Info/RapidCity.pm - metacpan.org

# SNMP::Info::RapidCity
# $Id$
#
# Copyright (c) 2008 Eric Miller
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of the University of California, Santa Cruz nor the
#       names of its contributors may be used to endorse or promote products
#       derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

package SNMP::Info::RapidCity;

use strict;
use Exporter;
use SNMP::Info;

@SNMP::Info::RapidCity::ISA       = qw/SNMP::Info Exporter/;
@SNMP::Info::RapidCity::EXPORT_OK = qw//;

use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;

$VERSION = '3.18';

%MIBS = ( 'RAPID-CITY' => 'rapidCity', );

%GLOBALS = (
    'rc_serial'    => 'rcChasSerialNumber',
    'chassis'      => 'rcChasType',
    'slots'        => 'rcChasNumSlots',
    'tftp_host'    => 'rcTftpHost',
    'tftp_file'    => 'rcTftpFile',
    'tftp_action'  => 'rcTftpAction',
    'tftp_result'  => 'rcTftpResult',
    'rc_ch_rev'    => 'rcChasHardwareRevision',
    'rc_base_mac'  => 'rc2kChassisBaseMacAddr',
    'rc_virt_ip'   => 'rcSysVirtualIpAddr',
    'rc_virt_mask' => 'rcSysVirtualNetMask',
);

%FUNCS = (

    # From RAPID-CITY::rcPortTable
    'rc_index'        => 'rcPortIndex',
    'rc_duplex'       => 'rcPortOperDuplex',
    'rc_duplex_admin' => 'rcPortAdminDuplex',
    'rc_speed_admin'  => 'rcPortAdminSpeed',
    'rc_auto'         => 'rcPortAutoNegotiate',
    'rc_alias'        => 'rcPortName',

    # From RAPID-CITY::rc2kCpuEthernetPortTable
    'rc_cpu_ifindex'      => 'rc2kCpuEthernetPortIfIndex',
    'rc_cpu_admin'        => 'rc2kCpuEthernetPortAdminStatus',
    'rc_cpu_oper'         => 'rc2kCpuEthernetPortOperStatus',
    'rc_cpu_ip'           => 'rc2kCpuEthernetPortAddr',
    'rc_cpu_mask'         => 'rc2kCpuEthernetPortMask',
    'rc_cpu_auto'         => 'rc2kCpuEthernetPortAutoNegotiate',
    'rc_cpu_duplex_admin' => 'rc2kCpuEthernetPortAdminDuplex',
    'rc_cpu_duplex'       => 'rc2kCpuEthernetPortOperDuplex',
    'rc_cpu_speed_admin'  => 'rc2kCpuEthernetPortAdminSpeed',
    'rc_cpu_speed_oper'   => 'rc2kCpuEthernetPortOperSpeed',
    'rc_cpu_mac'          => 'rc2kCpuEthernetPortMgmtMacAddr',

    # From RAPID-CITY::rcVlanPortTable
    'rc_i_vlan_if'   => 'rcVlanPortIndex',
    'rc_i_vlan_num'  => 'rcVlanPortNumVlanIds',
    'rc_i_vlan'      => 'rcVlanPortVlanIds',
    'rc_i_vlan_type' => 'rcVlanPortType',
    'rc_i_vlan_pvid' => 'rcVlanPortDefaultVlanId',
    'rc_i_vlan_tag'  => 'rcVlanPortPerformTagging',

    # From RAPID-CITY::rcVlanTable
    'rc_vlan_id'      => 'rcVlanId',
    'v_name'          => 'rcVlanName',
    'rc_vlan_color'   => 'rcVlanColor',
    'rc_vlan_if'      => 'rcVlanIfIndex',
    'rc_vlan_stg'     => 'rcVlanStgId',
    'rc_vlan_type'    => 'rcVlanType',
    'rc_vlan_members' => 'rcVlanPortMembers',
    'rc_vlan_no_join' => 'rcVlanNotAllowToJoin',
    'rc_vlan_mac'     => 'rcVlanMacAddress',
    'rc_vlan_rstatus' => 'rcVlanRowStatus',

    # From RAPID-CITY::rcIpAddrTable
    'rc_ip_index' => 'rcIpAdEntIfIndex',
    'rc_ip_addr'  => 'rcIpAdEntAddr',
    'rc_ip_type'  => 'rcIpAdEntIfType',

