;************************************************************************
;** An Assembly File Listing to generate a 16K ROM for the ZX Spectrum **
;************************************************************************
; -------------------------
; Last updated: 13-DEC-2004
; -------------------------
; TASM cross-assembler directives.
; ( comment out, perhaps, for other assemblers - see Notes at end.)
;#define DEFB .BYTE
;#define DEFW .WORD
;#define DEFM .TEXT
;#define ORG .ORG
;#define EQU .EQU
;#define equ .EQU
; It is always a good idea to anchor, using ORGs, important sections such as
; the character bitmaps so that they don't move as code is added and removed.
; Generally most approaches try to maintain main entry points as they are
; often used by third-party software.
KSTATE equ 0x5C00 ; Used in reading the keyboard.
KSTATE1 equ 0x5C01 ;
KSTATE2 equ 0x5C02 ;
KSTATE3 equ 0x5C03 ;
KSTATE4 equ 0x5C04 ;
KSTATE5 equ 0x5C05 ;
KSTATE6 equ 0x5C06 ;
KSTATE7 equ 0x5C07 ;
LAST_K equ 0x5C08 ; Stores newly pressed key.
REPDEL equ 0x5C09 ; Time (in 50ths of a second in 60ths of a second in
; N. America) that a key must be held down before it
; repeats. This starts off at 35, but you can POKE
; in other values.
REPPER equ 0x5C0A ; Delay (in 50ths of a second in 60ths of a second in
; N. America) between successive repeats of a key
; held down: initially 5.
DEFADD equ 0x5C0B ; Address of arguments of user defined function if
; one is being evaluated; otherwise 0.
K_DATA equ 0x5C0D ; Stores 2nd byte of colour controls entered
; from keyboard .
TVDATA equ 0x5C0E ; Stores bytes of coiour, AT and TAB controls going
; to television.
STRMS equ 0x5C10 ; Addresses of channels attached to streams.
CHARS equ 0x5C36 ; 256 less than address of character set (which
; starts with space and carries on to the copyright
; symbol). Normally in ROM, but you can set up your
; own in RAM and make CHARS point to it.
RASP equ 0x5C38 ; Length of warning buzz.
PIP equ 0x5C39 ; Length of keyboard click.
ERR_NR equ 0x5C3A ; 1 less than the report code. Starts off at 255 (for 1)
; so PEEK 23610 gives 255.
FLAGS equ 0x5C3B ; Various flags to control the BASIC system.
TV_FLAG equ 0x5C3C ; Flags associated with the television.
ERR_SP equ 0x5C3D ; Address of item on machine stack to be used as
; error return.
LIST_SP equ 0x5C3F ; Address of return address from automatic listing.
MODE equ 0x5C41 ; Specifies K, L, C. E or G cursor.
NEWPPC equ 0x5C42 ; Line to be jumped to.
NSPPC equ 0x5C44 ; Statement number in line to be jumped to. Poking
; first NEWPPC and then NSPPC forces a jump to
; a specified statement in a line.
PPC equ 0x5C45 ; Line number of statement currently being executed.
SUBPPC equ 0x5C47 ; Number within line of statement being executed.
BORDCR equ 0x5C48 ; Border colour * 8; also contains the attributes
; normally used for the lower half of the screen.
E_PPC equ 0x5C49 ; Number of current line (with program cursor).
VARS equ 0x5C4B ; Address of variables.
DEST equ 0x5C4D ; Address of variable in assignment.
CHANS equ 0x5C4F ; Address of channel data.
CURCHL equ 0x5C51 ; Address of information currently being used for
; input and output.
PROG equ 0x5C53 ; Address of BASIC program.
NXTLIN equ 0x5C55 ; Address of next line in program.
DATADD equ 0x5C57 ; Address of terminator of last DATA item.
E_LINE equ 0x5C59 ; Address of command being typed in.
K_CUR equ 0x5C5B ; Address of cursor.
CH_ADD equ 0x5C5D ; Address of the next character to be interpreted:
; the character after the argument of PEEK, or
; the NEWLINE at the end of a POKE statement.
X_PTR equ 0x5C5F ; Address of the character after the ? marker.
WORKSP equ 0x5C61 ; Address of temporary work space.
STKBOT equ 0x5C63 ; Address of bottom of calculator stack.
STKEND equ 0x5C65 ; Address of start of spare space.
BREG equ 0x5C67 ; Calculator's b register.
MEM equ 0x5C68 ; Address of area used for calculator's memory.
; (Usually MEMBOT, but not always.)
FLAGS2 equ 0x5C6A ; More flags.
DF_SZ equ 0x5C6B ; The number of lines (including one blank line)
; in the lower part of the screen.
S_TOP equ 0x5C6C ; The number of the top program line in automatic
; listings.
OLDPPC equ 0x5C6E ; Line number to which CONTINUE jumps.
OSPCC equ 0x5C70 ; Number within line of statement to which
; CONTINUE jumps.
FLAGX equ 0x5C71 ; Various flags.
STRLEN equ 0x5C72 ; Length of string type destination in assignment.
T_ADDR equ 0x5C74 ; Address of next item in syntax table (very unlikely
; to be useful).
SEED equ 0x5C76 ; The seed for RND. This is the variable that is set
; by RANDOMIZE.
FRAMES equ 0x5C78 ; 3 byte (least significant first), frame counter.
; Incremented every 20ms. See Chapter 18.
FRAMES3 equ 0x5C7A ; 3rd byte of FRAMES
UDG equ 0x5C7B ; Address of 1st user defined graphic You can change
; this for instance to save space by having fewer
; user defined graphics.
COORDS equ 0x5C7D ; x-coordinate of last point plotted.
COORDS_hi equ 0x5C7E ; y-coordinate of last point plotted.
P_POSN equ 0x5C7F ; 33 column number of printer position
PR_CC equ 0x5C80 ; Full address of next position for LPRINT to print at
; (in ZX printer buffer). Legal values 5B00 - 5B1F.
; [Not used in 128K mode or when certain peripherals
; are attached]
ECHO_E equ 0x5C82 ; 33 column number and 24 line number (in lower half)
; of end of input buffer.
DF_CC equ 0x5C84 ; Address in display file of PRINT position.
DFCCL equ 0x5C86 ; Like DF CC for lower part of screen.
S_POSN equ 0x5C88 ; 33 column number for PRINT position
S_POSN_hi equ 0x5C89 ; 24 line number for PRINT position.
SPOSNL equ 0x5C8A ; Like S POSN for lower part
SCR_CT equ 0x5C8C ; Counts scrolls: it is always 1 more than the number
; of scrolls that will be done before stopping with
; scroll? If you keep poking this with a number
; bigger than 1 (say 255), the screen will scroll
; on and on without asking you.
ATTR_P equ 0x5C8D ; Permanent current colours, etc (as set up by colour
; statements).
MASK_P equ 0x5C8E ; Used for transparent colours, etc. Any bit that
; is 1 shows that the corresponding attribute bit
; is taken not from ATTR P, but from what is already
; on the screen.
ATTR_T equ 0x5C8F ; Temporary current colours, etc (as set up by
; colour items).
MASK_T equ 0x5C90 ; Like MASK P, but temporary.
P_FLAG equ 0x5C91 ; More flags.
MEMBOT equ 0x5C92 ; Calculator's memory area; used to store numbers
; that cannot conveniently be put on
; the calculator stack.
NMIADD equ 0x5CB0 ; This is the address of a user supplied NMI address
; which is read by the standard ROM when a peripheral
; activates the NMI. Probably intentionally disabled
; so that the effect is to perform a reset if both
; locations hold zero, but do nothing if the locations
; hold a non-zero value. Interface 1's with serial
; number greater than 87315 will initialize these
; locations to 0 and 80 to allow the RS232 "T" channel
; to use a variable line width. 23728 is the current
; print position and 23729 the width - default 80.
RAMTOP equ 0x5CB2 ; Address of last byte of BASIC system area.
P_RAMT equ 0x5CB4 ; Address of last byte of physical RAM.
IY0 equ ERR_NR
org 0x0000
;*****************************************
;** Part 1. RESTART ROUTINES AND TABLES **
;*****************************************
; -----------
; THE 'START'
; -----------
; At switch on, the Z80 chip is in Interrupt Mode 0.
; The Spectrum uses Interrupt Mode 1.
; This location can also be 'called' to reset the machine.
; Typically with PRINT USR 0.
;; START
START:
di ; Disable Interrupts.
xor a ; Signal coming from START.
ld de,0xFFFF ; Set pointer to top of possible physical RAM.
jp START_NEW ; Jump forward to common code at START-NEW.
; -------------------
; THE 'ERROR' RESTART
; -------------------
; The error pointer is made to point to the position of the error to enable
; the editor to highlight the error position if it occurred during syntax
; checking. It is used at 37 places in the program. An instruction fetch
; on address $0008 may page in a peripheral ROM such as the Sinclair
; Interface 1 or Disciple Disk Interface. This was not an original design
; concept and not all errors pass through here.
;; ERROR-1
ERROR_1:
ld hl,(CH_ADD) ; Fetch the character address from CH_ADD.
ld (X_PTR),hl ; Copy it to the error pointer X_PTR.
jr ERROR_2 ; Forward to continue at ERROR-2.
; -----------------------------
; THE 'PRINT CHARACTER' RESTART
; -----------------------------
; The A register holds the code of the character that is to be sent to
; the output stream of the current channel. The alternate register set is
; used to output a character in the A register so there is no need to
; preserve any of the current main registers (HL, DE, BC).
; This restart is used 21 times.
;; PRINT-A
PRINT_A:
jp PRINT_A_2 ; Jump forward to continue at PRINT-A-2.
; ---
defb 0xFF,0xFF,0xFF,0xFF,0xFF
; Five unused locations.
; -------------------------------
; THE 'COLLECT CHARACTER' RESTART
; -------------------------------
; The contents of the location currently addressed by CH_ADD are fetched.
; A return is made if the value represents a character that has
; relevance to the BASIC parser. Otherwise CH_ADD is incremented and the
; tests repeated. CH_ADD will be addressing somewhere -
; 1) in the BASIC program area during line execution.
; 2) in workspace if evaluating, for example, a string expression.
; 3) in the edit buffer if parsing a direct command or a new BASIC line.
; 4) in workspace if accepting input but not that from INPUT LINE.
;; GET-CHAR
GET_CHAR:
ld hl,(CH_ADD) ; fetch the address from CH_ADD.
ld a,(hl) ; use it to pick up current character.
;; TEST-CHAR
TEST_CHAR:
call SKIP_OVER ; routine SKIP-OVER tests if the character is
; relevant.
ret nc ; Return if it is significant.
; ------------------------------------
; THE 'COLLECT NEXT CHARACTER' RESTART
; ------------------------------------
; As the BASIC commands and expressions are interpreted, this routine is
; called repeatedly to step along the line. It is used 83 times.
;; NEXT-CHAR
NEXT_CHAR:
call CH_ADD_1 ; routine CH-ADD+1 fetches the next immediate
; character.
jr TEST_CHAR ; jump back to TEST-CHAR until a valid
; character is found.
; ---
defb 0xFF,0xFF,0xFF ; unused
; -----------------------
; THE 'CALCULATE' RESTART
; -----------------------
; This restart enters the Spectrum's internal, floating-point, stack-based,
; FORTH-like language.
; It is further used recursively from within the calculator.
; It is used on 77 occasions.
;; FP-CALC
FP_CALC:
jp CALCULATE ; jump forward to the CALCULATE routine.
; ---
defb 0xFF,0xFF,0xFF,0xFF,0xFF
; spare - note that on the ZX81, space being a
; little cramped, these same locations were
; used for the five-byte end-calc literal.
; ------------------------------
; THE 'CREATE BC SPACES' RESTART
; ------------------------------
; This restart is used on only 12 occasions to create BC spaces
; between workspace and the calculator stack.
;; BC-SPACES
BC_SPACES:
push bc ; Save number of spaces.
ld hl,(WORKSP) ; Fetch WORKSP.
push hl ; Save address of workspace.
jp RESERVE ; Jump forward to continuation code RESERVE.
; --------------------------------
; THE 'MASKABLE INTERRUPT' ROUTINE
; --------------------------------
; This routine increments the Spectrum's three-byte FRAMES counter fifty
; times a second (sixty times a second in the USA ).
; Both this routine and the called KEYBOARD subroutine use the IY register
; to access system variables and flags so a user-written program must
; disable interrupts to make use of the IY register.
;; MASK-INT
MASK_INT:
push af ; Save the registers that will be used but not
push hl ; the IY register unfortunately.
ld hl,(FRAMES) ; Fetch the first two bytes at FRAMES1.
inc hl ; Increment lowest two bytes of counter.
ld (FRAMES),hl ; Place back in FRAMES1.
ld a,h ; Test if the result was zero.
or l
jr nz,KEY_INT ; Forward, if not, to KEY-INT
inc (iy+FRAMES3-IY0) ; otherwise increment FRAMES3 the third byte.
; Now save the rest of the main registers and read and decode the keyboard.
;; KEY-INT
KEY_INT:
push bc ; Save the other main registers.
push de
call KEYBOARD ; Routine KEYBOARD executes a stage in the
; process of reading a key-press.
pop de
pop bc ; Restore registers.
pop hl
pop af
ei ; Enable Interrupts.
ret ; Return.
; ---------------------
; THE 'ERROR-2' ROUTINE
; ---------------------
; A continuation of the code at 0008.
; The error code is stored and after clearing down stacks, an indirect jump
; is made to MAIN-4, etc. to handle the error.
;; ERROR-2
ERROR_2:
pop hl ; drop the return address - the location
; after the RST 08H instruction.
ld l,(hl) ; fetch the error code that follows.
; (nice to see this instruction used.)
; Note. this entry point is used when out of memory at REPORT-4.
; The L register has been loaded with the report code but X-PTR is not
; updated.
;; ERROR-3
ERROR_3:
ld (iy+ERR_NR-IY0),l ; Store it in the system variable ERR_NR.
ld sp,(ERR_SP) ; ERR_SP points to an error handler on the
; machine stack. There may be a hierarchy
; of routines.
; To MAIN-4 initially at base.
; or REPORT-G on line entry.
; or ED-ERROR when editing.
; or ED-FULL during ed-enter.
; or IN-VAR-1 during runtime input etc.
jp SET_STK ; Jump to SET-STK to clear the calculator stack
; and reset MEM to usual place in the systems
; variables area and then indirectly to MAIN-4,
; etc.
; ---
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
; Unused locations
; before the fixed-position
; NMI routine.
; ------------------------------------
; THE 'NON-MASKABLE INTERRUPT' ROUTINE
; ------------------------------------
;
; There is no NMI switch on the standard Spectrum or its peripherals.
; When the NMI line is held low, then no matter what the Z80 was doing at
; the time, it will now execute the code at 66 Hex.
; This Interrupt Service Routine will jump to location zero if the contents
; of the system variable NMIADD are zero or return if the location holds a
; non-zero address. So attaching a simple switch to the NMI as in the book
; "Spectrum Hardware Manual" causes a reset. The logic was obviously
; intended to work the other way. Sinclair Research said that, since they
; had never advertised the NMI, they had no plans to fix the error "until
; the opportunity arose".
;
; Note. The location NMIADD was, in fact, later used by Sinclair Research
; to enhance the text channel on the ZX Interface 1.
; On later Amstrad-made Spectrums, and the Brazilian Spectrum, the logic of
; this routine was indeed reversed but not as at first intended.
;
; It can be deduced by looking elsewhere in this ROM that the NMIADD system
; variable pointed to L121C and that this enabled a Warm Restart to be
; performed at any time, even while playing machine code games, or while
; another Spectrum has been allowed to gain control of this one.
;
; Software houses would have been able to protect their games from attack by
; placing two zeros in the NMIADD system variable.
;; RESET
RESET:
push af ; save the
push hl ; registers.
ld hl,(NMIADD) ; fetch the system variable NMIADD.
ld a,h ; test address
or l ; for zero.
jr nz,NO_RESET ; skip to NO-RESET if NOT ZERO
jp (hl) ; jump to routine ( i.e. L0000 )
;; NO-RESET
NO_RESET:
pop hl ; restore the
pop af ; registers.
retn ; return to previous interrupt state.
; ---------------------------
; THE 'CH ADD + 1' SUBROUTINE
; ---------------------------
; This subroutine is called from RST 20, and three times from elsewhere
; to fetch the next immediate character following the current valid character
; address and update the associated system variable.
; The entry point TEMP-PTR1 is used from the SCANNING routine.
; Both TEMP-PTR1 and TEMP-PTR2 are used by the READ command routine.
;; CH-ADD+1
CH_ADD_1:
ld hl,(CH_ADD) ; fetch address from CH_ADD.
;; TEMP-PTR1
TEMP_PTR1:
inc hl ; increase the character address by one.
;; TEMP-PTR2
TEMP_PTR2:
ld (CH_ADD),hl ; update CH_ADD with character address.
X007B:
ld a,(hl) ; load character to A from HL.
ret ; and return.
; --------------------------
; THE 'SKIP OVER' SUBROUTINE
; --------------------------
; This subroutine is called once from RST 18 to skip over white-space and
; other characters irrelevant to the parsing of a BASIC line etc. .
; Initially the A register holds the character to be considered
; and HL holds its address which will not be within quoted text
; when a BASIC line is parsed.
; Although the 'tab' and 'at' characters will not appear in a BASIC line,
; they could be present in a string expression, and in other situations.
; Note. although white-space is usually placed in a program to indent loops
; and make it more readable, it can also be used for the opposite effect and
; spaces may appear in variable names although the parser never sees them.
; It is this routine that helps make the variables 'Anum bEr5 3BUS' and
; 'a number 53 bus' appear the same to the parser.
;; SKIP-OVER
SKIP_OVER:
cp 0x21 ; test if higher than space.
ret nc ; return with carry clear if so.
cp 0x0D ; carriage return ?
ret z ; return also with carry clear if so.
; all other characters have no relevance
; to the parser and must be returned with
; carry set.
cp 0x10 ; test if 0-15d
ret c ; return, if so, with carry set.
cp 0x18 ; test if 24-32d
ccf ; complement carry flag.
ret c ; return with carry set if so.
; now leaves 16d-23d
inc hl ; all above have at least one extra character
; to be stepped over.
cp 0x16 ; controls 22d ('at') and 23d ('tab') have two.
jr c,SKIPS ; forward to SKIPS with ink, paper, flash,
; bright, inverse or over controls.
; Note. the high byte of tab is for RS232 only.
; it has no relevance on this machine.
inc hl ; step over the second character of 'at'/'tab'.
;; SKIPS
SKIPS:
scf ; set the carry flag
ld (CH_ADD),hl ; update the CH_ADD system variable.
ret ; return with carry set.
; ------------------
; THE 'TOKEN' TABLES
; ------------------
; The tokenized characters 134d (RND) to 255d (COPY) are expanded using
; this table. The last byte of a token is inverted to denote the end of
; the word. The first is an inverted step-over byte.
;; TKN-TABLE
TKN_TABLE:
defm7 '?'
defm7 'RND'
defm7 'INKEY$'
defm7 'PI'
defm7 'FN'
defm7 'POINT'
defm7 'SCREEN$'
defm7 'ATTR'
defm7 'AT'
defm7 'TAB'
defm7 'VAL$'
defm7 'CODE'
defm7 'VAL'
defm7 'LEN'
defm7 'SIN'
defm7 'COS'
defm7 'TAN'
defm7 'ASN'
defm7 'ACS'
defm7 'ATN'
defm7 'LN'
defm7 'EXP'
defm7 'INT'
defm7 'SQR'
defm7 'SGN'
defm7 'ABS'
defm7 'PEEK'
defm7 'IN'
defm7 'USR'
defm7 'STR$'
defm7 'CHR$'
defm7 'NOT'
defm7 'BIN'
; The previous 32 function-type words are printed without a leading space
; The following have a leading space if they begin with a letter
defm7 'OR'
defm7 'AND'
defm7 '<=' ; <=
defm7 '>=' ; >=
defm7 '<>' ; <>
defm7 'LINE'
defm7 'THEN'
defm7 'TO'
defm7 'STEP'
defm7 'DEF FN'
defm7 'CAT'
defm7 'FORMAT'
defm7 'MOVE'
defm7 'ERASE'
defm7 'OPEN #'
defm7 'CLOSE #'
defm7 'MERGE'
defm7 'VERIFY'
defm7 'BEEP'
defm7 'CIRCLE'
defm7 'INK'
defm7 'PAPER'
defm7 'FLASH'
defm7 'BRIGHT'
defm7 'INVERSE'
defm7 'OVER'
defm7 'OUT'
defm7 'LPRINT'
defm7 'LLIST'
defm7 'STOP'
defm7 'READ'
defm7 'DATA'
defm7 'RESTORE'
defm7 'NEW'
defm7 'BORDER'
defm7 'CONTINUE'
defm7 'DIM'
defm7 'REM'
defm7 'FOR'
defm7 'GO TO'
defm7 'GO SUB'
defm7 'INPUT'
defm7 'LOAD'
defm7 'LIST'
defm7 'LET'
defm7 'PAUSE'
defm7 'NEXT'
defm7 'POKE'
defm7 'PRINT'
defm7 'PLOT'
defm7 'RUN'
defm7 'SAVE'
defm7 'RANDOMIZE'
defm7 'IF'
defm7 'CLS'
defm7 'DRAW'
defm7 'CLEAR'
defm7 'RETURN'
defm7 'COPY'
; ----------------
; THE 'KEY' TABLES
; ----------------
; These six look-up tables are used by the keyboard reading routine
; to decode the key values.
;
; The first table contains the maps for the 39 keys of the standard
; 40-key Spectrum keyboard. The remaining key [SHIFT $27] is read directly.
; The keys consist of the 26 upper-case alphabetic characters, the 10 digit
; keys and the space, ENTER and symbol shift key.
; Unshifted alphabetic keys have $20 added to the value.
; The keywords for the main alphabetic keys are obtained by adding $A5 to
; the values obtained from this table.
;; MAIN-KEYS
MAIN_KEYS:
defm 'B' ; B
defm 'H' ; H
defm 'Y' ; Y
defm '6' ; 6
defm '5' ; 5
defm 'T' ; T
defm 'G' ; G
defm 'V' ; V
defm 'N' ; N
defm 'J' ; J
defm 'U' ; U
defm '7' ; 7
defm '4' ; 4
defm 'R' ; R
defm 'F' ; F
defm 'C' ; C
defm 'M' ; M
defm 'K' ; K
defm 'I' ; I
defm '8' ; 8
defm '3' ; 3
defm 'E' ; E
defm 'D' ; D
defm 'X' ; X
defb 0x0E ; SYMBOL SHIFT
defm 'L' ; L
defm 'O' ; O
defm '9' ; 9
defm '2' ; 2
defm 'W' ; W
defm 'S' ; S
defm 'Z' ; Z
defm ' ' ; SPACE
defb 0x0D ; ENTER
defm 'P' ; P
defm '0' ; 0
defm '1' ; 1
defm 'Q' ; Q
defm 'A' ; A
;; E-UNSHIFT
; The 26 unshifted extended mode keys for the alphabetic characters.
; The green keywords on the original keyboard.
E_UNSHIFT:
defb 0xE3 ; READ
defb 0xC4 ; BIN
defb 0xE0 ; LPRINT
defb 0xE4 ; DATA
defb 0xB4 ; TAN
defb 0xBC ; SGN
defb 0xBD ; ABS
defb 0xBB ; SQR
defb 0xAF ; CODE
defb 0xB0 ; VAL
defb 0xB1 ; LEN
defb 0xC0 ; USR
defb 0xA7 ; PI
defb 0xA6 ; INKEY$
defb 0xBE ; PEEK
defb 0xAD ; TAB
defb 0xB2 ; SIN
defb 0xBA ; INT
defb 0xE5 ; RESTORE
defb 0xA5 ; RND
defb 0xC2 ; CHR$
defb 0xE1 ; LLIST
defb 0xB3 ; COS
defb 0xB9 ; EXP
defb 0xC1 ; STR$
defb 0xB8 ; LN
;; EXT-SHIFT
; The 26 shifted extended mode keys for the alphabetic characters.
; The red keywords below keys on the original keyboard.
EXT_SHIFT:
defm '~' ; ~
defb 0xDC ; BRIGHT
defb 0xDA ; PAPER
defm '\' ; \ ;
defb 0xB7 ; ATN
defm '{' ; {
defm '}' ; }
defb 0xD8 ; CIRCLE
defb 0xBF ; IN
defb 0xAE ; VAL$
defb 0xAA ; SCREEN$
defb 0xAB ; ATTR
defb 0xDD ; INVERSE
defb 0xDE ; OVER
defb 0xDF ; OUT
defb 0x7F ; (Copyright character)
defb 0xB5 ; ASN
defb 0xD6 ; VERIFY
defm '|' ; |
defb 0xD5 ; MERGE
defm ']' ; ]
defb 0xDB ; FLASH
defb 0xB6 ; ACS
defb 0xD9 ; INK
defm '[' ; [
defb 0xD7 ; BEEP
;; CTL-CODES
; The ten control codes assigned to the top line of digits when the shift
; key is pressed.
CTL_CODES:
defb 0x0C ; DELETE
defb 0x07 ; EDIT
defb 0x06 ; CAPS LOCK
defb 0x04 ; TRUE VIDEO
defb 0x05 ; INVERSE VIDEO
defb 0x08 ; CURSOR LEFT
defb 0x0A ; CURSOR DOWN
defb 0x0B ; CURSOR UP
defb 0x09 ; CURSOR RIGHT
defb 0x0F ; GRAPHICS
;; SYM-CODES
; The 26 red symbols assigned to the alphabetic characters of the keyboard.
; The ten single-character digit symbols are converted without the aid of
; a table using subtraction and minor manipulation.
SYM_CODES:
defb 0xE2 ; STOP
defm '*' ; *
defm '?' ; ?
defb 0xCD ; STEP
defb 0xC8 ; >=
defb 0xCC ; TO
defb 0xCB ; THEN
defm '^' ; ^
defb 0xAC ; AT
defm '-' ; -
defm '+' ; +
defm '=' ; =
defm '.' ; .
defm ',' ; ,
defm ';' ; ;
defm '"' ; "
defb 0xC7 ; <=
defm '<' ; <
defb 0xC3 ; NOT
defm '>' ; >
defb 0xC5 ; OR
defm '/' ; /
defb 0xC9 ; <>
defb 0x60 ; pound
defb 0xC6 ; AND
defm ':' ; :
;; E-DIGITS
; The ten keywords assigned to the digits in extended mode.
; The remaining red keywords below the keys.
E_DIGITS:
defb 0xD0 ; FORMAT
defb 0xCE ; DEF FN
defb 0xA8 ; FN
defb 0xCA ; LINE
defb 0xD3 ; OPEN #
defb 0xD4 ; CLOSE #
defb 0xD1 ; MOVE
defb 0xD2 ; ERASE
defb 0xA9 ; POINT
defb 0xCF ; CAT
;*******************************
;** Part 2. KEYBOARD ROUTINES **
;*******************************
; Using shift keys and a combination of modes the Spectrum 40-key keyboard
; can be mapped to 256 input characters
; ---------------------------------------------------------------------------
;
; 0 1 2 3 4 -Bits- 4 3 2 1 0
; PORT PORT
;
; F7FE [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] | [ 6 ] [ 7 ] [ 8 ] [ 9 ] [ 0 ] EFFE
; ^ | v
; FBFE [ Q ] [ W ] [ E ] [ R ] [ T ] | [ Y ] [ U ] [ I ] [ O ] [ P ] DFFE
; ^ | v
; FDFE [ A ] [ S ] [ D ] [ F ] [ G ] | [ H ] [ J ] [ K ] [ L ] [ ENT ] BFFE
; ^ | v
; FEFE [SHI] [ Z ] [ X ] [ C ] [ V ] | [ B ] [ N ] [ M ] [sym] [ SPC ] 7FFE
; ^ $27 $18 v
; Start End
; 00100111 00011000
;
; ---------------------------------------------------------------------------
; The above map may help in reading.
; The neat arrangement of ports means that the B register need only be
; rotated left to work up the left hand side and then down the right
; hand side of the keyboard. When the reset bit drops into the carry
; then all 8 half-rows have been read. Shift is the first key to be
; read. The lower six bits of the shifts are unambiguous.
; -------------------------------
; THE 'KEYBOARD SCANNING' ROUTINE
; -------------------------------
; From keyboard and s-inkey$
; Returns 1 or 2 keys in DE, most significant shift first if any
; key values 0-39 else 255
;; KEY-SCAN
KEY_SCAN:
ld l,0x2F ; initial key value
; valid values are obtained by subtracting
; eight five times.
ld de,0xFFFF ; a buffer to receive 2 keys.
ld bc,0xFEFE ; the commencing port address
; B holds 11111110 initially and is also
; used to count the 8 half-rows
; ; KEY-LINE
KEY_LINE:
in a,(c) ; read the port to A - bits will be reset
; if a key is pressed else set.
cpl ; complement - pressed key-bits are now set
and 0x1F ; apply 00011111 mask to pick up the
; relevant set bits.
jr z,KEY_DONE ; forward to KEY-DONE if zero and therefore
; no keys pressed in row at all.
ld h,a ; transfer row bits to H
ld a,l ; load the initial key value to A
;; KEY-3KEYS
KEY_3KEYS:
inc d ; now test the key buffer
ret nz ; if we have collected 2 keys already
; then too many so quit.
;; KEY-BITS
KEY_BITS:
sub 0x08 ; subtract 8 from the key value
; cycling through key values (top = $27)
; e.g. 2F> 27>1F>17>0F>07
; 2E> 26>1E>16>0E>06
srl h ; shift key bits right into carry.
jr nc,KEY_BITS ; back to KEY-BITS if not pressed
; but if pressed we have a value (0-39d)
ld d,e ; transfer a possible previous key to D
ld e,a ; transfer the new key to E
jr nz,KEY_3KEYS ; back to KEY-3KEYS if there were more
; set bits - H was not yet zero.
;; KEY-DONE
KEY_DONE:
dec l ; cycles 2F>2E>2D>2C>2B>2A>29>28 for
; each half-row.
rlc b ; form next port address e.g. FEFE > FDFE
jr c,KEY_LINE ; back to KEY-LINE if still more rows to do.
ld a,d ; now test if D is still FF ?
inc a ; if it is zero we have at most 1 key
; range now $01-$28 (1-40d)
ret z ; return if one key or no key.
cp 0x28 ; is it capsshift (was $27) ?
ret z ; return if so.
cp 0x19 ; is it symbol shift (was $18) ?
ret z ; return also
ld a,e ; now test E
ld e,d ; but first switch
ld d,a ; the two keys.
cp 0x18 ; is it symbol shift ?
ret ; return (with zero set if it was).
; but with symbol shift now in D
; ----------------------
; THE 'KEYBOARD' ROUTINE
; ----------------------
; Called from the interrupt 50 times a second.
;
;; KEYBOARD
KEYBOARD:
call KEY_SCAN ; routine KEY-SCAN
ret nz ; return if invalid combinations
; then decrease the counters within the two key-state maps
; as this could cause one to become free.
; if the keyboard has not been pressed during the last five interrupts
; then both sets will be free.
ld hl,KSTATE ; point to KSTATE-0
;; K-ST-LOOP
K_ST_LOOP:
bit 7,(hl) ; is it free ? (i.e. $FF)
jr nz,K_CH_SET ; forward to K-CH-SET if so
inc hl ; address the 5-counter
dec (hl) ; decrease the counter
dec hl ; step back
jr nz,K_CH_SET ; forward to K-CH-SET if not at end of count
ld (hl),0xFF ; else mark this particular map free.
;; K-CH-SET
K_CH_SET:
ld a,l ; make a copy of the low address byte.
ld hl,KSTATE4 ; point to KSTATE-4
; (ld l,$04 would do)
cp l ; have both sets been considered ?
jr nz,K_ST_LOOP ; back to K-ST-LOOP to consider this 2nd set
; now the raw key (0-38d) is converted to a main key (uppercase).
call K_TEST ; routine K-TEST to get main key in A
ret nc ; return if just a single shift
ld hl,KSTATE ; point to KSTATE-0
cp (hl) ; does the main key code match ?
jr z,K_REPEAT ; forward to K-REPEAT if so
; if not consider the second key map.
ex de,hl ; save kstate-0 in de
ld hl,KSTATE4 ; point to KSTATE-4
cp (hl) ; does the main key code match ?
jr z,K_REPEAT ; forward to K-REPEAT if so
; having excluded a repeating key we can now consider a new key.
; the second set is always examined before the first.
bit 7,(hl) ; is the key map free ?
jr nz,K_NEW ; forward to K-NEW if so.
ex de,hl ; bring back KSTATE-0
bit 7,(hl) ; is it free ?
ret z ; return if not.
; as we have a key but nowhere to put it yet.
; continue or jump to here if one of the buffers was free.
;; K-NEW
K_NEW:
ld e,a ; store key in E
ldi (hl),a ; place in free location
; advance to the interrupt counter
ldi (hl),0x05 ; and initialize counter to 5
; advance to the delay
ld a,(REPDEL) ; pick up the system variable REPDEL
ldi (hl),a ; and insert that for first repeat delay.
; advance to last location of state map.
ld c,(iy+MODE-IY0) ; pick up MODE (3 bytes)
ld d,(iy+FLAGS-IY0) ; pick up FLAGS (3 bytes)
push hl ; save state map location
; Note. could now have used, to avoid IY,
; ld l,$41; ld c,(hl); ld l,$3B; ld d,(hl).
; six and two threes of course.
call K_DECODE ; routine K-DECODE
pop hl ; restore map pointer
ld (hl),a ; put the decoded key in last location of map.
;; K-END
K_END:
ld (LAST_K),a ; update LASTK system variable.
set 5,(iy+FLAGS-IY0) ; update FLAGS - signal a new key.
ret ; return to interrupt routine.
; -----------------------
; THE 'REPEAT KEY' BRANCH
; -----------------------
; A possible repeat has been identified. HL addresses the raw key.
; The last location of the key map holds the decoded key from the first
; context. This could be a keyword and, with the exception of NOT a repeat
; is syntactically incorrect and not really desirable.
;; K-REPEAT
K_REPEAT:
inc hl ; increment the map pointer to second location.
ldi (hl),0x05 ; maintain interrupt counter at 5.
; now point to third location.
dec (hl) ; decrease the REPDEL value which is used to
; time the delay of a repeat key.
ret nz ; return if not yet zero.
ld a,(REPPER) ; fetch the system variable value REPPER.
ldi (hl),a ; for subsequent repeats REPPER will be used.
; advance
ld a,(hl) ; pick up the key decoded possibly in another
; context.
; Note. should compare with $A5 (RND) and make
; a simple return if this is a keyword.
; e.g. cp $a5; ret nc; (3 extra bytes)
jr K_END ; back to K-END
; ----------------------
; THE 'KEY-TEST' ROUTINE
; ----------------------
; also called from s-inkey$
; begin by testing for a shift with no other.
;; K-TEST
K_TEST:
ld b,d ; load most significant key to B
; will be $FF if not shift.
ld d,0x00 ; and reset D to index into main table
ld a,e ; load least significant key from E
cp 0x27 ; is it higher than 39d i.e. FF
ret nc ; return with just a shift (in B now)
cp 0x18 ; is it symbol shift ?
jr nz,K_MAIN ; forward to K-MAIN if not
; but we could have just symbol shift and no other
bit 7,b ; is other key $FF (ie not shift)
ret nz ; return with solitary symbol shift
;; K-MAIN
K_MAIN:
ld hl,MAIN_KEYS ; address: MAIN-KEYS
add hl,de ; add offset 0-38
ld a,(hl) ; pick up main key value
scf ; set carry flag
ret ; return (B has other key still)
; ----------------------------------
; THE 'KEYBOARD DECODING' SUBROUTINE
; ----------------------------------
; also called from s-inkey$
;; K-DECODE
K_DECODE:
ld a,e ; pick up the stored main key
cp 0x3A ; an arbitrary point between digits and letters
jr c,K_DIGIT ; forward to K-DIGIT with digits, space, enter.
dec c ; decrease MODE ( 0='KLC', 1='E', 2='G')
jp m,K_KLC_LET ; to K-KLC-LET if was zero
jr z,K_E_LET ; to K-E-LET if was 1 for extended letters.
; proceed with graphic codes.
; Note. should selectively drop return address if code > 'U' ($55).
; i.e. abort the KEYBOARD call.
; e.g. cp 'V'; jr c,addit; pop af ;pop af ;;addit etc. (6 extra bytes).
; (s-inkey$ never gets into graphics mode.)
;; addit
add a,0x4F ; add offset to augment 'A' to graphics A say.
ret ; return.
; Note. ( but [GRAPH] V gives RND, etc ).
; ---
; the jump was to here with extended mode with uppercase A-Z.
;; K-E-LET
K_E_LET:
ld hl,E_UNSHIFT-0x41 ; base address of E-UNSHIFT L022c.
; ( $01EB in standard ROM ).
inc b ; test B is it empty i.e. not a shift.
jr z,K_LOOK_UP ; forward to K-LOOK-UP if neither shift.
ld hl,EXT_SHIFT-0x41 ; Address: $0205 L0246-$41 EXT-SHIFT base
;; K-LOOK-UP
K_LOOK_UP:
ld d,0x00 ; prepare to index.
add hl,de ; add the main key value.
ld a,(hl) ; pick up other mode value.
ret ; return.
; ---
; the jump was here with mode = 0
;; K-KLC-LET
K_KLC_LET:
ld hl,SYM_CODES-0x41 ; prepare base of sym-codes
bit 0,b ; shift=$27 sym-shift=$18
jr z,K_LOOK_UP ; back to K-LOOK-UP with symbol-shift
bit 3,d ; test FLAGS is it 'K' mode (from OUT-CURS)
jr z,K_TOKENS ; skip to K-TOKENS if so
bit 3,(iy+FLAGS2-IY0) ; test FLAGS2 - consider CAPS LOCK ?
ret nz ; return if so with main code.
inc b ; is shift being pressed ?
; result zero if not
ret nz ; return if shift pressed.
add a,0x20 ; else convert the code to lower case.
ret ; return.
; ---
; the jump was here for tokens
;; K-TOKENS
K_TOKENS:
add a,0xA5 ; add offset to main code so that 'A'
; becomes 'NEW' etc.
ret ; return.
; ---
; the jump was here with digits, space, enter and symbol shift (< $xx)
;; K-DIGIT
K_DIGIT:
cp 0x30 ; is it '0' or higher ?
ret c ; return with space, enter and symbol-shift
dec c ; test MODE (was 0='KLC', 1='E', 2='G')
jp m,K_KLC_DGT ; jump to K-KLC-DGT if was 0.
jr nz,K_GRA_DGT ; forward to K-GRA-DGT if mode was 2.
; continue with extended digits 0-9.
ld hl,E_DIGITS-0x30 ; $0254 - base of E-DIGITS
bit 5,b ; test - shift=$27 sym-shift=$18
jr z,K_LOOK_UP ; to K-LOOK-UP if sym-shift
cp 0x38 ; is character '8' ?
jr nc,K_8___9 ; to K-8-&-9 if greater than '7'
sub 0x20 ; reduce to ink range $10-$17
inc b ; shift ?
ret z ; return if not.
add a,0x08 ; add 8 to give paper range $18 - $1F
ret ; return
; ---
; 89
;; K-8-&-9
K_8___9:
sub 0x36 ; reduce to 02 and 03 bright codes
inc b ; test if shift pressed.
ret z ; return if not.
add a,0xFE ; subtract 2 setting carry
ret ; to give 0 and 1 flash codes.
; ---
; graphics mode with digits
;; K-GRA-DGT
K_GRA_DGT:
ld hl,CTL_CODES-0x30 ; $0230 base address of CTL-CODES
cp 0x39 ; is key '9' ?
jr z,K_LOOK_UP ; back to K-LOOK-UP - changed to $0F, GRAPHICS.
cp 0x30 ; is key '0' ?
jr z,K_LOOK_UP ; back to K-LOOK-UP - changed to $0C, delete.
; for keys '0' - '7' we assign a mosaic character depending on shift.
and 0x07 ; convert character to number. 0 - 7.
add a,0x80 ; add offset - they start at $80
inc b ; destructively test for shift
ret z ; and return if not pressed.
xor 0x0F ; toggle bits becomes range $88-$8F
ret ; return.
; ---
; now digits in 'KLC' mode
;; K-KLC-DGT
K_KLC_DGT:
inc b ; return with digit codes if neither
ret z ; shift key pressed.
bit 5,b ; test for caps shift.
ld hl,CTL_CODES-0x30 ; prepare base of table CTL-CODES.
jr nz,K_LOOK_UP ; back to K-LOOK-UP if shift pressed.
; must have been symbol shift
sub 0x10 ; for ASCII most will now be correct
; on a standard typewriter.
cp 0x22 ; but '@' is not - see below.
jr z,K___CHAR ; forward to K-@-CHAR if so
cp 0x20 ; '_' is the other one that fails
ret nz ; return if not.
ld a,0x5F ; substitute ASCII '_'
ret ; return.
; ---
;; K-@-CHAR
K___CHAR:
ld a,0x40 ; substitute ASCII '@'
ret ; return.
; ------------------------------------------------------------------------
; The Spectrum Input character keys. One or two are abbreviated.
; From $00 Flash 0 to $FF COPY. The routine above has decoded all these.
; | 00 Fl0| 01 Fl1| 02 Br0| 03 Br1| 04 In0| 05 In1| 06 CAP| 07 EDT|
; | 08 LFT| 09 RIG| 0A DWN| 0B UP | 0C DEL| 0D ENT| 0E SYM| 0F GRA|
; | 10 Ik0| 11 Ik1| 12 Ik2| 13 Ik3| 14 Ik4| 15 Ik5| 16 Ik6| 17 Ik7|
; | 18 Pa0| 19 Pa1| 1A Pa2| 1B Pa3| 1C Pa4| 1D Pa5| 1E Pa6| 1F Pa7|
; | 20 SP | 21 ! | 22 " | 23 # | 24 $ | 25 % | 26 & | 27 ' |
; | 28 ( | 29 ) | 2A * | 2B + | 2C , | 2D - | 2E . | 2F / |
; | 30 0 | 31 1 | 32 2 | 33 3 | 34 4 | 35 5 | 36 6 | 37 7 |
; | 38 8 | 39 9 | 3A : | 3B ; | 3C < | 3D = | 3E > | 3F ? |
; | 40 @ | 41 A | 42 B | 43 C | 44 D | 45 E | 46 F | 47 G |
; | 48 H | 49 I | 4A J | 4B K | 4C L | 4D M | 4E N | 4F O |
; | 50 P | 51 Q | 52 R | 53 S | 54 T | 55 U | 56 V | 57 W |
; | 58 X | 59 Y | 5A Z | 5B [ | 5C \ | 5D ] | 5E ^ | 5F _ |
; | 60 £ | 61 a | 62 b | 63 c | 64 d | 65 e | 66 f | 67 g |
; | 68 h | 69 i | 6A j | 6B k | 6C l | 6D m | 6E n | 6F o |
; | 70 p | 71 q | 72 r | 73 s | 74 t | 75 u | 76 v | 77 w |
; | 78 x | 79 y | 7A z | 7B { | 7C | | 7D } | 7E ~ | 7F © |
; | 80 128| 81 129| 82 130| 83 131| 84 132| 85 133| 86 134| 87 135|
; | 88 136| 89 137| 8A 138| 8B 139| 8C 140| 8D 141| 8E 142| 8F 143|
; | 90 [A]| 91 [B]| 92 [C]| 93 [D]| 94 [E]| 95 [F]| 96 [G]| 97 [H]|
; | 98 [I]| 99 [J]| 9A [K]| 9B [L]| 9C [M]| 9D [N]| 9E [O]| 9F [P]|
; | A0 [Q]| A1 [R]| A2 [S]| A3 [T]| A4 [U]| A5 RND| A6 IK$| A7 PI |
; | A8 FN | A9 PNT| AA SC$| AB ATT| AC AT | AD TAB| AE VL$| AF COD|
; | B0 VAL| B1 LEN| B2 SIN| B3 COS| B4 TAN| B5 ASN| B6 ACS| B7 ATN|
; | B8 LN | B9 EXP| BA INT| BB SQR| BC SGN| BD ABS| BE PEK| BF IN |
; | C0 USR| C1 ST$| C2 CH$| C3 NOT| C4 BIN| C5 OR | C6 AND| C7 <= |
; | C8 >= | C9 <> | CA LIN| CB THN| CC TO | CD STP| CE DEF| CF CAT|
; | D0 FMT| D1 MOV| D2 ERS| D3 OPN| D4 CLO| D5 MRG| D6 VFY| D7 BEP|
; | D8 CIR| D9 INK| DA PAP| DB FLA| DC BRI| DD INV| DE OVR| DF OUT|
; | E0 LPR| E1 LLI| E2 STP| E3 REA| E4 DAT| E5 RES| E6 NEW| E7 BDR|
; | E8 CON| E9 DIM| EA REM| EB FOR| EC GTO| ED GSB| EE INP| EF LOA|
; | F0 LIS| F1 LET| F2 PAU| F3 NXT| F4 POK| F5 PRI| F6 PLO| F7 RUN|
; | F8 SAV| F9 RAN| FA IF | FB CLS| FC DRW| FD CLR| FE RET| FF CPY|
; Note that for simplicity, Sinclair have located all the control codes
; below the space character.
; ASCII DEL, $7F, has been made a copyright symbol.
; Also $60, '`', not used in BASIC but used in other languages, has been
; allocated the local currency symbol for the relevant country -
; £ in most Spectrums.
; ------------------------------------------------------------------------
;**********************************
;** Part 3. LOUDSPEAKER ROUTINES **
;**********************************
; Documented by Alvin Albrecht.
; ------------------------------
; Routine to control loudspeaker
; ------------------------------
; Outputs a square wave of given duration and frequency
; to the loudspeaker.
; Enter with: DE = #cycles - 1
; HL = tone period as described next
;
; The tone period is measured in T states and consists of
; three parts: a coarse part (H register), a medium part
; (bits 7..2 of L) and a fine part (bits 1..0 of L) which
; contribute to the waveform timing as follows:
;
; coarse medium fine
; duration of low = 118 + 1024*H + 16*(L>>2) + 4*(L&0x3)
; duration of hi = 118 + 1024*H + 16*(L>>2) + 4*(L&0x3)
; Tp = tone period = 236 + 2048*H + 32*(L>>2) + 8*(L&0x3)
; = 236 + 2048*H + 8*L = 236 + 8*HL
;
; As an example, to output five seconds of middle C (261.624 Hz):
; (a) Tone period = 1/261.624 = 3.822ms
; (b) Tone period in T-States = 3.822ms*fCPU = 13378
; where fCPU = clock frequency of the CPU = 3.5MHz
; © Find H and L for desired tone period:
; HL = (Tp - 236) / 8 = (13378 - 236) / 8 = 1643 = 0x066B
; (d) Tone duration in cycles = 5s/3.822ms = 1308 cycles
; DE = 1308 - 1 = 0x051B
;
; The resulting waveform has a duty ratio of exactly 50%.
;
;
;; BEEPER
BEEPER:
di ; Disable Interrupts so they don't disturb timing
ld a,l
srl l
srl l ; L = medium part of tone period
cpl
and 0x03 ; A = 3 - fine part of tone period
ld c,a
ld b,0x00
ld ix,BE_IX_3 ; Address: BE-IX+3
add ix,bc ; IX holds address of entry into the loop
; the loop will contain 0-3 NOPs, implementing
; the fine part of the tone period.
ld a,(BORDCR) ; BORDCR
and 0x38 ; bits 5..3 contain border colour
rrca ; border colour bits moved to 2..0
rrca ; to match border bits on port #FE
rrca
or 0x08 ; bit 3 set (tape output bit on port #FE)
; for loud sound output
; ; BE-IX+3
BE_IX_3:
nop ; (4) ; optionally executed NOPs for small
; adjustments to tone period
; ; BE-IX+2
BE_IX_2:
nop ; (4) ;
;; BE-IX+1
BE_IX_1:
nop ; (4) ;
;; BE-IX+0
BE_IX_0:
inc b ; (4) ;
inc c ; (4) ;
;; BE-H&L-LP
BE_H_L_LP:
dec c ; (4) ; timing loop for duration of
jr nz,BE_H_L_LP ; (12/7); high or low pulse of waveform
ld c,0x3F ; (7) ;
dec b ; (4) ;
jp nz,BE_H_L_LP ; (10) ; to BE-H&L-LP
xor 0x10 ; (7) ; toggle output beep bit
out (0xFE),a ; (11) ; output pulse
ld b,h ; (4) ; B = coarse part of tone period
ld c,a ; (4) ; save port #FE output byte
bit 4,a ; (8) ; if new output bit is high, go
jr nz,BE_AGAIN ; (12/7); to BE-AGAIN
ld a,d ; (4) ; one cycle of waveform has completed
or e ; (4) ; (low->low). if cycle countdown = 0
jr z,BE_END ; (12/7); go to BE-END
ld a,c ; (4) ; restore output byte for port #FE
ld c,l ; (4) ; C = medium part of tone period
dec de ; (6) ; decrement cycle count
jp (ix) ; (8) ; do another cycle
;; BE-AGAIN ; halfway through cycle
BE_AGAIN:
ld c,l ; (4) ; C = medium part of tone period
inc c ; (4) ; adds 16 cycles to make duration of high = duration of low
jp (ix) ; (8) ; do high pulse of tone
;; BE-END
BE_END:
ei ; Enable Interrupts
ret
; ------------------
; THE 'BEEP' COMMAND
; ------------------
; BASIC interface to BEEPER subroutine.
; Invoked in BASIC with:
; BEEP dur, pitch
; where dur = duration in seconds
; pitch = # of semitones above/below middle C
;
; Enter with: pitch on top of calculator stack
; duration next on calculator stack
;
;; beep
beep:
rst 0x28 ; ; FP-CALC
defb 0x31 ; ;duplicate ; duplicate pitch
defb 0x27 ; ;int ; convert to integer
defb 0xC0 ; ;st-mem-0 ; store integer pitch to memory 0
defb 0x03 ; ;subtract ; calculate fractional part of pitch = fp_pitch - int_pitch
defb 0x34 ; ;stk-data ; push constant
defb 0xEC ; ;Exponent: $7C, Bytes: 4 ; constant = 0.05762265
defb 0x6C,0x98,0x1F,0xF5
; ;($6C,$98,$1F,$F5)
defb 0x04 ; ;multiply ; compute:
defb 0xA1 ; ;stk-one ; 1 + 0.05762265 * fraction_part(pitch)
defb 0x0F ; ;addition
defb 0x38 ; ;end-calc ; leave on calc stack
ld hl,MEMBOT ; MEM-0: number stored here is in 16 bit integer format (pitch)
; 0, 0/FF (pos/neg), LSB, MSB, 0
; LSB/MSB is stored in two's complement
; In the following, the pitch is checked if it is in the range -128<=p<=127
ld a,(hl) ; First byte must be zero, otherwise
and a ; error in integer conversion
jr nz,REPORT_B ; to REPORT-B
inc hl
ldi c,(hl) ; C = pos/neg flag = 0/FF
ld b,(hl) ; B = LSB, two's complement
ld a,b
rla
sbc a,a ; A = 0/FF if B is pos/neg
cp c ; must be the same as C if the pitch is -128<=p<=127
jr nz,REPORT_B ; if no, error REPORT-B
inc hl ; if -128<=p<=127, MSB will be 0/FF if B is pos/neg
cp (hl) ; verify this
jr nz,REPORT_B ; if no, error REPORT-B
; now we know -128<=p<=127
ld a,b ; A = pitch + 60
add a,0x3C ; if -60<=pitch<=67,
jp p,BE_I_OK ; goto BE-i-OK
jp po,REPORT_B ; if pitch <= 67 goto REPORT-B
; lower bound of pitch set at -60
;; BE-I-OK ; here, -60<=pitch<=127
; and A=pitch+60 -> 0<=A<=187
BE_I_OK:
ld b,0xFA ; 6 octaves below middle C
;; BE-OCTAVE ; A=# semitones above 5 octaves below middle C
BE_OCTAVE:
inc b ; increment octave
sub 0x0C ; 12 semitones = one octave
jr nc,BE_OCTAVE ; to BE-OCTAVE
add a,0x0C ; A = # semitones above C (0-11)
push bc ; B = octave displacement from middle C, 2's complement: -5<=B<=10
ld hl,semi_tone ; Address: semi-tone
call LOC_MEM ; routine LOC-MEM
; HL = 5*A + $046E
call STACK_NUM ; routine STACK-NUM
; read FP value (freq) from semitone table (HL) and push onto calc stack
rst 0x28 ; ; FP-CALC
defb 0x04 ; ;multiply mult freq by 1 + 0.0576 * fraction_part(pitch) stacked earlier
; ; thus taking into account fractional part of pitch.
; ; the number 0.0576*frequency is the distance in Hz to the next
; ; note (verify with the frequencies recorded in the semitone
; ; table below) so that the fraction_part of the pitch does
; ; indeed represent a fractional distance to the next note.
defb 0x38 ; ;end-calc HL points to first byte of fp num on stack = middle frequency to generate
pop af ; A = octave displacement from middle C, 2's complement: -5<=A<=10
add a,(hl) ; increase exponent by A (equivalent to multiplying by 2^A)
ld (hl),a
rst 0x28 ; ; FP-CALC
defb 0xC0 ; ;st-mem-0 ; store frequency in memory 0
defb 0x02 ; ;delete ; remove from calc stack
defb 0x31 ; ;duplicate ; duplicate duration (seconds)
defb 0x38 ; ;end-calc
call FIND_INT1 ; routine FIND-INT1 ; FP duration to A
cp 0x0B ; if dur > 10 seconds,
jr nc,REPORT_B ; goto REPORT-B
;;; The following calculation finds the tone period for HL and the cycle count
;;; for DE expected in the BEEPER subroutine. From the example in the BEEPER comments,
;;;
;;; HL = ((fCPU / f) - 236) / 8 = fCPU/8/f - 236/8 = 437500/f -29.5
;;; DE = duration * frequency - 1
;;;
;;; Note the different constant (30.125) used in the calculation of HL
;;; below. This is probably an error.
rst 0x28 ; ; FP-CALC
defb 0xE0 ; ;get-mem-0 ; push frequency
defb 0x04 ; ;multiply ; result1: #cycles = duration * frequency
defb 0xE0 ; ;get-mem-0 ; push frequency
defb 0x34 ; ;stk-data ; push constant
defb 0x80 ; ;Exponent $93, Bytes: 3 ; constant = 437500
defb 0x43,0x55,0x9F,0x80
; ;($55,$9F,$80,$00)
defb 0x01 ; ;exchange ; frequency on top
defb 0x05 ; ;division ; 437500 / frequency
defb 0x34 ; ;stk-data ; push constant
defb 0x35 ; ;Exponent: $85, Bytes: 1 ; constant = 30.125
defb 0x71 ; ;($71,$00,$00,$00)
defb 0x03 ; ;subtract ; result2: tone_period(HL) = 437500 / freq - 30.125
defb 0x38 ; ;end-calc
call FIND_INT2 ; routine FIND-INT2
push bc ; BC = tone_period(HL)
call FIND_INT2 ; routine FIND-INT2, BC = #cycles to generate
pop hl ; HL = tone period
ld de,bc ; DE = #cycles
ld a,d
or e
ret z ; if duration = 0, skip BEEP and avoid 65536 cycle
; boondoggle that would occur next
dec de ; DE = #cycles - 1
jp BEEPER ; to BEEPER
; ---
;; REPORT-B
REPORT_B:
rst 0x08 ; ERROR-1
defb 0x0A ; Error Report: Integer out of range
; ---------------------
; THE 'SEMI-TONE' TABLE
; ---------------------
;
; Holds frequencies corresponding to semitones in middle octave.
; To move n octaves higher or lower, frequencies are multiplied by 2^n.
;; semi-tone five byte fp decimal freq note (middle)
semi_tone:
defb 0x89,0x02,0xD0,0x12,0x86
; 261.625565290 C
defb 0x89,0x0A,0x97,0x60,0x75
; 277.182631135 C#
defb 0x89,0x12,0xD5,0x17,0x1F
; 293.664768100 D
defb 0x89,0x1B,0x90,0x41,0x02
; 311.126983881 D#
defb 0x89,0x24,0xD0,0x53,0xCA
; 329.627557039 E
defb 0x89,0x2E,0x9D,0x36,0xB1
; 349.228231549 F
defb 0x89,0x38,0xFF,0x49,0x3E
; 369.994422674 F#
defb 0x89,0x43,0xFF,0x6A,0x73
; 391.995436072 G
defb 0x89,0x4F,0xA7,0x00,0x54
; 415.304697513 G#
defb 0x89,0x5C,0x00,0x00,0x00
; 440.000000000 A
defb 0x89,0x69,0x14,0xF6,0x24
; 466.163761616 A#
defb 0x89,0x76,0xF1,0x10,0x05
; 493.883301378 B
; "Music is the hidden mathematical endeavour of a soul unconscious it
; is calculating" - Gottfried Wilhelm Liebnitz 1646 - 1716
;****************************************
;** Part 4. CASSETTE HANDLING ROUTINES **
;****************************************
; These routines begin with the service routines followed by a single
; command entry point.
; The first of these service routines is a curiosity.
; -----------------------
; THE 'ZX81 NAME' ROUTINE
; -----------------------
; This routine fetches a filename in ZX81 format and is not used by the
; cassette handling routines in this ROM.
;; zx81-name
zx81_name:
call SCANNING ; routine SCANNING to evaluate expression.
ld a,(FLAGS) ; fetch system variable FLAGS.
add a,a ; test bit 7 - syntax, bit 6 - result type.
jp m,REPORT_C ; to REPORT-C if not string result
; 'Nonsense in BASIC'.
pop hl ; drop return address.
ret nc ; return early if checking syntax.
push hl ; re-save return address.
call STK_FETCH ; routine STK-FETCH fetches string parameters.
ld hl,de ; transfer start of filename
; to the HL register.
dec c ; adjust to point to last character and
ret m ; return if the null string.
; or multiple of 256!
add hl,bc ; find last character of the filename.
; and also clear carry.
set 7,(hl) ; invert it.
ret ; return.
; =========================================
;
; PORT 254 ($FE)
;
; spk mic { border }
; ___ ___ ___ ___ ___ ___ ___ ___
; PORT | | | | | | | | |
; 254 | | | | | | | | |
; $FE |___|___|___|___|___|___|___|___|
; 7 6 5 4 3 2 1 0
;
; ----------------------------------
; Save header and program/data bytes
; ----------------------------------
; This routine saves a section of data. It is called from SA-CTRL to save the
; seventeen bytes of header data. It is also the exit route from that routine
; when it is set up to save the actual data.
; On entry -
; HL points to start of data.
; IX points to descriptor.
; The accumulator is set to $00 for a header, $FF for data.
;; SA-BYTES
SA_BYTES:
ld hl,SA_LD_RET ; address: SA/LD-RET
push hl ; is pushed as common exit route.
; however there is only one non-terminal exit
; point.
ld hl,0x1F80 ; a timing constant H=$1F, L=$80
; inner and outer loop counters
; a five second lead-in is used for a header.
bit 7,a ; test one bit of accumulator.
; (AND A ?)
jr z,SA_FLAG ; skip to SA-FLAG if a header is being saved.
; else is data bytes and a shorter lead-in is used.
ld hl,0x0C98 ; another timing value H=$0C, L=$98.
; a two second lead-in is used for the data.
;; SA-FLAG
SA_FLAG:
ex af,af' ; save flag
inc de ; increase length by one.
dec ix ; decrease start.
di ; disable interrupts
ld a,0x02 ; select red for border, microphone bit on.
ld b,a ; also does as an initial slight counter value.
;; SA-LEADER
SA_LEADER:
djnz SA_LEADER ; self loop to SA-LEADER for delay.
; after initial loop, count is $A4 (or $A3)
out (0xFE),a ; output byte $02/$0D to tape port.
xor 0x0F ; switch from RED (mic on) to CYAN (mic off).
ld b,0xA4 ; hold count. also timed instruction.
dec l ; originally $80 or $98.
; but subsequently cycles 256 times.
jr nz,SA_LEADER ; back to SA-LEADER until L is zero.
; the outer loop is counted by H
dec b ; decrement count
dec h ; originally twelve or thirty-one.
jp p,SA_LEADER ; back to SA-LEADER until H becomes $FF
; now send a sync pulse. At this stage mic is off and A holds value
; for mic on.
; A sync pulse is much shorter than the steady pulses of the lead-in.
ld b,0x2F ; another short timed delay.
;; SA-SYNC-1
SA_SYNC_1:
djnz SA_SYNC_1 ; self loop to SA-SYNC-1
out (0xFE),a ; switch to mic on and red.
ld a,0x0D ; prepare mic off - cyan
ld b,0x37 ; another short timed delay.
;; SA-SYNC-2
SA_SYNC_2:
djnz SA_SYNC_2 ; self loop to SA-SYNC-2
out (0xFE),a ; output mic off, cyan border.
ld bc,0x3B0E ; B=$3B time(*), C=$0E, YELLOW, MIC OFF.
;
ex af,af' ; restore saved flag
; which is 1st byte to be saved.
ld l,a ; and transfer to L.
; the initial parity is A, $FF or $00.
jp SA_START ; JUMP forward to SA-START ->
; the mid entry point of loop.
; -------------------------
; During the save loop a parity byte is maintained in H.
; the save loop begins by testing if reduced length is zero and if so
; the final parity byte is saved reducing count to $FFFF.
;; SA-LOOP
SA_LOOP:
ld a,d ; fetch high byte
or e ; test against low byte.
jr z,SA_PARITY ; forward to SA-PARITY if zero.
ld l,(ix) ; load currently addressed byte to L.
;; SA-LOOP-P
SA_LOOP_P:
ld a,h ; fetch parity byte.
xor l ; exclusive or with new byte.
; -> the mid entry point of loop.
;; SA-START
SA_START:
ld h,a ; put parity byte in H.
ld a,0x01 ; prepare blue, mic=on.
scf ; set carry flag ready to rotate in.
jp SA_8_BITS ; JUMP forward to SA-8-BITS -8->
; ---
;; SA-PARITY
SA_PARITY:
ld l,h ; transfer the running parity byte to L and
jr SA_LOOP_P ; back to SA-LOOP-P
; to output that byte before quitting normally.
; ---
; The entry point to save yellow part of bit.
; A bit consists of a period with mic on and blue border followed by
; a period of mic off with yellow border.
; Note. since the DJNZ instruction does not affect flags, the zero flag is
; used to indicate which of the two passes is in effect and the carry
; maintains the state of the bit to be saved.
;; SA-BIT-2
SA_BIT_2:
ld a,c ; fetch 'mic on and yellow' which is
; held permanently in C.
bit 7,b ; set the zero flag. B holds $3E.
; The entry point to save 1 entire bit. For first bit B holds $3B(*).
; Carry is set if saved bit is 1. zero is reset NZ on entry.
;; SA-BIT-1
SA_BIT_1:
djnz SA_BIT_1 ; self loop for delay to SA-BIT-1
jr nc,SA_OUT ; forward to SA-OUT if bit is 0.
; but if bit is 1 then the mic state is held for longer.
ld b,0x42 ; set timed delay. (66 decimal)
;; SA-SET
SA_SET:
djnz SA_SET ; self loop to SA-SET
; (roughly an extra 66*13 clock cycles)
;; SA-OUT
SA_OUT:
out (0xFE),a ; blue and mic on OR yellow and mic off.
ld b,0x3E ; set up delay
jr nz,SA_BIT_2 ; back to SA-BIT-2 if zero reset NZ (first pass)
; proceed when the blue and yellow bands have been output.
dec b ; change value $3E to $3D.
xor a ; clear carry flag (ready to rotate in).
inc a ; reset zero flag i.e. NZ.
; -8->
;; SA-8-BITS
SA_8_BITS:
rl l ; rotate left through carry
; C<76543210<C
jp nz,SA_BIT_1 ; JUMP back to SA-BIT-1
; until all 8 bits done.
; when the initial set carry is passed out again then a byte is complete.
dec de ; decrease length
inc ix ; increase byte pointer
ld b,0x31 ; set up timing.
ld a,0x7F ; test the space key and
in a,(0xFE) ; return to common exit (to restore border)
rra ; if a space is pressed
ret nc ; return to SA/LD-RET. - - >
; now test if byte counter has reached $FFFF.
ld a,d ; fetch high byte
inc a ; increment.
jp nz,SA_LOOP ; JUMP to SA-LOOP if more bytes.
ld b,0x3B ; a final delay.
;; SA-DELAY
SA_DELAY:
djnz SA_DELAY ; self loop to SA-DELAY
ret ; return - - >
; ------------------------------
; THE 'SAVE/LOAD RETURN' ROUTINE
; ------------------------------
; The address of this routine is pushed on the stack prior to any load/save
; operation and it handles normal completion with the restoration of the
; border and also abnormal termination when the break key, or to be more
; precise the space key is pressed during a tape operation.
;
; - - >
;; SA/LD-RET
SA_LD_RET:
push af ; preserve accumulator throughout.
ld a,(BORDCR) ; fetch border colour from BORDCR.
and 0x38 ; mask off paper bits.
rrca ; rotate
rrca ; to the
rrca ; range 0-7.
out (0xFE),a ; change the border colour.
ld a,0x7F ; read from port address $7FFE the
in a,(0xFE) ; row with the space key at outside.
rra ; test for space key pressed.
ei ; enable interrupts
jr c,SA_LD_END ; forward to SA/LD-END if not
;; REPORT-Da
REPORT_Da:
rst 0x08 ; ERROR-1
defb 0x0C ; Error Report: BREAK - CONT repeats
; ---
;; SA/LD-END
SA_LD_END:
pop af ; restore the accumulator.
ret ; return.
; ------------------------------------
; Load header or block of information
; ------------------------------------
; This routine is used to load bytes and on entry A is set to $00 for a
; header or to $FF for data. IX points to the start of receiving location
; and DE holds the length of bytes to be loaded. If, on entry the carry flag
; is set then data is loaded, if reset then it is verified.
;; LD-BYTES
LD_BYTES:
inc d ; reset the zero flag without disturbing carry.
ex af,af' ; preserve entry flags.
dec d ; restore high byte of length.
di ; disable interrupts
ld a,0x0F ; make the border white and mic off.
out (0xFE),a ; output to port.
ld hl,SA_LD_RET ; Address: SA/LD-RET
push hl ; is saved on stack as terminating routine.
; the reading of the EAR bit (D6) will always be preceded by a test of the
; space key (D0), so store the initial post-test state.
in a,(0xFE) ; read the ear state - bit 6.
rra ; rotate to bit 5.
and 0x20 ; isolate this bit.
or 0x02 ; combine with red border colour.
ld c,a ; and store initial state long-term in C.
cp a ; set the zero flag.
;
;; LD-BREAK
LD_BREAK:
ret nz ; return if at any time space is pressed.
;; LD-START
LD_START:
call LD_EDGE_1 ; routine LD-EDGE-1
jr nc,LD_BREAK ; back to LD-BREAK with time out and no
; edge present on tape.
; but continue when a transition is found on tape.
ld hl,0x0415 ; set up 16-bit outer loop counter for
; approx 1 second delay.
;; LD-WAIT
LD_WAIT:
djnz LD_WAIT ; self loop to LD-WAIT (for 256 times)
dec hl ; decrease outer loop counter.
ld a,h ; test for
or l ; zero.
jr nz,LD_WAIT ; back to LD-WAIT, if not zero, with zero in B.
; continue after delay with H holding zero and B also.
; sample 256 edges to check that we are in the middle of a lead-in section.
call LD_EDGE_2 ; routine LD-EDGE-2
jr nc,LD_BREAK ; back to LD-BREAK
; if no edges at all.
;; LD-LEADER
LD_LEADER:
ld b,0x9C ; set timing value.
call LD_EDGE_2 ; routine LD-EDGE-2
jr nc,LD_BREAK ; back to LD-BREAK if time-out
ld a,0xC6 ; two edges must be spaced apart.
cp b ; compare
jr nc,LD_START ; back to LD-START if too close together for a
; lead-in.
inc h ; proceed to test 256 edged sample.
jr nz,LD_LEADER ; back to LD-LEADER while more to do.
; sample indicates we are in the middle of a two or five second lead-in.
; Now test every edge looking for the terminal sync signal.
;; LD-SYNC
LD_SYNC:
ld b,0xC9 ; initial timing value in B.
call LD_EDGE_1 ; routine LD-EDGE-1
jr nc,LD_BREAK ; back to LD-BREAK with time-out.
ld a,b ; fetch augmented timing value from B.
cp 0xD4 ; compare
jr nc,LD_SYNC ; back to LD-SYNC if gap too big, that is,
; a normal lead-in edge gap.
; but a short gap will be the sync pulse.
; in which case another edge should appear before B rises to $FF
call LD_EDGE_1 ; routine LD-EDGE-1
ret nc ; return with time-out.
; proceed when the sync at the end of the lead-in is found.
; We are about to load data so change the border colours.
ld a,c ; fetch long-term mask from C
xor 0x03 ; and make blue/yellow.
ld c,a ; store the new long-term byte.
ld h,0x00 ; set up parity byte as zero.
ld b,0xB0 ; timing.
jr LD_MARKER ; forward to LD-MARKER
; the loop mid entry point with the alternate
; zero flag reset to indicate first byte
; is discarded.
; --------------
; the loading loop loads each byte and is entered at the mid point.
;; LD-LOOP
LD_LOOP:
ex af,af' ; restore entry flags and type in A.
jr nz,LD_FLAG ; forward to LD-FLAG if awaiting initial flag
; which is to be discarded.
jr nc,LD_VERIFY ; forward to LD-VERIFY if not to be loaded.
ld (ix),l ; place loaded byte at memory location.
jr LD_NEXT ; forward to LD-NEXT
; ---
;; LD-FLAG
LD_FLAG:
rl c ; preserve carry (verify) flag in long-term
; state byte. Bit 7 can be lost.
xor l ; compare type in A with first byte in L.
ret nz ; return if no match e.g. CODE vs. DATA.
; continue when data type matches.
ld a,c ; fetch byte with stored carry
rra ; rotate it to carry flag again
ld c,a ; restore long-term port state.
inc de ; increment length ??
jr LD_DEC ; forward to LD-DEC.
; but why not to location after ?
; ---
; for verification the byte read from tape is compared with that in memory.
;; LD-VERIFY
LD_VERIFY:
ld a,(ix) ; fetch byte from memory.
xor l ; compare with that on tape
ret nz ; return if not zero.
;; LD-NEXT
LD_NEXT:
inc ix ; increment byte pointer.
;; LD-DEC
LD_DEC:
dec de ; decrement length.
ex af,af' ; store the flags.
ld b,0xB2 ; timing.
; when starting to read 8 bits the receiving byte is marked with bit at right.
; when this is rotated out again then 8 bits have been read.
;; LD-MARKER
LD_MARKER:
ld l,0x01 ; initialize as %00000001
;; LD-8-BITS
LD_8_BITS:
call LD_EDGE_2 ; routine LD-EDGE-2 increments B relative to
; gap between 2 edges.
ret nc ; return with time-out.
ld a,0xCB ; the comparison byte.
cp b ; compare to incremented value of B.
; if B is higher then bit on tape was set.
; if <= then bit on tape is reset.
rl l ; rotate the carry bit into L.
ld b,0xB0 ; reset the B timer byte.
jp nc,LD_8_BITS ; JUMP back to LD-8-BITS
; when carry set then marker bit has been passed out and byte is complete.
ld a,h ; fetch the running parity byte.
xor l ; include the new byte.
ld h,a ; and store back in parity register.
ld a,d ; check length of
or e ; expected bytes.
jr nz,LD_LOOP ; back to LD-LOOP
; while there are more.
; when all bytes loaded then parity byte should be zero.
ld a,h ; fetch parity byte.
cp 0x01 ; set carry if zero.
ret ; return
; in no carry then error as checksum disagrees.
; -------------------------
; Check signal being loaded
; -------------------------
; An edge is a transition from one mic state to another.
; More specifically a change in bit 6 of value input from port $FE.
; Graphically it is a change of border colour, say, blue to yellow.
; The first entry point looks for two adjacent edges. The second entry point
; is used to find a single edge.
; The B register holds a count, up to 256, within which the edge (or edges)
; must be found. The gap between two edges will be more for a '1' than a '0'
; so the value of B denotes the state of the bit (two edges) read from tape.
; ->
;; LD-EDGE-2
LD_EDGE_2:
call LD_EDGE_1 ; call routine LD-EDGE-1 below.
ret nc ; return if space pressed or time-out.
; else continue and look for another adjacent
; edge which together represent a bit on the
; tape.
; ->
; this entry point is used to find a single edge from above but also
; when detecting a read-in signal on the tape.
;; LD-EDGE-1
LD_EDGE_1:
ld a,0x16 ; a delay value of twenty two.
;; LD-DELAY
LD_DELAY:
dec a ; decrement counter
jr nz,LD_DELAY ; loop back to LD-DELAY 22 times.
and a ; clear carry.
;; LD-SAMPLE
LD_SAMPLE:
inc b ; increment the time-out counter.
ret z ; return with failure when $FF passed.
ld a,0x7F ; prepare to read keyboard and EAR port
in a,(0xFE) ; row $7FFE. bit 6 is EAR, bit 0 is SPACE key.
rra ; test outer key the space. (bit 6 moves to 5)
ret nc ; return if space pressed. >>>
xor c ; compare with initial long-term state.
and 0x20 ; isolate bit 5
jr z,LD_SAMPLE ; back to LD-SAMPLE if no edge.
; but an edge, a transition of the EAR bit, has been found so switch the
; long-term comparison byte containing both border colour and EAR bit.
ld a,c ; fetch comparison value.
cpl ; switch the bits
ld c,a ; and put back in C for long-term.
and 0x07 ; isolate new colour bits.
or 0x08 ; set bit 3 - MIC off.
out (0xFE),a ; send to port to effect the change of colour.
scf ; set carry flag signaling edge found within
; time allowed.
ret ; return.
; ---------------------------------
; Entry point for all tape commands
; ---------------------------------
; This is the single entry point for the four tape commands.
; The routine first determines in what context it has been called by examining
; the low byte of the Syntax table entry which was stored in T_ADDR.
; Subtracting $EO (the present arrangement) gives a value of
; $00 - SAVE
; $01 - LOAD
; $02 - VERIFY
; $03 - MERGE
; As with all commands the address STMT-RET is on the stack.
;; SAVE-ETC
SAVE_ETC:
pop af ; discard address STMT-RET.
ld a,(T_ADDR) ; fetch T_ADDR
; Now reduce the low byte of the Syntax table entry to give command.
; Note. For ZASM use SUB $E0 as next instruction.
L0609:
sub +(P_SAVE + 1) % 256 ; subtract the known offset.
; ( is SUB $E0 in standard ROM )
ld (T_ADDR),a ; and put back in T_ADDR as 0,1,2, or 3
; for future reference.
call EXPT_EXP ; routine EXPT-EXP checks that a string
; expression follows and stacks the
; parameters in run-time.
call SYNTAX_Z ; routine SYNTAX-Z
jr z,SA_DATA ; forward to SA-DATA if checking syntax.
ld bc,0x0011 ; presume seventeen bytes for a header.
ld a,(T_ADDR) ; fetch command from T_ADDR.
and a ; test for zero - SAVE.
jr z,SA_SPACE ; forward to SA-SPACE if so.
ld c,0x22 ; else double length to thirty four.
;; SA-SPACE
SA_SPACE:
rst 0x30 ; BC-SPACES creates 17/34 bytes in workspace.
push de ; transfer the start of new space to
pop ix ; the available index register.
; ten spaces are required for the default filename but it is simpler to
; overwrite the first file-type indicator byte as well.
ld b,0x0B ; set counter to eleven.
ld a,0x20 ; prepare a space.
;; SA-BLANK
SA_BLANK:
ldi (de),a ; set workspace location to space.
; next location.
djnz SA_BLANK ; loop back to SA-BLANK till all eleven done.
ld (ix+0x01),0xFF ; set first byte of ten character filename
; to $FF as a default to signal null string.
call STK_FETCH ; routine STK-FETCH fetches the filename
; parameters from the calculator stack.
; length of string in BC.
; start of string in DE.
ld hl,0xFFF6 ; prepare the value minus ten.
dec bc ; decrement length.
; ten becomes nine, zero becomes $FFFF.
add hl,bc ; trial addition.
inc bc ; restore true length.
jr nc,SA_NAME ; forward to SA-NAME if length is one to ten.
; the filename is more than ten characters in length or the null string.
ld a,(T_ADDR) ; fetch command from T_ADDR.
and a ; test for zero - SAVE.
jr nz,SA_NULL ; forward to SA-NULL if not the SAVE command.
; but no more than ten characters are allowed for SAVE.
; The first ten characters of any other command parameter are acceptable.
; Weird, but necessary, if saving to sectors.
; Note. the golden rule that there are no restriction on anything is broken.
;; REPORT-Fa
REPORT_Fa:
rst 0x08 ; ERROR-1
defb 0x0E ; Error Report: Invalid file name
; continue with LOAD, MERGE, VERIFY and also SAVE within ten character limit.
;; SA-NULL
SA_NULL:
ld a,b ; test length of filename
or c ; for zero.
jr z,SA_DATA ; forward to SA-DATA if so using the 255
; indicator followed by spaces.
ld bc,0x000A ; else trim length to ten.
; other paths rejoin here with BC holding length in range 1 - 10.
;; SA-NAME
SA_NAME:
ld hl,ix ; push start of file descriptor.
; and pop into HL.
inc hl ; HL now addresses first byte of filename.
ex de,hl ; transfer destination address to DE, start
; of string in command to HL.
ldir ; copy up to ten bytes
; if less than ten then trailing spaces follow.
; the case for the null string rejoins here.
;; SA-DATA
SA_DATA:
rst 0x18 ; GET-CHAR
cp 0xE4 ; is character after filename the token 'DATA' ?
jr nz,SA_SCR_ ; forward to SA-SCR$ to consider SCREEN$ if
; not.
; continue to consider DATA.
ld a,(T_ADDR) ; fetch command from T_ADDR
cp 0x03 ; is it 'VERIFY' ?
jp z,REPORT_C ; jump forward to REPORT-C if so.
; 'Nonsense in BASIC'
; VERIFY "d" DATA is not allowed.
; continue with SAVE, LOAD, MERGE of DATA.
rst 0x20 ; NEXT-CHAR
call LOOK_VARS ; routine LOOK-VARS searches variables area
; returning with carry reset if found or
; checking syntax.
set 7,c ; this converts a simple string to a
; string array. The test for an array or string
; comes later.
jr nc,SA_V_OLD ; forward to SA-V-OLD if variable found.
ld hl,0x0000 ; set destination to zero as not fixed.
ld a,(T_ADDR) ; fetch command from T_ADDR
dec a ; test for 1 - LOAD
jr z,SA_V_NEW ; forward to SA-V-NEW with LOAD DATA.
; to load a new array.
; otherwise the variable was not found in run-time with SAVE/MERGE.
;; REPORT-2a
REPORT_2a:
rst 0x08 ; ERROR-1
defb 0x01 ; Error Report: Variable not found
; continue with SAVE/LOAD DATA
;; SA-V-OLD
SA_V_OLD:
jp nz,REPORT_C ; to REPORT-C if not an array variable.
; or erroneously a simple string.
; 'Nonsense in BASIC'
call SYNTAX_Z ; routine SYNTAX-Z
jr z,SA_DATA_1 ; forward to SA-DATA-1 if checking syntax.
inc hl ; step past single character variable name.
ld a,(hl) ; fetch low byte of length.
ld (ix+0x0B),a ; place in descriptor.
inc hl ; point to high byte.
ld a,(hl) ; and transfer that
ld (ix+0x0C),a ; to descriptor.
inc hl ; increase pointer within variable.
;; SA-V-NEW
SA_V_NEW:
ld (ix+0x0E),c ; place character array name in header.
ld a,0x01 ; default to type numeric.
bit 6,c ; test result from look-vars.
jr z,SA_V_TYPE ; forward to SA-V-TYPE if numeric.
inc a ; set type to 2 - string array.
;; SA-V-TYPE
SA_V_TYPE:
ld (ix),a ; place type 0, 1 or 2 in descriptor.
;; SA-DATA-1
SA_DATA_1:
ex de,hl ; save var pointer in DE
rst 0x20 ; NEXT-CHAR
cp 0x29 ; is character ')' ?
jr nz,SA_V_OLD ; back if not to SA-V-OLD to report
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR advances character address.
call CHECK_END ; routine CHECK-END errors if not end of
; the statement.
ex de,hl ; bring back variables data pointer.
jp SA_ALL ; jump forward to SA-ALL
; ---
; the branch was here to consider a 'SCREEN$', the display file.
;; SA-SCR$
SA_SCR_:
cp 0xAA ; is character the token 'SCREEN$' ?
jr nz,SA_CODE ; forward to SA-CODE if not.
ld a,(T_ADDR) ; fetch command from T_ADDR
cp 0x03 ; is it MERGE ?
jp z,REPORT_C ; jump to REPORT-C if so.
; 'Nonsense in BASIC'
; continue with SAVE/LOAD/VERIFY SCREEN$.
rst 0x20 ; NEXT-CHAR
call CHECK_END ; routine CHECK-END errors if not at end of
; statement.
; continue in runtime.
ld (ix+0x0B),0x00 ; set descriptor length
ld (ix+0x0C),0x1B ; to $1b00 to include bitmaps and attributes.
ld hl,0x4000 ; set start to display file start.
ld (ix+0x0D),hl ; place start in
; the descriptor.
jr SA_TYPE_3 ; forward to SA-TYPE-3
; ---
; the branch was here to consider CODE.
;; SA-CODE
SA_CODE:
cp 0xAF ; is character the token 'CODE' ?
jr nz,SA_LINE ; forward if not to SA-LINE to consider an
; auto-started BASIC program.
ld a,(T_ADDR) ; fetch command from T_ADDR
cp 0x03 ; is it MERGE ?
jp z,REPORT_C ; jump forward to REPORT-C if so.
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR advances character address.
call PR_ST_END ; routine PR-ST-END checks if a carriage
; return or ':' follows.
jr nz,SA_CODE_1 ; forward to SA-CODE-1 if there are parameters.
ld a,(T_ADDR) ; else fetch the command from T_ADDR.
and a ; test for zero - SAVE without a specification.
jp z,REPORT_C ; jump to REPORT-C if so.
; 'Nonsense in BASIC'
; for LOAD/VERIFY put zero on stack to signify handle at location saved from.
call USE_ZERO ; routine USE-ZERO
jr SA_CODE_2 ; forward to SA-CODE-2
; ---
; if there are more characters after CODE expect start and possibly length.
;; SA-CODE-1
SA_CODE_1:
call EXPT_1NUM ; routine EXPT-1NUM checks for numeric
; expression and stacks it in run-time.
rst 0x18 ; GET-CHAR
cp 0x2C ; does a comma follow ?
jr z,SA_CODE_3 ; forward if so to SA-CODE-3
; else allow saved code to be loaded to a specified address.
ld a,(T_ADDR) ; fetch command from T_ADDR.
and a ; is the command SAVE which requires length ?
jp z,REPORT_C ; jump to REPORT-C if so.
; 'Nonsense in BASIC'
; the command LOAD code may rejoin here with zero stacked as start.
;; SA-CODE-2
SA_CODE_2:
call USE_ZERO ; routine USE-ZERO stacks zero for length.
jr SA_CODE_4 ; forward to SA-CODE-4
; ---
; the branch was here with SAVE CODE start,
;; SA-CODE-3
SA_CODE_3:
rst 0x20 ; NEXT-CHAR advances character address.
call EXPT_1NUM ; routine EXPT-1NUM checks for expression
; and stacks in run-time.
; paths converge here and nothing must follow.
;; SA-CODE-4
SA_CODE_4:
call CHECK_END ; routine CHECK-END errors with extraneous
; characters and quits if checking syntax.
; in run-time there are two 16-bit parameters on the calculator stack.
call FIND_INT2 ; routine FIND-INT2 gets length.
ld (ix+0x0B),bc ; place length
; in descriptor.
call FIND_INT2 ; routine FIND-INT2 gets start.
ld (ix+0x0D),bc ; place start
; in descriptor.
ld hl,bc ; transfer the
; start to HL also.
;; SA-TYPE-3
SA_TYPE_3:
ld (ix),0x03 ; place type 3 - code in descriptor.
jr SA_ALL ; forward to SA-ALL.
; ---
; the branch was here with BASIC to consider an optional auto-start line
; number.
;; SA-LINE
SA_LINE:
cp 0xCA ; is character the token 'LINE' ?
jr z,SA_LINE_1 ; forward to SA-LINE-1 if so.
; else all possibilities have been considered and nothing must follow.
call CHECK_END ; routine CHECK-END
; continue in run-time to save BASIC without auto-start.
ld (ix+0x0E),0x80 ; place high line number in descriptor to
; disable auto-start.
jr SA_TYPE_0 ; forward to SA-TYPE-0 to save program.
; ---
; the branch was here to consider auto-start.
;; SA-LINE-1
SA_LINE_1:
ld a,(T_ADDR) ; fetch command from T_ADDR
and a ; test for SAVE.
jp nz,REPORT_C ; jump forward to REPORT-C with anything else.
; 'Nonsense in BASIC'
;
rst 0x20 ; NEXT-CHAR
call EXPT_1NUM ; routine EXPT-1NUM checks for numeric
; expression and stacks in run-time.
call CHECK_END ; routine CHECK-END quits if syntax path.
call FIND_INT2 ; routine FIND-INT2 fetches the numeric
; expression.
ld (ix+0x0D),bc ; place the auto-start
; line number in the descriptor.
; Note. this isn't checked, but is subsequently handled by the system.
; If the user typed 40000 instead of 4000 then it won't auto-start
; at line 4000, or indeed, at all.
; continue to save program and any variables.
;; SA-TYPE-0
SA_TYPE_0:
ld (ix),0x00 ; place type zero - program in descriptor.
ld hl,(E_LINE) ; fetch E_LINE to HL.
ld de,(PROG) ; fetch PROG to DE.
scf ; set carry flag to calculate from end of
; variables E_LINE -1.
sbc hl,de ; subtract to give total length.
ld (ix+0x0B),hl ; place total length
; in descriptor.
ld hl,(VARS) ; load HL from system variable VARS
sbc hl,de ; subtract to give program length.
ld (ix+0x0F),hl ; place length of program
; in the descriptor.
ex de,hl ; start to HL, length to DE.
;; SA-ALL
SA_ALL:
ld a,(T_ADDR) ; fetch command from T_ADDR
and a ; test for zero - SAVE.
jp z,SA_CONTRL ; jump forward to SA-CONTRL with SAVE ->
; ---
; continue with LOAD, MERGE and VERIFY.
push hl ; save start.
ld bc,0x0011 ; prepare to add seventeen
add ix,bc ; to point IX at second descriptor.
