=head1 Logic Programming in Perl
=head2 Introduction
A programmer who hasn't been exposed to all four of the imperative,
functional, objective, and logical programming styles has one or more
conceptual blindspots. It's like knowing how to boil but not fry.
Programming is not a skill one develops in five easy lessons.
-- Tom Christiansen
By now, many Perl programmers know that the language offers support for
imperative, objective, and functional programming. However, logic programming
seems to be a lost art. This article attempts to shed a little light on the
subject. It's not that Prolog can do things that Perl cannot or vice versa.
Instead, Prolog does some things more naturally than Perl -- and vice versa.
In fact, while I introduce you to Prolog, I won't be teaching a bunch of nifty
tricks to make your Perl more powerful. I can't say what needs you may have
and, in any event, the tools that allow logic programming in Perl are generally
alpha quality, thus making them unsuitable for production environments.
=head2 What is Logic Programming?
Logic programming is somewhat of a mystery to many Perl programmers because,
unlike imperative, objective, and functional styles, Perl does not have direct
support for logic programming. There is, however, much interest in bringing
logic programming to Perl 6. With luck the information presented here will not
be merely theoretical.
Logic programming is not as alien as programmers might think. Regular
expressions, SQL and grammars are all closely related to logic programming.
The shared component of these seemingly disparate technologies is how they
I<describe> their goals rather than state how to achieve it. This is the
essence of logic programming. Rather than tell the computer how to achieve a
given goal, we tell the computer what the goal looks like and let it figure out
how to get there. Because of this, some refer to logic programming as
"specification-based programming" because the specification and the program are
one and the same.
This article will focus on C<AI::Prolog>. Prolog, though not a "pure" logic
programming language, is the most widely used in the field. C<AI::Prolog> is a
Prolog engine written entirely in Perl and it's very easy to install and use.
However, if you start doing serious work in Prolog, I strongly recommend you
take a look at Salvador FandiE<241>o's C<Language::Prolog::Yaswi>. This module
allows access to SWI-Prolog (http://www.swi-prolog.org/) from within Perl.
It's more difficult to compile and get running, but it's faster and much more
powerful. Luke Palmer's new C<Logic> distribution takes a somewhat different
approach to the same problem space.
=head2 3 Things to Learn
Most programming in Prolog boils down to learning three things: facts, rules,
and queries. The basics of these can be learned in just a few minutes and will
let you read many Prolog programs.
=head3 Facts
Facts in Prolog are stored in what is called the I<database> or I<knowledge
base>. This isn't a PostgreSQL or SQLite database, but a plain-text file. In
fact, you would call it a program and I'd be hard-pressed to argue with you, so
I won't. In fact, I'll often refer to these as Prolog "programs" just to avoid
confusion.
Facts look like this:
gives(tom, book, sally).
B<Note:> While the order of the arguments is technically not relevant, there
is a convention to more or less read the arguments left to right. The above
fact can be read as "tom gives the book to sally." Of course, it is sometimes
read as "sally gives the book to tom", but whichever order you adopt, you must
keep it consistent.
A fact consists of a I<functor> (also known as the I<head>) and 0 or more
arguments, followed by a period. Allowed names for functors generally follow
allowed named for subroutines in Perl.
The number of arguments to the functor are known as the I<arity>. The functor,
followed by a slash and the arity ("gives/3" in this example) is called the
I<predicate>. A predicate can have as many clauses as you like.
gives(tom, book, sally).
gives(tom, book, martin).
gives('George Bush', grief, liberals).
gives('Bill Clinton', grief, conservatives).
Note that those are not function calls. Those are merely facts stating the
relationship of the arguments to one another. Additionally, "tom" and "book"
are each repeated. In Prolog, those each refer to the same entity.
Of course, facts can have a varying number of arguments, even for the same
functor. The following are all legal:
parent(bob, tim). % parent/2
parent(sue, alex, william). % parent/3
male(sue). % male/1
female(sue). % female/1
frobnitz. % frobnitz/0
You can name a predicate just about anything that makes sense, but note that
some predicates are built-in and their names are reserved. The document
C<AI::Prolog::Builtins> has a list of the predicates that C<AI::Prolog>
directly supports. If you're in the C<aiprolog> shell (explained later), you
can type C<help.> to get a list of built-in predicates and
C<help('functor/arity')> (e.g., C<help('consult/1')>) to get description of how
a particular built-in predicate works.
