=head1 NAME
perlop - Perl operators and precedence
=head1 SYNOPSIS
Perl operators have the following associativity and precedence,
listed from highest precedence to lowest. Note that all operators
borrowed from C keep the same precedence relationship with each other,
even where C's precedence is slightly screwy. (This makes learning
Perl easier for C folks.) With very few exceptions, these all
operate on scalar values only, not array values.
left terms and list operators (leftward)
left ->
nonassoc ++ --
right **
right ! ~ \ and unary + and -
left =~ !~
left * / % x
left + - .
left << >>
nonassoc named unary operators
nonassoc < > <= >= lt gt le ge
nonassoc == != <=> eq ne cmp
left &
left | ^
left &&
left ||
nonassoc .. ...
right ?:
right = += -= *= etc.
left , =>
nonassoc list operators (rightward)
right not
left and
left or xor
In the following sections, these operators are covered in precedence order.
Many operators can be overloaded for objects. See L<overload>.
=head1 DESCRIPTION
=head2 Terms and List Operators (Leftward)
A TERM has the highest precedence in Perl. They include variables,
quote and quote-like operators, any expression in parentheses,
and any function whose arguments are parenthesized. Actually, there
aren't really functions in this sense, just list operators and unary
operators behaving as functions because you put parentheses around
the arguments. These are all documented in L<perlfunc>.
If any list operator (print(), etc.) or any unary operator (chdir(), etc.)
is followed by a left parenthesis as the next token, the operator and
arguments within parentheses are taken to be of highest precedence,
just like a normal function call.
In the absence of parentheses, the precedence of list operators such as
C<print>, C<sort>, or C<chmod> is either very high or very low depending on
whether you are looking at the left side or the right side of the operator.
For example, in
@ary = (1, 3, sort 4, 2);
print @ary; # prints 1324
the commas on the right of the sort are evaluated before the sort, but
the commas on the left are evaluated after. In other words, list
operators tend to gobble up all the arguments that follow them, and
then act like a simple TERM with regard to the preceding expression.
Note that you have to be careful with parentheses:
# These evaluate exit before doing the print:
print($foo, exit); # Obviously not what you want.
print $foo, exit; # Nor is this.
# These do the print before evaluating exit:
(print $foo), exit; # This is what you want.
print($foo), exit; # Or this.
print ($foo), exit; # Or even this.
Also note that
print ($foo & 255) + 1, "\n";
probably doesn't do what you expect at first glance. See
L<Named Unary Operators> for more discussion of this.
Also parsed as terms are the C<do {}> and C<eval {}> constructs, as
well as subroutine and method calls, and the anonymous
constructors C<[]> and C<{}>.
See also L<Quote and Quote-like Operators> toward the end of this section,
as well as L<"I/O Operators">.
=head2 The Arrow Operator
Just as in C and C++, "C<-E<gt>>" is an infix dereference operator. If the
right side is either a C<[...]> or C<{...}> subscript, then the left side
must be either a hard or symbolic reference to an array or hash (or
a location capable of holding a hard reference, if it's an lvalue (assignable)).
See L<perlref>.
Otherwise, the right side is a method name or a simple scalar variable
containing the method name, and the left side must either be an object
(a blessed reference) or a class name (that is, a package name).
See L<perlobj>.
=head2 Auto-increment and Auto-decrement
"++" and "--" work as in C. That is, if placed before a variable, they
increment or decrement the variable before returning the value, and if
placed after, increment or decrement the variable after returning the value.
The auto-increment operator has a little extra builtin magic to it. If
you increment a variable that is numeric, or that has ever been used in
a numeric context, you get a normal increment. If, however, the
variable has been used in only string contexts since it was set, and
has a value that is not the empty string and matches the pattern
C</^[a-zA-Z]*[0-9]*$/>, the increment is done as a string, preserving each
character within its range, with carry:
print ++($foo = '99'); # prints '100'
print ++($foo = 'a0'); # prints 'a1'
print ++($foo = 'Az'); # prints 'Ba'
print ++($foo = 'zz'); # prints 'aaa'
The auto-decrement operator is not magical.
=head2 Exponentiation
Binary "**" is the exponentiation operator. Note that it binds even more
tightly than unary minus, so -2**4 is -(2**4), not (-2)**4. (This is
implemented using C's pow(3) function, which actually works on doubles
internally.)
=head2 Symbolic Unary Operators
Unary "!" performs logical negation, i.e., "not". See also C<not> for a lower
precedence version of this.
Unary "-" performs arithmetic negation if the operand is numeric. If
the operand is an identifier, a string consisting of a minus sign
concatenated with the identifier is returned. Otherwise, if the string
starts with a plus or minus, a string starting with the opposite sign
is returned. One effect of these rules is that C<-bareword> is equivalent
to C<"-bareword">.
Unary "~" performs bitwise negation, i.e., 1's complement. For example,
C<0666 &~ 027> is 0640. (See also L<Integer Arithmetic> and L<Bitwise
String Operators>.)
Unary "+" has no effect whatsoever, even on strings. It is useful
syntactically for separating a function name from a parenthesized expression
that would otherwise be interpreted as the complete list of function
arguments. (See examples above under L<Terms and List Operators (Leftward)>.)
Unary "\" creates a reference to whatever follows it. See L<perlref>.
Do not confuse this behavior with the behavior of backslash within a
string, although both forms do convey the notion of protecting the next
thing from interpretation.
=head2 Binding Operators
Binary "=~" binds a scalar expression to a pattern match. Certain operations
search or modify the string $_ by default. This operator makes that kind
of operation work on some other string. The right argument is a search
pattern, substitution, or transliteration. The left argument is what is
supposed to be searched, substituted, or transliterated instead of the default
$_. The return value indicates the success of the operation. (If the
right argument is an expression rather than a search pattern,
substitution, or transliteration, it is interpreted as a search pattern at run
time. This can be is less efficient than an explicit search, because the
pattern must be compiled every time the expression is evaluated.
Binary "!~" is just like "=~" except the return value is negated in
the logical sense.
=head2 Multiplicative Operators
Binary "*" multiplies two numbers.
Binary "/" divides two numbers.
Binary "%" computes the modulus of two numbers. Given integer
operands C<$a> and C<$b>: If C<$b> is positive, then C<$a % $b> is
C<$a> minus the largest multiple of C<$b> that is not greater than
C<$a>. If C<$b> is negative, then C<$a % $b> is C<$a> minus the
smallest multiple of C<$b> that is not less than C<$a> (i.e. the
result will be less than or equal to zero).
Note than when C<use integer> is in scope, "%" give you direct access
to the modulus operator as implemented by your C compiler. This
operator is not as well defined for negative operands, but it will
execute faster.
Binary "x" is the repetition operator. In scalar context, it
returns a string consisting of the left operand repeated the number of
times specified by the right operand. In list context, if the left
operand is a list in parentheses, it repeats the list.
print '-' x 80; # print row of dashes
print "\t" x ($tab/8), ' ' x ($tab%8); # tab over
@ones = (1) x 80; # a list of 80 1's
@ones = (5) x @ones; # set all elements to 5
=head2 Additive Operators
Binary "+" returns the sum of two numbers.
Binary "-" returns the difference of two numbers.
Binary "." concatenates two strings.
=head2 Shift Operators
Binary "<<" returns the value of its left argument shifted left by the
number of bits specified by the right argument. Arguments should be
integers. (See also L<Integer Arithmetic>.)
Binary ">>" returns the value of its left argument shifted right by
the number of bits specified by the right argument. Arguments should
be integers. (See also L<Integer Arithmetic>.)
=head2 Named Unary Operators
The various named unary operators are treated as functions with one
argument, with optional parentheses. These include the filetest
operators, like C<-f>, C<-M>, etc. See L<perlfunc>.
