=encoding utf8
=for comment
Consistent formatting of this file is achieved with:
perl ./Porting/podtidy pod/perlrepository.pod
=head1 NAME
perlrepository - Using the Perl source repository
=head1 SYNOPSIS
All of Perl's source code is kept centrally in a Git repository at
I<perl5.git.perl.org>. The repository contains many Perl revisions from
Perl 1 onwards and all the revisions from Perforce, the version control
system we were using previously. This repository is accessible in
different ways.
The full repository takes up about 80MB of disk space. A check out of
the blead branch (that is, the main development branch, which contains
bleadperl, the development version of perl 5) takes up about 160MB of
disk space (including the repository). A build of bleadperl takes up
about 200MB (including the repository and the check out).
=head1 Getting access to the repository
=head2 Read access via the web
You may access the repository over the web. This allows you to browse
the tree, see recent commits, subscribe to RSS feeds for the changes,
search for particular commits and more. You may access it at:
http://perl5.git.perl.org/perl.git
A mirror of the repository is found at:
http://github.com/mirrors/perl
=head2 Read access via Git
You will need a copy of Git for your computer. You can fetch a copy of
the repository using the Git protocol (which uses port 9418):
% git clone git://perl5.git.perl.org/perl.git perl-git
This clones the repository and makes a local copy in the F<perl-git>
directory.
If your local network does not allow you to use port 9418, then you can
fetch a copy of the repository over HTTP (this is at least 4x slower):
% git clone http://perl5.git.perl.org/perl.git perl-http
This clones the repository and makes a local copy in the F<perl-http>
directory.
=head2 Write access to the repository
If you are a committer, then you can fetch a copy of the repository
that you can push back on with:
% git clone ssh://perl5.git.perl.org/perl.git perl-ssh
This clones the repository and makes a local copy in the F<perl-ssh>
directory.
If you cloned using the git protocol, which is faster than ssh, then
you will need to modify the URL for the origin remote to enable
pushing. To do that edit F<.git/config> with git-config(1) like this:
% git config remote.origin.url ssh://perl5.git.perl.org/perl.git
You can also set up your user name and e-mail address. Most people do
this once globally in their F<~/.gitconfig> by doing something like:
% git config --global user.name "Ævar Arnfjörð Bjarmason"
% git config --global user.email avarab@gmail.com
However if you'd like to override that just for perl then execute then
execute something like the following in F<perl-git>:
% git config user.email avar@cpan.org
It is also possible to keep C<origin> as a git remote, and add a new
remote for ssh access:
% git remote add camel perl5.git.perl.org:/perl.git
This allows you to update your local repository by pulling from
C<origin>, which is faster and doesn't require you to authenticate, and
to push your changes back with the C<camel> remote:
% git fetch camel
% git push camel
The C<fetch> command just updates the C<camel> refs, as the objects
themselves should have been fetched when pulling from C<origin>.
=head2 A note on camel and dromedary
The committers have SSH access to the two servers that serve
C<perl5.git.perl.org>. One is C<perl5.git.perl.org> itself (I<camel>),
which is the 'master' repository. The second one is
C<users.perl5.git.perl.org> (I<dromedary>), which can be used for
general testing and development. Dromedary syncs the git tree from
camel every few minutes, you should not push there. Both machines also
have a full CPAN mirror in /srv/CPAN, please use this. To share files
with the general public, dromedary serves your ~/public_html/ as
C<http://users.perl5.git.perl.org/~yourlogin/>
These hosts have fairly strict firewalls to the outside. Outgoing, only
rsync, ssh and git are allowed. For http and ftp, you can use
http://webproxy:3128 as proxy. Incoming, the firewall tries to detect
attacks and blocks IP addresses with suspicious activity. This
sometimes (but very rarely) has false positives and you might get
blocked. The quickest way to get unblocked is to notify the admins.
These two boxes are owned, hosted, and operated by booking.com. You can
reach the sysadmins in #p5p on irc.perl.org or via mail to
C<perl5-porters@perl.org>
=head1 Overview of the repository
Once you have changed into the repository directory, you can inspect
it.