And that pretty much covers most of what you need to know about facts.
=head3 Rules
Rules, like facts, are stored in the program. Rules describe how we can infer
new facts, even though we haven't explicitly stated them.
gives(tom, book, SOMEONE) :-
person(SOMEONE),
likes(tom, SOMEONE).
This rule states that "Tom will give a book to anyone who Tom likes." Note that
we are not telling Prolog how to figure out to whom Tom will give books.
Instead, we have merely defined the conditions under which Tom is willing to
part with his material possessions.
To understand rules, read the neck operator, C<:->, as "if" and commas outside
of argument lists as "and." Further, arguments beginning with upper-case
letters are I<variables>, such as C<SOMEONE> in the rule above. Note that only
the first letter needs to be capitalized; C<Someone> would also be a variable,
as would C<SomeOne> or C<SOmeoNe>.
Of course, we could simply enumerate the relationships:
gives(tom, book, alice).
gives(tom, book, bob).
gives(tom, book, martin).
gives(tom, book, charlie).
gives(tom, book, ovid).
However, this quickly become unweildy as the number of people in our program
grows.
=head3 Queries
Now that we have a rough understanding of facts and rules, we need to know how
to get answers from them. Queries are typically entered in the "interactive
environment." This would be analogous to the query window in a database GUI.
With C<AI::Prolog>, a shell named C<aiprolog> is included for demonstration
purposes though we'll mainly focus on calling Prolog from within a Perl
program.
?- gives(tom, book, SOMEONE).
This looks just like a fact, but with some minor differences. The C<?-> at the
beginning of the query is a query prompt seen in interactive environments.
You'll also note that C<SOMEONE> is capitalized, making it a variable (only the
first letter needs to capitalized.) Thus, this query is asking who Tom will
gives books to.
?- gives(WHO, book, SOMEONE).
This query looks like the previous one, but since the first argument is
capitalized, we're asking "who will give books to whom?".
?- gives(WHO, WHAT, WHOM).
Finally, because all arguments are variables, we're asking for everyone who
will give anything to anybody.
Note that no code changes are necessary for any of this. Because Prolog facts
and rules define relationships between things, Prolog can automatically infer
additional relationships if they are logically supported by the program.
Let's take a closer look at this, first focusing on the C<aiprolog> shell.
Assuming you've installed C<AI::Prolog> and said "yes" to installing the
C<aiprolog> shell, enter the following text in a file and save it as
I<gives.pro>. Note that lines beginning with a percent sign (C<%>) are
single-line comments.
% who are people?
person(bob).
person(sally).
person(tom).
person(alice).
% who likes whom?
likes(tom, bob).
likes(tom, alice).
likes(alice, bob).
% who has what
has(tom, book).
has(alice, ring).
has(bob, luck).
% who will give what to whom?
gives(WHO, WHAT, WHOM) :-
has(WHO, WHAT),
person(WHOM),
likes(WHO, WHOM).
gives(tom,book,harry).
When starting the shell, you can read in a file by supplying as a name on the
command line:
$ aiprolog gives.pro
Alternately, you can I<consult> the file from the shell:
$ aiprolog
Welcome to AI::Prolog v 0.732
Copyright (c) 2005, Curtis "Ovid" Poe.
AI::Prolog comes with ABSOLUTELY NO WARRANTY. This library is free software;
you can redistribute it and/or modify it under the same terms as Perl itself.
Type '?' for help.
?- consult('gives.pro').
The second notation allows you to consult multiple files and add all of them to
the knowledge base.
After issuing the C<consult/1> command, the shell will appear to hang. Hit
I<Enter> to continue. We'll explain this behavior in a moment.
Now that you've loaded the program into the shell, issue the following query:
?- gives(X,Y,Z).
The shell should respond:
gives(tom, book, bob)
It will appear to hang. It wants to know if you wish for more results or if
you are going to continue. Typing a semicolon (;) tells Prolog that you want
it to I<resatisfy> the goal. In other words, you're asking Prolog if there are
more solutions. If you keep hitting the semicolon, you should see something
similar to the following:
?- gives(X,Y,Z).
gives(tom, book, bob) ;
gives(tom, book, alice) ;
gives(alice, ring, bob) ;
gives(tom, book, harry) ;
No
?-
That final "No" is Prolog telling you that there are no more results which
satisfy your goal (query). (If you hit I<Enter> before Prolog prints "No", it
will print "Yes", letting you know that it found results for you. This is
standard behavior in Prolog.)
