/* perlio.h
*
* Copyright (C) 1996, 1997, 1999, 2000, 2001, 2002, 2003,
* by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
*
*/
#ifndef _PERLIO_H
#define _PERLIO_H
/*
Interface for perl to IO functions.
There is a hierachy of Configure determined #define controls:
USE_STDIO - forces PerlIO_xxx() to be #define-d onto stdio functions.
This is used for x2p subdirectory and for conservative
builds - "just like perl5.00X used to be".
This dominates over the others.
USE_PERLIO - The primary Configure variable that enables PerlIO.
If USE_PERLIO is _NOT_ set
then USE_STDIO above will be set to be conservative.
If USE_PERLIO is set
then there are two modes determined by USE_SFIO:
USE_SFIO - If set causes PerlIO_xxx() to be #define-d onto sfio functions.
A backward compatability mode for some specialist applications.
If USE_SFIO is not set then PerlIO_xxx() are real functions
defined in perlio.c which implement extra functionality
required for utf8 support.
One further note - the table-of-functions scheme controlled
by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can
#define PerlIO_xxx() to go via the function table, without having
to #undef them from (say) stdio forms.
*/
#if defined(PERL_IMPLICIT_SYS)
#ifndef USE_PERLIO
#ifndef NETWARE
/* # define USE_PERLIO */
#endif
#endif
#endif
#ifndef USE_PERLIO
# define USE_STDIO
#endif
#ifdef USE_STDIO
# ifndef PERLIO_IS_STDIO
# define PERLIO_IS_STDIO
# endif
#endif
/* -------------------- End of Configure controls ---------------------------- */
/*
* Although we may not want stdio to be used including <stdio.h> here
* avoids issues where stdio.h has strange side effects
*/
#include <stdio.h>
#ifdef __BEOS__
int fseeko(FILE *stream, off_t offset, int whence);
off_t ftello(FILE *stream);
#endif
#if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64)
#define ftell ftello
#endif
#if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64)
#define fseek fseeko
#endif
/* BS2000 includes are sometimes a bit non standard :-( */
#if defined(POSIX_BC) && defined(O_BINARY) && !defined(O_TEXT)
#undef O_BINARY
#endif
#ifdef PERLIO_IS_STDIO
/* #define PerlIO_xxxx() as equivalent stdio function */
#include "perlsdio.h"
#else /* PERLIO_IS_STDIO */
#ifdef USE_SFIO
/* #define PerlIO_xxxx() as equivalent sfio function */
#include "perlsfio.h"
#endif /* USE_SFIO */
#endif /* PERLIO_IS_STDIO */
#ifndef PerlIO
/* ----------- PerlIO implementation ---------- */
/* PerlIO not #define-d to something else - define the implementation */
typedef struct _PerlIO PerlIOl;
typedef struct _PerlIO_funcs PerlIO_funcs;
typedef PerlIOl *PerlIO;
#define PerlIO PerlIO
#define PERLIO_LAYERS 1
extern void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab);
extern PerlIO_funcs *PerlIO_find_layer(pTHX_ const char *name, STRLEN len,
int load);
extern PerlIO *PerlIO_push(pTHX_ PerlIO *f, PerlIO_funcs *tab,
const char *mode, SV *arg);
extern void PerlIO_pop(pTHX_ PerlIO *f);
extern AV* PerlIO_get_layers(pTHX_ PerlIO *f);
extern void PerlIO_clone(pTHX_ PerlInterpreter *proto, CLONE_PARAMS *param);
#endif /* PerlIO */
/* ----------- End of implementation choices ---------- */
#ifndef PERLIO_IS_STDIO
/* Not using stdio _directly_ as PerlIO */
/* We now need to determine what happens if source trys to use stdio.
* There are three cases based on PERLIO_NOT_STDIO which XS code
* can set how it wants.
*/
#ifdef PERL_CORE
/* Make a choice for perl core code
- currently this is set to try and catch lingering raw stdio calls.
This is a known issue with some non UNIX ports which still use
"native" stdio features.
