# SNMP::Info::Layer2::Orinoco
# $Id$
#
# Copyright (c) 2008 Eric Miller
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of the University of California, Santa Cruz nor the
#       names of its contributors may be used to endorse or promote products
#       derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

package SNMP::Info::Layer2::Orinoco;

use strict;
use Exporter;
use SNMP::Info::IEEE802dot11;
use SNMP::Info::Layer2;

@SNMP::Info::Layer2::Orinoco::ISA
    = qw/SNMP::Info::IEEE802dot11 SNMP::Info::Layer2 Exporter/;
@SNMP::Info::Layer2::Orinoco::EXPORT_OK = qw//;

use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;

$VERSION = '3.19';

%MIBS = (
    %SNMP::Info::Layer2::MIBS,
    %SNMP::Info::IEEE802dot11::MIBS,

    #'ORiNOCO-MIB' => 'orinoco',
);

%GLOBALS
    = ( %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::IEEE802dot11::GLOBALS, );

%FUNCS = (
    %SNMP::Info::Layer2::FUNCS,
    %SNMP::Info::IEEE802dot11::FUNCS,

    # ORiNOCO-MIB:oriWirelessIfPropertiesTable
    #'ori_ssid'       => 'oriWirelessIfNetworkName',
    #'ori_channel'    => 'oriWirelessIfChannel',
    #'ori_closed_sys' => 'oriWirelessIfClosedSystem',
    # ORiNOCO-MIB:oriSystemInvMgmtComponentTable
);

%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::IEEE802dot11::MUNGE, );

sub os {
    return 'orinoco';
}

sub os_ver {
    my $orinoco = shift;

    my $descr = $orinoco->description();
    return unless defined $descr;

    if ( $descr =~ m/V(\d+\.\d+)/ ) {
        return $1;
    }
    if ( $descr =~ m/v(\d+\.\d+\.\d+)/ ) {
        return $1;
    }

    return;
}

sub os_bin {
    my $orinoco = shift;

    my $descr = $orinoco->description();
    return unless defined $descr;

    if ( $descr =~ m/V(\d+\.\d+)$/ ) {
        return $1;
    }
    if ( $descr =~ m/v(\d+\.\d+\.\d+)$/ ) {
        return $1;
    }

    return;
}

sub vendor {
    return 'proxim';
}

sub model {
    my $orinoco = shift;

    my $descr = $orinoco->description();
    return unless defined $descr;

    return $1             if ( $descr =~ /(AP-\d+)/ );
    return 'WavePOINT-II' if ( $descr =~ /WavePOINT-II/ );
    return 'Outdoor Router' if ( $descr =~ /Wireless Router/ );

    return;
}

sub serial {
    my $orinoco = shift;

    my $descr = $orinoco->description();
    return unless defined $descr;

    $descr = $1 if $descr =~ /SN-(\S+)/;
    return $descr;
}

sub i_ignore {
    my $orinoco = shift;
    my $partial = shift;

    my $descr = $orinoco->i_description($partial) || {};

    my %i_ignore;
    foreach my $if ( keys %$descr ) {
        my $type = $descr->{$if};

        # Skip virtual interfaces
        $i_ignore{$if}++ if $type =~ /(lo|empty|PCMCIA)/i;
    }
    return \%i_ignore;
}

sub interfaces {
    my $orinoco = shift;
    my $partial = shift;

    my $interfaces   = $orinoco->i_index($partial)       || {};
    my $descriptions = $orinoco->i_description($partial) || {};

    my %interfaces = ();
    foreach my $iid ( keys %$interfaces ) {
        my $desc = $descriptions->{$iid};
        next unless defined $desc;
        next if $desc =~ /(lo|empty|PCMCIA)/i;

        $desc = 'AMD' if $desc =~ /AMD/;

        $interfaces{$iid} = $desc;
    }
    return \%interfaces;
}

#sub i_ssidbcast {
#    my $orinoco = shift;
#    my $partial = shift;
#
#    my $bcast = $orinoco->ori_closed_sys($partial) || {};
#
#    my %i_ssidbcast;
#    foreach my $iid (keys %$bcast){
#        my $bc   = $bcast->{$iid};
#        next unless defined $bc;
#
#        $i_ssidbcast{$iid} = $bc;
#    }
#    return \%i_ssidbcast;
#}

1;
__END__

=head1 NAME

SNMP::Info::Layer2::Orinoco - SNMP Interface to Orinoco Series Access Points

=head1 AUTHOR

Eric Miller

=head1 SYNOPSIS

 # Let SNMP::Info determine the correct subclass for you. 
 my $orinoco = new SNMP::Info(
                          AutoSpecify => 1,
                          Debug       => 1,
                          DestHost    => 'myswitch',
                          Community   => 'public',
                          Version     => 2
                        ) 
    or die "Can't connect to DestHost.\n";

 my $class = $orinoco->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

=head1 DESCRIPTION

Provides abstraction to the configuration information obtainable from
Orinoco Access Point through SNMP.  Orinoco devices have been manufactured
by Proxim, Agere, and Lucent.

For speed or debugging purposes you can call the subclass directly, but not
after determining a more specific class using the method above. 

 my $orinoco = new SNMP::Info::Layer2::Orinoco(...);

=head2 Inherited Classes

=over

=item SNMP::Info::Layer2

=item SNMP::Info::IEEE802dot11

=back

=head2 Required MIBs

=over

None.

=back

=head2 Inherited MIBs

See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.

See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.

=head1 GLOBALS

These are methods that return scalar value from SNMP

=over

=item $orinoco->vendor()

Returns 'proxim'

=item $orinoco->model()

Returns the model extracted from C<sysDescr>.

=item $orinoco->os()

Returns 'Orinoco'

=item $orinoco->os_ver()

Returns the software version extracted from C<sysDescr>.

=item $orinoco->os_bin()

Returns the firmware version extracted from C<sysDescr>.

=item $orinoco->serial()

Returns the serial number extracted from C<sysDescr>.

=back

=head2 Global Methods imported from SNMP::Info::Layer2

See L<SNMP::Info::Layer2/"GLOBALS"> for details.

=head2 Global Methods imported from SNMP::Info::IEEE802dot11

See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.

=head1 TABLE METHODS

These are methods that return tables of information in the form of a reference
to a hash.

=head2 Overrides

=over

=item $orinoco->interfaces()

Returns reference to map of IIDs to physical ports. 

=item $orinoco->i_ignore()

Returns reference to hash of IIDs to ignore.

=back

=head2 Table Methods imported from SNMP::Info::Layer2

See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

=head2 Table Methods imported from SNMP::Info::IEEE802dot11

See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.

=cut