After a clone the repository will contain a single local branch, which
will be the current branch as well, as indicated by the asterisk.
% git branch
* blead
Using the -a switch to C<branch> will also show the remote tracking
branches in the repository:
% git branch -a
* blead
origin/HEAD
origin/blead
...
The branches that begin with "origin" correspond to the "git remote"
that you cloned from (which is named "origin"). Each branch on the
remote will be exactly tracked by theses branches. You should NEVER do
work on these remote tracking branches. You only ever do work in a
local branch. Local branches can be configured to automerge (on pull)
from a designated remote tracking branch. This is the case with the
default branch C<blead> which will be configured to merge from the
remote tracking branch C<origin/blead>.
You can see recent commits:
% git log
And pull new changes from the repository, and update your local
repository (must be clean first)
% git pull
Assuming we are on the branch C<blead> immediately after a pull, this
command would be more or less equivalent to:
% git fetch
% git merge origin/blead
In fact if you want to update your local repository without touching
your working directory you do:
% git fetch
And if you want to update your remote-tracking branches for all defined
remotes simultaneously you can do
% git remote update
Neither of these last two commands will update your working directory,
however both will update the remote-tracking branches in your
repository.
To make a local branch of a remote branch:
% git checkout -b maint-5.10 origin/maint-5.10
To switch back to blead:
% git checkout blead
=head2 Finding out your status
The most common git command you will use will probably be
% git status
This command will produce as output a description of the current state
of the repository, including modified files and unignored untracked
files, and in addition it will show things like what files have been
staged for the next commit, and usually some useful information about
how to change things. For instance the following:
$ git status
# On branch blead
# Your branch is ahead of 'origin/blead' by 1 commit.
#
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
#
# modified: pod/perlrepository.pod
#
# Changed but not updated:
# (use "git add <file>..." to update what will be committed)
#
# modified: pod/perlrepository.pod
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# deliberate.untracked
This shows that there were changes to this document staged for commit,
and that there were further changes in the working directory not yet
staged. It also shows that there was an untracked file in the working
directory, and as you can see shows how to change all of this. It also
shows that there is one commit on the working branch C<blead> which has
not been pushed to the C<origin> remote yet. B<NOTE>: that this output
is also what you see as a template if you do not provide a message to
C<git commit>.
Assuming that you'd like to commit all the changes you've just made as
a a single atomic unit, run this command:
% git commit -a
(That C<-a> tells git to add every file you've changed to this commit.
New files aren't automatically added to your commit when you use
C<commit -a> If you want to add files or to commit some, but not all of
your changes, have a look at the documentation for C<git add>.)
Git will start up your favorite text editor, so that you can craft a
commit message for your change. See L</Commit message> below for more
information about what makes a good commit message.
Once you've finished writing your commit message and exited your
editor, git will write your change to disk and tell you something like
this:
Created commit daf8e63: explain git status and stuff about remotes
1 files changed, 83 insertions(+), 3 deletions(-)
If you re-run C<git status>, you should see something like this:
% git status
# On branch blead
# Your branch is ahead of 'origin/blead' by 2 commits.
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# deliberate.untracked
nothing added to commit but untracked files present (use "git add" to track)
When in doubt, before you do anything else, check your status and read
it carefully, many questions are answered directly by the git status
output.
=head1 Submitting a patch
If you have a patch in mind for Perl, you should first get a copy of
the repository:
% git clone git://perl5.git.perl.org/perl.git perl-git
Then change into the directory:
% cd perl-git
Alternatively, if you already have a Perl repository, you should ensure
that you're on the I<blead> branch, and your repository is up to date:
% git checkout blead
% git pull
It's preferable to patch against the latest blead version, since this
is where new development occurs for all changes other than critical bug
fixes. Critical bug fix patches should be made against the relevant
maint branches, or should be submitted with a note indicating all the
branches where the fix should be applied.
Now that we have everything up to date, we need to create a temporary
new branch for these changes and switch into it:
% git checkout -b orange
which is the short form of
% git branch orange
% git checkout orange
Creating a topic branch makes it easier for the maintainers to rebase
or merge back into the master blead for a more linear history. If you
don't work on a topic branch the maintainer has to manually cherry pick
your changes onto blead before they can be applied.