    # From RAPID-CITY::rcChasFanTable
    'rc_fan_op' => 'rcChasFanOperStatus',

    # From RAPID-CITY::rcChasPowerSupplyTable
    'rc_ps_op' => 'rcChasPowerSupplyOperStatus',

    # From RAPID-CITY::rcChasPowerSupplyDetailTable
    'rc_ps_type'   => 'rcChasPowerSupplyDetailType',
    'rc_ps_serial' => 'rcChasPowerSupplyDetailSerialNumber',
    'rc_ps_rev'    => 'rcChasPowerSupplyDetailHardwareRevision',
    'rc_ps_part'   => 'rcChasPowerSupplyDetailPartNumber',
    'rc_ps_detail' => 'rcChasPowerSupplyDetailDescription',

    # From RAPID-CITY::rcCardTable
    'rc_c_type'   => 'rcCardType',
    'rc_c_serial' => 'rcCardSerialNumber',
    'rc_c_rev'    => 'rcCardHardwareRevision',
    'rc_c_part'   => 'rcCardPartNumber',

    # From RAPID-CITY::rc2kCardTable
    'rc2k_c_ftype'   => 'rc2kCardFrontType',
    'rc2k_c_fdesc'   => 'rc2kCardFrontDescription',
    'rc2k_c_fserial' => 'rc2kCardFrontSerialNum',
    'rc2k_c_frev'    => 'rc2kCardFrontHwVersion',
    'rc2k_c_fpart'   => 'rc2kCardFrontPartNumber',
    'rc2k_c_fdate'   => 'rc2kCardFrontDateCode',
    'rc2k_c_fdev'    => 'rc2kCardFrontDeviations',
    'rc2k_c_btype'   => 'rc2kCardBackType',
    'rc2k_c_bdesc'   => 'rc2kCardBackDescription',
    'rc2k_c_bserial' => 'rc2kCardBackSerialNum',
    'rc2k_c_brev'    => 'rc2kCardBackHwVersion',
    'rc2k_c_bpart'   => 'rc2kCardBackPartNumber',
    'rc2k_c_bdate'   => 'rc2kCardBackDateCode',
    'rc2k_c_bdev'    => 'rc2kCardBackDeviations',

    # From RAPID-CITY::rc2kMdaCardTable
    'rc2k_mda_type'   => 'rc2kMdaCardType',
    'rc2k_mda_desc'   => 'rc2kMdaCardDescription',
    'rc2k_mda_serial' => 'rc2kMdaCardSerialNum',
    'rc2k_mda_rev'    => 'rc2kMdaCardHwVersion',
    'rc2k_mda_part'   => 'rc2kMdaCardPartNumber',
    'rc2k_mda_date'   => 'rc2kMdaCardDateCode',
    'rc2k_mda_dev'    => 'rc2kMdaCardDeviations',
    
    # From RAPID-CITY::rcMltTable
    'rc_mlt_ports'    => 'rcMltPortMembers',
    'rc_mlt_index'    => 'rcMltIfIndex',
    'rc_mlt_dp'       => 'rcMltDesignatedPort',
);

%MUNGE = (
    'rc_base_mac'     => \&SNMP::Info::munge_mac,
    'rc_vlan_mac'     => \&SNMP::Info::munge_mac,
    'rc_cpu_mac'      => \&SNMP::Info::munge_mac,
    'rc_vlan_members' => \&SNMP::Info::munge_port_list,
    'rc_vlan_no_join' => \&SNMP::Info::munge_port_list,
    'rc_mlt_ports'    => \&SNMP::Info::munge_port_list,
);

# Need to override here since overridden in Layer2 and Layer3 classes
sub serial {
    my $rapidcity = shift;

    my $ver = $rapidcity->rc_serial();
    return $ver unless !defined $ver;

    return;
}

sub i_duplex {
    my $rapidcity = shift;
    my $partial   = shift;

    my $rc_duplex     = $rapidcity->rc_duplex($partial)     || {};
    my $rc_cpu_duplex = $rapidcity->rc_cpu_duplex($partial) || {};

    my %i_duplex;
    foreach my $if ( keys %$rc_duplex ) {
        my $duplex = $rc_duplex->{$if};
        next unless defined $duplex;

        $duplex = 'half' if $duplex =~ /half/i;
        $duplex = 'full' if $duplex =~ /full/i;
        $i_duplex{$if} = $duplex;
    }

    # Get CPU Ethernet Interfaces for 8600 Series
    foreach my $iid ( keys %$rc_cpu_duplex ) {
        my $c_duplex = $rc_cpu_duplex->{$iid};
        next unless defined $c_duplex;