;; LD-LOOK-H
LD_LOOK_H:
push ix ; save IX
ld de,0x0011 ; seventeen bytes
xor a ; reset zero flag
scf ; set carry flag
call LD_BYTES ; routine LD-BYTES loads a header from tape
; to second descriptor.
pop ix ; restore IX.
jr nc,LD_LOOK_H ; loop back to LD-LOOK-H until header found.
ld a,0xFE ; select system channel 'S'
call CHAN_OPEN ; routine CHAN-OPEN opens it.
ld (iy+SCR_CT-IY0),0x03 ; set SCR_CT to 3 lines.
ld c,0x80 ; C has bit 7 set to indicate type mismatch as
; a default startpoint.
ld a,(ix) ; fetch loaded header type to A
cp (ix-0x11) ; compare with expected type.
jr nz,LD_TYPE ; forward to LD-TYPE with mis-match.
ld c,0xF6 ; set C to minus ten - will count characters
; up to zero.
;; LD-TYPE
LD_TYPE:
cp 0x04 ; check if type in acceptable range 0 - 3.
jr nc,LD_LOOK_H ; back to LD-LOOK-H with 4 and over.
; else A indicates type 0-3.
ld de,tape_msgs_2-0x01 ; address base of last 4 tape messages
push bc ; save BC
call PO_MSG ; routine PO-MSG outputs relevant message.
; Note. all messages have a leading newline.
pop bc ; restore BC
push ix ; transfer IX,
pop de ; the 2nd descriptor, to DE.
ld hl,0xFFF0 ; prepare minus seventeen.
add hl,de ; add to point HL to 1st descriptor.
ld b,0x0A ; the count will be ten characters for the
; filename.
ld a,(hl) ; fetch first character and test for
inc a ; value 255.
jr nz,LD_NAME ; forward to LD-NAME if not the wildcard.
; but if it is the wildcard, then add ten to C which is minus ten for a type
; match or -128 for a type mismatch. Although characters have to be counted
; bit 7 of C will not alter from state set here.
ld a,c ; transfer $F6 or $80 to A
add a,b ; add $0A
ld c,a ; place result, zero or -118, in C.
; At this point we have either a type mismatch, a wildcard match or ten
; characters to be counted. The characters must be shown on the screen.
;; LD-NAME
LD_NAME:
inc de ; address next input character
ld a,(de) ; fetch character
cp (hl) ; compare to expected
inc hl ; address next expected character
jr nz,LD_CH_PR ; forward to LD-CH-PR with mismatch
inc c ; increment matched character count
;; LD-CH-PR
LD_CH_PR:
rst 0x10 ; PRINT-A prints character
djnz LD_NAME ; loop back to LD-NAME for ten characters.
; if ten characters matched and the types previously matched then C will
; now hold zero.
bit 7,c ; test if all matched
jr nz,LD_LOOK_H ; back to LD-LOOK-H if not
; else print a terminal carriage return.
ld a,0x0D ; prepare carriage return.
rst 0x10 ; PRINT-A outputs it.
; The various control routines for LOAD, VERIFY and MERGE are executed
; during the one-second gap following the header on tape.
pop hl ; restore xx
ld a,(ix) ; fetch incoming type
cp 0x03 ; compare with CODE
jr z,VR_CONTRL ; forward to VR-CONTRL if it is CODE.
; type is a program or an array.
ld a,(T_ADDR) ; fetch command from T_ADDR
dec a ; was it LOAD ?
jp z,LD_CONTRL ; JUMP forward to LD-CONTRL if so to
; load BASIC or variables.
cp 0x02 ; was command MERGE ?
jp z,ME_CONTRL ; jump forward to ME-CONTRL if so.
; else continue into VERIFY control routine to verify.
; ----------------------------
; THE 'VERIFY CONTROL' ROUTINE
; ----------------------------
; There are two branches to this routine.
; 1) From above to verify a program or array
; 2) from earlier with no carry to load or verify code.
;; VR-CONTRL
VR_CONTRL:
push hl ; save pointer to data.
ld hl,(ix-0x06) ; fetch length of old data
; to HL.
ld de,(ix+0x0B) ; fetch length of new data
; to DE.
ld a,h ; check length of old
or l ; for zero.
jr z,VR_CONT_1 ; forward to VR-CONT-1 if length unspecified
; e.g. LOAD "x" CODE
; as opposed to, say, LOAD 'x' CODE 32768,300.
sbc hl,de ; subtract the two lengths.
jr c,REPORT_R ; forward to REPORT-R if the length on tape is
; larger than that specified in command.
; 'Tape loading error'
jr z,VR_CONT_1 ; forward to VR-CONT-1 if lengths match.
; a length on tape shorter than expected is not allowed for CODE
ld a,(ix) ; else fetch type from tape.
cp 0x03 ; is it CODE ?
jr nz,REPORT_R ; forward to REPORT-R if so
; 'Tape loading error'
;; VR-CONT-1
VR_CONT_1:
pop hl ; pop pointer to data
ld a,h ; test for zero
or l ; e.g. LOAD 'x' CODE
jr nz,VR_CONT_2 ; forward to VR-CONT-2 if destination specified.
ld hl,(ix+0x0D) ; else use the destination in the header
; and load code at address saved from.
;; VR-CONT-2
VR_CONT_2:
ld ix,hl ; push pointer to start of data block.
; transfer to IX.
ld a,(T_ADDR) ; fetch reduced command from T_ADDR
cp 0x02 ; is it VERIFY ?
scf ; prepare a set carry flag
jr nz,VR_CONT_3 ; skip to VR-CONT-3 if not
and a ; clear carry flag for VERIFY so that
; data is not loaded.
;; VR-CONT-3
VR_CONT_3:
ld a,0xFF ; signal data block to be loaded
; -----------------
; Load a data block
; -----------------
; This routine is called from 3 places other than above to load a data block.
; In all cases the accumulator is first set to $FF so the routine could be
; called at the previous instruction.
;; LD-BLOCK
LD_BLOCK:
call LD_BYTES ; routine LD-BYTES
ret c ; return if successful.
;; REPORT-R
REPORT_R:
rst 0x08 ; ERROR-1
defb 0x1A ; Error Report: Tape loading error
; --------------------------
; THE 'LOAD CONTROL' ROUTINE
; --------------------------
; This branch is taken when the command is LOAD with type 0, 1 or 2.
;; LD-CONTRL
LD_CONTRL:
ld de,(ix+0x0B) ; fetch length of found data block
; from 2nd descriptor.
push hl ; save destination
ld a,h ; test for zero
or l
jr nz,LD_CONT_1 ; forward if not to LD-CONT-1
inc de ; increase length
inc de ; for letter name
inc de ; and 16-bit length
ex de,hl ; length to HL,
jr LD_CONT_2 ; forward to LD-CONT-2
; ---
;; LD-CONT-1
LD_CONT_1:
ld hl,(ix-0x06) ; fetch length from
; the first header.
ex de,hl
scf ; set carry flag
sbc hl,de
jr c,LD_DATA ; to LD-DATA
;; LD-CONT-2
LD_CONT_2:
ld de,0x0005 ; allow overhead of five bytes.
add hl,de ; add in the difference in data lengths.
ld bc,hl ; transfer to
; the BC register pair
call TEST_ROOM ; routine TEST-ROOM fails if not enough room.
;; LD-DATA
LD_DATA:
pop hl ; pop destination
ld a,(ix) ; fetch type 0, 1 or 2.
and a ; test for program and variables.
jr z,LD_PROG ; forward if so to LD-PROG
; the type is a numeric or string array.
ld a,h ; test the destination for zero
or l ; indicating variable does not already exist.
jr z,LD_DATA_1 ; forward if so to LD-DATA-1
; else the destination is the first dimension within the array structure
dec hl ; address high byte of total length
ldd b,(hl) ; transfer to B.
; address low byte of total length.
ldd c,(hl) ; transfer to C.
; point to letter of variable.
inc bc ; adjust length to
inc bc ; include these
inc bc ; three bytes also.
ld (X_PTR),ix ; save header pointer in X_PTR.
call RECLAIM_2 ; routine RECLAIM-2 reclaims the old variable
; sliding workspace including the two headers
; downwards.
ld ix,(X_PTR) ; reload IX from X_PTR which will have been
; adjusted down by POINTERS routine.
;; LD-DATA-1
LD_DATA_1:
ld hl,(E_LINE) ; address E_LINE
dec hl ; now point to the $80 variables end-marker.
ld bc,(ix+0x0B) ; fetch new data length
; from 2nd header.
push bc ; * save it.
inc bc ; adjust the
inc bc ; length to include
inc bc ; letter name and total length.
ld a,(ix-0x03) ; fetch letter name from old header.
push af ; preserve accumulator though not corrupted.
call MAKE_ROOM ; routine MAKE-ROOM creates space for variable
; sliding workspace up. IX no longer addresses
; anywhere meaningful.
inc hl ; point to first new location.
pop af ; fetch back the letter name.
ld (hl),a ; place in first new location.
pop de ; * pop the data length.
inc hl ; address 2nd location
ldi (hl),de ; store low byte of length.
; address next.
; store high byte.
; address start of data.
ld ix,hl ; transfer address
; to IX register pair.
scf ; set carry flag indicating load not verify.
ld a,0xFF ; signal data not header.
jp LD_BLOCK ; JUMP back to LD-BLOCK
; -----------------
; the branch is here when a program as opposed to an array is to be loaded.
;; LD-PROG
LD_PROG:
ex de,hl ; transfer dest to DE.
ld hl,(E_LINE) ; address E_LINE
dec hl ; now variables end-marker.
ld (X_PTR),ix ; place the IX header pointer in X_PTR
ld bc,(ix+0x0B) ; get new length
; from 2nd header
push bc ; and save it.
call RECLAIM_1 ; routine RECLAIM-1 reclaims program and vars.
; adjusting X-PTR.
pop bc ; restore new length.
push hl ; * save start
push bc ; ** and length.
call MAKE_ROOM ; routine MAKE-ROOM creates the space.
ld ix,(X_PTR) ; reload IX from adjusted X_PTR
inc hl ; point to start of new area.
ld bc,(ix+0x0F) ; fetch length of BASIC on tape
; from 2nd descriptor
add hl,bc ; add to address the start of variables.
ld (VARS),hl ; set system variable VARS
ld h,(ix+0x0E) ; fetch high byte of autostart line number.
ld a,h ; transfer to A
and 0xC0 ; test if greater than $3F.
jr nz,LD_PROG_1 ; forward to LD-PROG-1 if so with no autostart.
ld l,(ix+0x0D) ; else fetch the low byte.
ld (NEWPPC),hl ; set system variable to line number NEWPPC
ld (iy+NSPPC-IY0),0x00 ; set statement NSPPC to zero.
;; LD-PROG-1
LD_PROG_1:
pop de ; ** pop the length
pop ix ; * and start.
scf ; set carry flag
ld a,0xFF ; signal data as opposed to a header.
jp LD_BLOCK ; jump back to LD-BLOCK
; ---------------------------
; THE 'MERGE CONTROL' ROUTINE
; ---------------------------
; the branch was here to merge a program and its variables or an array.
;
;; ME-CONTRL
ME_CONTRL:
ld bc,(ix+0x0B) ; fetch length
; of data block on tape.
push bc ; save it.
inc bc ; one for the pot.
rst 0x30 ; BC-SPACES creates room in workspace.
; HL addresses last new location.
ld (hl),0x80 ; place end-marker at end.
ex de,hl ; transfer first location to HL.
pop de ; restore length to DE.
push hl ; save start.
ld ix,hl ; and transfer it
; to IX register.
scf ; set carry flag to load data on tape.
ld a,0xFF ; signal data not a header.
call LD_BLOCK ; routine LD-BLOCK loads to workspace.
pop hl ; restore first location in workspace to HL.
X08CE:
ld de,(PROG) ; set DE from system variable PROG.
; now enter a loop to merge the data block in workspace with the program and
; variables.
;; ME-NEW-LP
ME_NEW_LP:
ld a,(hl) ; fetch next byte from workspace.
and 0xC0 ; compare with $3F.
jr nz,ME_VAR_LP ; forward to ME-VAR-LP if a variable or
; end-marker.
; continue when HL addresses a BASIC line number.
;; ME-OLD-LP
ME_OLD_LP:
ldi a,(de) ; fetch high byte from program area.
; bump prog address.
cp (hl) ; compare with that in workspace.
inc hl ; bump workspace address.
jr nz,ME_OLD_L1 ; forward to ME-OLD-L1 if high bytes don't match
ld a,(de) ; fetch the low byte of program line number.
cp (hl) ; compare with that in workspace.
;; ME-OLD-L1
ME_OLD_L1:
dec de ; point to start of
dec hl ; respective lines again.
jr nc,ME_NEW_L2 ; forward to ME-NEW-L2 if line number in
; workspace is less than or equal to current
; program line as has to be added to program.
push hl ; else save workspace pointer.
ex de,hl ; transfer prog pointer to HL
call NEXT_ONE ; routine NEXT-ONE finds next line in DE.
pop hl ; restore workspace pointer
jr ME_OLD_LP ; back to ME-OLD-LP until destination position
; in program area found.
; ---
; the branch was here with an insertion or replacement point.
;; ME-NEW-L2
ME_NEW_L2:
call ME_ENTER ; routine ME-ENTER enters the line
jr ME_NEW_LP ; loop back to ME-NEW-LP.
; ---
; the branch was here when the location in workspace held a variable.
;; ME-VAR-LP
ME_VAR_LP:
ld a,(hl) ; fetch first byte of workspace variable.
ld c,a ; copy to C also.
cp 0x80 ; is it the end-marker ?
ret z ; return if so as complete. >>>>>
push hl ; save workspace area pointer.
ld hl,(VARS) ; load HL with VARS - start of variables area.
;; ME-OLD-VP
ME_OLD_VP:
ld a,(hl) ; fetch first byte.
cp 0x80 ; is it the end-marker ?
jr z,ME_VAR_L2 ; forward if so to ME-VAR-L2 to add
; variable at end of variables area.
cp c ; compare with variable in workspace area.
jr z,ME_OLD_V2 ; forward to ME-OLD-V2 if a match to replace.
; else entire variables area has to be searched.
;; ME-OLD-V1
ME_OLD_V1:
push bc ; save character in C.
call NEXT_ONE ; routine NEXT-ONE gets following variable
; address in DE.
pop bc ; restore character in C
ex de,hl ; transfer next address to HL.
jr ME_OLD_VP ; loop back to ME-OLD-VP
; ---
; the branch was here when first characters of name matched.
;; ME-OLD-V2
ME_OLD_V2:
and 0xE0 ; keep bits 11100000
cp 0xA0 ; compare 10100000 - a long-named variable.
jr nz,ME_VAR_L1 ; forward to ME-VAR-L1 if just one-character.
; but long-named variables have to be matched character by character.
pop de ; fetch workspace 1st character pointer
push de ; and save it on the stack again.
push hl ; save variables area pointer on stack.
;; ME-OLD-V3
ME_OLD_V3:
inc hl ; address next character in vars area.
inc de ; address next character in workspace area.
ld a,(de) ; fetch workspace character.
cp (hl) ; compare to variables character.
jr nz,ME_OLD_V4 ; forward to ME-OLD-V4 with a mismatch.
rla ; test if the terminal inverted character.
jr nc,ME_OLD_V3 ; loop back to ME-OLD-V3 if more to test.
; otherwise the long name matches in its entirety.
pop hl ; restore pointer to first character of variable
jr ME_VAR_L1 ; forward to ME-VAR-L1
; ---
; the branch is here when two characters don't match
;; ME-OLD-V4
ME_OLD_V4:
pop hl ; restore the prog/vars pointer.
jr ME_OLD_V1 ; back to ME-OLD-V1 to resume search.
; ---
; branch here when variable is to replace an existing one
;; ME-VAR-L1
ME_VAR_L1:
ld a,0xFF ; indicate a replacement.
; this entry point is when A holds $80 indicating a new variable.
;; ME-VAR-L2
ME_VAR_L2:
pop de ; pop workspace pointer.
ex de,hl ; now make HL workspace pointer, DE vars pointer
inc a ; zero flag set if replacement.
scf ; set carry flag indicating a variable not a
; program line.
call ME_ENTER ; routine ME-ENTER copies variable in.
jr ME_VAR_LP ; loop back to ME-VAR-LP
; ------------------------
; Merge a Line or Variable
; ------------------------
; A BASIC line or variable is inserted at the current point. If the line
; number or variable names match (zero flag set) then a replacement takes
; place.
;; ME-ENTER
ME_ENTER:
jr nz,ME_ENT_1 ; forward to ME-ENT-1 for insertion only.
; but the program line or variable matches so old one is reclaimed.
ex af,af' ; save flag??
ld (X_PTR),hl ; preserve workspace pointer in dynamic X_PTR
ex de,hl ; transfer program dest pointer to HL.
call NEXT_ONE ; routine NEXT-ONE finds following location
; in program or variables area.
call RECLAIM_2 ; routine RECLAIM-2 reclaims the space between.
ex de,hl ; transfer program dest pointer back to DE.
ld hl,(X_PTR) ; fetch adjusted workspace pointer from X_PTR
ex af,af' ; restore flags.
; now the new line or variable is entered.
;; ME-ENT-1
ME_ENT_1:
ex af,af' ; save or re-save flags.
push de ; save dest pointer in prog/vars area.
call NEXT_ONE ; routine NEXT-ONE finds next in workspace.
; gets next in DE, difference in BC.
; prev addr in HL
ld (X_PTR),hl ; store pointer in X_PTR
ld hl,(PROG) ; load HL from system variable PROG
ex (sp),hl ; swap with prog/vars pointer on stack.
push bc ; ** save length of new program line/variable.
ex af,af' ; fetch flags back.
jr c,ME_ENT_2 ; skip to ME-ENT-2 if variable
dec hl ; address location before pointer
call MAKE_ROOM ; routine MAKE-ROOM creates room for BASIC line
inc hl ; address next.
jr ME_ENT_3 ; forward to ME-ENT-3
; ---
;; ME-ENT-2
ME_ENT_2:
call MAKE_ROOM ; routine MAKE-ROOM creates room for variable.
;; ME-ENT-3
ME_ENT_3:
inc hl ; address next?
pop bc ; ** pop length
pop de ; * pop value for PROG which may have been
; altered by POINTERS if first line.
ld (PROG),de ; set PROG to original value.
ld de,(X_PTR) ; fetch adjusted workspace pointer from X_PTR
push bc ; save length
push de ; and workspace pointer
ex de,hl ; make workspace pointer source, prog/vars
; pointer the destination
ldir ; copy bytes of line or variable into new area.
pop hl ; restore workspace pointer.
pop bc ; restore length.
push de ; save new prog/vars pointer.
call RECLAIM_2 ; routine RECLAIM-2 reclaims the space used
; by the line or variable in workspace block
; as no longer required and space could be
; useful for adding more lines.
pop de ; restore the prog/vars pointer
ret ; return.
; --------------------------
; THE 'SAVE CONTROL' ROUTINE
; --------------------------
; A branch from the main SAVE-ETC routine at SAVE-ALL.
; First the header data is saved. Then after a wait of 1 second
; the data itself is saved.
; HL points to start of data.
; IX points to start of descriptor.
;; SA-CONTRL
SA_CONTRL:
push hl ; save start of data
ld a,0xFD ; select system channel 'S'
call CHAN_OPEN ; routine CHAN-OPEN
xor a ; clear to address table directly
ld de,tape_msgs ; address: tape-msgs
call PO_MSG ; routine PO-MSG -
; 'Start tape then press any key.'
set 5,(iy+TV_FLAG-IY0) ; TV_FLAG - Signal lower screen requires
; clearing
call WAIT_KEY ; routine WAIT-KEY
push ix ; save pointer to descriptor.
ld de,0x0011 ; there are seventeen bytes.
xor a ; signal a header.
call SA_BYTES ; routine SA-BYTES
pop ix ; restore descriptor pointer.
ld b,0x32 ; wait for a second - 50 interrupts.
;; SA-1-SEC
SA_1_SEC:
halt ; wait for interrupt
djnz SA_1_SEC ; back to SA-1-SEC until pause complete.
ld de,(ix+0x0B) ; fetch length of bytes from the
; descriptor.
ld a,0xFF ; signal data bytes.
pop ix ; retrieve pointer to start
jp SA_BYTES ; jump back to SA-BYTES
; Arrangement of two headers in workspace.
; Originally IX addresses first location and only one header is required
; when saving.
;
; OLD NEW PROG DATA DATA CODE
; HEADER HEADER num chr NOTES.
; ------ ------ ---- ---- ---- ---- -----------------------------
; IX-$11 IX+$00 0 1 2 3 Type.
; IX-$10 IX+$01 x x x x F ($FF if filename is null).
; IX-$0F IX+$02 x x x x i
; IX-$0E IX+$03 x x x x l
; IX-$0D IX+$04 x x x x e
; IX-$0C IX+$05 x x x x n
; IX-$0B IX+$06 x x x x a
; IX-$0A IX+$07 x x x x m
; IX-$09 IX+$08 x x x x e
; IX-$08 IX+$09 x x x x .
; IX-$07 IX+$0A x x x x (terminal spaces).
; IX-$06 IX+$0B lo lo lo lo Total
; IX-$05 IX+$0C hi hi hi hi Length of datablock.
; IX-$04 IX+$0D Auto - - Start Various
; IX-$03 IX+$0E Start a-z a-z addr ($80 if no autostart).
; IX-$02 IX+$0F lo - - - Length of Program
; IX-$01 IX+$10 hi - - - only i.e. without variables.
;
; ------------------------
; Canned cassette messages
; ------------------------
; The last-character-inverted Cassette messages.
; Starts with normal initial step-over byte.
;; tape-msgs
tape_msgs:
defb 0x80
defm7 'Start tape, then press any key.'
tape_msgs_2:
defb 0x0D
defm7 'Program: '
defb 0x0D
defm7 'Number array: '
defb 0x0D
defm7 'Character array: '
defb 0x0D
defm7 'Bytes: '
;**************************************************
;** Part 5. SCREEN AND PRINTER HANDLING ROUTINES **
;**************************************************
; --------------------------
; THE 'PRINT OUTPUT' ROUTINE
; --------------------------
; This is the routine most often used by the RST 10 restart although the
; subroutine is on two occasions called directly when it is known that
; output will definitely be to the lower screen.
;; PRINT-OUT
PRINT_OUT:
call PO_FETCH ; routine PO-FETCH fetches print position
; to HL register pair.
cp 0x20 ; is character a space or higher ?
jp nc,PO_ABLE ; jump forward to PO-ABLE if so.
cp 0x06 ; is character in range 00-05 ?
jr c,PO_QUEST ; to PO-QUEST to print '?' if so.
cp 0x18 ; is character in range 24d - 31d ?
jr nc,PO_QUEST ; to PO-QUEST to also print '?' if so.
ld hl,ctlchrtab-0x06 ; address 0A0B - the base address of control
; character table - where zero would be.
ld e,a ; control character 06 - 23d
ld d,0x00 ; is transferred to DE.
add hl,de ; index into table.
ld e,(hl) ; fetch the offset to routine.
add hl,de ; add to make HL the address.
push hl ; push the address.
jp PO_FETCH ; Jump forward to PO-FETCH,
; as the screen/printer position has been
; disturbed, and then indirectly to the PO-STORE
; routine on stack.
; -----------------------------
; THE 'CONTROL CHARACTER' TABLE
; -----------------------------
; For control characters in the range 6 - 23d the following table
; is indexed to provide an offset to the handling routine that
; follows the table.
;; ctlchrtab
ctlchrtab:
defb PO_COMMA - $ ; 06d offset $4E to Address: PO-COMMA
defb PO_QUEST - $ ; 07d offset $57 to Address: PO-QUEST
defb PO_BACK_1 - $ ; 08d offset $10 to Address: PO-BACK-1
defb PO_RIGHT - $ ; 09d offset $29 to Address: PO-RIGHT
defb PO_QUEST - $ ; 10d offset $54 to Address: PO-QUEST
defb PO_QUEST - $ ; 11d offset $53 to Address: PO-QUEST
defb PO_QUEST - $ ; 12d offset $52 to Address: PO-QUEST
defb PO_ENTER - $ ; 13d offset $37 to Address: PO-ENTER
defb PO_QUEST - $ ; 14d offset $50 to Address: PO-QUEST
defb PO_QUEST - $ ; 15d offset $4F to Address: PO-QUEST
defb PO_1_OPER - $ ; 16d offset $5F to Address: PO-1-OPER
defb PO_1_OPER - $ ; 17d offset $5E to Address: PO-1-OPER
defb PO_1_OPER - $ ; 18d offset $5D to Address: PO-1-OPER
defb PO_1_OPER - $ ; 19d offset $5C to Address: PO-1-OPER
defb PO_1_OPER - $ ; 20d offset $5B to Address: PO-1-OPER
defb PO_1_OPER - $ ; 21d offset $5A to Address: PO-1-OPER
defb PO_2_OPER - $ ; 22d offset $54 to Address: PO-2-OPER
defb PO_2_OPER - $ ; 23d offset $53 to Address: PO-2-OPER
; -------------------------
; THE 'CURSOR LEFT' ROUTINE
; -------------------------
; Backspace and up a line if that action is from the left of screen.
; For ZX printer backspace up to first column but not beyond.
;; PO-BACK-1
PO_BACK_1:
inc c ; move left one column.
ld a,0x22 ; value $21 is leftmost column.
cp c ; have we passed ?
jr nz,PO_BACK_3 ; to PO-BACK-3 if not and store new position.
bit 1,(iy+FLAGS-IY0) ; test FLAGS - is printer in use ?
jr nz,PO_BACK_2 ; to PO-BACK-2 if so, as we are unable to
; backspace from the leftmost position.
inc b ; move up one screen line
ld c,0x02 ; the rightmost column position.
ld a,0x18 ; Note. This should be $19
; credit. Dr. Frank O'Hara, 1982
cp b ; has position moved past top of screen ?
jr nz,PO_BACK_3 ; to PO-BACK-3 if not and store new position.
dec b ; else back to $18.
;; PO-BACK-2
PO_BACK_2:
ld c,0x21 ; the leftmost column position.
;; PO-BACK-3
PO_BACK_3:
jp CL_SET ; to CL-SET and PO-STORE to save new
; position in system variables.
; --------------------------
; THE 'CURSOR RIGHT' ROUTINE
; --------------------------
; This moves the print position to the right leaving a trail in the
; current background colour.
; "However the programmer has failed to store the new print position
; so CHR$ 9 will only work if the next print position is at a newly
; defined place.
; e.g. PRINT PAPER 2; CHR$ 9; AT 4,0;
; does work but is not very helpful"
; - Dr. Ian Logan, Understanding Your Spectrum, 1982.
;; PO-RIGHT
PO_RIGHT:
ld a,(P_FLAG) ; fetch P_FLAG value
push af ; and save it on stack.
ld (iy+P_FLAG-IY0),0x01 ; temporarily set P_FLAG 'OVER 1'.
ld a,0x20 ; prepare a space.
call PO_CHAR ; routine PO-CHAR to print it.
; Note. could be PO-ABLE which would update
; the column position.
pop af ; restore the permanent flag.
ld (P_FLAG),a ; and restore system variable P_FLAG
ret ; return without updating column position
; -----------------------
; Perform carriage return
; -----------------------
; A carriage return is 'printed' to screen or printer buffer.
;; PO-ENTER
PO_ENTER:
bit 1,(iy+FLAGS-IY0) ; test FLAGS - is printer in use ?
jp nz,COPY_BUFF ; to COPY-BUFF if so, to flush buffer and reset
; the print position.
ld c,0x21 ; the leftmost column position.
call PO_SCR ; routine PO-SCR handles any scrolling required.
dec b ; to next screen line.
jp CL_SET ; jump forward to CL-SET to store new position.
; -----------
; Print comma
; -----------
; The comma control character. The 32 column screen has two 16 character
; tabstops. The routine is only reached via the control character table.
;; PO-COMMA
PO_COMMA:
call PO_FETCH ; routine PO-FETCH - seems unnecessary.
ld a,c ; the column position. $21-$01
dec a ; move right. $20-$00
dec a ; and again $1F-$00 or $FF if trailing
and 0x10 ; will be $00 or $10.
jr PO_FILL ; forward to PO-FILL
; -------------------
; Print question mark
; -------------------
; This routine prints a question mark which is commonly
; used to print an unassigned control character in range 0-31d.
; there are a surprising number yet to be assigned.
;; PO-QUEST
PO_QUEST:
ld a,0x3F ; prepare the character '?'.
jr PO_ABLE ; forward to PO-ABLE.
; --------------------------------
; Control characters with operands
; --------------------------------
; Certain control characters are followed by 1 or 2 operands.
; The entry points from control character table are PO-2-OPER and PO-1-OPER.
; The routines alter the output address of the current channel so that
; subsequent RST $10 instructions take the appropriate action
; before finally resetting the output address back to PRINT-OUT.
;; PO-TV-2
PO_TV_2:
ld de,PO_CONT ; address: PO-CONT will be next output routine
ld (0x5C0F),a ; store first operand in TVDATA-hi
jr PO_CHANGE ; forward to PO-CHANGE >>
; ---
; -> This initial entry point deals with two operands - AT or TAB.
;; PO-2-OPER
PO_2_OPER:
ld de,PO_TV_2 ; address: PO-TV-2 will be next output routine
jr PO_TV_1 ; forward to PO-TV-1
; ---
; -> This initial entry point deals with one operand INK to OVER.
;; PO-1-OPER
PO_1_OPER:
ld de,PO_CONT ; address: PO-CONT will be next output routine
;; PO-TV-1
PO_TV_1:
ld (TVDATA),a ; store control code in TVDATA-lo
;; PO-CHANGE
PO_CHANGE:
ld hl,(CURCHL) ; use CURCHL to find current output channel.
ldi (hl),e ; make it
; the supplied
ld (hl),d ; address from DE.
ret ; return.
; ---
;; PO-CONT
PO_CONT:
ld de,PRINT_OUT ; Address: PRINT-OUT
call PO_CHANGE ; routine PO-CHANGE to restore normal channel.
ld hl,(TVDATA) ; TVDATA gives control code and possible
; subsequent character
ld d,a ; save current character
ld a,l ; the stored control code
cp 0x16 ; was it INK to OVER (1 operand) ?
jp c,CO_TEMP_5 ; to CO-TEMP-5
jr nz,PO_TAB ; to PO-TAB if not 22d i.e. 23d TAB.
; else must have been 22d AT.
ld b,h ; line to H (0-23d)
ld c,d ; column to C (0-31d)
ld a,0x1F ; the value 31d
sub c ; reverse the column number.
jr c,PO_AT_ERR ; to PO-AT-ERR if C was greater than 31d.
add a,0x02 ; transform to system range $02-$21
ld c,a ; and place in column register.
bit 1,(iy+FLAGS-IY0) ; test FLAGS - is printer in use ?
jr nz,PO_AT_SET ; to PO-AT-SET as line can be ignored.
ld a,0x16 ; 22 decimal
sub b ; subtract line number to reverse
; 0 - 22 becomes 22 - 0.
;; PO-AT-ERR
PO_AT_ERR:
jp c,REPORT_Bb ; to REPORT-B if higher than 22 decimal
; Integer out of range.
inc a ; adjust for system range $01-$17
ld b,a ; place in line register
inc b ; adjust to system range $02-$18
bit 0,(iy+TV_FLAG-IY0) ; TV_FLAG - Lower screen in use ?
jp nz,PO_SCR ; exit to PO-SCR to test for scrolling
cp (iy+DF_SZ-IY0) ; Compare against DF_SZ
jp c,REPORT_5 ; to REPORT-5 if too low
; Out of screen.
;; PO-AT-SET
PO_AT_SET:
jp CL_SET ; print position is valid so exit via CL-SET
; ---
; Continue here when dealing with TAB.
; Note. In BASIC, TAB is followed by a 16-bit number and was initially
; designed to work with any output device.
;; PO-TAB
PO_TAB:
ld a,h ; transfer parameter to A
; Losing current character -
; High byte of TAB parameter.
;; PO-FILL
PO_FILL:
call PO_FETCH ; routine PO-FETCH, HL-addr, BC=line/column.
; column 1 (right), $21 (left)
add a,c ; add operand to current column
dec a ; range 0 - 31+
and 0x1F ; make range 0 - 31d
ret z ; return if result zero
ld d,a ; Counter to D
set 0,(iy+FLAGS-IY0) ; update FLAGS - signal suppress leading space.
;; PO-SPACE
PO_SPACE:
ld a,0x20 ; space character.
call PO_SAVE ; routine PO-SAVE prints the character
; using alternate set (normal output routine)
dec d ; decrement counter.
jr nz,PO_SPACE ; to PO-SPACE until done
ret ; return
; ----------------------
; Printable character(s)
; ----------------------
; This routine prints printable characters and continues into
; the position store routine
;; PO-ABLE
PO_ABLE:
call PO_ANY ; routine PO-ANY
; and continue into position store routine.
; ----------------------------
; THE 'POSITION STORE' ROUTINE
; ----------------------------
; This routine updates the system variables associated with the main screen,
; the lower screen/input buffer or the ZX printer.
;; PO-STORE
PO_STORE:
bit 1,(iy+FLAGS-IY0) ; Test FLAGS - is printer in use ?
jr nz,PO_ST_PR ; Forward, if so, to PO-ST-PR
bit 0,(iy+TV_FLAG-IY0) ; Test TV_FLAG - is lower screen in use ?
jr nz,PO_ST_E ; Forward, if so, to PO-ST-E
; This section deals with the upper screen.
ld (S_POSN),bc ; Update S_POSN - line/column upper screen
ld (DF_CC),hl ; Update DF_CC - upper display file address
ret ; Return.
; ---
; This section deals with the lower screen.
;; PO-ST-E
PO_ST_E:
ld (SPOSNL),bc ; Update SPOSNL line/column lower screen
ld (ECHO_E),bc ; Update ECHO_E line/column input buffer
ld (DFCCL),hl ; Update DFCCL lower screen memory address
ret ; Return.
; ---
; This section deals with the ZX Printer.
;; PO-ST-PR
PO_ST_PR:
ld (iy+P_POSN-IY0),c ; Update P_POSN column position printer
ld (PR_CC),hl ; Update PR_CC - full printer buffer memory
; address
ret ; Return.
; Note. that any values stored in location 23681 will be overwritten with
; the value 91 decimal.
; Credit April 1983, Dilwyn Jones. "Delving Deeper into your ZX Spectrum".
; ----------------------------
; THE 'POSITION FETCH' ROUTINE
; ----------------------------
; This routine fetches the line/column and display file address of the upper
; and lower screen or, if the printer is in use, the column position and
; absolute memory address.
; Note. that PR-CC-hi (23681) is used by this routine and if, in accordance
; with the manual (that says this is unused), the location has been used for
; other purposes, then subsequent output to the printer buffer could corrupt
; a 256-byte section of memory.
;; PO-FETCH
PO_FETCH:
bit 1,(iy+FLAGS-IY0) ; Test FLAGS - is printer in use ?
jr nz,PO_F_PR ; Forward, if so, to PO-F-PR
; assume upper screen in use and thus optimize for path that requires speed.
ld bc,(S_POSN) ; Fetch line/column from S_POSN
ld hl,(DF_CC) ; Fetch DF_CC display file address
bit 0,(iy+TV_FLAG-IY0) ; Test TV_FLAG - lower screen in use ?
ret z ; Return if upper screen in use.
; Overwrite registers with values for lower screen.
ld bc,(SPOSNL) ; Fetch line/column from SPOSNL
ld hl,(DFCCL) ; Fetch display file address from DFCCL
ret ; Return.
; ---
; This section deals with the ZX Printer.
;; PO-F-PR
PO_F_PR:
ld c,(iy+P_POSN-IY0) ; Fetch column from P_POSN.
ld hl,(PR_CC) ; Fetch printer buffer address from PR_CC.
ret ; Return.
; ---------------------------------
; THE 'PRINT ANY CHARACTER' ROUTINE
; ---------------------------------
; This routine is used to print any character in range 32d - 255d
; It is only called from PO-ABLE which continues into PO-STORE
;; PO-ANY
PO_ANY:
cp 0x80 ; ASCII ?
jr c,PO_CHAR ; to PO-CHAR is so.
cp 0x90 ; test if a block graphic character.
jr nc,PO_T_UDG ; to PO-T&UDG to print tokens and UDGs
; The 16 2*2 mosaic characters 128-143 decimal are formed from
; bits 0-3 of the character.
ld b,a ; save character
call PO_GR_1 ; routine PO-GR-1 to construct top half
; then bottom half.
call PO_FETCH ; routine PO-FETCH fetches print position.
ld de,MEMBOT ; MEM-0 is location of 8 bytes of character
jr PR_ALL ; to PR-ALL to print to screen or printer
; ---
;; PO-GR-1
PO_GR_1:
ld hl,MEMBOT ; address MEM-0 - a temporary buffer in
; systems variables which is normally used
; by the calculator.
call PO_GR_2 ; routine PO-GR-2 to construct top half
; and continue into routine to construct
; bottom half.
;; PO-GR-2
PO_GR_2:
rr b ; rotate bit 0/2 to carry
sbc a,a ; result $00 or $FF
and 0x0F ; mask off right hand side
ld c,a ; store part in C
rr b ; rotate bit 1/3 of original chr to carry
sbc a,a ; result $00 or $FF
and 0xF0 ; mask off left hand side
or c ; combine with stored pattern
ld c,0x04 ; four bytes for top/bottom half
;; PO-GR-3
PO_GR_3:
ldi (hl),a ; store bit patterns in temporary buffer
; next address
dec c ; jump back to
jr nz,PO_GR_3 ; to PO-GR-3 until byte is stored 4 times
ret ; return
; ---
; Tokens and User defined graphics are now separated.
;; PO-T&UDG
PO_T_UDG:
sub 0xA5 ; the 'RND' character
jr nc,PO_T ; to PO-T to print tokens
add a,0x15 ; add 21d to restore to 0 - 20
push bc ; save current print position
ld bc,(UDG) ; fetch UDG to address bit patterns
jr PO_CHAR_2 ; to PO-CHAR-2 - common code to lay down
; a bit patterned character
; ---
;; PO-T
PO_T:
call PO_TOKENS ; routine PO-TOKENS prints tokens
jp PO_FETCH ; exit via a JUMP to PO-FETCH as this routine
; must continue into PO-STORE.
; A JR instruction could be used.
; This point is used to print ASCII characters 32d - 127d.
;; PO-CHAR
PO_CHAR:
push bc ; save print position
ld bc,(CHARS) ; address CHARS
; This common code is used to transfer the character bytes to memory.
;; PO-CHAR-2
PO_CHAR_2:
ex de,hl ; transfer destination address to DE
ld hl,FLAGS ; point to FLAGS
res 0,(hl) ; allow for leading space
cp 0x20 ; is it a space ?
jr nz,PO_CHAR_3 ; to PO-CHAR-3 if not
set 0,(hl) ; signal no leading space to FLAGS
;; PO-CHAR-3
PO_CHAR_3:
ld h,0x00 ; set high byte to 0
ld l,a ; character to A
; 0-21 UDG or 32-127 ASCII.
add hl,hl ; multiply
add hl,hl ; by
add hl,hl ; eight
add hl,bc ; HL now points to first byte of character
pop bc ; the source address CHARS or UDG
ex de,hl ; character address to DE
; ----------------------------------
; THE 'PRINT ALL CHARACTERS' ROUTINE
; ----------------------------------
; This entry point entered from above to print ASCII and UDGs but also from
; earlier to print mosaic characters.
; HL=destination
; DE=character source
; BC=line/column
;; PR-ALL
PR_ALL:
ld a,c ; column to A
dec a ; move right
ld a,0x21 ; pre-load with leftmost position
jr nz,PR_ALL_1 ; but if not zero to PR-ALL-1
dec b ; down one line
ld c,a ; load C with $21
bit 1,(iy+FLAGS-IY0) ; test FLAGS - Is printer in use
jr z,PR_ALL_1 ; to PR-ALL-1 if not
push de ; save source address
call COPY_BUFF ; routine COPY-BUFF outputs line to printer
pop de ; restore character source address
ld a,c ; the new column number ($21) to C
;; PR-ALL-1
PR_ALL_1:
cp c ; this test is really for screen - new line ?
push de ; save source
call z,PO_SCR ; routine PO-SCR considers scrolling
pop de ; restore source
push bc ; save line/column
push hl ; and destination
ld a,(P_FLAG) ; fetch P_FLAG to accumulator
ld b,0xFF ; prepare OVER mask in B.
rra ; bit 0 set if OVER 1
jr c,PR_ALL_2 ; to PR-ALL-2
inc b ; set OVER mask to 0
;; PR-ALL-2
PR_ALL_2:
rra ; skip bit 1 of P_FLAG
rra ; bit 2 is INVERSE
sbc a,a ; will be FF for INVERSE 1 else zero
ld c,a ; transfer INVERSE mask to C
ld a,0x08 ; prepare to count 8 bytes
and a ; clear carry to signal screen
bit 1,(iy+FLAGS-IY0) ; test FLAGS - is printer in use ?
jr z,PR_ALL_3 ; to PR-ALL-3 if screen
set 1,(iy+FLAGS2-IY0) ; update FLAGS2 - signal printer buffer has
; been used.
scf ; set carry flag to signal printer.
;; PR-ALL-3
PR_ALL_3:
ex de,hl ; now HL=source, DE=destination
;; PR-ALL-4
PR_ALL_4:
ex af,af' ; save printer/screen flag
ld a,(de) ; fetch existing destination byte
and b ; consider OVER
xor (hl) ; now XOR with source
xor c ; now with INVERSE MASK
ld (de),a ; update screen/printer
ex af,af' ; restore flag
jr c,PR_ALL_6 ; to PR-ALL-6 - printer address update
inc d ; gives next pixel line down screen
;; PR-ALL-5
PR_ALL_5:
inc hl ; address next character byte
dec a ; the byte count is decremented
jr nz,PR_ALL_4 ; back to PR-ALL-4 for all 8 bytes
ex de,hl ; destination to HL
dec h ; bring back to last updated screen position
bit 1,(iy+FLAGS-IY0) ; test FLAGS - is printer in use ?
call z,PO_ATTR ; if not, call routine PO-ATTR to update
; corresponding colour attribute.
pop hl ; restore original screen/printer position
pop bc ; and line column
dec c ; move column to right
inc hl ; increase screen/printer position
ret ; return and continue into PO-STORE
; within PO-ABLE
; ---
; This branch is used to update the printer position by 32 places
; Note. The high byte of the address D remains constant (which it should).
;; PR-ALL-6
PR_ALL_6:
ex af,af' ; save the flag
ld a,0x20 ; load A with 32 decimal
add a,e ; add this to E
ld e,a ; and store result in E
ex af,af' ; fetch the flag
jr PR_ALL_5 ; back to PR-ALL-5
; -----------------------------------
; THE 'GET ATTRIBUTE ADDRESS' ROUTINE
; -----------------------------------
; This routine is entered with the HL register holding the last screen
; address to be updated by PRINT or PLOT.
; The Spectrum screen arrangement leads to the L register holding the correct
; value for the attribute file and it is only necessary to manipulate H to
; form the correct colour attribute address.
;; PO-ATTR
PO_ATTR:
ld a,h ; fetch high byte $40 - $57
rrca ; shift
rrca ; bits 3 and 4
rrca ; to right.
and 0x03 ; range is now 0 - 2
or 0x58 ; form correct high byte for third of screen
ld h,a ; HL is now correct
ld de,(ATTR_T) ; make D hold ATTR_T, E hold MASK-T
ld a,(hl) ; fetch existing attribute
xor e ; apply masks
and d
xor e
bit 6,(iy+P_FLAG-IY0) ; test P_FLAG - is this PAPER 9 ??
jr z,PO_ATTR_1 ; skip to PO-ATTR-1 if not.
and 0xC7 ; set paper
bit 2,a ; to contrast with ink
jr nz,PO_ATTR_1 ; skip to PO-ATTR-1
xor 0x38
;; PO-ATTR-1
PO_ATTR_1:
bit 4,(iy+P_FLAG-IY0) ; test P_FLAG - Is this INK 9 ??
jr z,PO_ATTR_2 ; skip to PO-ATTR-2 if not
and 0xF8 ; make ink
bit 5,a ; contrast with paper.
jr nz,PO_ATTR_2 ; to PO-ATTR-2
xor 0x07
;; PO-ATTR-2
PO_ATTR_2:
ld (hl),a ; save the new attribute.
ret ; return.
; ---------------------------------
; THE 'MESSAGE PRINTING' SUBROUTINE
; ---------------------------------
; This entry point is used to print tape, boot-up, scroll? and error messages.
; On entry the DE register points to an initial step-over byte or the
; inverted end-marker of the previous entry in the table.
; Register A contains the message number, often zero to print first message.
; (HL has nothing important usually P_FLAG)
;; PO-MSG
PO_MSG:
push hl ; put hi-byte zero on stack to suppress
ld h,0x00 ; trailing spaces
ex (sp),hl ; ld h,0; push hl would have done ?.
jr PO_TABLE ; forward to PO-TABLE.
; ---
; This entry point prints the BASIC keywords, '<>' etc. from alt set
;; PO-TOKENS
PO_TOKENS:
ld de,TKN_TABLE ; address: TKN-TABLE
push af ; save the token number to control
; trailing spaces - see later *
; ->
;; PO-TABLE
PO_TABLE:
call PO_SEARCH ; routine PO-SEARCH will set carry for
; all messages and function words.
jr c,PO_EACH ; forward to PO-EACH if not a command, '<>' etc.
ld a,0x20 ; prepare leading space
bit 0,(iy+FLAGS-IY0) ; test FLAGS - leading space if not set
call z,PO_SAVE ; routine PO-SAVE to print a space without
; disturbing registers.
;; PO-EACH
PO_EACH:
ld a,(de) ; Fetch character from the table.
and 0x7F ; Cancel any inverted bit.
call PO_SAVE ; Routine PO-SAVE to print using the alternate
; set of registers.
ldi a,(de) ; Re-fetch character from table.
; Address next character in the table.
add a,a ; Was character inverted ?
; (this also doubles character)
jr nc,PO_EACH ; back to PO-EACH if not.
pop de ; * re-fetch trailing space byte to D
cp 0x48 ; was the last character '$' ?
jr z,PO_TR_SP ; forward to PO-TR-SP to consider trailing
; space if so.
cp 0x82 ; was it < 'A' i.e. '#','>','=' from tokens
; or ' ','.' (from tape) or '?' from scroll
ret c ; Return if so as no trailing space required.
;; PO-TR-SP
PO_TR_SP:
ld a,d ; The trailing space flag (zero if an error msg)
cp 0x03 ; Test against RND, INKEY$ and PI which have no
; parameters and therefore no trailing space.
ret c ; Return if no trailing space.
ld a,0x20 ; Prepare the space character and continue to
; print and make an indirect return.
; -----------------------------------
; THE 'RECURSIVE PRINTING' SUBROUTINE
; -----------------------------------
; This routine which is part of PRINT-OUT allows RST $10 to be used
; recursively to print tokens and the spaces associated with them.
; It is called on three occasions when the value of DE must be preserved.
;; PO-SAVE
PO_SAVE:
push de ; Save DE value.
exx ; Switch in main set
rst 0x10 ; PRINT-A prints using this alternate set.
exx ; Switch back to this alternate set.
pop de ; Restore the initial DE value.
ret ; Return.
; ------------
; Table search
; ------------
; This subroutine searches a message or the token table for the
; message number held in A. DE holds the address of the table.
;; PO-SEARCH
PO_SEARCH:
push af ; save the message/token number
ex de,hl ; transfer DE to HL
inc a ; adjust for initial step-over byte
;; PO-STEP
PO_STEP:
bit 7,(hl) ; is character inverted ?
inc hl ; address next
jr z,PO_STEP ; back to PO-STEP if not inverted.
dec a ; decrease counter
jr nz,PO_STEP ; back to PO-STEP if not zero
ex de,hl ; transfer address to DE
pop af ; restore message/token number
cp 0x20 ; return with carry set
ret c ; for all messages and function tokens
ld a,(de) ; test first character of token
sub 0x41 ; and return with carry set
ret ; if it is less that 'A'
; i.e. '<>', '<=', '>='
; ---------------
; Test for scroll
; ---------------
; This test routine is called when printing carriage return, when considering
; PRINT AT and from the general PRINT ALL characters routine to test if
; scrolling is required, prompting the user if necessary.
; This is therefore using the alternate set.
; The B register holds the current line.
;; PO-SCR
PO_SCR:
bit 1,(iy+FLAGS-IY0) ; test FLAGS - is printer in use ?
ret nz ; return immediately if so.
ld de,CL_SET ; set DE to address: CL-SET
push de ; and push for return address.
ld a,b ; transfer the line to A.
bit 0,(iy+TV_FLAG-IY0) ; test TV_FLAG - lower screen in use ?
jp nz,PO_SCR_4 ; jump forward to PO-SCR-4 if so.
cp (iy+DF_SZ-IY0) ; greater than DF_SZ display file size ?
jr c,REPORT_5 ; forward to REPORT-5 if less.
; 'Out of screen'
ret nz ; return (via CL-SET) if greater
bit 4,(iy+TV_FLAG-IY0) ; test TV_FLAG - Automatic listing ?
jr z,PO_SCR_2 ; forward to PO-SCR-2 if not.
ld e,(iy+BREG-IY0) ; fetch BREG - the count of scroll lines to E.
dec e ; decrease and jump
jr z,PO_SCR_3 ; to PO-SCR-3 if zero and scrolling required.
ld a,0x00 ; explicit - select channel zero.
call CHAN_OPEN ; routine CHAN-OPEN opens it.
ld sp,(LIST_SP) ; set stack pointer to LIST_SP
res 4,(iy+TV_FLAG-IY0) ; reset TV_FLAG - signal auto listing finished.
ret ; return ignoring pushed value, CL-SET
; to MAIN or EDITOR without updating
; print position >>
; ---
;; REPORT-5
REPORT_5:
rst 0x08 ; ERROR-1
defb 0x04 ; Error Report: Out of screen
; continue here if not an automatic listing.
;; PO-SCR-2
PO_SCR_2:
dec (iy+SCR_CT-IY0) ; decrease SCR_CT
jr nz,PO_SCR_3 ; forward to PO-SCR-3 to scroll display if
; result not zero.
; now produce prompt.
ld a,0x18 ; reset
sub b ; the
ld (SCR_CT),a ; SCR_CT scroll count
ld hl,(ATTR_T) ; L=ATTR_T, H=MASK_T
push hl ; save on stack
ld a,(P_FLAG) ; P_FLAG
push af ; save on stack to prevent lower screen
; attributes (BORDCR etc.) being applied.
ld a,0xFD ; select system channel 'K'
call CHAN_OPEN ; routine CHAN-OPEN opens it
xor a ; clear to address message directly
ld de,scrl_mssg ; make DE address: scrl-mssg
call PO_MSG ; routine PO-MSG prints to lower screen
set 5,(iy+TV_FLAG-IY0) ; set TV_FLAG - signal lower screen requires
; clearing
ld hl,FLAGS ; make HL address FLAGS
set 3,(hl) ; signal 'L' mode.
res 5,(hl) ; signal 'no new key'.
exx ; switch to main set.
; as calling chr input from alternative set.
call WAIT_KEY ; routine WAIT-KEY waits for new key
; Note. this is the right routine but the
; stream in use is unsatisfactory. From the
; choices available, it is however the best.
exx ; switch back to alternate set.
cp 0x20 ; space is considered as BREAK
jr z,REPORT_D ; forward to REPORT-D if so
; 'BREAK - CONT repeats'
cp 0xE2 ; is character 'STOP' ?
jr z,REPORT_D ; forward to REPORT-D if so
or 0x20 ; convert to lower-case
cp 0x6E ; is character 'n' ?
jr z,REPORT_D ; forward to REPORT-D if so else scroll.
ld a,0xFE ; select system channel 'S'
call CHAN_OPEN ; routine CHAN-OPEN
pop af ; restore original P_FLAG
ld (P_FLAG),a ; and save in P_FLAG.
pop hl ; restore original ATTR_T, MASK_T
ld (ATTR_T),hl ; and reset ATTR_T, MASK-T as 'scroll?' has
; been printed.
;; PO-SCR-3
PO_SCR_3:
call CL_SC_ALL ; routine CL-SC-ALL to scroll whole display
ld b,(iy+DF_SZ-IY0) ; fetch DF_SZ to B
inc b ; increase to address last line of display
ld c,0x21 ; set C to $21 (was $21 from above routine)
push bc ; save the line and column in BC.
call CL_ADDR ; routine CL-ADDR finds display address.
ld a,h ; now find the corresponding attribute byte
rrca ; (this code sequence is used twice
rrca ; elsewhere and is a candidate for
rrca ; a subroutine.)
and 0x03
or 0x58
ld h,a
ld de,0x5AE0 ; start of last 'line' of attribute area
ld a,(de) ; get attribute for last line
ld c,(hl) ; transfer to base line of upper part
ld b,0x20 ; there are thirty two bytes
ex de,hl ; swap the pointers.
;; PO-SCR-3A
PO_SCR_3A:
ld (de),a ; transfer
ld (hl),c ; attributes.
inc de ; address next.
inc hl ; address next.
djnz PO_SCR_3A ; loop back to PO-SCR-3A for all adjacent
; attribute lines.
pop bc ; restore the line/column.
ret ; return via CL-SET (was pushed on stack).
; ---
; The message 'scroll?' appears here with last byte inverted.
;; scrl-mssg
scrl_mssg:
defb 0x80 ; initial step-over byte.
defm7 'scroll?'
;; REPORT-D
REPORT_D:
rst 0x08 ; ERROR-1
defb 0x0C ; Error Report: BREAK - CONT repeats
; continue here if using lower display - A holds line number.
;; PO-SCR-4
PO_SCR_4:
cp 0x02 ; is line number less than 2 ?
jr c,REPORT_5 ; to REPORT-5 if so
; 'Out of Screen'.
add a,(iy+DF_SZ-IY0) ; add DF_SZ
sub 0x19
ret nc ; return if scrolling unnecessary
neg ; Negate to give number of scrolls required.
push bc ; save line/column
ld b,a ; count to B
ld hl,(ATTR_T) ; fetch current ATTR_T, MASK_T to HL.
push hl ; and save
ld hl,(P_FLAG) ; fetch P_FLAG
push hl ; and save.
; to prevent corruption by input AT
call TEMPS ; routine TEMPS sets to BORDCR etc
ld a,b ; transfer scroll number to A.
;; PO-SCR-4A
PO_SCR_4A:
push af ; save scroll number.
ld hl,DF_SZ ; address DF_SZ
ld b,(hl) ; fetch old value
ld a,b ; transfer to A
inc a ; and increment
ld (hl),a ; then put back.
ld hl,S_POSN_hi ; address S_POSN_hi - line
cp (hl) ; compare
jr c,PO_SCR_4B ; forward to PO-SCR-4B if scrolling required
inc (hl) ; else increment S_POSN_hi
ld b,0x18 ; set count to whole display ??
; Note. should be $17 and the top line will be
; scrolled into the ROM which is harmless on
; the standard set up.
; credit P.Giblin 1984.
;; PO-SCR-4B
PO_SCR_4B:
call CL_SCROLL ; routine CL-SCROLL scrolls B lines
pop af ; restore scroll counter.
dec a ; decrease
jr nz,PO_SCR_4A ; back to PO-SCR-4A until done
pop hl ; restore original P_FLAG.
ld (iy+P_FLAG-IY0),l ; and overwrite system variable P_FLAG.
pop hl ; restore original ATTR_T/MASK_T.
ld (ATTR_T),hl ; and update system variables.
ld bc,(S_POSN) ; fetch S_POSN to BC.
res 0,(iy+TV_FLAG-IY0) ; signal to TV_FLAG - main screen in use.
call CL_SET ; call routine CL-SET for upper display.
set 0,(iy+TV_FLAG-IY0) ; signal to TV_FLAG - lower screen in use.
pop bc ; restore line/column
ret ; return via CL-SET for lower display.
; ----------------------
; Temporary colour items
; ----------------------
; This subroutine is called 11 times to copy the permanent colour items
; to the temporary ones.
;; TEMPS
TEMPS:
xor a ; clear the accumulator
ld hl,(ATTR_P) ; fetch L=ATTR_P and H=MASK_P
bit 0,(iy+TV_FLAG-IY0) ; test TV_FLAG - is lower screen in use ?
jr z,TEMPS_1 ; skip to TEMPS-1 if not
ld h,a ; set H, MASK P, to 00000000.
ld l,(iy+BORDCR-IY0) ; fetch BORDCR to L which is used for lower
; screen.
;; TEMPS-1
TEMPS_1:
ld (ATTR_T),hl ; transfer values to ATTR_T and MASK_T
; for the print flag the permanent values are odd bits, temporary even bits.
ld hl,P_FLAG ; address P_FLAG.
jr nz,TEMPS_2 ; skip to TEMPS-2 if lower screen using A=0.
ld a,(hl) ; else pick up flag bits.
rrca ; rotate permanent bits to temporary bits.
;; TEMPS-2
TEMPS_2:
xor (hl)
and 0x55 ; BIN 01010101
xor (hl) ; permanent now as original
ld (hl),a ; apply permanent bits to temporary bits.
ret ; and return.
; -----------------
; THE 'CLS' COMMAND
; -----------------
; This command clears the display.
; The routine is also called during initialization and by the CLEAR command.
; If it's difficult to write it should be difficult to read.
;; CLS
CLS:
call CL_ALL ; Routine CL-ALL clears the entire display and
; sets the attributes to the permanent ones
; from ATTR-P.
; Having cleared all 24 lines of the display area, continue into the
; subroutine that clears the lower display area. Note that at the moment
; the attributes for the lower lines are the same as upper ones and have
; to be changed to match the BORDER colour.
; --------------------------
; THE 'CLS-LOWER' SUBROUTINE
; --------------------------
; This routine is called from INPUT, and from the MAIN execution loop.
; This is very much a housekeeping routine which clears between 2 and 23
; lines of the display, setting attributes and correcting situations where
; errors have occurred while the normal input and output routines have been
; temporarily diverted to deal with, say colour control codes.
;; CLS-LOWER
CLS_LOWER:
ld hl,TV_FLAG ; address System Variable TV_FLAG.
res 5,(hl) ; TV_FLAG - signal do not clear lower screen.
set 0,(hl) ; TV_FLAG - signal lower screen in use.
call TEMPS ; routine TEMPS applies permanent attributes,
; in this case BORDCR to ATTR_T.
; Note. this seems unnecessary and is repeated
; within CL-LINE.
ld b,(iy+DF_SZ-IY0) ; fetch lower screen display file size DF_SZ
call CL_LINE ; routine CL-LINE clears lines to bottom of the
; display and sets attributes from BORDCR while
; preserving the B register.
ld hl,0x5AC0 ; set initial attribute address to the leftmost
; cell of second line up.
ld a,(ATTR_P) ; fetch permanent attribute from ATTR_P.
dec b ; decrement lower screen display file size.
jr CLS_3 ; forward to enter the backfill loop at CLS-3
; where B is decremented again.
; ---
; The backfill loop is entered at midpoint and ensures, if more than 2
; lines have been cleared, that any other lines take the permanent screen
; attributes.
;; CLS-1
CLS_1:
ld c,0x20 ; set counter to 32 character cells per line
;; CLS-2
CLS_2:
dec hl ; decrease attribute address.
ld (hl),a ; and place attributes in next line up.
dec c ; decrease the 32 counter.
jr nz,CLS_2 ; loop back to CLS-2 until all 32 cells done.
;; CLS-3
CLS_3:
djnz CLS_1 ; decrease B counter and back to CLS-1
; if not zero.
ld (iy+DF_SZ-IY0),0x02 ; now set DF_SZ lower screen to 2
; This entry point is also called from CL-ALL below to
; reset the system channel input and output addresses to normal.
;; CL-CHAN
CL_CHAN:
ld a,0xFD ; select system channel 'K'
call CHAN_OPEN ; routine CHAN-OPEN opens it.
ld hl,(CURCHL) ; fetch CURCHL to HL to address current channel
ld de,PRINT_OUT ; set address to PRINT-OUT for first pass.
and a ; clear carry for first pass.
;; CL-CHAN-A
CL_CHAN_A:
ldi (hl),de ; Insert the output address on the first pass
; or the input address on the second pass.
ld de,KEY_INPUT ; fetch address KEY-INPUT for second pass
ccf ; complement carry flag - will set on pass 1.
jr c,CL_CHAN_A ; back to CL-CHAN-A if first pass else done.
ld bc,0x1721 ; line 23 for lower screen
jr CL_SET ; exit via CL-SET to set column
; for lower display
; ---------------------------
; Clearing whole display area
; ---------------------------
; This subroutine called from CLS, AUTO-LIST and MAIN-3
; clears 24 lines of the display and resets the relevant system variables.
; This routine also recovers from an error situation where, for instance, an
; invalid colour or position control code has left the output routine addressing
; PO-TV-2 or PO-CONT.
;; CL-ALL
CL_ALL:
ld hl,0x0000 ; Initialize plot coordinates.
ld (COORDS),hl ; Set system variable COORDS to 0,0.
res 0,(iy+FLAGS2-IY0) ; update FLAGS2 - signal main screen is clear.
call CL_CHAN ; routine CL-CHAN makes channel 'K' 'normal'.
ld a,0xFE ; select system channel 'S'
call CHAN_OPEN ; routine CHAN-OPEN opens it.
call TEMPS ; routine TEMPS applies permanent attributes,
; in this case ATTR_P, to ATTR_T.
; Note. this seems unnecessary.
ld b,0x18 ; There are 24 lines.
call CL_LINE ; routine CL-LINE clears 24 text lines and sets
; attributes from ATTR-P.
; This routine preserves B and sets C to $21.
ld hl,(CURCHL) ; fetch CURCHL make HL address output routine.
ld de,PRINT_OUT ; address: PRINT-OUT
ldi (hl),e ; is made
; the normal
ld (hl),d ; output address.
ld (iy+SCR_CT-IY0),0x01 ; set SCR_CT - scroll count - to default.
; Note. BC already contains $1821.
ld bc,0x1821 ; reset column and line to 0,0
; and continue into CL-SET, below, exiting
; via PO-STORE (for the upper screen).
; --------------------
; THE 'CL-SET' ROUTINE
; --------------------
; This important subroutine is used to calculate the character output
; address for screens or printer based on the line/column for screens
; or the column for printer.
;; CL-SET
CL_SET:
ld hl,0x5B00 ; the base address of printer buffer
bit 1,(iy+FLAGS-IY0) ; test FLAGS - is printer in use ?
jr nz,CL_SET_2 ; forward to CL-SET-2 if so.
ld a,b ; transfer line to A.
bit 0,(iy+TV_FLAG-IY0) ; test TV_FLAG - lower screen in use ?
jr z,CL_SET_1 ; skip to CL-SET-1 if handling upper part
add a,(iy+DF_SZ-IY0) ; add DF_SZ for lower screen
sub 0x18 ; and adjust.
;; CL-SET-1
CL_SET_1:
push bc ; save the line/column.
ld b,a ; transfer line to B
; (adjusted if lower screen)
call CL_ADDR ; routine CL-ADDR calculates address at left
; of screen.
pop bc ; restore the line/column.
;; CL-SET-2
CL_SET_2:
ld a,0x21 ; the column $01-$21 is reversed
sub c ; to range $00 - $20
ld e,a ; now transfer to DE
ld d,0x00 ; prepare for addition
add hl,de ; and add to base address
jp PO_STORE ; exit via PO-STORE to update the relevant
; system variables.
; ----------------
; Handle scrolling
; ----------------
; The routine CL-SC-ALL is called once from PO to scroll all the display
; and from the routine CL-SCROLL, once, to scroll part of the display.
;; CL-SC-ALL
CL_SC_ALL:
ld b,0x17 ; scroll 23 lines, after 'scroll?'.
;; CL-SCROLL
CL_SCROLL:
call CL_ADDR ; routine CL-ADDR gets screen address in HL.
ld c,0x08 ; there are 8 pixel lines to scroll.
;; CL-SCR-1
CL_SCR_1:
push bc ; save counters.
push hl ; and initial address.
ld a,b ; get line count.
and 0x07 ; will set zero if all third to be scrolled.
ld a,b ; re-fetch the line count.
jr nz,CL_SCR_3 ; forward to CL-SCR-3 if partial scroll.
; HL points to top line of third and must be copied to bottom of previous 3rd.
; ( so HL = $4800 or $5000 ) ( but also sometimes $4000 )
;; CL-SCR-2
CL_SCR_2:
ex de,hl ; copy HL to DE.
ld hl,0xF8E0 ; subtract $08 from H and add $E0 to L -
add hl,de ; to make destination bottom line of previous
; third.
ex de,hl ; restore the source and destination.
ld bc,32 ; thirty-two bytes are to be copied.
dec a ; decrement the line count.
ldir ; copy a pixel line to previous third.
;; CL-SCR-3
CL_SCR_3:
ex de,hl ; save source in DE.
ld hl,0xFFE0 ; load the value -32.
add hl,de ; add to form destination in HL.
ex de,hl ; switch source and destination
ld b,a ; save the count in B.
and 0x07 ; mask to find count applicable to current
rrca ; third and
rrca ; multiply by
rrca ; thirty two (same as 5 RLCAs)
ld c,a ; transfer byte count to C ($E0 at most)
ld a,b ; store line count to A
ld b,0x00 ; make B zero
ldir ; copy bytes (BC=0, H incremented, L=0)
ld b,0x07 ; set B to 7, C is zero.
add hl,bc ; add 7 to H to address next third.
and 0xF8 ; has last third been done ?
jr nz,CL_SCR_2 ; back to CL-SCR-2 if not.
pop hl ; restore topmost address.
inc h ; next pixel line down.
pop bc ; restore counts.
dec c ; reduce pixel line count.
jr nz,CL_SCR_1 ; back to CL-SCR-1 if all eight not done.
call CL_ATTR ; routine CL-ATTR gets address in attributes
; from current 'ninth line', count in BC.
ld hl,0xFFE0 ; set HL to the 16-bit value -32.
add hl,de ; and add to form destination address.
ex de,hl ; swap source and destination addresses.
ldir ; copy bytes scrolling the linear attributes.
ld b,0x01 ; continue to clear the bottom line.
; ------------------------------
; THE 'CLEAR TEXT LINES' ROUTINE
; ------------------------------
; This subroutine, called from CL-ALL, CLS-LOWER and AUTO-LIST and above,
; clears text lines at bottom of display.
; The B register holds on entry the number of lines to be cleared 1-24.
;; CL-LINE
CL_LINE:
push bc ; save line count
call CL_ADDR ; routine CL-ADDR gets top address
ld c,0x08 ; there are eight screen lines to a text line.
;; CL-LINE-1
CL_LINE_1:
push bc ; save pixel line count
push hl ; and save the address
ld a,b ; transfer the line to A (1-24).
;; CL-LINE-2
CL_LINE_2:
and 0x07 ; mask 0-7 to consider thirds at a time
rrca ; multiply
rrca ; by 32 (same as five RLCA instructions)
rrca ; now 32 - 256(0)
ld c,a ; store result in C
ld a,b ; save line in A (1-24)
ld b,0x00 ; set high byte to 0, prepare for ldir.
dec c ; decrement count 31-255.
ld de,hl ; copy HL
; to DE.
ld (hl),0x00 ; blank the first byte.
inc de ; make DE point to next byte.
ldir ; ldir will clear lines.
ld de,0x0701 ; now address next third adjusting
add hl,de ; register E to address left hand side
dec a ; decrease the line count.
and 0xF8 ; will be 16, 8 or 0 (AND $18 will do).
ld b,a ; transfer count to B.
jr nz,CL_LINE_2 ; back to CL-LINE-2 if 16 or 8 to do
; the next third.
pop hl ; restore start address.
inc h ; address next line down.
pop bc ; fetch counts.
dec c ; decrement pixel line count
jr nz,CL_LINE_1 ; back to CL-LINE-1 till all done.
call CL_ATTR ; routine CL-ATTR gets attribute address
; in DE and B * 32 in BC.
ld hl,de ; transfer the address
; to HL.
inc de ; make DE point to next location.
ld a,(ATTR_P) ; fetch ATTR_P - permanent attributes
bit 0,(iy+TV_FLAG-IY0) ; test TV_FLAG - lower screen in use ?
jr z,CL_LINE_3 ; skip to CL-LINE-3 if not.
ld a,(BORDCR) ; else lower screen uses BORDCR as attribute.
;; CL-LINE-3
CL_LINE_3:
ld (hl),a ; put attribute in first byte.
dec bc ; decrement the counter.
ldir ; copy bytes to set all attributes.
pop bc ; restore the line $01-$24.
ld c,0x21 ; make column $21. (No use is made of this)
ret ; return to the calling routine.
; ------------------
; Attribute handling
; ------------------
; This subroutine is called from CL-LINE or CL-SCROLL with the HL register
; pointing to the 'ninth' line and H needs to be decremented before or after
; the division. Had it been done first then either present code or that used
; at the start of PO-ATTR could have been used.
; The Spectrum screen arrangement leads to the L register already holding
; the correct value for the attribute file and it is only necessary
; to manipulate H to form the correct colour attribute address.
;; CL-ATTR
CL_ATTR:
ld a,h ; fetch H to A - $48, $50, or $58.
rrca ; divide by
rrca ; eight.
rrca ; $09, $0A or $0B.
dec a ; $08, $09 or $0A.
or 0x50 ; $58, $59 or $5A.
ld h,a ; save high byte of attributes.
ex de,hl ; transfer attribute address to DE
ld h,c ; set H to zero - from last LDIR.
ld l,b ; load L with the line from B.
add hl,hl ; multiply
add hl,hl ; by
add hl,hl ; thirty two
add hl,hl ; to give count of attribute
add hl,hl ; cells to the end of display.
ld bc,hl ; transfer the result
; to register BC.
ret ; return.
; -------------------------------
; Handle display with line number
; -------------------------------
; This subroutine is called from four places to calculate the address
; of the start of a screen character line which is supplied in B.
;; CL-ADDR
CL_ADDR:
ld a,0x18 ; reverse the line number
sub b ; to range $00 - $17.
ld d,a ; save line in D for later.
rrca ; multiply
rrca ; by
rrca ; thirty-two.
and 0xE0 ; mask off low bits to make
ld l,a ; L a multiple of 32.
ld a,d ; bring back the line to A.
and 0x18 ; now $00, $08 or $10.
or 0x40 ; add the base address of screen.
ld h,a ; HL now has the correct address.
ret ; return.
; -------------------
; Handle COPY command
; -------------------
; This command copies the top 176 lines to the ZX Printer
; It is popular to call this from machine code at point
; L0EAF with B holding 192 (and interrupts disabled) for a full-screen
; copy. This particularly applies to 16K Spectrums as time-critical
; machine code routines cannot be written in the first 16K of RAM as
; it is shared with the ULA which has precedence over the Z80 chip.
;; COPY
COPY:
di ; disable interrupts as this is time-critical.
ld b,0xB0 ; top 176 lines.
L0EAF:
ld hl,0x4000 ; address start of the display file.
; now enter a loop to handle each pixel line.
;; COPY-1
COPY_1:
push hl ; save the screen address.
push bc ; and the line counter.
call COPY_LINE ; routine COPY-LINE outputs one line.
pop bc ; restore the line counter.
pop hl ; and display address.
inc h ; next line down screen within 'thirds'.
ld a,h ; high byte to A.
and 0x07 ; result will be zero if we have left third.
jr nz,COPY_2 ; forward to COPY-2 if not to continue loop.
ld a,l ; consider low byte first.
add a,0x20 ; increase by 32 - sets carry if back to zero.
ld l,a ; will be next group of 8.
ccf ; complement - carry set if more lines in
; the previous third.
sbc a,a ; will be FF, if more, else 00.
and 0xF8 ; will be F8 (-8) or 00.
add a,h ; that is subtract 8, if more to do in third.
ld h,a ; and reset address.
;; COPY-2
COPY_2:
djnz COPY_1 ; back to COPY-1 for all lines.
jr COPY_END ; forward to COPY-END to switch off the printer
; motor and enable interrupts.
; Note. Nothing else is required.
; ------------------------------
; Pass printer buffer to printer
; ------------------------------
; This routine is used to copy 8 text lines from the printer buffer
; to the ZX Printer. These text lines are mapped linearly so HL does
; not need to be adjusted at the end of each line.
;; COPY-BUFF
COPY_BUFF:
di ; disable interrupts
ld hl,0x5B00 ; the base address of the Printer Buffer.
ld b,0x08 ; set count to 8 lines of 32 bytes.
;; COPY-3
COPY_3:
push bc ; save counter.
call COPY_LINE ; routine COPY-LINE outputs 32 bytes
pop bc ; restore counter.
djnz COPY_3 ; loop back to COPY-3 for all 8 lines.
; then stop motor and clear buffer.
; Note. the COPY command rejoins here, essentially to execute the next
; three instructions.
;; COPY-END
COPY_END:
ld a,0x04 ; output value 4 to port
out (0xFB),a ; to stop the slowed printer motor.
ei ; enable interrupts.
; --------------------
; Clear Printer Buffer
; --------------------
; This routine clears an arbitrary 256 bytes of memory.
; Note. The routine seems designed to clear a buffer that follows the
; system variables.
; The routine should check a flag or HL address and simply return if COPY
; is in use.
; As a consequence of this omission the buffer will needlessly
; be cleared when COPY is used and the screen/printer position may be set to
; the start of the buffer and the line number to 0 (B)
; giving an 'Out of Screen' error.
; There seems to have been an unsuccessful attempt to circumvent the use
; of PR_CC_hi.
;; CLEAR-PRB
CLEAR_PRB:
ld hl,0x5B00 ; the location of the buffer.
ld (iy+PR_CC-IY0),l ; update PR_CC_lo - set to zero - superfluous.
xor a ; clear the accumulator.
ld b,a ; set count to 256 bytes.
;; PRB-BYTES
PRB_BYTES:
ldi (hl),a ; set addressed location to zero.
; address next byte - Note. not INC L.
djnz PRB_BYTES ; back to PRB-BYTES. repeat for 256 bytes.
res 1,(iy+FLAGS2-IY0) ; set FLAGS2 - signal printer buffer is clear.
ld c,0x21 ; set the column position .
jp CL_SET ; exit via CL-SET and then PO-STORE.
; -----------------
; Copy line routine
; -----------------
; This routine is called from COPY and COPY-BUFF to output a line of
; 32 bytes to the ZX Printer.
; Output to port $FB -
; bit 7 set - activate stylus.
; bit 7 low - deactivate stylus.
; bit 2 set - stops printer.
; bit 2 reset - starts printer
; bit 1 set - slows printer.
; bit 1 reset - normal speed.
;; COPY-LINE
COPY_LINE:
ld a,b ; fetch the counter 1-8 or 1-176
cp 0x03 ; is it 01 or 02 ?.
sbc a,a ; result is $FF if so else $00.
and 0x02 ; result is 02 now else 00.
; bit 1 set slows the printer.
out (0xFB),a ; slow the printer for the
; last two lines.
ld d,a ; save the mask to control the printer later.
;; COPY-L-1
COPY_L_1:
call BREAK_KEY ; call BREAK-KEY to read keyboard immediately.
jr c,COPY_L_2 ; forward to COPY-L-2 if 'break' not pressed.
ld a,0x04 ; else stop the
out (0xFB),a ; printer motor.
ei ; enable interrupts.
call CLEAR_PRB ; call routine CLEAR-PRB.
; Note. should not be cleared if COPY in use.
;; REPORT-Dc
REPORT_Dc:
rst 0x08 ; ERROR-1
defb 0x0C ; Error Report: BREAK - CONT repeats
;; COPY-L-2
COPY_L_2:
in a,(0xFB) ; test now to see if
add a,a ; a printer is attached.
ret m ; return if not - but continue with parent
; command.
jr nc,COPY_L_1 ; back to COPY-L-1 if stylus of printer not
; in position.
ld c,0x20 ; set count to 32 bytes.
;; COPY-L-3
COPY_L_3:
ldi e,(hl) ; fetch a byte from line.
; address next location. Note. not INC L.
ld b,0x08 ; count the bits.
;; COPY-L-4
COPY_L_4:
rl d ; prepare mask to receive bit.
rl e ; rotate leftmost print bit to carry
rr d ; and back to bit 7 of D restoring bit 1
;; COPY-L-5
COPY_L_5:
in a,(0xFB) ; read the port.
rra ; bit 0 to carry.
jr nc,COPY_L_5 ; back to COPY-L-5 if stylus not in position.
ld a,d ; transfer command bits to A.
out (0xFB),a ; and output to port.
djnz COPY_L_4 ; loop back to COPY-L-4 for all 8 bits.
dec c ; decrease the byte count.
jr nz,COPY_L_3 ; back to COPY-L-3 until 256 bits done.
ret ; return to calling routine COPY/COPY-BUFF.
; ----------------------------------
; Editor routine for BASIC and INPUT
; ----------------------------------
; The editor is called to prepare or edit a BASIC line.
; It is also called from INPUT to input a numeric or string expression.
; The behaviour and options are quite different in the various modes
; and distinguished by bit 5 of FLAGX.
;
; This is a compact and highly versatile routine.
;; EDITOR
EDITOR:
ld hl,(ERR_SP) ; fetch ERR_SP
push hl ; save on stack
;; ED-AGAIN
ED_AGAIN:
ld hl,ED_ERROR ; address: ED-ERROR
push hl ; save address on stack and
ld (ERR_SP),sp ; make ERR_SP point to it.
; Note. While in editing/input mode should an error occur then RST 08 will
; update X_PTR to the location reached by CH_ADD and jump to ED-ERROR
; where the error will be cancelled and the loop begin again from ED-AGAIN
; above. The position of the error will be apparent when the lower screen is
; reprinted. If no error then the re-iteration is to ED-LOOP below when
; input is arriving from the keyboard.
;; ED-LOOP
ED_LOOP:
call WAIT_KEY ; routine WAIT-KEY gets key possibly
; changing the mode.
push af ; save key.
ld d,0x00 ; and give a short click based
ld e,(iy+PIP-IY0) ; on PIP value for duration.
ld hl,0x00C8 ; and pitch.
call BEEPER ; routine BEEPER gives click - effective
; with rubber keyboard.
pop af ; get saved key value.
ld hl,ED_LOOP ; address: ED-LOOP is loaded to HL.
push hl ; and pushed onto stack.
; At this point there is a looping return address on the stack, an error
; handler and an input stream set up to supply characters.
; The character that has been received can now be processed.
cp 0x18 ; range 24 to 255 ?
jr nc,ADD_CHAR ; forward to ADD-CHAR if so.
cp 0x07 ; lower than 7 ?
jr c,ADD_CHAR ; forward to ADD-CHAR also.
; Note. This is a 'bug' and chr$ 6, the comma
; control character, should have had an
; entry in the ED-KEYS table.
; Steven Vickers, 1984, Pitman.
cp 0x10 ; less than 16 ?
jr c,ED_KEYS ; forward to ED-KEYS if editing control
; range 7 to 15 dealt with by a table
ld bc,0x0002 ; prepare for ink/paper etc.
ld d,a ; save character in D
cp 0x16 ; is it ink/paper/bright etc. ?
jr c,ED_CONTR ; forward to ED-CONTR if so
; leaves 22d AT and 23d TAB
; which can't be entered via KEY-INPUT.
; so this code is never normally executed
; when the keyboard is used for input.
inc bc ; if it was AT/TAB - 3 locations required
bit 7,(iy+FLAGX-IY0) ; test FLAGX - Is this INPUT LINE ?
jp z,ED_IGNORE ; jump to ED-IGNORE if not, else
call WAIT_KEY ; routine WAIT-KEY - input address is KEY-NEXT
; but is reset to KEY-INPUT
ld e,a ; save first in E
;; ED-CONTR
ED_CONTR:
call WAIT_KEY ; routine WAIT-KEY for control.
; input address will be key-next.
push de ; saved code/parameters
ld hl,(K_CUR) ; fetch address of keyboard cursor from K_CUR
res 0,(iy+MODE-IY0) ; set MODE to 'L'
call MAKE_ROOM ; routine MAKE-ROOM makes 2/3 spaces at cursor
pop bc ; restore code/parameters
inc hl ; address first location
ldi (hl),b ; place code (ink etc.)
; address next
ld (hl),c ; place possible parameter. If only one
; then DE points to this location also.
jr ADD_CH_1 ; forward to ADD-CH-1
; ------------------------
; Add code to current line
; ------------------------
; this is the branch used to add normal non-control characters
; with ED-LOOP as the stacked return address.
; it is also the OUTPUT service routine for system channel 'R'.
;; ADD-CHAR
ADD_CHAR:
res 0,(iy+MODE-IY0) ; set MODE to 'L'
X0F85:
ld hl,(K_CUR) ; fetch address of keyboard cursor from K_CUR
call ONE_SPACE ; routine ONE-SPACE creates one space.
; either a continuation of above or from ED-CONTR with ED-LOOP on stack.
;; ADD-CH-1
ADD_CH_1:
ldi (de),a ; load current character to last new location.
; address next
ld (K_CUR),de ; and update K_CUR system variable.
ret ; return - either a simple return
; from ADD-CHAR or to ED-LOOP on stack.
; ---
; a branch of the editing loop to deal with control characters
; using a look-up table.
;; ED-KEYS
ED_KEYS:
ld e,a ; character to E.
ld d,0x00 ; prepare to add.
ld hl,ed_keys_t-0x07 ; base address of editing keys table. $0F99
add hl,de ; add E
ld e,(hl) ; fetch offset to E
add hl,de ; add offset for address of handling routine.
push hl ; push the address on machine stack.
ld hl,(K_CUR) ; load address of cursor from K_CUR.
ret ; Make an indirect jump forward to routine.
; ------------------
; Editing keys table
; ------------------
; For each code in the range $07 to $0F this table contains a
; single offset byte to the routine that services that code.
; Note. for what was intended there should also have been an
; entry for chr$ 6 with offset to ed-symbol.
;; ed-keys-t
ed_keys_t:
defb ED_EDIT - $ ; 07d offset $09 to Address: ED-EDIT
defb ED_LEFT - $ ; 08d offset $66 to Address: ED-LEFT
defb ED_RIGHT - $ ; 09d offset $6A to Address: ED-RIGHT
defb ED_DOWN - $ ; 10d offset $50 to Address: ED-DOWN
defb ED_UP - $ ; 11d offset $B5 to Address: ED-UP
defb ED_DELETE - $ ; 12d offset $70 to Address: ED-DELETE
defb ED_ENTER - $ ; 13d offset $7E to Address: ED-ENTER
defb ED_SYMBOL - $ ; 14d offset $CF to Address: ED-SYMBOL
defb ED_GRAPH - $ ; 15d offset $D4 to Address: ED-GRAPH
; ---------------
; Handle EDIT key
; ---------------
; The user has pressed SHIFT 1 to bring edit line down to bottom of screen.
; Alternatively the user wishes to clear the input buffer and start again.
; Alternatively ...
;; ED-EDIT
ED_EDIT:
ld hl,(E_PPC) ; fetch E_PPC the last line number entered.
; Note. may not exist and may follow program.
bit 5,(iy+FLAGX-IY0) ; test FLAGX - input mode ?
jp nz,CLEAR_SP ; jump forward to CLEAR-SP if not in editor.
call LINE_ADDR ; routine LINE-ADDR to find address of line
; or following line if it doesn't exist.
call LINE_NO ; routine LINE-NO will get line number from
; address or previous line if at end-marker.
ld a,d ; if there is no program then DE will
or e ; contain zero so test for this.
jp z,CLEAR_SP ; jump to CLEAR-SP if so.
; Note. at this point we have a validated line number, not just an
; approximation and it would be best to update E_PPC with the true
; cursor line value which would enable the line cursor to be suppressed
; in all situations - see shortly.
push hl ; save address of line.
inc hl ; address low byte of length.
ldi c,(hl) ; transfer to C
; next to high byte
ld b,(hl) ; transfer to B.
ld hl,0x000A ; an overhead of ten bytes
add hl,bc ; is added to length.
ld bc,hl ; transfer adjusted value
; to BC register.
call TEST_ROOM ; routine TEST-ROOM checks free memory.
call CLEAR_SP ; routine CLEAR-SP clears editing area.
ld hl,(CURCHL) ; address CURCHL
ex (sp),hl ; swap with line address on stack
push hl ; save line address underneath
ld a,0xFF ; select system channel 'R'
call CHAN_OPEN ; routine CHAN-OPEN opens it
pop hl ; drop line address
dec hl ; make it point to first byte of line num.
dec (iy+E_PPC-IY0) ; decrease E_PPC_lo to suppress line cursor.
; Note. ineffective when E_PPC is one
; greater than last line of program perhaps
; as a result of a delete.
; credit. Paul Harrison 1982.
call OUT_LINE ; routine OUT-LINE outputs the BASIC line
; to the editing area.
inc (iy+E_PPC-IY0) ; restore E_PPC_lo to the previous value.
ld hl,(E_LINE) ; address E_LINE in editing area.
inc hl ; advance
inc hl ; past space
inc hl ; and digit characters
inc hl ; of line number.
ld (K_CUR),hl ; update K_CUR to address start of BASIC.
pop hl ; restore the address of CURCHL.
call CHAN_FLAG ; routine CHAN-FLAG sets flags for it.
ret ; RETURN to ED-LOOP.
; -------------------
; Cursor down editing
; -------------------
; The BASIC lines are displayed at the top of the screen and the user
; wishes to move the cursor down one line in edit mode.
; With INPUT LINE, this key must be used instead of entering STOP.
;; ED-DOWN
ED_DOWN:
bit 5,(iy+FLAGX-IY0) ; test FLAGX - Input Mode ?
jr nz,ED_STOP ; skip to ED-STOP if so
ld hl,E_PPC ; address E_PPC - 'current line'
call LN_FETCH ; routine LN-FETCH fetches number of next
; line or same if at end of program.
jr ED_LIST ; forward to ED-LIST to produce an
; automatic listing.
; ---
;; ED-STOP
ED_STOP:
ld (iy+ERR_NR-IY0),0x10 ; set ERR_NR to 'STOP in INPUT' code
jr ED_ENTER ; forward to ED-ENTER to produce error.
; -------------------
; Cursor left editing
; -------------------
; This acts on the cursor in the lower section of the screen in both
; editing and input mode.
;; ED-LEFT
ED_LEFT:
call ED_EDGE ; routine ED-EDGE moves left if possible
jr ED_CUR ; forward to ED-CUR to update K-CUR
; and return to ED-LOOP.
