use 5.008005;
use ExtUtils::MakeMaker;
# See lib/ExtUtils/MakeMaker.pm for details of how to influence
# the contents of the Makefile that is written.
WriteMakefile(
NAME => 'Device::BCM2835',
VERSION_FROM => 'lib/Device/BCM2835.pm', # finds $VERSION
PREREQ_PM => {}, # e.g., Module::Name => 1.1
($] >= 5.005 ? ## Add these new keywords supported since 5.005
(ABSTRACT_FROM => 'lib/Device/BCM2835.pm', # retrieve abstract from module
AUTHOR => 'Mike McCauley <mikem@airspayce.com>') : ()),
LIBS => ['-L/usr/local/projects/bcm2835/src -lbcm2835 -lrt' ], # e.g., '-lm'
DEFINE => '', # e.g., '-DHAVE_SOMETHING'
INC => '-I/usr/local/projects/bcm2835/src', # e.g., '-I. -I/usr/include/other'
);
if (eval {require ExtUtils::Constant; 1}) {
# If you edit these definitions to change the constants used by this module,
# you will need to use the generated const-c.inc and const-xs.inc
# files to replace their "fallback" counterparts before distributing your
# changes.
my @names = (qw(BCM2835_BLOCK_SIZE BCM2835_CLOCK_BASE BCM2835_GPAFEN0
BCM2835_GPAFEN1 BCM2835_GPAREN0 BCM2835_GPAREN1 BCM2835_GPCLR0
BCM2835_GPCLR1 BCM2835_GPEDS0 BCM2835_GPEDS1 BCM2835_GPFEN0
BCM2835_GPFEN1 BCM2835_GPFSEL0 BCM2835_GPFSEL1 BCM2835_GPFSEL2
BCM2835_GPFSEL3 BCM2835_GPFSEL4 BCM2835_GPFSEL5 BCM2835_GPHEN0
BCM2835_GPHEN1 BCM2835_GPIO_BASE BCM2835_GPIO_PADS
BCM2835_GPIO_PWM BCM2835_GPLEN0 BCM2835_GPLEN1 BCM2835_GPLEV0
BCM2835_GPLEV1 BCM2835_GPPUD BCM2835_GPPUDCLK0
BCM2835_GPPUDCLK1 BCM2835_GPREN0 BCM2835_GPREN1 BCM2835_GPSET0
BCM2835_GPSET1 BCM2835_PADS_GPIO_0_27 BCM2835_PADS_GPIO_28_45
BCM2835_PADS_GPIO_46_53 BCM2835_PAD_DRIVE_10mA
BCM2835_PAD_DRIVE_12mA BCM2835_PAD_DRIVE_14mA
BCM2835_PAD_DRIVE_16mA BCM2835_PAD_DRIVE_2mA
BCM2835_PAD_DRIVE_4mA BCM2835_PAD_DRIVE_6mA
BCM2835_PAD_DRIVE_8mA BCM2835_PAD_HYSTERESIS_ENABLED
BCM2835_PAD_SLEW_RATE_UNLIMITED BCM2835_PAGE_SIZE
BCM2835_PERI_BASE BCM2835_PWM0_DATA BCM2835_PWM0_ENABLE
BCM2835_PWM0_MS_MODE BCM2835_PWM0_OFFSTATE BCM2835_PWM0_RANGE
BCM2835_PWM0_REPEATFF BCM2835_PWM0_REVPOLAR
BCM2835_PWM0_SERIAL BCM2835_PWM0_USEFIFO BCM2835_PWM1_DATA
BCM2835_PWM1_ENABLE BCM2835_PWM1_MS_MODE BCM2835_PWM1_OFFSTATE
BCM2835_PWM1_RANGE BCM2835_PWM1_REPEATFF BCM2835_PWM1_REVPOLAR
BCM2835_PWM1_SERIAL BCM2835_PWM1_USEFIFO BCM2835_PWMCLK_CNTL
BCM2835_PWMCLK_DIV BCM2835_PWM_CONTROL BCM2835_PWM_STATUS
BCM2835_SPI0_BASE BCM2835_SPI0_CLK BCM2835_SPI0_CS
BCM2835_SPI0_CS_ADCS BCM2835_SPI0_CS_CLEAR
BCM2835_SPI0_CS_CLEAR_RX BCM2835_SPI0_CS_CLEAR_TX
BCM2835_SPI0_CS_CPHA BCM2835_SPI0_CS_CPOL BCM2835_SPI0_CS_CS
BCM2835_SPI0_CS_CSPOL BCM2835_SPI0_CS_CSPOL0
BCM2835_SPI0_CS_CSPOL1 BCM2835_SPI0_CS_CSPOL2
BCM2835_SPI0_CS_DMAEN BCM2835_SPI0_CS_DMA_LEN
BCM2835_SPI0_CS_DONE BCM2835_SPI0_CS_INTD BCM2835_SPI0_CS_INTR
BCM2835_SPI0_CS_LEN BCM2835_SPI0_CS_LEN_LONG
BCM2835_SPI0_CS_LMONO BCM2835_SPI0_CS_REN BCM2835_SPI0_CS_RXD
BCM2835_SPI0_CS_RXF BCM2835_SPI0_CS_RXR BCM2835_SPI0_CS_TA
BCM2835_SPI0_CS_TE_EN BCM2835_SPI0_CS_TXD BCM2835_SPI0_DC
BCM2835_SPI0_DLEN BCM2835_SPI0_FIFO BCM2835_SPI0_LTOH HIGH
LOW
),
{name=>"BCM2835_GPIO_FSEL_ALT0", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_ALT1", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_ALT2", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_ALT3", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_ALT4", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_ALT5", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_INPT", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_MASK", macro=>"1"},
{name=>"BCM2835_GPIO_FSEL_OUTP", macro=>"1"},
{name=>"BCM2835_GPIO_PUD_DOWN", macro=>"1"},
{name=>"BCM2835_GPIO_PUD_OFF", macro=>"1"},
{name=>"BCM2835_GPIO_PUD_UP", macro=>"1"},
{name=>"BCM2835_PAD_GROUP_GPIO_0_27", macro=>"1"},