        $i_duplex{$iid} = $c_duplex;
    }

    return \%i_duplex;
}

sub i_duplex_admin {
    my $rapidcity = shift;
    my $partial   = shift;

    my $rc_duplex_admin     = $rapidcity->rc_duplex_admin()             || {};
    my $rc_auto             = $rapidcity->rc_auto($partial)             || {};
    my $rc_cpu_auto         = $rapidcity->rc_cpu_auto($partial)         || {};
    my $rc_cpu_duplex_admin = $rapidcity->rc_cpu_duplex_admin($partial) || {};

    my %i_duplex_admin;
    foreach my $if ( keys %$rc_duplex_admin ) {
        my $duplex = $rc_duplex_admin->{$if};
        next unless defined $duplex;
        my $auto = $rc_auto->{$if} || 'false';

        my $string = 'other';
        $string = 'half' if ( $duplex =~ /half/i and $auto =~ /false/i );
        $string = 'full' if ( $duplex =~ /full/i and $auto =~ /false/i );
        $string = 'auto' if $auto =~ /true/i;

        $i_duplex_admin{$if} = $string;
    }

    # Get CPU Ethernet Interfaces for 8600 Series
    foreach my $iid ( keys %$rc_cpu_duplex_admin ) {
        my $c_duplex = $rc_cpu_duplex_admin->{$iid};
        next unless defined $c_duplex;
        my $c_auto = $rc_cpu_auto->{$iid};

        my $string = 'other';
        $string = 'half' if ( $c_duplex =~ /half/i and $c_auto =~ /false/i );
        $string = 'full' if ( $c_duplex =~ /full/i and $c_auto =~ /false/i );
        $string = 'auto' if $c_auto =~ /true/i;

        $i_duplex_admin{$iid} = $string;
    }

    return \%i_duplex_admin;
}

sub set_i_duplex_admin {
    my $rapidcity = shift;
    my ( $duplex, $iid ) = @_;

    $duplex = lc($duplex);
    return unless ( $duplex =~ /(half|full|auto)/ and $iid =~ /\d+/ );

    # map a textual duplex to an integer one the switch understands
    my %duplexes = qw/full 2 half 1/;
    my $i_auto   = $rapidcity->rc_auto($iid);

    if ( $duplex eq "auto" ) {
        return $rapidcity->set_rc_auto( '1', $iid );
    }
    elsif ( ( $duplex ne "auto" ) and ( $i_auto->{$iid} eq "1" ) ) {
        return unless ( $rapidcity->set_rc_auto( '2', $iid ) );
        return $rapidcity->set_rc_duplex_admin( $duplexes{$duplex}, $iid );
    }
    else {
        return $rapidcity->set_rc_duplex_admin( $duplexes{$duplex}, $iid );
    }
    return;
}

sub set_i_speed_admin {
    my $rapidcity = shift;
    my ( $speed, $iid ) = @_;

    return unless ( $speed =~ /(10|100|1000|auto)/i and $iid =~ /\d+/ );

    # map a textual duplex to an integer one the switch understands
    my %speeds = qw/10 1 100 2 1000 3/;
    my $i_auto = $rapidcity->rc_auto($iid);

    if ( $speed eq "auto" ) {
        return $rapidcity->set_rc_auto( '1', $iid );
    }
    elsif ( ( $speed ne "auto" ) and ( $i_auto->{$iid} eq "1" ) ) {
        return unless ( $rapidcity->set_rc_auto( '2', $iid ) );
        return $rapidcity->set_rc_speed_admin( $speeds{$speed}, $iid );
    }
    else {
        return $rapidcity->set_rc_speed_admin( $speeds{$speed}, $iid );
    }
    return;
}

sub v_index {
    my $rapidcity = shift;
    my $partial   = shift;

    return $rapidcity->rc_vlan_id($partial);
}

sub i_vlan {
    my $rapidcity = shift;
    my $partial   = shift;

    my $i_pvid = $rapidcity->rc_i_vlan_pvid($partial) || {};

    return $i_pvid;
}

sub i_vlan_membership {
    my $rapidcity = shift;

    my $rc_v_ports = $rapidcity->rc_vlan_members();

    my $i_vlan_membership = {};
    foreach my $vlan ( keys %$rc_v_ports ) {
        my $portlist = $rc_v_ports->{$vlan};
        my $ret      = [];

        # Convert portlist bit array to ifIndex array
        for ( my $i = 0; $i <= scalar(@$portlist); $i++ ) {
            push( @{$ret}, $i ) if ( @$portlist[$i] );
        }