; --------------------
; Cursor right editing
; --------------------
; This acts on the cursor in the lower screen in both editing and input
; mode and moves it to the right.
;; ED-RIGHT
ED_RIGHT:
ld a,(hl) ; fetch addressed character.
cp 0x0D ; is it carriage return ?
ret z ; return if so to ED-LOOP
inc hl ; address next character
;; ED-CUR
ED_CUR:
ld (K_CUR),hl ; update K_CUR system variable
ret ; return to ED-LOOP
; --------------
; DELETE editing
; --------------
; This acts on the lower screen and deletes the character to left of
; cursor. If control characters are present these are deleted first
; leaving the naked parameter (0-7) which appears as a '?' except in the
; case of chr$ 6 which is the comma control character. It is not mandatory
; to delete these second characters.
;; ED-DELETE
ED_DELETE:
call ED_EDGE ; routine ED-EDGE moves cursor to left.
ld bc,0x0001 ; of character to be deleted.
jp RECLAIM_2 ; to RECLAIM-2 reclaim the character.
; ------------------------------------------
; Ignore next 2 codes from key-input routine
; ------------------------------------------
; Since AT and TAB cannot be entered this point is never reached
; from the keyboard. If inputting from a tape device or network then
; the control and two following characters are ignored and processing
; continues as if a carriage return had been received.
; Here, perhaps, another Spectrum has said print #15; AT 0,0; "This is yellow"
; and this one is interpreting input #15; a$.
;; ED-IGNORE
ED_IGNORE:
call WAIT_KEY ; routine WAIT-KEY to ignore keystroke.
call WAIT_KEY ; routine WAIT-KEY to ignore next key.
; -------------
; Enter/newline
; -------------
; The enter key has been pressed to have BASIC line or input accepted.
;; ED-ENTER
ED_ENTER:
pop hl ; discard address ED-LOOP
pop hl ; drop address ED-ERROR
;; ED-END
ED_END:
pop hl ; the previous value of ERR_SP
ld (ERR_SP),hl ; is restored to ERR_SP system variable
bit 7,(iy+ERR_NR-IY0) ; is ERR_NR $FF (= 'OK') ?
ret nz ; return if so
ld sp,hl ; else put error routine on stack
ret ; and make an indirect jump to it.
; -----------------------------
; Move cursor left when editing
; -----------------------------
; This routine moves the cursor left. The complication is that it must
; not position the cursor between control codes and their parameters.
; It is further complicated in that it deals with TAB and AT characters
; which are never present from the keyboard.
; The method is to advance from the beginning of the line each time,
; jumping one, two, or three characters as necessary saving the original
; position at each jump in DE. Once it arrives at the cursor then the next
; legitimate leftmost position is in DE.
;; ED-EDGE
ED_EDGE:
scf ; carry flag must be set to call the nested
call SET_DE ; subroutine SET-DE.
; if input then DE=WORKSP
; if editing then DE=E_LINE
sbc hl,de ; subtract address from start of line
add hl,de ; and add back.
inc hl ; adjust for carry.
pop bc ; drop return address
ret c ; return to ED-LOOP if already at left
; of line.
push bc ; resave return address - ED-LOOP.
ld bc,hl ; transfer HL - cursor address
; to BC register pair.
; at this point DE addresses start of line.
;; ED-EDGE-1
ED_EDGE_1:
ld hl,de ; transfer DE - leftmost pointer
; to HL
inc hl ; address next leftmost character to
; advance position each time.
ld a,(de) ; pick up previous in A
and 0xF0 ; lose the low bits
cp 0x10 ; is it INK to TAB $10-$1F ?
; that is, is it followed by a parameter ?
jr nz,ED_EDGE_2 ; to ED-EDGE-2 if not
; HL has been incremented once
inc hl ; address next as at least one parameter.
; in fact since 'tab' and 'at' cannot be entered the next section seems
; superfluous.
; The test will always fail and the jump to ED-EDGE-2 will be taken.
ld a,(de) ; reload leftmost character
sub 0x17 ; decimal 23 ('tab')
adc a,0x00 ; will be 0 for 'tab' and 'at'.
jr nz,ED_EDGE_2 ; forward to ED-EDGE-2 if not
; HL has been incremented twice
inc hl ; increment a third time for 'at'/'tab'
;; ED-EDGE-2
ED_EDGE_2:
and a ; prepare for true subtraction
sbc hl,bc ; subtract cursor address from pointer
add hl,bc ; and add back
; Note when HL matches the cursor position BC,
; there is no carry and the previous
; position is in DE.
ex de,hl ; transfer result to DE if looping again.
; transfer DE to HL to be used as K-CUR
; if exiting loop.
jr c,ED_EDGE_1 ; back to ED-EDGE-1 if cursor not matched.
ret ; return.
; -----------------
; Cursor up editing
; -----------------
; The main screen displays part of the BASIC program and the user wishes
; to move up one line scrolling if necessary.
; This has no alternative use in input mode.
;; ED-UP
ED_UP:
bit 5,(iy+FLAGX-IY0) ; test FLAGX - input mode ?
ret nz ; return if not in editor - to ED-LOOP.
ld hl,(E_PPC) ; get current line from E_PPC
call LINE_ADDR ; routine LINE-ADDR gets address
ex de,hl ; and previous in DE
call LINE_NO ; routine LINE-NO gets prev line number
ld hl,0x5C4A ; set HL to E_PPC_hi as next routine stores
; top first.
call LN_STORE ; routine LN-STORE loads DE value to HL
; high byte first - E_PPC_lo takes E
; this branch is also taken from ed-down.
;; ED-LIST
ED_LIST:
call AUTO_LIST ; routine AUTO-LIST lists to upper screen
; including adjusted current line.
ld a,0x00 ; select lower screen again
jp CHAN_OPEN ; exit via CHAN-OPEN to ED-LOOP
; --------------------------------
; Use of symbol and graphics codes
; --------------------------------
; These will not be encountered with the keyboard but would be handled
; otherwise as follows.
; As noted earlier, Vickers says there should have been an entry in
; the KEYS table for chr$ 6 which also pointed here.
; If, for simplicity, two Spectrums were both using #15 as a bi-directional
; channel connected to each other:-
; then when the other Spectrum has said PRINT #15; x, y
; input #15; i ; j would treat the comma control as a newline and the
; control would skip to input j.
; You can get round the missing chr$ 6 handler by sending multiple print
; items separated by a newline '.
; chr$14 would have the same functionality.
; This is chr$ 14.
;; ED-SYMBOL
ED_SYMBOL:
bit 7,(iy+FLAGX-IY0) ; test FLAGX - is this INPUT LINE ?
jr z,ED_ENTER ; back to ED-ENTER if not to treat as if
; enter had been pressed.
; else continue and add code to buffer.
; Next is chr$ 15
; Note that ADD-CHAR precedes the table so we can't offset to it directly.
;; ED-GRAPH
ED_GRAPH:
jp ADD_CHAR ; jump back to ADD-CHAR
; --------------------
; Editor error routine
; --------------------
; If an error occurs while editing, or inputting, then ERR_SP
; points to the stack location holding address ED_ERROR.
;; ED-ERROR
ED_ERROR:
bit 4,(iy+FLAGS2-IY0) ; test FLAGS2 - is K channel in use ?
jr z,ED_END ; back to ED-END if not.
; but as long as we're editing lines or inputting from the keyboard, then
; we've run out of memory so give a short rasp.
ld (iy+ERR_NR-IY0),0xFF ; reset ERR_NR to 'OK'.
ld d,0x00 ; prepare for beeper.
ld e,(iy+RASP-IY0) ; use RASP value.
ld hl,0x1A90 ; set the pitch - or tone period.
call BEEPER ; routine BEEPER emits a warning rasp.
jp ED_AGAIN ; to ED-AGAIN to re-stack address of
; this routine and make ERR_SP point to it.
; ---------------------
; Clear edit/work space
; ---------------------
; The editing area or workspace is cleared depending on context.
; This is called from ED-EDIT to clear workspace if edit key is
; used during input, to clear editing area if no program exists
; and to clear editing area prior to copying the edit line to it.
; It is also used by the error routine to clear the respective
; area depending on FLAGX.
;; CLEAR-SP
CLEAR_SP:
push hl ; preserve HL
call SET_HL ; routine SET-HL
; if in edit HL = WORKSP-1, DE = E_LINE
; if in input HL = STKBOT, DE = WORKSP
dec hl ; adjust
call RECLAIM_1 ; routine RECLAIM-1 reclaims space
ld (K_CUR),hl ; set K_CUR to start of empty area
ld (iy+MODE-IY0),0x00 ; set MODE to 'KLC'
pop hl ; restore HL.
ret ; return.
; ----------------------------
; THE 'KEYBOARD INPUT' ROUTINE
; ----------------------------
; This is the service routine for the input stream of the keyboard channel 'K'.
;; KEY-INPUT
KEY_INPUT:
bit 3,(iy+TV_FLAG-IY0) ; test TV_FLAG - has a key been pressed in
; editor ?
call nz,ED_COPY ; routine ED-COPY, if so, to reprint the lower
; screen at every keystroke/mode change.
and a ; clear carry flag - required exit condition.
bit 5,(iy+FLAGS-IY0) ; test FLAGS - has a new key been pressed ?
ret z ; return if not. >>
ld a,(LAST_K) ; system variable LASTK will hold last key -
; from the interrupt routine.
res 5,(iy+FLAGS-IY0) ; update FLAGS - reset the new key flag.
push af ; save the input character.
bit 5,(iy+TV_FLAG-IY0) ; test TV_FLAG - clear lower screen ?
call nz,CLS_LOWER ; routine CLS-LOWER if so.
pop af ; restore the character code.
cp 0x20 ; if space or higher then
jr nc,KEY_DONE2 ; forward to KEY-DONE2 and return with carry
; set to signal key-found.
cp 0x10 ; with 16d INK and higher skip
jr nc,KEY_CONTR ; forward to KEY-CONTR.
cp 0x06 ; for 6 - 15d
jr nc,KEY_M_CL ; skip forward to KEY-M-CL to handle Modes
; and CapsLock.
; that only leaves 0-5, the flash bright inverse switches.
ld b,a ; save character in B
and 0x01 ; isolate the embedded parameter (0/1).
ld c,a ; and store in C
ld a,b ; re-fetch copy (0-5)
rra ; halve it 0, 1 or 2.
add a,0x12 ; add 18d gives 'flash', 'bright'
; and 'inverse'.
jr KEY_DATA ; forward to KEY-DATA with the
; parameter (0/1) in C.
; ---
; Now separate capslock 06 from modes 7-15.
;; KEY-M-CL
KEY_M_CL:
jr nz,KEY_MODE ; forward to KEY-MODE if not 06 (capslock)
ld hl,FLAGS2 ; point to FLAGS2
ld a,0x08 ; value 00001000
xor (hl) ; toggle BIT 3 of FLAGS2 the capslock bit
ld (hl),a ; and store result in FLAGS2 again.
jr KEY_FLAG ; forward to KEY-FLAG to signal no-key.
; ---
;; KEY-MODE
KEY_MODE:
cp 0x0E ; compare with chr 14d
ret c ; return with carry set "key found" for
; codes 7 - 13d leaving 14d and 15d
; which are converted to mode codes.
sub 0x0D ; subtract 13d leaving 1 and 2
; 1 is 'E' mode, 2 is 'G' mode.
ld hl,MODE ; address the MODE system variable.
cp (hl) ; compare with existing value before
ld (hl),a ; inserting the new value.
jr nz,KEY_FLAG ; forward to KEY-FLAG if it has changed.
ld (hl),0x00 ; else make MODE zero - KLC mode
; Note. while in Extended/Graphics mode,
; the Extended Mode/Graphics key is pressed
; again to get out.
;; KEY-FLAG
KEY_FLAG:
set 3,(iy+TV_FLAG-IY0) ; update TV_FLAG - show key state has changed
cp a ; clear carry and reset zero flags -
; no actual key returned.
ret ; make the return.
; ---
; now deal with colour controls - 16-23 ink, 24-31 paper
;; KEY-CONTR
KEY_CONTR:
ld b,a ; make a copy of character.
and 0x07 ; mask to leave bits 0-7
ld c,a ; and store in C.
ld a,0x10 ; initialize to 16d - INK.
bit 3,b ; was it paper ?
jr nz,KEY_DATA ; forward to KEY-DATA with INK 16d and
; colour in C.
inc a ; else change from INK to PAPER (17d) if so.
;; KEY-DATA
KEY_DATA:
ld (iy+K_DATA-IY0),c ; put the colour (0-7)/state(0/1) in KDATA
ld de,KEY_NEXT ; address: KEY-NEXT will be next input stream
jr KEY_CHAN ; forward to KEY-CHAN to change it ...
; ---
; ... so that INPUT_AD directs control to here at next call to WAIT-KEY
;; KEY-NEXT
KEY_NEXT:
ld a,(K_DATA) ; pick up the parameter stored in KDATA.
ld de,KEY_INPUT ; address: KEY-INPUT will be next input stream
; continue to restore default channel and
; make a return with the control code.
;; KEY-CHAN
KEY_CHAN:
ld hl,(CHANS) ; address start of CHANNELS area using CHANS
; system variable.
; Note. One might have expected CURCHL to
; have been used.
inc hl ; step over the
inc hl ; output address
ldi (hl),e ; and update the input
; routine address for
ld (hl),d ; the next call to WAIT-KEY.
;; KEY-DONE2
KEY_DONE2:
scf ; set carry flag to show a key has been found
ret ; and return.
; --------------------
; Lower screen copying
; --------------------
; This subroutine is called whenever the line in the editing area or
; input workspace is required to be printed to the lower screen.
; It is by calling this routine after any change that the cursor, for
; instance, appears to move to the left.
; Remember the edit line will contain characters and tokens
; e.g. "1000 LET a=1" is 8 characters.
;; ED-COPY
ED_COPY:
call TEMPS ; routine TEMPS sets temporary attributes.
res 3,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal no change in mode
res 5,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal don't clear lower
; screen.
ld hl,(SPOSNL) ; fetch SPOSNL
push hl ; and save on stack.
ld hl,(ERR_SP) ; fetch ERR_SP
push hl ; and save also
ld hl,ED_FULL ; address: ED-FULL
push hl ; is pushed as the error routine
ld (ERR_SP),sp ; and ERR_SP made to point to it.
ld hl,(ECHO_E) ; fetch ECHO_E
push hl ; and push also
scf ; set carry flag to control SET-DE
call SET_DE ; call routine SET-DE
; if in input DE = WORKSP
; if in edit DE = E_LINE
ex de,hl ; start address to HL
call OUT_LINE2 ; routine OUT-LINE2 outputs entire line up to
; carriage return including initial
; characterized line number when present.
ex de,hl ; transfer new address to DE
call OUT_CURS ; routine OUT-CURS considers a
; terminating cursor.
ld hl,(SPOSNL) ; fetch updated SPOSNL
ex (sp),hl ; exchange with ECHO_E on stack
ex de,hl ; transfer ECHO_E to DE
call TEMPS ; routine TEMPS to re-set attributes
; if altered.
; the lower screen was not cleared, at the outset, so if deleting then old
; text from a previous print may follow this line and requires blanking.
;; ED-BLANK
ED_BLANK:
ld a,(0x5C8B) ; fetch SPOSNL_hi is current line
sub d ; compare with old
jr c,ED_C_DONE ; forward to ED-C-DONE if no blanking
jr nz,ED_SPACES ; forward to ED-SPACES if line has changed
ld a,e ; old column to A
sub (iy+SPOSNL-IY0) ; subtract new in SPOSNL_lo
jr nc,ED_C_DONE ; forward to ED-C-DONE if no backfilling.
;; ED-SPACES
ED_SPACES:
ld a,0x20 ; prepare a space.
push de ; save old line/column.
call PRINT_OUT ; routine PRINT-OUT prints a space over
; any text from previous print.
; Note. Since the blanking only occurs when
; using $09F4 to print to the lower screen,
; there is no need to vector via a RST 10
; and we can use this alternate set.
pop de ; restore the old line column.
jr ED_BLANK ; back to ED-BLANK until all old text blanked.
; -------------------------------
; THE 'EDITOR-FULL' ERROR ROUTINE
; -------------------------------
; This is the error routine addressed by ERR_SP. This is not for the out of
; memory situation as we're just printing. The pitch and duration are exactly
; the same as used by ED-ERROR from which this has been augmented. The
; situation is that the lower screen is full and a rasp is given to suggest
; that this is perhaps not the best idea you've had that day.
;; ED-FULL
ED_FULL:
ld d,0x00 ; prepare to moan.
ld e,(iy+RASP-IY0) ; fetch RASP value.
ld hl,0x1A90 ; set pitch or tone period.
call BEEPER ; routine BEEPER.
ld (iy+ERR_NR-IY0),0xFF ; clear ERR_NR.
ld de,(SPOSNL) ; fetch SPOSNL.
jr ED_C_END ; forward to ED-C-END
; -------
; the exit point from line printing continues here.
;; ED-C-DONE
ED_C_DONE:
pop de ; fetch new line/column.
pop hl ; fetch the error address.
; the error path rejoins here.
;; ED-C-END
ED_C_END:
pop hl ; restore the old value of ERR_SP.
ld (ERR_SP),hl ; update the system variable ERR_SP
pop bc ; old value of SPOSN_L
push de ; save new value
call CL_SET ; routine CL-SET and PO-STORE
; update ECHO_E and SPOSN_L from BC
pop hl ; restore new value
ld (ECHO_E),hl ; and overwrite ECHO_E
ld (iy+0x26),0x00 ; make error pointer X_PTR_hi out of bounds
ret ; return
; -----------------------------------------------
; Point to first and last locations of work space
; -----------------------------------------------
; These two nested routines ensure that the appropriate pointers are
; selected for the editing area or workspace. The routines that call
; these routines are designed to work on either area.
; this routine is called once
;; SET-HL
SET_HL:
ld hl,(WORKSP) ; fetch WORKSP to HL.
dec hl ; point to last location of editing area.
and a ; clear carry to limit exit points to first
; or last.
; this routine is called with carry set and exits at a conditional return.
;; SET-DE
SET_DE:
ld de,(E_LINE) ; fetch E_LINE to DE
bit 5,(iy+FLAGX-IY0) ; test FLAGX - Input Mode ?
ret z ; return now if in editing mode
ld de,(WORKSP) ; fetch WORKSP to DE
ret c ; return if carry set ( entry = set-de)
ld hl,(STKBOT) ; fetch STKBOT to HL as well
ret ; and return (entry = set-hl (in input))
; -----------------------------------
; THE 'REMOVE FLOATING POINT' ROUTINE
; -----------------------------------
; When a BASIC LINE or the INPUT BUFFER is parsed any numbers will have
; an invisible chr 14d inserted after them and the 5-byte integer or
; floating point form inserted after that. Similar invisible value holders
; are also created after the numeric and string variables in a DEF FN list.
; This routine removes these 'compiled' numbers from the edit line or
; input workspace.
;; REMOVE-FP
REMOVE_FP:
ld a,(hl) ; fetch character
cp 0x0E ; is it the CHR$ 14 number marker ?
ld bc,0x0006 ; prepare to strip six bytes
call z,RECLAIM_2 ; routine RECLAIM-2 reclaims bytes if CHR$ 14.
ldi a,(hl) ; reload next (or same) character
; and advance address
cp 0x0D ; end of line or input buffer ?
jr nz,REMOVE_FP ; back to REMOVE-FP until entire line done.
ret ; return.
; *********************************
; ** Part 6. EXECUTIVE ROUTINES **
; *********************************
; The memory.
;
; +---------+-----------+------------+--------------+-------------+--
; | BASIC | Display | Attributes | ZX Printer | System |
; | ROM | File | File | Buffer | Variables |
; +---------+-----------+------------+--------------+-------------+--
; ^ ^ ^ ^ ^ ^
; $0000 $4000 $5800 $5B00 $5C00 $5CB6 = CHANS
;
;
; --+----------+---+---------+-----------+---+------------+--+---+--
; | Channel |$80| BASIC | Variables |$80| Edit Line |NL|$80|
; | Info | | Program | Area | | or Command | | |
; --+----------+---+---------+-----------+---+------------+--+---+--
; ^ ^ ^ ^ ^
; CHANS PROG VARS E_LINE WORKSP
;
;
; ---5--> <---2--- <--3---
; --+-------+--+------------+-------+-------+---------+-------+-+---+------+
; | INPUT |NL| Temporary | Calc. | Spare | Machine | GOSUB |?|$3E| UDGs |
; | data | | Work Space | Stack | | Stack | Stack | | | |
; --+-------+--+------------+-------+-------+---------+-------+-+---+------+
; ^ ^ ^ ^ ^ ^ ^
; WORKSP STKBOT STKEND sp RAMTOP UDG P_RAMT
;
; -----------------
; THE 'NEW' COMMAND
; -----------------
; The NEW command is about to set all RAM below RAMTOP to zero and then
; re-initialize the system. All RAM above RAMTOP should, and will be,
; preserved.
; There is nowhere to store values in RAM or on the stack which becomes
; inoperable. Similarly PUSH and CALL instructions cannot be used to store
; values or section common code. The alternate register set is the only place
; available to store 3 persistent 16-bit system variables.
;; NEW
NEW:
di ; Disable Interrupts - machine stack will be
; cleared.
ld a,0xFF ; Flag coming from NEW.
ld de,(RAMTOP) ; Fetch RAMTOP as top value.
exx ; Switch in alternate set.
ld bc,(P_RAMT) ; Fetch P-RAMT differs on 16K/48K machines.
ld de,(RASP) ; Fetch RASP/PIP.
ld hl,(UDG) ; Fetch UDG differs on 16K/48K machines.
exx ; Switch back to main set and continue into...
; ----------------------
; THE 'START-NEW' BRANCH
; ----------------------
; This branch is taken from above and from RST 00h.
; The common code tests RAM and sets it to zero re-initializing all the
; non-zero system variables and channel information. The A register flags
; if coming from START or NEW.
;; START-NEW
START_NEW:
ld b,a ; Save the flag to control later branching.
ld a,0x07 ; Select a white border
out (0xFE),a ; and set it now by writing to a port.
ld a,0x3F ; Load the accumulator with last page in ROM.
ld i,a ; Set the I register - this remains constant
; and can't be in the range $40 - $7F as 'snow'
; appears on the screen.
nop ; These seem unnecessary.
nop
nop
nop
nop
nop
; -----------------------
; THE 'RAM CHECK' SECTION
; -----------------------
; Typically, a Spectrum will have 16K or 48K of RAM and this code will test
; it all till it finds an unpopulated location or, less likely, a faulty
; location. Usually it stops when it reaches the top $FFFF, or in the case
; of NEW the supplied top value. The entire screen turns black with
; sometimes red stripes on black paper just visible.
;; ram-check
ram_check:
ld hl,de ; Transfer the top value to the HL register
; pair.
;; RAM-FILL
RAM_FILL:
ldd (hl),0x02 ; Load memory with $02 - red ink on black paper.
; Decrement memory address.
cp h ; Have we reached ROM - $3F ?
jr nz,RAM_FILL ; Back to RAM-FILL if not.
;; RAM-READ
RAM_READ:
and a ; Clear carry - prepare to subtract.
sbc hl,de ; subtract and add back setting
add hl,de ; carry when back at start.
inc hl ; and increment for next iteration.
jr nc,RAM_DONE ; forward to RAM-DONE if we've got back to
; starting point with no errors.
dec (hl) ; decrement to 1.
jr z,RAM_DONE ; forward to RAM-DONE if faulty.
dec (hl) ; decrement to zero.
jr z,RAM_READ ; back to RAM-READ if zero flag was set.
;; RAM-DONE
RAM_DONE:
dec hl ; step back to last valid location.
exx ; regardless of state, set up possibly
; stored system variables in case from NEW.
ld (P_RAMT),bc ; insert P-RAMT.
ld (RASP),de ; insert RASP/PIP.
ld (UDG),hl ; insert UDG.
exx ; switch in main set.
inc b ; now test if we arrived here from NEW.
jr z,RAM_SET ; forward to RAM-SET if we did.
; This section applies to START only.
ld (P_RAMT),hl ; set P-RAMT to the highest working RAM
; address.
ld de,0x3EAF ; address of last byte of 'U' bitmap in ROM.
ld bc,0x00A8 ; there are 21 user defined graphics.
ex de,hl ; switch pointers and make the UDGs a
lddr ; copy of the standard characters A - U.
ex de,hl ; switch the pointer to HL.
inc hl ; update to start of 'A' in RAM.
ld (UDG),hl ; make UDG system variable address the first
; bitmap.
dec hl ; point at RAMTOP again.
ld bc,0x0040 ; set the values of
ld (RASP),bc ; the PIP and RASP system variables.
; The NEW command path rejoins here.
;; RAM-SET
RAM_SET:
ld (RAMTOP),hl ; set system variable RAMTOP to HL.
;
; Note. this entry point is a disabled Warm Restart that was almost certainly
; once pointed to by the System Variable NMIADD. It would be essential that
; any NMI Handler would perform the tasks from here to the EI instruction
; below.
;; NMI_VECT
NMI_VECT:
ld hl,0x3C00 ; a strange place to set the pointer to the
ld (CHARS),hl ; character set, CHARS - as no printing yet.
ld hl,(RAMTOP) ; fetch RAMTOP to HL again as we've lost it.
ldd (hl),0x3E ; top of user ram holds GOSUB end marker
; an impossible line number - see RETURN.
; no significance in the number $3E. It has
; been traditional since the ZX80.
; followed by empty byte (not important).
ld sp,hl ; set up the machine stack pointer.
dec hl
dec hl
ld (ERR_SP),hl ; ERR_SP is where the error pointer is
; at moment empty - will take address MAIN-4
; at the call preceding that address,
; although interrupts and calls will make use
; of this location in meantime.
im 1 ; select interrupt mode 1.
ld iy,ERR_NR ; set IY to ERR_NR. IY can reach all standard
; system variables but shadow ROM system
; variables will be mostly out of range.
ei ; enable interrupts now that we have a stack.
; If, as suggested above, the NMI service routine pointed to this section of
; code then a decision would have to be made at this point to jump forward,
; in a Warm Restart scenario, to produce a report code, leaving any program
; intact.
ld hl,0x5CB6 ; The address of the channels - initially
; following system variables.
ld (CHANS),hl ; Set the CHANS system variable.
ld de,init_chan ; Address: init-chan in ROM.
ld bc,0x0015 ; There are 21 bytes of initial data in ROM.
ex de,hl ; swap the pointers.
ldir ; Copy the bytes to RAM.
ex de,hl ; Swap pointers. HL points to program area.
dec hl ; Decrement address.
ld (DATADD),hl ; Set DATADD to location before program area.
inc hl ; Increment again.
ld (PROG),hl ; Set PROG the location where BASIC starts.
ld (VARS),hl ; Set VARS to same location with a
ldi (hl),0x80 ; variables end-marker.
; Advance address.
ld (E_LINE),hl ; Set E_LINE, where the edit line
; will be created.
; Note. it is not strictly necessary to
; execute the next fifteen bytes of code
; as this will be done by the call to SET-MIN.
; --
ldi (hl),0x0D ; initially just has a carriage return
; followed by
ldi (hl),0x80 ; an end-marker.
; address the next location.
ld (WORKSP),hl ; set WORKSP - empty workspace.
ld (STKBOT),hl ; set STKBOT - bottom of the empty stack.
ld (STKEND),hl ; set STKEND to the end of the empty stack.
; --
ld a,0x38 ; the colour system is set to white paper,
; black ink, no flash or bright.
ld (ATTR_P),a ; set ATTR_P permanent colour attributes.
ld (ATTR_T),a ; set ATTR_T temporary colour attributes.
ld (BORDCR),a ; set BORDCR the border colour/lower screen
; attributes.
ld hl,0x0523 ; The keyboard repeat and delay values are
ld (REPDEL),hl ; loaded to REPDEL and REPPER.
dec (iy+KSTATE-IY0) ; set KSTATE-0 to $FF - keyboard map available.
dec (iy+KSTATE4-IY0) ; set KSTATE-4 to $FF - keyboard map available.
ld hl,init_strm ; set source to ROM Address: init-strm
ld de,STRMS ; set destination to system variable STRMS-FD
ld bc,0x000E ; copy the 14 bytes of initial 7 streams data
ldir ; from ROM to RAM.
set 1,(iy+FLAGS-IY0) ; update FLAGS - signal printer in use.
call CLEAR_PRB ; call routine CLEAR-PRB to initialize system
; variables associated with printer.
; The buffer is clear.
ld (iy+DF_SZ-IY0),0x02 ; set DF_SZ the lower screen display size to
; two lines
call CLS ; call routine CLS to set up system
; variables associated with screen and clear
; the screen and set attributes.
xor a ; clear accumulator so that we can address
ld de,copyright-0x01 ; the message table directly.
call PO_MSG ; routine PO-MSG puts
; ' © 1982 Sinclair Research Ltd'
; at bottom of display.
set 5,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal lower screen will
; require clearing.
jr MAIN_1 ; forward to MAIN-1
; -------------------------
; THE 'MAIN EXECUTION LOOP'
; -------------------------
;
;
;; MAIN-EXEC
MAIN_EXEC:
ld (iy+DF_SZ-IY0),0x02 ; set DF_SZ lower screen display file size to
; two lines.
call AUTO_LIST ; routine AUTO-LIST
;; MAIN-1
MAIN_1:
call SET_MIN ; routine SET-MIN clears work areas.
;; MAIN-2
MAIN_2:
ld a,0x00 ; select channel 'K' the keyboard
call CHAN_OPEN ; routine CHAN-OPEN opens it
call EDITOR ; routine EDITOR is called.
; Note the above routine is where the Spectrum
; waits for user-interaction. Perhaps the
; most common input at this stage
; is LOAD "".
call LINE_SCAN ; routine LINE-SCAN scans the input.
bit 7,(iy+ERR_NR-IY0) ; test ERR_NR - will be $FF if syntax is OK.
jr nz,MAIN_3 ; forward, if correct, to MAIN-3.
;
bit 4,(iy+FLAGS2-IY0) ; test FLAGS2 - K channel in use ?
jr z,MAIN_4 ; forward to MAIN-4 if not.
;
ld hl,(E_LINE) ; an editing error so address E_LINE.
call REMOVE_FP ; routine REMOVE-FP removes the hidden
; floating-point forms.
ld (iy+ERR_NR-IY0),0xFF ; system variable ERR_NR is reset to 'OK'.
jr MAIN_2 ; back to MAIN-2 to allow user to correct.
; ---
; the branch was here if syntax has passed test.
;; MAIN-3
MAIN_3:
ld hl,(E_LINE) ; fetch the edit line address from E_LINE.
ld (CH_ADD),hl ; system variable CH_ADD is set to first
; character of edit line.
; Note. the above two instructions are a little
; inadequate.
; They are repeated with a subtle difference
; at the start of the next subroutine and are
; therefore not required above.
call E_LINE_NO ; routine E-LINE-NO will fetch any line
; number to BC if this is a program line.
ld a,b ; test if the number of
or c ; the line is non-zero.
jp nz,MAIN_ADD ; jump forward to MAIN-ADD if so to add the
; line to the BASIC program.
; Has the user just pressed the ENTER key ?
rst 0x18 ; GET-CHAR gets character addressed by CH_ADD.
cp 0x0D ; is it a carriage return ?
jr z,MAIN_EXEC ; back to MAIN-EXEC if so for an automatic
; listing.
; this must be a direct command.
bit 0,(iy+FLAGS2-IY0) ; test FLAGS2 - clear the main screen ?
call nz,CL_ALL ; routine CL-ALL, if so, e.g. after listing.
call CLS_LOWER ; routine CLS-LOWER anyway.
ld a,0x19 ; compute scroll count as 25 minus
sub (iy+S_POSN_hi-IY0) ; value of S_POSN_hi.
ld (SCR_CT),a ; update SCR_CT system variable.
set 7,(iy+FLAGS-IY0) ; update FLAGS - signal running program.
ld (iy+ERR_NR-IY0),0xFF ; set ERR_NR to 'OK'.
ld (iy+NSPPC-IY0),0x01 ; set NSPPC to one for first statement.
call LINE_RUN ; call routine LINE-RUN to run the line.
; sysvar ERR_SP therefore addresses MAIN-4
; Examples of direct commands are RUN, CLS, LOAD "", PRINT USR 40000,
; LPRINT "A"; etc..
; If a user written machine-code program disables interrupts then it
; must enable them to pass the next step. We also jumped to here if the
; keyboard was not being used.
;; MAIN-4
MAIN_4:
halt ; wait for interrupt the only routine that can
; set bit 5 of FLAGS.
res 5,(iy+FLAGS-IY0) ; update bit 5 of FLAGS - signal no new key.
bit 1,(iy+FLAGS2-IY0) ; test FLAGS2 - is printer buffer clear ?
call nz,COPY_BUFF ; call routine COPY-BUFF if not.
; Note. the programmer has neglected
; to set bit 1 of FLAGS first.
ld a,(ERR_NR) ; fetch ERR_NR
inc a ; increment to give true code.
; Now deal with a runtime error as opposed to an editing error.
; However if the error code is now zero then the OK message will be printed.
;; MAIN-G
MAIN_G:
push af ; save the error number.
ld hl,0x0000 ; prepare to clear some system variables.
ld (iy+FLAGX-IY0),h ; clear all the bits of FLAGX.
ld (iy+0x26),h ; blank X_PTR_hi to suppress error marker.
ld (DEFADD),hl ; blank DEFADD to signal that no defined
; function is currently being evaluated.
ld hl,0x0001 ; explicit - inc hl would do.
ld (0x5C16),hl ; ensure STRMS-00 is keyboard.
call SET_MIN ; routine SET-MIN clears workspace etc.
res 5,(iy+FLAGX-IY0) ; update FLAGX - signal in EDIT not INPUT mode.
; Note. all the bits were reset earlier.
call CLS_LOWER ; call routine CLS-LOWER.
set 5,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal lower screen
; requires clearing.
pop af ; bring back the true error number
ld b,a ; and make a copy in B.
cp 0x0A ; is it a print-ready digit ?
jr c,MAIN_5 ; forward to MAIN-5 if so.
add a,0x07 ; add ASCII offset to letters.
;; MAIN-5
MAIN_5:
call OUT_CODE ; call routine OUT-CODE to print the code.
ld a,0x20 ; followed by a space.
rst 0x10 ; PRINT-A
ld a,b ; fetch stored report code.
ld de,rpt_mesgs ; address: rpt-mesgs.
call PO_MSG ; call routine PO-MSG to print the message.
X1349:
xor a ; clear accumulator to directly
ld de,comma_sp-0x01 ; address the comma and space message.
call PO_MSG ; routine PO-MSG prints ', ' although it would
; be more succinct to use RST $10.
ld bc,(PPC) ; fetch PPC the current line number.
call OUT_NUM_1 ; routine OUT-NUM-1 will print that
ld a,0x3A ; then a ':' character.
rst 0x10 ; PRINT-A
ld c,(iy+SUBPPC-IY0) ; then SUBPPC for statement
ld b,0x00 ; limited to 127
call OUT_NUM_1 ; routine OUT-NUM-1 prints BC.
call CLEAR_SP ; routine CLEAR-SP clears editing area which
; probably contained 'RUN'.
ld a,(ERR_NR) ; fetch ERR_NR again
inc a ; test for no error originally $FF.
jr z,MAIN_9 ; forward to MAIN-9 if no error.
cp 0x09 ; is code Report 9 STOP ?
jr z,MAIN_6 ; forward to MAIN-6 if so
cp 0x15 ; is code Report L Break ?
jr nz,MAIN_7 ; forward to MAIN-7 if not
; Stop or Break was encountered so consider CONTINUE.
;; MAIN-6
MAIN_6:
inc (iy+SUBPPC-IY0) ; increment SUBPPC to next statement.
;; MAIN-7
MAIN_7:
ld bc,0x0003 ; prepare to copy 3 system variables to
ld de,OSPCC ; address OSPPC - statement for CONTINUE.
; also updating OLDPPC line number below.
ld hl,NSPPC ; set source top to NSPPC next statement.
bit 7,(hl) ; did BREAK occur before the jump ?
; e.g. between GO TO and next statement.
jr z,MAIN_8 ; skip forward to MAIN-8, if not, as set-up
; is correct.
add hl,bc ; set source to SUBPPC number of current
; statement/line which will be repeated.
;; MAIN-8
MAIN_8:
lddr ; copy PPC to OLDPPC and SUBPPC to OSPCC
; or NSPPC to OLDPPC and NEWPPC to OSPCC
;; MAIN-9
MAIN_9:
ld (iy+NSPPC-IY0),0xFF ; update NSPPC - signal 'no jump'.
res 3,(iy+FLAGS-IY0) ; update FLAGS - signal use 'K' mode for
; the first character in the editor and
jp MAIN_2 ; jump back to MAIN-2.
; ----------------------
; Canned report messages
; ----------------------
; The Error reports with the last byte inverted. The first entry
; is a dummy entry. The last, which begins with $7F, the Spectrum
; character for copyright symbol, is placed here for convenience
; as is the preceding comma and space.
; The report line must accommodate a 4-digit line number and a 3-digit
; statement number which limits the length of the message text to twenty
; characters.
; e.g. "B Integer out of range, 1000:127"
;; rpt-mesgs
rpt_mesgs:
defb 0x80
defm7 'OK' ; 0
defm7 'NEXT without FOR'
; 1
defm7 'Variable not found'
; 2
defm7 'Subscript wrong' ; 3
defm7 'Out of memory' ; 4
defm7 'Out of screen' ; 5
defm7 'Number too big' ; 6
defm7 'RETURN without GOSUB'
; 7
defm7 'End of file' ; 8
defm7 'STOP statement' ; 9
defm7 'Invalid argument'
; A
defm7 'Integer out of range'
; B
defm7 'Nonsense in BASIC'
; C
defm7 'BREAK - CONT repeats'
; D
defm7 'Out of DATA' ; E
defm7 'Invalid file name'
; F
defm7 'No room for line'
; G
defm7 'STOP in INPUT' ; H
defm7 'FOR without NEXT'
; I
defm7 'Invalid I/O device'
; J
defm7 'Invalid colour' ; K
defm7 'BREAK into program'
; L
defm7 'RAMTOP no good' ; M
defm7 'Statement lost' ; N
defm7 'Invalid stream' ; O
defm7 'FN without DEF' ; P
defm7 'Parameter error' ; Q
defm7 'Tape loading error'
; R
; ; comma-sp
comma_sp:
defm7 ', ' ; used in report line.
; ; copyright
copyright:
defb 0x7F ; copyright
defm7 ' 1982 Sinclair Research Ltd'
; -------------
; REPORT-G
; -------------
; Note ERR_SP points here during line entry which allows the
; normal 'Out of Memory' report to be augmented to the more
; precise 'No Room for line' report.
;; REPORT-G
; No Room for line
REPORT_G:
ld a,0x10 ; i.e. 'G' -$30 -$07
ld bc,0x0000 ; this seems unnecessary.
jp MAIN_G ; jump back to MAIN-G
; -----------------------------
; Handle addition of BASIC line
; -----------------------------
; Note this is not a subroutine but a branch of the main execution loop.
; System variable ERR_SP still points to editing error handler.
; A new line is added to the BASIC program at the appropriate place.
; An existing line with same number is deleted first.
; Entering an existing line number deletes that line.
; Entering a non-existent line allows the subsequent line to be edited next.
;; MAIN-ADD
MAIN_ADD:
ld (E_PPC),bc ; set E_PPC to extracted line number.
ld hl,(CH_ADD) ; fetch CH_ADD - points to location after the
; initial digits (set in E_LINE_NO).
ex de,hl ; save start of BASIC in DE.
ld hl,REPORT_G ; Address: REPORT-G
push hl ; is pushed on stack and addressed by ERR_SP.
; the only error that can occur is
; 'Out of memory'.
ld hl,(WORKSP) ; fetch WORKSP - end of line.
scf ; prepare for true subtraction.
sbc hl,de ; find length of BASIC and
push hl ; save it on stack.
ld hl,bc ; transfer line number
; to HL register.
call LINE_ADDR ; routine LINE-ADDR will see if
; a line with the same number exists.
jr nz,MAIN_ADD1 ; forward if no existing line to MAIN-ADD1.
call NEXT_ONE ; routine NEXT-ONE finds the existing line.
call RECLAIM_2 ; routine RECLAIM-2 reclaims it.
;; MAIN-ADD1
MAIN_ADD1:
pop bc ; retrieve the length of the new line.
ld a,c ; and test if carriage return only
dec a ; i.e. one byte long.
or b ; result would be zero.
jr z,MAIN_ADD2 ; forward to MAIN-ADD2 is so.
push bc ; save the length again.
inc bc ; adjust for inclusion
inc bc ; of line number (two bytes)
inc bc ; and line length
inc bc ; (two bytes).
dec hl ; HL points to location before the destination
ld de,(PROG) ; fetch the address of PROG
push de ; and save it on the stack
call MAKE_ROOM ; routine MAKE-ROOM creates BC spaces in
; program area and updates pointers.
pop hl ; restore old program pointer.
ld (PROG),hl ; and put back in PROG as it may have been
; altered by the POINTERS routine.
pop bc ; retrieve BASIC length
push bc ; and save again.
inc de ; points to end of new area.
ld hl,(WORKSP) ; set HL to WORKSP - location after edit line.
dec hl ; decrement to address end marker.
dec hl ; decrement to address carriage return.
lddr ; copy the BASIC line back to initial command.
ld hl,(E_PPC) ; fetch E_PPC - line number.
ex de,hl ; swap it to DE, HL points to last of
; four locations.
pop bc ; retrieve length of line.
ldd (hl),b ; high byte last.
ldd (hl),c ; then low byte of length.
ldd (hl),e ; then low byte of line number.
ld (hl),d ; then high byte range $0 - $27 (1-9999).
;; MAIN-ADD2
MAIN_ADD2:
pop af ; drop the address of Report G
jp MAIN_EXEC ; and back to MAIN-EXEC producing a listing
; and to reset ERR_SP in EDITOR.
; ---------------------------------
; THE 'INITIAL CHANNEL' INFORMATION
; ---------------------------------
; This initial channel information is copied from ROM to RAM, during
; initialization. It's new location is after the system variables and is
; addressed by the system variable CHANS which means that it can slide up and
; down in memory. The table is never searched, by this ROM, and the last
; character, which could be anything other than a comma, provides a
; convenient resting place for DATADD.
;; init-chan
init_chan:
defw PRINT_OUT ; PRINT-OUT
defw KEY_INPUT ; KEY-INPUT
defb 0x4B ; 'K'
defw PRINT_OUT ; PRINT-OUT
defw REPORT_J ; REPORT-J
defb 0x53 ; 'S'
defw ADD_CHAR ; ADD-CHAR
defw REPORT_J ; REPORT-J
defb 0x52 ; 'R'
defw PRINT_OUT ; PRINT-OUT
defw REPORT_J ; REPORT-J
defb 0x50 ; 'P'
defb 0x80 ; End Marker
;; REPORT-J
REPORT_J:
rst 0x08 ; ERROR-1
defb 0x12 ; Error Report: Invalid I/O device
; -------------------------
; THE 'INITIAL STREAM' DATA
; -------------------------
; This is the initial stream data for the seven streams $FD - $03 that is
; copied from ROM to the STRMS system variables area during initialization.
; There are reserved locations there for another 12 streams. Each location
; contains an offset to the second byte of a channel. The first byte of a
; channel can't be used as that would result in an offset of zero for some
; and zero is used to denote that a stream is closed.
;; init-strm
init_strm:
defb 0x01,0x00 ; stream $FD offset to channel 'K'
defb 0x06,0x00 ; stream $FE offset to channel 'S'
defb 0x0B,0x00 ; stream $FF offset to channel 'R'
defb 0x01,0x00 ; stream $00 offset to channel 'K'
defb 0x01,0x00 ; stream $01 offset to channel 'K'
defb 0x06,0x00 ; stream $02 offset to channel 'S'
defb 0x10,0x00 ; stream $03 offset to channel 'P'
; ------------------------------
; THE 'INPUT CONTROL' SUBROUTINE
; ------------------------------
;
;; WAIT-KEY
WAIT_KEY:
bit 5,(iy+TV_FLAG-IY0) ; test TV_FLAG - clear lower screen ?
jr nz,WAIT_KEY1 ; forward to WAIT-KEY1 if so.
set 3,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal reprint the edit
; line to the lower screen.
;; WAIT-KEY1
WAIT_KEY1:
call INPUT_AD ; routine INPUT-AD is called.
ret c ; return with acceptable keys.
jr z,WAIT_KEY1 ; back to WAIT-KEY1 if no key is pressed
; or it has been handled within INPUT-AD.
; Note. When inputting from the keyboard all characters are returned with
; above conditions so this path is never taken.
;; REPORT-8
REPORT_8:
rst 0x08 ; ERROR-1
defb 0x07 ; Error Report: End of file
; ---------------------------
; THE 'INPUT ADDRESS' ROUTINE
; ---------------------------
; This routine fetches the address of the input stream from the current
; channel area using the system variable CURCHL.
;; INPUT-AD
INPUT_AD:
exx ; switch in alternate set.
push hl ; save HL register
ld hl,(CURCHL) ; fetch address of CURCHL - current channel.
inc hl ; step over output routine
inc hl ; to point to low byte of input routine.
jr CALL_SUB ; forward to CALL-SUB.
; -------------------------
; THE 'CODE OUTPUT' ROUTINE
; -------------------------
; This routine is called on five occasions to print the ASCII equivalent of
; a value 0-9.
;; OUT-CODE
OUT_CODE:
ld e,0x30 ; add 48 decimal to give the ASCII character
add a,e ; '0' to '9' and continue into the main output
; routine.
; -------------------------
; THE 'MAIN OUTPUT' ROUTINE
; -------------------------
; PRINT-A-2 is a continuation of the RST 10 restart that prints any character.
; The routine prints to the current channel and the printing of control codes
; may alter that channel to divert subsequent RST 10 instructions to temporary
; routines. The normal channel is $09F4.
;; PRINT-A-2
PRINT_A_2:
exx ; switch in alternate set
push hl ; save HL register
ld hl,(CURCHL) ; fetch CURCHL the current channel.
; input-ad rejoins here also.
;; CALL-SUB
CALL_SUB:
ldi e,(hl) ; put the low byte in E.
; advance address.
ld d,(hl) ; put the high byte to D.
ex de,hl ; transfer the stream to HL.
call CALL_JUMP ; use routine CALL-JUMP.
; in effect CALL (HL).
pop hl ; restore saved HL register.
exx ; switch back to the main set and
ret ; return.
; --------------------------
; THE 'OPEN CHANNEL' ROUTINE
; --------------------------
; This subroutine is used by the ROM to open a channel 'K', 'S', 'R' or 'P'.
; This is either for its own use or in response to a user's request, for
; example, when '#' is encountered with output - PRINT, LIST etc.
; or with input - INPUT, INKEY$ etc.
; It is entered with a system stream $FD - $FF, or a user stream $00 - $0F
; in the accumulator.
;; CHAN-OPEN
CHAN_OPEN:
add a,a ; double the stream ($FF will become $FE etc.)
add a,0x16 ; add the offset to stream 0 from $5C00
ld l,a ; result to L
ld h,0x5C ; now form the address in STRMS area.
ldi e,(hl) ; fetch low byte of CHANS offset
; address next
ld d,(hl) ; fetch high byte of offset
ld a,d ; test that the stream is open.
or e ; zero if closed.
jr nz,CHAN_OP_1 ; forward to CHAN-OP-1 if open.
;; REPORT-Oa
REPORT_Oa:
rst 0x08 ; ERROR-1
defb 0x17 ; Error Report: Invalid stream
; continue here if stream was open. Note that the offset is from CHANS
; to the second byte of the channel.
;; CHAN-OP-1
CHAN_OP_1:
dec de ; reduce offset so it points to the channel.
ld hl,(CHANS) ; fetch CHANS the location of the base of
; the channel information area
add hl,de ; and add the offset to address the channel.
; and continue to set flags.
; -----------------
; Set channel flags
; -----------------
; This subroutine is used from ED-EDIT, str$ and read-in to reset the
; current channel when it has been temporarily altered.
;; CHAN-FLAG
CHAN_FLAG:
ld (CURCHL),hl ; set CURCHL system variable to the
; address in HL
res 4,(iy+FLAGS2-IY0) ; update FLAGS2 - signal K channel not in use.
; Note. provide a default for channel 'R'.
inc hl ; advance past
inc hl ; output routine.
inc hl ; advance past
inc hl ; input routine.
ld c,(hl) ; pick up the letter.
ld hl,chn_cd_lu ; address: chn-cd-lu
call INDEXER ; routine INDEXER finds offset to a
; flag-setting routine.
ret nc ; but if the letter wasn't found in the
; table just return now. - channel 'R'.
ld d,0x00 ; prepare to add
ld e,(hl) ; offset to E
add hl,de ; add offset to location of offset to form
; address of routine
;; CALL-JUMP
CALL_JUMP:
jp (hl) ; jump to the routine
; Footnote. calling any location that holds JP (HL) is the equivalent to
; a pseudo Z80 instruction CALL (HL). The ROM uses the instruction above.
; --------------------------
; Channel code look-up table
; --------------------------
; This table is used by the routine above to find one of the three
; flag setting routines below it.
; A zero end-marker is required as channel 'R' is not present.
;; chn-cd-lu
chn_cd_lu:
defm 'K' ; offset $06 to CHAN-K
defb CHAN_K - $
defm 'S' ; offset $12 to CHAN-S
defb CHAN_S - $
defm 'P' ; offset $1B to CHAN-P
defb CHAN_P - $
defb 0x00 ; end marker.
; --------------
; Channel K flag
; --------------
; routine to set flags for lower screen/keyboard channel.
;; CHAN-K
CHAN_K:
set 0,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal lower screen in use
res 5,(iy+FLAGS-IY0) ; update FLAGS - signal no new key
set 4,(iy+FLAGS2-IY0) ; update FLAGS2 - signal K channel in use
jr CHAN_S_1 ; forward to CHAN-S-1 for indirect exit
; --------------
; Channel S flag
; --------------
; routine to set flags for upper screen channel.
;; CHAN-S
CHAN_S:
res 0,(iy+TV_FLAG-IY0) ; TV_FLAG - signal main screen in use
;; CHAN-S-1
CHAN_S_1:
res 1,(iy+FLAGS-IY0) ; update FLAGS - signal printer not in use
jp TEMPS ; jump back to TEMPS and exit via that
; routine after setting temporary attributes.
; --------------
; Channel P flag
; --------------
; This routine sets a flag so that subsequent print related commands
; print to printer or update the relevant system variables.
; This status remains in force until reset by the routine above.
;; CHAN-P
CHAN_P:
set 1,(iy+FLAGS-IY0) ; update FLAGS - signal printer in use
ret ; return
; --------------------------
; THE 'ONE SPACE' SUBROUTINE
; --------------------------
; This routine is called once only to create a single space
; in workspace by ADD-CHAR.
;; ONE-SPACE
ONE_SPACE:
ld bc,0x0001 ; create space for a single character.
; ---------
; Make Room
; ---------
; This entry point is used to create BC spaces in various areas such as
; program area, variables area, workspace etc..
; The entire free RAM is available to each BASIC statement.
; On entry, HL addresses where the first location is to be created.
; Afterwards, HL will point to the location before this.
;; MAKE-ROOM
MAKE_ROOM:
push hl ; save the address pointer.
call TEST_ROOM ; routine TEST-ROOM checks if room
; exists and generates an error if not.
pop hl ; restore the address pointer.
call POINTERS ; routine POINTERS updates the
; dynamic memory location pointers.
; DE now holds the old value of STKEND.
ld hl,(STKEND) ; fetch new STKEND the top destination.
ex de,hl ; HL now addresses the top of the area to
; be moved up - old STKEND.
lddr ; the program, variables, etc are moved up.
ret ; return with new area ready to be populated.
; HL points to location before new area,
; and DE to last of new locations.
; -----------------------------------------------
; Adjust pointers before making or reclaiming room
; -----------------------------------------------
; This routine is called by MAKE-ROOM to adjust upwards and by RECLAIM to
; adjust downwards the pointers within dynamic memory.
; The fourteen pointers to dynamic memory, starting with VARS and ending
; with STKEND, are updated adding BC if they are higher than the position
; in HL.
; The system variables are in no particular order except that STKEND, the first
; free location after dynamic memory must be the last encountered.
;; POINTERS
POINTERS:
push af ; preserve accumulator.
push hl ; put pos pointer on stack.
ld hl,VARS ; address VARS the first of the
ld a,0x0E ; fourteen variables to consider.
;; PTR-NEXT
PTR_NEXT:
ldi e,(hl) ; fetch the low byte of the system variable.
; advance address.
ld d,(hl) ; fetch high byte of the system variable.
ex (sp),hl ; swap pointer on stack with the variable
; pointer.
and a ; prepare to subtract.
sbc hl,de ; subtract variable address
add hl,de ; and add back
ex (sp),hl ; swap pos with system variable pointer
jr nc,PTR_DONE ; forward to PTR-DONE if var before pos
push de ; save system variable address.
ex de,hl ; transfer to HL
add hl,bc ; add the offset
ex de,hl ; back to DE
ldd (hl),d ; load high byte
; move back
ldi (hl),e ; load low byte
; advance to high byte
pop de ; restore old system variable address.
;; PTR-DONE
PTR_DONE:
inc hl ; address next system variable.
dec a ; decrease counter.
jr nz,PTR_NEXT ; back to PTR-NEXT if more.
ex de,hl ; transfer old value of STKEND to HL.
; Note. this has always been updated.
pop de ; pop the address of the position.
pop af ; pop preserved accumulator.
and a ; clear carry flag preparing to subtract.
sbc hl,de ; subtract position from old stkend
ld bc,hl ; to give number of data bytes
; to be moved.
inc bc ; increment as we also copy byte at old STKEND.
add hl,de ; recompute old stkend.
ex de,hl ; transfer to DE.
ret ; return.
; -------------------
; Collect line number
; -------------------
; This routine extracts a line number, at an address that has previously
; been found using LINE-ADDR, and it is entered at LINE-NO. If it encounters
; the program 'end-marker' then the previous line is used and if that
; should also be unacceptable then zero is used as it must be a direct
; command. The program end-marker is the variables end-marker $80, or
; if variables exist, then the first character of any variable name.
;; LINE-ZERO
LINE_ZERO:
defb 0x00,0x00 ; dummy line number used for direct commands
;; LINE-NO-A
LINE_NO_A:
ex de,hl ; fetch the previous line to HL and set
ld de,LINE_ZERO ; DE to LINE-ZERO should HL also fail.
; -> The Entry Point.
;; LINE-NO
LINE_NO:
ld a,(hl) ; fetch the high byte - max $2F
and 0xC0 ; mask off the invalid bits.
jr nz,LINE_NO_A ; to LINE-NO-A if an end-marker.
ldi d,(hl) ; reload the high byte.
; advance address.
ld e,(hl) ; pick up the low byte.
ret ; return from here.
; -------------------
; Handle reserve room
; -------------------
; This is a continuation of the restart BC-SPACES
;; RESERVE
RESERVE:
ld hl,(STKBOT) ; STKBOT first location of calculator stack
dec hl ; make one less than new location
call MAKE_ROOM ; routine MAKE-ROOM creates the room.
inc hl ; address the first new location
inc hl ; advance to second
pop bc ; restore old WORKSP
ld (WORKSP),bc ; system variable WORKSP was perhaps
; changed by POINTERS routine.
pop bc ; restore count for return value.
ex de,hl ; switch. DE = location after first new space
inc hl ; HL now location after new space
ret ; return.
; ---------------------------
; Clear various editing areas
; ---------------------------
; This routine sets the editing area, workspace and calculator stack
; to their minimum configurations as at initialization and indeed this
; routine could have been relied on to perform that task.
; This routine uses HL only and returns with that register holding
; WORKSP/STKBOT/STKEND though no use is made of this. The routines also
; reset MEM to its usual place in the systems variable area should it
; have been relocated to a FOR-NEXT variable. The main entry point
; SET-MIN is called at the start of the MAIN-EXEC loop and prior to
; displaying an error.
;; SET-MIN
SET_MIN:
ld hl,(E_LINE) ; fetch E_LINE
ld (hl),0x0D ; insert carriage return
ld (K_CUR),hl ; make K_CUR keyboard cursor point there.
inc hl ; next location
ldi (hl),0x80 ; holds end-marker $80
; next location becomes
ld (WORKSP),hl ; start of WORKSP
; This entry point is used prior to input and prior to the execution,
; or parsing, of each statement.
;; SET-WORK
SET_WORK:
ld hl,(WORKSP) ; fetch WORKSP value
ld (STKBOT),hl ; and place in STKBOT
; This entry point is used to move the stack back to its normal place
; after temporary relocation during line entry and also from ERROR-3
;; SET-STK
SET_STK:
ld hl,(STKBOT) ; fetch STKBOT value
ld (STKEND),hl ; and place in STKEND.
push hl ; perhaps an obsolete entry point.
ld hl,MEMBOT ; normal location of MEM-0
ld (MEM),hl ; is restored to system variable MEM.
pop hl ; saved value not required.
ret ; return.
; ------------------
; Reclaim edit-line?
; ------------------
; This seems to be legacy code from the ZX80/ZX81 as it is
; not used in this ROM.
; That task, in fact, is performed here by the dual-area routine CLEAR-SP.
; This routine is designed to deal with something that is known to be in the
; edit buffer and not workspace.
; On entry, HL must point to the end of the something to be deleted.
;; REC-EDIT
REC_EDIT:
ld de,(E_LINE) ; fetch start of edit line from E_LINE.
jp RECLAIM_1 ; jump forward to RECLAIM-1.
; --------------------------
; The Table INDEXING routine
; --------------------------
; This routine is used to search two-byte hash tables for a character
; held in C, returning the address of the following offset byte.
; if it is known that the character is in the table e.g. for priorities,
; then the table requires no zero end-marker. If this is not known at the
; outset then a zero end-marker is required and carry is set to signal
; success.
;; INDEXER-1
INDEXER_1:
inc hl ; address the next pair of values.
; -> The Entry Point.
;; INDEXER
INDEXER:
ld a,(hl) ; fetch the first byte of pair
and a ; is it the end-marker ?
ret z ; return with carry reset if so.
cp c ; is it the required character ?
inc hl ; address next location.
jr nz,INDEXER_1 ; back to INDEXER-1 if no match.
scf ; else set the carry flag.
ret ; return with carry set
; --------------------------------
; The Channel and Streams Routines
; --------------------------------
; A channel is an input/output route to a hardware device
; and is identified to the system by a single letter e.g. 'K' for
; the keyboard. A channel can have an input and output route
; associated with it in which case it is bi-directional like
; the keyboard. Others like the upper screen 'S' are output
; only and the input routine usually points to a report message.
; Channels 'K' and 'S' are system channels and it would be inappropriate
; to close the associated streams so a mechanism is provided to
; re-attach them. When the re-attachment is no longer required, then
; closing these streams resets them as at initialization.
; Early adverts said that the network and RS232 were in this ROM.
; Channels 'N' and 'B' are user channels and have been removed successfully
; if, as seems possible, they existed.
; Ironically the tape streamer is not accessed through streams and
; channels.
; Early demonstrations of the Spectrum showed a single microdrive being
; controlled by the main ROM.
; ---------------------
; THE 'CLOSE #' COMMAND
; ---------------------
; This command allows streams to be closed after use.
; Any temporary memory areas used by the stream would be reclaimed and
; finally flags set or reset if necessary.
;; CLOSE
CLOSE:
call STR_DATA ; routine STR-DATA fetches parameter
; from calculator stack and gets the
; existing STRMS data pointer address in HL
; and stream offset from CHANS in BC.
; Note. this offset could be zero if the
; stream is already closed. A check for this
; should occur now and an error should be
; generated, for example,
; Report S 'Stream status closed'.
call CLOSE_2 ; routine CLOSE-2 would perform any actions
; peculiar to that stream without disturbing
; data pointer to STRMS entry in HL.
ld bc,0x0000 ; the stream is to be blanked.
ld de,0xA3E2 ; the number of bytes from stream 4, $5C1E,
; to $10000
ex de,hl ; transfer offset to HL, STRMS data pointer
; to DE.
add hl,de ; add the offset to the data pointer.
jr c,CLOSE_1 ; forward to CLOSE-1 if a non-system stream.
; i.e. higher than 3.
; proceed with a negative result.
ld bc,init_strm+0x0E ; prepare the address of the byte after
; the initial stream data in ROM. ($15D4)
add hl,bc ; index into the data table with negative value.
ldi c,(hl) ; low byte to C
; address next.
ld b,(hl) ; high byte to B.
; and for streams 0 - 3 just enter the initial data back into the STRMS entry
; streams 0 - 2 can't be closed as they are shared by the operating system.
; -> for streams 4 - 15 then blank the entry.
;; CLOSE-1
CLOSE_1:
ex de,hl ; address of stream to HL.
ldi (hl),c ; place zero (or low byte).
; next address.
ld (hl),b ; place zero (or high byte).
ret ; return.
; ------------------------
; THE 'CLOSE-2' SUBROUTINE
; ------------------------
; There is not much point in coming here.
; The purpose was once to find the offset to a special closing routine,
; in this ROM and within 256 bytes of the close stream look up table that
; would reclaim any buffers associated with a stream. At least one has been
; removed.
; Any attempt to CLOSE streams $00 to $04, without first opening the stream,
; will lead to either a system restart or the production of a strange report.
; credit: Martin Wren-Hilton 1982.
;; CLOSE-2
CLOSE_2:
push hl ; * save address of stream data pointer
; in STRMS on the machine stack.
ld hl,(CHANS) ; fetch CHANS address to HL
add hl,bc ; add the offset to address the second
; byte of the output routine hopefully.
inc hl ; step past
inc hl ; the input routine.
; Note. When the Sinclair Interface1 is fitted then an instruction fetch
; on the next address pages this ROM out and the shadow ROM in.
;; ROM_TRAP
ROM_TRAP:
inc hl ; to address channel's letter
ld c,(hl) ; pick it up in C.
; Note. but if stream is already closed we
; get the value $10 (the byte preceding 'K').
ex de,hl ; save the pointer to the letter in DE.
; Note. The string pointer is saved but not used!!
ld hl,cl_str_lu ; address: cl-str-lu in ROM.
call INDEXER ; routine INDEXER uses the code to get
; the 8-bit offset from the current point to
; the address of the closing routine in ROM.
; Note. it won't find $10 there!
ld c,(hl) ; transfer the offset to C.
ld b,0x00 ; prepare to add.
add hl,bc ; add offset to point to the address of the
; routine that closes the stream.
; (and presumably removes any buffers that
; are associated with it.)
jp (hl) ; jump to that routine.
; --------------------------------
; THE 'CLOSE STREAM LOOK-UP' TABLE
; --------------------------------
; This table contains an entry for a letter found in the CHANS area.
; followed by an 8-bit displacement, from that byte's address in the
; table to the routine that performs any ancillary actions associated
; with closing the stream of that channel.
; The table doesn't require a zero end-marker as the letter has been
; picked up from a channel that has an open stream.
;; cl-str-lu
cl_str_lu:
defm 'K' ; offset 5 to CLOSE-STR
defb CLOSE_STR - $
defm 'S' ; offset 3 to CLOSE-STR
defb CLOSE_STR - $
defm 'P' ; offset 1 to CLOSE-STR
defb CLOSE_STR - $
; ------------------------------
; THE 'CLOSE STREAM' SUBROUTINES
; ------------------------------
; The close stream routines in fact have no ancillary actions to perform
; which is not surprising with regard to 'K' and 'S'.
;; CLOSE-STR
CLOSE_STR:
pop hl ; * now just restore the stream data pointer
ret ; in STRMS and return.
; -----------
; Stream data
; -----------
; This routine finds the data entry in the STRMS area for the specified
; stream which is passed on the calculator stack. It returns with HL
; pointing to this system variable and BC holding a displacement from
; the CHANS area to the second byte of the stream's channel. If BC holds
; zero, then that signifies that the stream is closed.
;; STR-DATA
STR_DATA:
call FIND_INT1 ; routine FIND-INT1 fetches parameter to A
cp 0x10 ; is it less than 16d ?
jr c,STR_DATA1 ; skip forward to STR-DATA1 if so.
;; REPORT-Ob
REPORT_Ob:
rst 0x08 ; ERROR-1
defb 0x17 ; Error Report: Invalid stream
;; STR-DATA1
STR_DATA1:
add a,0x03 ; add the offset for 3 system streams.
; range 00 - 15d becomes 3 - 18d.
rlca ; double as there are two bytes per
; stream - now 06 - 36d
ld hl,STRMS ; address STRMS - the start of the streams
; data area in system variables.
ld c,a ; transfer the low byte to A.
ld b,0x00 ; prepare to add offset.
add hl,bc ; add to address the data entry in STRMS.
; the data entry itself contains an offset from CHANS to the address of the
; stream
ld bc,(hl) ; low byte of displacement to C.
; address next.
; high byte of displacement to B.
; step back to leave HL pointing to STRMS
; data entry.
ret ; return with CHANS displacement in BC
; and address of stream data entry in HL.
; --------------------
; Handle OPEN# command
; --------------------
; Command syntax example: OPEN #5,"s"
; On entry the channel code entry is on the calculator stack with the next
; value containing the stream identifier. They have to swapped.
;; OPEN
OPEN:
rst 0x28 ; ; FP-CALC ;s,c.
defb 0x01 ; ;exchange ;c,s.
defb 0x38 ; ;end-calc
call STR_DATA ; routine STR-DATA fetches the stream off
; the stack and returns with the CHANS
; displacement in BC and HL addressing
; the STRMS data entry.
ld a,b ; test for zero which
or c ; indicates the stream is closed.
jr z,OPEN_1 ; skip forward to OPEN-1 if so.
; if it is a system channel then it can re-attached.
ex de,hl ; save STRMS address in DE.
ld hl,(CHANS) ; fetch CHANS.
add hl,bc ; add the offset to address the second
; byte of the channel.
inc hl ; skip over the
inc hl ; input routine.
inc hl ; and address the letter.
ld a,(hl) ; pick up the letter.
ex de,hl ; save letter pointer and bring back
; the STRMS pointer.
cp 0x4B ; is it 'K' ?
jr z,OPEN_1 ; forward to OPEN-1 if so
cp 0x53 ; is it 'S' ?
jr z,OPEN_1 ; forward to OPEN-1 if so
cp 0x50 ; is it 'P' ?
jr nz,REPORT_Ob ; back to REPORT-Ob if not.
; to report 'Invalid stream'.
; continue if one of the upper-case letters was found.
; and rejoin here from above if stream was closed.
;; OPEN-1
OPEN_1:
call OPEN_2 ; routine OPEN-2 opens the stream.
; it now remains to update the STRMS variable.
ldi (hl),e ; insert or overwrite the low byte.
; address high byte in STRMS.
ld (hl),d ; insert or overwrite the high byte.
ret ; return.
; -----------------
; OPEN-2 Subroutine
; -----------------
; There is some point in coming here as, as well as once creating buffers,
; this routine also sets flags.
;; OPEN-2
OPEN_2:
push hl ; * save the STRMS data entry pointer.
call STK_FETCH ; routine STK-FETCH now fetches the
; parameters of the channel string.
; start in DE, length in BC.
ld a,b ; test that it is not
or c ; the null string.
jr nz,OPEN_3 ; skip forward to OPEN-3 with 1 character
; or more!
;; REPORT-Fb
REPORT_Fb:
rst 0x08 ; ERROR-1
defb 0x0E ; Error Report: Invalid file name
;; OPEN-3
OPEN_3:
push bc ; save the length of the string.
ld a,(de) ; pick up the first character.
; Note. There can be more than one character.
and 0xDF ; make it upper-case.
ld c,a ; place it in C.
ld hl,op_str_lu ; address: op-str-lu is loaded.
call INDEXER ; routine INDEXER will search for letter.
jr nc,REPORT_Fb ; back to REPORT-F if not found
; 'Invalid filename'
ld c,(hl) ; fetch the displacement to opening routine.
ld b,0x00 ; prepare to add.
add hl,bc ; now form address of opening routine.
pop bc ; restore the length of string.
jp (hl) ; now jump forward to the relevant routine.
; -------------------------
; OPEN stream look-up table
; -------------------------
; The open stream look-up table consists of matched pairs.
; The channel letter is followed by an 8-bit displacement to the
; associated stream-opening routine in this ROM.
; The table requires a zero end-marker as the letter has been
; provided by the user and not the operating system.
;; op-str-lu
op_str_lu:
defm 'K' ; $06 offset to OPEN-K
defb OPEN_K - $
defm 'S' ; $08 offset to OPEN-S
defb OPEN_S - $
defm 'P' ; $0A offset to OPEN-P
defb OPEN_P - $
defb 0x00 ; end-marker.
; ----------------------------
; The Stream Opening Routines.
; ----------------------------
; These routines would have opened any buffers associated with the stream
; before jumping forward to OPEN-END with the displacement value in E
; and perhaps a modified value in BC. The strange pathing does seem to
; provide for flexibility in this respect.
;
; There is no need to open the printer buffer as it is there already
; even if you are still saving up for a ZX Printer or have moved onto
; something bigger. In any case it would have to be created after
; the system variables but apart from that it is a simple task
; and all but one of the ROM routines can handle a buffer in that position.
; (PR-ALL-6 would require an extra 3 bytes of code).
; However it wouldn't be wise to have two streams attached to the ZX Printer
; as you can now, so one assumes that if PR_CC_hi was non-zero then
; the OPEN-P routine would have refused to attach a stream if another
; stream was attached.
; Something of significance is being passed to these ghost routines in the
; second character. Strings 'RB', 'RT' perhaps or a drive/station number.
; The routine would have to deal with that and exit to OPEN_END with BC
; containing $0001 or more likely there would be an exit within the routine.
; Anyway doesn't matter, these routines are long gone.
; -----------------
; OPEN-K Subroutine
; -----------------
; Open Keyboard stream.
;; OPEN-K
OPEN_K:
ld e,0x01 ; 01 is offset to second byte of channel 'K'.
jr OPEN_END ; forward to OPEN-END
; -----------------
; OPEN-S Subroutine
; -----------------
; Open Screen stream.
;; OPEN-S
OPEN_S:
ld e,0x06 ; 06 is offset to 2nd byte of channel 'S'
jr OPEN_END ; to OPEN-END
; -----------------
; OPEN-P Subroutine
; -----------------
; Open Printer stream.
;; OPEN-P
OPEN_P:
ld e,0x10 ; 16d is offset to 2nd byte of channel 'P'
;; OPEN-END
OPEN_END:
dec bc ; the stored length of 'K','S','P' or
; whatever is now tested. ??
ld a,b ; test now if initial or residual length
or c ; is one character.
jr nz,REPORT_Fb ; to REPORT-Fb 'Invalid file name' if not.
ld d,a ; load D with zero to form the displacement
; in the DE register.
pop hl ; * restore the saved STRMS pointer.
ret ; return to update STRMS entry thereby
; signaling stream is open.
; ----------------------------------------
; Handle CAT, ERASE, FORMAT, MOVE commands
; ----------------------------------------
; These just generate an error report as the ROM is 'incomplete'.
;
; Luckily this provides a mechanism for extending these in a shadow ROM
; but without the powerful mechanisms set up in this ROM.
; An instruction fetch on $0008 may page in a peripheral ROM,
; e.g. the Sinclair Interface 1 ROM, to handle these commands.
; However that wasn't the plan.
; Development of this ROM continued for another three months until the cost
; of replacing it and the manual became unfeasible.
; The ultimate power of channels and streams died at birth.
;; CAT-ETC
CAT_ETC:
jr REPORT_Ob ; to REPORT-Ob
; -----------------
; Perform AUTO-LIST
; -----------------
; This produces an automatic listing in the upper screen.
;; AUTO-LIST
AUTO_LIST:
ld (LIST_SP),sp ; save stack pointer in LIST_SP
ld (iy+TV_FLAG-IY0),0x10
; update TV_FLAG set bit 3
call CL_ALL ; routine CL-ALL.
set 0,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal lower screen in use
ld b,(iy+DF_SZ-IY0) ; fetch DF_SZ to B.
call CL_LINE ; routine CL-LINE clears lower display
; preserving B.
res 0,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal main screen in use
set 0,(iy+FLAGS2-IY0) ; update FLAGS2 - signal will be necessary to
; clear main screen.
ld hl,(E_PPC) ; fetch E_PPC current edit line to HL.
ld de,(S_TOP) ; fetch S_TOP to DE, the current top line
; (initially zero)
and a ; prepare for true subtraction.
sbc hl,de ; subtract and
add hl,de ; add back.
jr c,AUTO_L_2 ; to AUTO-L-2 if S_TOP higher than E_PPC
; to set S_TOP to E_PPC
push de ; save the top line number.
call LINE_ADDR ; routine LINE-ADDR gets address of E_PPC.
ld de,0x02C0 ; prepare known number of characters in
; the default upper screen.
ex de,hl ; offset to HL, program address to DE.
sbc hl,de ; subtract high value from low to obtain
; negated result used in addition.
ex (sp),hl ; swap result with top line number on stack.
call LINE_ADDR ; routine LINE-ADDR gets address of that
; top line in HL and next line in DE.
pop bc ; restore the result to balance stack.
;; AUTO-L-1
AUTO_L_1:
push bc ; save the result.
call NEXT_ONE ; routine NEXT-ONE gets address in HL of
; line after auto-line (in DE).
pop bc ; restore result.
add hl,bc ; compute back.
jr c,AUTO_L_3 ; to AUTO-L-3 if line 'should' appear
ex de,hl ; address of next line to HL.
ldi d,(hl) ; get line
; number
ldd e,(hl) ; in DE.
; adjust back to start.
ld (S_TOP),de ; update S_TOP.
jr AUTO_L_1 ; to AUTO-L-1 until estimate reached.
; ---
; the jump was to here if S_TOP was greater than E_PPC
;; AUTO-L-2
AUTO_L_2:
ld (S_TOP),hl ; make S_TOP the same as E_PPC.
; continue here with valid starting point from above or good estimate
; from computation
;; AUTO-L-3
AUTO_L_3:
ld hl,(S_TOP) ; fetch S_TOP line number to HL.
call LINE_ADDR ; routine LINE-ADDR gets address in HL.
; address of next in DE.
jr z,AUTO_L_4 ; to AUTO-L-4 if line exists.
ex de,hl ; else use address of next line.
;; AUTO-L-4
AUTO_L_4:
call LIST_ALL ; routine LIST-ALL >>>
; The return will be to here if no scrolling occurred
res 4,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal no auto listing.
ret ; return.
; ------------
; Handle LLIST
; ------------
; A short form of LIST #3. The listing goes to stream 3 - default printer.
;; LLIST
LLIST:
ld a,0x03 ; the usual stream for ZX Printer
jr LIST_1 ; forward to LIST-1
; -----------
; Handle LIST
; -----------
; List to any stream.
; Note. While a starting line can be specified it is
; not possible to specify an end line.
; Just listing a line makes it the current edit line.
;; LIST
LIST:
ld a,0x02 ; default is stream 2 - the upper screen.
;; LIST-1
LIST_1:
ld (iy+TV_FLAG-IY0),0x00
; the TV_FLAG is initialized with bit 0 reset
; indicating upper screen in use.
call SYNTAX_Z ; routine SYNTAX-Z - checking syntax ?
call nz,CHAN_OPEN ; routine CHAN-OPEN if in run-time.
rst 0x18 ; GET-CHAR
call STR_ALTER ; routine STR-ALTER will alter if '#'.
jr c,LIST_4 ; forward to LIST-4 not a '#' .
rst 0x18 ; GET-CHAR
cp 0x3B ; is it ';' ?
jr z,LIST_2 ; skip to LIST-2 if so.
cp 0x2C ; is it ',' ?
jr nz,LIST_3 ; forward to LIST-3 if neither separator.
; we have, say, LIST #15, and a number must follow the separator.
;; LIST-2
LIST_2:
rst 0x20 ; NEXT-CHAR
call EXPT_1NUM ; routine EXPT-1NUM
jr LIST_5 ; forward to LIST-5
; ---
; the branch was here with just LIST #3 etc.
;; LIST-3
LIST_3:
call USE_ZERO ; routine USE-ZERO
jr LIST_5 ; forward to LIST-5
; ---
; the branch was here with LIST
;; LIST-4
LIST_4:
call FETCH_NUM ; routine FETCH-NUM checks if a number
; follows else uses zero.
;; LIST-5
LIST_5:
call CHECK_END ; routine CHECK-END quits if syntax OK >>>
call FIND_INT2 ; routine FIND-INT2 fetches the number
; from the calculator stack in run-time.
ld a,b ; fetch high byte of line number and
and 0x3F ; make less than $40 so that NEXT-ONE
; (from LINE-ADDR) doesn't lose context.
; Note. this is not satisfactory and the typo
; LIST 20000 will list an entirely different
; section than LIST 2000. Such typos are not
; available for checking if they are direct
; commands.
ld h,a ; transfer the modified
ld l,c ; line number to HL.
ld (E_PPC),hl ; update E_PPC to new line number.
call LINE_ADDR ; routine LINE-ADDR gets the address of the
; line.
; This routine is called from AUTO-LIST
;; LIST-ALL
LIST_ALL:
ld e,0x01 ; signal current line not yet printed
;; LIST-ALL-2
LIST_ALL_2:
call OUT_LINE ; routine OUT-LINE outputs a BASIC line
; using PRINT-OUT and makes an early return
; when no more lines to print. >>>
rst 0x10 ; PRINT-A prints the carriage return (in A)
bit 4,(iy+TV_FLAG-IY0) ; test TV_FLAG - automatic listing ?
jr z,LIST_ALL_2 ; back to LIST-ALL-2 if not
; (loop exit is via OUT-LINE)
; continue here if an automatic listing required.
ld a,(DF_SZ) ; fetch DF_SZ lower display file size.
sub (iy+S_POSN_hi-IY0) ; subtract S_POSN_hi ithe current line number.
jr nz,LIST_ALL_2 ; back to LIST-ALL-2 if upper screen not full.
xor e ; A contains zero, E contains one if the
; current edit line has not been printed
; or zero if it has (from OUT-LINE).
ret z ; return if the screen is full and the line
; has been printed.
; continue with automatic listings if the screen is full and the current
; edit line is missing. OUT-LINE will scroll automatically.
push hl ; save the pointer address.
push de ; save the E flag.
ld hl,S_TOP ; fetch S_TOP the rough estimate.
call LN_FETCH ; routine LN-FETCH updates S_TOP with
; the number of the next line.
pop de ; restore the E flag.
pop hl ; restore the address of the next line.
jr LIST_ALL_2 ; back to LIST-ALL-2.
; ------------------------
; Print a whole BASIC line
; ------------------------
; This routine prints a whole BASIC line and it is called
; from LIST-ALL to output the line to current channel
; and from ED-EDIT to 'sprint' the line to the edit buffer.
;; OUT-LINE
OUT_LINE:
ld bc,(E_PPC) ; fetch E_PPC the current line which may be
; unchecked and not exist.
call CP_LINES ; routine CP-LINES finds match or line after.
ld d,0x3E ; prepare cursor '>' in D.
jr z,OUT_LINE1 ; to OUT-LINE1 if matched or line after.
ld de,0x0000 ; put zero in D, to suppress line cursor.
rl e ; pick up carry in E if line before current
; leave E zero if same or after.
;; OUT-LINE1
OUT_LINE1:
ld (iy+BREG-IY0),e ; save flag in BREG which is spare.
ld a,(hl) ; get high byte of line number.
cp 0x40 ; is it too high ($2F is maximum possible) ?
pop bc ; drop the return address and
ret nc ; make an early return if so >>>
push bc ; save return address
call OUT_NUM_2 ; routine OUT-NUM-2 to print addressed number
; with leading space.
inc hl ; skip low number byte.
inc hl ; and the two
inc hl ; length bytes.
res 0,(iy+FLAGS-IY0) ; update FLAGS - signal leading space required.
ld a,d ; fetch the cursor.
and a ; test for zero.
jr z,OUT_LINE3 ; to OUT-LINE3 if zero.
rst 0x10 ; PRINT-A prints '>' the current line cursor.
; this entry point is called from ED-COPY
;; OUT-LINE2
OUT_LINE2:
set 0,(iy+FLAGS-IY0) ; update FLAGS - suppress leading space.
;; OUT-LINE3
OUT_LINE3:
push de ; save flag E for a return value.
ex de,hl ; save HL address in DE.
res 2,(iy+FLAGS2-IY0) ; update FLAGS2 - signal NOT in QUOTES.
ld hl,FLAGS ; point to FLAGS.
res 2,(hl) ; signal 'K' mode. (starts before keyword)
bit 5,(iy+FLAGX-IY0) ; test FLAGX - input mode ?
jr z,OUT_LINE4 ; forward to OUT-LINE4 if not.
set 2,(hl) ; signal 'L' mode. (used for input)
;; OUT-LINE4
OUT_LINE4:
ld hl,(X_PTR) ; fetch X_PTR - possibly the error pointer
; address.
and a ; clear the carry flag.
sbc hl,de ; test if an error address has been reached.
jr nz,OUT_LINE5 ; forward to OUT-LINE5 if not.
ld a,0x3F ; load A with '?' the error marker.
call OUT_FLASH ; routine OUT-FLASH to print flashing marker.
;; OUT-LINE5
OUT_LINE5:
call OUT_CURS ; routine OUT-CURS will print the cursor if
; this is the right position.
ex de,hl ; restore address pointer to HL.
ld a,(hl) ; fetch the addressed character.
call NUMBER ; routine NUMBER skips a hidden floating
; point number if present.
inc hl ; now increment the pointer.
cp 0x0D ; is character end-of-line ?
jr z,OUT_LINE6 ; to OUT-LINE6, if so, as line is finished.
ex de,hl ; save the pointer in DE.
call OUT_CHAR ; routine OUT-CHAR to output character/token.
jr OUT_LINE4 ; back to OUT-LINE4 until entire line is done.
; ---
;; OUT-LINE6
OUT_LINE6:
pop de ; bring back the flag E, zero if current
; line printed else 1 if still to print.
ret ; return with A holding $0D
; -------------------------
; Check for a number marker
; -------------------------
; this subroutine is called from two processes. while outputting BASIC lines
; and while searching statements within a BASIC line.
; during both, this routine will pass over an invisible number indicator
; and the five bytes floating-point number that follows it.
; Note that this causes floating point numbers to be stripped from
; the BASIC line when it is fetched to the edit buffer by OUT_LINE.
; the number marker also appears after the arguments of a DEF FN statement
; and may mask old 5-byte string parameters.
;; NUMBER
NUMBER:
cp 0x0E ; character fourteen ?
ret nz ; return if not.
inc hl ; skip the character
inc hl ; and five bytes
inc hl ; following.
inc hl
inc hl
inc hl
ld a,(hl) ; fetch the following character
ret ; for return value.
; --------------------------
; Print a flashing character
; --------------------------
; This subroutine is called from OUT-LINE to print a flashing error
; marker '?' or from the next routine to print a flashing cursor e.g. 'L'.
; However, this only gets called from OUT-LINE when printing the edit line
; or the input buffer to the lower screen so a direct call to $09F4 can
; be used, even though out-line outputs to other streams.
; In fact the alternate set is used for the whole routine.
;; OUT-FLASH
OUT_FLASH:
exx ; switch in alternate set
ld hl,(ATTR_T) ; fetch L = ATTR_T, H = MASK-T
push hl ; save masks.
res 7,h ; reset flash mask bit so active.
set 7,l ; make attribute FLASH.
ld (ATTR_T),hl ; resave ATTR_T and MASK-T
ld hl,P_FLAG ; address P_FLAG
ld d,(hl) ; fetch to D
push de ; and save.
ld (hl),0x00 ; clear inverse, over, ink/paper 9
call PRINT_OUT ; routine PRINT-OUT outputs character
; without the need to vector via RST 10.
pop hl ; pop P_FLAG to H.
ld (iy+P_FLAG-IY0),h ; and restore system variable P_FLAG.
pop hl ; restore temporary masks
ld (ATTR_T),hl ; and restore system variables ATTR_T/MASK_T
exx ; switch back to main set
ret ; return
; ----------------
; Print the cursor
; ----------------
; This routine is called before any character is output while outputting
; a BASIC line or the input buffer. This includes listing to a printer
; or screen, copying a BASIC line to the edit buffer and printing the
; input buffer or edit buffer to the lower screen. It is only in the
; latter two cases that it has any relevance and in the last case it
; performs another very important function also.
;; OUT-CURS
OUT_CURS:
ld hl,(K_CUR) ; fetch K_CUR the current cursor address
and a ; prepare for true subtraction.
sbc hl,de ; test against pointer address in DE and
ret nz ; return if not at exact position.
; the value of MODE, maintained by KEY-INPUT, is tested and if non-zero
; then this value 'E' or 'G' will take precedence.
ld a,(MODE) ; fetch MODE 0='KLC', 1='E', 2='G'.
rlc a ; double the value and set flags.
jr z,OUT_C_1 ; to OUT-C-1 if still zero ('KLC').
add a,0x43 ; add 'C' - will become 'E' if originally 1
; or 'G' if originally 2.
jr OUT_C_2 ; forward to OUT-C-2 to print.
; ---
; If mode was zero then, while printing a BASIC line, bit 2 of flags has been
; set if 'THEN' or ':' was encountered as a main character and reset otherwise.
; This is now used to determine if the 'K' cursor is to be printed but this
; transient state is also now transferred permanently to bit 3 of FLAGS
; to let the interrupt routine know how to decode the next key.
;; OUT-C-1
OUT_C_1:
ld hl,FLAGS ; Address FLAGS
res 3,(hl) ; signal 'K' mode initially.
ld a,0x4B ; prepare letter 'K'.
bit 2,(hl) ; test FLAGS - was the
; previous main character ':' or 'THEN' ?
jr z,OUT_C_2 ; forward to OUT-C-2 if so to print.
set 3,(hl) ; signal 'L' mode to interrupt routine.
; Note. transient bit has been made permanent.
inc a ; augment from 'K' to 'L'.
bit 3,(iy+FLAGS2-IY0) ; test FLAGS2 - consider caps lock ?
; which is maintained by KEY-INPUT.
jr z,OUT_C_2 ; forward to OUT-C-2 if not set to print.
ld a,0x43 ; alter 'L' to 'C'.
;; OUT-C-2
OUT_C_2:
push de ; save address pointer but OK as OUT-FLASH
; uses alternate set without RST 10.
call OUT_FLASH ; routine OUT-FLASH to print.
pop de ; restore and
ret ; return.
; ----------------------------
; Get line number of next line
; ----------------------------
; These two subroutines are called while editing.
; This entry point is from ED-DOWN with HL addressing E_PPC
; to fetch the next line number.