If any list operator (print(), etc.) or any unary operator (chdir(), etc.)
is followed by a left parenthesis as the next token, the operator and
arguments within parentheses are taken to be of highest precedence,
just like a normal function call. Examples:
chdir $foo || die; # (chdir $foo) || die
chdir($foo) || die; # (chdir $foo) || die
chdir ($foo) || die; # (chdir $foo) || die
chdir +($foo) || die; # (chdir $foo) || die
but, because * is higher precedence than ||:
chdir $foo * 20; # chdir ($foo * 20)
chdir($foo) * 20; # (chdir $foo) * 20
chdir ($foo) * 20; # (chdir $foo) * 20
chdir +($foo) * 20; # chdir ($foo * 20)
rand 10 * 20; # rand (10 * 20)
rand(10) * 20; # (rand 10) * 20
rand (10) * 20; # (rand 10) * 20
rand +(10) * 20; # rand (10 * 20)
See also L<"Terms and List Operators (Leftward)">.
=head2 Relational Operators
Binary "E<lt>" returns true if the left argument is numerically less than
the right argument.
Binary "E<gt>" returns true if the left argument is numerically greater
than the right argument.
Binary "E<lt>=" returns true if the left argument is numerically less than
or equal to the right argument.
Binary "E<gt>=" returns true if the left argument is numerically greater
than or equal to the right argument.
Binary "lt" returns true if the left argument is stringwise less than
the right argument.
Binary "gt" returns true if the left argument is stringwise greater
than the right argument.
Binary "le" returns true if the left argument is stringwise less than
or equal to the right argument.
Binary "ge" returns true if the left argument is stringwise greater
than or equal to the right argument.
=head2 Equality Operators
Binary "==" returns true if the left argument is numerically equal to
the right argument.
Binary "!=" returns true if the left argument is numerically not equal
to the right argument.
Binary "E<lt>=E<gt>" returns -1, 0, or 1 depending on whether the left
argument is numerically less than, equal to, or greater than the right
argument.
Binary "eq" returns true if the left argument is stringwise equal to
the right argument.
Binary "ne" returns true if the left argument is stringwise not equal
to the right argument.
Binary "cmp" returns -1, 0, or 1 depending on whether the left argument is stringwise
less than, equal to, or greater than the right argument.
"lt", "le", "ge", "gt" and "cmp" use the collation (sort) order specified
by the current locale if C<use locale> is in effect. See L<perllocale>.
=head2 Bitwise And
Binary "&" returns its operators ANDed together bit by bit.
(See also L<Integer Arithmetic> and L<Bitwise String Operators>.)
=head2 Bitwise Or and Exclusive Or
Binary "|" returns its operators ORed together bit by bit.
(See also L<Integer Arithmetic> and L<Bitwise String Operators>.)
Binary "^" returns its operators XORed together bit by bit.
(See also L<Integer Arithmetic> and L<Bitwise String Operators>.)
=head2 C-style Logical And
Binary "&&" performs a short-circuit logical AND operation. That is,
if the left operand is false, the right operand is not even evaluated.
Scalar or list context propagates down to the right operand if it
is evaluated.
=head2 C-style Logical Or
Binary "||" performs a short-circuit logical OR operation. That is,
if the left operand is true, the right operand is not even evaluated.
Scalar or list context propagates down to the right operand if it
is evaluated.
The C<||> and C<&&> operators differ from C's in that, rather than returning
0 or 1, they return the last value evaluated. Thus, a reasonably portable
way to find out the home directory (assuming it's not "0") might be:
$home = $ENV{'HOME'} || $ENV{'LOGDIR'} ||
(getpwuid($<))[7] || die "You're homeless!\n";
In particular, this means that you shouldn't use this
for selecting between two aggregates for assignment:
@a = @b || @c; # this is wrong
@a = scalar(@b) || @c; # really meant this
@a = @b ? @b : @c; # this works fine, though
As more readable alternatives to C<&&> and C<||> when used for
control flow, Perl provides C<and> and C<or> operators (see below).
The short-circuit behavior is identical. The precedence of "and" and
"or" is much lower, however, so that you can safely use them after a
list operator without the need for parentheses:
unlink "alpha", "beta", "gamma"
or gripe(), next LINE;
With the C-style operators that would have been written like this:
unlink("alpha", "beta", "gamma")
|| (gripe(), next LINE);
Use "or" for assignment is unlikely to do what you want; see below.
=head2 Range Operators
Binary ".." is the range operator, which is really two different
operators depending on the context. In list context, it returns an
array of values counting (by ones) from the left value to the right
value. This is useful for writing C<foreach (1..10)> loops and for
doing slice operations on arrays. In the current implementation, no
temporary array is created when the range operator is used as the
expression in C<foreach> loops, but older versions of Perl might burn
a lot of memory when you write something like this:
for (1 .. 1_000_000) {
# code
}
In scalar context, ".." returns a boolean value. The operator is
bistable, like a flip-flop, and emulates the line-range (comma) operator
of B<sed>, B<awk>, and various editors. Each ".." operator maintains its
own boolean state. It is false as long as its left operand is false.
Once the left operand is true, the range operator stays true until the
right operand is true, I<AFTER> which the range operator becomes false
again. (It doesn't become false till the next time the range operator is
evaluated. It can test the right operand and become false on the same
evaluation it became true (as in B<awk>), but it still returns true once.
If you don't want it to test the right operand till the next evaluation
(as in B<sed>), use three dots ("...") instead of two.) The right
operand is not evaluated while the operator is in the "false" state, and
the left operand is not evaluated while the operator is in the "true"
state. The precedence is a little lower than || and &&. The value
returned is either the empty string for false, or a sequence number
(beginning with 1) for true. The sequence number is reset for each range
encountered. The final sequence number in a range has the string "E0"
appended to it, which doesn't affect its numeric value, but gives you
something to search for if you want to exclude the endpoint. You can
exclude the beginning point by waiting for the sequence number to be
greater than 1. If either operand of scalar ".." is a constant expression,
that operand is implicitly compared to the C<$.> variable, the current
line number. Examples:
As a scalar operator:
if (101 .. 200) { print; } # print 2nd hundred lines
next line if (1 .. /^$/); # skip header lines
s/^/> / if (/^$/ .. eof()); # quote body
# parse mail messages
while (<>) {
$in_header = 1 .. /^$/;
$in_body = /^$/ .. eof();
# do something based on those
} continue {
close ARGV if eof; # reset $. each file
}
As a list operator:
for (101 .. 200) { print; } # print $_ 100 times
@foo = @foo[0 .. $#foo]; # an expensive no-op
@foo = @foo[$#foo-4 .. $#foo]; # slice last 5 items
The range operator (in list context) makes use of the magical
auto-increment algorithm if the operands are strings. You
can say
@alphabet = ('A' .. 'Z');
to get all the letters of the alphabet, or
$hexdigit = (0 .. 9, 'a' .. 'f')[$num & 15];
to get a hexadecimal digit, or
@z2 = ('01' .. '31'); print $z2[$mday];
to get dates with leading zeros. If the final value specified is not
in the sequence that the magical increment would produce, the sequence
goes until the next value would be longer than the final value
specified.
=head2 Conditional Operator
Ternary "?:" is the conditional operator, just as in C. It works much
like an if-then-else. If the argument before the ? is true, the
argument before the : is returned, otherwise the argument after the :
is returned. For example:
printf "I have %d dog%s.\n", $n,
($n == 1) ? '' : "s";
Scalar or list context propagates downward into the 2nd
or 3rd argument, whichever is selected.
$a = $ok ? $b : $c; # get a scalar
@a = $ok ? @b : @c; # get an array
$a = $ok ? @b : @c; # oops, that's just a count!
The operator may be assigned to if both the 2nd and 3rd arguments are
legal lvalues (meaning that you can assign to them):
($a_or_b ? $a : $b) = $c;
This is not necessarily guaranteed to contribute to the readability of your program.
Because this operator produces an assignable result, using assignments
without parentheses will get you in trouble. For example, this:
$a % 2 ? $a += 10 : $a += 2
Really means this:
(($a % 2) ? ($a += 10) : $a) += 2
Rather than this:
($a % 2) ? ($a += 10) : ($a += 2)
=head2 Assignment Operators
"=" is the ordinary assignment operator.
