encoding-dependent characters are assumed.
If 1, the U007F-U00FF glyphs from Latin-1 set are used.
The result is an integer array reference, where every character
glyph is referred by three integers, each triplet containing
A, B and C values.
For detailed explanation of ABC meaning, see L<"Font ABC metrics">;
Context used: font
=item get_nearest_color COLOR
Returns a nearest possible solid color in representation
of object-bound graphic device. Always returns same color
if the device bit depth is equals or greater than 24.
=item get_paint_state
Returns paint state value - 0 if the object is in the disabled state,
1 for the enabled state, 2 for the information state.
=item get_physical_palette
Returns an anonymous array of integers, in (R,G,B) format,
every color entry described by three values, in range 0 - 255.
The physical palette array is non-empty only on paletted graphic devices,
the true color devices return an empty array.
The physical palette reflects the solid colors currently available
to all programs in the system. The information is volatile if
the system palette can change colors, since any other application
may change the system colors at any moment.
=item get_text_width TEXT, ADD_OVERHANG = 0
Returns TEXT string width if it would be drawn using currently
selected font.
If ADD_OVERHANG is 1, the first character's absolute A value and the last
character's absolute C value are added to the string if they are negative.
See more on ABC values at L<"Font ABC metrics">.
Context used: font
=item get_text_box TEXT
Returns TEXT string extensions if it would be drawn using currently
selected font.
The result is an anonymous array of 5 points ( 5 integer pairs
in (X,Y) format). These 5 points are offsets for the following string
extents, given the string is plotted at (0,0):
1: start of string at ascent line ( top left )
2: start of string at descent line ( bottom left )
3: end of string at ascent line ( top right )
4: end of string at descent line ( bottom right )
5: concatenation point
The concatenation point coordinates (XC,YC) are coordinated passed to
consequent text_out() call so the conjoint string would plot as if it was a
part of TEXT. Depending on the value of the C<textOutBaseline> property, the
concatenation point is located either on the baseline or on the descent line.
Context used: font, textOutBaseline
=for podview <img src="gettextbox.gif" cut=1>
=for html <p><img src="gettextbox.gif" id="gettextbox_gif"><!--
1 3 3 4
** ****
* * *
*** ***
* * *
**** **
2 4 1 2
=for podview </cut>
=for html -->
=item render_spline VERTICES, [ PRECISION ]
Renders cubic spline from set of VERTICES to a polyline with given precision.
The method can be called as static, i.e. with no object initialized. PRECISION
integer, if not given, is read from C<splinePrecision> property if the method
was called on an alive object; in case of static call, default value 24 is
used.
The method is internally used by C<spline> and C<fill_spline>, and is provided
for cases when these are insufficient.
=item text_wrap TEXT, WIDTH, OPTIONS, TAB_INDENT = 8
Breaks TEXT string in chunks that would fit
into WIDTH pixels wide box.
The break algorithm and its result are governed by OPTIONS integer value
which is a combination of C<tw::> constants:
=over 4
=item tw::CalcMnemonic
Use 'hot key' semantics, when a character preceded by ~ has
special meaning - it gets underlined. If this bit is set, the first tilde character used
as an escapement is not calculated, and never appeared in the result
apart from the escaped character.
=item tw::CollapseTilde
In addition to tw::CalcMnemonic, removes '~' character from
the resulting chunks.
=item tw::CalcTabs
If set, calculates a tab ('\t') character as TAB_INDENT times space characters.
=item tw::ExpandTabs
If set, expands tab ('\t') character as TAB_INDENT times space characters.
=item tw::BreakSingle
Defines procedure behavior when the text cannot be fit in WIDTH,
does not affect anything otherwise.
If set, returns an empty array.
If unset, returns a text broken by minimum number of characters per chunk.
In the latter case, the width of the resulting text blocks B<will> exceed WIDTH.
=item tw::NewLineBreak
Forces new chunk after a newline character ('\n') is met.
If UTF8 text is passed, unicode line break characters C<0x2028> and C<0x2029>
produce same effect as the newline character.
=item tw::SpaceBreak
Forces new chunk after a space character (' ') or a tab character ('\t') are met.
=item tw::ReturnChunks
Defines the result of text_wrap() function.
If set, the array consists of integer pairs,
each consists of a text offset within TEXT and a its length.
If unset, the resulting array consists from text chunks.
=item tw::ReturnLines
Equals to 0, is a mnemonic to an unset tw::ReturnChunks.
=item tw::WordBreak
If unset, the TEXT breaks as soon as the chunk width exceeds WIDTH.
If set, tries to keep words in TEXT so they do not appear in two
chunks, e.g. breaks TEXT by words, not by characters.
=item tw::ReturnFirstLineLength
If set, C<text_wrap> proceeds until the first line is wrapped, either by
width or ( if specified ) by break characters. Returns length of the
resulting line. Used for efficiency when the reverse function to C<get_text_width>
is needed.
=back
If OPTIONS has tw::CalcMnemonic or tw::CollapseTilde bits set,
then the last scalar in the array result is a special hash reference.
The hash contains extra information regarding the 'hot key'
underline position - it is assumed that '~' - escapement denotes
an underlined character. The hash contains the following keys:
=over 4
=item tildeLine
Chunk index that contains the escaped character.
Set to undef if no ~ - escapement was found.
The other hash information is not relevant in this case.
=item tildeStart
Horizontal offset of a beginning of the line that underlines
the escaped character.
=item tildeEnd
Horizontal offset of an end of the line that underlines
the escaped character.
=item tildeChar
The escaped character.
=back
Context used: font
=back
=head1 AUTHOR
Dmitry Karasik, E<lt>dmitry@karasik.eu.orgE<gt>.
=head1 SEE ALSO
L<Prima>, L<Prima::Object>, L<Prima::Image>