{name=>"BCM2835_PAD_GROUP_GPIO_28_45", macro=>"1"},
{name=>"BCM2835_PAD_GROUP_GPIO_46_53", macro=>"1"},
{name=>"BCM2835_SPI_BIT_ORDER_LSBFIRST", macro=>"1"},
{name=>"BCM2835_SPI_BIT_ORDER_MSBFIRST", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_1", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_1024", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_128", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_16", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_16384", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_2", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_2048", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_256", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_32", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_32768", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_4", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_4096", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_512", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_64", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_65536", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_8", macro=>"1"},
{name=>"BCM2835_SPI_CLOCK_DIVIDER_8192", macro=>"1"},
{name=>"BCM2835_SPI_CS0", macro=>"1"},
{name=>"BCM2835_SPI_CS1", macro=>"1"},
{name=>"BCM2835_SPI_CS2", macro=>"1"},
{name=>"BCM2835_SPI_CS_NONE", macro=>"1"},
{name=>"BCM2835_SPI_MODE0", macro=>"1"},
{name=>"BCM2835_SPI_MODE1", macro=>"1"},
{name=>"BCM2835_SPI_MODE2", macro=>"1"},
{name=>"BCM2835_SPI_MODE3", macro=>"1"},
{name=>"RPI_GPIO_P1_03", macro=>"1"},
{name=>"RPI_GPIO_P1_05", macro=>"1"},
{name=>"RPI_GPIO_P1_07", macro=>"1"},
{name=>"RPI_GPIO_P1_08", macro=>"1"},
{name=>"RPI_GPIO_P1_10", macro=>"1"},
{name=>"RPI_GPIO_P1_11", macro=>"1"},
{name=>"RPI_GPIO_P1_12", macro=>"1"},
{name=>"RPI_GPIO_P1_13", macro=>"1"},
{name=>"RPI_GPIO_P1_15", macro=>"1"},
{name=>"RPI_GPIO_P1_16", macro=>"1"},
{name=>"RPI_GPIO_P1_18", macro=>"1"},
{name=>"RPI_GPIO_P1_19", macro=>"1"},
{name=>"RPI_GPIO_P1_21", macro=>"1"},
{name=>"RPI_GPIO_P1_22", macro=>"1"},
{name=>"RPI_GPIO_P1_23", macro=>"1"},
{name=>"RPI_GPIO_P1_24", macro=>"1"},
{name=>"RPI_GPIO_P1_26", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_03", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_05", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_07", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_08", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_10", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_11", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_12", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_13", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_15", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_16", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_18", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_19", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_21", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_22", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_23", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_24", macro=>"1"},
{name=>"RPI_V2_GPIO_P1_26", macro=>"1"},
{name=>"RPI_V2_GPIO_P5_03", macro=>"1"},
{name=>"RPI_V2_GPIO_P5_04", macro=>"1"},
{name=>"RPI_V2_GPIO_P5_05", macro=>"1"},
{name=>"RPI_V2_GPIO_P5_06", macro=>"1"});
ExtUtils::Constant::WriteConstants(
NAME => 'Device::BCM2835',
NAMES => \@names,
DEFAULT_TYPE => 'IV',
C_FILE => 'const-c.inc',
XS_FILE => 'const-xs.inc',
);
}
else {
use File::Copy;
use File::Spec;
foreach my $file ('const-c.inc', 'const-xs.inc') {
my $fallback = File::Spec->catfile('fallback', $file);
copy ($fallback, $file) or die "Can't copy $fallback to $file: $!";
}
}