That'll get you scolded on perl5-porters, so don't do that. Be Awesome.
Then make your changes. For example, if Leon Brocard changes his name
to Orange Brocard, we should change his name in the AUTHORS file:
% perl -pi -e 's{Leon Brocard}{Orange Brocard}' AUTHORS
You can see what files are changed:
% git status
# On branch orange
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
#
# modified: AUTHORS
#
And you can see the changes:
% git diff
diff --git a/AUTHORS b/AUTHORS
index 293dd70..722c93e 100644
--- a/AUTHORS
+++ b/AUTHORS
@@ -541,7 +541,7 @@ Lars Hecking <lhecking@nmrc.ucc.ie>
Laszlo Molnar <laszlo.molnar@eth.ericsson.se>
Leif Huhn <leif@hale.dkstat.com>
Len Johnson <lenjay@ibm.net>
-Leon Brocard <acme@astray.com>
+Orange Brocard <acme@astray.com>
Les Peters <lpeters@aol.net>
Lesley Binks <lesley.binks@gmail.com>
Lincoln D. Stein <lstein@cshl.org>
For changes significant enough to warrant a F<pod/perldelta.pod> entry, the
porters would greatly appreciate it if you submit an entry along with your
actual change. Significant changes include, but are not limited to:
=over 4
=item *
adding, deprecating, or removing core features
=item *
adding, deprecating, removing, or upgrading core or dual-life modules
=item *
adding new core tests
=item *
fixing security issues and user-visible bugs in the core
=item *
changes that might break existing code, either on the perl or C level
=item *
significant performance improvements
=item *
adding, removing, or significantly changing documentation in the F<pod/>
directory
=item *
important platform-specific changes
=back
Please make sure you add the perldelta entry to the right section within
F<pod/perldelta.pod>. More information on how to write good perldelta entries is
available in the C<Style> section of F<Porting/how_to_write_a_perldelta.pod>.
Now commit your change locally:
% git commit -a -m 'Rename Leon Brocard to Orange Brocard'
Created commit 6196c1d: Rename Leon Brocard to Orange Brocard
1 files changed, 1 insertions(+), 1 deletions(-)
The C<-a> option is used to include all files that git tracks that you have
changed. If at this time, you only want to commit some of the files you have
worked on, you can omit the C<-a> and use the command C<S<git add I<FILE ...>>>
before doing the commit. C<S<git add --interactive>> allows you to even just
commit portions of files instead of all the changes in them.
The C<-m> option is used to specify the commit message. If you omit it, git
will open a text editor for you to compose the message interactively. This
is useful when the changes are more complex than the sample given here, and,
depending on the editor, to know that the first line of the commit message
doesn't exceed the 50 character legal maximum.
You can examine your last commit with:
% git show HEAD
and if you are not happy with either the description or the patch
itself you can fix it up by editing the files once more and then issue:
% git commit -a --amend
Now you should create a patch file for all your local changes:
% git format-patch -M origin..
0001-Rename-Leon-Brocard-to-Orange-Brocard.patch
You should now send an email to to
L<perlbug@perl.org|mailto:perlbug@perl.org> with a description of your
changes, and include this patch file as an attachment. In addition to
being tracked by RT, mail to perlbug will automatically be forwarded to
perl5-porters. You should only send patches to
L<perl5-porters@perl.org|mailto:perl5-porters@perl.org> directly if the
patch is not ready to be applied, but intended for discussion.
See the next section for how to configure and use git to send these
emails for you.
If you want to delete your temporary branch, you may do so with:
% git checkout blead
% git branch -d orange
error: The branch 'orange' is not an ancestor of your current HEAD.
If you are sure you want to delete it, run 'git branch -D orange'.
% git branch -D orange
Deleted branch orange.