One thing you might notice is that the last result, C<gives(tom, book, harry)>,
does not match the rule we set up for C<gives/3>. However, we get this result
because we chose to hard-code this fact as the last line of the Prolog program.
=head2 How this works
At this point, it's worth having a bit of a digression to explain how this
works.
Many deductive systems in artificial intelligence are based on two algorithms:
backtracking and unification. You're probably already familiar with backtracking
from regular expressions. In fact, regular expressions are very similar to
Prolog in that you specify a pattern for your data and let the regex engine
worry about how to do the matching.
In a regular expression, if a partial match is made, the regex engine remembers
where the end of that match occurred and tries to match more of the string. If
it fails, it backtracks to the last place a successful match was made and sees
if there are alternative matches it can try. If that fails, it keeps
backtracking to the last successful match and repeats that process until it
either finds a match or fails completely.
Unification, described in a fit of wild hand-waving, attempts to take two
logical terms and "unify" them. Imagine you have the following two lists:
( 1, 2, undef, undef, 5 )
( 1, 2, 3, 4, undef )
Imagine that undef means "unknown". We can unify those two lists because every
element that is known corresponds in the two lists. This leaves us with a list
of the integers one through five.
( 1, 2, 3, 4, 5 )
However, what happens if the last element of the first list is unknown?
( 1, 2, undef, undef, undef )
( 1, 2, 3, 4, undef )
We can still unify the two lists. In this case, we get the same five element
list, but the last item is unknown.
( 1, 2, 3, 4, undef )
If corresponding terms of the two lists are both bound (has a value) but not
equal, the lists will not unify:
( 1, 23, undef, undef, undef )
( 1, 2, 3, 4, undef )
Logic programming works by pushing these lists onto a stack and walking through
the stack and seeing if you can unify everything (sort of). But how to unify
from one item to the next? We assign names to the unknown values and see if
we can unify them. When we get to the next item in the stack, we check to see
if any named variables have been unified. If so, the engine will try to unify
them along with the other known variables.
That's a bad explanation, so here's how it works in Prolog. Imagine the
following knowledge base:
parent(sally, tom)
parent(bill, tom)
parent(tom, sue)
parent(alice, sue)
parent(sarah, tim)
male(bill)
male(tom)
male(tim)
Now let's assume we have a rule that states that someone is a father if they
are a parent and they are male.
father(Person) :-
parent(Person, _),
male(Person).
In the above rule, the underscore is called an "anonymous vairable" and means
"I don't care what this value is." Prolog may still bind the variable
internally (though this behavior is not guaranteed), but its value will not be
taken into account when trying to determine if terms unify.
Taking the first term in the rule, the logic engine might try to unify this
with the first fact in the knowledge base, C<parent(sally, tom)>. C<Person>
unifies with I<sally>. The underscore, C<_>, unifies with I<tom> but since
we stated this unification is unimportant, we can ignore that.
We now have a fact which unifies with the first term in the rule, so we push
this information onto a stack. Since there are still additional facts we can
try, we set a "choice point" in the stack telling us which fact we last tried.
If we have to backtrack to see a choice point, we move on to the next fact and
try again.
Moving on to the next term in the rule, C<male(Person)>, we know that "sally"
is unified to C<Person>, so we now try to unify C<male(sally)> with all of the
corresponding rules in the knowledge base. Since we can't, the logic engine
backs up to the last item where we could make a new choice and sees
C<parent(bill, tom)>. C<Person> gets unified with I<bill>. Then in moving to
the next rule we see that we unify with C<male(bill)>. Now, we check the first
item in the rule and see that it's C<father(Person)>. and the logic engine
reports that I<bill> is a father.
Note that we can then force the engine to backtrack and by continuously
following this procedure, we can determine who all the fathers are.
And that's how logic programming works. Simple, eh? (Well, individual items can
be lists or other rules, but you get the idea).
=head2 Executing Prolog in Perl
Getting back to Perl, how would we implement that in a Perl program?