        #Create HoA ifIndex -> VLAN array
        foreach my $port ( @{$ret} ) {
            push( @{ $i_vlan_membership->{$port} }, $vlan );
        }
    }
    return $i_vlan_membership;
}

sub set_i_pvid {
    my $rapidcity = shift;
    my ( $vlan_id, $ifindex ) = @_;

    return unless ( $rapidcity->_validate_vlan_param( $vlan_id, $ifindex ) );

    unless ( $rapidcity->set_rc_i_vlan_pvid( $vlan_id, $ifindex ) ) {
        $rapidcity->error_throw(
            "Unable to change PVID to $vlan_id on IfIndex: $ifindex");
        return;
    }
    return 1;
}

sub set_i_vlan {
    my $rapidcity = shift;
    my ( $new_vlan_id, $ifindex ) = @_;

    return
        unless ( $rapidcity->_validate_vlan_param( $new_vlan_id, $ifindex ) );

    my $vlan_p_type = $rapidcity->rc_i_vlan_type($ifindex);
    unless ( $vlan_p_type->{$ifindex} =~ /access/ ) {
        $rapidcity->error_throw("Not an access port");
        return;
    }

    my $i_pvid = $rapidcity->rc_i_vlan_pvid($ifindex);

    # Store current untagged VLAN to remove it from the port list later
    my $old_vlan_id = $i_pvid->{$ifindex};

    # Check that haven't been given the same VLAN we are currently using
    if ( $old_vlan_id eq $new_vlan_id ) {
        $rapidcity->error_throw(
            "Current PVID: $old_vlan_id and New VLAN: $new_vlan_id the same, no change."
        );
        return;
    }

    print "Changing VLAN: $old_vlan_id to $new_vlan_id on IfIndex: $ifindex\n"
        if $rapidcity->debug();

    # Check if port in forbidden list for the VLAN, haven't seen this used,
    # but we'll check anyway
    return
        unless (
        $rapidcity->_check_forbidden_ports( $new_vlan_id, $ifindex ) );

    my $old_vlan_members = $rapidcity->rc_vlan_members($old_vlan_id);
    my $new_vlan_members = $rapidcity->rc_vlan_members($new_vlan_id);

    print "Modifying egress list for VLAN: $new_vlan_id \n"
        if $rapidcity->debug();
    my $new_egress
        = $rapidcity->modify_port_list( $new_vlan_members->{$new_vlan_id},
        $ifindex, '1' );

    print "Modifying egress list for VLAN: $old_vlan_id \n"
        if $rapidcity->debug();
    my $old_egress
        = $rapidcity->modify_port_list( $old_vlan_members->{$old_vlan_id},
        $ifindex, '0' );

    my $vlan_set = [
        [ 'rc_vlan_members', "$new_vlan_id", "$new_egress" ],

        #        ['rc_vlan_members',"$old_vlan_id","$old_egress"],
    ];

    return
        unless ( $rapidcity->set_multi($vlan_set) );

    my $vlan_set2 = [ [ 'rc_vlan_members', "$old_vlan_id", "$old_egress" ], ];

    return
        unless ( $rapidcity->set_multi($vlan_set2) );

 # Set new untagged / native VLAN
 # Some models/versions do this for us also, so check to see if we need to set
    $i_pvid = $rapidcity->rc_i_vlan_pvid($ifindex);

    my $cur_i_pvid = $i_pvid->{$ifindex};
    print "Current PVID: $cur_i_pvid\n" if $rapidcity->debug();
    unless ( $cur_i_pvid eq $new_vlan_id ) {
        return unless ( $rapidcity->set_i_pvid( $new_vlan_id, $ifindex ) );
    }

    print
        "Successfully changed VLAN: $old_vlan_id to $new_vlan_id on IfIndex: $ifindex\n"
        if $rapidcity->debug();
    return 1;
}

sub set_add_i_vlan_tagged {
    my $rapidcity = shift;
    my ( $vlan_id, $ifindex ) = @_;

    return unless ( $rapidcity->_validate_vlan_param( $vlan_id, $ifindex ) );

    print "Adding VLAN: $vlan_id to IfIndex: $ifindex\n"
        if $rapidcity->debug();

# Check if port in forbidden list for the VLAN, haven't seen this used, but we'll check anyway
    return
        unless ( $rapidcity->_check_forbidden_ports( $vlan_id, $ifindex ) );

    my $iv_members = $rapidcity->rc_vlan_members($vlan_id);

    print "Modifying egress list for VLAN: $vlan_id \n"
        if $rapidcity->debug();
    my $new_egress
        = $rapidcity->modify_port_list( $iv_members->{$vlan_id}, $ifindex,
        '1' );

    unless ( $rapidcity->set_qb_v_egress( $new_egress, $vlan_id ) ) {
        print
            "Error: Unable to add VLAN: $vlan_id to Index: $ifindex egress list.\n"
            if $rapidcity->debug();
        return;
    }

    print
        "Successfully added IfIndex: $ifindex to VLAN: $vlan_id egress list\n"
        if $rapidcity->debug();
    return 1;
}

sub set_remove_i_vlan_tagged {
    my $rapidcity = shift;
    my ( $vlan_id, $ifindex ) = @_;

    return unless ( $rapidcity->_validate_vlan_param( $vlan_id, $ifindex ) );