Assignment operators work as in C. That is,
$a += 2;
is equivalent to
$a = $a + 2;
although without duplicating any side effects that dereferencing the lvalue
might trigger, such as from tie(). Other assignment operators work similarly.
The following are recognized:
**= += *= &= <<= &&=
-= /= |= >>= ||=
.= %= ^=
x=
Note that while these are grouped by family, they all have the precedence
of assignment.
Unlike in C, the assignment operator produces a valid lvalue. Modifying
an assignment is equivalent to doing the assignment and then modifying
the variable that was assigned to. This is useful for modifying
a copy of something, like this:
($tmp = $global) =~ tr [A-Z] [a-z];
Likewise,
($a += 2) *= 3;
is equivalent to
$a += 2;
$a *= 3;
=head2 Comma Operator
Binary "," is the comma operator. In scalar context it evaluates
its left argument, throws that value away, then evaluates its right
argument and returns that value. This is just like C's comma operator.
In list context, it's just the list argument separator, and inserts
both its arguments into the list.
The =E<gt> digraph is mostly just a synonym for the comma operator. It's useful for
documenting arguments that come in pairs. As of release 5.001, it also forces
any word to the left of it to be interpreted as a string.
=head2 List Operators (Rightward)
On the right side of a list operator, it has very low precedence,
such that it controls all comma-separated expressions found there.
The only operators with lower precedence are the logical operators
"and", "or", and "not", which may be used to evaluate calls to list
operators without the need for extra parentheses:
open HANDLE, "filename"
or die "Can't open: $!\n";
See also discussion of list operators in L<Terms and List Operators (Leftward)>.
=head2 Logical Not
Unary "not" returns the logical negation of the expression to its right.
It's the equivalent of "!" except for the very low precedence.
=head2 Logical And
Binary "and" returns the logical conjunction of the two surrounding
expressions. It's equivalent to && except for the very low
precedence. This means that it short-circuits: i.e., the right
expression is evaluated only if the left expression is true.
=head2 Logical or and Exclusive Or
Binary "or" returns the logical disjunction of the two surrounding
expressions. It's equivalent to || except for the very low precedence.
This makes it useful for control flow
print FH $data or die "Can't write to FH: $!";
This means that it short-circuits: i.e., the right expression is evaluated
only if the left expression is false. Due to its precedence, you should
probably avoid using this for assignment, only for control flow.
$a = $b or $c; # bug: this is wrong
($a = $b) or $c; # really means this
$a = $b || $c; # better written this way
However, when it's a list context assignment and you're trying to use
"||" for control flow, you probably need "or" so that the assignment
takes higher precedence.
@info = stat($file) || die; # oops, scalar sense of stat!
@info = stat($file) or die; # better, now @info gets its due
Then again, you could always use parentheses.
Binary "xor" returns the exclusive-OR of the two surrounding expressions.
It cannot short circuit, of course.
=head2 C Operators Missing From Perl
Here is what C has that Perl doesn't:
=over 8
=item unary &
Address-of operator. (But see the "\" operator for taking a reference.)
=item unary *
Dereference-address operator. (Perl's prefix dereferencing
operators are typed: $, @, %, and &.)
=item (TYPE)
Type casting operator.
=back
=head2 Quote and Quote-like Operators
While we usually think of quotes as literal values, in Perl they
function as operators, providing various kinds of interpolating and
pattern matching capabilities. Perl provides customary quote characters
for these behaviors, but also provides a way for you to choose your
quote character for any of them. In the following table, a C<{}> represents
any pair of delimiters you choose. Non-bracketing delimiters use
the same character fore and aft, but the 4 sorts of brackets
(round, angle, square, curly) will all nest.
Customary Generic Meaning Interpolates
'' q{} Literal no
"" qq{} Literal yes
`` qx{} Command yes (unless '' is delimiter)
qw{} Word list no
// m{} Pattern match yes (unless '' is delimiter)
qr{} Pattern yes (unless '' is delimiter)
s{}{} Substitution yes (unless '' is delimiter)
tr{}{} Transliteration no (but see below)
Note that there can be whitespace between the operator and the quoting
characters, except when C<#> is being used as the quoting character.
C<q#foo#> is parsed as being the string C<foo>, while C<q #foo#> is the
operator C<q> followed by a comment. Its argument will be taken from the
next line. This allows you to write:
s {foo} # Replace foo
{bar} # with bar.
For constructs that do interpolation, variables beginning with "C<$>"
or "C<@>" are interpolated, as are the following sequences. Within
a transliteration, the first ten of these sequences may be used.
\t tab (HT, TAB)
\n newline (NL)
\r return (CR)
\f form feed (FF)
\b backspace (BS)
\a alarm (bell) (BEL)
\e escape (ESC)
\033 octal char (ESC)
\x1b hex char (ESC)
\c[ control char
\l lowercase next char
\u uppercase next char
\L lowercase till \E
\U uppercase till \E
\E end case modification
\Q quote non-word characters till \E
If C<use locale> is in effect, the case map used by C<\l>, C<\L>, C<\u>
and C<\U> is taken from the current locale. See L<perllocale>.
All systems use the virtual C<"\n"> to represent a line terminator,
called a "newline". There is no such thing as an unvarying, physical
newline character. It is an illusion that the operating system,
device drivers, C libraries, and Perl all conspire to preserve. Not all
systems read C<"\r"> as ASCII CR and C<"\n"> as ASCII LF. For example,
on a Mac, these are reversed, and on systems without line terminator,
printing C<"\n"> may emit no actual data. In general, use C<"\n"> when
you mean a "newline" for your system, but use the literal ASCII when you
need an exact character. For example, most networking protocols expect
and prefer a CR+LF (C<"\012\015"> or C<"\cJ\cM">) for line terminators,
and although they often accept just C<"\012">, they seldom tolerate just
C<"\015">. If you get in the habit of using C<"\n"> for networking,
you may be burned some day.
You cannot include a literal C<$> or C<@> within a C<\Q> sequence.
An unescaped C<$> or C<@> interpolates the corresponding variable,
while escaping will cause the literal string C<\$> to be inserted.
You'll need to write something like C<m/\Quser\E\@\Qhost/>.
Patterns are subject to an additional level of interpretation as a
regular expression. This is done as a second pass, after variables are
interpolated, so that regular expressions may be incorporated into the
pattern from the variables. If this is not what you want, use C<\Q> to
interpolate a variable literally.
Apart from the above, there are no multiple levels of interpolation. In
particular, contrary to the expectations of shell programmers, back-quotes
do I<NOT> interpolate within double quotes, nor do single quotes impede
evaluation of variables when used within double quotes.
=head2 Regexp Quote-Like Operators
Here are the quote-like operators that apply to pattern
matching and related activities.
Most of this section is related to use of regular expressions from Perl.
Such a use may be considered from two points of view: Perl handles a
a string and a "pattern" to RE (regular expression) engine to match,
RE engine finds (or does not find) the match, and Perl uses the findings
of RE engine for its operation, possibly asking the engine for other matches.
RE engine has no idea what Perl is going to do with what it finds,
similarly, the rest of Perl has no idea what a particular regular expression
means to RE engine. This creates a clean separation, and in this section
we discuss matching from Perl point of view only. The other point of
view may be found in L<perlre>.
=over 8
=item ?PATTERN?
This is just like the C</pattern/> search, except that it matches only
once between calls to the reset() operator. This is a useful
optimization when you want to see only the first occurrence of
something in each file of a set of files, for instance. Only C<??>
patterns local to the current package are reset.
while (<>) {
if (?^$?) {
# blank line between header and body
}
} continue {
reset if eof; # clear ?? status for next file
}
This usage is vaguely deprecated, and may be removed in some future
version of Perl.
=item m/PATTERN/cgimosx
=item /PATTERN/cgimosx
Searches a string for a pattern match, and in scalar context returns
true (1) or false (''). If no string is specified via the C<=~> or
C<!~> operator, the $_ string is searched. (The string specified with
C<=~> need not be an lvalue--it may be the result of an expression
evaluation, but remember the C<=~> binds rather tightly.) See also
L<perlre>.