The basic process for using C<AI::Prolog> looks something like this:
use AI::Prolog;
my $prolog = AI::Prolog->new($prolog_code);
Create a new C<AI::Prolog> object, passing Prolog code as the argument. If you
prefer, you can wrap the constructor in a C<BEGIN> block:
my $prolog;
BEGIN {
$prolog = AI::Prolog->new(<<' END_PROLOG');
% some Prolog code goes here
END_PROLOG
}
This is not strictly necessary, but if your Prolog code has a syntax error, it
will be a compile-time error, not a run-time error, and you'll get an error
message similar to:
Unexpected character: (Expecting: ')'. Got (.)) at line number 12.
BEGIN failed--compilation aborted at test.pl line 7.
Note that the line number for "Unexpected character" is relative to the Prolog
code, not the Perl code.
After the contructor, issue your query:
$prolog->query($some_query);
And do something with the results:
while ( my $results = $prolog->results ) {
print "@$results\n";
}
Results are usually each returned as an array reference with the first argument
being the functor and subsequent arguments being the values. If any value is a
list, it will be represented as an array reference. We'll see more on that
later as we cover lists.
Now let's see the full program:
#!/usr/bin/perl
use strict;
use warnings;
use AI::Prolog;
my $prolog;
# If reading from DATA, we need a CHECK block to ensure that
# DATA is available by the time the constructor is called
CHECK {
$prolog = AI::Prolog->new( do { local $/; <DATA> } );
}
$prolog->query( 'father(WHO).' );
while ( my $results = $prolog->results ) {
print "@$results\n";
}
__DATA__
parent(sally, tom).
parent(bill, tom).
parent(tom, sue).
parent(alice, sue).
parent(sarah, tim).
male(bill).
male(tom).
male(tim).
father(Person) :-
parent(Person, _),
male(Person).
If you run this program, it will quite happily print out "father bill" and
"father tom." In fact, if you really want to see what's going on internally,
after you issue the query you can "trace" the execution:
$prolog->query('father(Who)');
$prolog->trace(1); # after the query, before the results
while ( my $result = $prolog->results ) {
...
Running the program again produces a lot of output, the beginning of which
matches our description of how logic programming works internally:
= Goals:
father(A)
==> Try: father(A) :-
parent(A, B),
male(A)
= Goals:
parent(A, C),
male(A)
==> Try: parent(sally, tom) :- null
= Goals:
male(sally)
==> Try: male(bill) :- null
<<== Backtrack:
= Goals:
male(sally)
==> Try: male(tom) :- null
<<== Backtrack:
= Goals:
male(sally)
==> Try: male(tim) :- null
<<== Backtrack:
[etc.]
Now if you really want to have fun with it, notice how you can rearrange the
clauses in the program at will and Prolog will return the same results (though
the order will likely change). This is because when one programs in a purely
declarative style, the order of the statements no longer matters. Subtle bugs
caused by switching two lines of code usually go away.
=head2 Prolog versus Perl
Now that you have a beginning understanding of what Prolog can do and how it
works internally, let's take a look at some of the implications of this. By
now, you know that the following can be read as "Ovid loves Perl":
loves(ovid, perl).
Assuming you've consulted a file with that fact in it, querying to find out
what I love is simple:
?- loves(ovid, WHAT).
In Perl, it's also pretty simple:
%loves = ( ovid => 'perl' );
$what = $loves{ovid};
But how do we find out who loves Perl? In Prolog:
loves(WHO, perl).
In Perl, however, we have two options, neither of them particularly good. We
can scan the C<%loves> hash for entries whose value is Perl, but this is
C<O(n)> when we want to stick with our simple C<O(1)> check. Thus, a more
common solution is to reverse the hash:
%who_loves = reverse %loves;
$who = $who_loves{perl};
(C<AI::Prolog>, being written in Perl, is slow. So the C<O(n)> versus
C<O(1)> argument doesn't hold. Versions written in C are far more practical in
this regard.)
But this fails, too. The first problem is that we have duplicated data. If we
have to add additional data to the C<%loves> hash, we'll have to remember to
synchronize the hashes. The second problem is that Perl is just a little too
popular:
loves(ovid, perl).
loves(alice, perl).
loves(bob, perl).
loves(charlie, perl).
If we simply reverse the hash for those entries, we lose three of those names.
So we have to play with this some more.
while ( my ($person, $thing) = each %loves ) {
push @{ $who_loves{$thing} }, $person;
}
Oh, wait. This fails too. You see, I'm fickle.
loves(ovid, perl).
loves(ovid, prolog).
loves(ovid, 'Perl 6').