; Also from AUTO-LIST with HL addressing S_TOP just to update S_TOP
; with the value of the next line number. It gets fetched but is discarded.
; These routines never get called while the editor is being used for input.
;; LN-FETCH
LN_FETCH:
ldi e,(hl) ; fetch low byte
; address next
ld d,(hl) ; fetch high byte.
push hl ; save system variable hi pointer.
ex de,hl ; line number to HL,
inc hl ; increment as a starting point.
call LINE_ADDR ; routine LINE-ADDR gets address in HL.
call LINE_NO ; routine LINE-NO gets line number in DE.
pop hl ; restore system variable hi pointer.
; This entry point is from the ED-UP with HL addressing E_PPC_hi
;; LN-STORE
LN_STORE:
bit 5,(iy+FLAGX-IY0) ; test FLAGX - input mode ?
ret nz ; return if so.
; Note. above already checked by ED-UP/ED-DOWN.
ldd (hl),d ; save high byte of line number.
; address lower
ld (hl),e ; save low byte of line number.
ret ; return.
; -----------------------------------------
; Outputting numbers at start of BASIC line
; -----------------------------------------
; This routine entered at OUT-SP-NO is used to compute then output the first
; three digits of a 4-digit BASIC line printing a space if necessary.
; The line number, or residual part, is held in HL and the BC register
; holds a subtraction value -1000, -100 or -10.
; Note. for example line number 200 -
; space(out_char), 2(out_code), 0(out_char) final number always out-code.
;; OUT-SP-2
OUT_SP_2:
ld a,e ; will be space if OUT-CODE not yet called.
; or $FF if spaces are suppressed.
; else $30 ('0').
; (from the first instruction at OUT-CODE)
; this guy is just too clever.
and a ; test bit 7 of A.
ret m ; return if $FF, as leading spaces not
; required. This is set when printing line
; number and statement in MAIN-5.
jr OUT_CHAR ; forward to exit via OUT-CHAR.
; ---
; -> the single entry point.
;; OUT-SP-NO
OUT_SP_NO:
xor a ; initialize digit to 0
;; OUT-SP-1
OUT_SP_1:
add hl,bc ; add negative number to HL.
inc a ; increment digit
jr c,OUT_SP_1 ; back to OUT-SP-1 until no carry from
; the addition.
sbc hl,bc ; cancel the last addition
dec a ; and decrement the digit.
jr z,OUT_SP_2 ; back to OUT-SP-2 if it is zero.
jp OUT_CODE ; jump back to exit via OUT-CODE. ->
; -------------------------------------
; Outputting characters in a BASIC line
; -------------------------------------
; This subroutine ...
;; OUT-CHAR
OUT_CHAR:
call NUMERIC ; routine NUMERIC tests if it is a digit ?
jr nc,OUT_CH_3 ; to OUT-CH-3 to print digit without
; changing mode. Will be 'K' mode if digits
; are at beginning of edit line.
cp 0x21 ; less than quote character ?
jr c,OUT_CH_3 ; to OUT-CH-3 to output controls and space.
res 2,(iy+FLAGS-IY0) ; initialize FLAGS to 'K' mode and leave
; unchanged if this character would precede
; a keyword.
cp 0xCB ; is character 'THEN' token ?
jr z,OUT_CH_3 ; to OUT-CH-3 to output if so.
cp 0x3A ; is it ':' ?
jr nz,OUT_CH_1 ; to OUT-CH-1 if not statement separator
; to change mode back to 'L'.
bit 5,(iy+FLAGX-IY0) ; FLAGX - Input Mode ??
jr nz,OUT_CH_2 ; to OUT-CH-2 if in input as no statements.
; Note. this check should seemingly be at
; the start. Commands seem inappropriate in
; INPUT mode and are rejected by the syntax
; checker anyway.
; unless INPUT LINE is being used.
bit 2,(iy+FLAGS2-IY0) ; test FLAGS2 - is the ':' within quotes ?
jr z,OUT_CH_3 ; to OUT-CH-3 if ':' is outside quoted text.
jr OUT_CH_2 ; to OUT-CH-2 as ':' is within quotes
; ---
;; OUT-CH-1
OUT_CH_1:
cp 0x22 ; is it quote character '"' ?
jr nz,OUT_CH_2 ; to OUT-CH-2 with others to set 'L' mode.
push af ; save character.
ld a,(FLAGS2) ; fetch FLAGS2.
xor 0x04 ; toggle the quotes flag.
ld (FLAGS2),a ; update FLAGS2
pop af ; and restore character.
;; OUT-CH-2
OUT_CH_2:
set 2,(iy+FLAGS-IY0) ; update FLAGS - signal L mode if the cursor
; is next.
;; OUT-CH-3
OUT_CH_3:
rst 0x10 ; PRINT-A vectors the character to
; channel 'S', 'K', 'R' or 'P'.
ret ; return.
; -------------------------------------------
; Get starting address of line, or line after
; -------------------------------------------
; This routine is used often to get the address, in HL, of a BASIC line
; number supplied in HL, or failing that the address of the following line
; and the address of the previous line in DE.
;; LINE-ADDR
LINE_ADDR:
push hl ; save line number in HL register
ld hl,(PROG) ; fetch start of program from PROG
ld de,hl ; transfer address to
; the DE register pair.
;; LINE-AD-1
LINE_AD_1:
pop bc ; restore the line number to BC
call CP_LINES ; routine CP-LINES compares with that
; addressed by HL
ret nc ; return if line has been passed or matched.
; if NZ, address of previous is in DE
push bc ; save the current line number
call NEXT_ONE ; routine NEXT-ONE finds address of next
; line number in DE, previous in HL.
ex de,hl ; switch so next in HL
jr LINE_AD_1 ; back to LINE-AD-1 for another comparison
; --------------------
; Compare line numbers
; --------------------
; This routine compares a line number supplied in BC with an addressed
; line number pointed to by HL.
;; CP-LINES
CP_LINES:
ld a,(hl) ; Load the high byte of line number and
cp b ; compare with that of supplied line number.
ret nz ; return if yet to match (carry will be set).
inc hl ; address low byte of
ldd a,(hl) ; number and pick up in A.
; step back to first position.
cp c ; now compare.
ret ; zero set if exact match.
; carry set if yet to match.
; no carry indicates a match or
; next available BASIC line or
; program end marker.
; -------------------
; Find each statement
; -------------------
; The single entry point EACH-STMT is used to
; 1) To find the D'th statement in a line.
; 2) To find a token in held E.
;; not-used
not_used:
inc hl
inc hl
inc hl
; -> entry point.
;; EACH-STMT
EACH_STMT:
ld (CH_ADD),hl ; save HL in CH_ADD
ld c,0x00 ; initialize quotes flag
;; EACH-S-1
EACH_S_1:
dec d ; decrease statement count
ret z ; return if zero
rst 0x20 ; NEXT-CHAR
cp e ; is it the search token ?
jr nz,EACH_S_3 ; forward to EACH-S-3 if not
and a ; clear carry
ret ; return signalling success.
; ---
;; EACH-S-2
EACH_S_2:
inc hl ; next address
ld a,(hl) ; next character
;; EACH-S-3
EACH_S_3:
call NUMBER ; routine NUMBER skips if number marker
ld (CH_ADD),hl ; save in CH_ADD
cp 0x22 ; is it quotes '"' ?
jr nz,EACH_S_4 ; to EACH-S-4 if not
dec c ; toggle bit 0 of C
;; EACH-S-4
EACH_S_4:
cp 0x3A ; is it ':'
jr z,EACH_S_5 ; to EACH-S-5
cp 0xCB ; 'THEN'
jr nz,EACH_S_6 ; to EACH-S-6
;; EACH-S-5
EACH_S_5:
bit 0,c ; is it in quotes
jr z,EACH_S_1 ; to EACH-S-1 if not
;; EACH-S-6
EACH_S_6:
cp 0x0D ; end of line ?
jr nz,EACH_S_2 ; to EACH-S-2
dec d ; decrease the statement counter
; which should be zero else
; 'Statement Lost'.
scf ; set carry flag - not found
ret ; return
; -----------------------------------------------------------------------
; Storage of variables. For full details - see chapter 24.
; ZX Spectrum BASIC Programming by Steven Vickers 1982.
; It is bits 7-5 of the first character of a variable that allow
; the six types to be distinguished. Bits 4-0 are the reduced letter.
; So any variable name is higher that $3F and can be distinguished
; also from the variables area end-marker $80.
;
; 76543210 meaning brief outline of format.
; -------- ------------------------ -----------------------
; 010 string variable. 2 byte length + contents.
; 110 string array. 2 byte length + contents.
; 100 array of numbers. 2 byte length + contents.
; 011 simple numeric variable. 5 bytes.
; 101 variable length named numeric. 5 bytes.
; 111 for-next loop variable. 18 bytes.
; 10000000 the variables area end-marker.
;
; Note. any of the above seven will serve as a program end-marker.
;
; -----------------------------------------------------------------------
; ------------
; Get next one
; ------------
; This versatile routine is used to find the address of the next line
; in the program area or the next variable in the variables area.
; The reason one routine is made to handle two apparently unrelated tasks
; is that it can be called indiscriminately when merging a line or a
; variable.
;; NEXT-ONE
NEXT_ONE:
push hl ; save the pointer address.
ld a,(hl) ; get first byte.
cp 0x40 ; compare with upper limit for line numbers.
jr c,NEXT_O_3 ; forward to NEXT-O-3 if within BASIC area.
; the continuation here is for the next variable unless the supplied
; line number was erroneously over 16383. see RESTORE command.
bit 5,a ; is it a string or an array variable ?
jr z,NEXT_O_4 ; forward to NEXT-O-4 to compute length.
add a,a ; test bit 6 for single-character variables.
jp m,NEXT_O_1 ; forward to NEXT-O-1 if so
ccf ; clear the carry for long-named variables.
; it remains set for for-next loop variables.
;; NEXT-O-1
NEXT_O_1:
ld bc,0x0005 ; set BC to 5 for floating point number
jr nc,NEXT_O_2 ; forward to NEXT-O-2 if not a for/next
; variable.
ld c,0x12 ; set BC to eighteen locations.
; value, limit, step, line and statement.
; now deal with long-named variables
;; NEXT-O-2
NEXT_O_2:
rla ; test if character inverted. carry will also
; be set for single character variables
inc hl ; address next location.
ld a,(hl) ; and load character.
jr nc,NEXT_O_2 ; back to NEXT-O-2 if not inverted bit.
; forward immediately with single character
; variable names.
jr NEXT_O_5 ; forward to NEXT-O-5 to add length of
; floating point number(s etc.).
; ---
; this branch is for line numbers.
;; NEXT-O-3
NEXT_O_3:
inc hl ; increment pointer to low byte of line no.
; strings and arrays rejoin here
;; NEXT-O-4
NEXT_O_4:
inc hl ; increment to address the length low byte.
ldi bc,(hl) ; transfer to C and
; point to high byte of length.
; transfer that to B
; point to start of BASIC/variable contents.
; the three types of numeric variables rejoin here
;; NEXT-O-5
NEXT_O_5:
add hl,bc ; add the length to give address of next
; line/variable in HL.
pop de ; restore previous address to DE.
; ------------------
; Difference routine
; ------------------
; This routine terminates the above routine and is also called from the
; start of the next routine to calculate the length to reclaim.
;; DIFFER
DIFFER:
and a ; prepare for true subtraction.
sbc hl,de ; subtract the two pointers.
ld bc,hl ; transfer result
; to BC register pair.
add hl,de ; add back
ex de,hl ; and switch pointers
ret ; return values are the length of area in BC,
; low pointer (previous) in HL,
; high pointer (next) in DE.
; -----------------------
; Handle reclaiming space
; -----------------------
;
;; RECLAIM-1
RECLAIM_1:
call DIFFER ; routine DIFFER immediately above
;; RECLAIM-2
RECLAIM_2:
push bc
ld a,b
cpl
ld b,a
ld a,c
cpl
ld c,a
inc bc
call POINTERS ; routine POINTERS
ex de,hl
pop hl
add hl,de
push de
ldir ; copy bytes
pop hl
ret
; ----------------------------------------
; Read line number of line in editing area
; ----------------------------------------
; This routine reads a line number in the editing area returning the number
; in the BC register or zero if no digits exist before commands.
; It is called from LINE-SCAN to check the syntax of the digits.
; It is called from MAIN-3 to extract the line number in preparation for
; inclusion of the line in the BASIC program area.
;
; Interestingly the calculator stack is moved from its normal place at the
; end of dynamic memory to an adequate area within the system variables area.
; This ensures that in a low memory situation, that valid line numbers can
; be extracted without raising an error and that memory can be reclaimed
; by deleting lines. If the stack was in its normal place then a situation
; arises whereby the Spectrum becomes locked with no means of reclaiming space.
;; E-LINE-NO
E_LINE_NO:
ld hl,(E_LINE) ; load HL from system variable E_LINE.
dec hl ; decrease so that NEXT_CHAR can be used
; without skipping the first digit.
ld (CH_ADD),hl ; store in the system variable CH_ADD.
rst 0x20 ; NEXT-CHAR skips any noise and white-space
; to point exactly at the first digit.
ld hl,MEMBOT ; use MEM-0 as a temporary calculator stack
; an overhead of three locations are needed.
ld (STKEND),hl ; set new STKEND.
call INT_TO_FP ; routine INT-TO-FP will read digits till
; a non-digit found.
call FP_TO_BC ; routine FP-TO-BC will retrieve number
; from stack at membot.
jr c,E_L_1 ; forward to E-L-1 if overflow i.e. > 65535.
; 'Nonsense in BASIC'
ld hl,0xD8F0 ; load HL with value -9999
add hl,bc ; add to line number in BC
;; E-L-1
E_L_1:
jp c,REPORT_C ; to REPORT-C 'Nonsense in BASIC' if over.
; Note. As ERR_SP points to ED_ERROR
; the report is never produced although
; the RST $08 will update X_PTR leading to
; the error marker being displayed when
; the ED_LOOP is reiterated.
; in fact, since it is immediately
; cancelled, any report will do.
; a line in the range 0 - 9999 has been entered.
jp SET_STK ; jump back to SET-STK to set the calculator
; stack back to its normal place and exit
; from there.
; ---------------------------------
; Report and line number outputting
; ---------------------------------
; Entry point OUT-NUM-1 is used by the Error Reporting code to print
; the line number and later the statement number held in BC.
; If the statement was part of a direct command then -2 is used as a
; dummy line number so that zero will be printed in the report.
; This routine is also used to print the exponent of E-format numbers.
;
; Entry point OUT-NUM-2 is used from OUT-LINE to output the line number
; addressed by HL with leading spaces if necessary.
;; OUT-NUM-1
OUT_NUM_1:
push de ; save the
push hl ; registers.
xor a ; set A to zero.
bit 7,b ; is the line number minus two ?
jr nz,OUT_NUM_4 ; forward to OUT-NUM-4 if so to print zero
; for a direct command.
ld hl,bc ; transfer the
; number to HL.
ld e,0xFF ; signal 'no leading zeros'.
jr OUT_NUM_3 ; forward to continue at OUT-NUM-3
; ---
; from OUT-LINE - HL addresses line number.
;; OUT-NUM-2
OUT_NUM_2:
push de ; save flags
ldi d,(hl) ; high byte to D
; address next
ld e,(hl) ; low byte to E
push hl ; save pointer
ex de,hl ; transfer number to HL
ld e,0x20 ; signal 'output leading spaces'
;; OUT-NUM-3
OUT_NUM_3:
ld bc,0xFC18 ; value -1000
call OUT_SP_NO ; routine OUT-SP-NO outputs space or number
ld bc,0xFF9C ; value -100
call OUT_SP_NO ; routine OUT-SP-NO
ld c,0xF6 ; value -10 ( B is still $FF )
call OUT_SP_NO ; routine OUT-SP-NO
ld a,l ; remainder to A.
;; OUT-NUM-4
OUT_NUM_4:
call OUT_CODE ; routine OUT-CODE for final digit.
; else report code zero wouldn't get
; printed.
pop hl ; restore the
pop de ; registers and
ret ; return.
;***************************************************
;** Part 7. BASIC LINE AND COMMAND INTERPRETATION **
;***************************************************
; ----------------
; The offset table
; ----------------
; The BASIC interpreter has found a command code $CE - $FF
; which is then reduced to range $00 - $31 and added to the base address
; of this table to give the address of an offset which, when added to
; the offset therein, gives the location in the following parameter table
; where a list of class codes, separators and addresses relevant to the
; command exists.
;; offst-tbl
offst_tbl:
defb P_DEF_FN - $ ; B1 offset to Address: P-DEF-FN
defb P_CAT - $ ; CB offset to Address: P-CAT
defb P_FORMAT - $ ; BC offset to Address: P-FORMAT
defb P_MOVE - $ ; BF offset to Address: P-MOVE
defb P_ERASE - $ ; C4 offset to Address: P-ERASE
defb P_OPEN - $ ; AF offset to Address: P-OPEN
defb P_CLOSE - $ ; B4 offset to Address: P-CLOSE
defb P_MERGE - $ ; 93 offset to Address: P-MERGE
defb P_VERIFY - $ ; 91 offset to Address: P-VERIFY
defb P_BEEP - $ ; 92 offset to Address: P-BEEP
defb P_CIRCLE - $ ; 95 offset to Address: P-CIRCLE
defb P_INK - $ ; 98 offset to Address: P-INK
defb P_PAPER - $ ; 98 offset to Address: P-PAPER
defb P_FLASH - $ ; 98 offset to Address: P-FLASH
defb P_BRIGHT - $ ; 98 offset to Address: P-BRIGHT
defb P_INVERSE - $ ; 98 offset to Address: P-INVERSE
defb P_OVER - $ ; 98 offset to Address: P-OVER
defb P_OUT - $ ; 98 offset to Address: P-OUT
defb P_LPRINT - $ ; 7F offset to Address: P-LPRINT
defb P_LLIST - $ ; 81 offset to Address: P-LLIST
defb P_STOP - $ ; 2E offset to Address: P-STOP
defb P_READ - $ ; 6C offset to Address: P-READ
defb P_DATA - $ ; 6E offset to Address: P-DATA
defb P_RESTORE - $ ; 70 offset to Address: P-RESTORE
defb P_NEW - $ ; 48 offset to Address: P-NEW
defb P_BORDER - $ ; 94 offset to Address: P-BORDER
defb P_CONT - $ ; 56 offset to Address: P-CONT
defb P_DIM - $ ; 3F offset to Address: P-DIM
defb P_REM - $ ; 41 offset to Address: P-REM
defb P_FOR - $ ; 2B offset to Address: P-FOR
defb P_GO_TO - $ ; 17 offset to Address: P-GO-TO
defb P_GO_SUB - $ ; 1F offset to Address: P-GO-SUB
defb P_INPUT - $ ; 37 offset to Address: P-INPUT
defb P_LOAD - $ ; 77 offset to Address: P-LOAD
defb P_LIST - $ ; 44 offset to Address: P-LIST
defb P_LET - $ ; 0F offset to Address: P-LET
defb P_PAUSE - $ ; 59 offset to Address: P-PAUSE
defb P_NEXT - $ ; 2B offset to Address: P-NEXT
defb P_POKE - $ ; 43 offset to Address: P-POKE
defb P_PRINT - $ ; 2D offset to Address: P-PRINT
defb P_PLOT - $ ; 51 offset to Address: P-PLOT
defb P_RUN - $ ; 3A offset to Address: P-RUN
defb P_SAVE - $ ; 6D offset to Address: P-SAVE
defb P_RANDOM - $ ; 42 offset to Address: P-RANDOM
defb P_IF - $ ; 0D offset to Address: P-IF
defb P_CLS - $ ; 49 offset to Address: P-CLS
defb P_DRAW - $ ; 5C offset to Address: P-DRAW
defb P_CLEAR - $ ; 44 offset to Address: P-CLEAR
defb P_RETURN - $ ; 15 offset to Address: P-RETURN
defb P_COPY - $ ; 5D offset to Address: P-COPY
; -------------------------------
; The parameter or "Syntax" table
; -------------------------------
; For each command there exists a variable list of parameters.
; If the character is greater than a space it is a required separator.
; If less, then it is a command class in the range 00 - 0B.
; Note that classes 00, 03 and 05 will fetch the addresses from this table.
; Some classes e.g. 07 and 0B have the same address in all invocations
; and the command is re-computed from the low-byte of the parameter address.
; Some e.g. 02 are only called once so a call to the command is made from
; within the class routine rather than holding the address within the table.
; Some class routines check syntax entirely and some leave this task for the
; command itself.
; Others for example CIRCLE (x,y,z) check the first part (x,y) using the
; class routine and the final part (,z) within the command.
; The last few commands appear to have been added in a rush but their syntax
; is rather simple e.g. MOVE "M1","M2"
;; P-LET
P_LET:
defb 0x01 ; Class-01 - A variable is required.
defb 0x3D ; Separator: '='
defb 0x02 ; Class-02 - An expression, numeric or string,
; must follow.
;; P-GO-TO
P_GO_TO:
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw GO_TO ; Address: $1E67; Address: GO-TO
;; P-IF
P_IF:
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0xCB ; Separator: 'THEN'
defb 0x05 ; Class-05 - Variable syntax checked
; by routine.
defw IF ; Address: $1CF0; Address: IF
;; P-GO-SUB
P_GO_SUB:
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw GO_SUB ; Address: $1EED; Address: GO-SUB
;; P-STOP
P_STOP:
defb 0x00 ; Class-00 - No further operands.
defw STOP_BAS ; Address: $1CEE; Address: STOP
;; P-RETURN
P_RETURN:
defb 0x00 ; Class-00 - No further operands.
defw RETURN ; Address: $1F23; Address: RETURN
;; P-FOR
P_FOR:
defb 0x04 ; Class-04 - A single character variable must
; follow.
defb 0x3D ; Separator: '='
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0xCC ; Separator: 'TO'
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0x05 ; Class-05 - Variable syntax checked
; by routine.
defw FOR ; Address: $1D03; Address: FOR
;; P-NEXT
P_NEXT:
defb 0x04 ; Class-04 - A single character variable must
; follow.
defb 0x00 ; Class-00 - No further operands.
defw NEXT ; Address: $1DAB; Address: NEXT
;; P-PRINT
P_PRINT:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw PRINT ; Address: $1FCD; Address: PRINT
;; P-INPUT
P_INPUT:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw INPUT ; Address: $2089; Address: INPUT
;; P-DIM
P_DIM:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw DIM ; Address: $2C02; Address: DIM
;; P-REM
P_REM:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw REM ; Address: $1BB2; Address: REM
;; P-NEW
P_NEW:
defb 0x00 ; Class-00 - No further operands.
defw NEW ; Address: $11B7; Address: NEW
;; P-RUN
P_RUN:
defb 0x03 ; Class-03 - A numeric expression may follow
; else default to zero.
defw RUN ; Address: $1EA1; Address: RUN
;; P-LIST
P_LIST:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw LIST ; Address: $17F9; Address: LIST
;; P-POKE
P_POKE:
defb 0x08 ; Class-08 - Two comma-separated numeric
; expressions required.
defb 0x00 ; Class-00 - No further operands.
defw POKE ; Address: $1E80; Address: POKE
;; P-RANDOM
P_RANDOM:
defb 0x03 ; Class-03 - A numeric expression may follow
; else default to zero.
defw RANDOMIZE ; Address: $1E4F; Address: RANDOMIZE
;; P-CONT
P_CONT:
defb 0x00 ; Class-00 - No further operands.
defw CONTINUE ; Address: $1E5F; Address: CONTINUE
;; P-CLEAR
P_CLEAR:
defb 0x03 ; Class-03 - A numeric expression may follow
; else default to zero.
defw CLEAR ; Address: $1EAC; Address: CLEAR
;; P-CLS
P_CLS:
defb 0x00 ; Class-00 - No further operands.
defw CLS ; Address: $0D6B; Address: CLS
;; P-PLOT
P_PLOT:
defb 0x09 ; Class-09 - Two comma-separated numeric
; expressions required with optional colour
; items.
defb 0x00 ; Class-00 - No further operands.
defw PLOT ; Address: $22DC; Address: PLOT
;; P-PAUSE
P_PAUSE:
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw PAUSE ; Address: $1F3A; Address: PAUSE
;; P-READ
P_READ:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw READ ; Address: $1DED; Address: READ
;; P-DATA
P_DATA:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw DATA ; Address: $1E27; Address: DATA
;; P-RESTORE
P_RESTORE:
defb 0x03 ; Class-03 - A numeric expression may follow
; else default to zero.
defw RESTORE ; Address: $1E42; Address: RESTORE
;; P-DRAW
P_DRAW:
defb 0x09 ; Class-09 - Two comma-separated numeric
; expressions required with optional colour
; items.
defb 0x05 ; Class-05 - Variable syntax checked
; by routine.
defw DRAW ; Address: $2382; Address: DRAW
;; P-COPY
P_COPY:
defb 0x00 ; Class-00 - No further operands.
defw COPY ; Address: $0EAC; Address: COPY
;; P-LPRINT
P_LPRINT:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw LPRINT ; Address: $1FC9; Address: LPRINT
;; P-LLIST
P_LLIST:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw LLIST ; Address: $17F5; Address: LLIST
;; P-SAVE
P_SAVE:
defb 0x0B ; Class-0B - Offset address converted to tape
; command.
;; P-LOAD
P_LOAD:
defb 0x0B ; Class-0B - Offset address converted to tape
; command.
;; P-VERIFY
P_VERIFY:
defb 0x0B ; Class-0B - Offset address converted to tape
; command.
;; P-MERGE
P_MERGE:
defb 0x0B ; Class-0B - Offset address converted to tape
; command.
;; P-BEEP
P_BEEP:
defb 0x08 ; Class-08 - Two comma-separated numeric
; expressions required.
defb 0x00 ; Class-00 - No further operands.
defw beep ; Address: $03F8; Address: BEEP
;; P-CIRCLE
P_CIRCLE:
defb 0x09 ; Class-09 - Two comma-separated numeric
; expressions required with optional colour
; items.
defb 0x05 ; Class-05 - Variable syntax checked
; by routine.
defw CIRCLE ; Address: $2320; Address: CIRCLE
;; P-INK
P_INK:
defb 0x07 ; Class-07 - Offset address is converted to
; colour code.
;; P-PAPER
P_PAPER:
defb 0x07 ; Class-07 - Offset address is converted to
; colour code.
;; P-FLASH
P_FLASH:
defb 0x07 ; Class-07 - Offset address is converted to
; colour code.
;; P-BRIGHT
P_BRIGHT:
defb 0x07 ; Class-07 - Offset address is converted to
; colour code.
;; P-INVERSE
P_INVERSE:
defb 0x07 ; Class-07 - Offset address is converted to
; colour code.
;; P-OVER
P_OVER:
defb 0x07 ; Class-07 - Offset address is converted to
; colour code.
;; P-OUT
P_OUT:
defb 0x08 ; Class-08 - Two comma-separated numeric
; expressions required.
defb 0x00 ; Class-00 - No further operands.
defw OUT_BAS ; Address: $1E7A; Address: OUT
;; P-BORDER
P_BORDER:
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw BORDER ; Address: $2294; Address: BORDER
;; P-DEF-FN
P_DEF_FN:
defb 0x05 ; Class-05 - Variable syntax checked entirely
; by routine.
defw DEF_FN ; Address: $1F60; Address: DEF-FN
;; P-OPEN
P_OPEN:
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0x2C ; Separator: ',' see Footnote *
defb 0x0A ; Class-0A - A string expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw OPEN ; Address: $1736; Address: OPEN
;; P-CLOSE
P_CLOSE:
defb 0x06 ; Class-06 - A numeric expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw CLOSE ; Address: $16E5; Address: CLOSE
;; P-FORMAT
P_FORMAT:
defb 0x0A ; Class-0A - A string expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw CAT_ETC ; Address: $1793; Address: CAT-ETC
;; P-MOVE
P_MOVE:
defb 0x0A ; Class-0A - A string expression must follow.
defb 0x2C ; Separator: ','
defb 0x0A ; Class-0A - A string expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw CAT_ETC ; Address: $1793; Address: CAT-ETC
;; P-ERASE
P_ERASE:
defb 0x0A ; Class-0A - A string expression must follow.
defb 0x00 ; Class-00 - No further operands.
defw CAT_ETC ; Address: $1793; Address: CAT-ETC
;; P-CAT
P_CAT:
defb 0x00 ; Class-00 - No further operands.
defw CAT_ETC ; Address: $1793; Address: CAT-ETC
; * Note that a comma is required as a separator with the OPEN command
; but the Interface 1 programmers relaxed this allowing ';' as an
; alternative for their channels creating a confusing mixture of
; allowable syntax as it is this ROM which opens or re-opens the
; normal channels.
; -------------------------------
; Main parser (BASIC interpreter)
; -------------------------------
; This routine is called once from MAIN-2 when the BASIC line is to
; be entered or re-entered into the Program area and the syntax
; requires checking.
;; LINE-SCAN
LINE_SCAN:
res 7,(iy+FLAGS-IY0) ; update FLAGS - signal checking syntax
call E_LINE_NO ; routine E-LINE-NO >>
; fetches the line number if in range.
xor a ; clear the accumulator.
ld (SUBPPC),a ; set statement number SUBPPC to zero.
dec a ; set accumulator to $FF.
ld (ERR_NR),a ; set ERR_NR to 'OK' - 1.
jr STMT_L_1 ; forward to continue at STMT-L-1.
; --------------
; Statement loop
; --------------
;
;
;; STMT-LOOP
STMT_LOOP:
rst 0x20 ; NEXT-CHAR
; -> the entry point from above or LINE-RUN
;; STMT-L-1
STMT_L_1:
call SET_WORK ; routine SET-WORK clears workspace etc.
inc (iy+SUBPPC-IY0) ; increment statement number SUBPPC
jp m,REPORT_C ; to REPORT-C to raise
; 'Nonsense in BASIC' if over 127.
rst 0x18 ; GET-CHAR
ld b,0x00 ; set B to zero for later indexing.
; early so any other reason ???
cp 0x0D ; is character carriage return ?
; i.e. an empty statement.
jr z,LINE_END ; forward to LINE-END if so.
cp 0x3A ; is it statement end marker ':' ?
; i.e. another type of empty statement.
jr z,STMT_LOOP ; back to STMT-LOOP if so.
ld hl,STMT_RET ; address: STMT-RET
push hl ; is now pushed as a return address
ld c,a ; transfer the current character to C.
; advance CH_ADD to a position after command and test if it is a command.
rst 0x20 ; NEXT-CHAR to advance pointer
ld a,c ; restore current character
sub 0xCE ; subtract 'DEF FN' - first command
jp c,REPORT_C ; jump to REPORT-C if less than a command
; raising
; 'Nonsense in BASIC'
ld c,a ; put the valid command code back in C.
; register B is zero.
ld hl,offst_tbl ; address: offst-tbl
add hl,bc ; index into table with one of 50 commands.
ld c,(hl) ; pick up displacement to syntax table entry.
add hl,bc ; add to address the relevant entry.
jr GET_PARAM ; forward to continue at GET-PARAM
; ----------------------
; The main scanning loop
; ----------------------
; not documented properly
;
;; SCAN-LOOP
SCAN_LOOP:
ld hl,(T_ADDR) ; fetch temporary address from T_ADDR
; during subsequent loops.
; -> the initial entry point with HL addressing start of syntax table entry.
;; GET-PARAM
GET_PARAM:
ldi a,(hl) ; pick up the parameter.
; address next one.
ld (T_ADDR),hl ; save pointer in system variable T_ADDR
ld bc,SCAN_LOOP ; address: SCAN-LOOP
push bc ; is now pushed on stack as looping address.
ld c,a ; store parameter in C.
cp 0x20 ; is it greater than ' ' ?
jr nc,SEPARATOR ; forward to SEPARATOR to check that correct
; separator appears in statement if so.
ld hl,class_tbl ; address: class-tbl.
ld b,0x00 ; prepare to index into the class table.
add hl,bc ; index to find displacement to routine.
ld c,(hl) ; displacement to BC
add hl,bc ; add to address the CLASS routine.
push hl ; push the address on the stack.
rst 0x18 ; GET-CHAR - HL points to place in statement.
dec b ; reset the zero flag - the initial state
; for all class routines.
ret ; and make an indirect jump to routine
; and then SCAN-LOOP (also on stack).
; Note. one of the class routines will eventually drop the return address
; off the stack breaking out of the above seemingly endless loop.
; -----------------------
; THE 'SEPARATOR' ROUTINE
; -----------------------
; This routine is called once to verify that the mandatory separator
; present in the parameter table is also present in the correct
; location following the command. For example, the 'THEN' token after
; the 'IF' token and expression.
;; SEPARATOR
SEPARATOR:
rst 0x18 ; GET-CHAR
cp c ; does it match the character in C ?
jp nz,REPORT_C ; jump forward to REPORT-C if not
; 'Nonsense in BASIC'.
rst 0x20 ; NEXT-CHAR advance to next character
ret ; return.
; ------------------------------
; Come here after interpretation
; ------------------------------
;
;
;; STMT-RET
STMT_RET:
call BREAK_KEY ; routine BREAK-KEY is tested after every
; statement.
jr c,STMT_R_1 ; step forward to STMT-R-1 if not pressed.
;; REPORT-L
REPORT_L:
rst 0x08 ; ERROR-1
defb 0x14 ; Error Report: BREAK into program
;; STMT-R-1
STMT_R_1:
bit 7,(iy+NSPPC-IY0) ; test NSPPC - will be set if $FF -
; no jump to be made.
jr nz,STMT_NEXT ; forward to STMT-NEXT if a program line.
ld hl,(NEWPPC) ; fetch line number from NEWPPC
bit 7,h ; will be set if minus two - direct command(s)
jr z,LINE_NEW ; forward to LINE-NEW if a jump is to be
; made to a new program line/statement.
; --------------------
; Run a direct command
; --------------------
; A direct command is to be run or, if continuing from above,
; the next statement of a direct command is to be considered.
;; LINE-RUN
LINE_RUN:
ld hl,0xFFFE ; The dummy value minus two
ld (PPC),hl ; is set/reset as line number in PPC.
ld hl,(WORKSP) ; point to end of line + 1 - WORKSP.
dec hl ; now point to $80 end-marker.
ld de,(E_LINE) ; address the start of line E_LINE.
dec de ; now location before - for GET-CHAR.
ld a,(NSPPC) ; load statement to A from NSPPC.
jr NEXT_LINE ; forward to NEXT-LINE.
; ------------------------------
; Find start address of new line
; ------------------------------
; The branch was to here if a jump is to made to a new line number
; and statement.
; That is the previous statement was a GO TO, GO SUB, RUN, RETURN, NEXT etc..
;; LINE-NEW
LINE_NEW:
call LINE_ADDR ; routine LINE-ADDR gets address of line
; returning zero flag set if line found.
ld a,(NSPPC) ; fetch new statement from NSPPC
jr z,LINE_USE ; forward to LINE-USE if line matched.
; continue as must be a direct command.
and a ; test statement which should be zero
jr nz,REPORT_N ; forward to REPORT-N if not.
; 'Statement lost'
;
ld b,a ; save statement in B.??
ld a,(hl) ; fetch high byte of line number.
and 0xC0 ; test if using direct command
; a program line is less than $3F
ld a,b ; retrieve statement.
; (we can assume it is zero).
jr z,LINE_USE ; forward to LINE-USE if was a program line
; Alternatively a direct statement has finished correctly.
;; REPORT-0
REPORT_0:
rst 0x08 ; ERROR-1
defb 0xFF ; Error Report: OK
; -----------------
; THE 'REM' COMMAND
; -----------------
; The REM command routine.
; The return address STMT-RET is dropped and the rest of line ignored.
;; REM
REM:
pop bc ; drop return address STMT-RET and
; continue ignoring rest of line.
; ------------
; End of line?
; ------------
;
;
;; LINE-END
LINE_END:
call SYNTAX_Z ; routine SYNTAX-Z (UNSTACK-Z?)
ret z ; return if checking syntax.
ld hl,(NXTLIN) ; fetch NXTLIN to HL.
ld a,0xC0 ; test against the
and (hl) ; system limit $3F.
ret nz ; return if more as must be
; end of program.
; (or direct command)
xor a ; set statement to zero.
; and continue to set up the next following line and then consider this new one.
; ---------------------
; General line checking
; ---------------------
; The branch was here from LINE-NEW if BASIC is branching.
; or a continuation from above if dealing with a new sequential line.
; First make statement zero number one leaving others unaffected.
;; LINE-USE
LINE_USE:
cp 0x01 ; will set carry if zero.
adc a,0x00 ; add in any carry.
ldi d,(hl) ; high byte of line number to D.
; advance pointer.
ld e,(hl) ; low byte of line number to E.
ld (PPC),de ; set system variable PPC.
inc hl ; advance pointer.
ldi e,(hl) ; low byte of line length to E.
; advance pointer.
ld d,(hl) ; high byte of line length to D.
ex de,hl ; swap pointer to DE before
add hl,de ; adding to address the end of line.
inc hl ; advance to start of next line.
; -----------------------------
; Update NEXT LINE but consider
; previous line or edit line.
; -----------------------------
; The pointer will be the next line if continuing from above or to
; edit line end-marker ($80) if from LINE-RUN.
;; NEXT-LINE
NEXT_LINE:
ld (NXTLIN),hl ; store pointer in system variable NXTLIN
ex de,hl ; bring back pointer to previous or edit line
ld (CH_ADD),hl ; and update CH_ADD with character address.
ld d,a ; store statement in D.
ld e,0x00 ; set E to zero to suppress token searching
; if EACH-STMT is to be called.
ld (iy+NSPPC-IY0),0xFF ; set statement NSPPC to $FF signalling
; no jump to be made.
dec d ; decrement and test statement
ld (iy+SUBPPC-IY0),d ; set SUBPPC to decremented statement number.
jp z,STMT_LOOP ; to STMT-LOOP if result zero as statement is
; at start of line and address is known.
inc d ; else restore statement.
call EACH_STMT ; routine EACH-STMT finds the D'th statement
; address as E does not contain a token.
jr z,STMT_NEXT ; forward to STMT-NEXT if address found.
;; REPORT-N
REPORT_N:
rst 0x08 ; ERROR-1
defb 0x16 ; Error Report: Statement lost
; -----------------
; End of statement?
; -----------------
; This combination of routines is called from 20 places when
; the end of a statement should have been reached and all preceding
; syntax is in order.
;; CHECK-END
CHECK_END:
call SYNTAX_Z ; routine SYNTAX-Z
ret nz ; return immediately in runtime
pop bc ; drop address of calling routine.
pop bc ; drop address STMT-RET.
; and continue to find next statement.
; --------------------
; Go to next statement
; --------------------
; Acceptable characters at this point are carriage return and ':'.
; If so go to next statement which in the first case will be on next line.
;; STMT-NEXT
STMT_NEXT:
rst 0x18 ; GET-CHAR - ignoring white space etc.
cp 0x0D ; is it carriage return ?
jr z,LINE_END ; back to LINE-END if so.
cp 0x3A ; is it ':' ?
jp z,STMT_LOOP ; jump back to STMT-LOOP to consider
; further statements
jp REPORT_C ; jump to REPORT-C with any other character
; 'Nonsense in BASIC'.
; Note. the two-byte sequence 'rst 08; defb $0b' could replace the above jp.
; -------------------
; Command class table
; -------------------
;
;; class-tbl
class_tbl:
defb CLASS_00 - $ ; 0F offset to Address: CLASS-00
defb CLASS_01 - $ ; 1D offset to Address: CLASS-01
defb CLASS_02 - $ ; 4B offset to Address: CLASS-02
defb CLASS_03 - $ ; 09 offset to Address: CLASS-03
defb CLASS_04 - $ ; 67 offset to Address: CLASS-04
defb CLASS_05 - $ ; 0B offset to Address: CLASS-05
defb EXPT_1NUM - $ ; 7B offset to Address: CLASS-06
defb CLASS_07 - $ ; 8E offset to Address: CLASS-07
defb EXPT_2NUM - $ ; 71 offset to Address: CLASS-08
defb CLASS_09 - $ ; B4 offset to Address: CLASS-09
defb EXPT_EXP - $ ; 81 offset to Address: CLASS-0A
defb CLASS_0B - $ ; CF offset to Address: CLASS-0B
; --------------------------------
; Command classes---00, 03, and 05
; --------------------------------
; class-03 e.g. RUN or RUN 200 ; optional operand
; class-00 e.g. CONTINUE ; no operand
; class-05 e.g. PRINT ; variable syntax checked by routine
;; CLASS-03
CLASS_03:
call FETCH_NUM ; routine FETCH-NUM
;; CLASS-00
CLASS_00:
cp a ; reset zero flag.
; if entering here then all class routines are entered with zero reset.
;; CLASS-05
CLASS_05:
pop bc ; drop address SCAN-LOOP.
call z,CHECK_END ; if zero set then call routine CHECK-END >>>
; as should be no further characters.
ex de,hl ; save HL to DE.
ld hl,(T_ADDR) ; fetch T_ADDR
ldi c,(hl) ; fetch low byte of routine
; address next.
ld b,(hl) ; fetch high byte of routine.
ex de,hl ; restore HL from DE
push bc ; push the address
ret ; and make an indirect jump to the command.
; --------------------------------
; Command classes---01, 02, and 04
; --------------------------------
; class-01 e.g. LET A = 2*3 ; a variable is reqd
; This class routine is also called from INPUT and READ to find the
; destination variable for an assignment.
;; CLASS-01
CLASS_01:
call LOOK_VARS ; routine LOOK-VARS returns carry set if not
; found in runtime.
; ----------------------
; Variable in assignment
; ----------------------
;
;
;; VAR-A-1
VAR_A_1:
ld (iy+FLAGX-IY0),0x00 ; set FLAGX to zero
jr nc,VAR_A_2 ; forward to VAR-A-2 if found or checking
; syntax.
set 1,(iy+FLAGX-IY0) ; FLAGX - Signal a new variable
jr nz,VAR_A_3 ; to VAR-A-3 if not assigning to an array
; e.g. LET a$(3,3) = "X"
;; REPORT-2
REPORT_2:
rst 0x08 ; ERROR-1
defb 0x01 ; Error Report: Variable not found
;; VAR-A-2
VAR_A_2:
call z,STK_VAR ; routine STK-VAR considers a subscript/slice
bit 6,(iy+FLAGS-IY0) ; test FLAGS - Numeric or string result ?
jr nz,VAR_A_3 ; to VAR-A-3 if numeric
xor a ; default to array/slice - to be retained.
call SYNTAX_Z ; routine SYNTAX-Z
call nz,STK_FETCH ; routine STK-FETCH is called in runtime
; may overwrite A with 1.
ld hl,FLAGX ; address system variable FLAGX
or (hl) ; set bit 0 if simple variable to be reclaimed
ld (hl),a ; update FLAGX
ex de,hl ; start of string/subscript to DE
;; VAR-A-3
VAR_A_3:
ld (STRLEN),bc ; update STRLEN
ld (DEST),hl ; and DEST of assigned string.
ret ; return.
; -------------------------------------------------
; class-02 e.g. LET a = 1 + 1 ; an expression must follow
;; CLASS-02
CLASS_02:
pop bc ; drop return address SCAN-LOOP
call VAL_FET_1 ; routine VAL-FET-1 is called to check
; expression and assign result in runtime
call CHECK_END ; routine CHECK-END checks nothing else
; is present in statement.
ret ; Return
; -------------
; Fetch a value
; -------------
;
;
;; VAL-FET-1
VAL_FET_1:
ld a,(FLAGS) ; initial FLAGS to A
;; VAL-FET-2
VAL_FET_2:
push af ; save A briefly
call SCANNING ; routine SCANNING evaluates expression.
pop af ; restore A
ld d,(iy+FLAGS-IY0) ; post-SCANNING FLAGS to D
xor d ; xor the two sets of flags
and 0x40 ; pick up bit 6 of xored FLAGS should be zero
jr nz,REPORT_C ; forward to REPORT-C if not zero
; 'Nonsense in BASIC' - results don't agree.
bit 7,d ; test FLAGS - is syntax being checked ?
jp nz,LET ; jump forward to LET to make the assignment
; in runtime.
ret ; but return from here if checking syntax.
; ------------------
; Command class---04
; ------------------
; class-04 e.g. FOR i ; a single character variable must follow
;; CLASS-04
CLASS_04:
call LOOK_VARS ; routine LOOK-VARS
push af ; preserve flags.
ld a,c ; fetch type - should be 011xxxxx
or 0x9F ; combine with 10011111.
inc a ; test if now $FF by incrementing.
jr nz,REPORT_C ; forward to REPORT-C if result not zero.
pop af ; else restore flags.
jr VAR_A_1 ; back to VAR-A-1
; --------------------------------
; Expect numeric/string expression
; --------------------------------
; This routine is used to get the two coordinates of STRING$, ATTR and POINT.
; It is also called from PRINT-ITEM to get the two numeric expressions that
; follow the AT ( in PRINT AT, INPUT AT).
;; NEXT-2NUM
NEXT_2NUM:
rst 0x20 ; NEXT-CHAR advance past 'AT' or '('.
; --------
; class-08 e.g. POKE 65535,2 ; two numeric expressions separated by comma
;; CLASS-08
;; EXPT-2NUM
EXPT_2NUM:
call EXPT_1NUM ; routine EXPT-1NUM is called for first
; numeric expression
cp 0x2C ; is character ',' ?
jr nz,REPORT_C ; to REPORT-C if not required separator.
; 'Nonsense in BASIC'.
rst 0x20 ; NEXT-CHAR
; ->
; class-06 e.g. GOTO a*1000 ; a numeric expression must follow
;; CLASS-06
;; EXPT-1NUM
EXPT_1NUM:
call SCANNING ; routine SCANNING
bit 6,(iy+FLAGS-IY0) ; test FLAGS - Numeric or string result ?
ret nz ; return if result is numeric.
;; REPORT-C
REPORT_C:
rst 0x08 ; ERROR-1
defb 0x0B ; Error Report: Nonsense in BASIC
; ---------------------------------------------------------------
; class-0A e.g. ERASE "????" ; a string expression must follow.
; ; these only occur in unimplemented commands
; ; although the routine expt-exp is called
; ; from SAVE-ETC
;; CLASS-0A
;; EXPT-EXP
EXPT_EXP:
call SCANNING ; routine SCANNING
bit 6,(iy+FLAGS-IY0) ; test FLAGS - Numeric or string result ?
ret z ; return if string result.
jr REPORT_C ; back to REPORT-C if numeric.
; ---------------------
; Set permanent colours
; class 07
; ---------------------
; class-07 e.g. PAPER 6 ; a single class for a collection of
; ; similar commands. Clever.
;
; Note. these commands should ensure that current channel is 'S'
;; CLASS-07
CLASS_07:
bit 7,(iy+FLAGS-IY0) ; test FLAGS - checking syntax only ?
; Note. there is a subroutine to do this.
res 0,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal main screen in use
call nz,TEMPS ; routine TEMPS is called in runtime.
pop af ; drop return address SCAN-LOOP
ld a,(T_ADDR) ; T_ADDR_lo to accumulator.
; points to '$07' entry + 1
; e.g. for INK points to $EC now
; Note if you move alter the syntax table next line may have to be altered.
; Note. For ZASM assembler replace following expression with SUB $13.
L1CA5:
sub +(P_INK - 0xD8) % 256
; convert $EB to $D8 ('INK') etc.
; ( is SUB $13 in standard ROM )
call CO_TEMP_4 ; routine CO-TEMP-4
call CHECK_END ; routine CHECK-END check that nothing else
; in statement.
; return here in runtime.
ld hl,(ATTR_T) ; pick up ATTR_T and MASK_T
ld (ATTR_P),hl ; and store in ATTR_P and MASK_P
ld hl,P_FLAG ; point to P_FLAG.
ld a,(hl) ; pick up in A
rlca ; rotate to left
xor (hl) ; combine with HL
and 0xAA ; 10101010
xor (hl) ; only permanent bits affected
ld (hl),a ; reload into P_FLAG.
ret ; return.
; ------------------
; Command class---09
; ------------------
; e.g. PLOT PAPER 0; 128,88 ; two coordinates preceded by optional
; ; embedded colour items.
;
; Note. this command should ensure that current channel is actually 'S'.
;; CLASS-09
CLASS_09:
call SYNTAX_Z ; routine SYNTAX-Z
jr z,CL_09_1 ; forward to CL-09-1 if checking syntax.
res 0,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal main screen in use
call TEMPS ; routine TEMPS is called.
ld hl,MASK_T ; point to MASK_T
ld a,(hl) ; fetch mask to accumulator.
or 0xF8 ; or with 11111000 paper/bright/flash 8
ld (hl),a ; mask back to MASK_T system variable.
res 6,(iy+P_FLAG-IY0) ; reset P_FLAG - signal NOT PAPER 9 ?
rst 0x18 ; GET-CHAR
;; CL-09-1
CL_09_1:
call CO_TEMP_2 ; routine CO-TEMP-2 deals with any embedded
; colour items.
jr EXPT_2NUM ; exit via EXPT-2NUM to check for x,y.
; Note. if either of the numeric expressions contain STR$ then the flag setting
; above will be undone when the channel flags are reset during STR$.
; e.g.
; 10 BORDER 3 : PLOT VAL STR$ 128, VAL STR$ 100
; credit John Elliott.
; ------------------
; Command class---0B
; ------------------
; Again a single class for four commands.
; This command just jumps back to SAVE-ETC to handle the four tape commands.
; The routine itself works out which command has called it by examining the
; address in T_ADDR_lo. Note therefore that the syntax table has to be
; located where these and other sequential command addresses are not split
; over a page boundary.
;; CLASS-0B
CLASS_0B:
jp SAVE_ETC ; jump way back to SAVE-ETC
; --------------
; Fetch a number
; --------------
; This routine is called from CLASS-03 when a command may be followed by
; an optional numeric expression e.g. RUN. If the end of statement has
; been reached then zero is used as the default.
; Also called from LIST-4.
;; FETCH-NUM
FETCH_NUM:
cp 0x0D ; is character a carriage return ?
jr z,USE_ZERO ; forward to USE-ZERO if so
cp 0x3A ; is it ':' ?
jr nz,EXPT_1NUM ; forward to EXPT-1NUM if not.
; else continue and use zero.
; ----------------
; Use zero routine
; ----------------
; This routine is called four times to place the value zero on the
; calculator stack as a default value in runtime.
;; USE-ZERO
USE_ZERO:
call SYNTAX_Z ; routine SYNTAX-Z (UNSTACK-Z?)
ret z
rst 0x28 ; ; FP-CALC
defb 0xA0 ; ;stk-zero ;0.
defb 0x38 ; ;end-calc
ret ; return.
; -------------------
; Handle STOP command
; -------------------
; Command Syntax: STOP
; One of the shortest and least used commands. As with 'OK' not an error.
;; REPORT-9
;; STOP
STOP_BAS:
rst 0x08 ; ERROR-1
defb 0x08 ; Error Report: STOP statement
; -----------------
; Handle IF command
; -----------------
; e.g. IF score>100 THEN PRINT "You Win"
; The parser has already checked the expression the result of which is on
; the calculator stack. The presence of the 'THEN' separator has also been
; checked and CH-ADD points to the command after THEN.
;
;; IF
IF:
pop bc ; drop return address - STMT-RET
call SYNTAX_Z ; routine SYNTAX-Z
jr z,IF_1 ; forward to IF-1 if checking syntax
; to check syntax of PRINT "You Win"
rst 0x28 ; ; FP-CALC score>100 (1=TRUE 0=FALSE)
defb 0x02 ; ;delete .
defb 0x38 ; ;end-calc
ex de,hl ; make HL point to deleted value
call TEST_ZERO ; routine TEST-ZERO
jp c,LINE_END ; jump to LINE-END if FALSE (0)
;; IF-1
IF_1:
jp STMT_L_1 ; to STMT-L-1, if true (1) to execute command
; after 'THEN' token.
; ------------------
; Handle FOR command
; ------------------
; e.g. FOR i = 0 TO 1 STEP 0.1
; Using the syntax tables, the parser has already checked for a start and
; limit value and also for the intervening separator.
; the two values v,l are on the calculator stack.
; CLASS-04 has also checked the variable and the name is in STRLEN_lo.
; The routine begins by checking for an optional STEP.
;; FOR
FOR:
cp 0xCD ; is there a 'STEP' ?
jr nz,F_USE_1 ; to F-USE-1 if not to use 1 as default.
rst 0x20 ; NEXT-CHAR
call EXPT_1NUM ; routine EXPT-1NUM
call CHECK_END ; routine CHECK-END
jr F_REORDER ; to F-REORDER
; ---
;; F-USE-1
F_USE_1:
call CHECK_END ; routine CHECK-END
rst 0x28 ; ; FP-CALC v,l.
defb 0xA1 ; ;stk-one v,l,1=s.
defb 0x38 ; ;end-calc
;; F-REORDER
F_REORDER:
rst 0x28 ; ; FP-CALC v,l,s.
defb 0xC0 ; ;st-mem-0 v,l,s.
defb 0x02 ; ;delete v,l.
defb 0x01 ; ;exchange l,v.
defb 0xE0 ; ;get-mem-0 l,v,s.
defb 0x01 ; ;exchange l,s,v.
defb 0x38 ; ;end-calc
call LET ; routine LET assigns the initial value v to
; the variable altering type if necessary.
ld (MEM),hl ; The system variable MEM is made to point to
; the variable instead of its normal
; location MEMBOT
dec hl ; point to single-character name
ld a,(hl) ; fetch name
set 7,(hl) ; set bit 7 at location
ld bc,0x0006 ; add six to HL
add hl,bc ; to address where limit should be.
rlca ; test bit 7 of original name.
jr c,F_L_S ; forward to F-L-S if already a FOR/NEXT
; variable
ld c,0x0D ; otherwise an additional 13 bytes are needed.
; 5 for each value, two for line number and
; 1 byte for looping statement.
call MAKE_ROOM ; routine MAKE-ROOM creates them.
inc hl ; make HL address limit.
;; F-L-S
F_L_S:
push hl ; save position.
rst 0x28 ; ; FP-CALC l,s.
defb 0x02 ; ;delete l.
defb 0x02 ; ;delete .
defb 0x38 ; ;end-calc
; DE points to STKEND, l.
pop hl ; restore variable position
ex de,hl ; swap pointers
ld c,0x0A ; ten bytes to move
ldir ; Copy 'deleted' values to variable.
ld hl,(PPC) ; Load with current line number from PPC
ex de,hl ; exchange pointers.
ldi (hl),e ; save the looping line
; in the next
ld (hl),d ; two locations.
ld d,(iy+SUBPPC-IY0) ; fetch statement from SUBPPC system variable.
inc d ; increment statement.
inc hl ; and pointer
ld (hl),d ; and store the looping statement.
call NEXT_LOOP ; routine NEXT-LOOP considers an initial
ret nc ; iteration. Return to STMT-RET if a loop is
; possible to execute next statement.
; no loop is possible so execution continues after the matching 'NEXT'
ld b,(iy+STRLEN-IY0) ; get single-character name from STRLEN_lo
ld hl,(PPC) ; get the current line from PPC
ld (NEWPPC),hl ; and store it in NEWPPC
ld a,(SUBPPC) ; fetch current statement from SUBPPC
neg ; Negate as counter decrements from zero
; initially and we are in the middle of a
; line.
ld d,a ; Store result in D.
ld hl,(CH_ADD) ; get current address from CH_ADD
ld e,0xF3 ; search will be for token 'NEXT'
;; F-LOOP
F_LOOP:
push bc ; save variable name.
ld bc,(NXTLIN) ; fetch NXTLIN
call LOOK_PROG ; routine LOOK-PROG searches for 'NEXT' token.
ld (NXTLIN),bc ; update NXTLIN
pop bc ; and fetch the letter
jr c,REPORT_I ; forward to REPORT-I if the end of program
; was reached by LOOK-PROG.
; 'FOR without NEXT'
rst 0x20 ; NEXT-CHAR fetches character after NEXT
or 0x20 ; ensure it is upper-case.
cp b ; compare with FOR variable name
jr z,F_FOUND ; forward to F-FOUND if it matches.
; but if no match i.e. nested FOR/NEXT loops then continue search.
rst 0x20 ; NEXT-CHAR
jr F_LOOP ; back to F-LOOP
; ---
;; F-FOUND
F_FOUND:
rst 0x20 ; NEXT-CHAR
ld a,0x01 ; subtract the negated counter from 1
sub d ; to give the statement after the NEXT
ld (NSPPC),a ; set system variable NSPPC
ret ; return to STMT-RET to branch to new
; line and statement. ->
; ---
;; REPORT-I
REPORT_I:
rst 0x08 ; ERROR-1
defb 0x11 ; Error Report: FOR without NEXT
; ---------
; LOOK-PROG
; ---------
; Find DATA, DEF FN or NEXT.
; This routine searches the program area for one of the above three keywords.
; On entry, HL points to start of search area.
; The token is in E, and D holds a statement count, decremented from zero.
;; LOOK-PROG
LOOK_PROG:
ld a,(hl) ; fetch current character
cp 0x3A ; is it ':' a statement separator ?
jr z,LOOK_P_2 ; forward to LOOK-P-2 if so.
; The starting point was PROG - 1 or the end of a line.
;; LOOK-P-1
LOOK_P_1:
inc hl ; increment pointer to address
ld a,(hl) ; the high byte of line number
and 0xC0 ; test for program end marker $80 or a
; variable
scf ; Set Carry Flag
ret nz ; return with carry set if at end
; of program. ->
ldi b,(hl) ; high byte of line number to B
ld c,(hl) ; low byte to C.
ld (NEWPPC),bc ; set system variable NEWPPC.
inc hl
ldi c,(hl) ; low byte of line length to C.
ld b,(hl) ; high byte to B.
push hl ; save address
add hl,bc ; add length to position.
ld bc,hl ; and save result
; in BC.
pop hl ; restore address.
ld d,0x00 ; initialize statement counter to zero.
;; LOOK-P-2
LOOK_P_2:
push bc ; save address of next line
call EACH_STMT ; routine EACH-STMT searches current line.
pop bc ; restore address.
ret nc ; return if match was found. ->
jr LOOK_P_1 ; back to LOOK-P-1 for next line.
; -------------------
; Handle NEXT command
; -------------------
; e.g. NEXT i
; The parameter tables have already evaluated the presence of a variable
;; NEXT
NEXT:
bit 1,(iy+FLAGX-IY0) ; test FLAGX - handling a new variable ?
jp nz,REPORT_2 ; jump back to REPORT-2 if so
; 'Variable not found'
; now test if found variable is a simple variable uninitialized by a FOR.
ld hl,(DEST) ; load address of variable from DEST
bit 7,(hl) ; is it correct type ?
jr z,REPORT_1 ; forward to REPORT-1 if not
; 'NEXT without FOR'
inc hl ; step past variable name
ld (MEM),hl ; and set MEM to point to three 5-byte values
; value, limit, step.
rst 0x28 ; ; FP-CALC add step and re-store
defb 0xE0 ; ;get-mem-0 v.
defb 0xE2 ; ;get-mem-2 v,s.
defb 0x0F ; ;addition v+s.
defb 0xC0 ; ;st-mem-0 v+s.
defb 0x02 ; ;delete .
defb 0x38 ; ;end-calc
call NEXT_LOOP ; routine NEXT-LOOP tests against limit.
ret c ; return if no more iterations possible.
ld hl,(MEM) ; find start of variable contents from MEM.
ld de,0x000F ; add 3*5 to
add hl,de ; address the looping line number
ldi de,(hl) ; low byte to E
; high byte to D
; address looping statement
ld h,(hl) ; and store in H
ex de,hl ; swap registers
jp GO_TO_2 ; exit via GO-TO-2 to execute another loop.
; ---
;; REPORT-1
REPORT_1:
rst 0x08 ; ERROR-1
defb 0x00 ; Error Report: NEXT without FOR
; -----------------
; Perform NEXT loop
; -----------------
; This routine is called from the FOR command to test for an initial
; iteration and from the NEXT command to test for all subsequent iterations.
; the system variable MEM addresses the variable's contents which, in the
; latter case, have had the step, possibly negative, added to the value.
;; NEXT-LOOP
NEXT_LOOP:
rst 0x28 ; ; FP-CALC
defb 0xE1 ; ;get-mem-1 l.
defb 0xE0 ; ;get-mem-0 l,v.
defb 0xE2 ; ;get-mem-2 l,v,s.
defb 0x36 ; ;less-0 l,v,(1/0) negative step ?
defb 0x00 ; ;jump-true l,v.(1/0)
defb 0x02 ; ;to L1DE2, NEXT-1 if step negative
defb 0x01 ; ;exchange v,l.
;; NEXT-1
NEXT_1:
defb 0x03 ; ;subtract l-v OR v-l.
defb 0x37 ; ;greater-0 (1/0)
defb 0x00 ; ;jump-true .
defb 0x04 ; ;to L1DE9, NEXT-2 if no more iterations.
defb 0x38 ; ;end-calc .
and a ; clear carry flag signalling another loop.
ret ; return
; ---
;; NEXT-2
NEXT_2:
defb 0x38 ; ;end-calc .
scf ; set carry flag signalling looping exhausted.
ret ; return
; -------------------
; Handle READ command
; -------------------
; e.g. READ a, b$, c$(1000 TO 3000)
; A list of comma-separated variables is assigned from a list of
; comma-separated expressions.
; As it moves along the first list, the character address CH_ADD is stored
; in X_PTR while CH_ADD is used to read the second list.
;; READ-3
READ_3:
rst 0x20 ; NEXT-CHAR
; -> Entry point.
;; READ
READ:
call CLASS_01 ; routine CLASS-01 checks variable.
call SYNTAX_Z ; routine SYNTAX-Z
jr z,READ_2 ; forward to READ-2 if checking syntax
rst 0x18 ; GET-CHAR
ld (X_PTR),hl ; save character position in X_PTR.
ld hl,(DATADD) ; load HL with Data Address DATADD, which is
; the start of the program or the address
; after the last expression that was read or
; the address of the line number of the
; last RESTORE command.
ld a,(hl) ; fetch character
cp 0x2C ; is it a comma ?
jr z,READ_1 ; forward to READ-1 if so.
; else all data in this statement has been read so look for next DATA token
ld e,0xE4 ; token 'DATA'
call LOOK_PROG ; routine LOOK-PROG
jr nc,READ_1 ; forward to READ-1 if DATA found
; else report the error.
;; REPORT-E
REPORT_E:
rst 0x08 ; ERROR-1
defb 0x0D ; Error Report: Out of DATA
;; READ-1
READ_1:
call TEMP_PTR1 ; routine TEMP-PTR1 advances updating CH_ADD
; with new DATADD position.
call VAL_FET_1 ; routine VAL-FET-1 assigns value to variable
; checking type match and adjusting CH_ADD.
rst 0x18 ; GET-CHAR fetches adjusted character position
ld (DATADD),hl ; store back in DATADD
ld hl,(X_PTR) ; fetch X_PTR the original READ CH_ADD
ld (iy+0x26),0x00 ; now nullify X_PTR_hi
call TEMP_PTR2 ; routine TEMP-PTR2 restores READ CH_ADD
;; READ-2
READ_2:
rst 0x18 ; GET-CHAR
cp 0x2C ; is it ',' indicating more variables to read ?
jr z,READ_3 ; back to READ-3 if so
call CHECK_END ; routine CHECK-END
ret ; return from here in runtime to STMT-RET.
; -------------------
; Handle DATA command
; -------------------
; In runtime this 'command' is passed by but the syntax is checked when such
; a statement is found while parsing a line.
; e.g. DATA 1, 2, "text", score-1, a$(location, room, object), FN r(49),
; wages - tax, TRUE, The meaning of life
;; DATA
DATA:
call SYNTAX_Z ; routine SYNTAX-Z to check status
jr nz,DATA_2 ; forward to DATA-2 if in runtime
;; DATA-1
DATA_1:
call SCANNING ; routine SCANNING to check syntax of
; expression
cp 0x2C ; is it a comma ?
call nz,CHECK_END ; routine CHECK-END checks that statement
; is complete. Will make an early exit if
; so. >>>
rst 0x20 ; NEXT-CHAR
jr DATA_1 ; back to DATA-1
; ---
;; DATA-2
DATA_2:
ld a,0xE4 ; set token to 'DATA' and continue into
; the PASS-BY routine.
; ----------------------------------
; Check statement for DATA or DEF FN
; ----------------------------------
; This routine is used to backtrack to a command token and then
; forward to the next statement in runtime.
;; PASS-BY
PASS_BY:
ld b,a ; Give BC enough space to find token.
cpdr ; Compare decrement and repeat. (Only use).
; Work backwards till keyword is found which
; is start of statement before any quotes.
; HL points to location before keyword.
ld de,0x0200 ; count 1+1 statements, dummy value in E to
; inhibit searching for a token.
jp EACH_STMT ; to EACH-STMT to find next statement
; -----------------------------------------------------------------------
; A General Note on Invalid Line Numbers.
; =======================================
; One of the revolutionary concepts of Sinclair BASIC was that it supported
; virtual line numbers. That is the destination of a GO TO, RESTORE etc. need
; not exist. It could be a point before or after an actual line number.
; Zero suffices for a before but the after should logically be infinity.
; Since the maximum actual line limit is 9999 then the system limit, 16383
; when variables kick in, would serve fine as a virtual end point.
; However, ironically, only the LOAD command gets it right. It will not
; autostart a program that has been saved with a line higher than 16383.
; All the other commands deal with the limit unsatisfactorily.
; LIST, RUN, GO TO, GO SUB and RESTORE have problems and the latter may
; crash the machine when supplied with an inappropriate virtual line number.
; This is puzzling as very careful consideration must have been given to
; this point when the new variable types were allocated their masks and also
; when the routine NEXT-ONE was successfully re-written to reflect this.
; An enigma.
; -------------------------------------------------------------------------
; ----------------------
; Handle RESTORE command
; ----------------------
; The restore command sets the system variable for the data address to
; point to the location before the supplied line number or first line
; thereafter.
; This alters the position where subsequent READ commands look for data.
; Note. If supplied with inappropriate high numbers the system may crash
; in the LINE-ADDR routine as it will pass the program/variables end-marker
; and then lose control of what it is looking for - variable or line number.
; - observation, Steven Vickers, 1984, Pitman.
;; RESTORE
RESTORE:
call FIND_INT2 ; routine FIND-INT2 puts integer in BC.
; Note. B should be checked against limit $3F
; and an error generated if higher.
; this entry point is used from RUN command with BC holding zero
;; REST-RUN
REST_RUN:
ld hl,bc ; transfer the line
; number to the HL register.
call LINE_ADDR ; routine LINE-ADDR to fetch the address.
dec hl ; point to the location before the line.
ld (DATADD),hl ; update system variable DATADD.
ret ; return to STMT-RET (or RUN)
; ------------------------
; Handle RANDOMIZE command
; ------------------------
; This command sets the SEED for the RND function to a fixed value.
; With the parameter zero, a random start point is used depending on
; how long the computer has been switched on.
;; RANDOMIZE
RANDOMIZE:
call FIND_INT2 ; routine FIND-INT2 puts parameter in BC.
ld a,b ; test this
or c ; for zero.
jr nz,RAND_1 ; forward to RAND-1 if not zero.
ld bc,(FRAMES) ; use the lower two bytes at FRAMES1.
;; RAND-1
RAND_1:
ld (SEED),bc ; place in SEED system variable.
ret ; return to STMT-RET
; -----------------------
; Handle CONTINUE command
; -----------------------
; The CONTINUE command transfers the OLD (but incremented) values of
; line number and statement to the equivalent "NEW VALUE" system variables
; by using the last part of GO TO and exits indirectly to STMT-RET.
;; CONTINUE
CONTINUE:
ld hl,(OLDPPC) ; fetch OLDPPC line number.
ld d,(iy+OSPCC-IY0) ; fetch OSPPC statement.
jr GO_TO_2 ; forward to GO-TO-2
; --------------------
; Handle GO TO command
; --------------------
; The GO TO command routine is also called by GO SUB and RUN routines
; to evaluate the parameters of both commands.
; It updates the system variables used to fetch the next line/statement.
; It is at STMT-RET that the actual change in control takes place.
; Unlike some BASICs the line number need not exist.
; Note. the high byte of the line number is incorrectly compared with $F0
; instead of $3F. This leads to commands with operands greater than 32767
; being considered as having been run from the editing area and the
; error report 'Statement Lost' is given instead of 'OK'.
; - Steven Vickers, 1984.
;; GO-TO
GO_TO:
call FIND_INT2 ; routine FIND-INT2 puts operand in BC
ld hl,bc ; transfer line
; number to HL.
ld d,0x00 ; set statement to 0 - first.
ld a,h ; compare high byte only
cp 0xF0 ; to $F0 i.e. 61439 in full.
jr nc,REPORT_Bb ; forward to REPORT-B if above.
; This call entry point is used to update the system variables e.g. by RETURN.
;; GO-TO-2
GO_TO_2:
ld (NEWPPC),hl ; save line number in NEWPPC
ld (iy+NSPPC-IY0),d ; and statement in NSPPC
ret ; to STMT-RET (or GO-SUB command)
; ------------------
; Handle OUT command
; ------------------
; Syntax has been checked and the two comma-separated values are on the
; calculator stack.
;; OUT
OUT_BAS:
call TWO_PARAM ; routine TWO-PARAM fetches values
; to BC and A.
out (c),a ; perform the operation.
ret ; return to STMT-RET.
; -------------------
; Handle POKE command
; -------------------
; This routine alters a single byte in the 64K address space.
; Happily no check is made as to whether ROM or RAM is addressed.
; Sinclair BASIC requires no poking of system variables.
;; POKE
POKE:
call TWO_PARAM ; routine TWO-PARAM fetches values
; to BC and A.
ld (bc),a ; load memory location with A.
ret ; return to STMT-RET.
; ------------------------------------
; Fetch two parameters from calculator stack
; ------------------------------------
; This routine fetches a byte and word from the calculator stack
; producing an error if either is out of range.
;; TWO-PARAM
TWO_PARAM:
call FP_TO_A ; routine FP-TO-A
jr c,REPORT_Bb ; forward to REPORT-B if overflow occurred
jr z,TWO_P_1 ; forward to TWO-P-1 if positive
neg ; negative numbers are made positive
;; TWO-P-1
TWO_P_1:
push af ; save the value
call FIND_INT2 ; routine FIND-INT2 gets integer to BC
pop af ; restore the value
ret ; return
; -------------
; Find integers
; -------------
; The first of these routines fetches a 8-bit integer (range 0-255) from the
; calculator stack to the accumulator and is used for colours, streams,
; durations and coordinates.
; The second routine fetches 16-bit integers to the BC register pair
; and is used to fetch command and function arguments involving line numbers
; or memory addresses and also array subscripts and tab arguments.
; ->
;; FIND-INT1
FIND_INT1:
call FP_TO_A ; routine FP-TO-A
jr FIND_I_1 ; forward to FIND-I-1 for common exit routine.
; ---
; ->
;; FIND-INT2
FIND_INT2:
call FP_TO_BC ; routine FP-TO-BC
;; FIND-I-1
FIND_I_1:
jr c,REPORT_Bb ; to REPORT-Bb with overflow.
ret z ; return if positive.
;; REPORT-Bb
REPORT_Bb:
rst 0x08 ; ERROR-1
defb 0x0A ; Error Report: Integer out of range
; ------------------
; Handle RUN command
; ------------------
; This command runs a program starting at an optional line.
; It performs a 'RESTORE 0' then CLEAR
;; RUN
RUN:
call GO_TO ; routine GO-TO puts line number in
; system variables.
ld bc,0x0000 ; prepare to set DATADD to first line.
call REST_RUN ; routine REST-RUN does the 'restore'.
; Note BC still holds zero.
jr CLEAR_RUN ; forward to CLEAR-RUN to clear variables
; without disturbing RAMTOP and
; exit indirectly to STMT-RET
; --------------------
; Handle CLEAR command
; --------------------
; This command reclaims the space used by the variables.
; It also clears the screen and the GO SUB stack.
; With an integer expression, it sets the uppermost memory
; address within the BASIC system.
; "Contrary to the manual, CLEAR doesn't execute a RESTORE" -
; Steven Vickers, Pitman Pocket Guide to the Spectrum, 1984.
;; CLEAR
CLEAR:
call FIND_INT2 ; routine FIND-INT2 fetches to BC.
;; CLEAR-RUN
CLEAR_RUN:
ld a,b ; test for
or c ; zero.
jr nz,CLEAR_1 ; skip to CLEAR-1 if not zero.
ld bc,(RAMTOP) ; use the existing value of RAMTOP if zero.
;; CLEAR-1
CLEAR_1:
push bc ; save ramtop value.
ld de,(VARS) ; fetch VARS
ld hl,(E_LINE) ; fetch E_LINE
dec hl ; adjust to point at variables end-marker.
call RECLAIM_1 ; routine RECLAIM-1 reclaims the space used by
; the variables.
call CLS ; routine CLS to clear screen.
ld hl,(STKEND) ; fetch STKEND the start of free memory.
ld de,0x0032 ; allow for another 50 bytes.
add hl,de ; add the overhead to HL.
pop de ; restore the ramtop value.
sbc hl,de ; if HL is greater than the value then jump
jr nc,REPORT_M ; forward to REPORT-M
; 'RAMTOP no good'
ld hl,(P_RAMT) ; now P-RAMT ($7FFF on 16K RAM machine)
and a ; exact this time.
sbc hl,de ; new ramtop must be lower or the same.
jr nc,CLEAR_2 ; skip to CLEAR-2 if in actual RAM.
;; REPORT-M
REPORT_M:
rst 0x08 ; ERROR-1
defb 0x15 ; Error Report: RAMTOP no good
;; CLEAR-2
CLEAR_2:
ex de,hl ; transfer ramtop value to HL.
ld (RAMTOP),hl ; update system variable RAMTOP.
pop de ; pop the return address STMT-RET.
pop bc ; pop the Error Address.
ldd (hl),0x3E ; now put the GO SUB end-marker at RAMTOP.
; leave a location beneath it.
ld sp,hl ; initialize the machine stack pointer.
push bc ; push the error address.
ld (ERR_SP),sp ; make ERR_SP point to location.
ex de,hl ; put STMT-RET in HL.
jp (hl) ; and go there directly.
; ---------------------
; Handle GO SUB command
; ---------------------
; The GO SUB command diverts BASIC control to a new line number
; in a very similar manner to GO TO but
; the current line number and current statement + 1
; are placed on the GO SUB stack as a RETURN point.
;; GO-SUB
GO_SUB:
pop de ; drop the address STMT-RET
ld h,(iy+SUBPPC-IY0) ; fetch statement from SUBPPC and
inc h ; increment it
ex (sp),hl ; swap - error address to HL,
; H (statement) at top of stack,
; L (unimportant) beneath.
inc sp ; adjust to overwrite unimportant byte
ld bc,(PPC) ; fetch the current line number from PPC
push bc ; and PUSH onto GO SUB stack.
; the empty machine-stack can be rebuilt
push hl ; push the error address.
ld (ERR_SP),sp ; make system variable ERR_SP point to it.
push de ; push the address STMT-RET.
call GO_TO ; call routine GO-TO to update the system
; variables NEWPPC and NSPPC.
; then make an indirect exit to STMT-RET via
ld bc,0x0014 ; a 20-byte overhead memory check.
; ----------------------
; Check available memory
; ----------------------
; This routine is used on many occasions when extending a dynamic area
; upwards or the GO SUB stack downwards.
;; TEST-ROOM
TEST_ROOM:
ld hl,(STKEND) ; fetch STKEND
add hl,bc ; add the supplied test value
jr c,REPORT_4 ; forward to REPORT-4 if over $FFFF
ex de,hl ; was less so transfer to DE
ld hl,0x0050 ; test against another 80 bytes
add hl,de ; anyway
jr c,REPORT_4 ; forward to REPORT-4 if this passes $FFFF
sbc hl,sp ; if less than the machine stack pointer
ret c ; then return - OK.
;; REPORT-4
REPORT_4:
ld l,0x03 ; prepare 'Out of Memory'
jp ERROR_3 ; jump back to ERROR-3 at $0055
; Note. this error can't be trapped at $0008
; ------------------------------
; THE 'FREE MEMORY' USER ROUTINE
; ------------------------------
; This routine is not used by the ROM but allows users to evaluate
; approximate free memory with PRINT 65536 - USR 7962.
;; free-mem
free_mem:
ld bc,0x0000 ; allow no overhead.
call TEST_ROOM ; routine TEST-ROOM.
ld bc,hl ; transfer the result
; to the BC register.
ret ; the USR function returns value of BC.
; --------------------
; THE 'RETURN' COMMAND
; --------------------
; As with any command, there are two values on the machine stack at the time
; it is invoked. The machine stack is below the GOSUB stack. Both grow
; downwards, the machine stack by two bytes, the GOSUB stack by 3 bytes.
; The highest location is a statement byte followed by a two-byte line number.
;; RETURN
RETURN:
pop bc ; drop the address STMT-RET.
pop hl ; now the error address.
pop de ; now a possible BASIC return line.
ld a,d ; the high byte $00 - $27 is
cp 0x3E ; compared with the traditional end-marker $3E.
jr z,REPORT_7 ; forward to REPORT-7 with a match.
; 'RETURN without GOSUB'
; It was not the end-marker so a single statement byte remains at the base of
; the calculator stack. It can't be popped off.
dec sp ; adjust stack pointer to create room for two
; bytes.
ex (sp),hl ; statement to H, error address to base of
; new machine stack.
ex de,hl ; statement to D, BASIC line number to HL.
ld (ERR_SP),sp ; adjust ERR_SP to point to new stack pointer
push bc ; now re-stack the address STMT-RET
jp GO_TO_2 ; to GO-TO-2 to update statement and line
; system variables and exit indirectly to the
; address just pushed on stack.
; ---
;; REPORT-7
REPORT_7:
push de ; replace the end-marker.
push hl ; now restore the error address
; as will be required in a few clock cycles.
rst 0x08 ; ERROR-1
defb 0x06 ; Error Report: RETURN without GOSUB
; --------------------
; Handle PAUSE command
; --------------------
; The pause command takes as its parameter the number of interrupts
; for which to wait. PAUSE 50 pauses for about a second.
; PAUSE 0 pauses indefinitely.
; Both forms can be finished by pressing a key.
;; PAUSE
PAUSE:
call FIND_INT2 ; routine FIND-INT2 puts value in BC
;; PAUSE-1
PAUSE_1:
halt ; wait for interrupt.
dec bc ; decrease counter.
ld a,b ; test if
or c ; result is zero.
jr z,PAUSE_END ; forward to PAUSE-END if so.
ld a,b ; test if
and c ; now $FFFF
inc a ; that is, initially zero.
jr nz,PAUSE_2 ; skip forward to PAUSE-2 if not.
inc bc ; restore counter to zero.
;; PAUSE-2
PAUSE_2:
bit 5,(iy+FLAGS-IY0) ; test FLAGS - has a new key been pressed ?
jr z,PAUSE_1 ; back to PAUSE-1 if not.
;; PAUSE-END
PAUSE_END:
res 5,(iy+FLAGS-IY0) ; update FLAGS - signal no new key
ret ; and return.
; -------------------
; Check for BREAK key
; -------------------
; This routine is called from COPY-LINE, when interrupts are disabled,
; to test if BREAK (SHIFT - SPACE) is being pressed.
; It is also called at STMT-RET after every statement.
;; BREAK-KEY
BREAK_KEY:
ld a,0x7F ; Input address: $7FFE
in a,(0xFE) ; read lower right keys
rra ; rotate bit 0 - SPACE
ret c ; return if not reset
ld a,0xFE ; Input address: $FEFE
in a,(0xFE) ; read lower left keys
rra ; rotate bit 0 - SHIFT
ret ; carry will be set if not pressed.
; return with no carry if both keys
; pressed.
; ---------------------
; Handle DEF FN command
; ---------------------
; e.g. DEF FN r$(a$,a) = a$(a TO )
; this 'command' is ignored in runtime but has its syntax checked
; during line-entry.
;; DEF-FN
DEF_FN:
call SYNTAX_Z ; routine SYNTAX-Z
jr z,DEF_FN_1 ; forward to DEF-FN-1 if parsing
ld a,0xCE ; else load A with 'DEF FN' and
jp PASS_BY ; jump back to PASS-BY
; ---
; continue here if checking syntax.
;; DEF-FN-1
DEF_FN_1:
set 6,(iy+FLAGS-IY0) ; set FLAGS - Assume numeric result
call ALPHA ; call routine ALPHA
jr nc,DEF_FN_4 ; if not then to DEF-FN-4 to jump to
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR
cp 0x24 ; is it '$' ?
jr nz,DEF_FN_2 ; to DEF-FN-2 if not as numeric.
res 6,(iy+FLAGS-IY0) ; set FLAGS - Signal string result
rst 0x20 ; get NEXT-CHAR
;; DEF-FN-2
DEF_FN_2:
cp 0x28 ; is it '(' ?
jr nz,DEF_FN_7 ; to DEF-FN-7 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR
cp 0x29 ; is it ')' ?
jr z,DEF_FN_6 ; to DEF-FN-6 if null argument
;; DEF-FN-3
DEF_FN_3:
call ALPHA ; routine ALPHA checks that it is the expected
; alphabetic character.
;; DEF-FN-4
DEF_FN_4:
jp nc,REPORT_C ; to REPORT-C if not
; 'Nonsense in BASIC'.
ex de,hl ; save pointer in DE
rst 0x20 ; NEXT-CHAR re-initializes HL from CH_ADD
; and advances.
cp 0x24 ; '$' ? is it a string argument.
jr nz,DEF_FN_5 ; forward to DEF-FN-5 if not.
ex de,hl ; save pointer to '$' in DE
rst 0x20 ; NEXT-CHAR re-initializes HL and advances
;; DEF-FN-5
DEF_FN_5:
ex de,hl ; bring back pointer.
ld bc,0x0006 ; the function requires six hidden bytes for
; each parameter passed.
; The first byte will be $0E
; then 5-byte numeric value
; or 5-byte string pointer.
call MAKE_ROOM ; routine MAKE-ROOM creates space in program
; area.
inc hl ; adjust HL (set by LDDR)
inc hl ; to point to first location.
ld (hl),0x0E ; insert the 'hidden' marker.
; Note. these invisible storage locations hold nothing meaningful for the
; moment. They will be used every time the corresponding function is
; evaluated in runtime.
; Now consider the following character fetched earlier.
cp 0x2C ; is it ',' ? (more than one parameter)
jr nz,DEF_FN_6 ; to DEF-FN-6 if not
rst 0x20 ; else NEXT-CHAR
jr DEF_FN_3 ; and back to DEF-FN-3
; ---
;; DEF-FN-6
DEF_FN_6:
cp 0x29 ; should close with a ')'
jr nz,DEF_FN_7 ; to DEF-FN-7 if not
; 'Nonsense in BASIC'
rst 0x20 ; get NEXT-CHAR
cp 0x3D ; is it '=' ?
jr nz,DEF_FN_7 ; to DEF-FN-7 if not 'Nonsense...'
rst 0x20 ; address NEXT-CHAR
ld a,(FLAGS) ; get FLAGS which has been set above
push af ; and preserve
call SCANNING ; routine SCANNING checks syntax of expression
; and also sets flags.
pop af ; restore previous flags
xor (iy+FLAGS-IY0) ; xor with FLAGS - bit 6 should be same
; therefore will be reset.
and 0x40 ; isolate bit 6.
;; DEF-FN-7
DEF_FN_7:
jp nz,REPORT_C ; jump back to REPORT-C if the expected result
; is not the same type.
; 'Nonsense in BASIC'
call CHECK_END ; routine CHECK-END will return early if
; at end of statement and move onto next
; else produce error report. >>>
; There will be no return to here.
; -------------------------------
; Returning early from subroutine
; -------------------------------
; All routines are capable of being run in two modes - syntax checking mode
; and runtime mode. This routine is called often to allow a routine to return
; early if checking syntax.
;; UNSTACK-Z
UNSTACK_Z:
call SYNTAX_Z ; routine SYNTAX-Z sets zero flag if syntax
; is being checked.
pop hl ; drop the return address.
ret z ; return to previous call in chain if checking
; syntax.
jp (hl) ; jump to return address as BASIC program is
; actually running.
; ---------------------
; Handle LPRINT command
; ---------------------
; A simple form of 'PRINT #3' although it can output to 16 streams.
; Probably for compatibility with other BASICs particularly ZX81 BASIC.
; An extra UDG might have been better.
;; LPRINT
LPRINT:
ld a,0x03 ; the printer channel
jr PRINT_1 ; forward to PRINT-1
; ---------------------
; Handle PRINT commands
; ---------------------
; The Spectrum's main stream output command.
; The default stream is stream 2 which is normally the upper screen
; of the computer. However the stream can be altered in range 0 - 15.
;; PRINT
PRINT:
ld a,0x02 ; the stream for the upper screen.
; The LPRINT command joins here.
;; PRINT-1
PRINT_1:
call SYNTAX_Z ; routine SYNTAX-Z checks if program running
call nz,CHAN_OPEN ; routine CHAN-OPEN if so
call TEMPS ; routine TEMPS sets temporary colours.
call PRINT_2 ; routine PRINT-2 - the actual item
call CHECK_END ; routine CHECK-END gives error if not at end
; of statement
ret ; and return >>>
; ------------------------------------
; this subroutine is called from above
; and also from INPUT.
;; PRINT-2
PRINT_2:
rst 0x18 ; GET-CHAR gets printable character
call PR_END_Z ; routine PR-END-Z checks if more printing
jr z,PRINT_4 ; to PRINT-4 if not e.g. just 'PRINT :'
; This tight loop deals with combinations of positional controls and
; print items. An early return can be made from within the loop
; if the end of a print sequence is reached.
;; PRINT-3
PRINT_3:
call PR_POSN_1 ; routine PR-POSN-1 returns zero if more
; but returns early at this point if
; at end of statement!
jr z,PRINT_3 ; to PRINT-3 if consecutive positioners
call PR_ITEM_1 ; routine PR-ITEM-1 deals with strings etc.
call PR_POSN_1 ; routine PR-POSN-1 for more position codes
jr z,PRINT_3 ; loop back to PRINT-3 if so
;; PRINT-4
PRINT_4:
cp 0x29 ; return now if this is ')' from input-item.
; (see INPUT.)
ret z ; or continue and print carriage return in
; runtime
; ---------------------
; Print carriage return
; ---------------------
; This routine which continues from above prints a carriage return
; in run-time. It is also called once from PRINT-POSN.