See L<perllocale> for discussion of additional considerations that apply
when C<use locale> is in effect.
Options are:
c Do not reset search position on a failed match when /g is in effect.
g Match globally, i.e., find all occurrences.
i Do case-insensitive pattern matching.
m Treat string as multiple lines.
o Compile pattern only once.
s Treat string as single line.
x Use extended regular expressions.
If "/" is the delimiter then the initial C<m> is optional. With the C<m>
you can use any pair of non-alphanumeric, non-whitespace characters
as delimiters. This is particularly useful for matching Unix path names
that contain "/", to avoid LTS (leaning toothpick syndrome). If "?" is
the delimiter, then the match-only-once rule of C<?PATTERN?> applies.
If "'" is the delimiter, no variable interpolation is performed on the
PATTERN.
PATTERN may contain variables, which will be interpolated (and the
pattern recompiled) every time the pattern search is evaluated, except
for when the delimiter is a single quote. (Note that C<$)> and C<$|>
might not be interpolated because they look like end-of-string tests.)
If you want such a pattern to be compiled only once, add a C</o> after
the trailing delimiter. This avoids expensive run-time recompilations,
and is useful when the value you are interpolating won't change over
the life of the script. However, mentioning C</o> constitutes a promise
that you won't change the variables in the pattern. If you change them,
Perl won't even notice.
If the PATTERN evaluates to the empty string, the last
I<successfully> matched regular expression is used instead.
If the C</g> option is not used, C<m//> in a list context returns a
list consisting of the subexpressions matched by the parentheses in the
pattern, i.e., (C<$1>, C<$2>, C<$3>...). (Note that here C<$1> etc. are
also set, and that this differs from Perl 4's behavior.) When there are
no parentheses in the pattern, the return value is the list C<(1)> for
success. With or without parentheses, an empty list is returned upon
failure.
Examples:
open(TTY, '/dev/tty');
<TTY> =~ /^y/i && foo(); # do foo if desired
if (/Version: *([0-9.]*)/) { $version = $1; }
next if m#^/usr/spool/uucp#;
# poor man's grep
$arg = shift;
while (<>) {
print if /$arg/o; # compile only once
}
if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/))
This last example splits $foo into the first two words and the
remainder of the line, and assigns those three fields to $F1, $F2, and
$Etc. The conditional is true if any variables were assigned, i.e., if
the pattern matched.
The C</g> modifier specifies global pattern matching--that is, matching
as many times as possible within the string. How it behaves depends on
the context. In list context, it returns a list of all the
substrings matched by all the parentheses in the regular expression.
If there are no parentheses, it returns a list of all the matched
strings, as if there were parentheses around the whole pattern.
In scalar context, each execution of C<m//g> finds the next match,
returning TRUE if it matches, and FALSE if there is no further match.
The position after the last match can be read or set using the pos()
function; see L<perlfunc/pos>. A failed match normally resets the
search position to the beginning of the string, but you can avoid that
by adding the C</c> modifier (e.g. C<m//gc>). Modifying the target
string also resets the search position.
You can intermix C<m//g> matches with C<m/\G.../g>, where C<\G> is a
zero-width assertion that matches the exact position where the previous
C<m//g>, if any, left off. The C<\G> assertion is not supported without
the C</g> modifier; currently, without C</g>, C<\G> behaves just like
C<\A>, but that's accidental and may change in the future.
Examples:
# list context
($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g);
# scalar context
{
local $/ = "";
while (defined($paragraph = <>)) {
while ($paragraph =~ /[a-z]['")]*[.!?]+['")]*\s/g) {
$sentences++;
}
}
}
print "$sentences\n";
# using m//gc with \G
$_ = "ppooqppqq";
while ($i++ < 2) {
print "1: '";
print $1 while /(o)/gc; print "', pos=", pos, "\n";
print "2: '";
print $1 if /\G(q)/gc; print "', pos=", pos, "\n";
print "3: '";
print $1 while /(p)/gc; print "', pos=", pos, "\n";
}
The last example should print:
1: 'oo', pos=4
2: 'q', pos=5
3: 'pp', pos=7
1: '', pos=7
2: 'q', pos=8
3: '', pos=8
A useful idiom for C<lex>-like scanners is C</\G.../gc>. You can
combine several regexps like this to process a string part-by-part,
doing different actions depending on which regexp matched. Each
regexp tries to match where the previous one leaves off.
$_ = <<'EOL';
$url = new URI::URL "http://www/"; die if $url eq "xXx";
EOL
LOOP:
{
print(" digits"), redo LOOP if /\G\d+\b[,.;]?\s*/gc;
print(" lowercase"), redo LOOP if /\G[a-z]+\b[,.;]?\s*/gc;
print(" UPPERCASE"), redo LOOP if /\G[A-Z]+\b[,.;]?\s*/gc;
print(" Capitalized"), redo LOOP if /\G[A-Z][a-z]+\b[,.;]?\s*/gc;
print(" MiXeD"), redo LOOP if /\G[A-Za-z]+\b[,.;]?\s*/gc;
print(" alphanumeric"), redo LOOP if /\G[A-Za-z0-9]+\b[,.;]?\s*/gc;
print(" line-noise"), redo LOOP if /\G[^A-Za-z0-9]+/gc;
print ". That's all!\n";
}
Here is the output (split into several lines):
line-noise lowercase line-noise lowercase UPPERCASE line-noise
UPPERCASE line-noise lowercase line-noise lowercase line-noise
lowercase lowercase line-noise lowercase lowercase line-noise
MiXeD line-noise. That's all!
=item q/STRING/
=item C<'STRING'>
A single-quoted, literal string. A backslash represents a backslash
unless followed by the delimiter or another backslash, in which case
the delimiter or backslash is interpolated.
$foo = q!I said, "You said, 'She said it.'"!;
$bar = q('This is it.');
$baz = '\n'; # a two-character string
=item qq/STRING/
=item "STRING"
A double-quoted, interpolated string.
$_ .= qq
(*** The previous line contains the naughty word "$1".\n)
if /(tcl|rexx|python)/; # :-)
$baz = "\n"; # a one-character string
=item qr/PATTERN/imosx
Quote-as-a-regular-expression operator. I<STRING> is interpolated the
same way as I<PATTERN> in C<m/PATTERN/>. If "'" is used as the
delimiter, no variable interpolation is done. Returns a Perl value
which may be used instead of the corresponding C</STRING/imosx> expression.
For example,
$rex = qr/my.STRING/is;
s/$rex/foo/;
is equivalent to
s/my.STRING/foo/is;
The result may be used as a subpattern in a match:
$re = qr/$pattern/;
$string =~ /foo${re}bar/; # can be interpolated in other patterns
$string =~ $re; # or used standalone
$string =~ /$re/; # or this way
Since Perl may compile the pattern at the moment of execution of qr()
operator, using qr() may have speed advantages in I<some> situations,
notably if the result of qr() is used standalone:
sub match {
my $patterns = shift;
my @compiled = map qr/$_/i, @$patterns;
grep {
my $success = 0;
foreach my $pat @compiled {
$success = 1, last if /$pat/;
}
$success;
} @_;
}
Precompilation of the pattern into an internal representation at the
moment of qr() avoids a need to recompile the pattern every time a
match C</$pat/> is attempted. (Note that Perl has many other
internal optimizations, but none would be triggered in the above
example if we did not use qr() operator.)
Options are:
i Do case-insensitive pattern matching.
m Treat string as multiple lines.
o Compile pattern only once.
s Treat string as single line.
x Use extended regular expressions.
See L<perlre> for additional information on valid syntax for STRING, and
for a detailed look at the semantics of regular expressions.
=item qx/STRING/
=item `STRING`
A string which is (possibly) interpolated and then executed as a system
command with C</bin/sh> or its equivalent. Shell wildcards, pipes,
and redirections will be honored. The collected standard output of the
command is returned; standard error is unaffected. In scalar context,
it comes back as a single (potentially multi-line) string. In list
context, returns a list of lines (however you've defined lines with $/
or $INPUT_RECORD_SEPARATOR).