=head2 Using git to send patch emails
In your ~/git/perl repository, set the destination email to perl's bug
tracker:
$ git config sendemail.to perlbug@perl.org
Or maybe perl5-porters (discussed above):
$ git config sendemail.to perl5-porters@perl.org
Then you can use git directly to send your patch emails:
$ git send-email 0001-Rename-Leon-Brocard-to-Orange-Brocard.patch
You may need to set some configuration variables for your particular
email service provider. For example, to set your global git config to
send email via a gmail account:
$ git config --global sendemail.smtpserver smtp.gmail.com
$ git config --global sendemail.smtpssl 1
$ git config --global sendemail.smtpuser YOURUSERNAME@gmail.com
With this configuration, you will be prompted for your gmail password
when you run 'git send-email'. You can also configure
C<sendemail.smtppass> with your password if you don't care about having
your password in the .gitconfig file.
=head2 A note on derived files
Be aware that many files in the distribution are derivative--avoid
patching them, because git won't see the changes to them, and the build
process will overwrite them. Patch the originals instead. Most
utilities (like perldoc) are in this category, i.e. patch
F<utils/perldoc.PL> rather than F<utils/perldoc>. Similarly, don't
create patches for files under $src_root/ext from their copies found in
$install_root/lib. If you are unsure about the proper location of a
file that may have gotten copied while building the source
distribution, consult the C<MANIFEST>.
=for XXX
What should we recommend about binary files now? Do we need anything?
=head2 Getting your patch accepted
If you are submitting a code patch there are several things that you
need to do.
=over 4
=item Commit message
As you craft each patch you intend to submit to the Perl core, it's
important to write a good commit message.
The first line of the commit message should be a short description and
should skip the full stop. It should be no longer than the subject line
of an E-Mail, 50 characters being a good rule of thumb.
A lot of Git tools (Gitweb, GitHub, git log --pretty=oneline, ..) will
only display the first line (cut off at 50 characters) when presenting
commit summaries.
The commit message should include description of the problem that the
patch corrects or new functionality that the patch adds.
As a general rule of thumb, your commit message should let a programmer
with a reasonable familiarity with the Perl core quickly understand
what you were trying to do, how you were trying to do it and why the
change matters to Perl.
=over 4
=item What
Your commit message should describe what part of the Perl core you're
changing and what you expect your patch to do.
=item Why
Perhaps most importantly, your commit message should describe why the
change you are making is important. When someone looks at your change
in six months or six years, your intent should be clear. If you're
deprecating a feature with the intent of later simplifying another bit
of code, say so. If you're fixing a performance problem or adding a new
feature to support some other bit of the core, mention that.
=item How
While it's not necessary for documentation changes, new tests or
trivial patches, it's often worth explaining how your change works.
Even if it's clear to you today, it may not be clear to a porter next
month or next year.
=back
A commit message isn't intended to take the place of comments in your
code. Commit messages should describe the change you made, while code
comments should describe the current state of the code. If you've just
implemented a new feature, complete with doc, tests and well-commented
code, a brief commit message will often suffice. If, however, you've
just changed a single character deep in the parser or lexer, you might
need to write a small novel to ensure that future readers understand
what you did and why you did it.
=item Comments, Comments, Comments
Be sure to adequately comment your code. While commenting every line
is unnecessary, anything that takes advantage of side effects of
operators, that creates changes that will be felt outside of the
function being patched, or that others may find confusing should be
documented. If you are going to err, it is better to err on the side
of adding too many comments than too few.
=item Style
In general, please follow the particular style of the code you are
patching.
In particular, follow these general guidelines for patching Perl
sources:
8-wide tabs (no exceptions!)
4-wide indents for code, 2-wide indents for nested CPP #defines
try hard not to exceed 79-columns
ANSI C prototypes
uncuddled elses and "K&R" style for indenting control constructs
no C++ style (//) comments
mark places that need to be revisited with XXX (and revisit often!)
opening brace lines up with "if" when conditional spans multiple
lines; should be at end-of-line otherwise
in function definitions, name starts in column 0 (return value is on
previous line)
single space after keywords that are followed by parens, no space
between function name and following paren
avoid assignments in conditionals, but if they're unavoidable, use
extra paren, e.g. "if (a && (b = c)) ..."
"return foo;" rather than "return(foo);"
"if (!foo) ..." rather than "if (foo == FALSE) ..." etc.