    print "Removing VLAN: $vlan_id from IfIndex: $ifindex\n"
        if $rapidcity->debug();

    my $iv_members = $rapidcity->rc_vlan_members($vlan_id);

    print "Modifying egress list for VLAN: $vlan_id \n"
        if $rapidcity->debug();
    my $new_egress
        = $rapidcity->modify_port_list( $iv_members->{$vlan_id}, $ifindex,
        '0' );

    unless ( $rapidcity->set_qb_v_egress( $new_egress, $vlan_id ) ) {
        print
            "Error: Unable to add VLAN: $vlan_id to Index: $ifindex egress list.\n"
            if $rapidcity->debug();
        return;
    }

    print
        "Successfully removed IfIndex: $ifindex from VLAN: $vlan_id egress list\n"
        if $rapidcity->debug();
    return 1;
}

sub set_create_vlan {
    my $rapidcity = shift;
    my ( $name, $vlan_id ) = @_;
    return unless ( $vlan_id =~ /\d+/ );

    my $vlan_set = [
        [ 'v_name',          "$vlan_id", "$name" ],
        [ 'rc_vlan_rstatus', "$vlan_id", 4 ],
    ];

    unless ( $rapidcity->set_multi($vlan_set) ) {
        print "Error: Unable to create VLAN: $vlan_id\n"
            if $rapidcity->debug();
        return;
    }

    return 1;
}

sub set_delete_vlan {
    my $rapidcity = shift;
    my ($vlan_id) = shift;
    return unless ( $vlan_id =~ /^\d+$/ );

    unless ( $rapidcity->set_rc_vlan_rstatus( '6', $vlan_id ) ) {
        $rapidcity->error_throw("Unable to delete VLAN: $vlan_id");
        return;
    }
    return 1;
}

#
# These are internal methods and are not documented.  Do not use directly.
#
sub _check_forbidden_ports {
    my $rapidcity = shift;
    my ( $vlan_id, $ifindex ) = @_;

    my $iv_forbidden = $rapidcity->rc_vlan_no_join($vlan_id);

    my @forbidden_ports
        = split( //, unpack( "B*", $iv_forbidden->{$vlan_id} ) );
    print "Forbidden ports: @forbidden_ports\n" if $rapidcity->debug();
    if ( defined( $forbidden_ports[$ifindex] )
        and ( $forbidden_ports[$ifindex] eq "1" ) )
    {
        $rapidcity->error_throw(
            "IfIndex: $ifindex in forbidden list for VLAN: $vlan_id unable to add"
        );
        return;
    }
    return 1;
}

sub _validate_vlan_param {
    my $rapidcity = shift;
    my ( $vlan_id, $ifindex ) = @_;

    # VID and ifIndex should both be numeric
    unless (defined $vlan_id
        and defined $ifindex
        and $vlan_id =~ /^\d+$/
        and $ifindex =~ /^\d+$/ )
    {
        $rapidcity->error_throw("Invalid parameter");
        return;
    }

    # Check that ifIndex exists on device
    my $index = $rapidcity->interfaces($ifindex);

    unless ( exists $index->{$ifindex} ) {
        $rapidcity->error_throw("ifIndex $ifindex does not exist");
        return;
    }

    #Check that VLAN exists on device
    unless ( $rapidcity->rc_vlan_id($vlan_id) ) {
        $rapidcity->error_throw(
            "VLAN $vlan_id does not exist or is not operational");
        return;
    }

    return 1;
}

sub agg_ports {
    my $rapidcity = shift;

    # TODO: implement partial
    my $ports  = $rapidcity->rc_mlt_ports;
    my $trunks = $rapidcity->rc_mlt_index;
    my $dps    = $rapidcity->rc_mlt_dp || {};

    return {}
        unless ref {} eq ref $trunks
            and scalar keys %$trunks
            and ref {} eq ref $ports
            and scalar keys %$ports;

    my $ret = {};
    foreach my $m ( keys %$trunks ) {
        my $idx = $trunks->{$m};
        next unless $idx;
        $idx = $dps->{$m} ? $dps->{$m} : $idx;
        my $portlist = $ports->{$m};
        next unless $portlist;
        for ( my $i = 0; $i <= scalar(@$portlist); $i++ ) {
            $ret->{$i} = $idx if ( @$portlist[$i] );
        }
    }

    return $ret;
}

1;

__END__

=head1 NAME

SNMP::Info::RapidCity - SNMP Interface to the Avaya/Nortel RapidCity MIB

=head1 AUTHOR

Eric Miller

=head1 SYNOPSIS

 # Let SNMP::Info determine the correct subclass for you. 
 my $rapidcity = new SNMP::Info(
                        AutoSpecify => 1,
                        Debug       => 1,
                        # These arguments are passed directly to SNMP::Session
                        DestHost    => 'myswitch',
                        Community   => 'public',
                        Version     => 2
                        ) 
    or die "Can't connect to DestHost.\n";

 my $class = $rapidcity->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

=head1 DESCRIPTION

SNMP::Info::RapidCity is a subclass of SNMP::Info that provides an interface
to the C<RAPID-CITY> MIB.  This MIB is used across the Avaya/Nortel Ethernet
Routing Switch and Ethernet Switch product lines (Formerly known as Passport,
BayStack, and Accelar), as well as, the VSP 9000 and 7000 series.