Because backticks do not affect standard error, use shell file descriptor
syntax (assuming the shell supports this) if you care to address this.
To capture a command's STDERR and STDOUT together:
$output = `cmd 2>&1`;
To capture a command's STDOUT but discard its STDERR:
$output = `cmd 2>/dev/null`;
To capture a command's STDERR but discard its STDOUT (ordering is
important here):
$output = `cmd 2>&1 1>/dev/null`;
To exchange a command's STDOUT and STDERR in order to capture the STDERR
but leave its STDOUT to come out the old STDERR:
$output = `cmd 3>&1 1>&2 2>&3 3>&-`;
To read both a command's STDOUT and its STDERR separately, it's easiest
and safest to redirect them separately to files, and then read from those
files when the program is done:
system("program args 1>/tmp/program.stdout 2>/tmp/program.stderr");
Using single-quote as a delimiter protects the command from Perl's
double-quote interpolation, passing it on to the shell instead:
$perl_info = qx(ps $$); # that's Perl's $$
$shell_info = qx'ps $$'; # that's the new shell's $$
Note that how the string gets evaluated is entirely subject to the command
interpreter on your system. On most platforms, you will have to protect
shell metacharacters if you want them treated literally. This is in
practice difficult to do, as it's unclear how to escape which characters.
See L<perlsec> for a clean and safe example of a manual fork() and exec()
to emulate backticks safely.
On some platforms (notably DOS-like ones), the shell may not be
capable of dealing with multiline commands, so putting newlines in
the string may not get you what you want. You may be able to evaluate
multiple commands in a single line by separating them with the command
separator character, if your shell supports that (e.g. C<;> on many Unix
shells; C<&> on the Windows NT C<cmd> shell).
Beware that some command shells may place restrictions on the length
of the command line. You must ensure your strings don't exceed this
limit after any necessary interpolations. See the platform-specific
release notes for more details about your particular environment.
Using this operator can lead to programs that are difficult to port,
because the shell commands called vary between systems, and may in
fact not be present at all. As one example, the C<type> command under
the POSIX shell is very different from the C<type> command under DOS.
That doesn't mean you should go out of your way to avoid backticks
when they're the right way to get something done. Perl was made to be
a glue language, and one of the things it glues together is commands.
Just understand what you're getting yourself into.
See L<"I/O Operators"> for more discussion.
=item qw/STRING/
Returns a list of the words extracted out of STRING, using embedded
whitespace as the word delimiters. It is exactly equivalent to
split(' ', q/STRING/);
This equivalency means that if used in scalar context, you'll get split's
(unfortunate) scalar context behavior, complete with mysterious warnings.
However do not rely on this as in a future release it could be changed to
be exactly equivalent to the list
('foo', 'bar', 'baz')
Which in a scalar context would result in C<'baz'>.
Some frequently seen examples:
use POSIX qw( setlocale localeconv )
@EXPORT = qw( foo bar baz );
A common mistake is to try to separate the words with comma or to put
comments into a multi-line C<qw>-string. For this reason the C<-w>
switch produce warnings if the STRING contains the "," or the "#"
character.
=item s/PATTERN/REPLACEMENT/egimosx
Searches a string for a pattern, and if found, replaces that pattern
with the replacement text and returns the number of substitutions
made. Otherwise it returns false (specifically, the empty string).
If no string is specified via the C<=~> or C<!~> operator, the C<$_>
variable is searched and modified. (The string specified with C<=~> must
be scalar variable, an array element, a hash element, or an assignment
to one of those, i.e., an lvalue.)
If the delimiter chosen is a single quote, no variable interpolation is
done on either the PATTERN or the REPLACEMENT. Otherwise, if the
PATTERN contains a $ that looks like a variable rather than an
end-of-string test, the variable will be interpolated into the pattern
at run-time. If you want the pattern compiled only once the first time
the variable is interpolated, use the C</o> option. If the pattern
evaluates to the empty string, the last successfully executed regular
expression is used instead. See L<perlre> for further explanation on these.
See L<perllocale> for discussion of additional considerations that apply
when C<use locale> is in effect.
Options are:
e Evaluate the right side as an expression.
g Replace globally, i.e., all occurrences.
i Do case-insensitive pattern matching.
m Treat string as multiple lines.
o Compile pattern only once.
s Treat string as single line.
x Use extended regular expressions.
Any non-alphanumeric, non-whitespace delimiter may replace the
slashes. If single quotes are used, no interpretation is done on the
replacement string (the C</e> modifier overrides this, however). Unlike
Perl 4, Perl 5 treats backticks as normal delimiters; the replacement
text is not evaluated as a command. If the
PATTERN is delimited by bracketing quotes, the REPLACEMENT has its own
pair of quotes, which may or may not be bracketing quotes, e.g.,
C<s(foo)(bar)> or C<sE<lt>fooE<gt>/bar/>. A C</e> will cause the
replacement portion to be interpreted as a full-fledged Perl expression
and eval()ed right then and there. It is, however, syntax checked at
compile-time.
Examples:
s/\bgreen\b/mauve/g; # don't change wintergreen
$path =~ s|/usr/bin|/usr/local/bin|;
s/Login: $foo/Login: $bar/; # run-time pattern
($foo = $bar) =~ s/this/that/; # copy first, then change
$count = ($paragraph =~ s/Mister\b/Mr./g); # get change-count
$_ = 'abc123xyz';
s/\d+/$&*2/e; # yields 'abc246xyz'
s/\d+/sprintf("%5d",$&)/e; # yields 'abc 246xyz'
s/\w/$& x 2/eg; # yields 'aabbcc 224466xxyyzz'
s/%(.)/$percent{$1}/g; # change percent escapes; no /e
s/%(.)/$percent{$1} || $&/ge; # expr now, so /e
s/^=(\w+)/&pod($1)/ge; # use function call
# expand variables in $_, but dynamics only, using
# symbolic dereferencing
s/\$(\w+)/${$1}/g;
# /e's can even nest; this will expand
# any embedded scalar variable (including lexicals) in $_
s/(\$\w+)/$1/eeg;
# Delete (most) C comments.
$program =~ s {
/\* # Match the opening delimiter.
.*? # Match a minimal number of characters.
\*/ # Match the closing delimiter.
} []gsx;
s/^\s*(.*?)\s*$/$1/; # trim white space in $_, expensively
for ($variable) { # trim white space in $variable, cheap
s/^\s+//;
s/\s+$//;
}
s/([^ ]*) *([^ ]*)/$2 $1/; # reverse 1st two fields
Note the use of $ instead of \ in the last example. Unlike
B<sed>, we use the \E<lt>I<digit>E<gt> form in only the left hand side.
Anywhere else it's $E<lt>I<digit>E<gt>.
Occasionally, you can't use just a C</g> to get all the changes
to occur. Here are two common cases:
# put commas in the right places in an integer
1 while s/(.*\d)(\d\d\d)/$1,$2/g; # perl4
1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/g; # perl5
# expand tabs to 8-column spacing
1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e;
=item tr/SEARCHLIST/REPLACEMENTLIST/cds
=item y/SEARCHLIST/REPLACEMENTLIST/cds
Transliterates all occurrences of the characters found in the search list
with the corresponding character in the replacement list. It returns
the number of characters replaced or deleted. If no string is
specified via the =~ or !~ operator, the $_ string is transliterated. (The
string specified with =~ must be a scalar variable, an array element, a
hash element, or an assignment to one of those, i.e., an lvalue.)
A character range may be specified with a hyphen, so C<tr/A-J/0-9/>
does the same replacement as C<tr/ACEGIBDFHJ/0246813579/>.
For B<sed> devotees, C<y> is provided as a synonym for C<tr>. If the
SEARCHLIST is delimited by bracketing quotes, the REPLACEMENTLIST has
its own pair of quotes, which may or may not be bracketing quotes,
e.g., C<tr[A-Z][a-z]> or C<tr(+\-*/)/ABCD/>.