;; PRINT-CR
PRINT_CR:
call UNSTACK_Z ; routine UNSTACK-Z
ld a,0x0D ; prepare a carriage return
rst 0x10 ; PRINT-A
ret ; return
; -----------
; Print items
; -----------
; This routine deals with print items as in
; PRINT AT 10,0;"The value of A is ";a
; It returns once a single item has been dealt with as it is part
; of a tight loop that considers sequences of positional and print items
;; PR-ITEM-1
PR_ITEM_1:
rst 0x18 ; GET-CHAR
cp 0xAC ; is character 'AT' ?
jr nz,PR_ITEM_2 ; forward to PR-ITEM-2 if not.
call NEXT_2NUM ; routine NEXT-2NUM check for two comma
; separated numbers placing them on the
; calculator stack in runtime.
call UNSTACK_Z ; routine UNSTACK-Z quits if checking syntax.
call STK_TO_BC ; routine STK-TO-BC get the numbers in B and C.
ld a,0x16 ; prepare the 'at' control.
jr PR_AT_TAB ; forward to PR-AT-TAB to print the sequence.
; ---
;; PR-ITEM-2
PR_ITEM_2:
cp 0xAD ; is character 'TAB' ?
jr nz,PR_ITEM_3 ; to PR-ITEM-3 if not
rst 0x20 ; NEXT-CHAR to address next character
call EXPT_1NUM ; routine EXPT-1NUM
call UNSTACK_Z ; routine UNSTACK-Z quits if checking syntax.
call FIND_INT2 ; routine FIND-INT2 puts integer in BC.
ld a,0x17 ; prepare the 'tab' control.
;; PR-AT-TAB
PR_AT_TAB:
rst 0x10 ; PRINT-A outputs the control
ld a,c ; first value to A
rst 0x10 ; PRINT-A outputs it.
ld a,b ; second value
rst 0x10 ; PRINT-A
ret ; return - item finished >>>
; ---
; Now consider paper 2; #2; a$
;; PR-ITEM-3
PR_ITEM_3:
call CO_TEMP_3 ; routine CO-TEMP-3 will print any colour
ret nc ; items - return if success.
call STR_ALTER ; routine STR-ALTER considers new stream
ret nc ; return if altered.
call SCANNING ; routine SCANNING now to evaluate expression
call UNSTACK_Z ; routine UNSTACK-Z if not runtime.
bit 6,(iy+FLAGS-IY0) ; test FLAGS - Numeric or string result ?
call z,STK_FETCH ; routine STK-FETCH if string.
; note no flags affected.
jp nz,PRINT_FP ; to PRINT-FP to print if numeric >>>
; It was a string expression - start in DE, length in BC
; Now enter a loop to print it
;; PR-STRING
PR_STRING:
ld a,b ; this tests if the
or c ; length is zero and sets flag accordingly.
dec bc ; this doesn't but decrements counter.
ret z ; return if zero.
ldi a,(de) ; fetch character.
; address next location.
rst 0x10 ; PRINT-A.
jr PR_STRING ; loop back to PR-STRING.
; ---------------
; End of printing
; ---------------
; This subroutine returns zero if no further printing is required
; in the current statement.
; The first terminator is found in escaped input items only,
; the others in print_items.
;; PR-END-Z
PR_END_Z:
cp 0x29 ; is character a ')' ?
ret z ; return if so - e.g. INPUT (p$); a$
;; PR-ST-END
PR_ST_END:
cp 0x0D ; is it a carriage return ?
ret z ; return also - e.g. PRINT a
cp 0x3A ; is character a ':' ?
ret ; return - zero flag will be set if so.
; e.g. PRINT a :
; --------------
; Print position
; --------------
; This routine considers a single positional character ';', ',', '''
;; PR-POSN-1
PR_POSN_1:
rst 0x18 ; GET-CHAR
cp 0x3B ; is it ';' ?
; i.e. print from last position.
jr z,PR_POSN_3 ; forward to PR-POSN-3 if so.
; i.e. do nothing.
cp 0x2C ; is it ',' ?
; i.e. print at next tabstop.
jr nz,PR_POSN_2 ; forward to PR-POSN-2 if anything else.
call SYNTAX_Z ; routine SYNTAX-Z
jr z,PR_POSN_3 ; forward to PR-POSN-3 if checking syntax.
ld a,0x06 ; prepare the 'comma' control character.
rst 0x10 ; PRINT-A outputs to current channel in
; run-time.
jr PR_POSN_3 ; skip to PR-POSN-3.
; ---
; check for newline.
;; PR-POSN-2
PR_POSN_2:
cp 0x27 ; is character a "'" ? (newline)
ret nz ; return if no match >>>
call PRINT_CR ; routine PRINT-CR outputs a carriage return
; in runtime only.
;; PR-POSN-3
PR_POSN_3:
rst 0x20 ; NEXT-CHAR to A.
call PR_END_Z ; routine PR-END-Z checks if at end.
jr nz,PR_POSN_4 ; to PR-POSN-4 if not.
pop bc ; drop return address if at end.
;; PR-POSN-4
PR_POSN_4:
cp a ; reset the zero flag.
ret ; and return to loop or quit.
; ------------
; Alter stream
; ------------
; This routine is called from PRINT ITEMS above, and also LIST as in
; LIST #15
;; STR-ALTER
STR_ALTER:
cp 0x23 ; is character '#' ?
scf ; set carry flag.
ret nz ; return if no match.
rst 0x20 ; NEXT-CHAR
call EXPT_1NUM ; routine EXPT-1NUM gets stream number
and a ; prepare to exit early with carry reset
call UNSTACK_Z ; routine UNSTACK-Z exits early if parsing
call FIND_INT1 ; routine FIND-INT1 gets number off stack
cp 0x10 ; must be range 0 - 15 decimal.
jp nc,REPORT_Oa ; jump back to REPORT-Oa if not
; 'Invalid stream'.
call CHAN_OPEN ; routine CHAN-OPEN
and a ; clear carry - signal item dealt with.
ret ; return
; -------------------
; THE 'INPUT' COMMAND
; -------------------
; This command is mysterious.
;
;; INPUT
INPUT:
call SYNTAX_Z ; routine SYNTAX-Z to check if in runtime.
jr z,INPUT_1 ; forward to INPUT-1 if checking syntax.
ld a,0x01 ; select channel 'K' the keyboard for input.
call CHAN_OPEN ; routine CHAN-OPEN opens the channel and sets
; bit 0 of TV_FLAG.
; Note. As a consequence of clearing the lower screen channel 0 is made
; the current channel so the above two instructions are superfluous.
call CLS_LOWER ; routine CLS-LOWER clears the lower screen
; and sets DF_SZ to two and TV_FLAG to $01.
;; INPUT-1
INPUT_1:
ld (iy+TV_FLAG-IY0),0x01
; update TV_FLAG - signal lower screen in use
; ensuring that the correct set of system
; variables are updated and that the border
; colour is used.
; Note. The Complete Spectrum ROM Disassembly incorrectly names DF-SZ as the
; system variable that is updated above and if, as some have done, you make
; this unnecessary alteration then there will be two blank lines between the
; lower screen and the upper screen areas which will also scroll wrongly.
call IN_ITEM_1 ; routine IN-ITEM-1 to handle the input.
call CHECK_END ; routine CHECK-END will make an early exit
; if checking syntax. >>>
; Keyboard input has been made and it remains to adjust the upper
; screen in case the lower two lines have been extended upwards.
ld bc,(S_POSN) ; fetch S_POSN current line/column of
; the upper screen.
ld a,(DF_SZ) ; fetch DF_SZ the display file size of
; the lower screen.
cp b ; test that lower screen does not overlap
jr c,INPUT_2 ; forward to INPUT-2 if not.
; the two screens overlap so adjust upper screen.
ld c,0x21 ; set column of upper screen to leftmost.
ld b,a ; and line to one above lower screen.
; continue forward to update upper screen
; print position.
;; INPUT-2
INPUT_2:
ld (S_POSN),bc ; set S_POSN update upper screen line/column.
ld a,0x19 ; subtract from twenty five
sub b ; the new line number.
ld (SCR_CT),a ; and place result in SCR_CT - scroll count.
res 0,(iy+TV_FLAG-IY0) ; update TV_FLAG - signal main screen in use.
call CL_SET ; routine CL-SET sets the print position
; system variables for the upper screen.
jp CLS_LOWER ; jump back to CLS-LOWER and make
; an indirect exit >>.
; ---------------------
; INPUT ITEM subroutine
; ---------------------
; This subroutine deals with the input items and print items.
; from the current input channel.
; It is only called from the above INPUT routine but was obviously
; once called from somewhere else in another context.
;; IN-ITEM-1
IN_ITEM_1:
call PR_POSN_1 ; routine PR-POSN-1 deals with a single
; position item at each call.
jr z,IN_ITEM_1 ; back to IN-ITEM-1 until no more in a
; sequence.
cp 0x28 ; is character '(' ?
jr nz,IN_ITEM_2 ; forward to IN-ITEM-2 if not.
; any variables within braces will be treated as part, or all, of the prompt
; instead of being used as destination variables.
rst 0x20 ; NEXT-CHAR
call PRINT_2 ; routine PRINT-2 to output the dynamic
; prompt.
rst 0x18 ; GET-CHAR
cp 0x29 ; is character a matching ')' ?
jp nz,REPORT_C ; jump back to REPORT-C if not.
; 'Nonsense in BASIC'.
rst 0x20 ; NEXT-CHAR
jp IN_NEXT_2 ; forward to IN-NEXT-2
; ---
;; IN-ITEM-2
IN_ITEM_2:
cp 0xCA ; is the character the token 'LINE' ?
jr nz,IN_ITEM_3 ; forward to IN-ITEM-3 if not.
rst 0x20 ; NEXT-CHAR - variable must come next.
call CLASS_01 ; routine CLASS-01 returns destination
; address of variable to be assigned.
; or generates an error if no variable
; at this position.
set 7,(iy+FLAGX-IY0) ; update FLAGX - signal handling INPUT LINE
bit 6,(iy+FLAGS-IY0) ; test FLAGS - numeric or string result ?
jp nz,REPORT_C ; jump back to REPORT-C if not string
; 'Nonsense in BASIC'.
jr IN_PROMPT ; forward to IN-PROMPT to set up workspace.
; ---
; the jump was here for other variables.
;; IN-ITEM-3
IN_ITEM_3:
call ALPHA ; routine ALPHA checks if character is
; a suitable variable name.
jp nc,IN_NEXT_1 ; forward to IN-NEXT-1 if not
call CLASS_01 ; routine CLASS-01 returns destination
; address of variable to be assigned.
res 7,(iy+FLAGX-IY0) ; update FLAGX - signal not INPUT LINE.
;; IN-PROMPT
IN_PROMPT:
call SYNTAX_Z ; routine SYNTAX-Z
jp z,IN_NEXT_2 ; forward to IN-NEXT-2 if checking syntax.
call SET_WORK ; routine SET-WORK clears workspace.
ld hl,FLAGX ; point to system variable FLAGX
res 6,(hl) ; signal string result.
set 5,(hl) ; signal in Input Mode for editor.
ld bc,0x0001 ; initialize space required to one for
; the carriage return.
bit 7,(hl) ; test FLAGX - INPUT LINE in use ?
jr nz,IN_PR_2 ; forward to IN-PR-2 if so as that is
; all the space that is required.
ld a,(FLAGS) ; load accumulator from FLAGS
and 0x40 ; mask to test BIT 6 of FLAGS and clear
; the other bits in A.
; numeric result expected ?
jr nz,IN_PR_1 ; forward to IN-PR-1 if so
ld c,0x03 ; increase space to three bytes for the
; pair of surrounding quotes.
;; IN-PR-1
IN_PR_1:
or (hl) ; if numeric result, set bit 6 of FLAGX.
ld (hl),a ; and update system variable
;; IN-PR-2
IN_PR_2:
rst 0x30 ; BC-SPACES opens 1 or 3 bytes in workspace
ld (hl),0x0D ; insert carriage return at last new location.
ld a,c ; fetch the length, one or three.
rrca ; lose bit 0.
rrca ; test if quotes required.
jr nc,IN_PR_3 ; forward to IN-PR-3 if not.
ld a,0x22 ; load the '"' character
ld (de),a ; place quote in first new location at DE.
dec hl ; decrease HL - from carriage return.
ld (hl),a ; and place a quote in second location.
;; IN-PR-3
IN_PR_3:
ld (K_CUR),hl ; set keyboard cursor K_CUR to HL
bit 7,(iy+FLAGX-IY0) ; test FLAGX - is this INPUT LINE ??
jr nz,IN_VAR_3 ; forward to IN-VAR-3 if so as input will
; be accepted without checking its syntax.
ld hl,(CH_ADD) ; fetch CH_ADD
push hl ; and save on stack.
ld hl,(ERR_SP) ; fetch ERR_SP
push hl ; and save on stack
;; IN-VAR-1
IN_VAR_1:
ld hl,IN_VAR_1 ; address: IN-VAR-1 - this address
push hl ; is saved on stack to handle errors.
bit 4,(iy+FLAGS2-IY0) ; test FLAGS2 - is K channel in use ?
jr z,IN_VAR_2 ; forward to IN-VAR-2 if not using the
; keyboard for input. (??)
ld (ERR_SP),sp ; set ERR_SP to point to IN-VAR-1 on stack.
;; IN-VAR-2
IN_VAR_2:
ld hl,(WORKSP) ; set HL to WORKSP - start of workspace.
call REMOVE_FP ; routine REMOVE-FP removes floating point
; forms when looping in error condition.
ld (iy+ERR_NR-IY0),0xFF ; set ERR_NR to 'OK' cancelling the error.
; but X_PTR causes flashing error marker
; to be displayed at each call to the editor.
call EDITOR ; routine EDITOR allows input to be entered
; or corrected if this is second time around.
; if we pass to next then there are no system errors
res 7,(iy+FLAGS-IY0) ; update FLAGS - signal checking syntax
call IN_ASSIGN ; routine IN-ASSIGN checks syntax using
; the VAL-FET-2 and powerful SCANNING routines.
; any syntax error and its back to IN-VAR-1.
; but with the flashing error marker showing
; where the error is.
; Note. the syntax of string input has to be
; checked as the user may have removed the
; bounding quotes or escaped them as with
; "hat" + "stand" for example.
; proceed if syntax passed.
jr IN_VAR_4 ; jump forward to IN-VAR-4
; ---
; the jump was to here when using INPUT LINE.
;; IN-VAR-3
IN_VAR_3:
call EDITOR ; routine EDITOR is called for input
; when ENTER received rejoin other route but with no syntax check.
; INPUT and INPUT LINE converge here.
;; IN-VAR-4
IN_VAR_4:
ld (iy+0x22),0x00 ; set K_CUR_hi to a low value so that the cursor
; no longer appears in the input line.
call IN_CHAN_K ; routine IN-CHAN-K tests if the keyboard
; is being used for input.
jr nz,IN_VAR_5 ; forward to IN-VAR-5 if using another input
; channel.
; continue here if using the keyboard.
call ED_COPY ; routine ED-COPY overprints the edit line
; to the lower screen. The only visible
; affect is that the cursor disappears.
; if you're inputting more than one item in
; a statement then that becomes apparent.
ld bc,(ECHO_E) ; fetch line and column from ECHO_E
call CL_SET ; routine CL-SET sets S-POSNL to those
; values.
; if using another input channel rejoin here.
;; IN-VAR-5
IN_VAR_5:
ld hl,FLAGX ; point HL to FLAGX
res 5,(hl) ; signal not in input mode
bit 7,(hl) ; is this INPUT LINE ?
res 7,(hl) ; cancel the bit anyway.
jr nz,IN_VAR_6 ; forward to IN-VAR-6 if INPUT LINE.
pop hl ; drop the looping address
pop hl ; drop the address of previous
; error handler.
ld (ERR_SP),hl ; set ERR_SP to point to it.
pop hl ; drop original CH_ADD which points to
; INPUT command in BASIC line.
ld (X_PTR),hl ; save in X_PTR while input is assigned.
set 7,(iy+FLAGS-IY0) ; update FLAGS - Signal running program
call IN_ASSIGN ; routine IN-ASSIGN is called again
; this time the variable will be assigned
; the input value without error.
; Note. the previous example now
; becomes "hatstand"
ld hl,(X_PTR) ; fetch stored CH_ADD value from X_PTR.
ld (iy+0x26),0x00 ; set X_PTR_hi so that iy is no longer relevant.
ld (CH_ADD),hl ; put restored value back in CH_ADD
jr IN_NEXT_2 ; forward to IN-NEXT-2 to see if anything
; more in the INPUT list.
; ---
; the jump was to here with INPUT LINE only
;; IN-VAR-6
IN_VAR_6:
ld hl,(STKBOT) ; STKBOT points to the end of the input.
ld de,(WORKSP) ; WORKSP points to the beginning.
scf ; prepare for true subtraction.
sbc hl,de ; subtract to get length
ld bc,hl ; transfer it to
; the BC register pair.
call STK_STO__ ; routine STK-STO-$ stores parameters on
; the calculator stack.
call LET ; routine LET assigns it to destination.
jr IN_NEXT_2 ; forward to IN-NEXT-2 as print items
; not allowed with INPUT LINE.
; Note. that "hat" + "stand" will, for
; example, be unchanged as also would
; 'PRINT "Iris was here"'.
; ---
; the jump was to here when ALPHA found more items while looking for
; a variable name.
;; IN-NEXT-1
IN_NEXT_1:
call PR_ITEM_1 ; routine PR-ITEM-1 considers further items.
;; IN-NEXT-2
IN_NEXT_2:
call PR_POSN_1 ; routine PR-POSN-1 handles a position item.
jp z,IN_ITEM_1 ; jump back to IN-ITEM-1 if the zero flag
; indicates more items are present.
ret ; return.
; ---------------------------
; INPUT ASSIGNMENT Subroutine
; ---------------------------
; This subroutine is called twice from the INPUT command when normal
; keyboard input is assigned. On the first occasion syntax is checked
; using SCANNING. The final call with the syntax flag reset is to make
; the assignment.
;; IN-ASSIGN
IN_ASSIGN:
ld hl,(WORKSP) ; fetch WORKSP start of input
ld (CH_ADD),hl ; set CH_ADD to first character
rst 0x18 ; GET-CHAR ignoring leading white-space.
cp 0xE2 ; is it 'STOP'
jr z,IN_STOP ; forward to IN-STOP if so.
ld a,(FLAGX) ; load accumulator from FLAGX
call VAL_FET_2 ; routine VAL-FET-2 makes assignment
; or goes through the motions if checking
; syntax. SCANNING is used.
rst 0x18 ; GET-CHAR
cp 0x0D ; is it carriage return ?
ret z ; return if so
; either syntax is OK
; or assignment has been made.
; if another character was found then raise an error.
; User doesn't see report but the flashing error marker
; appears in the lower screen.
;; REPORT-Cb
REPORT_Cb:
rst 0x08 ; ERROR-1
defb 0x0B ; Error Report: Nonsense in BASIC
;; IN-STOP
IN_STOP:
call SYNTAX_Z ; routine SYNTAX-Z (UNSTACK-Z?)
ret z ; return if checking syntax
; as user wouldn't see error report.
; but generate visible error report
; on second invocation.
;; REPORT-H
REPORT_H:
rst 0x08 ; ERROR-1
defb 0x10 ; Error Report: STOP in INPUT
; -----------------------------------
; THE 'TEST FOR CHANNEL K' SUBROUTINE
; -----------------------------------
; This subroutine is called once from the keyboard INPUT command to check if
; the input routine in use is the one for the keyboard.
;; IN-CHAN-K
IN_CHAN_K:
ld hl,(CURCHL) ; fetch address of current channel CURCHL
inc hl
inc hl ; advance past
inc hl ; input and
inc hl ; output streams
ld a,(hl) ; fetch the channel identifier.
cp 0x4B ; test for 'K'
ret ; return with zero set if keyboard is use.
; --------------------
; Colour Item Routines
; --------------------
;
; These routines have 3 entry points -
; 1) CO-TEMP-2 to handle a series of embedded Graphic colour items.
; 2) CO-TEMP-3 to handle a single embedded print colour item.
; 3) CO TEMP-4 to handle a colour command such as FLASH 1
;
; "Due to a bug, if you bring in a peripheral channel and later use a colour
; statement, colour controls will be sent to it by mistake." - Steven Vickers
; Pitman Pocket Guide, 1984.
;
; To be fair, this only applies if the last channel was other than 'K', 'S'
; or 'P', which are all that are supported by this ROM, but if that last
; channel was a microdrive file, network channel etc. then
; PAPER 6; CLS will not turn the screen yellow and
; CIRCLE INK 2; 128,88,50 will not draw a red circle.
;
; This bug does not apply to embedded PRINT items as it is quite permissible
; to mix stream altering commands and colour items.
; The fix therefore would be to ensure that CLASS-07 and CLASS-09 make
; channel 'S' the current channel when not checking syntax.
; -----------------------------------------------------------------
;; CO-TEMP-1
CO_TEMP_1:
rst 0x20 ; NEXT-CHAR
; -> Entry point from CLASS-09. Embedded Graphic colour items.
; e.g. PLOT INK 2; PAPER 8; 128,88
; Loops till all colour items output, finally addressing the coordinates.
;; CO-TEMP-2
CO_TEMP_2:
call CO_TEMP_3 ; routine CO-TEMP-3 to output colour control.
ret c ; return if nothing more to output. ->
rst 0x18 ; GET-CHAR
cp 0x2C ; is it ',' separator ?
jr z,CO_TEMP_1 ; back if so to CO-TEMP-1
cp 0x3B ; is it ';' separator ?
jr z,CO_TEMP_1 ; back to CO-TEMP-1 for more.
jp REPORT_C ; to REPORT-C (REPORT-Cb is within range)
; 'Nonsense in BASIC'
; -------------------
; CO-TEMP-3
; -------------------
; -> this routine evaluates and outputs a colour control and parameter.
; It is called from above and also from PR-ITEM-3 to handle a single embedded
; print item e.g. PRINT PAPER 6; "Hi". In the latter case, the looping for
; multiple items is within the PR-ITEM routine.
; It is quite permissible to send these to any stream.
;; CO-TEMP-3
CO_TEMP_3:
cp 0xD9 ; is it 'INK' ?
ret c ; return if less.
cp 0xDF ; compare with 'OUT'
ccf ; Complement Carry Flag
ret c ; return if greater than 'OVER', $DE.
push af ; save the colour token.
rst 0x20 ; address NEXT-CHAR
pop af ; restore token and continue.
; -> this entry point used by CLASS-07. e.g. the command PAPER 6.
;; CO-TEMP-4
CO_TEMP_4:
sub 0xC9 ; reduce to control character $10 (INK)
; thru $15 (OVER).
push af ; save control.
call EXPT_1NUM ; routine EXPT-1NUM stacks addressed
; parameter on calculator stack.
pop af ; restore control.
and a ; clear carry
call UNSTACK_Z ; routine UNSTACK-Z returns if checking syntax.
push af ; save again
call FIND_INT1 ; routine FIND-INT1 fetches parameter to A.
ld d,a ; transfer now to D
pop af ; restore control.
rst 0x10 ; PRINT-A outputs the control to current
; channel.
ld a,d ; transfer parameter to A.
rst 0x10 ; PRINT-A outputs parameter.
ret ; return. ->
; -------------------------------------------------------------------------
;
; {fl}{br}{ paper }{ ink } The temporary colour attributes
; ___ ___ ___ ___ ___ ___ ___ ___ system variable.
; ATTR_T | | | | | | | | |
; | | | | | | | | |
; 23695 |___|___|___|___|___|___|___|___|
; 7 6 5 4 3 2 1 0
;
;
; {fl}{br}{ paper }{ ink } The temporary mask used for
; ___ ___ ___ ___ ___ ___ ___ ___ transparent colours. Any bit
; MASK_T | | | | | | | | | that is 1 shows that the
; | | | | | | | | | corresponding attribute is
; 23696 |___|___|___|___|___|___|___|___| taken not from ATTR-T but from
; 7 6 5 4 3 2 1 0 what is already on the screen.
;
;
; {paper9 }{ ink9 }{ inv1 }{ over1} The print flags. Even bits are
; ___ ___ ___ ___ ___ ___ ___ ___ temporary flags. The odd bits
; P_FLAG | | | | | | | | | are the permanent flags.
; | p | t | p | t | p | t | p | t |
; 23697 |___|___|___|___|___|___|___|___|
; 7 6 5 4 3 2 1 0
;
; -----------------------------------------------------------------------
; ------------------------------------
; The colour system variable handler.
; ------------------------------------
; This is an exit branch from PO-1-OPER, PO-2-OPER
; A holds control $10 (INK) to $15 (OVER)
; D holds parameter 0-9 for ink/paper 0,1 or 8 for bright/flash,
; 0 or 1 for over/inverse.
;; CO-TEMP-5
CO_TEMP_5:
sub 0x11 ; reduce range $FF-$04
adc a,0x00 ; add in carry if INK
jr z,CO_TEMP_7 ; forward to CO-TEMP-7 with INK and PAPER.
sub 0x02 ; reduce range $FF-$02
adc a,0x00 ; add carry if FLASH
jr z,CO_TEMP_C ; forward to CO-TEMP-C with FLASH and BRIGHT.
cp 0x01 ; is it 'INVERSE' ?
ld a,d ; fetch parameter for INVERSE/OVER
ld b,0x01 ; prepare OVER mask setting bit 0.
jr nz,CO_TEMP_6 ; forward to CO-TEMP-6 if OVER
rlca ; shift bit 0
rlca ; to bit 2
ld b,0x04 ; set bit 2 of mask for inverse.
;; CO-TEMP-6
CO_TEMP_6:
ld c,a ; save the A
ld a,d ; re-fetch parameter
cp 0x02 ; is it less than 2
jr nc,REPORT_K ; to REPORT-K if not 0 or 1.
; 'Invalid colour'.
ld a,c ; restore A
ld hl,P_FLAG ; address system variable P_FLAG
jr CO_CHANGE ; forward to exit via routine CO-CHANGE
; ---
; the branch was here with INK/PAPER and carry set for INK.
;; CO-TEMP-7
CO_TEMP_7:
ld a,d ; fetch parameter
ld b,0x07 ; set ink mask 00000111
jr c,CO_TEMP_8 ; forward to CO-TEMP-8 with INK
rlca ; shift bits 0-2
rlca ; to
rlca ; bits 3-5
ld b,0x38 ; set paper mask 00111000
; both paper and ink rejoin here
;; CO-TEMP-8
CO_TEMP_8:
ld c,a ; value to C
ld a,d ; fetch parameter
cp 0x0A ; is it less than 10d ?
jr c,CO_TEMP_9 ; forward to CO-TEMP-9 if so.
; ink 10 etc. is not allowed.
;; REPORT-K
REPORT_K:
rst 0x08 ; ERROR-1
defb 0x13 ; Error Report: Invalid colour
;; CO-TEMP-9
CO_TEMP_9:
ld hl,ATTR_T ; address system variable ATTR_T initially.
cp 0x08 ; compare with 8
jr c,CO_TEMP_B ; forward to CO-TEMP-B with 0-7.
ld a,(hl) ; fetch temporary attribute as no change.
jr z,CO_TEMP_A ; forward to CO-TEMP-A with INK/PAPER 8
; it is either ink 9 or paper 9 (contrasting)
or b ; or with mask to make white
cpl ; make black and change other to dark
and 0x24 ; 00100100
jr z,CO_TEMP_A ; forward to CO-TEMP-A if black and
; originally light.
ld a,b ; else just use the mask (white)
;; CO-TEMP-A
CO_TEMP_A:
ld c,a ; save A in C
;; CO-TEMP-B
CO_TEMP_B:
ld a,c ; load colour to A
call CO_CHANGE ; routine CO-CHANGE addressing ATTR-T
ld a,0x07 ; put 7 in accumulator
cp d ; compare with parameter
sbc a,a ; $00 if 0-7, $FF if 8
call CO_CHANGE ; routine CO-CHANGE addressing MASK-T
; mask returned in A.
; now consider P-FLAG.
rlca ; 01110000 or 00001110
rlca ; 11100000 or 00011100
and 0x50 ; 01000000 or 00010000 (AND 01010000)
ld b,a ; transfer to mask
ld a,0x08 ; load A with 8
cp d ; compare with parameter
sbc a,a ; $FF if was 9, $00 if 0-8
; continue while addressing P-FLAG
; setting bit 4 if ink 9
; setting bit 6 if paper 9
; -----------------------
; Handle change of colour
; -----------------------
; This routine addresses a system variable ATTR_T, MASK_T or P-FLAG in HL.
; colour value in A, mask in B.
;; CO-CHANGE
CO_CHANGE:
xor (hl) ; impress bits specified
and b ; by mask
xor (hl) ; on system variable.
ldi (hl),a ; update system variable.
; address next location.
ld a,b ; put current value of mask in A
ret ; return.
; ---
; the branch was here with flash and bright
;; CO-TEMP-C
CO_TEMP_C:
sbc a,a ; set zero flag for bright.
ld a,d ; fetch original parameter 0,1 or 8
rrca ; rotate bit 0 to bit 7
ld b,0x80 ; mask for flash 10000000
jr nz,CO_TEMP_D ; forward to CO-TEMP-D if flash
rrca ; rotate bit 7 to bit 6
ld b,0x40 ; mask for bright 01000000
;; CO-TEMP-D
CO_TEMP_D:
ld c,a ; store value in C
ld a,d ; fetch parameter
cp 0x08 ; compare with 8
jr z,CO_TEMP_E ; forward to CO-TEMP-E if 8
cp 0x02 ; test if 0 or 1
jr nc,REPORT_K ; back to REPORT-K if not
; 'Invalid colour'
;; CO-TEMP-E
CO_TEMP_E:
ld a,c ; value to A
ld hl,ATTR_T ; address ATTR_T
call CO_CHANGE ; routine CO-CHANGE addressing ATTR_T
ld a,c ; fetch value
rrca ; for flash8/bright8 complete
rrca ; rotations to put set bit in
rrca ; bit 7 (flash) bit 6 (bright)
jr CO_CHANGE ; back to CO-CHANGE addressing MASK_T
; and indirect return.
; ---------------------
; Handle BORDER command
; ---------------------
; Command syntax example: BORDER 7
; This command routine sets the border to one of the eight colours.
; The colours used for the lower screen are based on this.
;; BORDER
BORDER:
call FIND_INT1 ; routine FIND-INT1
cp 0x08 ; must be in range 0 (black) to 7 (white)
jr nc,REPORT_K ; back to REPORT-K if not
; 'Invalid colour'.
out (0xFE),a ; outputting to port effects an immediate
; change.
rlca ; shift the colour to
rlca ; the paper bits setting the
rlca ; ink colour black.
bit 5,a ; is the number light coloured ?
; i.e. in the range green to white.
jr nz,BORDER_1 ; skip to BORDER-1 if so
xor 0x07 ; make the ink white.
;; BORDER-1
BORDER_1:
ld (BORDCR),a ; update BORDCR with new paper/ink
ret ; return.
; -----------------
; Get pixel address
; -----------------
;
;
;; PIXEL-ADD
PIXEL_ADD:
ld a,0xAF ; load with 175 decimal.
sub b ; subtract the y value.
jp c,REPORT_Bc ; jump forward to REPORT-Bc if greater.
; 'Integer out of range'
; the high byte is derived from Y only.
; the first 3 bits are always 010
; the next 2 bits denote in which third of the screen the byte is.
; the last 3 bits denote in which of the 8 scan lines within a third
; the byte is located. There are 24 discrete values.
ld b,a ; the line number from top of screen to B.
and a ; clear carry (already clear)
rra ; 0xxxxxxx
scf ; set carry flag
rra ; 10xxxxxx
and a ; clear carry flag
rra ; 010xxxxx
xor b
and 0xF8 ; keep the top 5 bits 11111000
xor b ; 010xxbbb
ld h,a ; transfer high byte to H.
; the low byte is derived from both X and Y.
ld a,c ; the x value 0-255.
rlca
rlca
rlca
xor b ; the y value
and 0xC7 ; apply mask 11000111
xor b ; restore unmasked bits xxyyyxxx
rlca ; rotate to xyyyxxxx
rlca ; required position. yyyxxxxx
ld l,a ; low byte to L.
; finally form the pixel position in A.
ld a,c ; x value to A
and 0x07 ; mod 8
ret ; return
; ----------------
; Point Subroutine
; ----------------
; The point subroutine is called from s-point via the scanning functions
; table.
;; POINT-SUB
POINT_SUB:
call STK_TO_BC ; routine STK-TO-BC
call PIXEL_ADD ; routine PIXEL-ADD finds address of pixel.
ld b,a ; pixel position to B, 0-7.
inc b ; increment to give rotation count 1-8.
ld a,(hl) ; fetch byte from screen.
;; POINT-LP
POINT_LP:
rlca ; rotate and loop back
djnz POINT_LP ; to POINT-LP until pixel at right.
and 0x01 ; test to give zero or one.
jp STACK_A ; jump forward to STACK-A to save result.
; -------------------
; Handle PLOT command
; -------------------
; Command Syntax example: PLOT 128,88
;
;; PLOT
PLOT:
call STK_TO_BC ; routine STK-TO-BC
call PLOT_SUB ; routine PLOT-SUB
jp TEMPS ; to TEMPS
; -------------------
; The Plot subroutine
; -------------------
; A screen byte holds 8 pixels so it is necessary to rotate a mask
; into the correct position to leave the other 7 pixels unaffected.
; However all 64 pixels in the character cell take any embedded colour
; items.
; A pixel can be reset (inverse 1), toggled (over 1), or set ( with inverse
; and over switches off). With both switches on, the byte is simply put
; back on the screen though the colours may change.
;; PLOT-SUB
PLOT_SUB:
ld (COORDS),bc ; store new x/y values in COORDS
call PIXEL_ADD ; routine PIXEL-ADD gets address in HL,
; count from left 0-7 in B.
ld b,a ; transfer count to B.
inc b ; increase 1-8.
ld a,0xFE ; 11111110 in A.
;; PLOT-LOOP
PLOT_LOOP:
rrca ; rotate mask.
djnz PLOT_LOOP ; to PLOT-LOOP until B circular rotations.
ld b,a ; load mask to B
ld a,(hl) ; fetch screen byte to A
ld c,(iy+P_FLAG-IY0) ; P_FLAG to C
bit 0,c ; is it to be OVER 1 ?
jr nz,PL_TST_IN ; forward to PL-TST-IN if so.
; was over 0
and b ; combine with mask to blank pixel.
;; PL-TST-IN
PL_TST_IN:
bit 2,c ; is it inverse 1 ?
jr nz,PLOT_END ; to PLOT-END if so.
xor b ; switch the pixel
cpl ; restore other 7 bits
;; PLOT-END
PLOT_END:
ld (hl),a ; load byte to the screen.
jp PO_ATTR ; exit to PO-ATTR to set colours for cell.
; ------------------------------
; Put two numbers in BC register
; ------------------------------
;
;
;; STK-TO-BC
STK_TO_BC:
call STK_TO_A ; routine STK-TO-A
ld b,a
push bc
call STK_TO_A ; routine STK-TO-A
ld e,c
pop bc
ld d,c
ld c,a
ret
; -----------------------
; Put stack in A register
; -----------------------
; This routine puts the last value on the calculator stack into the accumulator
; deleting the last value.
;; STK-TO-A
STK_TO_A:
call FP_TO_A ; routine FP-TO-A compresses last value into
; accumulator. e.g. PI would become 3.
; zero flag set if positive.
jp c,REPORT_Bc ; jump forward to REPORT-Bc if >= 255.5.
ld c,0x01 ; prepare a positive sign byte.
ret z ; return if FP-TO-BC indicated positive.
ld c,0xFF ; prepare negative sign byte and
ret ; return.
; --------------------
; THE 'CIRCLE' COMMAND
; --------------------
; "Goe not Thou about to Square eyther circle" -
; - John Donne, Cambridge educated theologian, 1624
;
; The CIRCLE command draws a circle as a series of straight lines.
; In some ways it can be regarded as a polygon, but the first line is drawn
; as a tangent, taking the radius as its distance from the centre.
;
; Both the CIRCLE algorithm and the ARC drawing algorithm make use of the
; 'ROTATION FORMULA' (see later). It is only necessary to work out where
; the first line will be drawn and how long it is and then the rotation
; formula takes over and calculates all other rotated points.
;
; All Spectrum circles consist of two vertical lines at each side and two
; horizontal lines at the top and bottom. The number of lines is calculated
; from the radius of the circle and is always divisible by 4. For complete
; circles it will range from 4 for a square circle to 32 for a circle of
; radius 87. The Spectrum can attempt larger circles e.g. CIRCLE 0,14,255
; but these will error as they go off-screen after four lines are drawn.
; At the opposite end, CIRCLE 128,88,1.23 will draw a circle as a perfect 3x3
; square using 4 straight lines although very small circles are just drawn as
; a dot on the screen.
;
; The first chord drawn is the vertical chord on the right of the circle.
; The starting point is at the base of this chord which is drawn upwards and
; the circle continues in an anti-clockwise direction. As noted earlier the
; x-coordinate of this point measured from the centre of the circle is the
; radius.
;
; The CIRCLE command makes extensive use of the calculator and as part of
; process of drawing a large circle, free memory is checked 1315 times.
; When drawing a large arc, free memory is checked 928 times.
; A single call to 'sin' involves 63 memory checks and so values of sine
; and cosine are pre-calculated and held in the mem locations. As a
; clever trick 'cos' is derived from 'sin' using simple arithmetic operations
; instead of the more expensive 'cos' function.
;
; Initially, the syntax has been partly checked using the class for the DRAW
; command which stacks the origin of the circle (X,Y).
;; CIRCLE
CIRCLE:
rst 0x18 ; GET-CHAR x, y.
cp 0x2C ; Is character the required comma ?
jp nz,REPORT_C ; Jump, if not, to REPORT-C
; 'Nonsense in basic'
rst 0x20 ; NEXT-CHAR advances the parsed character address.
call EXPT_1NUM ; routine EXPT-1NUM stacks radius in runtime.
call CHECK_END ; routine CHECK-END will return here in runtime
; if nothing follows the command.
; Now make the radius positive and ensure that it is in floating point form
; so that the exponent byte can be accessed for quick testing.
rst 0x28 ; ; FP-CALC x, y, r.
defb 0x2A ; ;abs x, y, r.
defb 0x3D ; ;re-stack x, y, r.
defb 0x38 ; ;end-calc x, y, r.
ld a,(hl) ; Fetch first, floating-point, exponent byte.
cp 0x81 ; Compare to one.
jr nc,C_R_GRE_1 ; Forward to C-R-GRE-1
; if circle radius is greater than one.
; The circle is no larger than a single pixel so delete the radius from the
; calculator stack and plot a point at the centre.
rst 0x28 ; ; FP-CALC x, y, r.
defb 0x02 ; ;delete x, y.
defb 0x38 ; ;end-calc x, y.
jr PLOT ; back to PLOT routine to just plot x,y.
; ---
; Continue when the circle's radius measures greater than one by forming
; the angle 2 * PI radians which is 360 degrees.
;; C-R-GRE-1
C_R_GRE_1:
rst 0x28 ; ; FP-CALC x, y, r
defb 0xA3 ; ;stk-pi/2 x, y, r, pi/2.
defb 0x38 ; ;end-calc x, y, r, pi/2.
; Change the exponent of pi/2 from $81 to $83 giving 2*PI the central angle.
; This is quicker than multiplying by four.
ld (hl),0x83 ; x, y, r, 2*PI.
; Now store this important constant in mem-5 and delete so that other
; parameters can be derived from it, by a routine shared with DRAW.
rst 0x28 ; ; FP-CALC x, y, r, 2*PI.
defb 0xC5 ; ;st-mem-5 store 2*PI in mem-5
defb 0x02 ; ;delete x, y, r.
defb 0x38 ; ;end-calc x, y, r.
; The parameters derived from mem-5 (A) and from the radius are set up in
; four of the other mem locations by the CIRCLE DRAW PARAMETERS routine which
; also returns the number of straight lines in the B register.
call CD_PRMS1 ; routine CD-PRMS1
; mem-0 ; A/No of lines (=a) unused
; mem-1 ; sin(a/2) will be moving x var
; mem-2 ; - will be moving y var
; mem-3 ; cos(a) const
; mem-4 ; sin(a) const
; mem-5 ; Angle of rotation (A) (2*PI) const
; B ; Number of straight lines.
push bc ; Preserve the number of lines in B.
; Next calculate the length of half a chord by multiplying the sine of half
; the central angle by the radius of the circle.
rst 0x28 ; ; FP-CALC x, y, r.
defb 0x31 ; ;duplicate x, y, r, r.
defb 0xE1 ; ;get-mem-1 x, y, r, r, sin(a/2).
defb 0x04 ; ;multiply x, y, r, half-chord.
defb 0x38 ; ;end-calc x, y, r, half-chord.
ld a,(hl) ; fetch exponent of the half arc to A.
cp 0x80 ; compare to a half pixel
jr nc,C_ARC_GE1 ; forward, if greater than .5, to C-ARC-GE1
; If the first line is less than .5 then 4 'lines' would be drawn on the same
; spot so tidy the calculator stack and machine stack and plot the centre.
rst 0x28 ; ; FP-CALC x, y, r, hc.
defb 0x02 ; ;delete x, y, r.
defb 0x02 ; ;delete x, y.
defb 0x38 ; ;end-calc x, y.
pop bc ; Balance machine stack by taking chord-count.
jp PLOT ; JUMP to PLOT
; ---
; The arc is greater than 0.5 so the circle can be drawn.
;; C-ARC-GE1
C_ARC_GE1:
rst 0x28 ; ; FP-CALC x, y, r, hc.
defb 0xC2 ; ;st-mem-2 x, y, r, half chord to mem-2.
defb 0x01 ; ;exchange x, y, hc, r.
defb 0xC0 ; ;st-mem-0 x, y, hc, r.
defb 0x02 ; ;delete x, y, hc.
; Subtract the length of the half-chord from the absolute y coordinate to
; give the starting y coordinate sy.
; Note that for a circle this is also the end coordinate.
defb 0x03 ; ;subtract x, y-hc. (The start y-coord)
defb 0x01 ; ;exchange sy, x.
; Next simply add the radius to the x coordinate to give a fuzzy x-coordinate.
; Strictly speaking, the radius should be multiplied by cos(a/2) first but
; doing it this way makes the circle slightly larger.
defb 0xE0 ; ;get-mem-0 sy, x, r.
defb 0x0F ; ;addition sy, x+r. (The start x-coord)
; We now want three copies of this pair of values on the calculator stack.
; The first pair remain on the stack throughout the circle routine and are
; the end points. The next pair will be the moving absolute values of x and y
; that are updated after each line is drawn. The final pair will be loaded
; into the COORDS system variable so that the first vertical line starts at
; the right place.
defb 0xC0 ; ;st-mem-0 sy, sx.
defb 0x01 ; ;exchange sx, sy.
defb 0x31 ; ;duplicate sx, sy, sy.
defb 0xE0 ; ;get-mem-0 sx, sy, sy, sx.
defb 0x01 ; ;exchange sx, sy, sx, sy.
defb 0x31 ; ;duplicate sx, sy, sx, sy, sy.
defb 0xE0 ; ;get-mem-0 sx, sy, sx, sy, sy, sx.
; Locations mem-1 and mem-2 are the relative x and y values which are updated
; after each line is drawn. Since we are drawing a vertical line then the rx
; value in mem-1 is zero and the ry value in mem-2 is the full chord.
defb 0xA0 ; ;stk-zero sx, sy, sx, sy, sy, sx, 0.
defb 0xC1 ; ;st-mem-1 sx, sy, sx, sy, sy, sx, 0.
defb 0x02 ; ;delete sx, sy, sx, sy, sy, sx.
; Although the three pairs of x/y values are the same for a circle, they
; will be labelled terminating, absolute and start coordinates.
defb 0x38 ; ;end-calc tx, ty, ax, ay, sy, sx.
; Use the exponent manipulating trick again to double the value of mem-2.
inc (iy+0x62) ; Increment MEM-2-1st doubling half chord.
; Note. this first vertical chord is drawn at the radius so circles are
; slightly displaced to the right.
; It is only necessary to place the values (sx) and (sy) in the system
; variable COORDS to ensure that drawing commences at the correct pixel.
; Note. a couple of LD (COORDS),A instructions would have been quicker, and
; simpler, than using LD (COORDS),HL.
call FIND_INT1 ; routine FIND-INT1 fetches sx from stack to A.
ld l,a ; place X value in L.
push hl ; save the holding register.
call FIND_INT1 ; routine FIND-INT1 fetches sy to A
pop hl ; restore the holding register.
ld h,a ; and place y value in high byte.
ld (COORDS),hl ; Update the COORDS system variable.
; tx, ty, ax, ay.
pop bc ; restore the chord count
; values 4,8,12,16,20,24,28 or 32.
jp DRW_STEPS ; forward to DRW-STEPS
; tx, ty, ax, ay.
; Note. the jump to DRW-STEPS is just to decrement B and jump into the
; middle of the arc-drawing loop. The arc count which includes the first
; vertical arc draws one less than the perceived number of arcs.
; The final arc offsets are obtained by subtracting the final COORDS value
; from the initial sx and sy values which are kept at the base of the
; calculator stack throughout the arc loop.
; This ensures that the final line finishes exactly at the starting pixel
; removing the possibility of any inaccuracy.
; Since the initial sx and sy values are not required until the final arc
; is drawn, they are not shown until then.
; As the calculator stack is quite busy, only the active parts are shown in
; each section.
; ------------------
; THE 'DRAW' COMMAND
; ------------------
; The Spectrum's DRAW command is overloaded and can take two parameters sets.
;
; With two parameters, it simply draws an approximation to a straight line
; at offset x,y using the LINE-DRAW routine.
;
; With three parameters, an arc is drawn to the point at offset x,y turning
; through an angle, in radians, supplied by the third parameter.
; The arc will consist of 4 to 252 straight lines each one of which is drawn
; by calls to the DRAW-LINE routine.
;; DRAW
DRAW:
rst 0x18 ; GET-CHAR
cp 0x2C ; is it the comma character ?
jr z,DR_3_PRMS ; forward, if so, to DR-3-PRMS
; There are two parameters e.g. DRAW 255,175
call CHECK_END ; routine CHECK-END
jp LINE_DRAW ; jump forward to LINE-DRAW
; ---
; There are three parameters e.g. DRAW 255, 175, .5
; The first two are relative coordinates and the third is the angle of
; rotation in radians (A).
;; DR-3-PRMS
DR_3_PRMS:
rst 0x20 ; NEXT-CHAR skips over the 'comma'.
call EXPT_1NUM ; routine EXPT-1NUM stacks the rotation angle.
call CHECK_END ; routine CHECK-END
; Now enter the calculator and store the complete rotation angle in mem-5
rst 0x28 ; ; FP-CALC x, y, A.
defb 0xC5 ; ;st-mem-5 x, y, A.
; Test the angle for the special case of 360 degrees.
defb 0xA2 ; ;stk-half x, y, A, 1/2.
defb 0x04 ; ;multiply x, y, A/2.
defb 0x1F ; ;sin x, y, sin(A/2).
defb 0x31 ; ;duplicate x, y, sin(A/2),sin(A/2)
defb 0x30 ; ;not x, y, sin(A/2), (0/1).
defb 0x30 ; ;not x, y, sin(A/2), (1/0).
defb 0x00 ; ;jump-true x, y, sin(A/2).
defb 0x06 ; ;forward to L23A3, DR-SIN-NZ
; if sin(r/2) is not zero.
; The third parameter is 2*PI (or a multiple of 2*PI) so a 360 degrees turn
; would just be a straight line. Eliminating this case here prevents
; division by zero at later stage.
defb 0x02 ; ;delete x, y.
defb 0x38 ; ;end-calc x, y.
jp LINE_DRAW ; forward to LINE-DRAW
; ---
; An arc can be drawn.
;; DR-SIN-NZ
DR_SIN_NZ:
defb 0xC0 ; ;st-mem-0 x, y, sin(A/2). store mem-0
defb 0x02 ; ;delete x, y.
; The next step calculates (roughly) the diameter of the circle of which the
; arc will form part. This value does not have to be too accurate as it is
; only used to evaluate the number of straight lines and then discarded.
; After all for a circle, the radius is used. Consequently, a circle of
; radius 50 will have 24 straight lines but an arc of radius 50 will have 20
; straight lines - when drawn in any direction.
; So that simple arithmetic can be used, the length of the chord can be
; calculated as X+Y rather than by Pythagoras Theorem and the sine of the
; nearest angle within reach is used.
defb 0xC1 ; ;st-mem-1 x, y. store mem-1
defb 0x02 ; ;delete x.
defb 0x31 ; ;duplicate x, x.
defb 0x2A ; ;abs x, x (+ve).
defb 0xE1 ; ;get-mem-1 x, X, y.
defb 0x01 ; ;exchange x, y, X.
defb 0xE1 ; ;get-mem-1 x, y, X, y.
defb 0x2A ; ;abs x, y, X, Y (+ve).
defb 0x0F ; ;addition x, y, X+Y.
defb 0xE0 ; ;get-mem-0 x, y, X+Y, sin(A/2).
defb 0x05 ; ;division x, y, X+Y/sin(A/2).
defb 0x2A ; ;abs x, y, X+Y/sin(A/2) = D.
; Bring back sin(A/2) from mem-0 which will shortly get trashed.
; Then bring D to the top of the stack again.
defb 0xE0 ; ;get-mem-0 x, y, D, sin(A/2).
defb 0x01 ; ;exchange x, y, sin(A/2), D.
; Note. that since the value at the top of the stack has arisen as a result
; of division then it can no longer be in integer form and the next re-stack
; is unnecessary. Only the Sinclair ZX80 had integer division.
defb 0x3D ; ;re-stack (unnecessary)
defb 0x38 ; ;end-calc x, y, sin(A/2), D.
; The next test avoids drawing 4 straight lines when the start and end pixels
; are adjacent (or the same) but is probably best dispensed with.
ld a,(hl) ; fetch exponent byte of D.
cp 0x81 ; compare to 1
jr nc,DR_PRMS ; forward, if > 1, to DR-PRMS
; else delete the top two stack values and draw a simple straight line.
rst 0x28 ; ; FP-CALC
defb 0x02 ; ;delete
defb 0x02 ; ;delete
defb 0x38 ; ;end-calc x, y.
jp LINE_DRAW ; to LINE-DRAW
; ---
; The ARC will consist of multiple straight lines so call the CIRCLE-DRAW
; PARAMETERS ROUTINE to pre-calculate sine values from the angle (in mem-5)
; and determine also the number of straight lines from that value and the
; 'diameter' which is at the top of the calculator stack.
;; DR-PRMS
DR_PRMS:
call CD_PRMS1 ; routine CD-PRMS1
; mem-0 ; (A)/No. of lines (=a) (step angle)
; mem-1 ; sin(a/2)
; mem-2 ; -
; mem-3 ; cos(a) const
; mem-4 ; sin(a) const
; mem-5 ; Angle of rotation (A) in
; B ; Count of straight lines - max 252.
push bc ; Save the line count on the machine stack.
; Remove the now redundant diameter value D.
rst 0x28 ; ; FP-CALC x, y, sin(A/2), D.
defb 0x02 ; ;delete x, y, sin(A/2).
; Dividing the sine of the step angle by the sine of the total angle gives
; the length of the initial chord on a unary circle. This factor f is used
; to scale the coordinates of the first line which still points in the
; direction of the end point and may be larger.
defb 0xE1 ; ;get-mem-1 x, y, sin(A/2), sin(a/2)
defb 0x01 ; ;exchange x, y, sin(a/2), sin(A/2)
defb 0x05 ; ;division x, y, sin(a/2)/sin(A/2)
defb 0xC1 ; ;st-mem-1 x, y. f.
defb 0x02 ; ;delete x, y.
; With the factor stored, scale the x coordinate first.
defb 0x01 ; ;exchange y, x.
defb 0x31 ; ;duplicate y, x, x.
defb 0xE1 ; ;get-mem-1 y, x, x, f.
defb 0x04 ; ;multiply y, x, x*f (=xx)
defb 0xC2 ; ;st-mem-2 y, x, xx.
defb 0x02 ; ;delete y. x.
; Now scale the y coordinate.
defb 0x01 ; ;exchange x, y.
defb 0x31 ; ;duplicate x, y, y.
defb 0xE1 ; ;get-mem-1 x, y, y, f
defb 0x04 ; ;multiply x, y, y*f (=yy)
; Note. 'sin' and 'cos' trash locations mem-0 to mem-2 so fetch mem-2 to the
; calculator stack for safe keeping.
defb 0xE2 ; ;get-mem-2 x, y, yy, xx.
; Once we get the coordinates of the first straight line then the 'ROTATION
; FORMULA' used in the arc loop will take care of all other points, but we
; now use a variation of that formula to rotate the first arc through (A-a)/2
; radians.
;
; xRotated = y * sin(angle) + x * cos(angle)
; yRotated = y * cos(angle) - x * sin(angle)
;
defb 0xE5 ; ;get-mem-5 x, y, yy, xx, A.
defb 0xE0 ; ;get-mem-0 x, y, yy, xx, A, a.
defb 0x03 ; ;subtract x, y, yy, xx, A-a.
defb 0xA2 ; ;stk-half x, y, yy, xx, A-a, 1/2.
defb 0x04 ; ;multiply x, y, yy, xx, (A-a)/2. (=angle)
defb 0x31 ; ;duplicate x, y, yy, xx, angle, angle.
defb 0x1F ; ;sin x, y, yy, xx, angle, sin(angle)
defb 0xC5 ; ;st-mem-5 x, y, yy, xx, angle, sin(angle)
defb 0x02 ; ;delete x, y, yy, xx, angle
defb 0x20 ; ;cos x, y, yy, xx, cos(angle).
; Note. mem-0, mem-1 and mem-2 can be used again now...
defb 0xC0 ; ;st-mem-0 x, y, yy, xx, cos(angle).
defb 0x02 ; ;delete x, y, yy, xx.
defb 0xC2 ; ;st-mem-2 x, y, yy, xx.
defb 0x02 ; ;delete x, y, yy.
defb 0xC1 ; ;st-mem-1 x, y, yy.
defb 0xE5 ; ;get-mem-5 x, y, yy, sin(angle)
defb 0x04 ; ;multiply x, y, yy*sin(angle).
defb 0xE0 ; ;get-mem-0 x, y, yy*sin(angle), cos(angle)
defb 0xE2 ; ;get-mem-2 x, y, yy*sin(angle), cos(angle), xx.
defb 0x04 ; ;multiply x, y, yy*sin(angle), xx*cos(angle).
defb 0x0F ; ;addition x, y, xRotated.
defb 0xE1 ; ;get-mem-1 x, y, xRotated, yy.
defb 0x01 ; ;exchange x, y, yy, xRotated.
defb 0xC1 ; ;st-mem-1 x, y, yy, xRotated.
defb 0x02 ; ;delete x, y, yy.
defb 0xE0 ; ;get-mem-0 x, y, yy, cos(angle).
defb 0x04 ; ;multiply x, y, yy*cos(angle).
defb 0xE2 ; ;get-mem-2 x, y, yy*cos(angle), xx.
defb 0xE5 ; ;get-mem-5 x, y, yy*cos(angle), xx, sin(angle).
defb 0x04 ; ;multiply x, y, yy*cos(angle), xx*sin(angle).
defb 0x03 ; ;subtract x, y, yRotated.
defb 0xC2 ; ;st-mem-2 x, y, yRotated.
; Now the initial x and y coordinates are made positive and summed to see
; if they measure up to anything significant.
defb 0x2A ; ;abs x, y, yRotated'.
defb 0xE1 ; ;get-mem-1 x, y, yRotated', xRotated.
defb 0x2A ; ;abs x, y, yRotated', xRotated'.
defb 0x0F ; ;addition x, y, yRotated+xRotated.
defb 0x02 ; ;delete x, y.
defb 0x38 ; ;end-calc x, y.
; Although the test value has been deleted it is still above the calculator
; stack in memory and conveniently DE which points to the first free byte
; addresses the exponent of the test value.
ld a,(de) ; Fetch exponent of the length indicator.
cp 0x81 ; Compare to that for 1
pop bc ; Balance the machine stack
jp c,LINE_DRAW ; forward, if the coordinates of first line
; don't add up to more than 1, to LINE-DRAW
; Continue when the arc will have a discernable shape.
push bc ; Restore line counter to the machine stack.
; The parameters of the DRAW command were relative and they are now converted
; to absolute coordinates by adding to the coordinates of the last point
; plotted. The first two values on the stack are the terminal tx and ty
; coordinates. The x-coordinate is converted first but first the last point
; plotted is saved as it will initialize the moving ax, value.
rst 0x28 ; ; FP-CALC x, y.
defb 0x01 ; ;exchange y, x.
defb 0x38 ; ;end-calc y, x.
ld a,(COORDS) ; Fetch System Variable COORDS-x
call STACK_A ; routine STACK-A
rst 0x28 ; ; FP-CALC y, x, last-x.
; Store the last point plotted to initialize the moving ax value.
defb 0xC0 ; ;st-mem-0 y, x, last-x.
defb 0x0F ; ;addition y, absolute x.
defb 0x01 ; ;exchange tx, y.
defb 0x38 ; ;end-calc tx, y.
ld a,(COORDS_hi) ; Fetch System Variable COORDS-y
call STACK_A ; routine STACK-A
rst 0x28 ; ; FP-CALC tx, y, last-y.
; Store the last point plotted to initialize the moving ay value.
defb 0xC5 ; ;st-mem-5 tx, y, last-y.
defb 0x0F ; ;addition tx, ty.
; Fetch the moving ax and ay to the calculator stack.
defb 0xE0 ; ;get-mem-0 tx, ty, ax.
defb 0xE5 ; ;get-mem-5 tx, ty, ax, ay.
defb 0x38 ; ;end-calc tx, ty, ax, ay.
pop bc ; Restore the straight line count.
; -----------------------------------
; THE 'CIRCLE/DRAW CONVERGENCE POINT'
; -----------------------------------
; The CIRCLE and ARC-DRAW commands converge here.
;
; Note. for both the CIRCLE and ARC commands the minimum initial line count
; is 4 (as set up by the CD_PARAMS routine) and so the zero flag will never
; be set and the loop is always entered. The first test is superfluous and
; the jump will always be made to ARC-START.
;; DRW-STEPS
DRW_STEPS:
dec b ; decrement the arc count (4,8,12,16...).
jr z,ARC_END ; forward, if zero (not possible), to ARC-END
jr ARC_START ; forward to ARC-START
; --------------
; THE 'ARC LOOP'
; --------------
;
; The arc drawing loop will draw up to 31 straight lines for a circle and up
; 251 straight lines for an arc between two points. In both cases the final
; closing straight line is drawn at ARC_END, but it otherwise loops back to
; here to calculate the next coordinate using the ROTATION FORMULA where (a)
; is the previously calculated, constant CENTRAL ANGLE of the arcs.
;
; Xrotated = x * cos(a) - y * sin(a)
; Yrotated = x * sin(a) + y * cos(a)
;
; The values cos(a) and sin(a) are pre-calculated and held in mem-3 and mem-4
; for the duration of the routine.
; Memory location mem-1 holds the last relative x value (rx) and mem-2 holds
; the last relative y value (ry) used by DRAW.
;
; Note. that this is a very clever twist on what is after all a very clever,
; well-used formula. Normally the rotation formula is used with the x and y
; coordinates from the centre of the circle (or arc) and a supplied angle to
; produce two new x and y coordinates in an anticlockwise direction on the
; circumference of the circle.
; What is being used here, instead, is the relative X and Y parameters from
; the last point plotted that are required to get to the current point and
; the formula returns the next relative coordinates to use.
;; ARC-LOOP
ARC_LOOP:
rst 0x28 ; ; FP-CALC
defb 0xE1 ; ;get-mem-1 rx.
defb 0x31 ; ;duplicate rx, rx.
defb 0xE3 ; ;get-mem-3 cos(a)
defb 0x04 ; ;multiply rx, rx*cos(a).
defb 0xE2 ; ;get-mem-2 rx, rx*cos(a), ry.
defb 0xE4 ; ;get-mem-4 rx, rx*cos(a), ry, sin(a).
defb 0x04 ; ;multiply rx, rx*cos(a), ry*sin(a).
defb 0x03 ; ;subtract rx, rx*cos(a) - ry*sin(a)
defb 0xC1 ; ;st-mem-1 rx, new relative x rotated.
defb 0x02 ; ;delete rx.
defb 0xE4 ; ;get-mem-4 rx, sin(a).
defb 0x04 ; ;multiply rx*sin(a)
defb 0xE2 ; ;get-mem-2 rx*sin(a), ry.
defb 0xE3 ; ;get-mem-3 rx*sin(a), ry, cos(a).
defb 0x04 ; ;multiply rx*sin(a), ry*cos(a).
defb 0x0F ; ;addition rx*sin(a) + ry*cos(a).
defb 0xC2 ; ;st-mem-2 new relative y rotated.
defb 0x02 ; ;delete .
defb 0x38 ; ;end-calc .
; Note. the calculator stack actually holds tx, ty, ax, ay
; and the last absolute values of x and y
; are now brought into play.
;
; Magically, the two new rotated coordinates rx and ry are all that we would
; require to draw a circle or arc - on paper!
; The Spectrum DRAW routine draws to the rounded x and y coordinate and so
; repetitions of values like 3.49 would mean that the fractional parts
; would be lost until eventually the draw coordinates might differ from the
; floating point values used above by several pixels.
; For this reason the accurate offsets calculated above are added to the
; accurate, absolute coordinates maintained in ax and ay and these new
; coordinates have the integer coordinates of the last plot position
; ( from System Variable COORDS ) subtracted from them to give the relative
; coordinates required by the DRAW routine.
; The mid entry point.
;; ARC-START
ARC_START:
push bc ; Preserve the arc counter on the machine stack.
; Store the absolute ay in temporary variable mem-0 for the moment.
rst 0x28 ; ; FP-CALC ax, ay.
defb 0xC0 ; ;st-mem-0 ax, ay.
defb 0x02 ; ;delete ax.
; Now add the fractional relative x coordinate to the fractional absolute
; x coordinate to obtain a new fractional x-coordinate.
defb 0xE1 ; ;get-mem-1 ax, xr.
defb 0x0F ; ;addition ax+xr (= new ax).
defb 0x31 ; ;duplicate ax, ax.
defb 0x38 ; ;end-calc ax, ax.
ld a,(COORDS) ; COORDS-x last x (integer ix 0-255)
call STACK_A ; routine STACK-A
rst 0x28 ; ; FP-CALC ax, ax, ix.
defb 0x03 ; ;subtract ax, ax-ix = relative DRAW Dx.
; Having calculated the x value for DRAW do the same for the y value.
defb 0xE0 ; ;get-mem-0 ax, Dx, ay.
defb 0xE2 ; ;get-mem-2 ax, Dx, ay, ry.
defb 0x0F ; ;addition ax, Dx, ay+ry (= new ay).
defb 0xC0 ; ;st-mem-0 ax, Dx, ay.
defb 0x01 ; ;exchange ax, ay, Dx,
defb 0xE0 ; ;get-mem-0 ax, ay, Dx, ay.
defb 0x38 ; ;end-calc ax, ay, Dx, ay.
ld a,(COORDS_hi) ; COORDS-y last y (integer iy 0-175)
call STACK_A ; routine STACK-A
rst 0x28 ; ; FP-CALC ax, ay, Dx, ay, iy.
defb 0x03 ; ;subtract ax, ay, Dx, ay-iy ( = Dy).
defb 0x38 ; ;end-calc ax, ay, Dx, Dy.
call DRAW_LINE ; Routine DRAW-LINE draws (Dx,Dy) relative to
; the last pixel plotted leaving absolute x
; and y on the calculator stack.
; ax, ay.
pop bc ; Restore the arc counter from the machine stack.
djnz ARC_LOOP ; Decrement and loop while > 0 to ARC-LOOP
; -------------
; THE 'ARC END'
; -------------
; To recap the full calculator stack is tx, ty, ax, ay.
; Just as one would do if drawing the curve on paper, the final line would
; be drawn by joining the last point plotted to the initial start point
; in the case of a CIRCLE or to the calculated end point in the case of
; an ARC.
; The moving absolute values of x and y are no longer required and they
; can be deleted to expose the closing coordinates.
;; ARC-END
ARC_END:
rst 0x28 ; ; FP-CALC tx, ty, ax, ay.
defb 0x02 ; ;delete tx, ty, ax.
defb 0x02 ; ;delete tx, ty.
defb 0x01 ; ;exchange ty, tx.
defb 0x38 ; ;end-calc ty, tx.
; First calculate the relative x coordinate to the end-point.
ld a,(COORDS) ; COORDS-x
call STACK_A ; routine STACK-A
rst 0x28 ; ; FP-CALC ty, tx, coords_x.
defb 0x03 ; ;subtract ty, rx.
; Next calculate the relative y coordinate to the end-point.
defb 0x01 ; ;exchange rx, ty.
defb 0x38 ; ;end-calc rx, ty.
ld a,(COORDS_hi) ; COORDS-y
call STACK_A ; routine STACK-A
rst 0x28 ; ; FP-CALC rx, ty, coords_y
defb 0x03 ; ;subtract rx, ry.
defb 0x38 ; ;end-calc rx, ry.
; Finally draw the last straight line.
;; LINE-DRAW
LINE_DRAW:
call DRAW_LINE ; routine DRAW-LINE draws to the relative
; coordinates (rx, ry).
jp TEMPS ; jump back and exit via TEMPS >>>
; --------------------------------------------
; THE 'INITIAL CIRCLE/DRAW PARAMETERS' ROUTINE
; --------------------------------------------
; Begin by calculating the number of chords which will be returned in B.
; A rule of thumb is employed that uses a value z which for a circle is the
; radius and for an arc is the diameter with, as it happens, a pinch more if
; the arc is on a slope.
;
; NUMBER OF STRAIGHT LINES = ANGLE OF ROTATION * SQUARE ROOT ( Z ) / 2
;; CD-PRMS1
CD_PRMS1:
rst 0x28 ; ; FP-CALC z.
defb 0x31 ; ;duplicate z, z.
defb 0x28 ; ;sqr z, sqr(z).
defb 0x34 ; ;stk-data z, sqr(z), 2.
defb 0x32 ; ;Exponent: $82, Bytes: 1
defb 0x00 ; ;(+00,+00,+00)
defb 0x01 ; ;exchange z, 2, sqr(z).
defb 0x05 ; ;division z, 2/sqr(z).
defb 0xE5 ; ;get-mem-5 z, 2/sqr(z), ANGLE.
defb 0x01 ; ;exchange z, ANGLE, 2/sqr (z)
defb 0x05 ; ;division z, ANGLE*sqr(z)/2 (= No. of lines)
defb 0x2A ; ;abs (for arc only)
defb 0x38 ; ;end-calc z, number of lines.
; As an example for a circle of radius 87 the number of lines will be 29.
call FP_TO_A ; routine FP-TO-A
; The value is compressed into A register, no carry with valid circle.
jr c,USE_252 ; forward, if over 256, to USE-252
; now make a multiple of 4 e.g. 29 becomes 28
and 0xFC ; AND 252
; Adding 4 could set carry for arc, for the circle example, 28 becomes 32.
add a,0x04 ; adding 4 could set carry if result is 256.
jr nc,DRAW_SAVE ; forward if less than 256 to DRAW-SAVE
; For an arc, a limit of 252 is imposed.
;; USE-252
USE_252:
ld a,0xFC ; Use a value of 252 (for arc).
; For both arcs and circles, constants derived from the central angle are
; stored in the 'mem' locations. Some are not relevant for the circle.
;; DRAW-SAVE
DRAW_SAVE:
push af ; Save the line count (A) on the machine stack.
call STACK_A ; Routine STACK-A stacks the modified count(A).
rst 0x28 ; ; FP-CALC z, A.
defb 0xE5 ; ;get-mem-5 z, A, ANGLE.
defb 0x01 ; ;exchange z, ANGLE, A.
defb 0x05 ; ;division z, ANGLE/A. (Angle/count = a)
defb 0x31 ; ;duplicate z, a, a.
; Note. that cos (a) could be formed here directly using 'cos' and stored in
; mem-3 but that would spoil a good story and be slightly slower, as also
; would using square roots to form cos (a) from sin (a).
defb 0x1F ; ;sin z, a, sin(a)
defb 0xC4 ; ;st-mem-4 z, a, sin(a)
defb 0x02 ; ;delete z, a.
defb 0x31 ; ;duplicate z, a, a.
defb 0xA2 ; ;stk-half z, a, a, 1/2.
defb 0x04 ; ;multiply z, a, a/2.
defb 0x1F ; ;sin z, a, sin(a/2).
; Note. after second sin, mem-0 and mem-1 become free.
defb 0xC1 ; ;st-mem-1 z, a, sin(a/2).
defb 0x01 ; ;exchange z, sin(a/2), a.
defb 0xC0 ; ;st-mem-0 z, sin(a/2), a. (for arc only)
; Now form cos(a) from sin(a/2) using the 'DOUBLE ANGLE FORMULA'.
defb 0x02 ; ;delete z, sin(a/2).
defb 0x31 ; ;duplicate z, sin(a/2), sin(a/2).
defb 0x04 ; ;multiply z, sin(a/2)*sin(a/2).
defb 0x31 ; ;duplicate z, sin(a/2)*sin(a/2),
; ; sin(a/2)*sin(a/2).
defb 0x0F ; ;addition z, 2*sin(a/2)*sin(a/2).
defb 0xA1 ; ;stk-one z, 2*sin(a/2)*sin(a/2), 1.
defb 0x03 ; ;subtract z, 2*sin(a/2)*sin(a/2)-1.
defb 0x1B ; ;negate z, 1-2*sin(a/2)*sin(a/2).
defb 0xC3 ; ;st-mem-3 z, cos(a).
defb 0x02 ; ;delete z.
defb 0x38 ; ;end-calc z.
; The radius/diameter is left on the calculator stack.
pop bc ; Restore the line count to the B register.
ret ; Return.
; --------------------------
; THE 'DOUBLE ANGLE FORMULA'
; --------------------------
; This formula forms cos(a) from sin(a/2) using simple arithmetic.
;
; THE GEOMETRIC PROOF OF FORMULA cos (a) = 1 - 2 * sin(a/2) * sin(a/2)
;
;
; A
;
; . /|\
; . / | \
; . / | \
; . / |a/2\
; . / | \
; . 1 / | \
; . / | \
; . / | \
; . / | \
; . a/2 D / a E|-+ \
; B ---------------------/----------+-+--------\ C
; <- 1 -><- 1 ->
;
; cos a = 1 - 2 * sin(a/2) * sin(a/2)
;
; The figure shows a right triangle that inscribes a circle of radius 1 with
; centre, or origin, D. Line BC is the diameter of length 2 and A is a point
; on the circle. The periphery angle BAC is therefore a right angle by the
; Rule of Thales.
; Line AC is a chord touching two points on the circle and the angle at the
; centre is (a).
; Since the vertex of the largest triangle B touches the circle, the
; inscribed angle (a/2) is half the central angle (a).
; The cosine of (a) is the length DE as the hypotenuse is of length 1.
; This can also be expressed as 1-length CE. Examining the triangle at the
; right, the top angle is also (a/2) as angle BAE and EBA add to give a right
; angle as do BAE and EAC.
; So cos (a) = 1 - AC * sin(a/2)
; Looking at the largest triangle, side AC can be expressed as
; AC = 2 * sin(a/2) and so combining these we get
; cos (a) = 1 - 2 * sin(a/2) * sin(a/2).
;
; "I will be sufficiently rewarded if when telling it to others, you will
; not claim the discovery as your own, but will say it is mine."
; - Thales, 640 - 546 B.C.
;
; --------------------------
; THE 'LINE DRAWING' ROUTINE
; --------------------------
;
;
;; DRAW-LINE
DRAW_LINE:
call STK_TO_BC ; routine STK-TO-BC
ld a,c
cp b
jr nc,DL_X_GE_Y ; to DL-X-GE-Y
ld l,c
push de
xor a
ld e,a
jr DL_LARGER ; to DL-LARGER
; ---
;; DL-X-GE-Y
DL_X_GE_Y:
or c
ret z
ld l,b
ld b,c
push de
ld d,0x00
;; DL-LARGER
DL_LARGER:
ld h,b
ld a,b
rra
;; D-L-LOOP
D_L_LOOP:
add a,l
jr c,D_L_DIAG ; to D-L-DIAG
cp h
jr c,D_L_HR_VT ; to D-L-HR-VT
;; D-L-DIAG
D_L_DIAG:
sub h
ld c,a
exx
pop bc
push bc
jr D_L_STEP ; to D-L-STEP
; ---
;; D-L-HR-VT
D_L_HR_VT:
ld c,a
push de
exx
pop bc
;; D-L-STEP
D_L_STEP:
ld hl,(COORDS) ; COORDS
ld a,b
add a,h
ld b,a
ld a,c
inc a
add a,l
jr c,D_L_RANGE ; to D-L-RANGE
jr z,REPORT_Bc ; to REPORT-Bc
;; D-L-PLOT
D_L_PLOT:
dec a
ld c,a
call PLOT_SUB ; routine PLOT-SUB
exx
ld a,c
djnz D_L_LOOP ; to D-L-LOOP
pop de
ret
; ---
;; D-L-RANGE
D_L_RANGE:
jr z,D_L_PLOT ; to D-L-PLOT
;; REPORT-Bc
REPORT_Bc:
rst 0x08 ; ERROR-1
defb 0x0A ; Error Report: Integer out of range
;***********************************
;** Part 8. EXPRESSION EVALUATION **
;***********************************
;
; It is a this stage of the ROM that the Spectrum ceases altogether to be
; just a colourful novelty. One remarkable feature is that in all previous
; commands when the Spectrum is expecting a number or a string then an
; expression of the same type can be substituted ad infinitum.
; This is the routine that evaluates that expression.
; This is what causes 2 + 2 to give the answer 4.
; That is quite easy to understand. However you don't have to make it much
; more complex to start a remarkable juggling act.
; e.g. PRINT 2 * (VAL "2+2" + TAN 3)
; In fact, provided there is enough free RAM, the Spectrum can evaluate
; an expression of unlimited complexity.
; Apart from a couple of minor glitches, which you can now correct, the
; system is remarkably robust.
; ---------------------------------
; Scan expression or sub-expression
; ---------------------------------
;
;
;; SCANNING
SCANNING:
rst 0x18 ; GET-CHAR
ld b,0x00 ; priority marker zero is pushed on stack
; to signify end of expression when it is
; popped off again.
push bc ; put in on stack.
; and proceed to consider the first character
; of the expression.
;; S-LOOP-1
S_LOOP_1:
ld c,a ; store the character while a look up is done.
ld hl,scan_func ; Address: scan-func
call INDEXER ; routine INDEXER is called to see if it is
; part of a limited range '+', '(', 'ATTR' etc.
ld a,c ; fetch the character back
jp nc,S_ALPHNUM ; jump forward to S-ALPHNUM if not in primary
; operators and functions to consider in the
; first instance a digit or a variable and
; then anything else. >>>
ld b,0x00 ; but here if it was found in table so
ld c,(hl) ; fetch offset from table and make B zero.
add hl,bc ; add the offset to position found
jp (hl) ; and jump to the routine e.g. S-BIN
; making an indirect exit from there.
; -------------------------------------------------------------------------
; The four service subroutines for routines in the scanning function table
; -------------------------------------------------------------------------
; PRINT """Hooray!"" he cried."
;; S-QUOTE-S
S_QUOTE_S:
call CH_ADD_1 ; routine CH-ADD+1 points to next character
; and fetches that character.
inc bc ; increase length counter.
cp 0x0D ; is it carriage return ?
; inside a quote.
jp z,REPORT_C ; jump back to REPORT-C if so.
; 'Nonsense in BASIC'.
cp 0x22 ; is it a quote '"' ?
jr nz,S_QUOTE_S ; back to S-QUOTE-S if not for more.
call CH_ADD_1 ; routine CH-ADD+1
cp 0x22 ; compare with possible adjacent quote
ret ; return. with zero set if two together.
; ---
; This subroutine is used to get two coordinate expressions for the three
; functions SCREEN$, ATTR and POINT that have two fixed parameters and
; therefore require surrounding braces.
;; S-2-COORD
S_2_COORD:
rst 0x20 ; NEXT-CHAR
cp 0x28 ; is it the opening '(' ?
jr nz,S_RPORT_C ; forward to S-RPORT-C if not
; 'Nonsense in BASIC'.
call NEXT_2NUM ; routine NEXT-2NUM gets two comma-separated
; numeric expressions. Note. this could cause
; many more recursive calls to SCANNING but
; the parent function will be evaluated fully
; before rejoining the main juggling act.
rst 0x18 ; GET-CHAR
cp 0x29 ; is it the closing ')' ?
;; S-RPORT-C
S_RPORT_C:
jp nz,REPORT_C ; jump back to REPORT-C if not.
; 'Nonsense in BASIC'.
; ------------
; Check syntax
; ------------
; This routine is called on a number of occasions to check if syntax is being
; checked or if the program is being run. To test the flag inline would use
; four bytes of code, but a call instruction only uses 3 bytes of code.
;; SYNTAX-Z
SYNTAX_Z:
bit 7,(iy+FLAGS-IY0) ; test FLAGS - checking syntax only ?
ret ; return.
; ----------------
; Scanning SCREEN$
; ----------------
; This function returns the code of a bit-mapped character at screen
; position at line C, column B. It is unable to detect the mosaic characters
; which are not bit-mapped but detects the ASCII 32 - 127 range.
; The bit-mapped UDGs are ignored which is curious as it requires only a
; few extra bytes of code. As usual, anything to do with CHARS is weird.
; If no match is found a null string is returned.
; No actual check on ranges is performed - that's up to the BASIC programmer.
; No real harm can come from SCREEN$(255,255) although the BASIC manual
; says that invalid values will be trapped.
; Interestingly, in the Pitman pocket guide, 1984, Vickers says that the
; range checking will be performed.
;; S-SCRN$-S
S_SCRN__S:
call STK_TO_BC ; routine STK-TO-BC.
ld hl,(CHARS) ; fetch address of CHARS.
ld de,0x0100 ; fetch offset to chr$ 32
add hl,de ; and find start of bitmaps.
; Note. not inc h. ??
ld a,c ; transfer line to A.
rrca ; multiply
rrca ; by
rrca ; thirty-two.
and 0xE0 ; and with 11100000
xor b ; combine with column $00 - $1F
ld e,a ; to give the low byte of top line
ld a,c ; column to A range 00000000 to 00011111
and 0x18 ; and with 00011000
xor 0x40 ; xor with 01000000 (high byte screen start)
ld d,a ; register DE now holds start address of cell.
ld b,0x60 ; there are 96 characters in ASCII set.
;; S-SCRN-LP
S_SCRN_LP:
push bc ; save count
push de ; save screen start address
push hl ; save bitmap start
ld a,(de) ; first byte of screen to A
xor (hl) ; xor with corresponding character byte
jr z,S_SC_MTCH ; forward to S-SC-MTCH if they match
; if inverse result would be $FF
; if any other then mismatch
inc a ; set to $00 if inverse
jr nz,S_SCR_NXT ; forward to S-SCR-NXT if a mismatch
dec a ; restore $FF
; a match has been found so seven more to test.
;; S-SC-MTCH
S_SC_MTCH:
ld c,a ; load C with inverse mask $00 or $FF
ld b,0x07 ; count seven more bytes
;; S-SC-ROWS
S_SC_ROWS:
inc d ; increment screen address.
inc hl ; increment bitmap address.
ld a,(de) ; byte to A
xor (hl) ; will give $00 or $FF (inverse)
xor c ; xor with inverse mask
jr nz,S_SCR_NXT ; forward to S-SCR-NXT if no match.
djnz S_SC_ROWS ; back to S-SC-ROWS until all eight matched.
; continue if a match of all eight bytes was found
pop bc ; discard the
pop bc ; saved
pop bc ; pointers
ld a,0x80 ; the endpoint of character set
sub b ; subtract the counter
; to give the code 32-127
ld bc,0x0001 ; make one space in workspace.
rst 0x30 ; BC-SPACES creates the space sliding
; the calculator stack upwards.
ld (de),a ; start is addressed by DE, so insert code
jr S_SCR_STO ; forward to S-SCR-STO
; ---
; the jump was here if no match and more bitmaps to test.
;; S-SCR-NXT
S_SCR_NXT:
pop hl ; restore the last bitmap start
ld de,0x0008 ; and prepare to add 8.
add hl,de ; now addresses next character bitmap.
pop de ; restore screen address
pop bc ; and character counter in B
djnz S_SCRN_LP ; back to S-SCRN-LP if more characters.
ld c,b ; B is now zero, so BC now zero.
;; S-SCR-STO
S_SCR_STO:
jp STK_STO__ ; to STK-STO-$ to store the string in
; workspace or a string with zero length.
; (value of DE doesn't matter in last case)
; Note. this exit seems correct but the general-purpose routine S-STRING
; that calls this one will also stack any of its string results so this
; leads to a double storing of the result in this case.
; The instruction at L257D should just be a RET.
; credit Stephen Kelly and others, 1982.
; -------------
; Scanning ATTR
; -------------
; This function subroutine returns the attributes of a screen location -
; a numeric result.
; Again it's up to the BASIC programmer to supply valid values of line/column.
;; S-ATTR-S
S_ATTR_S:
call STK_TO_BC ; routine STK-TO-BC fetches line to C,
; and column to B.
ld a,c ; line to A $00 - $17 (max 00010111)
rrca ; rotate
rrca ; bits
rrca ; left.
ld c,a ; store in C as an intermediate value.
and 0xE0 ; pick up bits 11100000 ( was 00011100 )
xor b ; combine with column $00 - $1F
ld l,a ; low byte now correct.
ld a,c ; bring back intermediate result from C
and 0x03 ; mask to give correct third of
; screen $00 - $02
xor 0x58 ; combine with base address.
ld h,a ; high byte correct.
ld a,(hl) ; pick up the colour attribute.
jp STACK_A ; forward to STACK-A to store result
; and make an indirect exit.
; -----------------------
; Scanning function table
; -----------------------
; This table is used by INDEXER routine to find the offsets to
; four operators and eight functions. e.g. $A8 is the token 'FN'.
; This table is used in the first instance for the first character of an
; expression or by a recursive call to SCANNING for the first character of
; any sub-expression. It eliminates functions that have no argument or
; functions that can have more than one argument and therefore require
; braces. By eliminating and dealing with these now it can later take a
; simplistic approach to all other functions and assume that they have
; one argument.
; Similarly by eliminating BIN and '.' now it is later able to assume that
; all numbers begin with a digit and that the presence of a number or
; variable can be detected by a call to ALPHANUM.
; By default all expressions are positive and the spurious '+' is eliminated
; now as in print +2. This should not be confused with the operator '+'.
; Note. this does allow a degree of nonsense to be accepted as in
; PRINT +"3 is the greatest.".
; An acquired programming skill is the ability to include brackets where
; they are not necessary.
; A bracket at the start of a sub-expression may be spurious or necessary
; to denote that the contained expression is to be evaluated as an entity.
; In either case this is dealt with by recursive calls to SCANNING.
; An expression that begins with a quote requires special treatment.
;; scan-func
scan_func:
defb 0x22 ; $1C offset to S-QUOTE
defb S_QUOTE - $
defm '(' ; $4F offset to S-BRACKET
defb S_BRACKET - $
defm '.' ; $F2 offset to S-DECIMAL
defb S_DECIMAL - $
defm '+' ; $12 offset to S-U-PLUS
defb S_U_PLUS - $
defb 0xA8 ; $56 offset to S-FN
defb S_FN - $
defb 0xA5 ; $57 offset to S-RND
defb S_RND - $
defb 0xA7 ; $84 offset to S-PI
defb S_PI - $
defb 0xA6 ; $8F offset to S-INKEY$
defb S_INKEY_ - $
defb 0xC4 ; $E6 offset to S-BIN
defb S_DECIMAL - $
defb 0xAA ; $BF offset to S-SCREEN$
defb S_SCREEN_ - $
defb 0xAB ; $C7 offset to S-ATTR
defb S_ATTR - $
defb 0xA9 ; $CE offset to S-POINT
defb S_POINT - $
defb 0x00 ; zero end marker
; --------------------------
; Scanning function routines
; --------------------------
; These are the 11 subroutines accessed by the above table.
; S-BIN and S-DECIMAL are the same
; The 1-byte offset limits their location to within 255 bytes of their
; entry in the table.
; ->
;; S-U-PLUS
S_U_PLUS:
rst 0x20 ; NEXT-CHAR just ignore
jp S_LOOP_1 ; to S-LOOP-1
; ---
; ->
;; S-QUOTE
S_QUOTE:
rst 0x18 ; GET-CHAR
inc hl ; address next character (first in quotes)
push hl ; save start of quoted text.
ld bc,0x0000 ; initialize length of string to zero.
call S_QUOTE_S ; routine S-QUOTE-S
jr nz,S_Q_PRMS ; forward to S-Q-PRMS if
;; S-Q-AGAIN
S_Q_AGAIN:
call S_QUOTE_S ; routine S-QUOTE-S copies string until a
; quote is encountered
jr z,S_Q_AGAIN ; back to S-Q-AGAIN if two quotes WERE
; together.
; but if just an isolated quote then that terminates the string.
call SYNTAX_Z ; routine SYNTAX-Z
jr z,S_Q_PRMS ; forward to S-Q-PRMS if checking syntax.
rst 0x30 ; BC-SPACES creates the space for true
; copy of string in workspace.
pop hl ; re-fetch start of quoted text.
push de ; save start in workspace.
;; S-Q-COPY
S_Q_COPY:
ldi a,(hl) ; fetch a character from source.
; advance source address.
ldi (de),a ; place in destination.
; advance destination address.
cp 0x22 ; was it a '"' just copied ?
jr nz,S_Q_COPY ; back to S-Q-COPY to copy more if not
ldi a,(hl) ; fetch adjacent character from source.
; advance source address.
cp 0x22 ; is this '"' ? - i.e. two quotes together ?
jr z,S_Q_COPY ; to S-Q-COPY if so including just one of the
; pair of quotes.
; proceed when terminating quote encountered.
;; S-Q-PRMS
S_Q_PRMS:
dec bc ; decrease count by 1.
pop de ; restore start of string in workspace.
;; S-STRING
S_STRING:
ld hl,FLAGS ; Address FLAGS system variable.
res 6,(hl) ; signal string result.
bit 7,(hl) ; is syntax being checked.
call nz,STK_STO__ ; routine STK-STO-$ is called in runtime.
jp S_CONT_2 ; jump forward to S-CONT-2 ===>
; ---
; ->
;; S-BRACKET
S_BRACKET:
rst 0x20 ; NEXT-CHAR
call SCANNING ; routine SCANNING is called recursively.
cp 0x29 ; is it the closing ')' ?
jp nz,REPORT_C ; jump back to REPORT-C if not
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR
jp S_CONT_2 ; jump forward to S-CONT-2 ===>
; ---
; ->
;; S-FN
S_FN:
jp S_FN_SBRN ; jump forward to S-FN-SBRN.