Use or create in a subclass of SNMP::Info.  Do not use directly.

=head2 Inherited Classes

None.

=head2 Required MIBs

=over

=item RAPID-CITY

=back

=head1 GLOBAL METHODS

These are methods that return scalar values from SNMP

=over

=item  $rapidcity->rc_base_mac()

(C<rc2kChassisBaseMacAddr>)

=item  $rapidcity->rc_serial()

(C<rcChasSerialNumber>)

=item  $rapidcity->rc_ch_rev()

(C<rcChasHardwareRevision>)

=item  $rapidcity->chassis()

(C<rcChasType>)

=item  $rapidcity->slots()

(C<rcChasNumSlots>)

=item  $rapidcity->rc_virt_ip()

(C<rcSysVirtualIpAddr>)

=item  $rapidcity->rc_virt_mask()

(C<rcSysVirtualNetMask>)

=item  $rapidcity->tftp_host()

(C<rcTftpHost>)

=item  $rapidcity->tftp_file()

(C<rcTftpFile>)

=item  $rapidcity->tftp_action()

(C<rcTftpAction>)

=item  $rapidcity->tftp_result()

(C<rcTftpResult>)

=back

=head2 Overrides

=over

=item  $rapidcity->serial()

Returns serial number of the chassis

=back

=head1 TABLE METHODS

These are methods that return tables of information in the form of a reference
to a hash.

=over

=item $rapidcity->i_duplex()

Returns reference to map of IIDs to current link duplex.

=item $rapidcity->i_duplex_admin()

Returns reference to hash of IIDs to admin duplex setting.

=item $rapidcity->i_vlan()

Returns a mapping between C<ifIndex> and the PVID or default VLAN.

=item $rapidcity->i_vlan_membership()

Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
IDs.  These are the VLANs which are members of the egress list for the port.

  Example:
  my $interfaces = $rapidcity->interfaces();
  my $vlans      = $rapidcity->i_vlan_membership();
  
  foreach my $iid (sort keys %$interfaces) {
    my $port = $interfaces->{$iid};
    my $vlan = join(',', sort(@{$vlans->{$iid}}));
    print "Port: $port VLAN: $vlan\n";
  }

=item $rapidcity->v_index()

Returns VLAN IDs

(C<rcVlanId>)

=item $rapidcity->agg_ports()

Returns a HASH reference mapping from slave to master port for each member of
a port bundle (MLT) on the device. Keys are ifIndex of the slave ports,
Values are ifIndex of the corresponding master ports.

=back

=head2 RAPID-CITY Port Table (C<rcPortTable>)

=over

=item $rapidcity->rc_index()

(C<rcPortIndex>)

=item $rapidcity->rc_duplex()

(C<rcPortOperDuplex>)

=item $rapidcity->rc_duplex_admin()

(C<rcPortAdminDuplex>)

=item $rapidcity->rc_speed_admin()

(C<rcPortAdminSpeed>)

=item $rapidcity->rc_auto()

(C<rcPortAutoNegotiate>)

=item $rapidcity->rc_alias()

(C<rcPortName>)

=back

=head2 RAPID-CITY CPU Ethernet Port Table (C<rc2kCpuEthernetPortTable>)

=over

=item $rapidcity->rc_cpu_ifindex()

(C<rc2kCpuEthernetPortIfIndex>)

=item $rapidcity->rc_cpu_admin()

(C<rc2kCpuEthernetPortAdminStatus>)

=item $rapidcity->rc_cpu_oper()

(C<rc2kCpuEthernetPortOperStatus>)

=item $rapidcity->rc_cpu_ip()

(C<rc2kCpuEthernetPortAddr>)

=item $rapidcity->rc_cpu_mask()

(C<rc2kCpuEthernetPortMask>)

=item $rapidcity->rc_cpu_auto()

(C<rc2kCpuEthernetPortAutoNegotiate>)

=item $rapidcity->rc_cpu_duplex_admin()

(C<rc2kCpuEthernetPortAdminDuplex>)

=item $rapidcity->rc_cpu_duplex()

(C<rc2kCpuEthernetPortOperDuplex>)