Note also that the whole range idea is rather unportable between
character sets--and even within character sets they may cause results
you probably didn't expect. A sound principle is to use only ranges
that begin from and end at either alphabets of equal case (a-e, A-E),
or digits (0-4). Anything else is unsafe. If in doubt, spell out the
character sets in full.
Options:
c Complement the SEARCHLIST.
d Delete found but unreplaced characters.
s Squash duplicate replaced characters.
If the C</c> modifier is specified, the SEARCHLIST character set is
complemented. If the C</d> modifier is specified, any characters specified
by SEARCHLIST not found in REPLACEMENTLIST are deleted. (Note
that this is slightly more flexible than the behavior of some B<tr>
programs, which delete anything they find in the SEARCHLIST, period.)
If the C</s> modifier is specified, sequences of characters that were
transliterated to the same character are squashed down to a single instance of the
character.
If the C</d> modifier is used, the REPLACEMENTLIST is always interpreted
exactly as specified. Otherwise, if the REPLACEMENTLIST is shorter
than the SEARCHLIST, the final character is replicated till it is long
enough. If the REPLACEMENTLIST is empty, the SEARCHLIST is replicated.
This latter is useful for counting characters in a class or for
squashing character sequences in a class.
Examples:
$ARGV[1] =~ tr/A-Z/a-z/; # canonicalize to lower case
$cnt = tr/*/*/; # count the stars in $_
$cnt = $sky =~ tr/*/*/; # count the stars in $sky
$cnt = tr/0-9//; # count the digits in $_
tr/a-zA-Z//s; # bookkeeper -> bokeper
($HOST = $host) =~ tr/a-z/A-Z/;
tr/a-zA-Z/ /cs; # change non-alphas to single space
tr [\200-\377]
[\000-\177]; # delete 8th bit
If multiple transliterations are given for a character, only the first one is used:
tr/AAA/XYZ/
will transliterate any A to X.
Note that because the transliteration table is built at compile time, neither
the SEARCHLIST nor the REPLACEMENTLIST are subjected to double quote
interpolation. That means that if you want to use variables, you must use
an eval():
eval "tr/$oldlist/$newlist/";
die $@ if $@;
eval "tr/$oldlist/$newlist/, 1" or die $@;
=back
=head2 Gory details of parsing quoted constructs
When presented with something which may have several different
interpretations, Perl uses the principle B<DWIM> (expanded to Do What I Mean
- not what I wrote) to pick up the most probable interpretation of the
source. This strategy is so successful that Perl users usually do not
suspect ambivalence of what they write. However, time to time Perl's ideas
differ from what the author meant.
The target of this section is to clarify the Perl's way of interpreting
quoted constructs. The most frequent reason one may have to want to know the
details discussed in this section is hairy regular expressions. However, the
first steps of parsing are the same for all Perl quoting operators, so here
they are discussed together.
The most important detail of Perl parsing rules is the first one
discussed below; when processing a quoted construct, Perl I<first>
finds the end of the construct, then it interprets the contents of the
construct. If you understand this rule, you may skip the rest of this
section on the first reading. The other rules would
contradict user's expectations much less frequently than the first one.
Some of the passes discussed below are performed concurrently, but as
far as results are the same, we consider them one-by-one. For different
quoting constructs Perl performs different number of passes, from
one to five, but they are always performed in the same order.
=over
=item Finding the end
First pass is finding the end of the quoted construct, be it
a multichar delimiter
C<"\nEOF\n"> of C<<<EOF> construct, C</> which terminates C<qq/> construct,
C<]> which terminates C<qq[> construct, or C<E<gt>> which terminates a
fileglob started with C<<>.
When searching for one-char non-matching delimiter, such as C</>, combinations
C<\\> and C<\/> are skipped. When searching for one-char matching delimiter,
such as C<]>, combinations C<\\>, C<\]> and C<\[> are skipped, and
nested C<[>, C<]> are skipped as well. When searching for multichar delimiter
no skipping is performed.
For constructs with 3-part delimiters (C<s///> etc.) the search is
repeated once more.
During this search no attention is paid to the semantic of the construct,
thus:
"$hash{"$foo/$bar"}"
or:
m/
bar # NOT a comment, this slash / terminated m//!
/x
do not form legal quoted expressions, the quoted part ends on the first C<">
and C</>, and the rest happens to be a syntax error. Note that since the slash
which terminated C<m//> was followed by a C<SPACE>, the above is not C<m//x>,
but rather C<m//> with no 'x' switch. So the embedded C<#> is interpreted
as a literal C<#>.
=item Removal of backslashes before delimiters
During the second pass the text between the starting delimiter and
the ending delimiter is copied to a safe location, and the C<\> is
removed from combinations consisting of C<\> and delimiter(s) (both starting
and ending delimiter if they differ).
The removal does not happen for multi-char delimiters.
Note that the combination C<\\> is left as it was!
Starting from this step no information about the delimiter(s) is used in the
parsing.
=item Interpolation
Next step is interpolation in the obtained delimiter-independent text.
There are four different cases.
=over
=item C<<<'EOF'>, C<m''>, C<s'''>, C<tr///>, C<y///>
No interpolation is performed.
=item C<''>, C<q//>
The only interpolation is removal of C<\> from pairs C<\\>.
=item C<"">, C<``>, C<qq//>, C<qx//>, C<<file*globE<gt>>
C<\Q>, C<\U>, C<\u>, C<\L>, C<\l> (possibly paired with C<\E>) are converted
to corresponding Perl constructs, thus C<"$foo\Qbaz$bar"> is converted to :
$foo . (quotemeta("baz" . $bar));
Other combinations of C<\> with following chars are substituted with
appropriate expansions.
Let it be stressed that I<whatever is between C<\Q> and C<\E>> is interpolated
in the usual way. Say, C<"\Q\\E"> has no C<\E> inside: it has C<\Q>, C<\\>,
and C<E>, thus the result is the same as for C<"\\\\E">. Generally speaking,
having backslashes between C<\Q> and C<\E> may lead to counterintuitive
results. So, C<"\Q\t\E"> is converted to:
quotemeta("\t")
which is the same as C<"\\\t"> (since TAB is not alphanumerical). Note also
that:
$str = '\t';
return "\Q$str";
may be closer to the conjectural I<intention> of the writer of C<"\Q\t\E">.
Interpolated scalars and arrays are internally converted to the C<join> and
C<.> Perl operations, thus C<"$foo >>> '@arr'"> becomes:
$foo . " >>> '" . (join $", @arr) . "'";
All the operations in the above are performed simultaneously left-to-right.
Since the result of "\Q STRING \E" has all the metacharacters quoted
there is no way to insert a literal C<$> or C<@> inside a C<\Q\E> pair: if
protected by C<\> C<$> will be quoted to became "\\\$", if not, it is
interpreted as starting an interpolated scalar.
Note also that the interpolating code needs to make a decision on where the
interpolated scalar ends. For instance, whether C<"a $b -E<gt> {c}"> means:
"a " . $b . " -> {c}";
or:
"a " . $b -> {c};
I<Most of the time> the decision is to take the longest possible text which
does not include spaces between components and contains matching
braces/brackets. Since the outcome may be determined by I<voting> based
on heuristic estimators, the result I<is not strictly predictable>, but
is usually correct for the ambiguous cases.
=item C<?RE?>, C</RE/>, C<m/RE/>, C<s/RE/foo/>,
Processing of C<\Q>, C<\U>, C<\u>, C<\L>, C<\l> and interpolation happens
(almost) as with C<qq//> constructs, but I<the substitution of C<\> followed by
RE-special chars (including C<\>) is not performed>! Moreover,
inside C<(?{BLOCK})>, C<(?# comment )>, and C<#>-comment of
C<//x>-regular expressions no processing is performed at all.
This is the first step where presence of the C<//x> switch is relevant.