=item Testsuite
If your patch changes code (rather than just changing documentation)
you should also include one or more test cases which illustrate the bug
you're fixing or validate the new functionality you're adding. In
general, you should update an existing test file rather than create a
new one.
Your testsuite additions should generally follow these guidelines
(courtesy of Gurusamy Sarathy <gsar@activestate.com>):
Know what you're testing. Read the docs, and the source.
Tend to fail, not succeed.
Interpret results strictly.
Use unrelated features (this will flush out bizarre interactions).
Use non-standard idioms (otherwise you are not testing TIMTOWTDI).
Avoid using hardcoded test numbers whenever possible (the
EXPECTED/GOT found in t/op/tie.t is much more maintainable,
and gives better failure reports).
Give meaningful error messages when a test fails.
Avoid using qx// and system() unless you are testing for them. If you
do use them, make sure that you cover _all_ perl platforms.
Unlink any temporary files you create.
Promote unforeseen warnings to errors with $SIG{__WARN__}.
Be sure to use the libraries and modules shipped with the version
being tested, not those that were already installed.
Add comments to the code explaining what you are testing for.
Make updating the '1..42' string unnecessary. Or make sure that
you update it.
Test _all_ behaviors of a given operator, library, or function:
- All optional arguments
- Return values in various contexts (boolean, scalar, list, lvalue)
- Use both global and lexical variables
- Don't forget the exceptional, pathological cases.
=back
=head1 Accepting a patch
If you have received a patch file generated using the above section,
you should try out the patch.
First we need to create a temporary new branch for these changes and
switch into it:
% git checkout -b experimental
Patches that were formatted by C<git format-patch> are applied with
C<git am>:
% git am 0001-Rename-Leon-Brocard-to-Orange-Brocard.patch
Applying Rename Leon Brocard to Orange Brocard
If just a raw diff is provided, it is also possible use this two-step
process:
% git apply bugfix.diff
% git commit -a -m "Some fixing" --author="That Guy <that.guy@internets.com>"
Now we can inspect the change:
% git show HEAD
commit b1b3dab48344cff6de4087efca3dbd63548ab5e2
Author: Leon Brocard <acme@astray.com>
Date: Fri Dec 19 17:02:59 2008 +0000
Rename Leon Brocard to Orange Brocard
diff --git a/AUTHORS b/AUTHORS
index 293dd70..722c93e 100644
--- a/AUTHORS
+++ b/AUTHORS
@@ -541,7 +541,7 @@ Lars Hecking <lhecking@nmrc.ucc.ie>
Laszlo Molnar <laszlo.molnar@eth.ericsson.se>
Leif Huhn <leif@hale.dkstat.com>
Len Johnson <lenjay@ibm.net>
-Leon Brocard <acme@astray.com>
+Orange Brocard <acme@astray.com>
Les Peters <lpeters@aol.net>
Lesley Binks <lesley.binks@gmail.com>
Lincoln D. Stein <lstein@cshl.org>
If you are a committer to Perl and you think the patch is good, you can
then merge it into blead then push it out to the main repository:
% git checkout blead
% git merge experimental
% git push
If you want to delete your temporary branch, you may do so with:
% git checkout blead
% git branch -d experimental
error: The branch 'experimental' is not an ancestor of your current HEAD.
If you are sure you want to delete it, run 'git branch -D experimental'.
% git branch -D experimental
Deleted branch experimental.
=head1 Cleaning a working directory
The command C<git clean> can with varying arguments be used as a
replacement for C<make clean>.
To reset your working directory to a pristine condition you can do:
% git clean -dxf
However, be aware this will delete ALL untracked content. You can use
% git clean -Xf
to remove all ignored untracked files, such as build and test
byproduct, but leave any manually created files alone.
If you only want to cancel some uncommitted edits, you can use C<git
checkout> and give it a list of files to be reverted, or C<git checkout
-f> to revert them all.
If you want to cancel one or several commits, you can use C<git reset>.
=head1 Bisecting
C<git> provides a built-in way to determine, with a binary search in
the history, which commit should be blamed for introducing a given bug.