(The quotes around "Perl 6" tell Prolog that this is a single value and that
it's a constant, not a variable.)
How do I find out everything Ovid loves? In Prolog, the query doesn't change:
loves(ovid, WHAT).
In Perl, our original hash wasn't enough.
my %loves = (
ovid => [ qw/perl prolog Perl6/ ],
alice => [ 'perl' ],
bob => [ 'perl' ],
charlie => [ 'perl' ],
);
my %who_loves;
while ( my ($person, $things) = each %loves ) {
foreach my $thing ( @$things ) {
push @{ $who_loves{$thing} }, $person;
}
}
Now that's starting to get really ugly. To represent and search that data in
Prolog is trivial. Now do you really want to have fun?
gives(tom, book, sally).
How would you represent that in Perl? There could be multiple gift-givers,
each gift-giver could give multiple things. There can be multiple recipients.
Representing this cleanly in Perl would not be easy. In fact, when handling
relational data, Perl has several weaknesses in relation to Prolog.
=over 4
=item * Data must often be duplicated to handle bi-directional relations.
=item * You must remember to synchronize data structures if the data changes.
=item * Often you need to change your code if your relations change.
=item * The code can get complex, leading to more bugs.
=back
=head2 Prolog versus SQL
At this point, there's a good chance that you're thinking that you would just
stuff this into a relational database. Of course, this assumes you need
relational data and want to go to the trouble of setting up a database and
querying it from Perl. This is a good solution if you only need simple
relations. In fact, Prolog is often used with relational databases as the two
are closely related. SQL is a I<special purpose> declarative language whereas
Prolog is a I<general purpose> declarative language.
Firing up SQLite, let's create two tables and insert data into them.
sqlite> CREATE TABLE parent_2 (parent VARCHAR(32), child VARCHAR(32));
sqlite> CREATE TABLE male_1 (person VARCHAR(32));
sqlite> INSERT INTO parent_2 VALUES ('sally', 'tom');
sqlite> INSERT INTO parent_2 VALUES ('bill', 'tom');
sqlite> INSERT INTO parent_2 VALUES ('tom', 'sue');
sqlite> INSERT INTO parent_2 VALUES ('alice', 'sue');
sqlite> INSERT INTO parent_2 VALUES ('sarah', 'tim');
sqlite> INSERT INTO male_1 VALUES ('bill');
sqlite> INSERT INTO male_1 VALUES ('tom');
sqlite> INSERT INTO male_1 VALUES ('tim');
We can then find out who the fathers are with the following query.
SELECT parent
FROM parent_2, male_1
WHERE parent_2.parent = male_1.person;
This is very similar to Prolog but we are forced to explicitly state the
relationship. Many Prolog queries are conceptually similar to SQL queries but
the relationships are listed directly in the program rather than in the query.
When working with a relational database, we can get around this limitation with
a view:
CREATE VIEW father AS
SELECT parent
FROM parent_2, male_1
WHERE parent_2.parent = male_1.person;
And finding out who the fathers are is trivial:
SELECT * FROM father;
Further, databases, unlike many Prolog implementations, support indexing,
hashing, and reordering of goals to reduce backtracking. Given all of that,
why on earth would someone choose Prolog over SQL?
As stated earlier, Prolog is a general purpose programming language. Imagine
if you had to write all of your programs in SQL. Could you do it? You could
with Prolog. Further, there's one huge reason why one might choose Prolog:
recursion. Some SQL implementations have non-standard support for recursion,
but usually recursive procedures are simulated by multiple calls from the
programming language using SQL.
Let's take a look at recursion and see why this is a win.
=head2 Recursion and Lists
In Prolog, lists are not data structures. They're actually implemented in
terms of something referred to as the "dot functor" (./2). For our purposes,
we'll ignore this and pretend they're really data types. In fact, there's
going to be a lot of handwaving here so forgive me if you already know Prolog.
If you know LISP or Scheme, the following will be very familiar.
A list in Prolog is usually represented by a series of terms enclosed in square
brackets:
owns(alice, [bookcase, cats, dogs]).
A list consists of a head and a tail. The tail, in turn, is another list with
a head and tail, continuing recursively until the tail is an empty list. This
can be represented as follows:
[ HEAD | TAIL ]
Note that the head and tail are separated by the pipe operator.