Interpolation has several quirks: C<$|>, C<$(> and C<$)> are not interpolated, and
constructs C<$var[SOMETHING]> are I<voted> (by several different estimators)
to be an array element or C<$var> followed by a RE alternative. This is
the place where the notation C<${arr[$bar]}> comes handy: C</${arr[0-9]}/>
is interpreted as an array element C<-9>, not as a regular expression from
variable C<$arr> followed by a digit, which is the interpretation of
C</$arr[0-9]/>. Since voting among different estimators may be performed,
the result I<is not predictable>.
It is on this step that C<\1> is converted to C<$1> in the replacement
text of C<s///>.
Note that absence of processing of C<\\> creates specific restrictions on the
post-processed text: if the delimiter is C</>, one cannot get the combination
C<\/> into the result of this step: C</> will finish the regular expression,
C<\/> will be stripped to C</> on the previous step, and C<\\/> will be left
as is. Since C</> is equivalent to C<\/> inside a regular expression, this
does not matter unless the delimiter is a special character for the RE engine,
as in C<s*foo*bar*>, C<m[foo]>, or C<?foo?>, or an alphanumeric char, as in:
m m ^ a \s* b mmx;
In the above RE, which is intentionally obfuscated for illustration, the
delimiter is C<m>, the modifier is C<mx>, and after backslash-removal the
RE is the same as for C<m/ ^ a s* b /mx>).
=back
This step is the last one for all the constructs except regular expressions,
which are processed further.
=item Interpolation of regular expressions
All the previous steps were performed during the compilation of Perl code,
this one happens in run time (though it may be optimized to be calculated
at compile time if appropriate). After all the preprocessing performed
above (and possibly after evaluation if catenation, joining, up/down-casing
and C<quotemeta()>ing are involved) the resulting I<string> is passed to RE
engine for compilation.
Whatever happens in the RE engine is better be discussed in L<perlre>,
but for the sake of continuity let us do it here.
This is another step where presence of the C<//x> switch is relevant.
The RE engine scans the string left-to-right, and converts it to a finite
automaton.
Backslashed chars are either substituted by corresponding literal
strings (as with C<\{>), or generate special nodes of the finite automaton
(as with C<\b>). Characters which are special to the RE engine (such as
C<|>) generate corresponding nodes or groups of nodes. C<(?#...)>
comments are ignored. All the rest is either converted to literal strings
to match, or is ignored (as is whitespace and C<#>-style comments if
C<//x> is present).
Note that the parsing of the construct C<[...]> is performed using
rather different rules than for the rest of the regular expression.
The terminator of this construct is found using the same rules as for
finding a terminator of a C<{}>-delimited construct, the only exception
being that C<]> immediately following C<[> is considered as if preceded
by a backslash. Similarly, the terminator of C<(?{...})> is found using
the same rules as for finding a terminator of a C<{}>-delimited construct.
It is possible to inspect both the string given to RE engine, and the
resulting finite automaton. See arguments C<debug>/C<debugcolor>
of C<use L<re>> directive, and/or B<-Dr> option of Perl in
L<perlrun/Switches>.
=item Optimization of regular expressions
This step is listed for completeness only. Since it does not change
semantics, details of this step are not documented and are subject
to change. This step is performed over the finite automaton generated
during the previous pass.
However, in older versions of Perl C<L<split>> used to silently
optimize C</^/> to mean C</^/m>. This behaviour, though present
in current versions of Perl, may be deprecated in future.
=back
=head2 I/O Operators
There are several I/O operators you should know about.
A string enclosed by backticks (grave accents) first undergoes
variable substitution just like a double quoted string. It is then
interpreted as a command, and the output of that command is the value
of the pseudo-literal, like in a shell. In scalar context, a single
string consisting of all the output is returned. In list context,
a list of values is returned, one for each line of output. (You can
set C<$/> to use a different line terminator.) The command is executed
each time the pseudo-literal is evaluated. The status value of the
command is returned in C<$?> (see L<perlvar> for the interpretation
of C<$?>). Unlike in B<csh>, no translation is done on the return
data--newlines remain newlines. Unlike in any of the shells, single
quotes do not hide variable names in the command from interpretation.
To pass a $ through to the shell you need to hide it with a backslash.
The generalized form of backticks is C<qx//>. (Because backticks
always undergo shell expansion as well, see L<perlsec> for
security concerns.)
In a scalar context, evaluating a filehandle in angle brackets yields the
next line from that file (newline, if any, included), or C<undef> at
end-of-file. When C<$/> is set to C<undef> (i.e. file slurp mode),
and the file is empty, it returns C<''> the first time, followed by
C<undef> subsequently.
Ordinarily you must assign the returned value to a variable, but there is one
situation where an automatic assignment happens. I<If and ONLY if> the
input symbol is the only thing inside the conditional of a C<while> or
C<for(;;)> loop, the value is automatically assigned to the variable
C<$_>. In these loop constructs, the assigned value (whether assignment
is automatic or explicit) is then tested to see if it is defined.
The defined test avoids problems where line has a string value
that would be treated as false by perl e.g. "" or "0" with no trailing
newline. (This may seem like an odd thing to you, but you'll use the
construct in almost every Perl script you write.) Anyway, the following
lines are equivalent to each other:
while (defined($_ = <STDIN>)) { print; }
while ($_ = <STDIN>) { print; }
while (<STDIN>) { print; }
for (;<STDIN>;) { print; }
print while defined($_ = <STDIN>);
print while ($_ = <STDIN>);
print while <STDIN>;
and this also behaves similarly, but avoids the use of $_ :
while (my $line = <STDIN>) { print $line }
If you really mean such values to terminate the loop they should be
tested for explicitly:
while (($_ = <STDIN>) ne '0') { ... }
while (<STDIN>) { last unless $_; ... }
In other boolean contexts, C<E<lt>I<filehandle>E<gt>> without explicit C<defined>
test or comparison will solicit a warning if C<-w> is in effect.
The filehandles STDIN, STDOUT, and STDERR are predefined. (The
filehandles C<stdin>, C<stdout>, and C<stderr> will also work except in
packages, where they would be interpreted as local identifiers rather
than global.) Additional filehandles may be created with the open()
function. See L<perlfunc/open> for details on this.
If a E<lt>FILEHANDLEE<gt> is used in a context that is looking for a list, a
list consisting of all the input lines is returned, one line per list
element. It's easy to make a I<LARGE> data space this way, so use with
care.
E<lt>FILEHANDLEE<gt> may also be spelt readline(FILEHANDLE). See
L<perlfunc/readline>.
The null filehandle E<lt>E<gt> is special and can be used to emulate the
behavior of B<sed> and B<awk>. Input from E<lt>E<gt> comes either from
standard input, or from each file listed on the command line. Here's
how it works: the first time E<lt>E<gt> is evaluated, the @ARGV array is
checked, and if it is empty, C<$ARGV[0]> is set to "-", which when opened
gives you standard input. The @ARGV array is then processed as a list
of filenames. The loop
while (<>) {
... # code for each line
}
is equivalent to the following Perl-like pseudo code:
unshift(@ARGV, '-') unless @ARGV;
while ($ARGV = shift) {
open(ARGV, $ARGV);
while (<ARGV>) {
... # code for each line
}
}
except that it isn't so cumbersome to say, and will actually work. It
really does shift array @ARGV and put the current filename into variable
$ARGV. It also uses filehandle I<ARGV> internally--E<lt>E<gt> is just a
synonym for E<lt>ARGVE<gt>, which is magical. (The pseudo code above
doesn't work because it treats E<lt>ARGVE<gt> as non-magical.)
You can modify @ARGV before the first E<lt>E<gt> as long as the array ends up
containing the list of filenames you really want. Line numbers (C<$.>)
continue as if the input were one big happy file. (But see example
under C<eof> for how to reset line numbers on each file.)
If you want to set @ARGV to your own list of files, go right ahead.