=item $rapidcity->rc_cpu_speed_admin()

(C<rc2kCpuEthernetPortAdminSpeed>)

=item $rapidcity->rc_cpu_speed_oper()

(C<rc2kCpuEthernetPortOperSpeed>)

=item $rapidcity->rc_cpu_mac()

(C<rc2kCpuEthernetPortMgmtMacAddr>)

=back

=head2 RAPID-CITY VLAN Port Table (C<rcVlanPortTable>)

=over

=item $rapidcity->rc_i_vlan_if()

(C<rcVlanPortIndex>)

=item $rapidcity->rc_i_vlan_num()

(C<rcVlanPortNumVlanIds>)

=item $rapidcity->rc_i_vlan()

(C<rcVlanPortVlanIds>)

=item $rapidcity->rc_i_vlan_type()

(C<rcVlanPortType>)

=item $rapidcity->rc_i_vlan_pvid()

(C<rcVlanPortDefaultVlanId>)

=item $rapidcity->rc_i_vlan_tag()

(C<rcVlanPortPerformTagging>)

=back

=head2 RAPID-CITY VLAN Table (C<rcVlanTable>)

=over

=item $rapidcity->rc_vlan_id()

(C<rcVlanId>)

=item $rapidcity->v_name()

(C<rcVlanName>)

=item $rapidcity->rc_vlan_color()

(C<rcVlanColor>)

=item $rapidcity->rc_vlan_if()

(C<rcVlanIfIndex>)

=item $rapidcity->rc_vlan_stg()

(C<rcVlanStgId>)

=item $rapidcity->rc_vlan_type()

(C<rcVlanType>)

=item $rapidcity->rc_vlan_members()

(C<rcVlanPortMembers>)

=item $rapidcity->rc_vlan_mac()

(C<rcVlanMacAddress>)

=back

=head2 RAPID-CITY IP Address Table (C<rcIpAddrTable>)

=over

=item $rapidcity->rc_ip_index()

(C<rcIpAdEntIfIndex>)

=item $rapidcity->rc_ip_addr()

(C<rcIpAdEntAddr>)

=item $rapidcity->rc_ip_type()

(C<rcIpAdEntIfType>)

=back

=head2 RAPID-CITY Chassis Fan Table (C<rcChasFanTable>)

=over

=item $rapidcity->rc_fan_op()

(C<rcChasFanOperStatus>)

=back

=head2 RAPID-CITY Power Supply Table (C<rcChasPowerSupplyTable>)

=over

=item $rapidcity->rc_ps_op()

(C<rcChasPowerSupplyOperStatus>)

=back

=head2 RAPID-CITY Power Supply Detail Table (C<rcChasPowerSupplyDetailTable>)

=over

=item $rapidcity->rc_ps_type()

(C<rcChasPowerSupplyDetailType>)

=item $rapidcity->rc_ps_serial()

(C<rcChasPowerSupplyDetailSerialNumber>)

=item $rapidcity->rc_ps_rev()

(C<rcChasPowerSupplyDetailHardwareRevision>)

=item $rapidcity->rc_ps_part()

(C<rcChasPowerSupplyDetailPartNumber>)

=item $rapidcity->rc_ps_detail()

(C<rcChasPowerSupplyDetailDescription>)

=back

=head2 RAPID-CITY Card Table (C<rcCardTable>)

=over

=item $rapidcity->rc_c_type()

(C<rcCardType>)

=item $rapidcity->rc_c_serial()

(C<rcCardSerialNumber>)

=item $rapidcity->rc_c_rev()

(C<rcCardHardwareRevision>)

=item $rapidcity->rc_c_part()

(C<rcCardPartNumber>)

=back

=head2 RAPID-CITY 2k Card Table (C<rc2kCardTable>)

=over

=item $rapidcity->rc2k_c_ftype()

(C<rc2kCardFrontType>)

=item $rapidcity->rc2k_c_fdesc()

(C<rc2kCardFrontDescription>)

=item $rapidcity->rc2k_c_fserial()

(C<rc2kCardFrontSerialNum>)

=item $rapidcity->rc2k_c_frev()

(C<rc2kCardFrontHwVersion>)

=item $rapidcity->rc2k_c_fpart()

(C<rc2kCardFrontPartNumber>)

=item $rapidcity->rc2k_c_fdate()

(C<rc2kCardFrontDateCode>)

=item $rapidcity->rc2k_c_fdev()

(C<rc2kCardFrontDeviations>)

=item $rapidcity->rc2k_c_btype()

(C<rc2kCardBackType>)

=item $rapidcity->rc2k_c_bdesc()

(C<rc2kCardBackDescription>)

=item $rapidcity->rc2k_c_bserial()

(C<rc2kCardBackSerialNum>)