; --------------------------------------------------------------------
;
; RANDOM THEORY from the ZX81 manual by Steven Vickers
;
; (same algorithm as the ZX Spectrum).
;
; Chapter 5. Exercise 6. (For mathematicians only.)
;
; Let p be a [large] prime, & let a be a primitive root modulo p.
; Then if b_i is the residue of a^i modulo p (1<=b_i<p-1), the
; sequence
;
; (b_i-1)/(p-1)
;
; is a cyclical sequence of p-1 distinct numbers in the range 0 to 1
; (excluding 1). By choosing a suitably, these can be made to look
; fairly random.
;
; 65537 is a Mersenne prime 2^16-1. Note.
;
; Use this, & Gauss' law of quadratic reciprocity, to show that 75
; is a primitive root modulo 65537.
;
; The ZX81 uses p=65537 & a=75, & stores some b_i-1 in memory.
; The function RND involves replacing b_i-1 in memory by b_(i+1)-1,
; & yielding the result (b_(i+1)-1)/(p-1). RAND n (with 1<=n<=65535)
; makes b_i equal to n+1.
;
; --------------------------------------------------------------------
;
; Steven Vickers writing in comp.sys.sinclair on 20-DEC-1993
;
; Note. (Of course, 65537 is 2^16 + 1, not -1.)
;
; Consider arithmetic modulo a prime p. There are p residue classes, and the
; non-zero ones are all invertible. Hence under multiplication they form a
; group (Fp*, say) of order p-1; moreover (and not so obvious) Fp* is cyclic.
; Its generators are the "primitive roots". The "quadratic residues modulo p"
; are the squares in Fp*, and the "Legendre symbol" (d/p) is defined (when p
; does not divide d) as +1 or -1, according as d is or is not a quadratic
; residue mod p.
;
; In the case when p = 65537, we can show that d is a primitive root if and
; only if it's not a quadratic residue. For let w be a primitive root, d
; congruent to w^r (mod p). If d is not primitive, then its order is a proper
; factor of 65536: hence w^{32768*r} = 1 (mod p), so 65536 divides 32768*r,
; and hence r is even and d is a square (mod p). Conversely, the squares in
; Fp* form a subgroup of (Fp*)^2 of index 2, and so cannot be generators.
;
; Hence to check whether 75 is primitive mod 65537, we want to calculate that
; (75/65537) = -1. There is a multiplicative formula (ab/p) = (a/p)(b/p) (mod
; p), so (75/65537) = (5/65537)^2 * (3/65537) = (3/65537). Now the law of
; quadratic reciprocity says that if p and q are distinct odd primes, then
;
; (p/q)(q/p) = (-1)^{(p-1)(q-1)/4}
;
; Hence (3/65537) = (65537/3) * (-1)^{65536*2/4} = (65537/3)
; = (2/3) (because 65537 = 2 mod 3)
; = -1
;
; (I referred to Pierre Samuel's "Algebraic Theory of Numbers".)
;
; ->
;; S-RND
S_RND:
call SYNTAX_Z ; routine SYNTAX-Z
jr z,S_RND_END ; forward to S-RND-END if checking syntax.
ld bc,(SEED) ; fetch system variable SEED
call STACK_BC ; routine STACK-BC places on calculator stack
rst 0x28 ; ; FP-CALC ;s.
defb 0xA1 ; ;stk-one ;s,1.
defb 0x0F ; ;addition ;s+1.
defb 0x34 ; ;stk-data ;
defb 0x37 ; ;Exponent: $87,
; ;Bytes: 1
defb 0x16 ; ;(+00,+00,+00) ;s+1,75.
defb 0x04 ; ;multiply ;(s+1)*75 = v
defb 0x34 ; ;stk-data ;v.
defb 0x80 ; ;Bytes: 3
defb 0x41,0x00,0x00,0x80
; ;Exponent $91
; ;(+00) ;v,65537.
defb 0x32 ; ;n-mod-m ;remainder, result.
defb 0x02 ; ;delete ;remainder.
defb 0xA1 ; ;stk-one ;remainder, 1.
defb 0x03 ; ;subtract ;remainder - 1. = rnd
defb 0x31 ; ;duplicate ;rnd,rnd.
defb 0x38 ; ;end-calc
call FP_TO_BC ; routine FP-TO-BC
ld (SEED),bc ; store in SEED for next starting point.
ld a,(hl) ; fetch exponent
and a ; is it zero ?
jr z,S_RND_END ; forward if so to S-RND-END
sub 0x10 ; reduce exponent by 2^16
ld (hl),a ; place back
;; S-RND-END
S_RND_END:
jr S_PI_END ; forward to S-PI-END
; ---
; the number PI 3.14159...
; ->
;; S-PI
S_PI:
call SYNTAX_Z ; routine SYNTAX-Z
jr z,S_PI_END ; to S-PI-END if checking syntax.
rst 0x28 ; ; FP-CALC
defb 0xA3 ; ;stk-pi/2 pi/2.
defb 0x38 ; ;end-calc
inc (hl) ; increment the exponent leaving pi
; on the calculator stack.
;; S-PI-END
S_PI_END:
rst 0x20 ; NEXT-CHAR
jp S_NUMERIC ; jump forward to S-NUMERIC
; ---
; ->
;; S-INKEY$
S_INKEY_:
ld bc,0x105A ; priority $10, operation code $1A ('read-in')
; +$40 for string result, numeric operand.
; set this up now in case we need to use the
; calculator.
rst 0x20 ; NEXT-CHAR
cp 0x23 ; '#' ?
jp z,S_PUSH_PO ; to S-PUSH-PO if so to use the calculator
; single operation
; to read from network/RS232 etc. .
; else read a key from the keyboard.
ld hl,FLAGS ; fetch FLAGS
res 6,(hl) ; signal string result.
bit 7,(hl) ; checking syntax ?
jr z,S_INK__EN ; forward to S-INK$-EN if so
call KEY_SCAN ; routine KEY-SCAN key in E, shift in D.
ld c,0x00 ; the length of an empty string
jr nz,S_IK__STK ; to S-IK$-STK to store empty string if
; no key returned.
call K_TEST ; routine K-TEST get main code in A
jr nc,S_IK__STK ; to S-IK$-STK to stack null string if
; invalid
dec d ; D is expected to be FLAGS so set bit 3 $FF
; 'L' Mode so no keywords.
ld e,a ; main key to A
; C is MODE 0 'KLC' from above still.
call K_DECODE ; routine K-DECODE
push af ; save the code
ld bc,0x0001 ; make room for one character
rst 0x30 ; BC-SPACES
pop af ; bring the code back
ld (de),a ; put the key in workspace
ld c,0x01 ; set C length to one
;; S-IK$-STK
S_IK__STK:
ld b,0x00 ; set high byte of length to zero
call STK_STO__ ; routine STK-STO-$
;; S-INK$-EN
S_INK__EN:
jp S_CONT_2 ; to S-CONT-2 ===>
; ---
; ->
;; S-SCREEN$
S_SCREEN_:
call S_2_COORD ; routine S-2-COORD
call nz,S_SCRN__S ; routine S-SCRN$-S
rst 0x20 ; NEXT-CHAR
jp S_STRING ; forward to S-STRING to stack result
; ---
; ->
;; S-ATTR
S_ATTR:
call S_2_COORD ; routine S-2-COORD
call nz,S_ATTR_S ; routine S-ATTR-S
rst 0x20 ; NEXT-CHAR
jr S_NUMERIC ; forward to S-NUMERIC
; ---
; ->
;; S-POINT
S_POINT:
call S_2_COORD ; routine S-2-COORD
call nz,POINT_SUB ; routine POINT-SUB
rst 0x20 ; NEXT-CHAR
jr S_NUMERIC ; forward to S-NUMERIC
; -----------------------------
; ==> The branch was here if not in table.
;; S-ALPHNUM
S_ALPHNUM:
call ALPHANUM ; routine ALPHANUM checks if variable or
; a digit.
jr nc,S_NEGATE ; forward to S-NEGATE if not to consider
; a '-' character then functions.
cp 0x41 ; compare 'A'
jr nc,S_LETTER ; forward to S-LETTER if alpha ->
; else must have been numeric so continue
; into that routine.
; This important routine is called during runtime and from LINE-SCAN
; when a BASIC line is checked for syntax. It is this routine that
; inserts, during syntax checking, the invisible floating point numbers
; after the numeric expression. During runtime it just picks these
; numbers up. It also handles BIN format numbers.
; ->
;; S-BIN
;; S-DECIMAL
S_DECIMAL:
call SYNTAX_Z ; routine SYNTAX-Z
jr nz,S_STK_DEC ; to S-STK-DEC in runtime
; this route is taken when checking syntax.
call DEC_TO_FP ; routine DEC-TO-FP to evaluate number
rst 0x18 ; GET-CHAR to fetch HL
ld bc,0x0006 ; six locations required
call MAKE_ROOM ; routine MAKE-ROOM
inc hl ; to first new location
ldi (hl),0x0E ; insert number marker
; address next
ex de,hl ; make DE destination.
ld hl,(STKEND) ; STKEND points to end of stack.
ld c,0x05 ; result is five locations lower
and a ; prepare for true subtraction
sbc hl,bc ; point to start of value.
ld (STKEND),hl ; update STKEND as we are taking number.
ldir ; Copy five bytes to program location
ex de,hl ; transfer pointer to HL
dec hl ; adjust
call TEMP_PTR1 ; routine TEMP-PTR1 sets CH-ADD
jr S_NUMERIC ; to S-NUMERIC to record nature of result
; ---
; branch here in runtime.
;; S-STK-DEC
S_STK_DEC:
rst 0x18 ; GET-CHAR positions HL at digit.
;; S-SD-SKIP
S_SD_SKIP:
inc hl ; advance pointer
ld a,(hl) ; until we find
cp 0x0E ; chr 14d - the number indicator
jr nz,S_SD_SKIP ; to S-SD-SKIP until a match
; it has to be here.
inc hl ; point to first byte of number
call STACK_NUM ; routine STACK-NUM stacks it
ld (CH_ADD),hl ; update system variable CH_ADD
;; S-NUMERIC
S_NUMERIC:
set 6,(iy+FLAGS-IY0) ; update FLAGS - Signal numeric result
jr S_CONT_1 ; forward to S-CONT-1 ===>
; actually S-CONT-2 is destination but why
; waste a byte on a jump when a JR will do.
; Actually a JR L2712 can be used. Rats.
; end of functions accessed from scanning functions table.
; --------------------------
; Scanning variable routines
; --------------------------
;
;
;; S-LETTER
S_LETTER:
call LOOK_VARS ; routine LOOK-VARS
jp c,REPORT_2 ; jump back to REPORT-2 if variable not found
; 'Variable not found'
; but a variable is always 'found' if syntax
; is being checked.
call z,STK_VAR ; routine STK-VAR considers a subscript/slice
ld a,(FLAGS) ; fetch FLAGS value
cp 0xC0 ; compare 11000000
jr c,S_CONT_1 ; step forward to S-CONT-1 if string ===>
inc hl ; advance pointer
call STACK_NUM ; routine STACK-NUM
;; S-CONT-1
S_CONT_1:
jr S_CONT_2 ; forward to S-CONT-2 ===>
; ----------------------------------------
; -> the scanning branch was here if not alphanumeric.
; All the remaining functions will be evaluated by a single call to the
; calculator. The correct priority for the operation has to be placed in
; the B register and the operation code, calculator literal in the C register.
; the operation code has bit 7 set if result is numeric and bit 6 is
; set if operand is numeric. so
; $C0 = numeric result, numeric operand. e.g. 'sin'
; $80 = numeric result, string operand. e.g. 'code'
; $40 = string result, numeric operand. e.g. 'str$'
; $00 = string result, string operand. e.g. 'val$'
;; S-NEGATE
S_NEGATE:
ld bc,0x09DB ; prepare priority 09, operation code $C0 +
; 'negate' ($1B) - bits 6 and 7 set for numeric
; result and numeric operand.
cp 0x2D ; is it '-' ?
jr z,S_PUSH_PO ; forward if so to S-PUSH-PO
ld bc,0x1018 ; prepare priority $10, operation code 'val$' -
; bits 6 and 7 reset for string result and
; string operand.
cp 0xAE ; is it 'VAL$' ?
jr z,S_PUSH_PO ; forward if so to S-PUSH-PO
sub 0xAF ; subtract token 'CODE' value to reduce
; functions 'CODE' to 'NOT' although the
; upper range is, as yet, unchecked.
; valid range would be $00 - $14.
jp c,REPORT_C ; jump back to REPORT-C with anything else
; 'Nonsense in BASIC'
ld bc,0x04F0 ; prepare priority $04, operation $C0 +
; 'not' ($30)
cp 0x14 ; is it 'NOT'
jr z,S_PUSH_PO ; forward to S-PUSH-PO if so
jp nc,REPORT_C ; to REPORT-C if higher
; 'Nonsense in BASIC'
ld b,0x10 ; priority $10 for all the rest
add a,0xDC ; make range $DC - $EF
; $C0 + 'code'($1C) thru 'chr$' ($2F)
ld c,a ; transfer 'function' to C
cp 0xDF ; is it 'sin' ?
jr nc,S_NO_TO__ ; forward to S-NO-TO-$ with 'sin' through
; 'chr$' as operand is numeric.
; all the rest 'cos' through 'chr$' give a numeric result except 'str$'
; and 'chr$'.
res 6,c ; signal string operand for 'code', 'val' and
; 'len'.
;; S-NO-TO-$
S_NO_TO__:
cp 0xEE ; compare 'str$'
jr c,S_PUSH_PO ; forward to S-PUSH-PO if lower as result
; is numeric.
res 7,c ; reset bit 7 of op code for 'str$', 'chr$'
; as result is string.
; >> This is where they were all headed for.
;; S-PUSH-PO
S_PUSH_PO:
push bc ; push the priority and calculator operation
; code.
rst 0x20 ; NEXT-CHAR
jp S_LOOP_1 ; jump back to S-LOOP-1 to go round the loop
; again with the next character.
; --------------------------------
; ===> there were many branches forward to here
; An important step after the evaluation of an expression is to test for
; a string expression and allow it to be sliced. If a numeric expression is
; followed by a '(' then the numeric expression is complete.
; Since a string slice can itself be sliced then loop repeatedly
; e.g. (STR$ PI) (3 TO) (TO 2) or "nonsense" (4 TO )
;; S-CONT-2
S_CONT_2:
rst 0x18 ; GET-CHAR
;; S-CONT-3
S_CONT_3:
cp 0x28 ; is it '(' ?
jr nz,S_OPERTR ; forward, if not, to S-OPERTR
bit 6,(iy+FLAGS-IY0) ; test FLAGS - numeric or string result ?
jr nz,S_LOOP ; forward, if numeric, to S-LOOP
; if a string expression preceded the '(' then slice it.
call SLICING ; routine SLICING
rst 0x20 ; NEXT-CHAR
jr S_CONT_3 ; loop back to S-CONT-3
; ---------------------------
; the branch was here when possibility of a '(' has been excluded.
;; S-OPERTR
S_OPERTR:
ld b,0x00 ; prepare to add
ld c,a ; possible operator to C
ld hl,tbl_of_ops ; Address: $2795 - tbl-of-ops
call INDEXER ; routine INDEXER
jr nc,S_LOOP ; forward to S-LOOP if not in table
; but if found in table the priority has to be looked up.
ld c,(hl) ; operation code to C ( B is still zero )
ld hl,tbl_priors-0xC3 ; $26ED is base of table
add hl,bc ; index into table.
ld b,(hl) ; priority to B.
; ------------------
; Scanning main loop
; ------------------
; the juggling act
;; S-LOOP
S_LOOP:
pop de ; fetch last priority and operation
ld a,d ; priority to A
cp b ; compare with this one
jr c,S_TIGHTER ; forward to S-TIGHTER to execute the
; last operation before this one as it has
; higher priority.
; the last priority was greater or equal this one.
and a ; if it is zero then so is this
jp z,GET_CHAR ; jump to exit via get-char pointing at
; next character.
; This may be the character after the
; expression or, if exiting a recursive call,
; the next part of the expression to be
; evaluated.
push bc ; save current priority/operation
; as it has lower precedence than the one
; now in DE.
; the 'USR' function is special in that it is overloaded to give two types
; of result.
ld hl,FLAGS ; address FLAGS
ld a,e ; new operation to A register
cp 0xED ; is it $C0 + 'usr-no' ($2D) ?
jr nz,S_STK_LST ; forward to S-STK-LST if not
bit 6,(hl) ; string result expected ?
; (from the lower priority operand we've
; just pushed on stack )
jr nz,S_STK_LST ; forward to S-STK-LST if numeric
; as operand bits match.
ld e,0x99 ; reset bit 6 and substitute $19 'usr-$'
; for string operand.
;; S-STK-LST
S_STK_LST:
push de ; now stack this priority/operation
call SYNTAX_Z ; routine SYNTAX-Z
jr z,S_SYNTEST ; forward to S-SYNTEST if checking syntax.
ld a,e ; fetch the operation code
and 0x3F ; mask off the result/operand bits to leave
; a calculator literal.
ld b,a ; transfer to B register
; now use the calculator to perform the single operation - operand is on
; the calculator stack.
; Note. although the calculator is performing a single operation most
; functions e.g. TAN are written using other functions and literals and
; these in turn are written using further strings of calculator literals so
; another level of magical recursion joins the juggling act for a while
; as the calculator too is calling itself.
rst 0x28 ; ; FP-CALC
defb 0x3B ; ;fp-calc-2
L2758:
defb 0x38 ; ;end-calc
jr S_RUNTEST ; forward to S-RUNTEST
; ---
; the branch was here if checking syntax only.
;; S-SYNTEST
S_SYNTEST:
ld a,e ; fetch the operation code to accumulator
xor (iy+FLAGS-IY0) ; compare with bits of FLAGS
and 0x40 ; bit 6 will be zero now if operand
; matched expected result.
;; S-RPORT-C2
S_RPORT_C2:
jp nz,REPORT_C ; to REPORT-C if mismatch
; 'Nonsense in BASIC'
; else continue to set flags for next
; the branch is to here in runtime after a successful operation.
;; S-RUNTEST
S_RUNTEST:
pop de ; fetch the last operation from stack
ld hl,FLAGS ; address FLAGS
set 6,(hl) ; set default to numeric result in FLAGS
bit 7,e ; test the operational result
jr nz,S_LOOPEND ; forward to S-LOOPEND if numeric
res 6,(hl) ; reset bit 6 of FLAGS to show string result.
;; S-LOOPEND
S_LOOPEND:
pop bc ; fetch the previous priority/operation
jr S_LOOP ; back to S-LOOP to perform these
; ---
; the branch was here when a stacked priority/operator had higher priority
; than the current one.
;; S-TIGHTER
S_TIGHTER:
push de ; save high priority op on stack again
ld a,c ; fetch lower priority operation code
bit 6,(iy+FLAGS-IY0) ; test FLAGS - Numeric or string result ?
jr nz,S_NEXT ; forward to S-NEXT if numeric result
; if this is lower priority yet has string then must be a comparison.
; Since these can only be evaluated in context and were defaulted to
; numeric in operator look up they must be changed to string equivalents.
and 0x3F ; mask to give true calculator literal
add a,0x08 ; augment numeric literals to string
; equivalents.
; 'no-&-no' => 'str-&-no'
; 'no-l-eql' => 'str-l-eql'
; 'no-gr-eq' => 'str-gr-eq'
; 'nos-neql' => 'strs-neql'
; 'no-grtr' => 'str-grtr'
; 'no-less' => 'str-less'
; 'nos-eql' => 'strs-eql'
; 'addition' => 'strs-add'
ld c,a ; put modified comparison operator back
cp 0x10 ; is it now 'str-&-no' ?
jr nz,S_NOT_AND ; forward to S-NOT-AND if not.
set 6,c ; set numeric operand bit
jr S_NEXT ; forward to S-NEXT
; ---
;; S-NOT-AND
S_NOT_AND:
jr c,S_RPORT_C2 ; back to S-RPORT-C2 if less
; 'Nonsense in BASIC'.
; e.g. a$ * b$
cp 0x17 ; is it 'strs-add' ?
jr z,S_NEXT ; forward to S-NEXT if so
; (bit 6 and 7 are reset)
set 7,c ; set numeric (Boolean) result for all others
;; S-NEXT
S_NEXT:
push bc ; now save this priority/operation on stack
rst 0x20 ; NEXT-CHAR
jp S_LOOP_1 ; jump back to S-LOOP-1
; ------------------
; Table of operators
; ------------------
; This table is used to look up the calculator literals associated with
; the operator character. The thirteen calculator operations $03 - $0F
; have bits 6 and 7 set to signify a numeric result.
; Some of these codes and bits may be altered later if the context suggests
; a string comparison or operation.
; that is '+', '=', '>', '<', '<=', '>=' or '<>'.
;; tbl-of-ops
tbl_of_ops:
defm '+' ; $C0 + 'addition'
defb 0xCF
defm '-' ; $C0 + 'subtract'
defb 0xC3
defm '*' ; $C0 + 'multiply'
defb 0xC4
defm '/' ; $C0 + 'division'
defb 0xC5
defm '^' ; $C0 + 'to-power'
defb 0xC6
defm '=' ; $C0 + 'nos-eql'
defb 0xCE
defm '>' ; $C0 + 'no-grtr'
defb 0xCC
defm '<' ; $C0 + 'no-less'
defb 0xCD
defb 0xC7 ; '<=' $C0 + 'no-l-eql'
defb 0xC9
defb 0xC8 ; '>=' $C0 + 'no-gr-eql'
defb 0xCA
defb 0xC9 ; '<>' $C0 + 'nos-neql'
defb 0xCB
defb 0xC5 ; 'OR' $C0 + 'or'
defb 0xC7
defb 0xC6 ; 'AND' $C0 + 'no-&-no'
defb 0xC8
defb 0x00 ; zero end-marker.
; -------------------
; Table of priorities
; -------------------
; This table is indexed with the operation code obtained from the above
; table $C3 - $CF to obtain the priority for the respective operation.
;; tbl-priors
tbl_priors:
defb 0x06 ; '-' opcode $C3
defb 0x08 ; '*' opcode $C4
defb 0x08 ; '/' opcode $C5
defb 0x0A ; '^' opcode $C6
defb 0x02 ; 'OR' opcode $C7
defb 0x03 ; 'AND' opcode $C8
defb 0x05 ; '<=' opcode $C9
defb 0x05 ; '>=' opcode $CA
defb 0x05 ; '<>' opcode $CB
defb 0x05 ; '>' opcode $CC
defb 0x05 ; '<' opcode $CD
defb 0x05 ; '=' opcode $CE
defb 0x06 ; '+' opcode $CF
; ----------------------
; Scanning function (FN)
; ----------------------
; This routine deals with user-defined functions.
; The definition can be anywhere in the program area but these are best
; placed near the start of the program as we shall see.
; The evaluation process is quite complex as the Spectrum has to parse two
; statements at the same time. Syntax of both has been checked previously
; and hidden locations have been created immediately after each argument
; of the DEF FN statement. Each of the arguments of the FN function is
; evaluated by SCANNING and placed in the hidden locations. Then the
; expression to the right of the DEF FN '=' is evaluated by SCANNING and for
; any variables encountered, a search is made in the DEF FN variable list
; in the program area before searching in the normal variables area.
;
; Recursion is not allowed: i.e. the definition of a function should not use
; the same function, either directly or indirectly ( through another function).
; You'll normally get error 4, ('Out of memory'), although sometimes the system
; will crash. - Vickers, Pitman 1984.
;
; As the definition is just an expression, there would seem to be no means
; of breaking out of such recursion.
; However, by the clever use of string expressions and VAL, such recursion is
; possible.
; e.g. DEF FN a(n) = VAL "n+FN a(n-1)+0" ((n<1) * 10 + 1 TO )
; will evaluate the full 11-character expression for all values where n is
; greater than zero but just the 11th character, "0", when n drops to zero
; thereby ending the recursion producing the correct result.
; Recursive string functions are possible using VAL$ instead of VAL and the
; null string as the final addend.
; - from a turn of the century newsgroup discussion initiated by Mike Wynne.
;; S-FN-SBRN
S_FN_SBRN:
call SYNTAX_Z ; routine SYNTAX-Z
jr nz,SF_RUN ; forward to SF-RUN in runtime
rst 0x20 ; NEXT-CHAR
call ALPHA ; routine ALPHA check for letters A-Z a-z
jp nc,REPORT_C ; jump back to REPORT-C if not
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR
cp 0x24 ; is it '$' ?
push af ; save character and flags
jr nz,SF_BRKT_1 ; forward to SF-BRKT-1 with numeric function
rst 0x20 ; NEXT-CHAR
;; SF-BRKT-1
SF_BRKT_1:
cp 0x28 ; is '(' ?
jr nz,SF_RPRT_C ; forward to SF-RPRT-C if not
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR
cp 0x29 ; is it ')' ?
jr z,SF_FLAG_6 ; forward to SF-FLAG-6 if no arguments.
;; SF-ARGMTS
SF_ARGMTS:
call SCANNING ; routine SCANNING checks each argument
; which may be an expression.
rst 0x18 ; GET-CHAR
cp 0x2C ; is it a ',' ?
jr nz,SF_BRKT_2 ; forward if not to SF-BRKT-2 to test bracket
rst 0x20 ; NEXT-CHAR if a comma was found
jr SF_ARGMTS ; back to SF-ARGMTS to parse all arguments.
; ---
;; SF-BRKT-2
SF_BRKT_2:
cp 0x29 ; is character the closing ')' ?
;; SF-RPRT-C
SF_RPRT_C:
jp nz,REPORT_C ; jump to REPORT-C
; 'Nonsense in BASIC'
; at this point any optional arguments have had their syntax checked.
;; SF-FLAG-6
SF_FLAG_6:
rst 0x20 ; NEXT-CHAR
ld hl,FLAGS ; address system variable FLAGS
res 6,(hl) ; signal string result
pop af ; restore test against '$'.
jr z,SF_SYN_EN ; forward to SF-SYN-EN if string function.
set 6,(hl) ; signal numeric result
;; SF-SYN-EN
SF_SYN_EN:
jp S_CONT_2 ; jump back to S-CONT-2 to continue scanning.
; ---
; the branch was here in runtime.
;; SF-RUN
SF_RUN:
rst 0x20 ; NEXT-CHAR fetches name
and 0xDF ; AND 11101111 - reset bit 5 - upper-case.
ld b,a ; save in B
rst 0x20 ; NEXT-CHAR
sub 0x24 ; subtract '$'
ld c,a ; save result in C
jr nz,SF_ARGMT1 ; forward if not '$' to SF-ARGMT1
rst 0x20 ; NEXT-CHAR advances to bracket
;; SF-ARGMT1
SF_ARGMT1:
rst 0x20 ; NEXT-CHAR advances to start of argument
push hl ; save address
ld hl,(PROG) ; fetch start of program area from PROG
dec hl ; the search starting point is the previous
; location.
;; SF-FND-DF
SF_FND_DF:
ld de,0x00CE ; search is for token 'DEF FN' in E,
; statement count in D.
push bc ; save C the string test, and B the letter.
call LOOK_PROG ; routine LOOK-PROG will search for token.
pop bc ; restore BC.
jr nc,SF_CP_DEF ; forward to SF-CP-DEF if a match was found.
;; REPORT-P
REPORT_P:
rst 0x08 ; ERROR-1
defb 0x18 ; Error Report: FN without DEF
;; SF-CP-DEF
SF_CP_DEF:
push hl ; save address of DEF FN
call FN_SKPOVR ; routine FN-SKPOVR skips over white-space etc.
; without disturbing CH-ADD.
and 0xDF ; make fetched character upper-case.
cp b ; compare with FN name
jr nz,SF_NOT_FD ; forward to SF-NOT-FD if no match.
; the letters match so test the type.
call FN_SKPOVR ; routine FN-SKPOVR skips white-space
sub 0x24 ; subtract '$' from fetched character
cp c ; compare with saved result of same operation
; on FN name.
jr z,SF_VALUES ; forward to SF-VALUES with a match.
; the letters matched but one was string and the other numeric.
;; SF-NOT-FD
SF_NOT_FD:
pop hl ; restore search point.
dec hl ; make location before
ld de,0x0200 ; the search is to be for the end of the
; current definition - 2 statements forward.
push bc ; save the letter/type
call EACH_STMT ; routine EACH-STMT steps past rejected
; definition.
pop bc ; restore letter/type
jr SF_FND_DF ; back to SF-FND-DF to continue search
; ---
; Success!
; the branch was here with matching letter and numeric/string type.
;; SF-VALUES
SF_VALUES:
and a ; test A ( will be zero if string '$' - '$' )
call z,FN_SKPOVR ; routine FN-SKPOVR advances HL past '$'.
pop de ; discard pointer to 'DEF FN'.
pop de ; restore pointer to first FN argument.
ld (CH_ADD),de ; save in CH_ADD
call FN_SKPOVR ; routine FN-SKPOVR advances HL past '('
push hl ; save start address in DEF FN ***
cp 0x29 ; is character a ')' ?
jr z,SF_R_BR_2 ; forward to SF-R-BR-2 if no arguments.
;; SF-ARG-LP
SF_ARG_LP:
inc hl ; point to next character.
ld a,(hl) ; fetch it.
cp 0x0E ; is it the number marker
ld d,0x40 ; signal numeric in D.
jr z,SF_ARG_VL ; forward to SF-ARG-VL if numeric.
dec hl ; back to letter
call FN_SKPOVR ; routine FN-SKPOVR skips any white-space
inc hl ; advance past the expected '$' to
; the 'hidden' marker.
ld d,0x00 ; signal string.
;; SF-ARG-VL
SF_ARG_VL:
inc hl ; now address first of 5-byte location.
push hl ; save address in DEF FN statement
push de ; save D - result type
call SCANNING ; routine SCANNING evaluates expression in
; the FN statement setting FLAGS and leaving
; result as last value on calculator stack.
pop af ; restore saved result type to A
xor (iy+FLAGS-IY0) ; xor with FLAGS
and 0x40 ; and with 01000000 to test bit 6
jr nz,REPORT_Q ; forward to REPORT-Q if type mismatch.
; 'Parameter error'
pop hl ; pop the start address in DEF FN statement
ex de,hl ; transfer to DE ?? pop straight into de ?
ld hl,(STKEND) ; set HL to STKEND location after value
ld bc,0x0005 ; five bytes to move
sbc hl,bc ; decrease HL by 5 to point to start.
ld (STKEND),hl ; set STKEND 'removing' value from stack.
ldir ; copy value into DEF FN statement
ex de,hl ; set HL to location after value in DEF FN
dec hl ; step back one
call FN_SKPOVR ; routine FN-SKPOVR gets next valid character
cp 0x29 ; is it ')' end of arguments ?
jr z,SF_R_BR_2 ; forward to SF-R-BR-2 if so.
; a comma separator has been encountered in the DEF FN argument list.
push hl ; save position in DEF FN statement
rst 0x18 ; GET-CHAR from FN statement
cp 0x2C ; is it ',' ?
jr nz,REPORT_Q ; forward to REPORT-Q if not
; 'Parameter error'
rst 0x20 ; NEXT-CHAR in FN statement advances to next
; argument.
pop hl ; restore DEF FN pointer
call FN_SKPOVR ; routine FN-SKPOVR advances to corresponding
; argument.
jr SF_ARG_LP ; back to SF-ARG-LP looping until all
; arguments are passed into the DEF FN
; hidden locations.
; ---
; the branch was here when all arguments passed.
;; SF-R-BR-2
SF_R_BR_2:
push hl ; save location of ')' in DEF FN
rst 0x18 ; GET-CHAR gets next character in FN
cp 0x29 ; is it a ')' also ?
jr z,SF_VALUE ; forward to SF-VALUE if so.
;; REPORT-Q
REPORT_Q:
rst 0x08 ; ERROR-1
defb 0x19 ; Error Report: Parameter error
;; SF-VALUE
SF_VALUE:
pop de ; location of ')' in DEF FN to DE.
ex de,hl ; now to HL, FN ')' pointer to DE.
ld (CH_ADD),hl ; initialize CH_ADD to this value.
; At this point the start of the DEF FN argument list is on the machine stack.
; We also have to consider that this defined function may form part of the
; definition of another defined function (though not itself).
; As this defined function may be part of a hierarchy of defined functions
; currently being evaluated by recursive calls to SCANNING, then we have to
; preserve the original value of DEFADD and not assume that it is zero.
ld hl,(DEFADD) ; get original DEFADD address
ex (sp),hl ; swap with DEF FN address on stack ***
ld (DEFADD),hl ; set DEFADD to point to this argument list
; during scanning.
push de ; save FN ')' pointer.
rst 0x20 ; NEXT-CHAR advances past ')' in define
rst 0x20 ; NEXT-CHAR advances past '=' to expression
call SCANNING ; routine SCANNING evaluates but searches
; initially for variables at DEFADD
pop hl ; pop the FN ')' pointer
ld (CH_ADD),hl ; set CH_ADD to this
pop hl ; pop the original DEFADD value
ld (DEFADD),hl ; and re-insert into DEFADD system variable.
rst 0x20 ; NEXT-CHAR advances to character after ')'
jp S_CONT_2 ; to S-CONT-2 - to continue current
; invocation of scanning
; --------------------
; Used to parse DEF FN
; --------------------
; e.g. DEF FN s $ ( x ) = b $ ( TO x ) : REM exaggerated
;
; This routine is used 10 times to advance along a DEF FN statement
; skipping spaces and colour control codes. It is similar to NEXT-CHAR
; which is, at the same time, used to skip along the corresponding FN function
; except the latter has to deal with AT and TAB characters in string
; expressions. These cannot occur in a program area so this routine is
; simpler as both colour controls and their parameters are less than space.
;; FN-SKPOVR
FN_SKPOVR:
inc hl ; increase pointer
ld a,(hl) ; fetch addressed character
cp 0x21 ; compare with space + 1
jr c,FN_SKPOVR ; back to FN-SKPOVR if less
ret ; return pointing to a valid character.
; ---------
; LOOK-VARS
; ---------
;
;
;; LOOK-VARS
LOOK_VARS:
set 6,(iy+FLAGS-IY0) ; update FLAGS - presume numeric result
rst 0x18 ; GET-CHAR
call ALPHA ; routine ALPHA tests for A-Za-z
jp nc,REPORT_C ; jump to REPORT-C if not.
; 'Nonsense in BASIC'
push hl ; save pointer to first letter ^1
and 0x1F ; mask lower bits, 1 - 26 decimal 000xxxxx
ld c,a ; store in C.
rst 0x20 ; NEXT-CHAR
push hl ; save pointer to second character ^2
cp 0x28 ; is it '(' - an array ?
jr z,V_RUN_SYN ; forward to V-RUN/SYN if so.
set 6,c ; set 6 signaling string if solitary 010
cp 0x24 ; is character a '$' ?
jr z,V_STR_VAR ; forward to V-STR-VAR
set 5,c ; signal numeric 011
call ALPHANUM ; routine ALPHANUM sets carry if second
; character is alphanumeric.
jr nc,V_TEST_FN ; forward to V-TEST-FN if just one character
; It is more than one character but re-test current character so that 6 reset
; This loop renders the similar loop at V-PASS redundant.
;; V-CHAR
V_CHAR:
call ALPHANUM ; routine ALPHANUM
jr nc,V_RUN_SYN ; to V-RUN/SYN when no more
res 6,c ; make long named type 001
rst 0x20 ; NEXT-CHAR
jr V_CHAR ; loop back to V-CHAR
; ---
;; V-STR-VAR
V_STR_VAR:
rst 0x20 ; NEXT-CHAR advances past '$'
res 6,(iy+FLAGS-IY0) ; update FLAGS - signal string result.
;; V-TEST-FN
V_TEST_FN:
ld a,(0x5C0C) ; load A with DEFADD_hi
and a ; and test for zero.
jr z,V_RUN_SYN ; forward to V-RUN/SYN if a defined function
; is not being evaluated.
; Note.
call SYNTAX_Z ; routine SYNTAX-Z
jp nz,STK_F_ARG ; JUMP to STK-F-ARG in runtime and then
; back to this point if no variable found.
;; V-RUN/SYN
V_RUN_SYN:
ld b,c ; save flags in B
call SYNTAX_Z ; routine SYNTAX-Z
jr nz,V_RUN ; to V-RUN to look for the variable in runtime
; if checking syntax the letter is not returned
ld a,c ; copy letter/flags to A
and 0xE0 ; and with 11100000 to get rid of the letter
set 7,a ; use spare bit to signal checking syntax.
ld c,a ; and transfer to C.
jr V_SYNTAX ; forward to V-SYNTAX
; ---
; but in runtime search for the variable.
;; V-RUN
V_RUN:
ld hl,(VARS) ; set HL to start of variables from VARS
;; V-EACH
V_EACH:
ld a,(hl) ; get first character
and 0x7F ; and with 01111111
; ignoring bit 7 which distinguishes
; arrays or for/next variables.
jr z,V_80_BYTE ; to V-80-BYTE if zero as must be 10000000
; the variables end-marker.
cp c ; compare with supplied value.
jr nz,V_NEXT ; forward to V-NEXT if no match.
rla ; destructively test
add a,a ; bits 5 and 6 of A
; jumping if bit 5 reset or 6 set
jp p,V_FOUND_2 ; to V-FOUND-2 strings and arrays
jr c,V_FOUND_2 ; to V-FOUND-2 simple and for next
; leaving long name variables.
pop de ; pop pointer to 2nd. char
push de ; save it again
push hl ; save variable first character pointer
;; V-MATCHES
V_MATCHES:
inc hl ; address next character in vars area
;; V-SPACES
V_SPACES:
ldi a,(de) ; pick up letter from prog area
; and advance address
cp 0x20 ; is it a space
jr z,V_SPACES ; back to V-SPACES until non-space
or 0x20 ; convert to range 1 - 26.
cp (hl) ; compare with addressed variables character
jr z,V_MATCHES ; loop back to V-MATCHES if a match on an
; intermediate letter.
or 0x80 ; now set bit 7 as last character of long
; names are inverted.
cp (hl) ; compare again
jr nz,V_GET_PTR ; forward to V-GET-PTR if no match
; but if they match check that this is also last letter in prog area
ld a,(de) ; fetch next character
call ALPHANUM ; routine ALPHANUM sets carry if not alphanum
jr nc,V_FOUND_1 ; forward to V-FOUND-1 with a full match.
;; V-GET-PTR
V_GET_PTR:
pop hl ; pop saved pointer to char 1
;; V-NEXT
V_NEXT:
push bc ; save flags
call NEXT_ONE ; routine NEXT-ONE gets next variable in DE
ex de,hl ; transfer to HL.
pop bc ; restore the flags
jr V_EACH ; loop back to V-EACH
; to compare each variable
; ---
;; V-80-BYTE
V_80_BYTE:
set 7,b ; will signal not found
; the branch was here when checking syntax
;; V-SYNTAX
V_SYNTAX:
pop de ; discard the pointer to 2nd. character v2
; in BASIC line/workspace.
rst 0x18 ; GET-CHAR gets character after variable name.
cp 0x28 ; is it '(' ?
jr z,V_PASS ; forward to V-PASS
; Note. could go straight to V-END ?
set 5,b ; signal not an array
jr V_END ; forward to V-END
; ---------------------------
; the jump was here when a long name matched and HL pointing to last character
; in variables area.
;; V-FOUND-1
V_FOUND_1:
pop de ; discard pointer to first var letter
; the jump was here with all other matches HL points to first var char.
;; V-FOUND-2
V_FOUND_2:
pop de ; discard pointer to 2nd prog char v2
pop de ; drop pointer to 1st prog char v1
push hl ; save pointer to last char in vars
rst 0x18 ; GET-CHAR
;; V-PASS
V_PASS:
call ALPHANUM ; routine ALPHANUM
jr nc,V_END ; forward to V-END if not
; but it never will be as we advanced past long-named variables earlier.
rst 0x20 ; NEXT-CHAR
jr V_PASS ; back to V-PASS
; ---
;; V-END
V_END:
pop hl ; pop the pointer to first character in
; BASIC line/workspace.
rl b ; rotate the B register left
; bit 7 to carry
bit 6,b ; test the array indicator bit.
ret ; return
; -----------------------
; Stack function argument
; -----------------------
; This branch is taken from LOOK-VARS when a defined function is currently
; being evaluated.
; Scanning is evaluating the expression after the '=' and the variable
; found could be in the argument list to the left of the '=' or in the
; normal place after the program. Preference will be given to the former.
; The variable name to be matched is in C.
;; STK-F-ARG
STK_F_ARG:
ld hl,(DEFADD) ; set HL to DEFADD
ld a,(hl) ; load the first character
cp 0x29 ; is it ')' ?
jp z,V_RUN_SYN ; JUMP back to V-RUN/SYN, if so, as there are
; no arguments.
; but proceed to search argument list of defined function first if not empty.
;; SFA-LOOP
SFA_LOOP:
ld a,(hl) ; fetch character again.
or 0x60 ; or with 01100000 presume a simple variable.
ld b,a ; save result in B.
inc hl ; address next location.
ld a,(hl) ; pick up byte.
cp 0x0E ; is it the number marker ?
jr z,SFA_CP_VR ; forward to SFA-CP-VR if so.
; it was a string. White-space may be present but syntax has been checked.
dec hl ; point back to letter.
call FN_SKPOVR ; routine FN-SKPOVR skips to the '$'
inc hl ; now address the hidden marker.
res 5,b ; signal a string variable.
;; SFA-CP-VR
SFA_CP_VR:
ld a,b ; transfer found variable letter to A.
cp c ; compare with expected.
jr z,SFA_MATCH ; forward to SFA-MATCH with a match.
inc hl ; step
inc hl ; past
inc hl ; the
inc hl ; five
inc hl ; bytes.
call FN_SKPOVR ; routine FN-SKPOVR skips to next character
cp 0x29 ; is it ')' ?
jp z,V_RUN_SYN ; jump back if so to V-RUN/SYN to look in
; normal variables area.
call FN_SKPOVR ; routine FN-SKPOVR skips past the ','
; all syntax has been checked and these
; things can be taken as read.
jr SFA_LOOP ; back to SFA-LOOP while there are more
; arguments.
; ---
;; SFA-MATCH
SFA_MATCH:
bit 5,c ; test if numeric
jr nz,SFA_END ; to SFA-END if so as will be stacked
; by scanning
inc hl ; point to start of string descriptor
ld de,(STKEND) ; set DE to STKEND
call MOVE_FP ; routine MOVE-FP puts parameters on stack.
ex de,hl ; new free location to HL.
ld (STKEND),hl ; use it to set STKEND system variable.
;; SFA-END
SFA_END:
pop de ; discard
pop de ; pointers.
xor a ; clear carry flag.
inc a ; and zero flag.
ret ; return.
; ------------------------
; Stack variable component
; ------------------------
; This is called to evaluate a complex structure that has been found, in
; runtime, by LOOK-VARS in the variables area.
; In this case HL points to the initial letter, bits 7-5
; of which indicate the type of variable.
; 010 - simple string, 110 - string array, 100 - array of numbers.
;
; It is called from CLASS-01 when assigning to a string or array including
; a slice.
; It is called from SCANNING to isolate the required part of the structure.
;
; An important part of the runtime process is to check that the number of
; dimensions of the variable match the number of subscripts supplied in the
; BASIC line.
;
; If checking syntax,
; the B register, which counts dimensions is set to zero (256) to allow
; the loop to continue till all subscripts are checked. While doing this it
; is reading dimension sizes from some arbitrary area of memory. Although
; these are meaningless it is of no concern as the limit is never checked by
; int-exp during syntax checking.
;
; The routine is also called from the syntax path of DIM command to check the
; syntax of both string and numeric arrays definitions except that bit 6 of C
; is reset so both are checked as numeric arrays. This ruse avoids a terminal
; slice being accepted as part of the DIM command.
; All that is being checked is that there are a valid set of comma-separated
; expressions before a terminal ')', although, as above, it will still go
; through the motions of checking dummy dimension sizes.
;; STK-VAR
STK_VAR:
xor a ; clear A
ld b,a ; and B, the syntax dimension counter (256)
bit 7,c ; checking syntax ?
jr nz,SV_COUNT ; forward to SV-COUNT if so.
; runtime evaluation.
bit 7,(hl) ; will be reset if a simple string.
jr nz,SV_ARRAYS ; forward to SV-ARRAYS otherwise
inc a ; set A to 1, simple string.
;; SV-SIMPLE$
SV_SIMPLE_:
inc hl ; address length low
ldi bc,(hl) ; place in C
; address length high
; place in B
; address start of string
ex de,hl ; DE = start now.
call STK_STO__ ; routine STK-STO-$ stacks string parameters
; DE start in variables area,
; BC length, A=1 simple string
; the only thing now is to consider if a slice is required.
rst 0x18 ; GET-CHAR puts character at CH_ADD in A
jp SV_SLICE_ ; jump forward to SV-SLICE? to test for '('
; --------------------------------------------------------
; the branch was here with string and numeric arrays in runtime.
;; SV-ARRAYS
SV_ARRAYS:
inc hl ; step past
inc hl ; the total length
inc hl ; to address Number of dimensions.
ld b,(hl) ; transfer to B overwriting zero.
bit 6,c ; a numeric array ?
jr z,SV_PTR ; forward to SV-PTR with numeric arrays
dec b ; ignore the final element of a string array
; the fixed string size.
jr z,SV_SIMPLE_ ; back to SV-SIMPLE$ if result is zero as has
; been created with DIM a$(10) for instance
; and can be treated as a simple string.
; proceed with multi-dimensioned string arrays in runtime.
ex de,hl ; save pointer to dimensions in DE
rst 0x18 ; GET-CHAR looks at the BASIC line
cp 0x28 ; is character '(' ?
jr nz,REPORT_3 ; to REPORT-3 if not
; 'Subscript wrong'
ex de,hl ; dimensions pointer to HL to synchronize
; with next instruction.
; runtime numeric arrays path rejoins here.
;; SV-PTR
SV_PTR:
ex de,hl ; save dimension pointer in DE
jr SV_COUNT ; forward to SV-COUNT with true no of dims
; in B. As there is no initial comma the
; loop is entered at the midpoint.
; ----------------------------------------------------------
; the dimension counting loop which is entered at mid-point.
;; SV-COMMA
SV_COMMA:
push hl ; save counter
rst 0x18 ; GET-CHAR
pop hl ; pop counter
cp 0x2C ; is character ',' ?
jr z,SV_LOOP ; forward to SV-LOOP if so
; in runtime the variable definition indicates a comma should appear here
bit 7,c ; checking syntax ?
jr z,REPORT_3 ; forward to REPORT-3 if not
; 'Subscript error'
; proceed if checking syntax of an array?
bit 6,c ; array of strings
jr nz,SV_CLOSE ; forward to SV-CLOSE if so
; an array of numbers.
cp 0x29 ; is character ')' ?
jr nz,SV_RPT_C ; forward to SV-RPT-C if not
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR moves CH-ADD past the statement
ret ; return ->
; ---
; the branch was here with an array of strings.
;; SV-CLOSE
SV_CLOSE:
cp 0x29 ; as above ')' could follow the expression
jr z,SV_DIM ; forward to SV-DIM if so
cp 0xCC ; is it 'TO' ?
jr nz,SV_RPT_C ; to SV-RPT-C with anything else
; 'Nonsense in BASIC'
; now backtrack CH_ADD to set up for slicing routine.
; Note. in a BASIC line we can safely backtrack to a colour parameter.
;; SV-CH-ADD
SV_CH_ADD:
rst 0x18 ; GET-CHAR
dec hl ; backtrack HL
ld (CH_ADD),hl ; to set CH_ADD up for slicing routine
jr SV_SLICE ; forward to SV-SLICE and make a return
; when all slicing complete.
; ----------------------------------------
; -> the mid-point entry point of the loop
;; SV-COUNT
SV_COUNT:
ld hl,0x0000 ; initialize data pointer to zero.
;; SV-LOOP
SV_LOOP:
push hl ; save the data pointer.
rst 0x20 ; NEXT-CHAR in BASIC area points to an
; expression.
pop hl ; restore the data pointer.
ld a,c ; transfer name/type to A.
cp 0xC0 ; is it 11000000 ?
; Note. the letter component is absent if
; syntax checking.
jr nz,SV_MULT ; forward to SV-MULT if not an array of
; strings.
; proceed to check string arrays during syntax.
rst 0x18 ; GET-CHAR
cp 0x29 ; ')' end of subscripts ?
jr z,SV_DIM ; forward to SV-DIM to consider further slice
cp 0xCC ; is it 'TO' ?
jr z,SV_CH_ADD ; back to SV-CH-ADD to consider a slice.
; (no need to repeat get-char at L29E0)
; if neither, then an expression is required so rejoin runtime loop ??
; registers HL and DE only point to somewhere meaningful in runtime so
; comments apply to that situation.
;; SV-MULT
SV_MULT:
push bc ; save dimension number.
push hl ; push data pointer/rubbish.
; DE points to current dimension.
call DE__DE_1_ ; routine DE,(DE+1) gets next dimension in DE
; and HL points to it.
ex (sp),hl ; dim pointer to stack, data pointer to HL (*)
ex de,hl ; data pointer to DE, dim size to HL.
call INT_EXP1 ; routine INT-EXP1 checks integer expression
; and gets result in BC in runtime.
jr c,REPORT_3 ; to REPORT-3 if > HL
; 'Subscript out of range'
dec bc ; adjust returned result from 1-x to 0-x
call GET_HL_DE ; routine GET-HL*DE multiplies data pointer by
; dimension size.
add hl,bc ; add the integer returned by expression.
pop de ; pop the dimension pointer. ***
pop bc ; pop dimension counter.
djnz SV_COMMA ; back to SV-COMMA if more dimensions
; Note. during syntax checking, unless there
; are more than 256 subscripts, the branch
; back to SV-COMMA is always taken.
bit 7,c ; are we checking syntax ?
; then we've got a joker here.
;; SV-RPT-C
SV_RPT_C:
jr nz,SL_RPT_C ; forward to SL-RPT-C if so
; 'Nonsense in BASIC'
; more than 256 subscripts in BASIC line.
; but in runtime the number of subscripts are at least the same as dims
push hl ; save data pointer.
bit 6,c ; is it a string array ?
jr nz,SV_ELEM_ ; forward to SV-ELEM$ if so.
; a runtime numeric array subscript.
ld bc,de ; register DE has advanced past all dimensions
; and points to start of data in variable.
; transfer it to BC.
rst 0x18 ; GET-CHAR checks BASIC line
cp 0x29 ; must be a ')' ?
jr z,SV_NUMBER ; skip to SV-NUMBER if so
; else more subscripts in BASIC line than the variable definition.
;; REPORT-3
REPORT_3:
rst 0x08 ; ERROR-1
defb 0x02 ; Error Report: Subscript wrong
; continue if subscripts matched the numeric array.
;; SV-NUMBER
SV_NUMBER:
rst 0x20 ; NEXT-CHAR moves CH_ADD to next statement
; - finished parsing.
pop hl ; pop the data pointer.
ld de,0x0005 ; each numeric element is 5 bytes.
call GET_HL_DE ; routine GET-HL*DE multiplies.
add hl,bc ; now add to start of data in the variable.
ret ; return with HL pointing at the numeric
; array subscript. ->
; ---------------------------------------------------------------
; the branch was here for string subscripts when the number of subscripts
; in the BASIC line was one less than in variable definition.
;; SV-ELEM$
SV_ELEM_:
call DE__DE_1_ ; routine DE,(DE+1) gets final dimension
; the length of strings in this array.
ex (sp),hl ; start pointer to stack, data pointer to HL.
call GET_HL_DE ; routine GET-HL*DE multiplies by element
; size.
pop bc ; the start of data pointer is added
add hl,bc ; in - now points to location before.
inc hl ; point to start of required string.
ld bc,de ; transfer the length (final dimension size)
; from DE to BC.
ex de,hl ; put start in DE.
call STK_ST_0 ; routine STK-ST-0 stores the string parameters
; with A=0 - a slice or subscript.
; now check that there were no more subscripts in the BASIC line.
rst 0x18 ; GET-CHAR
cp 0x29 ; is it ')' ?
jr z,SV_DIM ; forward to SV-DIM to consider a separate
; subscript or/and a slice.
cp 0x2C ; a comma is allowed if the final subscript
; is to be sliced e.g. a$(2,3,4 TO 6).
jr nz,REPORT_3 ; to REPORT-3 with anything else
; 'Subscript error'
;; SV-SLICE
SV_SLICE:
call SLICING ; routine SLICING slices the string.
; but a slice of a simple string can itself be sliced.
;; SV-DIM
SV_DIM:
rst 0x20 ; NEXT-CHAR
;; SV-SLICE?
SV_SLICE_:
cp 0x28 ; is character '(' ?
jr z,SV_SLICE ; loop back if so to SV-SLICE
res 6,(iy+FLAGS-IY0) ; update FLAGS - Signal string result
ret ; and return.
; ---
; The above section deals with the flexible syntax allowed.
; DIM a$(3,3,10) can be considered as two dimensional array of ten-character
; strings or a 3-dimensional array of characters.
; a$(1,1) will return a 10-character string as will a$(1,1,1 TO 10)
; a$(1,1,1) will return a single character.
; a$(1,1) (1 TO 6) is the same as a$(1,1,1 TO 6)
; A slice can itself be sliced ad infinitum
; b$ () () () () () () (2 TO 10) (2 TO 9) (3) is the same as b$(5)
; -------------------------
; Handle slicing of strings
; -------------------------
; The syntax of string slicing is very natural and it is as well to reflect
; on the permutations possible.
; a$() and a$( TO ) indicate the entire string although just a$ would do
; and would avoid coming here.
; h$(16) indicates the single character at position 16.
; a$( TO 32) indicates the first 32 characters.
; a$(257 TO) indicates all except the first 256 characters.
; a$(19000 TO 19999) indicates the thousand characters at position 19000.
; Also a$(9 TO 5) returns a null string not an error.
; This enables a$(2 TO) to return a null string if the passed string is
; of length zero or 1.
; A string expression in brackets can be sliced. e.g. (STR$ PI) (3 TO )
; We arrived here from SCANNING with CH-ADD pointing to the initial '('
; or from above.
;; SLICING
SLICING:
call SYNTAX_Z ; routine SYNTAX-Z
call nz,STK_FETCH ; routine STK-FETCH fetches parameters of
; string at runtime, start in DE, length
; in BC. This could be an array subscript.
rst 0x20 ; NEXT-CHAR
cp 0x29 ; is it ')' ? e.g. a$()
jr z,SL_STORE ; forward to SL-STORE to store entire string.
push de ; else save start address of string
xor a ; clear accumulator to use as a running flag.
push af ; and save on stack before any branching.
push bc ; save length of string to be sliced.
ld de,0x0001 ; default the start point to position 1.
rst 0x18 ; GET-CHAR
pop hl ; pop length to HL as default end point
; and limit.
cp 0xCC ; is it 'TO' ? e.g. a$( TO 10000)
jr z,SL_SECOND ; to SL-SECOND to evaluate second parameter.
pop af ; pop the running flag.
call INT_EXP2 ; routine INT-EXP2 fetches first parameter.
push af ; save flag (will be $FF if parameter>limit)
ld de,bc ; transfer the start
; to DE overwriting 0001.
push hl ; save original length.
rst 0x18 ; GET-CHAR
pop hl ; pop the limit length.
cp 0xCC ; is it 'TO' after a start ?
jr z,SL_SECOND ; to SL-SECOND to evaluate second parameter
cp 0x29 ; is it ')' ? e.g. a$(365)
;; SL-RPT-C
SL_RPT_C:
jp nz,REPORT_C ; jump to REPORT-C with anything else
; 'Nonsense in BASIC'
ld hl,de ; copy start
; to end - just a one character slice.
jr SL_DEFINE ; forward to SL-DEFINE.
; ---------------------
;; SL-SECOND
SL_SECOND:
push hl ; save limit length.
rst 0x20 ; NEXT-CHAR
pop hl ; pop the length.
cp 0x29 ; is character ')' ? e.g. a$(7 TO )
jr z,SL_DEFINE ; to SL-DEFINE using length as end point.
pop af ; else restore flag.
call INT_EXP2 ; routine INT-EXP2 gets second expression.
push af ; save the running flag.
rst 0x18 ; GET-CHAR
ld hl,bc ; transfer second parameter
; to HL. e.g. a$(42 to 99)
cp 0x29 ; is character a ')' ?
jr nz,SL_RPT_C ; to SL-RPT-C if not
; 'Nonsense in BASIC'
; we now have start in DE and an end in HL.
;; SL-DEFINE
SL_DEFINE:
pop af ; pop the running flag.
ex (sp),hl ; put end point on stack, start address to HL
add hl,de ; add address of string to the start point.
dec hl ; point to first character of slice.
ex (sp),hl ; start address to stack, end point to HL (*)
and a ; prepare to subtract.
sbc hl,de ; subtract start point from end point.
ld bc,0x0000 ; default the length result to zero.
jr c,SL_OVER ; forward to SL-OVER if start > end.
inc hl ; increment the length for inclusive byte.
and a ; now test the running flag.
jp m,REPORT_3 ; jump back to REPORT-3 if $FF.
; 'Subscript out of range'
ld bc,hl ; transfer the length
; to BC.
;; SL-OVER
SL_OVER:
pop de ; restore start address from machine stack ***
res 6,(iy+FLAGS-IY0) ; update FLAGS - signal string result for
; syntax.
;; SL-STORE
SL_STORE:
call SYNTAX_Z ; routine SYNTAX-Z (UNSTACK-Z?)
ret z ; return if checking syntax.
; but continue to store the string in runtime.
; ------------------------------------
; other than from above, this routine is called from STK-VAR to stack
; a known string array element.
; ------------------------------------
;; STK-ST-0
STK_ST_0:
xor a ; clear to signal a sliced string or element.
; -------------------------
; this routine is called from chr$, scrn$ etc. to store a simple string result.
; --------------------------
;; STK-STO-$
STK_STO__:
res 6,(iy+FLAGS-IY0) ; update FLAGS - signal string result.
; and continue to store parameters of string.
; ---------------------------------------
; Pass five registers to calculator stack
; ---------------------------------------
; This subroutine puts five registers on the calculator stack.
;; STK-STORE
STK_STORE:
push bc ; save two registers
call TEST_5_SP ; routine TEST-5-SP checks room and puts 5
; in BC.
pop bc ; fetch the saved registers.
ld hl,(STKEND) ; make HL point to first empty location STKEND
ldi (hl),a ; place the 5 registers.
ldi (hl),de
ldi (hl),bc
ld (STKEND),hl ; update system variable STKEND.
ret ; and return.
; -------------------------------------------
; Return result of evaluating next expression
; -------------------------------------------
; This clever routine is used to check and evaluate an integer expression
; which is returned in BC, setting A to $FF, if greater than a limit supplied
; in HL. It is used to check array subscripts, parameters of a string slice
; and the arguments of the DIM command. In the latter case, the limit check
; is not required and H is set to $FF. When checking optional string slice
; parameters, it is entered at the second entry point so as not to disturb
; the running flag A, which may be $00 or $FF from a previous invocation.
;; INT-EXP1
INT_EXP1:
xor a ; set result flag to zero.
; -> The entry point is here if A is used as a running flag.
;; INT-EXP2
INT_EXP2:
push de ; preserve DE register throughout.
push hl ; save the supplied limit.
push af ; save the flag.
call EXPT_1NUM ; routine EXPT-1NUM evaluates expression
; at CH_ADD returning if numeric result,
; with value on calculator stack.
pop af ; pop the flag.
call SYNTAX_Z ; routine SYNTAX-Z
jr z,I_RESTORE ; forward to I-RESTORE if checking syntax so
; avoiding a comparison with supplied limit.
push af ; save the flag.
call FIND_INT2 ; routine FIND-INT2 fetches value from
; calculator stack to BC producing an error
; if too high.
pop de ; pop the flag to D.
ld a,b ; test value for zero and reject
or c ; as arrays and strings begin at 1.
scf ; set carry flag.
jr z,I_CARRY ; forward to I-CARRY if zero.
pop hl ; restore the limit.
push hl ; and save.
and a ; prepare to subtract.
sbc hl,bc ; subtract value from limit.
;; I-CARRY
I_CARRY:
ld a,d ; move flag to accumulator $00 or $FF.
sbc a,0x00 ; will set to $FF if carry set.
;; I-RESTORE
I_RESTORE:
pop hl ; restore the limit.
pop de ; and DE register.
ret ; return.
; -----------------------
; LD DE,(DE+1) Subroutine
; -----------------------
; This routine just loads the DE register with the contents of the two
; locations following the location addressed by DE.
; It is used to step along the 16-bit dimension sizes in array definitions.
; Note. Such code is made into subroutines to make programs easier to
; write and it would use less space to include the five instructions in-line.
; However, there are so many exchanges going on at the places this is invoked
; that to implement it in-line would make the code hard to follow.
; It probably had a zippier label though as the intention is to simplify the
; program.
;; DE,(DE+1)
DE__DE_1_:
ex de,hl
inc hl
ldi e,(hl)
ld d,(hl)
ret
; -------------------
; HL=HL*DE Subroutine
; -------------------
; This routine calls the mathematical routine to multiply HL by DE in runtime.
; It is called from STK-VAR and from DIM. In the latter case syntax is not
; being checked so the entry point could have been at the second CALL
; instruction to save a few clock-cycles.
;; GET-HL*DE
GET_HL_DE:
call SYNTAX_Z ; routine SYNTAX-Z.
ret z ; return if checking syntax.
call HL_HL_DE ; routine HL-HL*DE.
jp c,REPORT_4 ; jump back to REPORT-4 if over 65535.
ret ; else return with 16-bit result in HL.
; -----------------
; THE 'LET' COMMAND
; -----------------
; Sinclair BASIC adheres to the ANSI-78 standard and a LET is required in
; assignments e.g. LET a = 1 : LET h$ = "hat".
;
; Long names may contain spaces but not colour controls (when assigned).
; a substring can appear to the left of the equals sign.
; An earlier mathematician Lewis Carroll may have been pleased that
; 10 LET Babies cannot manage crocodiles = Babies are illogical AND
; Nobody is despised who can manage a crocodile AND Illogical persons
; are despised
; does not give the 'Nonsense..' error if the three variables exist.
; I digress.
;; LET
LET:
ld hl,(DEST) ; fetch system variable DEST to HL.
bit 1,(iy+FLAGX-IY0) ; test FLAGX - handling a new variable ?
jr z,L_EXISTS ; forward to L-EXISTS if not.
; continue for a new variable. DEST points to start in BASIC line.
; from the CLASS routines.
ld bc,0x0005 ; assume numeric and assign an initial 5 bytes
;; L-EACH-CH
L_EACH_CH:
inc bc ; increase byte count for each relevant
; character
;; L-NO-SP
L_NO_SP:
inc hl ; increase pointer.
ld a,(hl) ; fetch character.
cp 0x20 ; is it a space ?
jr z,L_NO_SP ; back to L-NO-SP is so.
jr nc,L_TEST_CH ; forward to L-TEST-CH if higher.
cp 0x10 ; is it $00 - $0F ?
jr c,L_SPACES ; forward to L-SPACES if so.
cp 0x16 ; is it $16 - $1F ?
jr nc,L_SPACES ; forward to L-SPACES if so.
; it was $10 - $15 so step over a colour code.
inc hl ; increase pointer.
jr L_NO_SP ; loop back to L-NO-SP.
; ---
; the branch was to here if higher than space.
;; L-TEST-CH
L_TEST_CH:
call ALPHANUM ; routine ALPHANUM sets carry if alphanumeric
jr c,L_EACH_CH ; loop back to L-EACH-CH for more if so.
cp 0x24 ; is it '$' ?
jp z,L_NEW_ ; jump forward if so, to L-NEW$
; with a new string.
;; L-SPACES
L_SPACES:
ld a,c ; save length lo in A.
ld hl,(E_LINE) ; fetch E_LINE to HL.
dec hl ; point to location before, the variables
; end-marker.
call MAKE_ROOM ; routine MAKE-ROOM creates BC spaces
; for name and numeric value.
inc hl ; advance to first new location.
inc hl ; then to second.
ex de,hl ; set DE to second location.
push de ; save this pointer.
ld hl,(DEST) ; reload HL with DEST.
dec de ; point to first.
sub 0x06 ; subtract six from length_lo.
ld b,a ; save count in B.
jr z,L_SINGLE ; forward to L-SINGLE if it was just
; one character.
; HL points to start of variable name after 'LET' in BASIC line.
;; L-CHAR
L_CHAR:
inc hl ; increase pointer.
ld a,(hl) ; pick up character.
cp 0x21 ; is it space or higher ?
jr c,L_CHAR ; back to L-CHAR with space and less.
or 0x20 ; make variable lower-case.
inc de ; increase destination pointer.
ld (de),a ; and load to edit line.
djnz L_CHAR ; loop back to L-CHAR until B is zero.
or 0x80 ; invert the last character.
ld (de),a ; and overwrite that in edit line.
; now consider first character which has bit 6 set
ld a,0xC0 ; set A 11000000 is xor mask for a long name.
; %101 is xor/or result
; single character numerics rejoin here with %00000000 in mask.
; %011 will be xor/or result
;; L-SINGLE
L_SINGLE:
ld hl,(DEST) ; fetch DEST - HL addresses first character.
xor (hl) ; apply variable type indicator mask (above).
or 0x20 ; make lowercase - set bit 5.
pop hl ; restore pointer to 2nd character.
call L_FIRST ; routine L-FIRST puts A in first character.
; and returns with HL holding
; new E_LINE-1 the $80 vars end-marker.
;; L-NUMERIC
L_NUMERIC:
push hl ; save the pointer.
; the value of variable is deleted but remains after calculator stack.
rst 0x28 ; ; FP-CALC
defb 0x02 ; ;delete ; delete variable value
defb 0x38 ; ;end-calc
; DE (STKEND) points to start of value.
pop hl ; restore the pointer.
ld bc,0x0005 ; start of number is five bytes before.
and a ; prepare for true subtraction.
sbc hl,bc ; HL points to start of value.
jr L_ENTER ; forward to L-ENTER ==>
; ---
; the jump was to here if the variable already existed.
;; L-EXISTS
L_EXISTS:
bit 6,(iy+FLAGS-IY0) ; test FLAGS - numeric or string result ?
jr z,L_DELETE_ ; skip forward to L-DELETE$ -*->
; if string result.
; A numeric variable could be simple or an array element.
; They are treated the same and the old value is overwritten.
ld de,0x0006 ; six bytes forward points to loc past value.
add hl,de ; add to start of number.
jr L_NUMERIC ; back to L-NUMERIC to overwrite value.
; ---
; -*-> the branch was here if a string existed.
;; L-DELETE$
L_DELETE_:
ld hl,(DEST) ; fetch DEST to HL.
; (still set from first instruction)
ld bc,(STRLEN) ; fetch STRLEN to BC.
bit 0,(iy+FLAGX-IY0) ; test FLAGX - handling a complete simple
; string ?
jr nz,L_ADD_ ; forward to L-ADD$ if so.
; must be a string array or a slice in workspace.
; Note. LET a$(3 TO 6) = h$ will assign "hat " if h$ = "hat"
; and "hats" if h$ = "hatstand".
;
; This is known as Procrustean lengthening and shortening after a
; character Procrustes in Greek legend who made travellers sleep in his bed,
; cutting off their feet or stretching them so they fitted the bed perfectly.
; The bloke was hatstand and slain by Theseus.
ld a,b ; test if length
or c ; is zero and
ret z ; return if so.
push hl ; save pointer to start.
rst 0x30 ; BC-SPACES creates room.
push de ; save pointer to first new location.
push bc ; and length (*)
ld de,hl ; set DE to point to last location.
inc hl ; set HL to next location.
ld (hl),0x20 ; place a space there.
lddr ; copy bytes filling with spaces.
push hl ; save pointer to start.
call STK_FETCH ; routine STK-FETCH start to DE,
; length to BC.
pop hl ; restore the pointer.
ex (sp),hl ; (*) length to HL, pointer to stack.
and a ; prepare for true subtraction.
sbc hl,bc ; subtract old length from new.
add hl,bc ; and add back.
jr nc,L_LENGTH ; forward if it fits to L-LENGTH.
ld bc,hl ; otherwise set
; length to old length.
; "hatstand" becomes "hats"
;; L-LENGTH
L_LENGTH:
ex (sp),hl ; (*) length to stack, pointer to HL.
ex de,hl ; pointer to DE, start of string to HL.
ld a,b ; is the length zero ?
or c
jr z,L_IN_W_S ; forward to L-IN-W/S if so
; leaving prepared spaces.
ldir ; else copy bytes overwriting some spaces.
;; L-IN-W/S
L_IN_W_S:
pop bc ; pop the new length. (*)
pop de ; pop pointer to new area.
pop hl ; pop pointer to variable in assignment.
; and continue copying from workspace
; to variables area.
; ==> branch here from L-NUMERIC
;; L-ENTER
L_ENTER:
ex de,hl ; exchange pointers HL=STKEND DE=end of vars.
ld a,b ; test the length
or c ; and make a
ret z ; return if zero (strings only).
push de ; save start of destination.
ldir ; copy bytes.
pop hl ; address the start.
ret ; and return.
; ---
; the branch was here from L-DELETE$ if an existing simple string.
; register HL addresses start of string in variables area.
;; L-ADD$
L_ADD_:
dec hl ; point to high byte of length.
dec hl ; to low byte.
dec hl ; to letter.
ld a,(hl) ; fetch masked letter to A.
push hl ; save the pointer on stack.
push bc ; save new length.
call L_STRING ; routine L-STRING adds new string at end
; of variables area.
; if no room we still have old one.
pop bc ; restore length.
pop hl ; restore start.
inc bc ; increase
inc bc ; length by three
inc bc ; to include character and length bytes.
jp RECLAIM_2 ; jump to indirect exit via RECLAIM-2
; deleting old version and adjusting pointers.
; ---
; the jump was here with a new string variable.
;; L-NEW$
L_NEW_:
ld a,0xDF ; indicator mask %11011111 for
; %010xxxxx will be result
ld hl,(DEST) ; address DEST first character.
and (hl) ; combine mask with character.
;; L-STRING
L_STRING:
push af ; save first character and mask.
call STK_FETCH ; routine STK-FETCH fetches parameters of
; the string.
ex de,hl ; transfer start to HL.
add hl,bc ; add to length.
push bc ; save the length.
dec hl ; point to end of string.
ld (DEST),hl ; save pointer in DEST.
; (updated by POINTERS if in workspace)
inc bc ; extra byte for letter.
inc bc ; two bytes
inc bc ; for the length of string.
ld hl,(E_LINE) ; address E_LINE.
dec hl ; now end of VARS area.
call MAKE_ROOM ; routine MAKE-ROOM makes room for string.
; updating pointers including DEST.
ld hl,(DEST) ; pick up pointer to end of string from DEST.
pop bc ; restore length from stack.
push bc ; and save again on stack.
inc bc ; add a byte.
lddr ; copy bytes from end to start.
ex de,hl ; HL addresses length low
inc hl ; increase to address high byte
pop bc ; restore length to BC
ldd (hl),b ; insert high byte
; address low byte location
ld (hl),c ; insert that byte
pop af ; restore character and mask
;; L-FIRST
L_FIRST:
dec hl ; address variable name
ld (hl),a ; and insert character.
ld hl,(E_LINE) ; load HL with E_LINE.
dec hl ; now end of VARS area.
ret ; return
; ------------------------------------
; Get last value from calculator stack
; ------------------------------------
;
;
;; STK-FETCH
STK_FETCH:
ld hl,(STKEND) ; STKEND
dec hl
ldd b,(hl)
ldd c,(hl)
ldd d,(hl)
ldd e,(hl)
ld a,(hl)
ld (STKEND),hl ; STKEND
ret
; ------------------
; Handle DIM command
; ------------------
; e.g. DIM a(2,3,4,7): DIM a$(32) : DIM b$(20,2,768) : DIM c$(20000)
; the only limit to dimensions is memory so, for example,
; DIM a(2,2,2,2,2,2,2,2,2,2,2,2,2) is possible and creates a multi-
; dimensional array of zeros. String arrays are initialized to spaces.
; It is not possible to erase an array, but it can be re-dimensioned to
; a minimal size of 1, after use, to free up memory.
;; DIM
DIM:
call LOOK_VARS ; routine LOOK-VARS
;; D-RPORT-C
D_RPORT_C:
jp nz,REPORT_C ; jump to REPORT-C if a long-name variable.
; DIM lottery numbers(49) doesn't work.
call SYNTAX_Z ; routine SYNTAX-Z
jr nz,D_RUN ; forward to D-RUN in runtime.
res 6,c ; signal 'numeric' array even if string as
; this simplifies the syntax checking.
call STK_VAR ; routine STK-VAR checks syntax.
call CHECK_END ; routine CHECK-END performs early exit ->
; the branch was here in runtime.
;; D-RUN
D_RUN:
jr c,D_LETTER ; skip to D-LETTER if variable did not exist.
; else reclaim the old one.
push bc ; save type in C.
call NEXT_ONE ; routine NEXT-ONE find following variable
; or position of $80 end-marker.
call RECLAIM_2 ; routine RECLAIM-2 reclaims the
; space between.
pop bc ; pop the type.
;; D-LETTER
D_LETTER:
set 7,c ; signal array.
ld b,0x00 ; initialize dimensions to zero and
push bc ; save with the type.
ld hl,0x0001 ; make elements one character presuming string
bit 6,c ; is it a string ?
jr nz,D_SIZE ; forward to D-SIZE if so.
ld l,0x05 ; make elements 5 bytes as is numeric.
;; D-SIZE
D_SIZE:
ex de,hl ; save the element size in DE.
; now enter a loop to parse each of the integers in the list.
;; D-NO-LOOP
D_NO_LOOP:
rst 0x20 ; NEXT-CHAR
ld h,0xFF ; disable limit check by setting HL high
call INT_EXP1 ; routine INT-EXP1
jp c,REPORT_3 ; to REPORT-3 if > 65280 and then some
; 'Subscript out of range'
pop hl ; pop dimension counter, array type
push bc ; save dimension size ***
inc h ; increment the dimension counter
push hl ; save the dimension counter
ld hl,bc ; transfer size
; to HL
call GET_HL_DE ; routine GET-HL*DE multiplies dimension by
; running total of size required initially
; 1 or 5.
ex de,hl ; save running total in DE
rst 0x18 ; GET-CHAR
cp 0x2C ; is it ',' ?
jr z,D_NO_LOOP ; loop back to D-NO-LOOP until all dimensions
; have been considered
; when loop complete continue.
cp 0x29 ; is it ')' ?
jr nz,D_RPORT_C ; to D-RPORT-C with anything else
; 'Nonsense in BASIC'
rst 0x20 ; NEXT-CHAR advances to next statement/CR
pop bc ; pop dimension counter/type
ld a,c ; type to A
; now calculate space required for array variable
ld l,b ; dimensions to L since these require 16 bits
; then this value will be doubled
ld h,0x00 ; set high byte to zero
; another four bytes are required for letter(1), total length(2), number of
; dimensions(1) but since we have yet to double allow for two
inc hl ; increment
inc hl ; increment
add hl,hl ; now double giving 4 + dimensions * 2
add hl,de ; add to space required for array contents
jp c,REPORT_4 ; to REPORT-4 if > 65535
; 'Out of memory'
push de ; save data space
push bc ; save dimensions/type
push hl ; save total space
ld bc,hl ; total space
; to BC
ld hl,(E_LINE) ; address E_LINE - first location after
; variables area
dec hl ; point to location before - the $80 end-marker
call MAKE_ROOM ; routine MAKE-ROOM creates the space if
; memory is available.
inc hl ; point to first new location and
ld (hl),a ; store letter/type
pop bc ; pop total space
dec bc ; exclude name
dec bc ; exclude the 16-bit
dec bc ; counter itself
inc hl ; point to next location the 16-bit counter
ldi (hl),c ; insert low byte
; address next
ld (hl),b ; insert high byte
pop bc ; pop the number of dimensions.
ld a,b ; dimensions to A
inc hl ; address next
ld (hl),a ; and insert "No. of dims"
ld hl,de ; transfer DE space + 1 from make-room
; to HL
dec de ; set DE to next location down.
ld (hl),0x00 ; presume numeric and insert a zero
bit 6,c ; test bit 6 of C. numeric or string ?
jr z,DIM_CLEAR ; skip to DIM-CLEAR if numeric
ld (hl),0x20 ; place a space character in HL
;; DIM-CLEAR
DIM_CLEAR:
pop bc ; pop the data length
lddr ; LDDR sets to zeros or spaces
; The number of dimensions is still in A.
; A loop is now entered to insert the size of each dimension that was pushed
; during the D-NO-LOOP working downwards from position before start of data.
;; DIM-SIZES
DIM_SIZES:
pop bc ; pop a dimension size ***
ldd (hl),b ; insert high byte at position
; next location down
ldd (hl),c ; insert low byte
; next location down
dec a ; decrement dimension counter
jr nz,DIM_SIZES ; back to DIM-SIZES until all done.
ret ; return.
; -----------------------------
; Check whether digit or letter
; -----------------------------
; This routine checks that the character in A is alphanumeric
; returning with carry set if so.
;; ALPHANUM
ALPHANUM:
call NUMERIC ; routine NUMERIC will reset carry if so.
ccf ; Complement Carry Flag
ret c ; Return if numeric else continue into
; next routine.
; This routine checks that the character in A is alphabetic
;; ALPHA
ALPHA:
cp 0x41 ; less than 'A' ?
ccf ; Complement Carry Flag
ret nc ; return if so
cp 0x5B ; less than 'Z'+1 ?
ret c ; is within first range
cp 0x61 ; less than 'a' ?
ccf ; Complement Carry Flag
ret nc ; return if so.
cp 0x7B ; less than 'z'+1 ?
ret ; carry set if within a-z.
; -------------------------
; Decimal to floating point
; -------------------------
; This routine finds the floating point number represented by an expression
; beginning with BIN, '.' or a digit.
; Note that BIN need not have any '0's or '1's after it.
; BIN is really just a notational symbol and not a function.
;; DEC-TO-FP
DEC_TO_FP:
cp 0xC4 ; 'BIN' token ?
jr nz,NOT_BIN ; to NOT-BIN if not
ld de,0x0000 ; initialize 16 bit buffer register.
;; BIN-DIGIT
BIN_DIGIT:
rst 0x20 ; NEXT-CHAR
sub 0x31 ; '1'
adc a,0x00 ; will be zero if '1' or '0'
; carry will be set if was '0'
jr nz,BIN_END ; forward to BIN-END if result not zero
ex de,hl ; buffer to HL
ccf ; Carry now set if originally '1'
adc hl,hl ; shift the carry into HL
jp c,REPORT_6 ; to REPORT-6 if overflow - too many digits
; after first '1'. There can be an unlimited
; number of leading zeros.
; 'Number too big' - raise an error
ex de,hl ; save the buffer
jr BIN_DIGIT ; back to BIN-DIGIT for more digits
; ---
;; BIN-END
BIN_END:
ld bc,de ; transfer 16 bit buffer
; to BC register pair.
jp STACK_BC ; JUMP to STACK-BC to put on calculator stack
; ---
; continue here with .1, 42, 3.14, 5., 2.3 E -4
;; NOT-BIN
NOT_BIN:
cp 0x2E ; '.' - leading decimal point ?
jr z,DECIMAL ; skip to DECIMAL if so.
call INT_TO_FP ; routine INT-TO-FP to evaluate all digits
; This number 'x' is placed on stack.
cp 0x2E ; '.' - mid decimal point ?
jr nz,E_FORMAT ; to E-FORMAT if not to consider that format
rst 0x20 ; NEXT-CHAR
call NUMERIC ; routine NUMERIC returns carry reset if 0-9
jr c,E_FORMAT ; to E-FORMAT if not a digit e.g. '1.'
jr DEC_STO_1 ; to DEC-STO-1 to add the decimal part to 'x'
; ---
; a leading decimal point has been found in a number.
;; DECIMAL
DECIMAL:
rst 0x20 ; NEXT-CHAR
call NUMERIC ; routine NUMERIC will reset carry if digit
;; DEC-RPT-C
DEC_RPT_C:
jp c,REPORT_C ; to REPORT-C if just a '.'
; raise 'Nonsense in BASIC'
; since there is no leading zero put one on the calculator stack.
rst 0x28 ; ; FP-CALC
defb 0xA0 ; ;stk-zero ; 0.
defb 0x38 ; ;end-calc
; If rejoining from earlier there will be a value 'x' on stack.
; If continuing from above the value zero.
; Now store 1 in mem-0.
; Note. At each pass of the digit loop this will be divided by ten.
;; DEC-STO-1
DEC_STO_1:
rst 0x28 ; ; FP-CALC
defb 0xA1 ; ;stk-one ;x or 0,1.
defb 0xC0 ; ;st-mem-0 ;x or 0,1.
defb 0x02 ; ;delete ;x or 0.
defb 0x38 ; ;end-calc
;; NXT-DGT-1
NXT_DGT_1:
rst 0x18 ; GET-CHAR
call STK_DIGIT ; routine STK-DIGIT stacks single digit 'd'
jr c,E_FORMAT ; exit to E-FORMAT when digits exhausted >
rst 0x28 ; ; FP-CALC ;x or 0,d. first pass.
defb 0xE0 ; ;get-mem-0 ;x or 0,d,1.
defb 0xA4 ; ;stk-ten ;x or 0,d,1,10.
defb 0x05 ; ;division ;x or 0,d,1/10.
defb 0xC0 ; ;st-mem-0 ;x or 0,d,1/10.
defb 0x04 ; ;multiply ;x or 0,d/10.
defb 0x0F ; ;addition ;x or 0 + d/10.
defb 0x38 ; ;end-calc last value.
rst 0x20 ; NEXT-CHAR moves to next character
jr NXT_DGT_1 ; back to NXT-DGT-1
; ---
; although only the first pass is shown it can be seen that at each pass
; the new less significant digit is multiplied by an increasingly smaller
; factor (1/100, 1/1000, 1/10000 ... ) before being added to the previous
; last value to form a new last value.
; Finally see if an exponent has been input.
;; E-FORMAT
E_FORMAT:
cp 0x45 ; is character 'E' ?
jr z,SIGN_FLAG ; to SIGN-FLAG if so
cp 0x65 ; 'e' is acceptable as well.
ret nz ; return as no exponent.
;; SIGN-FLAG
SIGN_FLAG:
ld b,0xFF ; initialize temporary sign byte to $FF
rst 0x20 ; NEXT-CHAR
cp 0x2B ; is character '+' ?
jr z,SIGN_DONE ; to SIGN-DONE
cp 0x2D ; is character '-' ?
jr nz,ST_E_PART ; to ST-E-PART as no sign
inc b ; set sign to zero
; now consider digits of exponent.
; Note. incidentally this is the only occasion in Spectrum BASIC when an
; expression may not be used when a number is expected.
;; SIGN-DONE
SIGN_DONE:
rst 0x20 ; NEXT-CHAR
;; ST-E-PART
ST_E_PART:
call NUMERIC ; routine NUMERIC
jr c,DEC_RPT_C ; to DEC-RPT-C if not
; raise 'Nonsense in BASIC'.
push bc ; save sign (in B)
call INT_TO_FP ; routine INT-TO-FP places exponent on stack
call FP_TO_A ; routine FP-TO-A transfers it to A
pop bc ; restore sign
jp c,REPORT_6 ; to REPORT-6 if overflow (over 255)
; raise 'Number too big'.
and a ; set flags
jp m,REPORT_6 ; to REPORT-6 if over '127'.
; raise 'Number too big'.
; 127 is still way too high and it is
; impossible to enter an exponent greater
; than 39 from the keyboard. The error gets
; raised later in E-TO-FP so two different
; error messages depending how high A is.
inc b ; $FF to $00 or $00 to $01 - expendable now.
jr z,E_FP_JUMP ; forward to E-FP-JUMP if exponent positive
neg ; Negate the exponent.
;; E-FP-JUMP
E_FP_JUMP:
jp E_TO_FP ; JUMP forward to E-TO-FP to assign to
; last value x on stack x * 10 to power A
; a relative jump would have done.
; ---------------------
; Check for valid digit
; ---------------------
; This routine checks that the ASCII character in A is numeric
; returning with carry reset if so.
;; NUMERIC
NUMERIC:
cp 0x30 ; '0'
ret c ; return if less than zero character.
cp 0x3A ; The upper test is '9'
ccf ; Complement Carry Flag
ret ; Return - carry clear if character '0' - '9'
; -----------
; Stack Digit
; -----------
; This subroutine is called from INT-TO-FP and DEC-TO-FP to stack a digit
; on the calculator stack.
;; STK-DIGIT
STK_DIGIT:
call NUMERIC ; routine NUMERIC
ret c ; return if not numeric character
sub 0x30 ; convert from ASCII to digit
; -----------------
; Stack accumulator
; -----------------
;
;
;; STACK-A
STACK_A:
ld c,a ; transfer to C
ld b,0x00 ; and make B zero
; ----------------------
; Stack BC register pair
; ----------------------
;
;; STACK-BC
STACK_BC:
ld iy,ERR_NR ; re-initialize ERR_NR
xor a ; clear to signal small integer
ld e,a ; place in E for sign
ld d,c ; LSB to D
ld c,b ; MSB to C
ld b,a ; last byte not used
call STK_STORE ; routine STK-STORE
rst 0x28 ; ; FP-CALC
defb 0x38 ; ;end-calc make HL = STKEND-5
and a ; clear carry
ret ; before returning
; -------------------------
; Integer to floating point
; -------------------------
; This routine places one or more digits found in a BASIC line
; on the calculator stack multiplying the previous value by ten each time
; before adding in the new digit to form a last value on calculator stack.
;; INT-TO-FP
INT_TO_FP:
push af ; save first character
rst 0x28 ; ; FP-CALC
defb 0xA0 ; ;stk-zero ; v=0. initial value
defb 0x38 ; ;end-calc
pop af ; fetch first character back.
;; NXT-DGT-2
NXT_DGT_2:
call STK_DIGIT ; routine STK-DIGIT puts 0-9 on stack
ret c ; will return when character is not numeric >
rst 0x28 ; ; FP-CALC ; v, d.
defb 0x01 ; ;exchange ; d, v.
defb 0xA4 ; ;stk-ten ; d, v, 10.
defb 0x04 ; ;multiply ; d, v*10.
defb 0x0F ; ;addition ; d + v*10 = newvalue
defb 0x38 ; ;end-calc ; v.
call CH_ADD_1 ; routine CH-ADD+1 get next character
jr NXT_DGT_2 ; back to NXT-DGT-2 to process as a digit
;*********************************
;** Part 9. ARITHMETIC ROUTINES **
;*********************************
; --------------------------
; E-format to floating point
; --------------------------
; This subroutine is used by the PRINT-FP routine and the decimal to FP
; routines to stack a number expressed in exponent format.