This sets @ARGV to all plain text files if no @ARGV was given:
@ARGV = grep { -f && -T } glob('*') unless @ARGV;
You can even set them to pipe commands. For example, this automatically
filters compressed arguments through B<gzip>:
@ARGV = map { /\.(gz|Z)$/ ? "gzip -dc < $_ |" : $_ } @ARGV;
If you want to pass switches into your script, you can use one of the
Getopts modules or put a loop on the front like this:
while ($_ = $ARGV[0], /^-/) {
shift;
last if /^--$/;
if (/^-D(.*)/) { $debug = $1 }
if (/^-v/) { $verbose++ }
# ... # other switches
}
while (<>) {
# ... # code for each line
}
The E<lt>E<gt> symbol will return C<undef> for end-of-file only once.
If you call it again after this it will assume you are processing another
@ARGV list, and if you haven't set @ARGV, will input from STDIN.
If the string inside the angle brackets is a reference to a scalar
variable (e.g., E<lt>$fooE<gt>), then that variable contains the name of the
filehandle to input from, or its typeglob, or a reference to the same. For example:
$fh = \*STDIN;
$line = <$fh>;
If what's within the angle brackets is neither a filehandle nor a simple
scalar variable containing a filehandle name, typeglob, or typeglob
reference, it is interpreted as a filename pattern to be globbed, and
either a list of filenames or the next filename in the list is returned,
depending on context. This distinction is determined on syntactic
grounds alone. That means C<E<lt>$xE<gt>> is always a readline from
an indirect handle, but C<E<lt>$hash{key}E<gt>> is always a glob.
That's because $x is a simple scalar variable, but C<$hash{key}> is
not--it's a hash element.
One level of double-quote interpretation is done first, but you can't
say C<E<lt>$fooE<gt>> because that's an indirect filehandle as explained
in the previous paragraph. (In older versions of Perl, programmers
would insert curly brackets to force interpretation as a filename glob:
C<E<lt>${foo}E<gt>>. These days, it's considered cleaner to call the
internal function directly as C<glob($foo)>, which is probably the right
way to have done it in the first place.) Example:
while (<*.c>) {
chmod 0644, $_;
}
is equivalent to
open(FOO, "echo *.c | tr -s ' \t\r\f' '\\012\\012\\012\\012'|");
while (<FOO>) {
chop;
chmod 0644, $_;
}
In fact, it's currently implemented that way. (Which means it will not
work on filenames with spaces in them unless you have csh(1) on your
machine.) Of course, the shortest way to do the above is:
chmod 0644, <*.c>;
Because globbing invokes a shell, it's often faster to call readdir() yourself
and do your own grep() on the filenames. Furthermore, due to its current
implementation of using a shell, the glob() routine may get "Arg list too
long" errors (unless you've installed tcsh(1L) as F</bin/csh>).
A glob evaluates its (embedded) argument only when it is starting a new
list. All values must be read before it will start over. In a list
context this isn't important, because you automatically get them all
anyway. In scalar context, however, the operator returns the next value
each time it is called, or a C<undef> value if you've just run out. As
for filehandles an automatic C<defined> is generated when the glob
occurs in the test part of a C<while> or C<for> - because legal glob returns
(e.g. a file called F<0>) would otherwise terminate the loop.
Again, C<undef> is returned only once. So if you're expecting a single value
from a glob, it is much better to say
($file) = <blurch*>;
than
$file = <blurch*>;
because the latter will alternate between returning a filename and
returning FALSE.
It you're trying to do variable interpolation, it's definitely better
to use the glob() function, because the older notation can cause people
to become confused with the indirect filehandle notation.
@files = glob("$dir/*.[ch]");
@files = glob($files[$i]);
=head2 Constant Folding
Like C, Perl does a certain amount of expression evaluation at
compile time, whenever it determines that all arguments to an
operator are static and have no side effects. In particular, string
concatenation happens at compile time between literals that don't do
variable substitution. Backslash interpretation also happens at
compile time. You can say
'Now is the time for all' . "\n" .
'good men to come to.'
and this all reduces to one string internally. Likewise, if
you say
foreach $file (@filenames) {
if (-s $file > 5 + 100 * 2**16) { }
}
the compiler will precompute the number that
expression represents so that the interpreter
won't have to.
=head2 Bitwise String Operators
Bitstrings of any size may be manipulated by the bitwise operators
(C<~ | & ^>).
If the operands to a binary bitwise op are strings of different sizes,
B<|> and B<^> ops will act as if the shorter operand had additional
zero bits on the right, while the B<&> op will act as if the longer
operand were truncated to the length of the shorter. Note that the
granularity for such extension or truncation is one or more I<bytes>.
# ASCII-based examples
print "j p \n" ^ " a h"; # prints "JAPH\n"
print "JA" | " ph\n"; # prints "japh\n"
print "japh\nJunk" & '_____'; # prints "JAPH\n";
print 'p N$' ^ " E<H\n"; # prints "Perl\n";
If you are intending to manipulate bitstrings, you should be certain that
you're supplying bitstrings: If an operand is a number, that will imply
a B<numeric> bitwise operation. You may explicitly show which type of
operation you intend by using C<""> or C<0+>, as in the examples below.
$foo = 150 | 105 ; # yields 255 (0x96 | 0x69 is 0xFF)
$foo = '150' | 105 ; # yields 255
$foo = 150 | '105'; # yields 255
$foo = '150' | '105'; # yields string '155' (under ASCII)
$baz = 0+$foo & 0+$bar; # both ops explicitly numeric
$biz = "$foo" ^ "$bar"; # both ops explicitly stringy
See L<perlfunc/vec> for information on how to manipulate individual bits
in a bit vector.
=head2 Integer Arithmetic
By default Perl assumes that it must do most of its arithmetic in
floating point. But by saying
use integer;
you may tell the compiler that it's okay to use integer operations
from here to the end of the enclosing BLOCK. An inner BLOCK may
countermand this by saying
no integer;
which lasts until the end of that BLOCK.
The bitwise operators ("&", "|", "^", "~", "<<", and ">>") always
produce integral results. (But see also L<Bitwise String Operators>.)
However, C<use integer> still has meaning
for them. By default, their results are interpreted as unsigned
integers. However, if C<use integer> is in effect, their results are
interpreted as signed integers. For example, C<~0> usually evaluates
to a large integral value. However, C<use integer; ~0> is -1 on twos-complement machines.
=head2 Floating-point Arithmetic
While C<use integer> provides integer-only arithmetic, there is no
similar ways to provide rounding or truncation at a certain number of
decimal places. For rounding to a certain number of digits, sprintf()
or printf() is usually the easiest route.
Floating-point numbers are only approximations to what a mathematician
would call real numbers. There are infinitely more reals than floats,
so some corners must be cut. For example:
printf "%.20g\n", 123456789123456789;
# produces 123456789123456784
Testing for exact equality of floating-point equality or inequality is
not a good idea. Here's a (relatively expensive) work-around to compare
whether two floating-point numbers are equal to a particular number of
decimal places. See Knuth, volume II, for a more robust treatment of
this topic.
sub fp_equal {
my ($X, $Y, $POINTS) = @_;
my ($tX, $tY);
$tX = sprintf("%.${POINTS}g", $X);
$tY = sprintf("%.${POINTS}g", $Y);
return $tX eq $tY;
}
The POSIX module (part of the standard perl distribution) implements
ceil(), floor(), and a number of other mathematical and trigonometric
functions. The Math::Complex module (part of the standard perl
distribution) defines a number of mathematical functions that can also
work on real numbers. Math::Complex not as efficient as POSIX, but
POSIX can't work with complex numbers.
Rounding in financial applications can have serious implications, and
the rounding method used should be specified precisely. In these
cases, it probably pays not to trust whichever system rounding is
being used by Perl, but to instead implement the rounding function you
need yourself.
=head2 Bigger Numbers
The standard Math::BigInt and Math::BigFloat modules provide
variable precision arithmetic and overloaded operators.
At the cost of some space and considerable speed, they
avoid the normal pitfalls associated with limited-precision
representations.
use Math::BigInt;
$x = Math::BigInt->new('123456789123456789');
print $x * $x;
# prints +15241578780673678515622620750190521