Suppose that we have a script F<~/testcase.pl> that exits with C<0>
when some behaviour is correct, and with C<1> when it's faulty. You
need an helper script that automates building C<perl> and running the
testcase:
% cat ~/run
#!/bin/sh
git clean -dxf
# If you get './makedepend: 1: Syntax error: Unterminated quoted
# string' when bisecting versions of perl older than 5.9.5 this hack
# will work around the bug in makedepend.SH which was fixed in
# version 96a8704c. Make sure to comment out `git checkout makedepend.SH'
# below too.
git show blead:makedepend.SH > makedepend.SH
# If you can use ccache, add -Dcc=ccache\ gcc -Dld=gcc to the Configure line
# if Encode is not needed for the test, you can speed up the bisect by
# excluding it from the runs with -Dnoextensions=Encode
sh Configure -des -Dusedevel -Doptimize="-g"
test -f config.sh || exit 125
# Correct makefile for newer GNU gcc
perl -ni -we 'print unless /<(?:built-in|command)/' makefile x2p/makefile
# if you just need miniperl, replace test_prep with miniperl
make test_prep
[ -x ./perl ] || exit 125
./perl -Ilib ~/testcase.pl
ret=$?
[ $ret -gt 127 ] && ret=127
# git checkout makedepend.SH
git clean -dxf
exit $ret
This script may return C<125> to indicate that the corresponding commit
should be skipped. Otherwise, it returns the status of
F<~/testcase.pl>.
You first enter in bisect mode with:
% git bisect start
For example, if the bug is present on C<HEAD> but wasn't in 5.10.0,
C<git> will learn about this when you enter:
% git bisect bad
% git bisect good perl-5.10.0
Bisecting: 853 revisions left to test after this
This results in checking out the median commit between C<HEAD> and
C<perl-5.10.0>. You can then run the bisecting process with:
% git bisect run ~/run
When the first bad commit is isolated, C<git bisect> will tell you so:
ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5 is first bad commit
commit ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5
Author: Dave Mitchell <davem@fdisolutions.com>
Date: Sat Feb 9 14:56:23 2008 +0000
[perl #49472] Attributes + Unknown Error
...
bisect run success
You can peek into the bisecting process with C<git bisect log> and
C<git bisect visualize>. C<git bisect reset> will get you out of bisect
mode.
Please note that the first C<good> state must be an ancestor of the
first C<bad> state. If you want to search for the commit that I<solved>
some bug, you have to negate your test case (i.e. exit with C<1> if OK
and C<0> if not) and still mark the lower bound as C<good> and the
upper as C<bad>. The "first bad commit" has then to be understood as
the "first commit where the bug is solved".
C<git help bisect> has much more information on how you can tweak your
binary searches.
=head1 Submitting a patch via GitHub
GitHub is a website that makes it easy to fork and publish projects
with Git. First you should set up a GitHub account and log in.
Perl's git repository is mirrored on GitHub at this page:
http://github.com/mirrors/perl/tree/blead
Visit the page and click the "fork" button. This clones the Perl git
repository for you and provides you with "Your Clone URL" from which
you should clone:
% git clone git@github.com:USERNAME/perl.git perl-github
The same patch as above, using github might look like this:
% cd perl-github
% git remote add upstream git://perl5.git.perl.org/perl.git
% git pull upstream blead
% git checkout -b orange
% perl -pi -e 's{Leon Brocard}{Orange Brocard}' AUTHORS
% git commit -a -m 'Rename Leon Brocard to Orange Brocard'
% git push origin orange
The orange branch has been pushed to GitHub, so you should now send an
email (see L</Submitting a patch>) with a description of your changes
and the following information:
http://github.com/USERNAME/perl/tree/orange
git://github.com/USERNAME/perl.git branch orange
=head1 Merging from a branch via GitHub
If someone has provided a branch via GitHub and you are a committer,
you should use the following in your perl-ssh directory:
% git remote add avar git://github.com/avar/perl.git
% git fetch avar
Now you can see the differences between the branch and blead:
% git diff avar/orange
And you can see the commits:
% git log avar/orange
If you approve of a specific commit, you can cherry pick it:
% git cherry-pick 0c24b290ae02b2ab3304f51d5e11e85eb3659eae
Or you could just merge the whole branch if you like it all:
% git merge avar/orange
And then push back to the repository:
% git push
=head1 Topic branches and rewriting history
Individual committers should create topic branches under
B<yourname>/B<some_descriptive_name>. Other committers should check
with a topic branch's creator before making any change to it.