=item $rapidcity->rc2k_c_brev()

(C<rc2kCardBackHwVersion>)

=item $rapidcity->rc2k_c_bpart()

(C<rc2kCardBackPartNumber>)

=item $rapidcity->rc2k_c_bdate()

(C<rc2kCardBackDateCode>)

=item $rapidcity->rc2k_c_bdev()

(C<rc2kCardBackDeviations>)

=back

=head2 RAPID-CITY MDA Card Table (C<rc2kMdaCardTable>)

=over

=item $rapidcity->rc2k_mda_type()

(C<rc2kMdaCardType>)

=item $rapidcity->rc2k_mda_desc()

(C<rc2kMdaCardDescription>)

=item $rapidcity->rc2k_mda_serial()

(C<rc2kMdaCardSerialNum>)

=item $rapidcity->rc2k_mda_rev()

(C<rc2kMdaCardHwVersion>)

=item $rapidcity->rc2k_mda_part()

(C<rc2kMdaCardPartNumber>)

=item $rapidcity->rc2k_mda_date()

(C<rc2kMdaCardDateCode>)

=item $rapidcity->rc2k_mda_dev()

(C<rc2kMdaCardDeviations>)

=back

=head1 SET METHODS

These are methods that provide SNMP set functionality for overridden methods
or provide a simpler interface to complex set operations.  See
L<SNMP::Info/"SETTING DATA VIA SNMP"> for general information on set
operations. 

=over

=item $rapidcity->set_i_speed_admin(speed, ifIndex)

Sets port speed, must be supplied with speed and port C<ifIndex>.  Speed
choices are 'auto', '10', '100', '1000'.

 Example:
 my %if_map = reverse %{$rapidcity->interfaces()};
 $rapidcity->set_i_speed_admin('auto', $if_map{'1.1'}) 
    or die "Couldn't change port speed. ",$rapidcity->error(1);

=item $rapidcity->set_i_duplex_admin(duplex, ifIndex)

Sets port duplex, must be supplied with duplex and port C<ifIndex>.  Speed
choices are 'auto', 'half', 'full'.

  Example:
  my %if_map = reverse %{$rapidcity->interfaces()};
  $rapidcity->set_i_duplex_admin('auto', $if_map{'1.1'}) 
    or die "Couldn't change port duplex. ",$rapidcity->error(1);

=item $rapidcity->set_i_vlan(vlan, ifIndex)

Changes an access (untagged) port VLAN, must be supplied with the numeric
VLAN ID and port C<ifIndex>.  This method will modify the port's VLAN
membership and PVID (default VLAN).  This method should only be used on end
station (non-trunk) ports.

  Example:
  my %if_map = reverse %{$rapidcity->interfaces()};
  $rapidcity->set_i_vlan('2', $if_map{'1.1'}) 
    or die "Couldn't change port VLAN. ",$rapidcity->error(1);

=item $rapidcity->set_i_pvid(pvid, ifIndex)

Sets port PVID or default VLAN, must be supplied with the numeric VLAN ID and
port C<ifIndex>.  This method only changes the PVID, to modify an access
(untagged) port use set_i_vlan() instead.

  Example:
  my %if_map = reverse %{$rapidcity->interfaces()};
  $rapidcity->set_i_pvid('2', $if_map{'1.1'}) 
    or die "Couldn't change port PVID. ",$rapidcity->error(1);

=item $rapidcity->set_add_i_vlan_tagged(vlan, ifIndex)

Adds the port to the egress list of the VLAN, must be supplied with the
numeric VLAN ID and port C<ifIndex>.

  Example:
  my %if_map = reverse %{$rapidcity->interfaces()};
  $rapidcity->set_add_i_vlan_tagged('2', $if_map{'1.1'}) 
    or die "Couldn't add port to egress list. ",$rapidcity->error(1);

=item $rapidcity->set_remove_i_vlan_tagged(vlan, ifIndex)

Removes the port from the egress list of the VLAN, must be supplied with the
numeric VLAN ID and port C<ifIndex>.

  Example:
  my %if_map = reverse %{$rapidcity->interfaces()};
  $rapidcity->set_remove_i_vlan_tagged('2', $if_map{'1.1'}) 
    or die "Couldn't add port to egress list. ",$rapidcity->error(1);

=item $rapidcity->set_delete_vlan(vlan)

Deletes the specified VLAN from the device.

=item $rapidcity->set_create_vlan(name, vlan)

Creates the specified VLAN on the device.

Note:  This method only allows creation of Port type VLANs and does not allow
for the setting of the Spanning Tree Group (STG) which defaults to 1.   

=back

=cut
	Global
`s`	Focus search bar
`?`	Bring up this help dialog
	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)
	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse
	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)