; Note. Though not used by the ROM as such, it has also been set up as
; a unary calculator literal but this will not work as the accumulator
; is not available from within the calculator.
; on entry there is a value x on the calculator stack and an exponent of ten
; in A. The required value is x + 10 ^ A
;; e-to-fp
;; E-TO-FP
E_TO_FP:
rlca ; this will set the x.
rrca ; carry if bit 7 is set
jr nc,E_SAVE ; to E-SAVE if positive.
cpl ; make negative positive
inc a ; without altering carry.
;; E-SAVE
E_SAVE:
push af ; save positive exp and sign in carry
ld hl,MEMBOT ; address MEM-0
call FP_0_1 ; routine FP-0/1
; places an integer zero, if no carry,
; else a one in mem-0 as a sign flag
rst 0x28 ; ; FP-CALC
defb 0xA4 ; ;stk-ten x, 10.
defb 0x38 ; ;end-calc
pop af ; pop the exponent.
; now enter a loop
;; E-LOOP
E_LOOP:
srl a ; 0>76543210>C
jr nc,E_TST_END ; forward to E-TST-END if no bit
push af ; save shifted exponent.
rst 0x28 ; ; FP-CALC
defb 0xC1 ; ;st-mem-1 x, 10.
defb 0xE0 ; ;get-mem-0 x, 10, (0/1).
defb 0x00 ; ;jump-true
defb 0x04 ; ;to L2D6D, E-DIVSN
defb 0x04 ; ;multiply x*10.
defb 0x33 ; ;jump
defb 0x02 ; ;to L2D6E, E-FETCH
;; E-DIVSN
E_DIVSN:
defb 0x05 ; ;division x/10.
;; E-FETCH
E_FETCH:
defb 0xE1 ; ;get-mem-1 x/10 or x*10, 10.
defb 0x38 ; ;end-calc new x, 10.
pop af ; restore shifted exponent
; the loop branched to here with no carry
;; E-TST-END
E_TST_END:
jr z,E_END ; forward to E-END if A emptied of bits
push af ; re-save shifted exponent
rst 0x28 ; ; FP-CALC
defb 0x31 ; ;duplicate new x, 10, 10.
defb 0x04 ; ;multiply new x, 100.
defb 0x38 ; ;end-calc
pop af ; restore shifted exponent
jr E_LOOP ; back to E-LOOP until all bits done.
; ---
; although only the first pass is shown it can be seen that for each set bit
; representing a power of two, x is multiplied or divided by the
; corresponding power of ten.
;; E-END
E_END:
rst 0x28 ; ; FP-CALC final x, factor.
defb 0x02 ; ;delete final x.
defb 0x38 ; ;end-calc x.
ret ; return
; -------------
; Fetch integer
; -------------
; This routine is called by the mathematical routines - FP-TO-BC, PRINT-FP,
; mult, re-stack and negate to fetch an integer from address HL.
; HL points to the stack or a location in MEM and no deletion occurs.
; If the number is negative then a similar process to that used in INT-STORE
; is used to restore the twos complement number to normal in DE and a sign
; in C.
;; INT-FETCH
INT_FETCH:
inc hl ; skip zero indicator.
ldi c,(hl) ; fetch sign to C
; address low byte
ld a,(hl) ; fetch to A
xor c ; two's complement
sub c
ld e,a ; place in E
inc hl ; address high byte
ld a,(hl) ; fetch to A
adc a,c ; two's complement
xor c
ld d,a ; place in D
ret ; return
; ------------------------
; Store a positive integer
; ------------------------
; This entry point is not used in this ROM but would
; store any integer as positive.
;; p-int-sto
p_int_sto:
ld c,0x00 ; make sign byte positive and continue
; -------------
; Store integer
; -------------
; this routine stores an integer in DE at address HL.
; It is called from mult, truncate, negate and sgn.
; The sign byte $00 +ve or $FF -ve is in C.
; If negative, the number is stored in 2's complement form so that it is
; ready to be added.
;; INT-STORE
INT_STORE:
push hl ; preserve HL
ldi (hl),0x00 ; first byte zero shows integer not exponent
ldi (hl),c ; then store the sign byte
;
; e.g. +1 -1
ld a,e ; fetch low byte 00000001 00000001
xor c ; xor sign 00000000 or 11111111
; gives 00000001 or 11111110
sub c ; sub sign 00000000 or 11111111
; gives 00000001>0 or 11111111>C
ldi (hl),a ; store 2's complement.
ld a,d ; high byte 00000000 00000000
adc a,c ; sign 00000000<0 11111111<C
; gives 00000000 or 00000000
xor c ; xor sign 00000000 11111111
ldi (hl),a ; store 2's complement.
ld (hl),0x00 ; last byte always zero for integers.
; is not used and need not be looked at when
; testing for zero but comes into play should
; an integer be converted to fp.
pop hl ; restore HL
ret ; return.
; -----------------------------
; Floating point to BC register
; -----------------------------
; This routine gets a floating point number e.g. 127.4 from the calculator
; stack to the BC register.
;; FP-TO-BC
FP_TO_BC:
rst 0x28 ; ; FP-CALC set HL to
defb 0x38 ; ;end-calc point to last value.
ld a,(hl) ; get first of 5 bytes
and a ; and test
jr z,FP_DELETE ; forward to FP-DELETE if an integer
; The value is first rounded up and then converted to integer.
rst 0x28 ; ; FP-CALC x.
defb 0xA2 ; ;stk-half x. 1/2.
defb 0x0F ; ;addition x + 1/2.
defb 0x27 ; ;int int(x + .5)
defb 0x38 ; ;end-calc
; now delete but leave HL pointing at integer
;; FP-DELETE
FP_DELETE:
rst 0x28 ; ; FP-CALC
defb 0x02 ; ;delete
defb 0x38 ; ;end-calc
push hl ; save pointer.
push de ; and STKEND.
ex de,hl ; make HL point to exponent/zero indicator
ld b,(hl) ; indicator to B
call INT_FETCH ; routine INT-FETCH
; gets int in DE sign byte to C
; but meaningless values if a large integer
xor a ; clear A
sub b ; subtract indicator byte setting carry
; if not a small integer.
bit 7,c ; test a bit of the sign byte setting zero
; if positive.
ld bc,de ; transfer int
; to BC
ld a,e ; low byte to A as a useful return value.
pop de ; pop STKEND
pop hl ; and pointer to last value
ret ; return
; if carry is set then the number was too big.
; ------------
; LOG(2^A)
; ------------
; This routine is used when printing floating point numbers to calculate
; the number of digits before the decimal point.
; first convert a one-byte signed integer to its five byte form.
;; LOG(2^A)
LOG_2_A_:
ld d,a ; store a copy of A in D.
rla ; test sign bit of A.
sbc a,a ; now $FF if negative or $00
ld e,a ; sign byte to E.
ld c,a ; and to C
xor a ; clear A
ld b,a ; and B.
call STK_STORE ; routine STK-STORE stacks number AEDCB
; so 00 00 XX 00 00 (positive) or 00 FF XX FF 00 (negative).
; i.e. integer indicator, sign byte, low, high, unused.
; now multiply exponent by log to the base 10 of two.
rst 0x28 ; ; FP-CALC
defb 0x34 ; ;stk-data .30103 (log 2)
defb 0xEF ; ;Exponent: $7F, Bytes: 4
defb 0x1A,0x20,0x9A,0x85
; ;
defb 0x04 ; ;multiply
defb 0x27 ; ;int
defb 0x38 ; ;end-calc
; -------------------
; Floating point to A
; -------------------
; this routine collects a floating point number from the stack into the
; accumulator returning carry set if not in range 0 - 255.
; Not all the calling routines raise an error with overflow so no attempt
; is made to produce an error report here.
;; FP-TO-A
FP_TO_A:
call FP_TO_BC ; routine FP-TO-BC returns with C in A also.
ret c ; return with carry set if > 65535, overflow
push af ; save the value and flags
dec b ; and test that
inc b ; the high byte is zero.
jr z,FP_A_END ; forward FP-A-END if zero
; else there has been 8-bit overflow
pop af ; retrieve the value
scf ; set carry flag to show overflow
ret ; and return.
; ---
;; FP-A-END
FP_A_END:
pop af ; restore value and success flag and
ret ; return.
; -----------------------------
; Print a floating point number
; -----------------------------
; Not a trivial task.
; Begin by considering whether to print a leading sign for negative numbers.
;; PRINT-FP
PRINT_FP:
rst 0x28 ; ; FP-CALC
defb 0x31 ; ;duplicate
defb 0x36 ; ;less-0
defb 0x00 ; ;jump-true
defb 0x0B ; ;to L2DF2, PF-NEGTVE
defb 0x31 ; ;duplicate
defb 0x37 ; ;greater-0
defb 0x00 ; ;jump-true
defb 0x0D ; ;to L2DF8, PF-POSTVE
; must be zero itself
defb 0x02 ; ;delete
defb 0x38 ; ;end-calc
ld a,0x30 ; prepare the character '0'
rst 0x10 ; PRINT-A
ret ; return. ->
; ---
;; PF-NEGTVE
PF_NEGTVE:
defb 0x2A ; ;abs
defb 0x38 ; ;end-calc
ld a,0x2D ; the character '-'
rst 0x10 ; PRINT-A
; and continue to print the now positive number.
rst 0x28 ; ; FP-CALC
;; PF-POSTVE
PF_POSTVE:
defb 0xA0 ; ;stk-zero x,0. begin by
defb 0xC3 ; ;st-mem-3 x,0. clearing a temporary
defb 0xC4 ; ;st-mem-4 x,0. output buffer to
defb 0xC5 ; ;st-mem-5 x,0. fifteen zeros.
defb 0x02 ; ;delete x.
defb 0x38 ; ;end-calc x.
exx ; in case called from 'str$' then save the
push hl ; pointer to whatever comes after
exx ; str$ as H'L' will be used.
; now enter a loop?
;; PF-LOOP
PF_LOOP:
rst 0x28 ; ; FP-CALC
defb 0x31 ; ;duplicate x,x.
defb 0x27 ; ;int x,int x.
defb 0xC2 ; ;st-mem-2 x,int x.
defb 0x03 ; ;subtract x-int x. fractional part.
defb 0xE2 ; ;get-mem-2 x-int x, int x.
defb 0x01 ; ;exchange int x, x-int x.
defb 0xC2 ; ;st-mem-2 int x, x-int x.
defb 0x02 ; ;delete int x.
defb 0x38 ; ;end-calc int x.
; mem-2 holds the fractional part.
; HL points to last value int x
ld a,(hl) ; fetch exponent of int x.
and a ; test
jr nz,PF_LARGE ; forward to PF-LARGE if a large integer
; > 65535
; continue with small positive integer components in range 0 - 65535
; if original number was say .999 then this integer component is zero.
call INT_FETCH ; routine INT-FETCH gets x in DE
; (but x is not deleted)
ld b,0x10 ; set B, bit counter, to 16d
ld a,d ; test if
and a ; high byte is zero
jr nz,PF_SAVE ; forward to PF-SAVE if 16-bit integer.
; and continue with integer in range 0 - 255.
or e ; test the low byte for zero
; i.e. originally just point something or other.
jr z,PF_SMALL ; forward if so to PF-SMALL
;
ld d,e ; transfer E to D
ld b,0x08 ; and reduce the bit counter to 8.
;; PF-SAVE
PF_SAVE:
push de ; save the part before decimal point.
exx
pop de ; and pop in into D'E'
exx
jr PF_BITS ; forward to PF-BITS
; ---------------------
; the branch was here when 'int x' was found to be zero as in say 0.5.
; The zero has been fetched from the calculator stack but not deleted and
; this should occur now. This omission leaves the stack unbalanced and while
; that causes no problems with a simple PRINT statement, it will if str$ is
; being used in an expression e.g. "2" + STR$ 0.5 gives the result "0.5"
; instead of the expected result "20.5".
; credit Tony Stratton, 1982.
; A DEFB 02 delete is required immediately on using the calculator.
;; PF-SMALL
PF_SMALL:
rst 0x28 ; ; FP-CALC int x = 0.
L2E25:
defb 0xE2 ; ;get-mem-2 int x = 0, x-int x.
defb 0x38 ; ;end-calc
ld a,(hl) ; fetch exponent of positive fractional number
sub 0x7E ; subtract
call LOG_2_A_ ; routine LOG(2^A) calculates leading digits.
ld d,a ; transfer count to D
ld a,(0x5CAC) ; fetch total MEM-5-1
sub d
ld (0x5CAC),a ; MEM-5-1
ld a,d
call E_TO_FP ; routine E-TO-FP
rst 0x28 ; ; FP-CALC
defb 0x31 ; ;duplicate
defb 0x27 ; ;int
defb 0xC1 ; ;st-mem-1
defb 0x03 ; ;subtract
defb 0xE1 ; ;get-mem-1
defb 0x38 ; ;end-calc
call FP_TO_A ; routine FP-TO-A
push hl ; save HL
ld (0x5CA1),a ; MEM-3-1
dec a
rla
sbc a,a
inc a
ld hl,0x5CAB ; address MEM-5-1 leading digit counter
ldi (hl),a ; store counter
; address MEM-5-2 total digits
add a,(hl) ; add counter to contents
ld (hl),a ; and store updated value
pop hl ; restore HL
jp PF_FRACTN ; JUMP forward to PF-FRACTN
; ---
; Note. while it would be pedantic to comment on every occasion a JP
; instruction could be replaced with a JR instruction, this applies to the
; above, which is useful if you wish to correct the unbalanced stack error
; by inserting a 'DEFB 02 delete' at L2E25, and maintain main addresses.
; the branch was here with a large positive integer > 65535 e.g. 123456789
; the accumulator holds the exponent.
;; PF-LARGE
PF_LARGE:
sub 0x80 ; make exponent positive
cp 0x1C ; compare to 28
jr c,PF_MEDIUM ; to PF-MEDIUM if integer <= 2^27
call LOG_2_A_ ; routine LOG(2^A)
sub 0x07
ld b,a
ld hl,0x5CAC ; address MEM-5-1 the leading digits counter.
add a,(hl) ; add A to contents
ld (hl),a ; store updated value.
ld a,b
neg ; negate
call E_TO_FP ; routine E-TO-FP
jr PF_LOOP ; back to PF-LOOP
; ----------------------------
;; PF-MEDIUM
PF_MEDIUM:
ex de,hl
call FETCH_TWO ; routine FETCH-TWO
exx
set 7,d
ld a,l
exx
sub 0x80
ld b,a
; the branch was here to handle bits in DE with 8 or 16 in B if small int
; and integer in D'E', 6 nibbles will accommodate 065535 but routine does
; 32-bit numbers as well from above
;; PF-BITS
PF_BITS:
sla de ; C<xxxxxxxx<0
; C<xxxxxxxx<C
exx
rl de ; C<xxxxxxxx<C
; C<xxxxxxxx<C
exx
ld hl,0x5CAA ; set HL to mem-4-5th last byte of buffer
ld c,0x05 ; set byte count to 5 - 10 nibbles
;; PF-BYTES
PF_BYTES:
ld a,(hl) ; fetch 0 or prev value
adc a,a ; shift left add in carry C<xxxxxxxx<C
daa ; Decimal Adjust Accumulator.
; if greater than 9 then the left hand
; nibble is incremented. If greater than
; 99 then adjusted and carry set.
; so if we'd built up 7 and a carry came in
; 0000 0111 < C
; 0000 1111
; daa 1 0101 which is 15 in BCD
ldd (hl),a ; put back
; work down thru mem 4
dec c ; decrease the 5 counter.
jr nz,PF_BYTES ; back to PF-BYTES until the ten nibbles rolled
djnz PF_BITS ; back to PF-BITS until 8 or 16 (or 32) done
; at most 9 digits for 32-bit number will have been loaded with digits
; each of the 9 nibbles in mem 4 is placed into ten bytes in mem-3 and mem 4
; unless the nibble is zero as the buffer is already zero.
; ( or in the case of mem-5 will become zero as a result of RLD instruction )
xor a ; clear to accept
ld hl,0x5CA6 ; address MEM-4-0 byte destination.
ld de,0x5CA1 ; address MEM-3-0 nibble source.
ld b,0x09 ; the count is 9 (not ten) as the first
; nibble is known to be blank.
rld ; shift RH nibble to left in (HL)
; A (HL)
; 0000 0000 < 0000 3210
; 0000 0000 3210 0000
; A picks up the blank nibble
ld c,0xFF ; set a flag to indicate when a significant
; digit has been encountered.
;; PF-DIGITS
PF_DIGITS:
rld ; pick up leftmost nibble from (HL)
; A (HL)
; 0000 0000 < 7654 3210
; 0000 7654 3210 0000
jr nz,PF_INSERT ; to PF-INSERT if non-zero value picked up.
dec c ; test
inc c ; flag
jr nz,PF_TEST_2 ; skip forward to PF-TEST-2 if flag still $FF
; indicating this is a leading zero.
; but if the zero is a significant digit e.g. 10 then include in digit totals.
; the path for non-zero digits rejoins here.
;; PF-INSERT
PF_INSERT:
ldi (de),a ; insert digit at destination
; increase the destination pointer
inc (iy+0x71) ; increment MEM-5-1st digit counter
inc (iy+0x72) ; increment MEM-5-2nd leading digit counter
ld c,0x00 ; set flag to zero indicating that any
; subsequent zeros are significant and not
; leading.
;; PF-TEST-2
PF_TEST_2:
bit 0,b ; test if the nibble count is even
jr z,PF_ALL_9 ; skip to PF-ALL-9 if so to deal with the
; other nibble in the same byte
inc hl ; point to next source byte if not
;; PF-ALL-9
PF_ALL_9:
djnz PF_DIGITS ; decrement the nibble count, back to PF-DIGITS
; if all nine not done.
; For 8-bit integers there will be at most 3 digits.
; For 16-bit integers there will be at most 5 digits.
; but for larger integers there could be nine leading digits.
; if nine digits complete then the last one is rounded up as the number will
; be printed using E-format notation
ld a,(0x5CAB) ; fetch digit count from MEM-5-1st
sub 0x09 ; subtract 9 - max possible
jr c,PF_MORE ; forward if less to PF-MORE
dec (iy+0x71) ; decrement digit counter MEM-5-1st to 8
ld a,0x04 ; load A with the value 4.
cp (iy+0x6F) ; compare with MEM-4-4th - the ninth digit
jr PF_ROUND ; forward to PF-ROUND
; to consider rounding.
; ---------------------------------------
; now delete int x from calculator stack and fetch fractional part.
;; PF-MORE
PF_MORE:
rst 0x28 ; ; FP-CALC int x.
defb 0x02 ; ;delete .
defb 0xE2 ; ;get-mem-2 x - int x = f.
defb 0x38 ; ;end-calc f.
;; PF-FRACTN
PF_FRACTN:
ex de,hl
call FETCH_TWO ; routine FETCH-TWO
exx
ld a,0x80
sub l
ld l,0x00
set 7,d
exx
call SHIFT_FP ; routine SHIFT-FP
;; PF-FRN-LP
PF_FRN_LP:
ld a,(iy+0x71) ; MEM-5-1st
cp 0x08
jr c,PF_FR_DGT ; to PF-FR-DGT
exx
rl d
exx
jr PF_ROUND ; to PF-ROUND
; ---
;; PF-FR-DGT
PF_FR_DGT:
ld bc,0x0200
;; PF-FR-EXX
PF_FR_EXX:
ld a,e
call CA_10_A_C ; routine CA-10*A+C
ld e,a
ld a,d
call CA_10_A_C ; routine CA-10*A+C
ld d,a
push bc
exx
pop bc
djnz PF_FR_EXX ; to PF-FR-EXX
ld hl,0x5CA1 ; MEM-3
ld a,c
ld c,(iy+0x71) ; MEM-5-1st
add hl,bc
ld (hl),a
inc (iy+0x71) ; MEM-5-1st
jr PF_FRN_LP ; to PF-FRN-LP
; ----------------
; 1) with 9 digits but 8 in mem-5-1 and A holding 4, carry set if rounding up.
; e.g.
; 999999999 is printed as 1E+9
; 100000001 is printed as 1E+8
; 100000009 is printed as 1.0000001E+8
;; PF-ROUND
PF_ROUND:
push af ; save A and flags
ld hl,0x5CA1 ; address MEM-3 start of digits
ld c,(iy+0x71) ; MEM-5-1st No. of digits to C
ld b,0x00 ; prepare to add
add hl,bc ; address last digit + 1
ld b,c ; No. of digits to B counter
pop af ; restore A and carry flag from comparison.
;; PF-RND-LP
PF_RND_LP:
dec hl ; address digit at rounding position.
ld a,(hl) ; fetch it
adc a,0x00 ; add carry from the comparison
ld (hl),a ; put back result even if $0A.
and a ; test A
jr z,PF_R_BACK ; skip to PF-R-BACK if ZERO?
cp 0x0A ; compare to 'ten' - overflow
ccf ; complement carry flag so that set if ten.
jr nc,PF_COUNT ; forward to PF-COUNT with 1 - 9.
;; PF-R-BACK
PF_R_BACK:
djnz PF_RND_LP ; loop back to PF-RND-LP
; if B counts down to zero then we've rounded right back as in 999999995.
; and the first 8 locations all hold $0A.
ld (hl),0x01 ; load first location with digit 1.
inc b ; make B hold 1 also.
; could save an instruction byte here.
inc (iy+0x72) ; make MEM-5-2nd hold 1.
; and proceed to initialize total digits to 1.
;; PF-COUNT
PF_COUNT:
ld (iy+0x71),b ; MEM-5-1st
; now balance the calculator stack by deleting it
rst 0x28 ; ; FP-CALC
defb 0x02 ; ;delete
defb 0x38 ; ;end-calc
; note if used from str$ then other values may be on the calculator stack.
; we can also restore the next literal pointer from its position on the
; machine stack.
exx
pop hl ; restore next literal pointer.
exx
ld bc,(0x5CAB) ; set C to MEM-5-1st digit counter.
; set B to MEM-5-2nd leading digit counter.
ld hl,0x5CA1 ; set HL to start of digits at MEM-3-1
ld a,b
cp 0x09
jr c,PF_NOT_E ; to PF-NOT-E
cp 0xFC
jr c,PF_E_FRMT ; to PF-E-FRMT
;; PF-NOT-E
PF_NOT_E:
and a ; test for zero leading digits as in .123
call z,OUT_CODE ; routine OUT-CODE prints a zero e.g. 0.123
;; PF-E-SBRN
PF_E_SBRN:
xor a
sub b
jp m,PF_OUT_LP ; skip forward to PF-OUT-LP if originally +ve
ld b,a ; else negative count now +ve
jr PF_DC_OUT ; forward to PF-DC-OUT ->
; ---
;; PF-OUT-LP
PF_OUT_LP:
ld a,c ; fetch total digit count
and a ; test for zero
jr z,PF_OUT_DT ; forward to PF-OUT-DT if so
ldi a,(hl) ; fetch digit
; address next digit
dec c ; decrease total digit counter
;; PF-OUT-DT
PF_OUT_DT:
call OUT_CODE ; routine OUT-CODE outputs it.
djnz PF_OUT_LP ; loop back to PF-OUT-LP until B leading
; digits output.
;; PF-DC-OUT
PF_DC_OUT:
ld a,c ; fetch total digits and
and a ; test if also zero
ret z ; return if so -->
;
inc b ; increment B
ld a,0x2E ; prepare the character '.'
;; PF-DEC-0S
PF_DEC_0S:
rst 0x10 ; PRINT-A outputs the character '.' or '0'
ld a,0x30 ; prepare the character '0'
; (for cases like .000012345678)
djnz PF_DEC_0S ; loop back to PF-DEC-0S for B times.
ld b,c ; load B with now trailing digit counter.
jr PF_OUT_LP ; back to PF-OUT-LP
; ---------------------------------
; the branch was here for E-format printing e.g. 123456789 => 1.2345679e+8
;; PF-E-FRMT
PF_E_FRMT:
ld d,b ; counter to D
dec d ; decrement
ld b,0x01 ; load B with 1.
call PF_E_SBRN ; routine PF-E-SBRN above
ld a,0x45 ; prepare character 'e'
rst 0x10 ; PRINT-A
ld c,d ; exponent to C
ld a,c ; and to A
and a ; test exponent
jp p,PF_E_POS ; to PF-E-POS if positive
neg ; negate
ld c,a ; positive exponent to C
ld a,0x2D ; prepare character '-'
jr PF_E_SIGN ; skip to PF-E-SIGN
; ---
;; PF-E-POS
PF_E_POS:
ld a,0x2B ; prepare character '+'
;; PF-E-SIGN
PF_E_SIGN:
rst 0x10 ; PRINT-A outputs the sign
ld b,0x00 ; make the high byte zero.
jp OUT_NUM_1 ; exit via OUT-NUM-1 to print exponent in BC
; ------------------------------
; Handle printing floating point
; ------------------------------
; This subroutine is called twice from above when printing floating-point
; numbers. It returns 10*A +C in registers C and A
;; CA-10*A+C
CA_10_A_C:
push de ; preserve DE.
ld l,a ; transfer A to L
ld h,0x00 ; zero high byte.
ld e,l ; copy HL
ld d,h ; to DE.
add hl,hl ; double (*2)
add hl,hl ; double (*4)
add hl,de ; add DE (*5)
add hl,hl ; double (*10)
ld e,c ; copy C to E (D is 0)
add hl,de ; and add to give required result.
ld c,h ; transfer to
ld a,l ; destination registers.
pop de ; restore DE
ret ; return with result.
; --------------
; Prepare to add
; --------------
; This routine is called twice by addition to prepare the two numbers. The
; exponent is picked up in A and the location made zero. Then the sign bit
; is tested before being set to the implied state. Negative numbers are twos
; complemented.
;; PREP-ADD
PREP_ADD:
ld a,(hl) ; pick up exponent
ld (hl),0x00 ; make location zero
and a ; test if number is zero
ret z ; return if so
inc hl ; address mantissa
bit 7,(hl) ; test the sign bit
set 7,(hl) ; set it to implied state
dec hl ; point to exponent
ret z ; return if positive number.
push bc ; preserve BC
ld bc,0x0005 ; length of number
add hl,bc ; point HL past end
ld b,c ; set B to 5 counter
ld c,a ; store exponent in C
scf ; set carry flag
;; NEG-BYTE
NEG_BYTE:
dec hl ; work from LSB to MSB
ld a,(hl) ; fetch byte
cpl ; complement
adc a,0x00 ; add in initial carry or from prev operation
ld (hl),a ; put back
djnz NEG_BYTE ; loop to NEG-BYTE till all 5 done
ld a,c ; stored exponent to A
pop bc ; restore original BC
ret ; return
; -----------------
; Fetch two numbers
; -----------------
; This routine is called twice when printing floating point numbers and also
; to fetch two numbers by the addition, multiply and division routines.
; HL addresses the first number, DE addresses the second number.
; For arithmetic only, A holds the sign of the result which is stored in
; the second location.
;; FETCH-TWO
FETCH_TWO:
push hl ; save pointer to first number, result if math.
push af ; save result sign.
ldi c,(hl)
ld b,(hl)
ldi (hl),a ; store the sign at correct location in
; destination 5 bytes for arithmetic only.
ld a,c
ld c,(hl)
push bc
inc hl
ldi c,(hl)
ld b,(hl)
ex de,hl
ld d,a
ld e,(hl)
push de
inc hl
ldi d,(hl)
ld e,(hl)
push de
exx
pop de
pop hl
pop bc
exx
inc hl
ldi d,(hl)
ld e,(hl)
pop af ; restore possible result sign.
pop hl ; and pointer to possible result.
ret ; return.
; ---------------------------------
; Shift floating point number right
; ---------------------------------
;
;
;; SHIFT-FP
SHIFT_FP:
and a
ret z
cp 0x21
jr nc,ADDEND_0 ; to ADDEND-0
push bc
ld b,a
;; ONE-SHIFT
ONE_SHIFT:
exx
sra l
rr de
exx
rr de
djnz ONE_SHIFT ; to ONE-SHIFT
pop bc
ret nc
call ADD_BACK ; routine ADD-BACK
ret nz
;; ADDEND-0
ADDEND_0:
exx
xor a
;; ZEROS-4/5
ZEROS_4_5:
ld l,0x00
ld d,a
ld e,l
exx
ld de,0x0000
ret
; ------------------
; Add back any carry
; ------------------
;
;
;; ADD-BACK
ADD_BACK:
inc e
ret nz
inc d
ret nz
exx
inc e
jr nz,ALL_ADDED ; to ALL-ADDED
inc d
;; ALL-ADDED
ALL_ADDED:
exx
ret
; -----------------------
; Handle subtraction (03)
; -----------------------
; Subtraction is done by switching the sign byte/bit of the second number
; which may be integer of floating point and continuing into addition.
;; subtract
subtract:
ex de,hl ; address second number with HL
call negate ; routine NEGATE switches sign
ex de,hl ; address first number again
; and continue.
; --------------------
; Handle addition (0F)
; --------------------
; HL points to first number, DE to second.
; If they are both integers, then go for the easy route.
;; addition
addition:
ld a,(de) ; fetch first byte of second
or (hl) ; combine with first byte of first
jr nz,FULL_ADDN ; forward to FULL-ADDN if at least one was
; in floating point form.
; continue if both were small integers.
push de ; save pointer to lowest number for result.
inc hl ; address sign byte and
push hl ; push the pointer.
inc hl ; address low byte
ldi de,(hl) ; to E
; address high byte
; to D
; address unused byte
inc hl ; address known zero indicator of 1st number
inc hl ; address sign byte
ldi a,(hl) ; sign to A, $00 or $FF
; address low byte
ldi c,(hl) ; to C
; address high byte
ld b,(hl) ; to B
pop hl ; pop result sign pointer
ex de,hl ; integer to HL
add hl,bc ; add to the other one in BC
; setting carry if overflow.
ex de,hl ; save result in DE bringing back sign pointer
adc a,(hl) ; if pos/pos A=01 with overflow else 00
; if neg/neg A=FF with overflow else FE
; if mixture A=00 with overflow else FF
rrca ; bit 0 to (C)
adc a,0x00 ; both acceptable signs now zero
jr nz,ADDN_OFLW ; forward to ADDN-OFLW if not
sbc a,a ; restore a negative result sign
ldi (hl),a
ld (hl),de
dec hl
dec hl
pop de ; STKEND
ret
; ---
;; ADDN-OFLW
ADDN_OFLW:
dec hl
pop de
;; FULL-ADDN
FULL_ADDN:
call RE_ST_TWO ; routine RE-ST-TWO
exx
push hl
exx
push de
push hl
call PREP_ADD ; routine PREP-ADD
ld b,a
ex de,hl
call PREP_ADD ; routine PREP-ADD
ld c,a
cp b
jr nc,SHIFT_LEN ; to SHIFT-LEN
ld a,b
ld b,c
ex de,hl
;; SHIFT-LEN
SHIFT_LEN:
push af
sub b
call FETCH_TWO ; routine FETCH-TWO
call SHIFT_FP ; routine SHIFT-FP
pop af
pop hl
ld (hl),a
push hl
ld l,b
ld h,c
add hl,de
exx
ex de,hl
adc hl,bc
ex de,hl
ld a,h
adc a,l
ld l,a
rra
xor l
exx
ex de,hl
pop hl
rra
jr nc,TEST_NEG ; to TEST-NEG
ld a,0x01
call SHIFT_FP ; routine SHIFT-FP
inc (hl)
jr z,ADD_REP_6 ; to ADD-REP-6
;; TEST-NEG
TEST_NEG:
exx
ld a,l
and 0x80
exx
inc hl
ldd (hl),a
jr z,GO_NC_MLT ; to GO-NC-MLT
ld a,e
neg ; Negate
ccf ; Complement Carry Flag
ld e,a
ld a,d
cpl
adc a,0x00
ld d,a
exx
ld a,e
cpl
adc a,0x00
ld e,a
ld a,d
cpl
adc a,0x00
jr nc,END_COMPL ; to END-COMPL
rra
exx
inc (hl)
;; ADD-REP-6
ADD_REP_6:
jp z,REPORT_6 ; to REPORT-6
exx
;; END-COMPL
END_COMPL:
ld d,a
exx
;; GO-NC-MLT
GO_NC_MLT:
xor a
jp TEST_NORM ; to TEST-NORM
; -----------------------------
; Used in 16 bit multiplication
; -----------------------------
; This routine is used, in the first instance, by the multiply calculator
; literal to perform an integer multiplication in preference to
; 32-bit multiplication to which it will resort if this overflows.
;
; It is also used by STK-VAR to calculate array subscripts and by DIM to
; calculate the space required for multi-dimensional arrays.
;; HL-HL*DE
HL_HL_DE:
push bc ; preserve BC throughout
ld b,0x10 ; set B to 16
ld a,h ; save H in A high byte
ld c,l ; save L in C low byte
ld hl,0x0000 ; initialize result to zero
; now enter a loop.
;; HL-LOOP
HL_LOOP:
add hl,hl ; double result
jr c,HL_END ; to HL-END if overflow
rl c ; shift AC left into carry
rla
jr nc,HL_AGAIN ; to HL-AGAIN to skip addition if no carry
add hl,de ; add in DE
jr c,HL_END ; to HL-END if overflow
;; HL-AGAIN
HL_AGAIN:
djnz HL_LOOP ; back to HL-LOOP for all 16 bits
;; HL-END
HL_END:
pop bc ; restore preserved BC
ret ; return with carry reset if successful
; and result in HL.
; ----------------------------------------------
; THE 'PREPARE TO MULTIPLY OR DIVIDE' SUBROUTINE
; ----------------------------------------------
; This routine is called in succession from multiply and divide to prepare
; two mantissas by setting the leftmost bit that is used for the sign.
; On the first call A holds zero and picks up the sign bit. On the second
; call the two bits are XORed to form the result sign - minus * minus giving
; plus etc. If either number is zero then this is flagged.
; HL addresses the exponent.
;; PREP-M/D
PREP_M_D:
call TEST_ZERO ; routine TEST-ZERO preserves accumulator.
ret c ; return carry set if zero
inc hl ; address first byte of mantissa
xor (hl) ; pick up the first or xor with first.
set 7,(hl) ; now set to give true 32-bit mantissa
dec hl ; point to exponent
ret ; return with carry reset
; ----------------------
; THE 'MULTIPLY' ROUTINE
; ----------------------
; (offset: $04 'multiply')
;
;
; "He said go forth and something about mathematics, I wasn't really
; listening" - overheard conversation between two unicorns.
; [ The Odd Streak ].
;; multiply
multiply:
ld a,(de)
or (hl)
jr nz,MULT_LONG ; to MULT-LONG
push de
push hl
push de
call INT_FETCH ; routine INT-FETCH
ex de,hl
ex (sp),hl
ld b,c
call INT_FETCH ; routine INT-FETCH
ld a,b
xor c
ld c,a
pop hl
call HL_HL_DE ; routine HL-HL*DE
ex de,hl
pop hl
jr c,MULT_OFLW ; to MULT-OFLW
ld a,d
or e
jr nz,MULT_RSLT ; to MULT-RSLT
ld c,a
;; MULT-RSLT
MULT_RSLT:
call INT_STORE ; routine INT-STORE
pop de
ret
; ---
;; MULT-OFLW
MULT_OFLW:
pop de
;; MULT-LONG
MULT_LONG:
call RE_ST_TWO ; routine RE-ST-TWO
xor a
call PREP_M_D ; routine PREP-M/D
ret c
exx
push hl
exx
push de
ex de,hl
call PREP_M_D ; routine PREP-M/D
ex de,hl
jr c,ZERO_RSLT ; to ZERO-RSLT
push hl
call FETCH_TWO ; routine FETCH-TWO
ld a,b
and a
sbc hl,hl
exx
push hl
sbc hl,hl
exx
ld b,0x21
jr STRT_MLT ; to STRT-MLT
; ---
;; MLT-LOOP
MLT_LOOP:
jr nc,NO_ADD ; to NO-ADD
add hl,de
exx
adc hl,de
exx
;; NO-ADD
NO_ADD:
exx
rr hl
exx
rr hl
;; STRT-MLT
STRT_MLT:
exx
rr bc
exx
rr c
rra
djnz MLT_LOOP ; to MLT-LOOP
ex de,hl
exx
ex de,hl
exx
pop bc
pop hl
ld a,b
add a,c
jr nz,MAKE_EXPT ; to MAKE-EXPT
and a
;; MAKE-EXPT
MAKE_EXPT:
dec a
ccf ; Complement Carry Flag
;; DIVN-EXPT
DIVN_EXPT:
rla
ccf ; Complement Carry Flag
rra
jp p,OFLW1_CLR ; to OFLW1-CLR
jr nc,REPORT_6 ; to REPORT-6
and a
;; OFLW1-CLR
OFLW1_CLR:
inc a
jr nz,OFLW2_CLR ; to OFLW2-CLR
jr c,OFLW2_CLR ; to OFLW2-CLR
exx
bit 7,d
exx
jr nz,REPORT_6 ; to REPORT-6
;; OFLW2-CLR
OFLW2_CLR:
ld (hl),a
exx
ld a,b
exx
;; TEST-NORM
TEST_NORM:
jr nc,NORMALISE ; to NORMALISE
ld a,(hl)
and a
;; NEAR-ZERO
NEAR_ZERO:
ld a,0x80
jr z,SKIP_ZERO ; to SKIP-ZERO
;; ZERO-RSLT
ZERO_RSLT:
xor a
;; SKIP-ZERO
SKIP_ZERO:
exx
and d
call ZEROS_4_5 ; routine ZEROS-4/5
rlca
ld (hl),a
jr c,OFLOW_CLR ; to OFLOW-CLR
inc hl
ldd (hl),a
jr OFLOW_CLR ; to OFLOW-CLR
; ---
;; NORMALISE
NORMALISE:
ld b,0x20
;; SHIFT-ONE
SHIFT_ONE:
exx
bit 7,d
exx
jr nz,NORML_NOW ; to NORML-NOW
rlca
rl de
exx
rl de
exx
dec (hl)
jr z,NEAR_ZERO ; to NEAR-ZERO
djnz SHIFT_ONE ; to SHIFT-ONE
jr ZERO_RSLT ; to ZERO-RSLT
; ---
;; NORML-NOW
NORML_NOW:
rla
jr nc,OFLOW_CLR ; to OFLOW-CLR
call ADD_BACK ; routine ADD-BACK
jr nz,OFLOW_CLR ; to OFLOW-CLR
exx
ld d,0x80
exx
inc (hl)
jr z,REPORT_6 ; to REPORT-6
;; OFLOW-CLR
OFLOW_CLR:
push hl
inc hl
exx
push de
exx
pop bc
ld a,b
rla
rl (hl)
rra
ldi (hl),a
ldi (hl),c
ldi (hl),d
ld (hl),e
pop hl
pop de
exx
pop hl
exx
ret
; ---
;; REPORT-6
REPORT_6:
rst 0x08 ; ERROR-1
defb 0x05 ; Error Report: Number too big
; ----------------------
; THE 'DIVISION' ROUTINE
; ----------------------
; (offset: $05 'division')
;
; "He who can properly define and divide is to be considered a god"
; - Plato, 429 - 347 B.C.
;; division
division:
call RE_ST_TWO ; routine RE-ST-TWO
ex de,hl
xor a
call PREP_M_D ; routine PREP-M/D
jr c,REPORT_6 ; to REPORT-6
ex de,hl
call PREP_M_D ; routine PREP-M/D
ret c
exx
push hl
exx
push de
push hl
call FETCH_TWO ; routine FETCH-TWO
exx
push hl
ld hl,bc
exx
ld h,c
ld l,b
xor a
ld b,0xDF
jr DIV_START ; to DIV-START
; ---
;; DIV-LOOP
DIV_LOOP:
rla
rl c
exx
rl bc
exx
;; div-34th
div_34th:
add hl,hl
exx
adc hl,hl
exx
jr c,SUBN_ONLY ; to SUBN-ONLY
;; DIV-START
DIV_START:
sbc hl,de
exx
sbc hl,de
exx
jr nc,NO_RSTORE ; to NO-RSTORE
add hl,de
exx
adc hl,de
exx
and a
jr COUNT_ONE ; to COUNT-ONE
; ---
;; SUBN-ONLY
SUBN_ONLY:
and a
sbc hl,de
exx
sbc hl,de
exx
;; NO-RSTORE
NO_RSTORE:
scf ; Set Carry Flag
;; COUNT-ONE
COUNT_ONE:
inc b
jp m,DIV_LOOP ; to DIV-LOOP
push af
jr z,DIV_START ; to DIV-START
;
;
;
;
ld e,a
ld d,c
exx
ld e,c
ld d,b
pop af
rr b
pop af
rr b
exx
pop bc
pop hl
ld a,b
sub c
jp DIVN_EXPT ; jump back to DIVN-EXPT
; ------------------------------------
; Integer truncation towards zero ($3A)
; ------------------------------------
;
;
;; truncate
truncate:
ld a,(hl)
and a
ret z
cp 0x81
jr nc,T_GR_ZERO ; to T-GR-ZERO
ld (hl),0x00
ld a,0x20
jr NIL_BYTES ; to NIL-BYTES
; ---
;; T-GR-ZERO
T_GR_ZERO:
cp 0x91
jr nz,T_SMALL ; to T-SMALL
inc hl
inc hl
inc hl
ld a,0x80
and (hl)
dec hl
or (hl)
dec hl
jr nz,T_FIRST ; to T-FIRST
ld a,0x80
xor (hl)
;; T-FIRST
T_FIRST:
dec hl
jr nz,T_EXPNENT ; to T-EXPNENT
ldi (hl),a
ldd (hl),0xFF
ld a,0x18
jr NIL_BYTES ; to NIL-BYTES
; ---
;; T-SMALL
T_SMALL:
jr nc,X_LARGE ; to X-LARGE
push de
cpl
add a,0x91
inc hl
ldi d,(hl)
ldd e,(hl)
dec hl
ld c,0x00
bit 7,d
jr z,T_NUMERIC ; to T-NUMERIC
dec c
;; T-NUMERIC
T_NUMERIC:
set 7,d
ld b,0x08
sub b
add a,b
jr c,T_TEST ; to T-TEST
ld e,d
ld d,0x00
sub b
;; T-TEST
T_TEST:
jr z,T_STORE ; to T-STORE
ld b,a
;; T-SHIFT
T_SHIFT:
srl de
djnz T_SHIFT ; to T-SHIFT
;; T-STORE
T_STORE:
call INT_STORE ; routine INT-STORE
pop de
ret
; ---
;; T-EXPNENT
T_EXPNENT:
ld a,(hl)
;; X-LARGE
X_LARGE:
sub 0xA0
ret p
neg ; Negate
;; NIL-BYTES
NIL_BYTES:
push de
ex de,hl
dec hl
ld b,a
srl b
srl b
srl b
jr z,BITS_ZERO ; to BITS-ZERO
;; BYTE-ZERO
BYTE_ZERO:
ldd (hl),0x00
djnz BYTE_ZERO ; to BYTE-ZERO
;; BITS-ZERO
BITS_ZERO:
and 0x07
jr z,IX_END ; to IX-END
ld b,a
ld a,0xFF
;; LESS-MASK
LESS_MASK:
sla a
djnz LESS_MASK ; to LESS-MASK
and (hl)
ld (hl),a
;; IX-END
IX_END:
ex de,hl
pop de
ret
; ----------------------------------
; Storage of numbers in 5 byte form.
; ==================================
; Both integers and floating-point numbers can be stored in five bytes.
; Zero is a special case stored as 5 zeros.
; For integers the form is
; Byte 1 - zero,
; Byte 2 - sign byte, $00 +ve, $FF -ve.
; Byte 3 - Low byte of integer.
; Byte 4 - High byte
; Byte 5 - unused but always zero.
;
; it seems unusual to store the low byte first but it is just as easy either
; way. Statistically it just increases the chances of trailing zeros which
; is an advantage elsewhere in saving ROM code.
;
; zero sign low high unused
; So +1 is 00000000 00000000 00000001 00000000 00000000
;
; and -1 is 00000000 11111111 11111111 11111111 00000000
;
; much of the arithmetic found in BASIC lines can be done using numbers
; in this form using the Z80's 16 bit register operation ADD.
; (multiplication is done by a sequence of additions).
;
; Storing -ve integers in two's complement form, means that they are ready for
; addition and you might like to add the numbers above to prove that the
; answer is zero. If, as in this case, the carry is set then that denotes that
; the result is positive. This only applies when the signs don't match.
; With positive numbers a carry denotes the result is out of integer range.
; With negative numbers a carry denotes the result is within range.
; The exception to the last rule is when the result is -65536
;
; Floating point form is an alternative method of storing numbers which can
; be used for integers and larger (or fractional) numbers.
;
; In this form 1 is stored as
; 10000001 00000000 00000000 00000000 00000000
;
; When a small integer is converted to a floating point number the last two
; bytes are always blank so they are omitted in the following steps
;
; first make exponent +1 +16d (bit 7 of the exponent is set if positive)
; 10010001 00000000 00000001
; 10010000 00000000 00000010 <- now shift left and decrement exponent
; ...
; 10000010 01000000 00000000 <- until a 1 abuts the imaginary point
; 10000001 10000000 00000000 to the left of the mantissa.
;
; however since the leftmost bit of the mantissa is always set then it can
; be used to denote the sign of the mantissa and put back when needed by the
; PREP routines which gives
;
; 10000001 00000000 00000000
; ----------------------------------------------
; THE 'RE-STACK TWO "SMALL" INTEGERS' SUBROUTINE
; ----------------------------------------------
; This routine is called to re-stack two numbers in full floating point form
; e.g. from mult when integer multiplication has overflowed.
;; RE-ST-TWO
RE_ST_TWO:
call RESTK_SUB ; routine RESTK-SUB below and continue
; into the routine to do the other one.
;; RESTK-SUB
RESTK_SUB:
ex de,hl ; swap pointers
; ---------------------------------------------
; THE 'RE-STACK ONE "SMALL" INTEGER' SUBROUTINE
; ---------------------------------------------
; (offset: $3D 're-stack')
; This routine re-stacks an integer, usually on the calculator stack, in full
; floating point form. HL points to first byte.
;; re-stack
re_stack:
ld a,(hl) ; Fetch Exponent byte to A
and a ; test it
ret nz ; return if not zero as already in full
; floating-point form.
push de ; preserve DE.
call INT_FETCH ; routine INT-FETCH
; integer to DE, sign to C.
; HL points to 4th byte.
xor a ; clear accumulator.
inc hl ; point to 5th.
ldd (hl),a ; and blank.
; point to 4th.
ld (hl),a ; and blank.
ld b,0x91 ; set exponent byte +ve $81
; and imaginary dec point 16 bits to right
; of first bit.
; we could skip to normalize now but it's quicker to avoid normalizing
; through an empty D.
ld a,d ; fetch the high byte D
and a ; is it zero ?
jr nz,RS_NRMLSE ; skip to RS-NRMLSE if not.
or e ; low byte E to A and test for zero
ld b,d ; set B exponent to 0
jr z,RS_STORE ; forward to RS-STORE if value is zero.
ld d,e ; transfer E to D
ld e,b ; set E to 0
ld b,0x89 ; reduce the initial exponent by eight.
;; RS-NRMLSE
RS_NRMLSE:
ex de,hl ; integer to HL, addr of 4th byte to DE.
;; RSTK-LOOP
RSTK_LOOP:
dec b ; decrease exponent
add hl,hl ; shift DE left
jr nc,RSTK_LOOP ; loop back to RSTK-LOOP
; until a set bit pops into carry
rrc c ; now rotate the sign byte $00 or $FF
; into carry to give a sign bit
rr hl ; rotate the sign bit to left of H
; rotate any carry into L
ex de,hl ; address 4th byte, normalized int to DE
;; RS-STORE
RS_STORE:
dec hl ; address 3rd byte
ldd (hl),e ; place E
; address 2nd byte
ldd (hl),d ; place D
; address 1st byte
ld (hl),b ; store the exponent
pop de ; restore initial DE.
ret ; return.
;****************************************
;** Part 10. FLOATING-POINT CALCULATOR **
;****************************************
; As a general rule the calculator avoids using the IY register.
; exceptions are val, val$ and str$.
; So an assembly language programmer who has disabled interrupts to use
; IY for other purposes can still use the calculator for mathematical
; purposes.
; ------------------------
; THE 'TABLE OF CONSTANTS'
; ------------------------
;
;
; used 11 times
;; stk-zero 00 00 00 00 00
stk_zero:
defb 0x00 ; ;Bytes: 1
defb 0xB0,0x00 ; ;Exponent $00
; ;(+00,+00,+00)
; used 19 times
;; stk-one 00 00 01 00 00
stk_one:
defb 0x40 ; ;Bytes: 2
defb 0xB0,0x00,0x01 ; ;Exponent $00
; ;(+00,+00)
; used 9 times
;; stk-half 80 00 00 00 00
stk_half:
defb 0x30 ; ;Exponent: $80, Bytes: 1
defb 0x00 ; ;(+00,+00,+00)
; used 4 times.
;; stk-pi/2 81 49 0F DA A2
stk_pi_2:
defb 0xF1 ; ;Exponent: $81, Bytes: 4
defb 0x49,0x0F,0xDA,0xA2
; ;
; used 3 times.
;; stk-ten 00 00 0A 00 00
stk_ten:
defb 0x40 ; ;Bytes: 2
defb 0xB0,0x00,0x0A ; ;Exponent $00
; ;(+00,+00)
; ------------------------
; THE 'TABLE OF ADDRESSES'
; ------------------------
; "Each problem that I solved became a rule which served afterwards to solve
; other problems" - Rene Descartes 1596 - 1650.
;
; Starts with binary operations which have two operands and one result.
; Three pseudo binary operations first.
;; tbl-addrs
tbl_addrs:
defw jump_true ; $00 Address: $368F - jump-true
defw exchange ; $01 Address: $343C - exchange
defw delete ; $02 Address: $33A1 - delete
; True binary operations.
defw subtract ; $03 Address: $300F - subtract
defw multiply ; $04 Address: $30CA - multiply
defw division ; $05 Address: $31AF - division
defw to_power ; $06 Address: $3851 - to-power
defw or_func ; $07 Address: $351B - or
defw no___no ; $08 Address: $3524 - no-&-no
defw no_l_eql_etc_ ; $09 Address: $353B - no-l-eql
defw no_l_eql_etc_ ; $0A Address: $353B - no-gr-eql
defw no_l_eql_etc_ ; $0B Address: $353B - nos-neql
defw no_l_eql_etc_ ; $0C Address: $353B - no-grtr
defw no_l_eql_etc_ ; $0D Address: $353B - no-less
defw no_l_eql_etc_ ; $0E Address: $353B - nos-eql
defw addition ; $0F Address: $3014 - addition
defw str___no ; $10 Address: $352D - str-&-no
defw no_l_eql_etc_ ; $11 Address: $353B - str-l-eql
defw no_l_eql_etc_ ; $12 Address: $353B - str-gr-eql
defw no_l_eql_etc_ ; $13 Address: $353B - strs-neql
defw no_l_eql_etc_ ; $14 Address: $353B - str-grtr
defw no_l_eql_etc_ ; $15 Address: $353B - str-less
defw no_l_eql_etc_ ; $16 Address: $353B - strs-eql
defw strs_add ; $17 Address: $359C - strs-add
; Unary follow.
defw val_ ; $18 Address: $35DE - val$
defw usr__ ; $19 Address: $34BC - usr-$
defw read_in ; $1A Address: $3645 - read-in
defw negate ; $1B Address: $346E - negate
defw code ; $1C Address: $3669 - code
defw val_ ; $1D Address: $35DE - val
defw len ; $1E Address: $3674 - len
defw sin ; $1F Address: $37B5 - sin
defw cos ; $20 Address: $37AA - cos
defw tan ; $21 Address: $37DA - tan
defw asn ; $22 Address: $3833 - asn
defw acs ; $23 Address: $3843 - acs
defw atn ; $24 Address: $37E2 - atn
defw ln ; $25 Address: $3713 - ln
defw exp ; $26 Address: $36C4 - exp
defw int ; $27 Address: $36AF - int
defw sqr ; $28 Address: $384A - sqr
defw sgn ; $29 Address: $3492 - sgn
defw abs ; $2A Address: $346A - abs
defw peek ; $2B Address: $34AC - peek
defw in_func ; $2C Address: $34A5 - in
defw usr_no ; $2D Address: $34B3 - usr-no
defw str_ ; $2E Address: $361F - str$
defw chrs ; $2F Address: $35C9 - chrs
defw not ; $30 Address: $3501 - not
; End of true unary.
defw MOVE_FP ; $31 Address: $33C0 - duplicate
defw n_mod_m ; $32 Address: $36A0 - n-mod-m
defw JUMP ; $33 Address: $3686 - jump
defw stk_data ; $34 Address: $33C6 - stk-data
defw dec_jr_nz ; $35 Address: $367A - dec-jr-nz
defw less_0 ; $36 Address: $3506 - less-0
defw greater_0 ; $37 Address: $34F9 - greater-0
defw end_calc ; $38 Address: $369B - end-calc
defw get_argt ; $39 Address: $3783 - get-argt
defw truncate ; $3A Address: $3214 - truncate
defw fp_calc_2 ; $3B Address: $33A2 - fp-calc-2
defw E_TO_FP ; $3C Address: $2D4F - e-to-fp
defw re_stack ; $3D Address: $3297 - re-stack
; The following are just the next available slots for the 128 compound
; literals which are in range $80 - $FF.
defw series_xx ; Address: $3449 - series-xx $80 - $9F.
defw stk_const_xx ; Address: $341B - stk-const-xx $A0 - $BF.
defw st_mem_xx ; Address: $342D - st-mem-xx $C0 - $DF.
defw get_mem_xx ; Address: $340F - get-mem-xx $E0 - $FF.
; Aside: 3E - 3F are therefore unused calculator literals.
; If the literal has to be also usable as a function then bits 6 and 7 are
; used to show type of arguments and result.
; --------------
; The Calculator
; --------------
; "A good calculator does not need artificial aids"
; Lao Tze 604 - 531 B.C.
;; CALCULATE
CALCULATE:
call STK_PNTRS ; routine STK-PNTRS is called to set up the
; calculator stack pointers for a default
; unary operation. HL = last value on stack.
; DE = STKEND first location after stack.
; the calculate routine is called at this point by the series generator...
;; GEN-ENT-1
GEN_ENT_1:
ld a,b ; fetch the Z80 B register to A
ld (BREG),a ; and store value in system variable BREG.
; this will be the counter for dec-jr-nz
; or if used from fp-calc2 the calculator
; instruction.
; ... and again later at this point
;; GEN-ENT-2
GEN_ENT_2:
exx ; switch sets
ex (sp),hl ; and store the address of next instruction,
; the return address, in H'L'.
; If this is a recursive call the H'L'
; of the previous invocation goes on stack.
; c.f. end-calc.
exx ; switch back to main set
; this is the re-entry looping point when handling a string of literals.
;; RE-ENTRY
RE_ENTRY:
ld (STKEND),de ; save end of stack in system variable STKEND
exx ; switch to alt
ldi a,(hl) ; get next literal
; increase pointer'
; single operation jumps back to here
;; SCAN-ENT
SCAN_ENT:
push hl ; save pointer on stack
and a ; now test the literal
jp p,FIRST_3D ; forward to FIRST-3D if in range $00 - $3D
; anything with bit 7 set will be one of
; 128 compound literals.
; compound literals have the following format.
; bit 7 set indicates compound.
; bits 6-5 the subgroup 0-3.
; bits 4-0 the embedded parameter $00 - $1F.
; The subgroup 0-3 needs to be manipulated to form the next available four
; address places after the simple literals in the address table.
ld d,a ; save literal in D
and 0x60 ; and with 01100000 to isolate subgroup
rrca ; rotate bits
rrca ; 4 places to right
rrca ; not five as we need offset * 2
rrca ; 00000xx0
add a,0x7C ; add ($3E * 2) to give correct offset.
; alter above if you add more literals.
ld l,a ; store in L for later indexing.
ld a,d ; bring back compound literal
and 0x1F ; use mask to isolate parameter bits
jr ENT_TABLE ; forward to ENT-TABLE
; ---
; the branch was here with simple literals.
;; FIRST-3D
FIRST_3D:
cp 0x18 ; compare with first unary operations.
jr nc,DOUBLE_A ; to DOUBLE-A with unary operations
; it is binary so adjust pointers.
exx
ld bc,0xFFFB ; the value -5
ld de,hl ; transfer HL, the last value, to DE.
add hl,bc ; subtract 5 making HL point to second
; value.
exx
;; DOUBLE-A
DOUBLE_A:
rlca ; double the literal
ld l,a ; and store in L for indexing
;; ENT-TABLE
ENT_TABLE:
ld de,tbl_addrs ; Address: tbl-addrs
ld h,0x00 ; prepare to index
add hl,de ; add to get address of routine
ldi e,(hl) ; low byte to E
ld d,(hl) ; high byte to D
ld hl,RE_ENTRY ; Address: RE-ENTRY
ex (sp),hl ; goes to stack
push de ; now address of routine
exx ; main set
; avoid using IY register.
ld bc,(0x5C66) ; STKEND_hi
; nothing much goes to C but BREG to B
; and continue into next ret instruction
; which has a dual identity
; ------------------
; Handle delete (02)
; ------------------
; A simple return but when used as a calculator literal this
; deletes the last value from the calculator stack.
; On entry, as always with binary operations,
; HL=first number, DE=second number
; On exit, HL=result, DE=stkend.
; So nothing to do
;; delete
delete:
ret ; return - indirect jump if from above.
; ---------------------
; Single operation (3B)
; ---------------------
; This single operation is used, in the first instance, to evaluate most
; of the mathematical and string functions found in BASIC expressions.
;; fp-calc-2
fp_calc_2:
pop af ; drop return address.
ld a,(BREG) ; load accumulator from system variable BREG
; value will be literal e.g. 'tan'
exx ; switch to alt
jr SCAN_ENT ; back to SCAN-ENT
; next literal will be end-calc at L2758
; ---------------------------------
; THE 'TEST FIVE SPACES' SUBROUTINE
; ---------------------------------
; This routine is called from MOVE-FP, STK-CONST and STK-STORE to test that
; there is enough space between the calculator stack and the machine stack
; for another five-byte value. It returns with BC holding the value 5 ready
; for any subsequent LDIR.
;; TEST-5-SP
TEST_5_SP:
push de ; save
push hl ; registers
ld bc,0x0005 ; an overhead of five bytes
call TEST_ROOM ; routine TEST-ROOM tests free RAM raising
; an error if not.
pop hl ; else restore
pop de ; registers.
ret ; return with BC set at 5.
; -----------------------------
; THE 'STACK NUMBER' SUBROUTINE
; -----------------------------
; This routine is called to stack a hidden floating point number found in
; a BASIC line. It is also called to stack a numeric variable value, and
; from BEEP, to stack an entry in the semi-tone table. It is not part of the
; calculator suite of routines. On entry, HL points to the number to be
; stacked.
;; STACK-NUM
STACK_NUM:
ld de,(STKEND) ; Load destination from STKEND system variable.
call MOVE_FP ; Routine MOVE-FP puts on calculator stack
; with a memory check.
ld (STKEND),de ; Set STKEND to next free location.
ret ; Return.
; ---------------------------------
; Move a floating point number (31)
; ---------------------------------
; This simple routine is a 5-byte LDIR instruction
; that incorporates a memory check.
; When used as a calculator literal it duplicates the last value on the
; calculator stack.
; Unary so on entry HL points to last value, DE to stkend
;; duplicate
;; MOVE-FP
MOVE_FP:
call TEST_5_SP ; routine TEST-5-SP test free memory
; and sets BC to 5.
ldir ; copy the five bytes.
ret ; return with DE addressing new STKEND
; and HL addressing new last value.
; -------------------
; Stack literals ($34)
; -------------------
; When a calculator subroutine needs to put a value on the calculator
; stack that is not a regular constant this routine is called with a
; variable number of following data bytes that convey to the routine
; the integer or floating point form as succinctly as is possible.
;; stk-data
stk_data:
ld hl,de ; transfer STKEND
; to HL for result.
;; STK-CONST
STK_CONST:
call TEST_5_SP ; routine TEST-5-SP tests that room exists
; and sets BC to $05.
exx ; switch to alternate set
push hl ; save the pointer to next literal on stack
exx ; switch back to main set
ex (sp),hl ; pointer to HL, destination to stack.
push bc ; save BC - value 5 from test room ??.
ld a,(hl) ; fetch the byte following 'stk-data'
and 0xC0 ; isolate bits 7 and 6
rlca ; rotate
rlca ; to bits 1 and 0 range $00 - $03.
ld c,a ; transfer to C
inc c ; and increment to give number of bytes
; to read. $01 - $04
ld a,(hl) ; reload the first byte
and 0x3F ; mask off to give possible exponent.
jr nz,FORM_EXP ; forward to FORM-EXP if it was possible to
; include the exponent.
; else byte is just a byte count and exponent comes next.
inc hl ; address next byte and
ld a,(hl) ; pick up the exponent ( - $50).
;; FORM-EXP
FORM_EXP:
add a,0x50 ; now add $50 to form actual exponent
ld (de),a ; and load into first destination byte.
ld a,0x05 ; load accumulator with $05 and
sub c ; subtract C to give count of trailing
; zeros plus one.
inc hl ; increment source
inc de ; increment destination
ld b,0x00 ; prepare to copy
ldir ; copy C bytes
pop bc ; restore 5 counter to BC ??.
ex (sp),hl ; put HL on stack as next literal pointer
; and the stack value - result pointer -
; to HL.
exx ; switch to alternate set.
pop hl ; restore next literal pointer from stack
; to H'L'.
exx ; switch back to main set.
ld b,a ; zero count to B
xor a ; clear accumulator
;; STK-ZEROS
STK_ZEROS:
dec b ; decrement B counter
ret z ; return if zero. >>
; DE points to new STKEND
; HL to new number.
ldi (de),a ; else load zero to destination
; increase destination
jr STK_ZEROS ; loop back to STK-ZEROS until done.
; -------------------------------
; THE 'SKIP CONSTANTS' SUBROUTINE
; -------------------------------
; This routine traverses variable-length entries in the table of constants,
; stacking intermediate, unwanted constants onto a dummy calculator stack,
; in the first five bytes of ROM. The destination DE normally points to the
; end of the calculator stack which might be in the normal place or in the
; system variables area during E-LINE-NO; INT-TO-FP; stk-ten. In any case,
; it would be simpler all round if the routine just shoved unwanted values
; where it is going to stick the wanted value. The instruction LD DE, $0000
; can be removed.
;; SKIP-CONS
SKIP_CONS:
and a ; test if initially zero.
;; SKIP-NEXT
SKIP_NEXT:
ret z ; return if zero. >>
push af ; save count.
push de ; and normal STKEND
ld de,0x0000 ; dummy value for STKEND at start of ROM
; Note. not a fault but this has to be
; moved elsewhere when running in RAM.
; e.g. with Expandor Systems 'Soft ROM'.
; Better still, write to the normal place.
call STK_CONST ; routine STK-CONST works through variable
; length records.
pop de ; restore real STKEND
pop af ; restore count
dec a ; decrease
jr SKIP_NEXT ; loop back to SKIP-NEXT
; ------------------------------
; THE 'LOCATE MEMORY' SUBROUTINE
; ------------------------------
; This routine, when supplied with a base address in HL and an index in A,
; will calculate the address of the A'th entry, where each entry occupies
; five bytes. It is used for reading the semi-tone table and addressing
; floating-point numbers in the calculator's memory area.
; It is not possible to use this routine for the table of constants as these
; six values are held in compressed format.
;; LOC-MEM
LOC_MEM:
ld c,a ; store the original number $00-$1F.
rlca ; X2 - double.
rlca ; X4 - quadruple.
add a,c ; X5 - now add original to multiply by five.
ld c,a ; place the result in the low byte.
ld b,0x00 ; set high byte to zero.
add hl,bc ; add to form address of start of number in HL.
ret ; return.
; ------------------------------
; Get from memory area ($E0 etc.)
; ------------------------------
; Literals $E0 to $FF
; A holds $00-$1F offset.
; The calculator stack increases by 5 bytes.
;; get-mem-xx
get_mem_xx:
push de ; save STKEND
ld hl,(MEM) ; MEM is base address of the memory cells.
call LOC_MEM ; routine LOC-MEM so that HL = first byte
call MOVE_FP ; routine MOVE-FP moves 5 bytes with memory
; check.
; DE now points to new STKEND.
pop hl ; original STKEND is now RESULT pointer.
ret ; return.
; --------------------------
; Stack a constant (A0 etc.)
; --------------------------
; This routine allows a one-byte instruction to stack up to 32 constants
; held in short form in a table of constants. In fact only 5 constants are
; required. On entry the A register holds the literal ANDed with 1F.
; It isn't very efficient and it would have been better to hold the
; numbers in full, five byte form and stack them in a similar manner
; to that used for semi-tone table values.
;; stk-const-xx
stk_const_xx:
ld hl,de ; save STKEND - required for result
exx ; swap
push hl ; save pointer to next literal
ld hl,stk_zero ; Address: stk-zero - start of table of
; constants
exx
call SKIP_CONS ; routine SKIP-CONS
call STK_CONST ; routine STK-CONST
exx
pop hl ; restore pointer to next literal.
exx
ret ; return.
; --------------------------------
; Store in a memory area ($C0 etc.)
; --------------------------------
; Offsets $C0 to $DF
; Although 32 memory storage locations can be addressed, only six
; $C0 to $C5 are required by the ROM and only the thirty bytes (6*5)
; required for these are allocated. Spectrum programmers who wish to
; use the floating point routines from assembly language may wish to
; alter the system variable MEM to point to 160 bytes of RAM to have
; use the full range available.
; A holds the derived offset $00-$1F.
; This is a unary operation, so on entry HL points to the last value and DE
; points to STKEND.
;; st-mem-xx
st_mem_xx:
push hl ; save the result pointer.
ex de,hl ; transfer to DE.
ld hl,(MEM) ; fetch MEM the base of memory area.
call LOC_MEM ; routine LOC-MEM sets HL to the destination.
ex de,hl ; swap - HL is start, DE is destination.
call MOVE_FP ; routine MOVE-FP.
; note. a short ld bc,5; ldir
; the embedded memory check is not required
; so these instructions would be faster.
ex de,hl ; DE = STKEND
pop hl ; restore original result pointer
ret ; return.
; -------------------------
; THE 'EXCHANGE' SUBROUTINE
; -------------------------
; (offset: $01 'exchange')
; This routine swaps the last two values on the calculator stack.
; On entry, as always with binary operations,
; HL=first number, DE=second number
; On exit, HL=result, DE=stkend.
;; exchange
exchange:
ld b,0x05 ; there are five bytes to be swapped
; start of loop.
;; SWAP-BYTE
SWAP_BYTE:
ld a,(de) ; each byte of second
ld c,(hl) ; each byte of first
ex de,hl ; swap pointers
ld (de),a ; store each byte of first
ldi (hl),c ; store each byte of second
; advance both
inc de ; pointers.
djnz SWAP_BYTE ; loop back to SWAP-BYTE until all 5 done.
ex de,hl ; even up the exchanges so that DE addresses
; STKEND.
ret ; return.
; ------------------------------
; THE 'SERIES GENERATOR' ROUTINE
; ------------------------------
; (offset: $86 'series-06')
; (offset: $88 'series-08')
; (offset: $8C 'series-0C')
; The Spectrum uses Chebyshev polynomials to generate approximations for
; SIN, ATN, LN and EXP. These are named after the Russian mathematician
; Pafnuty Chebyshev, born in 1821, who did much pioneering work on numerical
; series. As far as calculators are concerned, Chebyshev polynomials have an
; advantage over other series, for example the Taylor series, as they can
; reach an approximation in just six iterations for SIN, eight for EXP and
; twelve for LN and ATN. The mechanics of the routine are interesting but
; for full treatment of how these are generated with demonstrations in
; Sinclair BASIC see "The Complete Spectrum ROM Disassembly" by Dr Ian Logan
; and Dr Frank O'Hara, published 1983 by Melbourne House.
;; series-xx
series_xx:
ld b,a ; parameter $00 - $1F to B counter
call GEN_ENT_1 ; routine GEN-ENT-1 is called.
; A recursive call to a special entry point
; in the calculator that puts the B register
; in the system variable BREG. The return
; address is the next location and where
; the calculator will expect its first
; instruction - now pointed to by HL'.
; The previous pointer to the series of
; five-byte numbers goes on the machine stack.
; The initialization phase.
defb 0x31 ; ;duplicate x,x
defb 0x0F ; ;addition x+x
defb 0xC0 ; ;st-mem-0 x+x
defb 0x02 ; ;delete .
defb 0xA0 ; ;stk-zero 0
defb 0xC2 ; ;st-mem-2 0
; a loop is now entered to perform the algebraic calculation for each of
; the numbers in the series
;; G-LOOP
defb 0x31 ; ;duplicate v,v.
defb 0xE0 ; ;get-mem-0 v,v,x+2
defb 0x04 ; ;multiply v,v*x+2
defb 0xE2 ; ;get-mem-2 v,v*x+2,v
defb 0xC1 ; ;st-mem-1
defb 0x03 ; ;subtract
defb 0x38 ; ;end-calc
; the previous pointer is fetched from the machine stack to H'L' where it
; addresses one of the numbers of the series following the series literal.
call stk_data ; routine STK-DATA is called directly to
; push a value and advance H'L'.
call GEN_ENT_2 ; routine GEN-ENT-2 recursively re-enters
; the calculator without disturbing
; system variable BREG
; H'L' value goes on the machine stack and is
; then loaded as usual with the next address.
defb 0x0F ; ;addition
defb 0x01 ; ;exchange
defb 0xC2 ; ;st-mem-2
defb 0x02 ; ;delete
defb 0x35 ; ;dec-jr-nz
defb 0xEE ; ;back to L3453, G-LOOP
; when the counted loop is complete the final subtraction yields the result
; for example SIN X.
defb 0xE1 ; ;get-mem-1
defb 0x03 ; ;subtract
defb 0x38 ; ;end-calc
ret ; return with H'L' pointing to location
; after last number in series.
; ---------------------------------
; THE 'ABSOLUTE MAGNITUDE' FUNCTION
; ---------------------------------
; (offset: $2A 'abs')
; This calculator literal finds the absolute value of the last value,
; integer or floating point, on calculator stack.
;; abs
abs:
ld b,0xFF ; signal abs
jr NEG_TEST ; forward to NEG-TEST
; ---------------------------
; THE 'UNARY MINUS' OPERATION
; ---------------------------
; (offset: $1B 'negate')
; Unary so on entry HL points to last value, DE to STKEND.
;; NEGATE
;; negate
negate:
call TEST_ZERO ; call routine TEST-ZERO and
ret c ; return if so leaving zero unchanged.
ld b,0x00 ; signal negate required before joining
; common code.
;; NEG-TEST
NEG_TEST:
ld a,(hl) ; load first byte and
and a ; test for zero
jr z,INT_CASE ; forward to INT-CASE if a small integer
; for floating point numbers a single bit denotes the sign.
inc hl ; address the first byte of mantissa.
ld a,b ; action flag $FF=abs, $00=neg.
and 0x80 ; now $80 $00
or (hl) ; sets bit 7 for abs
rla ; sets carry for abs and if number negative
ccf ; complement carry flag
rra ; and rotate back in altering sign
ldd (hl),a ; put the altered adjusted number back
; HL points to result
ret ; return with DE unchanged
; ---
; for integer numbers an entire byte denotes the sign.
;; INT-CASE
INT_CASE:
push de ; save STKEND.
push hl ; save pointer to the last value/result.
call INT_FETCH ; routine INT-FETCH puts integer in DE
; and the sign in C.
pop hl ; restore the result pointer.
ld a,b ; $FF=abs, $00=neg
or c ; $FF for abs, no change neg
cpl ; $00 for abs, switched for neg
ld c,a ; transfer result to sign byte.
call INT_STORE ; routine INT-STORE to re-write the integer.
pop de ; restore STKEND.
ret ; return.
; ---------------------
; THE 'SIGNUM' FUNCTION
; ---------------------
; (offset: $29 'sgn')
; This routine replaces the last value on the calculator stack,
; which may be in floating point or integer form, with the integer values
; zero if zero, with one if positive and with -minus one if negative.
;; sgn
sgn:
call TEST_ZERO ; call routine TEST-ZERO and
ret c ; exit if so as no change is required.
push de ; save pointer to STKEND.
ld de,0x0001 ; the result will be 1.
inc hl ; skip over the exponent.
rl (hl) ; rotate the sign bit into the carry flag.
dec hl ; step back to point to the result.
sbc a,a ; byte will be $FF if negative, $00 if positive.
ld c,a ; store the sign byte in the C register.
call INT_STORE ; routine INT-STORE to overwrite the last
; value with 0001 and sign.
pop de ; restore STKEND.
ret ; return.
; -----------------
; THE 'IN' FUNCTION
; -----------------
; (offset: $2C 'in')
; This function reads a byte from an input port.
;; in
in_func:
call FIND_INT2 ; Routine FIND-INT2 puts port address in BC.
; All 16 bits are put on the address line.
in a,(c) ; Read the port.
jr IN_PK_STK ; exit to STACK-A (via IN-PK-STK to save a byte
; of instruction code).
; -------------------
; THE 'PEEK' FUNCTION
; -------------------
; (offset: $2B 'peek')
; This function returns the contents of a memory address.
; The entire address space can be peeked including the ROM.
;; peek
peek:
call FIND_INT2 ; routine FIND-INT2 puts address in BC.
ld a,(bc) ; load contents into A register.
;; IN-PK-STK
IN_PK_STK:
jp STACK_A ; exit via STACK-A to put the value on the
; calculator stack.
; ------------------
; THE 'USR' FUNCTION
; ------------------
; (offset: $2d 'usr-no')
; The USR function followed by a number 0-65535 is the method by which
; the Spectrum invokes machine code programs. This function returns the
; contents of the BC register pair.
; Note. that STACK-BC re-initializes the IY register if a user-written
; program has altered it.
;; usr-no
usr_no:
call FIND_INT2 ; routine FIND-INT2 to fetch the
; supplied address into BC.
ld hl,STACK_BC ; address: STACK-BC is
push hl ; pushed onto the machine stack.
push bc ; then the address of the machine code
; routine.
ret ; make an indirect jump to the routine
; and, hopefully, to STACK-BC also.
; -------------------------
; THE 'USR STRING' FUNCTION
; -------------------------
; (offset: $19 'usr-$')
; The user function with a one-character string argument, calculates the
; address of the User Defined Graphic character that is in the string.
; As an alternative, the ASCII equivalent, upper or lower case,
; may be supplied. This provides a user-friendly method of redefining
; the 21 User Definable Graphics e.g.
; POKE USR "a", BIN 10000000 will put a dot in the top left corner of the
; character 144.
; Note. the curious double check on the range. With 26 UDGs the first check
; only is necessary. With anything less the second check only is required.
; It is highly likely that the first check was written by Steven Vickers.
;; usr-$
usr__:
call STK_FETCH ; routine STK-FETCH fetches the string
; parameters.
dec bc ; decrease BC by
ld a,b ; one to test
or c ; the length.
jr nz,REPORT_A ; to REPORT-A if not a single character.
ld a,(de) ; fetch the character
call ALPHA ; routine ALPHA sets carry if 'A-Z' or 'a-z'.
jr c,USR_RANGE ; forward to USR-RANGE if ASCII.
sub 0x90 ; make UDGs range 0-20d
jr c,REPORT_A ; to REPORT-A if too low. e.g. usr " ".
cp 0x15 ; Note. this test is not necessary.
jr nc,REPORT_A ; to REPORT-A if higher than 20.
inc a ; make range 1-21d to match LSBs of ASCII
;; USR-RANGE
USR_RANGE:
dec a ; make range of bits 0-4 start at zero
add a,a ; multiply by eight
add a,a ; and lose any set bits
add a,a ; range now 0 - 25*8
cp 0xA8 ; compare to 21*8
jr nc,REPORT_A ; to REPORT-A if originally higher
; than 'U','u' or graphics U.
ld bc,(UDG) ; fetch the UDG system variable value.
add a,c ; add the offset to character
ld c,a ; and store back in register C.
jr nc,USR_STACK ; forward to USR-STACK if no overflow.
inc b ; increment high byte.
;; USR-STACK
USR_STACK:
jp STACK_BC ; jump back and exit via STACK-BC to store
; ---
;; REPORT-A
REPORT_A:
rst 0x08 ; ERROR-1
defb 0x09 ; Error Report: Invalid argument
; ------------------------------
; THE 'TEST FOR ZERO' SUBROUTINE
; ------------------------------
; Test if top value on calculator stack is zero. The carry flag is set if
; the last value is zero but no registers are altered.
; All five bytes will be zero but first four only need be tested.
; On entry, HL points to the exponent the first byte of the value.
;; TEST-ZERO
TEST_ZERO:
push hl ; preserve HL which is used to address.
push bc ; preserve BC which is used as a store.
ld b,a ; preserve A in B.
ldi a,(hl) ; load first byte to accumulator
; advance.
or (hl) ; OR with second byte and clear carry.
inc hl ; advance.
or (hl) ; OR with third byte.
inc hl ; advance.
or (hl) ; OR with fourth byte.
ld a,b ; restore A without affecting flags.
pop bc ; restore the saved
pop hl ; registers.
ret nz ; return if not zero and with carry reset.
scf ; set the carry flag.
ret ; return with carry set if zero.
; --------------------------------
; THE 'GREATER THAN ZERO' OPERATOR
; --------------------------------
; (offset: $37 'greater-0' )
; Test if the last value on the calculator stack is greater than zero.
; This routine is also called directly from the end-tests of the comparison
; routine.
;; GREATER-0
;; greater-0
greater_0:
call TEST_ZERO ; routine TEST-ZERO
ret c ; return if was zero as this
; is also the Boolean 'false' value.
ld a,0xFF ; prepare XOR mask for sign bit
jr SIGN_TO_C ; forward to SIGN-TO-C
; to put sign in carry
; (carry will become set if sign is positive)
; and then overwrite location with 1 or 0
; as appropriate.
; ------------------
; THE 'NOT' FUNCTION
; ------------------
; (offset: $30 'not')
; This overwrites the last value with 1 if it was zero else with zero
; if it was any other value.
;
; e.g. NOT 0 returns 1, NOT 1 returns 0, NOT -3 returns 0.
;
; The subroutine is also called directly from the end-tests of the comparison
; operator.
;; NOT
;; not
not:
call TEST_ZERO ; routine TEST-ZERO sets carry if zero
jr FP_0_1 ; to FP-0/1 to overwrite operand with
; 1 if carry is set else to overwrite with zero.
; ------------------------------
; THE 'LESS THAN ZERO' OPERATION
; ------------------------------
; (offset: $36 'less-0' )
; Destructively test if last value on calculator stack is less than zero.
; Bit 7 of second byte will be set if so.
;; less-0
less_0:
xor a ; set XOR mask to zero
; (carry will become set if sign is negative).
; transfer sign of mantissa to Carry Flag.
;; SIGN-TO-C
SIGN_TO_C:
inc hl ; address 2nd byte.
xor (hl) ; bit 7 of HL will be set if number is negative.
dec hl ; address 1st byte again.
rlca ; rotate bit 7 of A to carry.
; ----------------------------
; THE 'ZERO OR ONE' SUBROUTINE
; ----------------------------
; This routine places an integer value of zero or one at the addressed
; location of the calculator stack or MEM area. The value one is written if
; carry is set on entry else zero.
;; FP-0/1
FP_0_1:
push hl ; save pointer to the first byte
ld a,0x00 ; load accumulator with zero - without
; disturbing flags.
ldi (hl),a ; zero to first byte
; address next
ldi (hl),a ; zero to 2nd byte
; address low byte of integer
rla ; carry to bit 0 of A
ld (hl),a ; load one or zero to low byte.
rra ; restore zero to accumulator.
inc hl ; address high byte of integer.
ldi (hl),a ; put a zero there.
; address fifth byte.
ld (hl),a ; put a zero there.
pop hl ; restore pointer to the first byte.
ret ; return.
; -----------------
; THE 'OR' OPERATOR
; -----------------
; (offset: $07 'or' )
; The Boolean OR operator. e.g. X OR Y
; The result is zero if both values are zero else a non-zero value.
;
; e.g. 0 OR 0 returns 0.
; -3 OR 0 returns -3.
; 0 OR -3 returns 1.
; -3 OR 2 returns 1.
;
; A binary operation.
; On entry HL points to first operand (X) and DE to second operand (Y).
;; or
or_func:
ex de,hl ; make HL point to second number
call TEST_ZERO ; routine TEST-ZERO
ex de,hl ; restore pointers
ret c ; return if result was zero - first operand,
; now the last value, is the result.
scf ; set carry flag
jr FP_0_1 ; back to FP-0/1 to overwrite the first operand
; with the value 1.
; ---------------------------------
; THE 'NUMBER AND NUMBER' OPERATION
; ---------------------------------
; (offset: $08 'no-&-no')
; The Boolean AND operator.
;
; e.g. -3 AND 2 returns -3.
; -3 AND 0 returns 0.
; 0 and -2 returns 0.
; 0 and 0 returns 0.
;
; Compare with OR routine above.
;; no-&-no
no___no:
ex de,hl ; make HL address second operand.
call TEST_ZERO ; routine TEST-ZERO sets carry if zero.
ex de,hl ; restore pointers.
ret nc ; return if second non-zero, first is result.
;
and a ; else clear carry.
jr FP_0_1 ; back to FP-0/1 to overwrite first operand
; with zero for return value.
; ---------------------------------
; THE 'STRING AND NUMBER' OPERATION
; ---------------------------------
; (offset: $10 'str-&-no')
; e.g. "You Win" AND score>99 will return the string if condition is true
; or the null string if false.
;; str-&-no
str___no:
ex de,hl ; make HL point to the number.
call TEST_ZERO ; routine TEST-ZERO.
ex de,hl ; restore pointers.
ret nc ; return if number was not zero - the string
; is the result.
; if the number was zero (false) then the null string must be returned by
; altering the length of the string on the calculator stack to zero.
push de ; save pointer to the now obsolete number
; (which will become the new STKEND)
dec de ; point to the 5th byte of string descriptor.
xor a ; clear the accumulator.
ldd (de),a ; place zero in high byte of length.
; address low byte of length.
ld (de),a ; place zero there - now the null string.
pop de ; restore pointer - new STKEND.
ret ; return.
; ---------------------------
; THE 'COMPARISON' OPERATIONS
; ---------------------------
; (offset: $0A 'no-gr-eql')
; (offset: $0B 'nos-neql')
; (offset: $0C 'no-grtr')
; (offset: $0D 'no-less')
; (offset: $0E 'nos-eql')
; (offset: $11 'str-l-eql')
; (offset: $12 'str-gr-eql')
; (offset: $13 'strs-neql')
; (offset: $14 'str-grtr')
; (offset: $15 'str-less')
; (offset: $16 'strs-eql')
; True binary operations.
; A single entry point is used to evaluate six numeric and six string
; comparisons. On entry, the calculator literal is in the B register and
; the two numeric values, or the two string parameters, are on the
; calculator stack.
; The individual bits of the literal are manipulated to group similar
; operations although the SUB 8 instruction does nothing useful and merely
; alters the string test bit.
; Numbers are compared by subtracting one from the other, strings are
; compared by comparing every character until a mismatch, or the end of one
; or both, is reached.
;
; Numeric Comparisons.
; --------------------
; The 'x>y' example is the easiest as it employs straight-thru logic.
; Number y is subtracted from x and the result tested for greater-0 yielding
; a final value 1 (true) or 0 (false).
; For 'x<y' the same logic is used but the two values are first swapped on the
; calculator stack.
; For 'x=y' NOT is applied to the subtraction result yielding true if the
; difference was zero and false with anything else.
; The first three numeric comparisons are just the opposite of the last three
; so the same processing steps are used and then a final NOT is applied.
;
; literal Test No sub 8 ExOrNot 1st RRCA exch sub ? End-Tests
; ========= ==== == ======== === ======== ======== ==== === = === === ===
; no-l-eql x<=y 09 00000001 dec 00000000 00000000 ---- x-y ? --- >0? NOT
; no-gr-eql x>=y 0A 00000010 dec 00000001 10000000c swap y-x ? --- >0? NOT
; nos-neql x<>y 0B 00000011 dec 00000010 00000001 ---- x-y ? NOT --- NOT
; no-grtr x>y 0C 00000100 - 00000100 00000010 ---- x-y ? --- >0? ---
; no-less x<y 0D 00000101 - 00000101 10000010c swap y-x ? --- >0? ---
; nos-eql x=y 0E 00000110 - 00000110 00000011 ---- x-y ? NOT --- ---
;
; comp -> C/F
; ==== ===
; str-l-eql x$<=y$ 11 00001001 dec 00001000 00000100 ---- x$y$ 0 !or >0? NOT
; str-gr-eql x$>=y$ 12 00001010 dec 00001001 10000100c swap y$x$ 0 !or >0? NOT
; strs-neql x$<>y$ 13 00001011 dec 00001010 00000101 ---- x$y$ 0 !or >0? NOT
; str-grtr x$>y$ 14 00001100 - 00001100 00000110 ---- x$y$ 0 !or >0? ---
; str-less x$<y$ 15 00001101 - 00001101 10000110c swap y$x$ 0 !or >0? ---
; strs-eql x$=y$ 16 00001110 - 00001110 00000111 ---- x$y$ 0 !or >0? ---
;
; String comparisons are a little different in that the eql/neql carry flag
; from the 2nd RRCA is, as before, fed into the first of the end tests but
; along the way it gets modified by the comparison process. The result on the
; stack always starts off as zero and the carry fed in determines if NOT is
; applied to it. So the only time the greater-0 test is applied is if the
; stack holds zero which is not very efficient as the test will always yield
; zero. The most likely explanation is that there were once separate end tests
; for numbers and strings.
;; no-l-eql,etc.
no_l_eql_etc_:
ld a,b ; transfer literal to accumulator.
sub 0x08 ; subtract eight - which is not useful.
bit 2,a ; isolate '>', '<', '='.
jr nz,EX_OR_NOT ; skip to EX-OR-NOT with these.
dec a ; else make $00-$02, $08-$0A to match bits 0-2.
;; EX-OR-NOT
EX_OR_NOT:
rrca ; the first RRCA sets carry for a swap.
jr nc,NU_OR_STR ; forward to NU-OR-STR with other 8 cases
; for the other 4 cases the two values on the calculator stack are exchanged.
push af ; save A and carry.
push hl ; save HL - pointer to first operand.