The simplest way to create a remote topic branch that works on all
versions of git is to push the current head as a new branch on the
remote, then check it out locally:
$ branch="$yourname/$some_descriptive_name"
$ git push origin HEAD:$branch
$ git checkout -b $branch origin/$branch
Users of git 1.7 or newer can do it in a more obvious manner:
$ branch="$yourname/$some_descriptive_name"
$ git checkout -b $branch
$ git push origin -u $branch
If you are not the creator of B<yourname>/B<some_descriptive_name>, you
might sometimes find that the original author has edited the branch's
history. There are lots of good reasons for this. Sometimes, an author
might simply be rebasing the branch onto a newer source point.
Sometimes, an author might have found an error in an early commit which
they wanted to fix before merging the branch to blead.
Currently the master repository is configured to forbid
non-fast-forward merges. This means that the branches within can not
be rebased and pushed as a single step.
The only way you will ever be allowed to rebase or modify the history
of a pushed branch is to delete it and push it as a new branch under
the same name. Please think carefully about doing this. It may be
better to sequentially rename your branches so that it is easier for
others working with you to cherry-pick their local changes onto the new
version. (XXX: needs explanation).
If you want to rebase a personal topic branch, you will have to delete
your existing topic branch and push as a new version of it. You can do
this via the following formula (see the explanation about C<refspec>'s
in the git push documentation for details) after you have rebased your
branch:
# first rebase
$ git checkout $user/$topic
$ git fetch
$ git rebase origin/blead
# then "delete-and-push"
$ git push origin :$user/$topic
$ git push origin $user/$topic
B<NOTE:> it is forbidden at the repository level to delete any of the
"primary" branches. That is any branch matching
C<m!^(blead|maint|perl)!>. Any attempt to do so will result in git
producing an error like this:
$ git push origin :blead
*** It is forbidden to delete blead/maint branches in this repository
error: hooks/update exited with error code 1
error: hook declined to update refs/heads/blead
To ssh://perl5.git.perl.org/perl
! [remote rejected] blead (hook declined)
error: failed to push some refs to 'ssh://perl5.git.perl.org/perl'
As a matter of policy we do B<not> edit the history of the blead and
maint-* branches. If a typo (or worse) sneaks into a commit to blead or
maint-*, we'll fix it in another commit. The only types of updates
allowed on these branches are "fast-forward's", where all history is
preserved.
Annotated tags in the canonical perl.git repository will never be
deleted or modified. Think long and hard about whether you want to push
a local tag to perl.git before doing so. (Pushing unannotated tags is
not allowed.)
=head1 Committing to maintenance versions
Maintenance versions should only be altered to add critical bug fixes,
see L<perlpolicy>.
To commit to a maintenance version of perl, you need to create a local
tracking branch:
% git checkout --track -b maint-5.005 origin/maint-5.005
This creates a local branch named C<maint-5.005>, which tracks the
remote branch C<origin/maint-5.005>. Then you can pull, commit, merge
and push as before.
You can also cherry-pick commits from blead and another branch, by
using the C<git cherry-pick> command. It is recommended to use the
B<-x> option to C<git cherry-pick> in order to record the SHA1 of the
original commit in the new commit message.
=head1 Grafts
The perl history contains one mistake which was not caught in the
conversion: a merge was recorded in the history between blead and
maint-5.10 where no merge actually occurred. Due to the nature of git,
this is now impossible to fix in the public repository. You can remove
this mis-merge locally by adding the following line to your
C<.git/info/grafts> file:
296f12bbbbaa06de9be9d09d3dcf8f4528898a49 434946e0cb7a32589ed92d18008aaa1d88515930
It is particularly important to have this graft line if any bisecting
is done in the area of the "merge" in question.
=head1 SEE ALSO
=over
=item *
The git documentation, accessible via the C<git help> command
=item *
L<perlpolicy> - Perl core development policy
=back
=cut