Now if Alice owns things, how do we find out if she owns cats? First, we need
to define a predicate that succeeds if a given term is an element of a given
list.
member(X, [ X | _ ]).
member(X, [ _ | TAIL ]) :-
member(X, TAIL).
The first clause in this predicate states that C<X> is a member of a list if
it's the head of a list. The second clause states that C<X> is a member of a
list if it's a member of the tail of the list. Here's how this works out:
?- member(3, [1,2,3,4]).
Prolog checks the first clause and sees that 3 is not the head of the list:
C<member(3, [1|2,3,4])>. It then checks to see if it's a member of the tail of
the list: C<member(3, [2|3,4])>. Again this fails so Prolog tries again and
we succeed: C<member(3, [3|4])>.
So how do we see if Alice has cats?
has(PERSON, THING) :-
owns(PERSON, STUFF),
member(THING, STUFF).
And the query C<has(alice, cats)> will now succeed. However, as mentioned
previously, Prolog predicates can often be reused to deduce information that
you and I could deduce. Thus, we can find out who owns cats (C<has(WHO,
cats)>), everything Alice has (C<has(alice, WHAT)>), or everything that
everyone has (C<has(WHO, WHAT>).
Why does that work? Well, going back to the C<member/2> predicate, we can find
out if a term is an element of a list:
member(ovid, SOMELIST).
Or we can find all members of a list:
member(X, SOMELIST). % assumes SOMELIST is bound to a list
Now that might seem kind of nifty, but appending lists in Prolog is truly
sublime. Many consider understanding the power of the C<append/3> predicate
the true gateway to appreciating logic programming. So, without further ado:
append([], X, X).
append([HEAD|X], Y, [HEAD|Z]) :-
append(X, Y, Z).
You'll probably want to put that in a file named I<append.pro> and in the
shell C<consult('append.pro')> to follow along with some of the examples
you're about to see.
Explaining how that works would take a bit of time, so I recommend you work it
out on your own. Instead, I'll focus on its implications.
It looks like a lot of work to define how to append two lists. Perl is much
simpler:
my @Z = (@X, @Y);
In fact, that hides quite a bit of complexity for us. Anyone who has had to
concatenate two arrays in C can appreciate the simplicity of the Perl approach.
So what would the complexity of the C<append/3> predicate gain us? Naturally,
we can use this to append two lists. (The following output is similar to what
one would see in regular Prolog systems. It's been reproduced here for
clarity.)
?- append([1,2,3], [4,5], Z).
Z = [1,2,3,4,5]
Of course, by now you should know that we can reuse this. We can use it to
figure out which list to append to C<X> to create C<Z>.
?- append([1,2,3], Y, [1,2,3,4,5]).
Y = [4,5]
We can also use this to figure out all combinations of two lists can be
appended together to create C<Z>.
?- append(X, Y, [1,2,3,4,5]).
X = [], Y = [1,2,3,4,5]
X = [1], Y = [1,2,3,4]
X = [1,2], Y = [1,2,3]
X = [1,2,3], Y = [1,2]
X = [1,2,3,4], Y = [1]
X = [1,2,3,4,5], Y = []
And the Perl equivalent:
use AI::Prolog;
my $prolog = AI::Prolog->new(<<"END_PROLOG");
append([], X, X).
append([W|X], Y, [W|Z]) :- append(X, Y, Z).
END_PROLOG
my $list = $prolog->list( qw/1 2 3 4 5/ );
$prolog->query("append(X,Y,[$list]).");
while ( my $results = $prolog->results ) {
my ( $x, $y, $z ) = @{ $results }[ 1, 2, 3 ];
$" = ', '; # Array separator
print "[@$x], [@$y], [@$z]\n";
}
As you can see, Prolog lists will be returned to Perl as array references.
C<< $results->[0] >> is the name of the predicate, C<append>, and the next three
elements are the successive values generated by Prolog.
=head1 Problems with Prolog
This article wouldn't be complete without listing some of the issues that have
hampered Prolog.
Perhaps the most significant is the depth-first exhaustive search algorithm
used for deduction. This is slow and due to the dynamically typed nature of
Prolog, many of the optimizations that have been applied to databases cannot be
applied to Prolog. Many Prolog programmers, understanding how the language
works internally, use the "cut" operator, C<!> (an exclamation point), to prune
the search trees. This leads to our next problem.