*/
#ifndef PERLIO_NOT_STDIO
#define PERLIO_NOT_STDIO 1
#endif
#else
#ifndef PERLIO_NOT_STDIO
#define PERLIO_NOT_STDIO 0
#endif
#endif
#ifdef PERLIO_NOT_STDIO
#if PERLIO_NOT_STDIO
/*
* PERLIO_NOT_STDIO #define'd as 1
* Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors
*/
#include "nostdio.h"
#else /* if PERLIO_NOT_STDIO */
/*
* PERLIO_NOT_STDIO #define'd as 0
* Case 2: Declares that both PerlIO and stdio can be used
*/
#endif /* if PERLIO_NOT_STDIO */
#else /* ifdef PERLIO_NOT_STDIO */
/*
* PERLIO_NOT_STDIO not defined
* Case 3: Try and fake stdio calls as PerlIO calls
*/
#include "fakesdio.h"
#endif /* ifndef PERLIO_NOT_STDIO */
#endif /* PERLIO_IS_STDIO */
#define specialCopIO(sv) ((sv) == Nullsv)
/* ----------- fill in things that have not got #define'd ---------- */
#ifndef Fpos_t
#define Fpos_t Off_t
#endif
#ifndef EOF
#define EOF (-1)
#endif
/* This is to catch case with no stdio */
#ifndef BUFSIZ
#define BUFSIZ 1024
#endif
#ifndef SEEK_SET
#define SEEK_SET 0
#endif
#ifndef SEEK_CUR
#define SEEK_CUR 1
#endif
#ifndef SEEK_END
#define SEEK_END 2
#endif
#define PERLIO_DUP_CLONE 1
#define PERLIO_DUP_FD 2
/* --------------------- Now prototypes for functions --------------- */
START_EXTERN_C
#ifndef __attribute__format__
#ifdef CHECK_FORMAT
#define __attribute__format__(x,y,z) __attribute__((__format__(x,y,z)))
#else
#define __attribute__format__(x,y,z)
#endif
#endif
#ifndef NEXT30_NO_ATTRIBUTE
#ifndef HASATTRIBUTE /* disable GNU-cc attribute checking? */
#ifdef __attribute__ /* Avoid possible redefinition errors */
#undef __attribute__
#endif
#define __attribute__(attr)
#endif
#endif
#ifndef PerlIO_init
extern void PerlIO_init(pTHX);
#endif
#ifndef PerlIO_stdoutf
extern int PerlIO_stdoutf(const char *, ...)
__attribute__format__(__printf__, 1, 2);
#endif
#ifndef PerlIO_puts
extern int PerlIO_puts(PerlIO *, const char *);
#endif
#ifndef PerlIO_open
extern PerlIO *PerlIO_open(const char *, const char *);
#endif
#ifndef PerlIO_openn
extern PerlIO *PerlIO_openn(pTHX_ const char *layers, const char *mode,
int fd, int imode, int perm, PerlIO *old,
int narg, SV **arg);
#endif
#ifndef PerlIO_eof
extern int PerlIO_eof(PerlIO *);
#endif
#ifndef PerlIO_error
extern int PerlIO_error(PerlIO *);
#endif
#ifndef PerlIO_clearerr
extern void PerlIO_clearerr(PerlIO *);
#endif
#ifndef PerlIO_getc
extern int PerlIO_getc(PerlIO *);
#endif
#ifndef PerlIO_putc
extern int PerlIO_putc(PerlIO *, int);
#endif
#ifndef PerlIO_ungetc
extern int PerlIO_ungetc(PerlIO *, int);
#endif
#ifndef PerlIO_fdopen
extern PerlIO *PerlIO_fdopen(int, const char *);
#endif
#ifndef PerlIO_importFILE
extern PerlIO *PerlIO_importFILE(FILE *, const char *);
#endif
#ifndef PerlIO_exportFILE
extern FILE *PerlIO_exportFILE(PerlIO *, const char *);
#endif
#ifndef PerlIO_findFILE
extern FILE *PerlIO_findFILE(PerlIO *);
#endif
#ifndef PerlIO_releaseFILE
extern void PerlIO_releaseFILE(PerlIO *, FILE *);
#endif
#ifndef PerlIO_read
extern SSize_t PerlIO_read(PerlIO *, void *, Size_t);
#endif
#ifndef PerlIO_unread
extern SSize_t PerlIO_unread(PerlIO *, const void *, Size_t);
#endif
#ifndef PerlIO_write
extern SSize_t PerlIO_write(PerlIO *, const void *, Size_t);
#endif
#ifndef PerlIO_setlinebuf
extern void PerlIO_setlinebuf(PerlIO *);
#endif
#ifndef PerlIO_printf
extern int PerlIO_printf(PerlIO *, const char *, ...)
__attribute__format__(__printf__, 2, 3);
#endif
#ifndef PerlIO_sprintf
extern int PerlIO_sprintf(char *, int, const char *, ...)
__attribute__format__(__printf__, 3, 4);
#endif
#ifndef PerlIO_vprintf
extern int PerlIO_vprintf(PerlIO *, const char *, va_list);
#endif
#ifndef PerlIO_tell
extern Off_t PerlIO_tell(PerlIO *);
#endif
#ifndef PerlIO_seek
extern int PerlIO_seek(PerlIO *, Off_t, int);
#endif
#ifndef PerlIO_rewind
extern void PerlIO_rewind(PerlIO *);
#endif
#ifndef PerlIO_has_base
extern int PerlIO_has_base(PerlIO *);
#endif
#ifndef PerlIO_has_cntptr
extern int PerlIO_has_cntptr(PerlIO *);
#endif
#ifndef PerlIO_fast_gets
extern int PerlIO_fast_gets(PerlIO *);
#endif
#ifndef PerlIO_canset_cnt
extern int PerlIO_canset_cnt(PerlIO *);
#endif
#ifndef PerlIO_get_ptr
extern STDCHAR *PerlIO_get_ptr(PerlIO *);
#endif
#ifndef PerlIO_get_cnt
extern int PerlIO_get_cnt(PerlIO *);
#endif
#ifndef PerlIO_set_cnt
extern void PerlIO_set_cnt(PerlIO *, int);
#endif
#ifndef PerlIO_set_ptrcnt
extern void PerlIO_set_ptrcnt(PerlIO *, STDCHAR *, int);
#endif
#ifndef PerlIO_get_base
extern STDCHAR *PerlIO_get_base(PerlIO *);
#endif
#ifndef PerlIO_get_bufsiz
extern int PerlIO_get_bufsiz(PerlIO *);
#endif
#ifndef PerlIO_tmpfile
extern PerlIO *PerlIO_tmpfile(void);
#endif
#ifndef PerlIO_stdin
extern PerlIO *PerlIO_stdin(void);
#endif
#ifndef PerlIO_stdout
extern PerlIO *PerlIO_stdout(void);
#endif
#ifndef PerlIO_stderr
extern PerlIO *PerlIO_stderr(void);
#endif
#ifndef PerlIO_getpos
extern int PerlIO_getpos(PerlIO *, SV *);
#endif
#ifndef PerlIO_setpos
extern int PerlIO_setpos(PerlIO *, SV *);
#endif
#ifndef PerlIO_fdupopen
extern PerlIO *PerlIO_fdupopen(pTHX_ PerlIO *, CLONE_PARAMS *, int);
#endif
#if !defined(PerlIO_modestr) && !defined(PERLIO_IS_STDIO)
extern char *PerlIO_modestr(PerlIO *, char *buf);
#endif
#ifndef PerlIO_isutf8
extern int PerlIO_isutf8(PerlIO *);
#endif
#ifndef PerlIO_apply_layers
extern int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode,
const char *names);
#endif
#ifndef PerlIO_binmode
extern int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int omode,
const char *names);
#endif
#ifndef PerlIO_getname
extern char *PerlIO_getname(PerlIO *, char *);
#endif
extern void PerlIO_destruct(pTHX);
extern int PerlIO_intmode2str(int rawmode, char *mode, int *writing);
#ifdef PERLIO_LAYERS
extern void PerlIO_cleanup(pTHX);
extern void PerlIO_debug(const char *fmt, ...);
typedef struct PerlIO_list_s PerlIO_list_t;
#endif
END_EXTERN_C
#endif /* _PERLIO_H */