The "cut" operator is what is known as an "extra-logical" predicate. This,
along with I/O and predicates that assert and retract facts in the database
are a subject of much controversy. They cause issues because they frequently
cannot be backtracked over and the order of the clauses sometimes becomes
important when using them. They can be very useful and simplify many problems,
but they are more imperative in nature than logical and can introduce subtle
bugs.
Math is also handled poorly in Prolog. Consider the following program:
convert(Celsius, Fahrenheit) :-
Celsius is (Fahrenheit - 32) * 5 / 9.
You can then issue the query C<convert(Celsuis, 32)> and it will dutifully
report that the celsius value is zero. However, C<convert(0, 32)> fails. This
is because Prolog is not able to solve the right hand side of the equation
unless C<Fahrenheit> has a value at the time that Prolog starts examining the
equation. One simplistic way of getting around this limitation is with multiple
predicates and testing which argument is an unbound variable:
convert(Celsius, Fahrenheit) :-
var(Celsius),
not(var(Fahrenheit)),
Celsius is (Fahrenheit - 32) * 5 / 9.
convert(Celsius, Fahrenheit) :-
var(Fahrenheit),
not(var(Celsius)),
Fahrenheit is (Celsius * (9/5)) + 32.
This has a variety of problems, not the least of which is that it offers no
advantages over imperative programming.
ISO-Prolog does not define it, but many Prolog implementations support
constraints and these, though beyond the scope of this article, can get around
this and other issues. They can allow "logical" math and ensure that
"impossible" search branches are never explored. This can help to alleviate
many of the aforementioned concerns.
=head1 Conclusion
We've barely scratched the surface of what the Prolog language can do. The
language has many detractors and some criticisms are quite valid. However, the
language's simplicity and ease-of-use has kept it around. It's an excellent
starting point for understanding logic programming and exploration of AI. In
fact, many common uses for Prolog are heavily used in the AI arena:
=over 4
=item * Agent-based programming
=item * Expert Systems
=item * Fraud prevention (via inductive logic programming)
=item * Natural language processing
=item * Rules-based systems
=item * Scheduling systems
=item * And much more (it was even embedded in Windows NT)
=back
At the present time, I would not recommend C<AI::Prolog> for production work.
Attempts to bring logic programming to Perl are still relatively recent and no
module (to this author's knowledge) is currently ready for widespread use. The
C<AI::Prolog> distribution has a number of sample programs in the C<examples/>
directory and two complete, albeit small, games in the C<data/> directory.
=head1 References
=head2 Online Resources
=over 4
=item Adventure in Prolog
http://amzi.com/AdventureInProlog/index.htm
I highly recommend Amzi! Prolog's free online book "Adventure in Prolog." It's
clearly written and by the time you're done, you've built Prolog programs for
an adventure game, a genealogical database, a customer order inventory
application and a simple expert system.
=item Building Expert Systems in Prolog
http://amzi.com/ExpertSystemsInProlog/xsipfrtop.htm
This free online book, also by Amzi!, walks you through building expert
systems. It includes expert systems for solving Rubik's cube, tax preparation,
car diagnostics and many other examples.
=item Databases Vs AI
http://lsdis.cs.uga.edu/~cartic/SemWeb/DatabasesAI.ppt
This Powerpoint presentation discusses AI in Prolog and compares it to SQL
databases.
=item W-Prolog
http://goanna.cs.rmit.edu.au/~winikoff/wp/
Dr. Michael Winikoff kindly gave me permission to port this Java application to
Perl. This formed the basis of the earliest versions.
=item X-Prolog
http://www.iro.umontreal.ca/~vaucher/XProlog/
Jean Vaucher, Ph.D., allowed me to borrow from X-Prolog for the first
implementation of math in C<AI::Prolog>. Currently, C<AI::Prolog> is a hybrid
of these two applications, but it has evolved in a much different direction.
=back
=head2 Books
=over 4
=item Programming in Prolog
http://portal.acm.org/citation.cfm?id=39071
This book is sometimes referred to simply as "Clocksin/Mellish". First
published in the early 80s, this is the book that brought Prolog into the
mainstream.
=item The Art of Prolog
htp://mitpress.mit.edu/catalog/item/default.asp?ttype=2&tid=8327
This excellent MIT textbook is very in-depth and covers "proving" Prolog
programming, second-order logic, grammars, and many working examples.
=back
=head1 Credits
Many thanks to Rebekah Golden, Danny Werner and David Wheeler for their
excellents comments and insights.