; (DE points to second operand).
call exchange ; routine exchange swaps the two values.
; (HL = second operand, DE = STKEND)
pop de ; DE = first operand
ex de,hl ; as we were.
pop af ; restore A and carry.
; Note. it would be better if the 2nd RRCA preceded the string test.
; It would save two duplicate bytes and if we also got rid of that sub 8
; at the beginning we wouldn't have to alter which bit we test.
;; NU-OR-STR
NU_OR_STR:
bit 2,a ; test if a string comparison.
jr nz,STRINGS ; forward to STRINGS if so.
; continue with numeric comparisons.
rrca ; 2nd RRCA causes eql/neql to set carry.
push af ; save A and carry
call subtract ; routine subtract leaves result on stack.
jr END_TESTS ; forward to END-TESTS
; ---
;; STRINGS
STRINGS:
rrca ; 2nd RRCA causes eql/neql to set carry.
push af ; save A and carry.
call STK_FETCH ; routine STK-FETCH gets 2nd string params
push de ; save start2 *.
push bc ; and the length.
call STK_FETCH ; routine STK-FETCH gets 1st string
; parameters - start in DE, length in BC.
pop hl ; restore length of second to HL.
; A loop is now entered to compare, by subtraction, each corresponding character
; of the strings. For each successful match, the pointers are incremented and
; the lengths decreased and the branch taken back to here. If both string
; remainders become null at the same time, then an exact match exists.
;; BYTE-COMP
BYTE_COMP:
ld a,h ; test if the second string
or l ; is the null string and hold flags.
ex (sp),hl ; put length2 on stack, bring start2 to HL *.
ld a,b ; hi byte of length1 to A
jr nz,SEC_PLUS ; forward to SEC-PLUS if second not null.
or c ; test length of first string.
;; SECND-LOW
SECND_LOW:
pop bc ; pop the second length off stack.
jr z,BOTH_NULL ; forward to BOTH-NULL if first string is also
; of zero length.
; the true condition - first is longer than second (SECND-LESS)
pop af ; restore carry (set if eql/neql)
ccf ; complement carry flag.
; Note. equality becomes false.
; Inequality is true. By swapping or applying
; a terminal 'not', all comparisons have been
; manipulated so that this is success path.
jr STR_TEST ; forward to leave via STR-TEST
; ---
; the branch was here with a match
;; BOTH-NULL
BOTH_NULL:
pop af ; restore carry - set for eql/neql
jr STR_TEST ; forward to STR-TEST
; ---
; the branch was here when 2nd string not null and low byte of first is yet
; to be tested.
;; SEC-PLUS
SEC_PLUS:
or c ; test the length of first string.
jr z,FRST_LESS ; forward to FRST-LESS if length is zero.
; both strings have at least one character left.
ld a,(de) ; fetch character of first string.
sub (hl) ; subtract with that of 2nd string.
jr c,FRST_LESS ; forward to FRST-LESS if carry set
jr nz,SECND_LOW ; back to SECND-LOW and then STR-TEST
; if not exact match.
dec bc ; decrease length of 1st string.
inc de ; increment 1st string pointer.
inc hl ; increment 2nd string pointer.
ex (sp),hl ; swap with length on stack
dec hl ; decrement 2nd string length
jr BYTE_COMP ; back to BYTE-COMP
; ---
; the false condition.
;; FRST-LESS
FRST_LESS:
pop bc ; discard length
pop af ; pop A
and a ; clear the carry for false result.
; ---
; exact match and x$>y$ rejoin here
;; STR-TEST
STR_TEST:
push af ; save A and carry
rst 0x28 ; ; FP-CALC
defb 0xA0 ; ;stk-zero an initial false value.
defb 0x38 ; ;end-calc
; both numeric and string paths converge here.
;; END-TESTS
END_TESTS:
pop af ; pop carry - will be set if eql/neql
push af ; save it again.
call c,not ; routine NOT sets true(1) if equal(0)
; or, for strings, applies true result.
pop af ; pop carry and
push af ; save A
call nc,greater_0 ; routine GREATER-0 tests numeric subtraction
; result but also needlessly tests the string
; value for zero - it must be.
pop af ; pop A
rrca ; the third RRCA - test for '<=', '>=' or '<>'.
call nc,not ; apply a terminal NOT if so.
ret ; return.
; ------------------------------------
; THE 'STRING CONCATENATION' OPERATION
; ------------------------------------
; (offset: $17 'strs-add')
; This literal combines two strings into one e.g. LET a$ = b$ + c$
; The two parameters of the two strings to be combined are on the stack.
;; strs-add
strs_add:
call STK_FETCH ; routine STK-FETCH fetches string parameters
; and deletes calculator stack entry.
push de ; save start address.
push bc ; and length.
call STK_FETCH ; routine STK-FETCH for first string
pop hl ; re-fetch first length
push hl ; and save again
push de ; save start of second string
push bc ; and its length.
add hl,bc ; add the two lengths.
ld bc,hl ; transfer to BC
; and create
rst 0x30 ; BC-SPACES in workspace.
; DE points to start of space.
call STK_STO__ ; routine STK-STO-$ stores parameters
; of new string updating STKEND.
pop bc ; length of first
pop hl ; address of start
ld a,b ; test for
or c ; zero length.
jr z,OTHER_STR ; to OTHER-STR if null string
ldir ; copy string to workspace.
;; OTHER-STR
OTHER_STR:
pop bc ; now second length
pop hl ; and start of string
ld a,b ; test this one
or c ; for zero length
jr z,STK_PNTRS ; skip forward to STK-PNTRS if so as complete.
ldir ; else copy the bytes.
; and continue into next routine which
; sets the calculator stack pointers.
; -----------------------------------
; THE 'SET STACK POINTERS' SUBROUTINE
; -----------------------------------
; Register DE is set to STKEND and HL, the result pointer, is set to five
; locations below this.
; This routine is used when it is inconvenient to save these values at the
; time the calculator stack is manipulated due to other activity on the
; machine stack.
; This routine is also used to terminate the VAL and READ-IN routines for
; the same reason and to initialize the calculator stack at the start of
; the CALCULATE routine.
;; STK-PNTRS
STK_PNTRS:
ld hl,(STKEND) ; fetch STKEND value from system variable.
ld de,0xFFFB ; the value -5
push hl ; push STKEND value.
add hl,de ; subtract 5 from HL.
pop de ; pop STKEND to DE.
ret ; return.
; -------------------
; THE 'CHR$' FUNCTION
; -------------------
; (offset: $2f 'chr$')
; This function returns a single character string that is a result of
; converting a number in the range 0-255 to a string e.g. CHR$ 65 = "A".
;; chrs
chrs:
call FP_TO_A ; routine FP-TO-A puts the number in A.
jr c,REPORT_Bd ; forward to REPORT-Bd if overflow
jr nz,REPORT_Bd ; forward to REPORT-Bd if negative
push af ; save the argument.
ld bc,0x0001 ; one space required.
rst 0x30 ; BC-SPACES makes DE point to start
pop af ; restore the number.
ld (de),a ; and store in workspace
call STK_STO__ ; routine STK-STO-$ stacks descriptor.
ex de,hl ; make HL point to result and DE to STKEND.
ret ; return.
; ---
;; REPORT-Bd
REPORT_Bd:
rst 0x08 ; ERROR-1
defb 0x0A ; Error Report: Integer out of range
; ----------------------------
; THE 'VAL and VAL$' FUNCTIONS
; ----------------------------
; (offset: $1d 'val')
; (offset: $18 'val$')
; VAL treats the characters in a string as a numeric expression.
; e.g. VAL "2.3" = 2.3, VAL "2+4" = 6, VAL ("2" + "4") = 24.
; VAL$ treats the characters in a string as a string expression.
; e.g. VAL$ (z$+"(2)") = a$(2) if z$ happens to be "a$".
;; val
;; val$
val_:
ld hl,(CH_ADD) ; fetch value of system variable CH_ADD
push hl ; and save on the machine stack.
ld a,b ; fetch the literal (either $1D or $18).
add a,0xE3 ; add $E3 to form $00 (setting carry) or $FB.
sbc a,a ; now form $FF bit 6 = numeric result
; or $00 bit 6 = string result.
push af ; save this mask on the stack
call STK_FETCH ; routine STK-FETCH fetches the string operand
; from calculator stack.
push de ; save the address of the start of the string.
inc bc ; increment the length for a carriage return.
rst 0x30 ; BC-SPACES creates the space in workspace.
pop hl ; restore start of string to HL.
ld (CH_ADD),de ; load CH_ADD with start DE in workspace.
push de ; save the start in workspace
ldir ; copy string from program or variables or
; workspace to the workspace area.
ex de,hl ; end of string + 1 to HL
dec hl ; decrement HL to point to end of new area.
ld (hl),0x0D ; insert a carriage return at end.
res 7,(iy+FLAGS-IY0) ; update FLAGS - signal checking syntax.
call SCANNING ; routine SCANNING evaluates string
; expression and result.
rst 0x18 ; GET-CHAR fetches next character.
cp 0x0D ; is it the expected carriage return ?
jr nz,V_RPORT_C ; forward to V-RPORT-C if not
; 'Nonsense in BASIC'.
pop hl ; restore start of string in workspace.
pop af ; restore expected result flag (bit 6).
xor (iy+FLAGS-IY0) ; xor with FLAGS now updated by SCANNING.
and 0x40 ; test bit 6 - should be zero if result types
; match.
;; V-RPORT-C
V_RPORT_C:
jp nz,REPORT_C ; jump back to REPORT-C with a result mismatch.
ld (CH_ADD),hl ; set CH_ADD to the start of the string again.
set 7,(iy+FLAGS-IY0) ; update FLAGS - signal running program.
call SCANNING ; routine SCANNING evaluates the string
; in full leaving result on calculator stack.
pop hl ; restore saved character address in program.
ld (CH_ADD),hl ; and reset the system variable CH_ADD.
jr STK_PNTRS ; back to exit via STK-PNTRS.
; resetting the calculator stack pointers
; HL and DE from STKEND as it wasn't possible
; to preserve them during this routine.
; -------------------
; THE 'STR$' FUNCTION
; -------------------
; (offset: $2e 'str$')
; This function produces a string comprising the characters that would appear
; if the numeric argument were printed.
; e.g. STR$ (1/10) produces "0.1".
;; str$
str_:
ld bc,0x0001 ; create an initial byte in workspace
rst 0x30 ; using BC-SPACES restart.
ld (K_CUR),hl ; set system variable K_CUR to new location.
push hl ; and save start on machine stack also.
ld hl,(CURCHL) ; fetch value of system variable CURCHL
push hl ; and save that too.
ld a,0xFF ; select system channel 'R'.
call CHAN_OPEN ; routine CHAN-OPEN opens it.
call PRINT_FP ; routine PRINT-FP outputs the number to
; workspace updating K-CUR.
pop hl ; restore current channel.
call CHAN_FLAG ; routine CHAN-FLAG resets flags.
pop de ; fetch saved start of string to DE.
ld hl,(K_CUR) ; load HL with end of string from K_CUR.
and a ; prepare for true subtraction.
sbc hl,de ; subtract start from end to give length.
ld bc,hl ; transfer the length to
; the BC register pair.
call STK_STO__ ; routine STK-STO-$ stores string parameters
; on the calculator stack.
ex de,hl ; HL = last value, DE = STKEND.
ret ; return.
; ------------------------
; THE 'READ-IN' SUBROUTINE
; ------------------------
; (offset: $1a 'read-in')
; This is the calculator literal used by the INKEY$ function when a '#'
; is encountered after the keyword.
; INKEY$ # does not interact correctly with the keyboard, #0 or #1, and
; its uses are for other channels.
;; read-in
read_in:
call FIND_INT1 ; routine FIND-INT1 fetches stream to A
cp 0x10 ; compare with 16 decimal.
jp nc,REPORT_Bb ; JUMP to REPORT-Bb if not in range 0 - 15.
; 'Integer out of range'
; (REPORT-Bd is within range)
ld hl,(CURCHL) ; fetch current channel CURCHL
push hl ; save it
call CHAN_OPEN ; routine CHAN-OPEN opens channel
call INPUT_AD ; routine INPUT-AD - the channel must have an
; input stream or else error here from stream
; stub.
ld bc,0x0000 ; initialize length of string to zero
jr nc,R_I_STORE ; forward to R-I-STORE if no key detected.
inc c ; increase length to one.
rst 0x30 ; BC-SPACES creates space for one character
; in workspace.
ld (de),a ; the character is inserted.
;; R-I-STORE
R_I_STORE:
call STK_STO__ ; routine STK-STO-$ stacks the string
; parameters.
pop hl ; restore current channel address
call CHAN_FLAG ; routine CHAN-FLAG resets current channel
; system variable and flags.
jp STK_PNTRS ; jump back to STK-PNTRS
; -------------------
; THE 'CODE' FUNCTION
; -------------------
; (offset: $1c 'code')
; Returns the ASCII code of a character or first character of a string
; e.g. CODE "Aardvark" = 65, CODE "" = 0.
;; code
code:
call STK_FETCH ; routine STK-FETCH to fetch and delete the
; string parameters.
; DE points to the start, BC holds the length.
ld a,b ; test length
or c ; of the string.
jr z,STK_CODE ; skip to STK-CODE with zero if the null string.
ld a,(de) ; else fetch the first character.
;; STK-CODE
STK_CODE:
jp STACK_A ; jump back to STACK-A (with memory check)
; ------------------
; THE 'LEN' FUNCTION
; ------------------
; (offset: $1e 'len')
; Returns the length of a string.
; In Sinclair BASIC strings can be more than twenty thousand characters long
; so a sixteen-bit register is required to store the length
;; len
len:
call STK_FETCH ; Routine STK-FETCH to fetch and delete the
; string parameters from the calculator stack.
; Register BC now holds the length of string.
jp STACK_BC ; Jump back to STACK-BC to save result on the
; calculator stack (with memory check).
; -------------------------------------
; THE 'DECREASE THE COUNTER' SUBROUTINE
; -------------------------------------
; (offset: $35 'dec-jr-nz')
; The calculator has an instruction that decrements a single-byte
; pseudo-register and makes consequential relative jumps just like
; the Z80's DJNZ instruction.
;; dec-jr-nz
dec_jr_nz:
exx ; switch in set that addresses code
push hl ; save pointer to offset byte
ld hl,BREG ; address BREG in system variables
dec (hl) ; decrement it
pop hl ; restore pointer
jr nz,JUMP_2 ; to JUMP-2 if not zero
inc hl ; step past the jump length.
exx ; switch in the main set.
ret ; return.
; Note. as a general rule the calculator avoids using the IY register
; otherwise the cumbersome 4 instructions in the middle could be replaced by
; dec (iy+$2d) - three bytes instead of six.
; ---------------------
; THE 'JUMP' SUBROUTINE
; ---------------------
; (offset: $33 'jump')
; This enables the calculator to perform relative jumps just like the Z80
; chip's JR instruction.
;; jump
;; JUMP
JUMP:
exx ; switch in pointer set
;; JUMP-2
JUMP_2:
ld e,(hl) ; the jump byte 0-127 forward, 128-255 back.
ld a,e ; transfer to accumulator.
rla ; if backward jump, carry is set.
sbc a,a ; will be $FF if backward or $00 if forward.
ld d,a ; transfer to high byte.
add hl,de ; advance calculator pointer forward or back.
exx ; switch back.
ret ; return.
; --------------------------
; THE 'JUMP-TRUE' SUBROUTINE
; --------------------------
; (offset: $00 'jump-true')
; This enables the calculator to perform conditional relative jumps dependent
; on whether the last test gave a true result.
;; jump-true
jump_true:
inc de ; Collect the
inc de ; third byte
ldd a,(de) ; of the test
; result and
dec de ; backtrack.
and a ; Is result 0 or 1 ?
jr nz,JUMP ; Back to JUMP if true (1).
exx ; Else switch in the pointer set.
inc hl ; Step past the jump length.
exx ; Switch in the main set.
ret ; Return.
; -------------------------
; THE 'END-CALC' SUBROUTINE
; -------------------------
; (offset: $38 'end-calc')
; The end-calc literal terminates a mini-program written in the Spectrum's
; internal language.
;; end-calc
end_calc:
pop af ; Drop the calculator return address RE-ENTRY
exx ; Switch to the other set.
ex (sp),hl ; Transfer H'L' to machine stack for the
; return address.
; When exiting recursion, then the previous
; pointer is transferred to H'L'.
exx ; Switch back to main set.
ret ; Return.
; ------------------------
; THE 'MODULUS' SUBROUTINE
; ------------------------
; (offset: $32 'n-mod-m')
; (n1,n2 -- r,q)
; Similar to FORTH's 'divide mod' /MOD
; On the Spectrum, this is only used internally by the RND function and could
; have been implemented inline. On the ZX81, this calculator routine was also
; used by PRINT-FP.
;; n-mod-m
n_mod_m:
rst 0x28 ; ; FP-CALC 17, 3.
defb 0xC0 ; ;st-mem-0 17, 3.
defb 0x02 ; ;delete 17.
defb 0x31 ; ;duplicate 17, 17.
defb 0xE0 ; ;get-mem-0 17, 17, 3.
defb 0x05 ; ;division 17, 17/3.
defb 0x27 ; ;int 17, 5.
defb 0xE0 ; ;get-mem-0 17, 5, 3.
defb 0x01 ; ;exchange 17, 3, 5.
defb 0xC0 ; ;st-mem-0 17, 3, 5.
defb 0x04 ; ;multiply 17, 15.
defb 0x03 ; ;subtract 2.
defb 0xE0 ; ;get-mem-0 2, 5.
defb 0x38 ; ;end-calc 2, 5.
ret ; return.
; ------------------
; THE 'INT' FUNCTION
; ------------------
; (offset $27: 'int' )
; This function returns the integer of x, which is just the same as truncate
; for positive numbers. The truncate literal truncates negative numbers
; upwards so that -3.4 gives -3 whereas the BASIC INT function has to
; truncate negative numbers down so that INT -3.4 is -4.
; It is best to work through using, say, +-3.4 as examples.
;; int
int:
rst 0x28 ; ; FP-CALC x. (= 3.4 or -3.4).
defb 0x31 ; ;duplicate x, x.
defb 0x36 ; ;less-0 x, (1/0)
defb 0x00 ; ;jump-true x, (1/0)
defb 0x04 ; ;to L36B7, X-NEG
defb 0x3A ; ;truncate trunc 3.4 = 3.
defb 0x38 ; ;end-calc 3.
ret ; return with + int x on stack.
; ---
;; X-NEG
X_NEG:
defb 0x31 ; ;duplicate -3.4, -3.4.
defb 0x3A ; ;truncate -3.4, -3.
defb 0xC0 ; ;st-mem-0 -3.4, -3.
defb 0x03 ; ;subtract -.4
defb 0xE0 ; ;get-mem-0 -.4, -3.
defb 0x01 ; ;exchange -3, -.4.
defb 0x30 ; ;not -3, (0).
defb 0x00 ; ;jump-true -3.
defb 0x03 ; ;to L36C2, EXIT -3.
defb 0xA1 ; ;stk-one -3, 1.
defb 0x03 ; ;subtract -4.
;; EXIT
EXIT:
defb 0x38 ; ;end-calc -4.
ret ; return.
; ------------------
; THE 'EXP' FUNCTION
; ------------------
; (offset $26: 'exp')
; The exponential function EXP x is equal to e^x, where e is the mathematical
; name for a number approximated to 2.718281828.
; ERROR 6 if argument is more than about 88.
;; EXP
;; exp
exp:
rst 0x28 ; ; FP-CALC
defb 0x3D ; ;re-stack (not required - mult will do)
defb 0x34 ; ;stk-data
defb 0xF1 ; ;Exponent: $81, Bytes: 4
defb 0x38,0xAA,0x3B,0x29
; ;
defb 0x04 ; ;multiply
defb 0x31 ; ;duplicate
defb 0x27 ; ;int
defb 0xC3 ; ;st-mem-3
defb 0x03 ; ;subtract
defb 0x31 ; ;duplicate
defb 0x0F ; ;addition
defb 0xA1 ; ;stk-one
defb 0x03 ; ;subtract
defb 0x88 ; ;series-08
defb 0x13 ; ;Exponent: $63, Bytes: 1
defb 0x36 ; ;(+00,+00,+00)
defb 0x58 ; ;Exponent: $68, Bytes: 2
defb 0x65,0x66 ; ;(+00,+00)
defb 0x9D ; ;Exponent: $6D, Bytes: 3
defb 0x78,0x65,0x40 ; ;(+00)
defb 0xA2 ; ;Exponent: $72, Bytes: 3
defb 0x60,0x32,0xC9 ; ;(+00)
defb 0xE7 ; ;Exponent: $77, Bytes: 4
defb 0x21,0xF7,0xAF,0x24
; ;
defb 0xEB ; ;Exponent: $7B, Bytes: 4
defb 0x2F,0xB0,0xB0,0x14
; ;
defb 0xEE ; ;Exponent: $7E, Bytes: 4
defb 0x7E,0xBB,0x94,0x58
; ;
defb 0xF1 ; ;Exponent: $81, Bytes: 4
defb 0x3A,0x7E,0xF8,0xCF
; ;
defb 0xE3 ; ;get-mem-3
defb 0x38 ; ;end-calc
call FP_TO_A ; routine FP-TO-A
jr nz,N_NEGTV ; to N-NEGTV
jr c,REPORT_6b ; to REPORT-6b
; 'Number too big'
add a,(hl)
jr nc,RESULT_OK ; to RESULT-OK
;; REPORT-6b
REPORT_6b:
rst 0x08 ; ERROR-1
defb 0x05 ; Error Report: Number too big
; ---
;; N-NEGTV
N_NEGTV:
jr c,RSLT_ZERO ; to RSLT-ZERO
sub (hl)
jr nc,RSLT_ZERO ; to RSLT-ZERO
neg ; Negate
;; RESULT-OK
RESULT_OK:
ld (hl),a
ret ; return.
; ---
;; RSLT-ZERO
RSLT_ZERO:
rst 0x28 ; ; FP-CALC
defb 0x02 ; ;delete
defb 0xA0 ; ;stk-zero
defb 0x38 ; ;end-calc
ret ; return.
; --------------------------------
; THE 'NATURAL LOGARITHM' FUNCTION
; --------------------------------
; (offset $25: 'ln')
; Function to calculate the natural logarithm (to the base e ).
; Natural logarithms were devised in 1614 by well-traveled Scotsman John
; Napier who noted
; "Nothing doth more molest and hinder calculators than the multiplications,
; divisions, square and cubical extractions of great numbers".
;
; Napier's logarithms enabled the above operations to be accomplished by
; simple addition and subtraction simplifying the navigational and
; astronomical calculations which beset his age.
; Napier's logarithms were quickly overtaken by logarithms to the base 10
; devised, in conjunction with Napier, by Henry Briggs a Cambridge-educated
; professor of Geometry at Oxford University. These simplified the layout
; of the tables enabling humans to easily scale calculations.
;
; It is only recently with the introduction of pocket calculators and machines
; like the ZX Spectrum that natural logarithms are once more at the fore,
; although some computers retain logarithms to the base ten.
;
; 'Natural' logarithms are powers to the base 'e', which like 'pi' is a
; naturally occurring number in branches of mathematics.
; Like 'pi' also, 'e' is an irrational number and starts 2.718281828...
;
; The tabular use of logarithms was that to multiply two numbers one looked
; up their two logarithms in the tables, added them together and then looked
; for the result in a table of antilogarithms to give the desired product.
;
; The EXP function is the BASIC equivalent of a calculator's 'antiln' function
; and by picking any two numbers, 1.72 and 6.89 say,
; 10 PRINT EXP ( LN 1.72 + LN 6.89 )
; will give just the same result as
; 20 PRINT 1.72 * 6.89.
; Division is accomplished by subtracting the two logs.
;
; Napier also mentioned "square and cubicle extractions".
; To raise a number to the power 3, find its 'ln', multiply by 3 and find the
; 'antiln'. e.g. PRINT EXP( LN 4 * 3 ) gives 64.
; Similarly to find the n'th root divide the logarithm by 'n'.
; The ZX81 ROM used PRINT EXP ( LN 9 / 2 ) to find the square root of the
; number 9. The Napieran square root function is just a special case of
; the 'to_power' function. A cube root or indeed any root/power would be just
; as simple.
; First test that the argument to LN is a positive, non-zero number.
; Error A if the argument is 0 or negative.
;; ln
ln:
rst 0x28 ; ; FP-CALC
defb 0x3D ; ;re-stack
defb 0x31 ; ;duplicate
defb 0x37 ; ;greater-0
defb 0x00 ; ;jump-true
defb 0x04 ; ;to L371C, VALID
defb 0x38 ; ;end-calc
;; REPORT-Ab
REPORT_Ab:
rst 0x08 ; ERROR-1
defb 0x09 ; Error Report: Invalid argument
;; VALID
VALID:
defb 0xA0 ; ;stk-zero Note. not
defb 0x02 ; ;delete necessary.
defb 0x38 ; ;end-calc
ld a,(hl)
ld (hl),0x80
call STACK_A ; routine STACK-A
rst 0x28 ; ; FP-CALC
defb 0x34 ; ;stk-data
defb 0x38 ; ;Exponent: $88, Bytes: 1
defb 0x00 ; ;(+00,+00,+00)
defb 0x03 ; ;subtract
defb 0x01 ; ;exchange
defb 0x31 ; ;duplicate
defb 0x34 ; ;stk-data
defb 0xF0 ; ;Exponent: $80, Bytes: 4
defb 0x4C,0xCC,0xCC,0xCD
; ;
defb 0x03 ; ;subtract
defb 0x37 ; ;greater-0
defb 0x00 ; ;jump-true
defb 0x08 ; ;to L373D, GRE.8
defb 0x01 ; ;exchange
defb 0xA1 ; ;stk-one
defb 0x03 ; ;subtract
defb 0x01 ; ;exchange
defb 0x38 ; ;end-calc
inc (hl)
rst 0x28 ; ; FP-CALC
;; GRE.8
GRE_8:
defb 0x01 ; ;exchange
defb 0x34 ; ;stk-data
defb 0xF0 ; ;Exponent: $80, Bytes: 4
defb 0x31,0x72,0x17,0xF8
; ;
defb 0x04 ; ;multiply
defb 0x01 ; ;exchange
defb 0xA2 ; ;stk-half
defb 0x03 ; ;subtract
defb 0xA2 ; ;stk-half
defb 0x03 ; ;subtract
defb 0x31 ; ;duplicate
defb 0x34 ; ;stk-data
defb 0x32 ; ;Exponent: $82, Bytes: 1
defb 0x20 ; ;(+00,+00,+00)
defb 0x04 ; ;multiply
defb 0xA2 ; ;stk-half
defb 0x03 ; ;subtract
defb 0x8C ; ;series-0C
defb 0x11 ; ;Exponent: $61, Bytes: 1
defb 0xAC ; ;(+00,+00,+00)
defb 0x14 ; ;Exponent: $64, Bytes: 1
defb 0x09 ; ;(+00,+00,+00)
defb 0x56 ; ;Exponent: $66, Bytes: 2
defb 0xDA,0xA5 ; ;(+00,+00)
defb 0x59 ; ;Exponent: $69, Bytes: 2
defb 0x30,0xC5 ; ;(+00,+00)
defb 0x5C ; ;Exponent: $6C, Bytes: 2
defb 0x90,0xAA ; ;(+00,+00)
defb 0x9E ; ;Exponent: $6E, Bytes: 3
defb 0x70,0x6F,0x61 ; ;(+00)
defb 0xA1 ; ;Exponent: $71, Bytes: 3
defb 0xCB,0xDA,0x96 ; ;(+00)
defb 0xA4 ; ;Exponent: $74, Bytes: 3
defb 0x31,0x9F,0xB4 ; ;(+00)
defb 0xE7 ; ;Exponent: $77, Bytes: 4
defb 0xA0,0xFE,0x5C,0xFC
; ;
defb 0xEA ; ;Exponent: $7A, Bytes: 4
defb 0x1B,0x43,0xCA,0x36
; ;
defb 0xED ; ;Exponent: $7D, Bytes: 4
defb 0xA7,0x9C,0x7E,0x5E
; ;
defb 0xF0 ; ;Exponent: $80, Bytes: 4
defb 0x6E,0x23,0x80,0x93
; ;
defb 0x04 ; ;multiply
defb 0x0F ; ;addition
defb 0x38 ; ;end-calc
ret ; return.
; -----------------------------
; THE 'TRIGONOMETRIC' FUNCTIONS
; -----------------------------
; Trigonometry is rocket science. It is also used by carpenters and pyramid
; builders.
; Some uses can be quite abstract but the principles can be seen in simple
; right-angled triangles. Triangles have some special properties -
;
; 1) The sum of the three angles is always PI radians (180 degrees).
; Very helpful if you know two angles and wish to find the third.
; 2) In any right-angled triangle the sum of the squares of the two shorter
; sides is equal to the square of the longest side opposite the right-angle.
; Very useful if you know the length of two sides and wish to know the
; length of the third side.
; 3) Functions sine, cosine and tangent enable one to calculate the length
; of an unknown side when the length of one other side and an angle is
; known.
; 4) Functions arcsin, arccosine and arctan enable one to calculate an unknown
; angle when the length of two of the sides is known.
; --------------------------------
; THE 'REDUCE ARGUMENT' SUBROUTINE
; --------------------------------
; (offset $39: 'get-argt')
;
; This routine performs two functions on the angle, in radians, that forms
; the argument to the sine and cosine functions.
; First it ensures that the angle 'wraps round'. That if a ship turns through
; an angle of, say, 3*PI radians (540 degrees) then the net effect is to turn
; through an angle of PI radians (180 degrees).
; Secondly it converts the angle in radians to a fraction of a right angle,
; depending within which quadrant the angle lies, with the periodicity
; resembling that of the desired sine value.
; The result lies in the range -1 to +1.
;
; 90 deg.
;
; (pi/2)
; II +1 I
; |
; sin+ |\ | /| sin+
; cos- | \ | / | cos+
; tan- | \ | / | tan+
; | \|/) |
; 180 deg. (pi) 0 -|----+----|-- 0 (0) 0 degrees
; | /|\ |
; sin- | / | \ | sin-
; cos- | / | \ | cos+
; tan+ |/ | \| tan-
; |
; III -1 IV
; (3pi/2)
;
; 270 deg.
;
;; get-argt
get_argt:
rst 0x28 ; ; FP-CALC X.
defb 0x3D ; ;re-stack (not rquired done by mult)
defb 0x34 ; ;stk-data
defb 0xEE ; ;Exponent: $7E,
; ;Bytes: 4
defb 0x22,0xF9,0x83,0x6E
; ; X, 1/(2*PI)
defb 0x04 ; ;multiply X/(2*PI) = fraction
defb 0x31 ; ;duplicate
defb 0xA2 ; ;stk-half
defb 0x0F ; ;addition
defb 0x27 ; ;int
defb 0x03 ; ;subtract now range -.5 to .5
defb 0x31 ; ;duplicate
defb 0x0F ; ;addition now range -1 to 1.
defb 0x31 ; ;duplicate
defb 0x0F ; ;addition now range -2 to +2.
; quadrant I (0 to +1) and quadrant IV (-1 to 0) are now correct.
; quadrant II ranges +1 to +2.
; quadrant III ranges -2 to -1.
defb 0x31 ; ;duplicate Y, Y.
defb 0x2A ; ;abs Y, abs(Y). range 1 to 2
defb 0xA1 ; ;stk-one Y, abs(Y), 1.
defb 0x03 ; ;subtract Y, abs(Y)-1. range 0 to 1
defb 0x31 ; ;duplicate Y, Z, Z.
defb 0x37 ; ;greater-0 Y, Z, (1/0).
defb 0xC0 ; ;st-mem-0 store as possible sign
; ; for cosine function.
defb 0x00 ; ;jump-true
defb 0x04 ; ;to L37A1, ZPLUS with quadrants II and III.
; else the angle lies in quadrant I or IV and value Y is already correct.
defb 0x02 ; ;delete Y. delete the test value.
defb 0x38 ; ;end-calc Y.
ret ; return. with Q1 and Q4 >>>
; ---
; the branch was here with quadrants II (0 to 1) and III (1 to 0).
; Y will hold -2 to -1 if this is quadrant III.
;; ZPLUS
ZPLUS:
defb 0xA1 ; ;stk-one Y, Z, 1.
defb 0x03 ; ;subtract Y, Z-1. Q3 = 0 to -1
defb 0x01 ; ;exchange Z-1, Y.
defb 0x36 ; ;less-0 Z-1, (1/0).
defb 0x00 ; ;jump-true Z-1.
defb 0x02 ; ;to L37A8, YNEG
; ;if angle in quadrant III
; else angle is within quadrant II (-1 to 0)
defb 0x1B ; ;negate range +1 to 0.
;; YNEG
YNEG:
defb 0x38 ; ;end-calc quadrants II and III correct.
ret ; return.
; ---------------------
; THE 'COSINE' FUNCTION
; ---------------------
; (offset $20: 'cos')
; Cosines are calculated as the sine of the opposite angle rectifying the
; sign depending on the quadrant rules.
;
;
; /|
; h /y|
; / |o
; /x |
; /----|
; a
;
; The cosine of angle x is the adjacent side (a) divided by the hypotenuse 1.
; However if we examine angle y then a/h is the sine of that angle.
; Since angle x plus angle y equals a right-angle, we can find angle y by
; subtracting angle x from pi/2.
; However it's just as easy to reduce the argument first and subtract the
; reduced argument from the value 1 (a reduced right-angle).
; It's even easier to subtract 1 from the angle and rectify the sign.
; In fact, after reducing the argument, the absolute value of the argument
; is used and rectified using the test result stored in mem-0 by 'get-argt'
; for that purpose.
;
;; cos
cos:
rst 0x28 ; ; FP-CALC angle in radians.
defb 0x39 ; ;get-argt X reduce -1 to +1
defb 0x2A ; ;abs ABS X. 0 to 1
defb 0xA1 ; ;stk-one ABS X, 1.
defb 0x03 ; ;subtract now opposite angle
; ; although sign is -ve.
defb 0xE0 ; ;get-mem-0 fetch the sign indicator
defb 0x00 ; ;jump-true
defb 0x06 ; ;fwd to L37B7, C-ENT
; ;forward to common code if in QII or QIII.
defb 0x1B ; ;negate else make sign +ve.
defb 0x33 ; ;jump
defb 0x03 ; ;fwd to L37B7, C-ENT
; ; with quadrants I and IV.
; -------------------
; THE 'SINE' FUNCTION
; -------------------
; (offset $1F: 'sin')
; This is a fundamental transcendental function from which others such as cos
; and tan are directly, or indirectly, derived.
; It uses the series generator to produce Chebyshev polynomials.
;
;
; /|
; 1 / |
; / |x
; /a |
; /----|
; y
;
; The 'get-argt' function is designed to modify the angle and its sign
; in line with the desired sine value and afterwards it can launch straight
; into common code.
;; sin
sin:
rst 0x28 ; ; FP-CALC angle in radians
defb 0x39 ; ;get-argt reduce - sign now correct.
;; C-ENT
C_ENT:
defb 0x31 ; ;duplicate
defb 0x31 ; ;duplicate
defb 0x04 ; ;multiply
defb 0x31 ; ;duplicate
defb 0x0F ; ;addition
defb 0xA1 ; ;stk-one
defb 0x03 ; ;subtract
defb 0x86 ; ;series-06
defb 0x14 ; ;Exponent: $64, Bytes: 1
defb 0xE6 ; ;(+00,+00,+00)
defb 0x5C ; ;Exponent: $6C, Bytes: 2
defb 0x1F,0x0B ; ;(+00,+00)
defb 0xA3 ; ;Exponent: $73, Bytes: 3
defb 0x8F,0x38,0xEE ; ;(+00)
defb 0xE9 ; ;Exponent: $79, Bytes: 4
defb 0x15,0x63,0xBB,0x23
; ;
defb 0xEE ; ;Exponent: $7E, Bytes: 4
defb 0x92,0x0D,0xCD,0xED
; ;
defb 0xF1 ; ;Exponent: $81, Bytes: 4
defb 0x23,0x5D,0x1B,0xEA
; ;
defb 0x04 ; ;multiply
defb 0x38 ; ;end-calc
ret ; return.
; ----------------------
; THE 'TANGENT' FUNCTION
; ----------------------
; (offset $21: 'tan')
;
; Evaluates tangent x as sin(x) / cos(x).
;
;
; /|
; h / |
; / |o
; /x |
; /----|
; a
;
; the tangent of angle x is the ratio of the length of the opposite side
; divided by the length of the adjacent side. As the opposite length can
; be calculates using sin(x) and the adjacent length using cos(x) then
; the tangent can be defined in terms of the previous two functions.
; Error 6 if the argument, in radians, is too close to one like pi/2
; which has an infinite tangent. e.g. PRINT TAN (PI/2) evaluates as 1/0.
; Similarly PRINT TAN (3*PI/2), TAN (5*PI/2) etc.
;; tan
tan:
rst 0x28 ; ; FP-CALC x.
defb 0x31 ; ;duplicate x, x.
defb 0x1F ; ;sin x, sin x.
defb 0x01 ; ;exchange sin x, x.
defb 0x20 ; ;cos sin x, cos x.
defb 0x05 ; ;division sin x/cos x (= tan x).
defb 0x38 ; ;end-calc tan x.
ret ; return.
; ---------------------
; THE 'ARCTAN' FUNCTION
; ---------------------
; (Offset $24: 'atn')
; the inverse tangent function with the result in radians.
; This is a fundamental transcendental function from which others such as asn
; and acs are directly, or indirectly, derived.
; It uses the series generator to produce Chebyshev polynomials.
;; atn
atn:
call re_stack ; routine re-stack
ld a,(hl) ; fetch exponent byte.
cp 0x81 ; compare to that for 'one'
jr c,SMALL ; forward, if less, to SMALL
rst 0x28 ; ; FP-CALC
defb 0xA1 ; ;stk-one
defb 0x1B ; ;negate
defb 0x01 ; ;exchange
defb 0x05 ; ;division
defb 0x31 ; ;duplicate
defb 0x36 ; ;less-0
defb 0xA3 ; ;stk-pi/2
defb 0x01 ; ;exchange
defb 0x00 ; ;jump-true
defb 0x06 ; ;to L37FA, CASES
defb 0x1B ; ;negate
defb 0x33 ; ;jump
defb 0x03 ; ;to L37FA, CASES
;; SMALL
SMALL:
rst 0x28 ; ; FP-CALC
defb 0xA0 ; ;stk-zero
;; CASES
CASES:
defb 0x01 ; ;exchange
defb 0x31 ; ;duplicate
defb 0x31 ; ;duplicate
defb 0x04 ; ;multiply
defb 0x31 ; ;duplicate
defb 0x0F ; ;addition
defb 0xA1 ; ;stk-one
defb 0x03 ; ;subtract
defb 0x8C ; ;series-0C
defb 0x10 ; ;Exponent: $60, Bytes: 1
defb 0xB2 ; ;(+00,+00,+00)
defb 0x13 ; ;Exponent: $63, Bytes: 1
defb 0x0E ; ;(+00,+00,+00)
defb 0x55 ; ;Exponent: $65, Bytes: 2
defb 0xE4,0x8D ; ;(+00,+00)
defb 0x58 ; ;Exponent: $68, Bytes: 2
defb 0x39,0xBC ; ;(+00,+00)
defb 0x5B ; ;Exponent: $6B, Bytes: 2
defb 0x98,0xFD ; ;(+00,+00)
defb 0x9E ; ;Exponent: $6E, Bytes: 3
defb 0x00,0x36,0x75 ; ;(+00)
defb 0xA0 ; ;Exponent: $70, Bytes: 3
defb 0xDB,0xE8,0xB4 ; ;(+00)
defb 0x63 ; ;Exponent: $73, Bytes: 2
defb 0x42,0xC4 ; ;(+00,+00)
defb 0xE6 ; ;Exponent: $76, Bytes: 4
defb 0xB5,0x09,0x36,0xBE
; ;
defb 0xE9 ; ;Exponent: $79, Bytes: 4
defb 0x36,0x73,0x1B,0x5D
; ;
defb 0xEC ; ;Exponent: $7C, Bytes: 4
defb 0xD8,0xDE,0x63,0xBE
; ;
defb 0xF0 ; ;Exponent: $80, Bytes: 4
defb 0x61,0xA1,0xB3,0x0C
; ;
defb 0x04 ; ;multiply
defb 0x0F ; ;addition
defb 0x38 ; ;end-calc
ret ; return.
; ---------------------
; THE 'ARCSIN' FUNCTION
; ---------------------
; (Offset $22: 'asn')
; The inverse sine function with result in radians.
; Derived from arctan function above.
; Error A unless the argument is between -1 and +1 inclusive.
; Uses an adaptation of the formula asn(x) = atn(x/sqr(1-x*x))
;
;
; /|
; / |
; 1/ |x
; /a |
; /----|
; y
;
; e.g. We know the opposite side (x) and hypotenuse (1)
; and we wish to find angle a in radians.
; We can derive length y by Pythagoras and then use ATN instead.
; Since y*y + x*x = 1*1 (Pythagoras Theorem) then
; y=sqr(1-x*x) - no need to multiply 1 by itself.
; So, asn(a) = atn(x/y)
; or more fully,
; asn(a) = atn(x/sqr(1-x*x))
; Close but no cigar.
; While PRINT ATN (x/SQR (1-x*x)) gives the same results as PRINT ASN x,
; it leads to division by zero when x is 1 or -1.
; To overcome this, 1 is added to y giving half the required angle and the
; result is then doubled.
; That is, PRINT ATN (x/(SQR (1-x*x) +1)) *2
;
; GEOMETRIC PROOF.
;
;
; . /|
; . c/ |
; . /1 |x
; . c b /a |
; ---------/----|
; 1 y
;
; By creating an isosceles triangle with two equal sides of 1, angles c and
; c are also equal. If b+c+c = 180 degrees and b+a = 180 degrees then c=a/2.
;
; A value higher than 1 gives the required error as attempting to find the
; square root of a negative number generates an error in Sinclair BASIC.
;; asn
asn:
rst 0x28 ; ; FP-CALC x.
defb 0x31 ; ;duplicate x, x.
defb 0x31 ; ;duplicate x, x, x.
defb 0x04 ; ;multiply x, x*x.
defb 0xA1 ; ;stk-one x, x*x, 1.
defb 0x03 ; ;subtract x, x*x-1.
defb 0x1B ; ;negate x, 1-x*x.
defb 0x28 ; ;sqr x, sqr(1-x*x) = y
defb 0xA1 ; ;stk-one x, y, 1.
defb 0x0F ; ;addition x, y+1.
defb 0x05 ; ;division x/y+1.
defb 0x24 ; ;atn a/2 (half the angle)
defb 0x31 ; ;duplicate a/2, a/2.
defb 0x0F ; ;addition a.
defb 0x38 ; ;end-calc a.
ret ; return.
; ---------------------
; THE 'ARCCOS' FUNCTION
; ---------------------
; (Offset $23: 'acs')
; the inverse cosine function with the result in radians.
; Error A unless the argument is between -1 and +1.
; Result in range 0 to pi.
; Derived from asn above which is in turn derived from the preceding atn.
; It could have been derived directly from atn using acs(x) = atn(sqr(1-x*x)/x).
; However, as sine and cosine are horizontal translations of each other,
; uses acs(x) = pi/2 - asn(x)
; e.g. the arccosine of a known x value will give the required angle b in
; radians.
; We know, from above, how to calculate the angle a using asn(x).
; Since the three angles of any triangle add up to 180 degrees, or pi radians,
; and the largest angle in this case is a right-angle (pi/2 radians), then
; we can calculate angle b as pi/2 (both angles) minus asn(x) (angle a).
;
;
; /|
; 1 /b|
; / |x
; /a |
; /----|
; y
;
;; acs
acs:
rst 0x28 ; ; FP-CALC x.
defb 0x22 ; ;asn asn(x).
defb 0xA3 ; ;stk-pi/2 asn(x), pi/2.
defb 0x03 ; ;subtract asn(x) - pi/2.
defb 0x1B ; ;negate pi/2 -asn(x) = acs(x).
defb 0x38 ; ;end-calc acs(x).
ret ; return.
; --------------------------
; THE 'SQUARE ROOT' FUNCTION
; --------------------------
; (Offset $28: 'sqr')
; This routine is remarkable for its brevity - 7 bytes.
; It wasn't written here but in the ZX81 where the programmers had to squeeze
; a bulky operating system into an 8K ROM. It simply calculates
; the square root by stacking the value .5 and continuing into the 'to-power'
; routine. With more space available the much faster Newton-Raphson method
; could have been used as on the Jupiter Ace.
;; sqr
sqr:
rst 0x28 ; ; FP-CALC
defb 0x31 ; ;duplicate
defb 0x30 ; ;not
defb 0x00 ; ;jump-true
defb 0x1E ; ;to L386C, LAST
defb 0xA2 ; ;stk-half
defb 0x38 ; ;end-calc
; ------------------------------
; THE 'EXPONENTIATION' OPERATION
; ------------------------------
; (Offset $06: 'to-power')
; This raises the first number X to the power of the second number Y.
; As with the ZX80,
; 0 ^ 0 = 1.
; 0 ^ +n = 0.
; 0 ^ -n = arithmetic overflow.
;
;; to-power
to_power:
rst 0x28 ; ; FP-CALC X, Y.
defb 0x01 ; ;exchange Y, X.
defb 0x31 ; ;duplicate Y, X, X.
defb 0x30 ; ;not Y, X, (1/0).
defb 0x00 ; ;jump-true
defb 0x07 ; ;to L385D, XIS0 if X is zero.
; else X is non-zero. Function 'ln' will catch a negative value of X.
defb 0x25 ; ;ln Y, LN X.
defb 0x04 ; ;multiply Y * LN X.
defb 0x38 ; ;end-calc
jp exp ; jump back to EXP routine ->
; ---
; these routines form the three simple results when the number is zero.
; begin by deleting the known zero to leave Y the power factor.
;; XIS0
XIS0:
defb 0x02 ; ;delete Y.
defb 0x31 ; ;duplicate Y, Y.
defb 0x30 ; ;not Y, (1/0).
defb 0x00 ; ;jump-true
defb 0x09 ; ;to L386A, ONE if Y is zero.
defb 0xA0 ; ;stk-zero Y, 0.
defb 0x01 ; ;exchange 0, Y.
defb 0x37 ; ;greater-0 0, (1/0).
defb 0x00 ; ;jump-true 0.
defb 0x06 ; ;to L386C, LAST if Y was any positive
; ; number.
; else force division by zero thereby raising an Arithmetic overflow error.
; There are some one and two-byte alternatives but perhaps the most formal
; might have been to use end-calc; rst 08; defb 05.
defb 0xA1 ; ;stk-one 0, 1.
defb 0x01 ; ;exchange 1, 0.
defb 0x05 ; ;division 1/0 ouch!
; ---
;; ONE
ONE:
defb 0x02 ; ;delete .
defb 0xA1 ; ;stk-one 1.
;; LAST
LAST:
defb 0x38 ; ;end-calc last value is 1 or 0.
ret ; return.
; "Everything should be made as simple as possible, but not simpler"
; - Albert Einstein, 1879-1955.
; ---------------------
; THE 'SPARE' LOCATIONS
; ---------------------
;; spare
spare:
defb 0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
defb 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
; -------------------------------
; THE 'ZX SPECTRUM CHARACTER SET'
; -------------------------------
;; char-set
; $20 - Character: ' ' CHR$(32)
char_set:
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
; $21 - Character: '!' CHR$(33)
defb 0b00000000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00000000
defb 0b00010000
defb 0b00000000
; $22 - Character: '"' CHR$(34)
defb 0b00000000
defb 0b00100100
defb 0b00100100
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
; $23 - Character: '#' CHR$(35)
defb 0b00000000
defb 0b00100100
defb 0b01111110
defb 0b00100100
defb 0b00100100
defb 0b01111110
defb 0b00100100
defb 0b00000000
; $24 - Character: '$' CHR$(36)
defb 0b00000000
defb 0b00001000
defb 0b00111110
defb 0b00101000
defb 0b00111110
defb 0b00001010
defb 0b00111110
defb 0b00001000
; $25 - Character: '%' CHR$(37)
defb 0b00000000
defb 0b01100010
defb 0b01100100
defb 0b00001000
defb 0b00010000
defb 0b00100110
defb 0b01000110
defb 0b00000000
; $26 - Character: '&' CHR$(38)
defb 0b00000000
defb 0b00010000
defb 0b00101000
defb 0b00010000
defb 0b00101010
defb 0b01000100
defb 0b00111010
defb 0b00000000
; $27 - Character: ''' CHR$(39)
defb 0b00000000
defb 0b00001000
defb 0b00010000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
; $28 - Character: '(' CHR$(40)
defb 0b00000000
defb 0b00000100
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00000100
defb 0b00000000
; $29 - Character: ')' CHR$(41)
defb 0b00000000
defb 0b00100000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00100000
defb 0b00000000
; $2A - Character: '*' CHR$(42)
defb 0b00000000
defb 0b00000000
defb 0b00010100
defb 0b00001000
defb 0b00111110
defb 0b00001000
defb 0b00010100
defb 0b00000000
; $2B - Character: '+' CHR$(43)
defb 0b00000000
defb 0b00000000
defb 0b00001000
defb 0b00001000
defb 0b00111110
defb 0b00001000
defb 0b00001000
defb 0b00000000
; $2C - Character: ',' CHR$(44)
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00001000
defb 0b00001000
defb 0b00010000
; $2D - Character: '-' CHR$(45)
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00111110
defb 0b00000000
defb 0b00000000
defb 0b00000000
; $2E - Character: '.' CHR$(46)
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00011000
defb 0b00011000
defb 0b00000000
; $2F - Character: '/' CHR$(47)
defb 0b00000000
defb 0b00000000
defb 0b00000010
defb 0b00000100
defb 0b00001000
defb 0b00010000
defb 0b00100000
defb 0b00000000
; $30 - Character: '0' CHR$(48)
defb 0b00000000
defb 0b00111100
defb 0b01000110
defb 0b01001010
defb 0b01010010
defb 0b01100010
defb 0b00111100
defb 0b00000000
; $31 - Character: '1' CHR$(49)
defb 0b00000000
defb 0b00011000
defb 0b00101000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00111110
defb 0b00000000
; $32 - Character: '2' CHR$(50)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b00000010
defb 0b00111100
defb 0b01000000
defb 0b01111110
defb 0b00000000
; $33 - Character: '3' CHR$(51)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b00001100
defb 0b00000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $34 - Character: '4' CHR$(52)
defb 0b00000000
defb 0b00001000
defb 0b00011000
defb 0b00101000
defb 0b01001000
defb 0b01111110
defb 0b00001000
defb 0b00000000
; $35 - Character: '5' CHR$(53)
defb 0b00000000
defb 0b01111110
defb 0b01000000
defb 0b01111100
defb 0b00000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $36 - Character: '6' CHR$(54)
defb 0b00000000
defb 0b00111100
defb 0b01000000
defb 0b01111100
defb 0b01000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $37 - Character: '7' CHR$(55)
defb 0b00000000
defb 0b01111110
defb 0b00000010
defb 0b00000100
defb 0b00001000
defb 0b00010000
defb 0b00010000
defb 0b00000000
; $38 - Character: '8' CHR$(56)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b00111100
defb 0b01000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $39 - Character: '9' CHR$(57)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b01000010
defb 0b00111110
defb 0b00000010
defb 0b00111100
defb 0b00000000
; $3A - Character: ':' CHR$(58)
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00010000
defb 0b00000000
defb 0b00000000
defb 0b00010000
defb 0b00000000
; $3B - Character: ';' CHR$(59)
defb 0b00000000
defb 0b00000000
defb 0b00010000
defb 0b00000000
defb 0b00000000
defb 0b00010000
defb 0b00010000
defb 0b00100000
; $3C - Character: '<' CHR$(60)
defb 0b00000000
defb 0b00000000
defb 0b00000100
defb 0b00001000
defb 0b00010000
defb 0b00001000
defb 0b00000100
defb 0b00000000
; $3D - Character: '=' CHR$(61)
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00111110
defb 0b00000000
defb 0b00111110
defb 0b00000000
defb 0b00000000
; $3E - Character: '>' CHR$(62)
defb 0b00000000
defb 0b00000000
defb 0b00010000
defb 0b00001000
defb 0b00000100
defb 0b00001000
defb 0b00010000
defb 0b00000000
; $3F - Character: '?' CHR$(63)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b00000100
defb 0b00001000
defb 0b00000000
defb 0b00001000
defb 0b00000000
; $40 - Character: '@' CHR$(64)
defb 0b00000000
defb 0b00111100
defb 0b01001010
defb 0b01010110
defb 0b01011110
defb 0b01000000
defb 0b00111100
defb 0b00000000
; $41 - Character: 'A' CHR$(65)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b01000010
defb 0b01111110
defb 0b01000010
defb 0b01000010
defb 0b00000000
; $42 - Character: 'B' CHR$(66)
defb 0b00000000
defb 0b01111100
defb 0b01000010
defb 0b01111100
defb 0b01000010
defb 0b01000010
defb 0b01111100
defb 0b00000000
; $43 - Character: 'C' CHR$(67)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b01000000
defb 0b01000000
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $44 - Character: 'D' CHR$(68)
defb 0b00000000
defb 0b01111000
defb 0b01000100
defb 0b01000010
defb 0b01000010
defb 0b01000100
defb 0b01111000
defb 0b00000000
; $45 - Character: 'E' CHR$(69)
defb 0b00000000
defb 0b01111110
defb 0b01000000
defb 0b01111100
defb 0b01000000
defb 0b01000000
defb 0b01111110
defb 0b00000000
; $46 - Character: 'F' CHR$(70)
defb 0b00000000
defb 0b01111110
defb 0b01000000
defb 0b01111100
defb 0b01000000
defb 0b01000000
defb 0b01000000
defb 0b00000000
; $47 - Character: 'G' CHR$(71)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b01000000
defb 0b01001110
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $48 - Character: 'H' CHR$(72)
defb 0b00000000
defb 0b01000010
defb 0b01000010
defb 0b01111110
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b00000000
; $49 - Character: 'I' CHR$(73)
defb 0b00000000
defb 0b00111110
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00111110
defb 0b00000000
; $4A - Character: 'J' CHR$(74)
defb 0b00000000
defb 0b00000010
defb 0b00000010
defb 0b00000010
defb 0b01000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $4B - Character: 'K' CHR$(75)
defb 0b00000000
defb 0b01000100
defb 0b01001000
defb 0b01110000
defb 0b01001000
defb 0b01000100
defb 0b01000010
defb 0b00000000
; $4C - Character: 'L' CHR$(76)
defb 0b00000000
defb 0b01000000
defb 0b01000000
defb 0b01000000
defb 0b01000000
defb 0b01000000
defb 0b01111110
defb 0b00000000
; $4D - Character: 'M' CHR$(77)
defb 0b00000000
defb 0b01000010
defb 0b01100110
defb 0b01011010
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b00000000
; $4E - Character: 'N' CHR$(78)
defb 0b00000000
defb 0b01000010
defb 0b01100010
defb 0b01010010
defb 0b01001010
defb 0b01000110
defb 0b01000010
defb 0b00000000
; $4F - Character: 'O' CHR$(79)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $50 - Character: 'P' CHR$(80)
defb 0b00000000
defb 0b01111100
defb 0b01000010
defb 0b01000010
defb 0b01111100
defb 0b01000000
defb 0b01000000
defb 0b00000000
; $51 - Character: 'Q' CHR$(81)
defb 0b00000000
defb 0b00111100
defb 0b01000010
defb 0b01000010
defb 0b01010010
defb 0b01001010
defb 0b00111100
defb 0b00000000
; $52 - Character: 'R' CHR$(82)
defb 0b00000000
defb 0b01111100
defb 0b01000010
defb 0b01000010
defb 0b01111100
defb 0b01000100
defb 0b01000010
defb 0b00000000
; $53 - Character: 'S' CHR$(83)
defb 0b00000000
defb 0b00111100
defb 0b01000000
defb 0b00111100
defb 0b00000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $54 - Character: 'T' CHR$(84)
defb 0b00000000
defb 0b11111110
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00000000
; $55 - Character: 'U' CHR$(85)
defb 0b00000000
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b00111100
defb 0b00000000
; $56 - Character: 'V' CHR$(86)
defb 0b00000000
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b00100100
defb 0b00011000
defb 0b00000000
; $57 - Character: 'W' CHR$(87)
defb 0b00000000
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b01000010
defb 0b01011010
defb 0b00100100
defb 0b00000000
; $58 - Character: 'X' CHR$(88)
defb 0b00000000
defb 0b01000010
defb 0b00100100
defb 0b00011000
defb 0b00011000
defb 0b00100100
defb 0b01000010
defb 0b00000000
; $59 - Character: 'Y' CHR$(89)
defb 0b00000000
defb 0b10000010
defb 0b01000100
defb 0b00101000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00000000
; $5A - Character: 'Z' CHR$(90)
defb 0b00000000
defb 0b01111110
defb 0b00000100
defb 0b00001000
defb 0b00010000
defb 0b00100000
defb 0b01111110
defb 0b00000000
; $5B - Character: '[' CHR$(91)
defb 0b00000000
defb 0b00001110
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00001110
defb 0b00000000
; $5C - Character: '\' CHR$(92)
defb 0b00000000
defb 0b00000000
defb 0b01000000
defb 0b00100000
defb 0b00010000
defb 0b00001000
defb 0b00000100
defb 0b00000000
; $5D - Character: ']' CHR$(93)
defb 0b00000000
defb 0b01110000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b01110000
defb 0b00000000
; $5E - Character: '^' CHR$(94)
defb 0b00000000
defb 0b00010000
defb 0b00111000
defb 0b01010100
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00000000
; $5F - Character: '_' CHR$(95)
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b11111111
; $60 - Character: ' £ ' CHR$(96)
defb 0b00000000
defb 0b00011100
defb 0b00100010
defb 0b01111000
defb 0b00100000
defb 0b00100000
defb 0b01111110
defb 0b00000000
; $61 - Character: 'a' CHR$(97)
defb 0b00000000
defb 0b00000000
defb 0b00111000
defb 0b00000100
defb 0b00111100
defb 0b01000100
defb 0b00111100
defb 0b00000000
; $62 - Character: 'b' CHR$(98)
defb 0b00000000
defb 0b00100000
defb 0b00100000
defb 0b00111100
defb 0b00100010
defb 0b00100010
defb 0b00111100
defb 0b00000000
; $63 - Character: 'c' CHR$(99)
defb 0b00000000
defb 0b00000000
defb 0b00011100
defb 0b00100000
defb 0b00100000
defb 0b00100000
defb 0b00011100
defb 0b00000000
; $64 - Character: 'd' CHR$(100)
defb 0b00000000
defb 0b00000100
defb 0b00000100
defb 0b00111100
defb 0b01000100
defb 0b01000100
defb 0b00111100
defb 0b00000000
; $65 - Character: 'e' CHR$(101)
defb 0b00000000
defb 0b00000000
defb 0b00111000
defb 0b01000100
defb 0b01111000
defb 0b01000000
defb 0b00111100
defb 0b00000000
; $66 - Character: 'f' CHR$(102)
defb 0b00000000
defb 0b00001100
defb 0b00010000
defb 0b00011000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00000000
; $67 - Character: 'g' CHR$(103)
defb 0b00000000
defb 0b00000000
defb 0b00111100
defb 0b01000100
defb 0b01000100
defb 0b00111100
defb 0b00000100
defb 0b00111000
; $68 - Character: 'h' CHR$(104)
defb 0b00000000
defb 0b01000000
defb 0b01000000
defb 0b01111000
defb 0b01000100
defb 0b01000100
defb 0b01000100
defb 0b00000000
; $69 - Character: 'i' CHR$(105)
defb 0b00000000
defb 0b00010000
defb 0b00000000
defb 0b00110000
defb 0b00010000
defb 0b00010000
defb 0b00111000
defb 0b00000000
; $6A - Character: 'j' CHR$(106)
defb 0b00000000
defb 0b00000100
defb 0b00000000
defb 0b00000100
defb 0b00000100
defb 0b00000100
defb 0b00100100
defb 0b00011000
; $6B - Character: 'k' CHR$(107)
defb 0b00000000
defb 0b00100000
defb 0b00101000
defb 0b00110000
defb 0b00110000
defb 0b00101000
defb 0b00100100
defb 0b00000000
; $6C - Character: 'l' CHR$(108)
defb 0b00000000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00001100
defb 0b00000000
; $6D - Character: 'm' CHR$(109)
defb 0b00000000
defb 0b00000000
defb 0b01101000
defb 0b01010100
defb 0b01010100
defb 0b01010100
defb 0b01010100
defb 0b00000000
; $6E - Character: 'n' CHR$(110)
defb 0b00000000
defb 0b00000000
defb 0b01111000
defb 0b01000100
defb 0b01000100
defb 0b01000100
defb 0b01000100
defb 0b00000000
; $6F - Character: 'o' CHR$(111)
defb 0b00000000
defb 0b00000000
defb 0b00111000
defb 0b01000100
defb 0b01000100
defb 0b01000100
defb 0b00111000
defb 0b00000000
; $70 - Character: 'p' CHR$(112)
defb 0b00000000
defb 0b00000000
defb 0b01111000
defb 0b01000100
defb 0b01000100
defb 0b01111000
defb 0b01000000
defb 0b01000000
; $71 - Character: 'q' CHR$(113)
defb 0b00000000
defb 0b00000000
defb 0b00111100
defb 0b01000100
defb 0b01000100
defb 0b00111100
defb 0b00000100
defb 0b00000110
; $72 - Character: 'r' CHR$(114)
defb 0b00000000
defb 0b00000000
defb 0b00011100
defb 0b00100000
defb 0b00100000
defb 0b00100000
defb 0b00100000
defb 0b00000000
; $73 - Character: 's' CHR$(115)
defb 0b00000000
defb 0b00000000
defb 0b00111000
defb 0b01000000
defb 0b00111000
defb 0b00000100
defb 0b01111000
defb 0b00000000
; $74 - Character: 't' CHR$(116)
defb 0b00000000
defb 0b00010000
defb 0b00111000
defb 0b00010000
defb 0b00010000
defb 0b00010000
defb 0b00001100
defb 0b00000000
; $75 - Character: 'u' CHR$(117)
defb 0b00000000
defb 0b00000000
defb 0b01000100
defb 0b01000100
defb 0b01000100
defb 0b01000100
defb 0b00111000
defb 0b00000000
; $76 - Character: 'v' CHR$(118)
defb 0b00000000
defb 0b00000000
defb 0b01000100
defb 0b01000100
defb 0b00101000
defb 0b00101000
defb 0b00010000
defb 0b00000000
; $77 - Character: 'w' CHR$(119)
defb 0b00000000
defb 0b00000000
defb 0b01000100
defb 0b01010100
defb 0b01010100
defb 0b01010100
defb 0b00101000
defb 0b00000000
; $78 - Character: 'x' CHR$(120)
defb 0b00000000
defb 0b00000000
defb 0b01000100
defb 0b00101000
defb 0b00010000
defb 0b00101000
defb 0b01000100
defb 0b00000000
; $79 - Character: 'y' CHR$(121)
defb 0b00000000
defb 0b00000000
defb 0b01000100
defb 0b01000100
defb 0b01000100
defb 0b00111100
defb 0b00000100
defb 0b00111000
; $7A - Character: 'z' CHR$(122)
defb 0b00000000
defb 0b00000000
defb 0b01111100
defb 0b00001000
defb 0b00010000
defb 0b00100000
defb 0b01111100
defb 0b00000000
; $7B - Character: '{' CHR$(123)
defb 0b00000000
defb 0b00001110
defb 0b00001000
defb 0b00110000
defb 0b00001000
defb 0b00001000
defb 0b00001110
defb 0b00000000
; $7C - Character: '|' CHR$(124)
defb 0b00000000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00001000
defb 0b00000000
; $7D - Character: '}' CHR$(125)
defb 0b00000000
defb 0b01110000
defb 0b00010000
defb 0b00001100
defb 0b00010000
defb 0b00010000
defb 0b01110000
defb 0b00000000
; $7E - Character: '~' CHR$(126)
defb 0b00000000
defb 0b00010100
defb 0b00101000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
defb 0b00000000
; $7F - Character: ' © ' CHR$(127)
defb 0b00111100
defb 0b01000010
defb 0b10011001
defb 0b10100001
defb 0b10100001
defb 0b10011001
defb 0b01000010
defb 0b00111100
;#end ; generic cross-assembler directive
; Acknowledgements
; -----------------
; Sean Irvine for default list of section headings
; Dr. Ian Logan for labels and functional disassembly.
; Dr. Frank O'Hara for labels and functional disassembly.
;
; Credits
; -------
; Alex Pallero Gonzales for corrections.
; Mike Dailly for comments.
; Alvin Albrecht for comments.
; Andy Styles for full relocatability implementation and testing. testing.
; Andrew Owen for ZASM compatibility and format improvements.
; For other assemblers you may have to add directives like these near the
; beginning - see accompanying documentation.
; ZASM (MacOs) cross-assembler directives. (uncomment by removing ';' )
; #target rom ; declare target file format as binary.
; #code 0,$4000 ; declare code segment.
; Also see notes at Address Labels 0609 and 1CA5 if your assembler has
; trouble with expressions.
;
; Note. The Sinclair Interface 1 ROM written by Dr. Ian Logan and Martin
; Brennan calls numerous routines in this ROM.
; Non-standard entry points have a label beginning with X.
; 0x0000 CCCCCCCCCCCCCCCCCCCBBBBBCCCCCCCCCCCCCBBBCCCBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0050 CCCCCCCCCCCCCCCBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBB
; 0x00A0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x00F0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x0140 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x0190 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x01E0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x0230 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x0280 BBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x02D0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0320 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0370 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x03C0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBCCCCCCCCC
; 0x0410 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBCCCCBBBBCCCCCCCCBBBBBBBBBBBBBBBBCCCCC
; 0x0460 CCCCCCCCCCCCCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCCCCCC
; 0x04B0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0500 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0550 CCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x05A0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x05F0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0640 CCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0690 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x06E0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0730 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0780 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x07D0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0820 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0870 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x08C0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0910 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0960 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBB
; 0x09B0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCCCCCCCCCCCC
; 0x0A00 CCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0A50 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0AA0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0AF0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0B40 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0B90 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0BE0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0C30 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0C80 CCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0CD0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0D20 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0D70 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0DC0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0E10 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0E60 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0EB0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0F00 CCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0F50 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0FA0 BBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x0FF0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1040 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1090 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x10E0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1130 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1180 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x11D0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1220 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1270 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x12C0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1310 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1360 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x13B0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x1400 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x1450 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x14A0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x14F0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x1540 BBBBBBBBBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1590 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCWWWWBWWWWBWWWWBWWWWBBCBBBBBBBBBBBBBBBCCCCCCCCCCCC
; 0x15E0 CCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBB
; 0x1630 BBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1680 CCCCCCCCCCCCCCCBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x16D0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBCCCC
; 0x1720 CCCCCCBCCCCCCCCCCCCCCCCBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCC
; 0x1770 CCCCCCCCCCBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x17C0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1810 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1860 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x18B0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1900 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1950 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x19A0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x19F0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1A40 CCCCCCCCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBWWBBBWWBBWWBWWBWW
; 0x1A90 BBBBBBWWBBWWBWWBWWBWWBWWBWWBWWBWWBBWWBWWBWWBWWBWWBBWWBBWWBWWBWWBWWBBWWBWWBWWBWWB
; 0x1AE0 BBBBBWWBBWWBBBBBBBBWWBBWWBWWBBBBWWBBWWBBWWBBBBWWBBWWBWWCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1B30 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCC
; 0x1B80 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1BD0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCC
; 0x1C20 CCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1C70 CCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1CC0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBCCBCCCCCCCBBCCCCCCCCCCCCCCCCCCCCCCC
; 0x1D10 CCCCBBCBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1D60 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1DB0 CCCCCCCCCCCCCCBBBBBBCCCCCCCCCCCCCCCCCCCCCBCBBBBBBBBBBBBCCBCCCCCCCCCCCCCCCCCCCCCC
; 0x1E00 CCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1E50 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1EA0 BCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCC
; 0x1EF0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCC
; 0x1F40 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1F90 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x1FE0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2030 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2080 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x20D0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2120 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2170 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x21C0 CCCCCCCCCCCCCCCBCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2210 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2260 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x22B0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2300 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBCCCCCCBBCCCBBCCCBBBCCCCCBBBBCCC
; 0x2350 CCCBBBCCCCCBBBBBBBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBB
; 0x23A0 CCCBBBBBBBBBBBBBBBBBBCCCCCCBBBCCCCCCCCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x23F0 BBBBBBBBBBBBBCCCCCCCCCBBCCCCCCCBBBBCCCCCCCBBBBBCCCCCCCBBBBBBBBBBBBBBBBBBBCCBBBBB
; 0x2440 BCCCCCCCBBBBBBBBCCCCCCCBBCCCCCCCBBBBCCCCCCCBBBCCCCCCCBBCCCCCCCBBBBBBBBBBBBCCCCCC
; 0x2490 CCCCCCCCCCCCBBBBBBBBBBBBBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x24E0 CCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2530 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2580 CCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x25D0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBBBBBCCCCCCCCC
; 0x2620 CCCCCCCCCCCCCBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2670 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x26C0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2710 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBCCCCCCC
; 0x2760 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x27B0 BBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2800 CCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2850 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCC
; 0x28A0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x28F0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2940 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2990 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x29E0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCC
; 0x2A30 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2A80 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2AD0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2B20 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBCCCCCCCCCCCCCCCCCCC
; 0x2B70 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2BC0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2C10 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2C60 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2CB0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBCBBBBCCCCCCCBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2D00 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCBBCCCCCCBBBBBCCCCCC
; 0x2D50 CCCCCCCCCCCCCBBCCCCCCCBBBBBBBBBBCCCCCBBBCCCCBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2DA0 CCCBCCCCCBBBBCBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBCCCCCCCCCCCCCCCBBBBBBBBBBCC
; 0x2DF0 CCBBCCCCBBBBBBCCCCBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCBBCCCCCCCCCCCCCCCCCCCBBBBBB
; 0x2E40 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2E90 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBCCCCCCCCCCCCCCCCC
; 0x2EE0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2F30 CBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2F80 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x2FD0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3020 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3070 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x30C0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3110 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3160 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBC
; 0x31B0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3200 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3250 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x32A0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBBBBBBWWWWWWWWWWWWWWWWWWWWWWWWW
; 0x32F0 WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW
; 0x3340 WWWWWWWWWWWWWWWWWWWWWWWWWWWCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3390 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x33E0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3430 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBCCCCCCBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCC
; 0x3480 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x34D0 CCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3520 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3570 CCCCCCCCCCCCCCCCCCCCCCCCCCBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x35C0 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCBCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3610 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
; 0x3660 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCBBBBBBBBBBBBBCC
; 0x36B0 BBBBBBCBBBBBBBBBBBBCCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCCCCCCC
; 0x3700 CCCCBCCCCCCCCCCBBBCCBBBBBBCBBBBCCCCCCCBBBBBBBBBBBBBBBBBBBBBCCBBBBBBBBBBBBBBBBBBB
; 0x3750 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCCBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x37A0 CBBBBBBBBCCBBBBBBBBBBCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCCBBBBBBCCCCCCCCCCBBBBB
; 0x37F0 BBBBBBBBCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCCBBBBBBBBBBBB
; 0x3840 BBCCBBBBBCCBBBBBBCBBBBBBBBCCCBBBBBBBBBBBBBBBBCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3890 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x38E0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3930 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3980 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x39D0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3A20 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3A70 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3AC0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3B10 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3B60 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3BB0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3C00 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3C50 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3CA0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3CF0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3D40 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3D90 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3DE0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3E30 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3E80 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3ED0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3F20 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3F70 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; 0x3FC0 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
; Labels
;
; 0x0000 => START abs => 0x346A
; 0x0008 => ERROR_1 acs => 0x3843
; 0x0010 => PRINT_A ADD_BACK => 0x3004
; 0x0018 => GET_CHAR ADD_CH_1 => 0x0F8B
; 0x001C => TEST_CHAR ADD_CHAR => 0x0F81
; 0x0020 => NEXT_CHAR ADD_REP_6 => 0x309F
; 0x0028 => FP_CALC ADDEND_0 => 0x2FF9
; 0x0030 => BC_SPACES addition => 0x3014
; 0x0038 => MASK_INT ADDN_OFLW => 0x303C
; 0x0048 => KEY_INT ALL_ADDED => 0x300D
; 0x0053 => ERROR_2 ALPHA => 0x2C8D
; 0x0055 => ERROR_3 ALPHANUM => 0x2C88
; 0x0066 => RESET ARC_END => 0x245F
; 0x0070 => NO_RESET ARC_LOOP => 0x2425
; 0x0074 => CH_ADD_1 ARC_START => 0x2439
; 0x0077 => TEMP_PTR1 asn => 0x3833
; 0x0078 => TEMP_PTR2 atn => 0x37E2
; 0x007B => X007B ATTR_P => 0x5C8D
; 0x007D => SKIP_OVER ATTR_T => 0x5C8F
; 0x0090 => SKIPS AUTO_L_1 => 0x17CE
; 0x0095 => TKN_TABLE AUTO_L_2 => 0x17E1
; 0x0205 => MAIN_KEYS AUTO_L_3 => 0x17E4
; 0x022C => E_UNSHIFT AUTO_L_4 => 0x17ED
; 0x0246 => EXT_SHIFT AUTO_LIST => 0x1795
; 0x0260 => CTL_CODES BC_SPACES => 0x0030
; 0x026A => SYM_CODES BE_AGAIN => 0x03F2
; 0x0284 => E_DIGITS BE_END => 0x03F6
; 0x028E => KEY_SCAN BE_H_L_LP => 0x03D6
; 0x0296 => KEY_LINE BE_I_OK => 0x0425
; 0x029F => KEY_3KEYS BE_IX_0 => 0x03D4
; 0x02A1 => KEY_BITS BE_IX_1 => 0x03D3
; 0x02AB => KEY_DONE BE_IX_2 => 0x03D2
; 0x02BF => KEYBOARD BE_IX_3 => 0x03D1
; 0x02C6 => K_ST_LOOP BE_OCTAVE => 0x0427
; 0x02D1 => K_CH_SET beep => 0x03F8
; 0x02F1 => K_NEW BEEPER => 0x03B5
; 0x0308 => K_END BIN_DIGIT => 0x2CA2
; 0x0310 => K_REPEAT BIN_END => 0x2CB3
; 0x031E => K_TEST BITS_ZERO => 0x3283
; 0x032C => K_MAIN BORDCR => 0x5C48
; 0x0333 => K_DECODE BORDER => 0x2294
; 0x0341 => K_E_LET BORDER_1 => 0x22A6
; 0x034A => K_LOOK_UP BOTH_NULL => 0x3572
; 0x034F => K_KLC_LET BREAK_KEY => 0x1F54
; 0x0364 => K_TOKENS BREG => 0x5C67
; 0x0367 => K_DIGIT BYTE_COMP => 0x3564
; 0x0382 => K_8___9 BYTE_ZERO => 0x327E
; 0x0389 => K_GRA_DGT C_ARC_GE1 => 0x235A
; 0x039D => K_KLC_DGT C_ENT => 0x37B7
; 0x03B2 => K___CHAR C_R_GRE_1 => 0x233B
; 0x03B5 => BEEPER CA_10_A_C => 0x2F8B
; 0x03D1 => BE_IX_3 CALCULATE => 0x335B
; 0x03D2 => BE_IX_2 CALL_JUMP => 0x162C
; 0x03D3 => BE_IX_1 CALL_SUB => 0x15F7
; 0x03D4 => BE_IX_0 CASES => 0x37FA
; 0x03D6 => BE_H_L_LP CAT_ETC => 0x1793
; 0x03F2 => BE_AGAIN CD_PRMS1 => 0x247D
; 0x03F6 => BE_END CH_ADD => 0x5C5D
; 0x03F8 => beep CH_ADD_1 => 0x0074
; 0x0425 => BE_I_OK CHAN_FLAG => 0x1615
; 0x0427 => BE_OCTAVE CHAN_K => 0x1634
; 0x046C => REPORT_B CHAN_OP_1 => 0x1610
; 0x046E => semi_tone CHAN_OPEN => 0x1601
; 0x04AA => zx81_name CHAN_P => 0x164D
; 0x04C2 => SA_BYTES CHAN_S => 0x1642
; 0x04D0 => SA_FLAG CHAN_S_1 => 0x1646
; 0x04D8 => SA_LEADER CHANS => 0x5C4F
; 0x04EA => SA_SYNC_1 char_set => 0x3D00
; 0x04F2 => SA_SYNC_2 CHARS => 0x5C36
; 0x04FE => SA_LOOP CHECK_END => 0x1BEE
; 0x0505 => SA_LOOP_P chn_cd_lu => 0x162D
; 0x0507 => SA_START chrs => 0x35C9
; 0x050E => SA_PARITY CIRCLE => 0x2320
; 0x0511 => SA_BIT_2 CL_09_1 => 0x1CD6
; 0x0514 => SA_BIT_1 CL_ADDR => 0x0E9B
; 0x051A => SA_SET CL_ALL => 0x0DAF
; 0x051C => SA_OUT CL_ATTR => 0x0E88
; 0x0525 => SA_8_BITS CL_CHAN => 0x0D94
; 0x053C => SA_DELAY CL_CHAN_A => 0x0DA0
; 0x053F => SA_LD_RET CL_LINE => 0x0E44
; 0x0552 => REPORT_Da CL_LINE_1 => 0x0E4A
; 0x0554 => SA_LD_END CL_LINE_2 => 0x0E4D
; 0x0556 => LD_BYTES CL_LINE_3 => 0x0E80
; 0x056B => LD_BREAK CL_SC_ALL => 0x0DFE
; 0x056C => LD_START CL_SCR_1 => 0x0E05
; 0x0574 => LD_WAIT CL_SCR_2 => 0x0E0D
; 0x0580 => LD_LEADER CL_SCR_3 => 0x0E19
; 0x058F => LD_SYNC CL_SCROLL => 0x0E00
; 0x05A9 => LD_LOOP CL_SET => 0x0DD9
; 0x05B3 => LD_FLAG CL_SET_1 => 0x0DEE
; 0x05BD => LD_VERIFY CL_SET_2 => 0x0DF4
; 0x05C2 => LD_NEXT cl_str_lu => 0x1716
; 0x05C4 => LD_DEC CLASS_00 => 0x1C10
; 0x05C8 => LD_MARKER CLASS_01 => 0x1C1F
; 0x05CA => LD_8_BITS CLASS_02 => 0x1C4E
; 0x05E3 => LD_EDGE_2 CLASS_03 => 0x1C0D
; 0x05E7 => LD_EDGE_1 CLASS_04 => 0x1C6C
; 0x05E9 => LD_DELAY CLASS_05 => 0x1C11
; 0x05ED => LD_SAMPLE CLASS_07 => 0x1C96
; 0x0605 => SAVE_ETC CLASS_09 => 0x1CBE
; 0x0609 => L0609 CLASS_0B => 0x1CDB
; 0x0621 => SA_SPACE class_tbl => 0x1C01
; 0x0629 => SA_BLANK CLEAR => 0x1EAC
; 0x0642 => REPORT_Fa CLEAR_1 => 0x1EB7
; 0x0644 => SA_NULL CLEAR_2 => 0x1EDC
; 0x064B => SA_NAME CLEAR_PRB => 0x0EDF
; 0x0652 => SA_DATA CLEAR_RUN => 0x1EAF
; 0x0670 => REPORT_2a CLEAR_SP => 0x1097
; 0x0672 => SA_V_OLD CLOSE => 0x16E5
; 0x0685 => SA_V_NEW CLOSE_1 => 0x16FC
; 0x068F => SA_V_TYPE CLOSE_2 => 0x1701
; 0x0692 => SA_DATA_1 CLOSE_STR => 0x171C
; 0x06A0 => SA_SCR_ CLS => 0x0D6B
; 0x06C3 => SA_CODE CLS_1 => 0x0D87
; 0x06E1 => SA_CODE_1 CLS_2 => 0x0D89
; 0x06F0 => SA_CODE_2 CLS_3 => 0x0D8E
; 0x06F5 => SA_CODE_3 CLS_LOWER => 0x0D6E
; 0x06F9 => SA_CODE_4 CO_CHANGE => 0x226C
; 0x0710 => SA_TYPE_3 CO_TEMP_1 => 0x21E1
; 0x0716 => SA_LINE CO_TEMP_2 => 0x21E2
; 0x0723 => SA_LINE_1 CO_TEMP_3 => 0x21F2
; 0x073A => SA_TYPE_0 CO_TEMP_4 => 0x21FC
; 0x075A => SA_ALL CO_TEMP_5 => 0x2211
; 0x0767 => LD_LOOK_H CO_TEMP_6 => 0x2228
; 0x078A => LD_TYPE CO_TEMP_7 => 0x2234
; 0x07A6 => LD_NAME CO_TEMP_8 => 0x223E
; 0x07AD => LD_CH_PR CO_TEMP_9 => 0x2246
; 0x07CB => VR_CONTRL CO_TEMP_A => 0x2257
; 0x07E9 => VR_CONT_1 CO_TEMP_B => 0x2258
; 0x07F4 => VR_CONT_2 CO_TEMP_C => 0x2273
; 0x0800 => VR_CONT_3 CO_TEMP_D => 0x227D
; 0x0802 => LD_BLOCK CO_TEMP_E => 0x2287
; 0x0806 => REPORT_R code => 0x3669
; 0x0808 => LD_CONTRL comma_sp => 0x1537
; 0x0819 => LD_CONT_1 CONTINUE => 0x1E5F
; 0x0825 => LD_CONT_2 COORDS => 0x5C7D
; 0x082E => LD_DATA COORDS_hi => 0x5C7E
; 0x084C => LD_DATA_1 COPY => 0x0EAC
; 0x0873 => LD_PROG COPY_1 => 0x0EB2
; 0x08AD => LD_PROG_1 COPY_2 => 0x0EC9
; 0x08B6 => ME_CONTRL COPY_3 => 0x0ED3
; 0x08CE => X08CE COPY_BUFF => 0x0ECD
; 0x08D2 => ME_NEW_LP COPY_END => 0x0EDA
; 0x08D7 => ME_OLD_LP COPY_L_1 => 0x0EFD
; 0x08DF => ME_OLD_L1 COPY_L_2 => 0x0F0C
; 0x08EB => ME_NEW_L2 COPY_L_3 => 0x0F14
; 0x08F0 => ME_VAR_LP COPY_L_4 => 0x0F18
; 0x08F9 => ME_OLD_VP COPY_L_5 => 0x0F1E
; 0x0901 => ME_OLD_V1 COPY_LINE => 0x0EF4
; 0x0909 => ME_OLD_V2 copyright => 0x1539
; 0x0912 => ME_OLD_V3 cos => 0x37AA
; 0x091E => ME_OLD_V4 COUNT_ONE => 0x31FA
; 0x0921 => ME_VAR_L1 CP_LINES => 0x1980
; 0x0923 => ME_VAR_L2 CTL_CODES => 0x0260
; 0x092C => ME_ENTER ctlchrtab => 0x0A11
; 0x093E => ME_ENT_1 CURCHL => 0x5C51
; 0x0955 => ME_ENT_2 D_L_DIAG => 0x24D4
; 0x0958 => ME_ENT_3 D_L_HR_VT => 0x24DB
; 0x0970 => SA_CONTRL D_L_LOOP => 0x24CE
; 0x0991 => SA_1_SEC D_L_PLOT => 0x24EC
; 0x09A1 => tape_msgs D_L_RANGE => 0x24F7
; 0x09C1 => tape_msgs_2 D_L_STEP => 0x24DF
; 0x09F4 => PRINT_OUT D_LETTER => 0x2C1F
; 0x0A11 => ctlchrtab D_NO_LOOP => 0x2C2E
; 0x0A23 => PO_BACK_1 D_RPORT_C => 0x2C05
; 0x0A38 => PO_BACK_2 D_RUN => 0x2C15
; 0x0A3A => PO_BACK_3 D_SIZE => 0x2C2D
; 0x0A3D => PO_RIGHT DATA => 0x1E27
; 0x0A4F => PO_ENTER DATA_1 => 0x1E2C
; 0x0A5F => PO_COMMA DATA_2 => 0x1E37
; 0x0A69 => PO_QUEST DATADD => 0x5C57
; 0x0A6D => PO_TV_2 DE__DE_1_ => 0x2AEE
; 0x0A75 => PO_2_OPER dec_jr_nz => 0x367A
; 0x0A7A => PO_1_OPER DEC_RPT_C => 0x2CCF
; 0x0A7D => PO_TV_1 DEC_STO_1 => 0x2CD5
; 0x0A80 => PO_CHANGE DEC_TO_FP => 0x2C9B
; 0x0A87 => PO_CONT DECIMAL => 0x2CCB
; 0x0AAC => PO_AT_ERR DEF_FN => 0x1F60
; 0x0ABF => PO_AT_SET DEF_FN_1 => 0x1F6A
; 0x0AC2 => PO_TAB DEF_FN_2 => 0x1F7D
; 0x0AC3 => PO_FILL DEF_FN_3 => 0x1F86
; 0x0AD0 => PO_SPACE DEF_FN_4 => 0x1F89
; 0x0AD9 => PO_ABLE DEF_FN_5 => 0x1F94
; 0x0ADC => PO_STORE DEF_FN_6 => 0x1FA6
; 0x0AF0 => PO_ST_E DEF_FN_7 => 0x1FBD
; 0x0AFC => PO_ST_PR DEFADD => 0x5C0B
; 0x0B03 => PO_FETCH delete => 0x33A1
; 0x0B1D => PO_F_PR DEST => 0x5C4D
; 0x0B24 => PO_ANY DF_CC => 0x5C84
; 0x0B38 => PO_GR_1 DF_SZ => 0x5C6B
; 0x0B3E => PO_GR_2 DFCCL => 0x5C86
; 0x0B4C => PO_GR_3 DIFFER => 0x19DD
; 0x0B52 => PO_T_UDG DIM => 0x2C02
; 0x0B5F => PO_T DIM_CLEAR => 0x2C7C
; 0x0B65 => PO_CHAR DIM_SIZES => 0x2C7F
; 0x0B6A => PO_CHAR_2 div_34th => 0x31DB
; 0x0B76 => PO_CHAR_3 DIV_LOOP => 0x31D2
; 0x0B7F => PR_ALL DIV_START => 0x31E2
; 0x0B93 => PR_ALL_1 division => 0x31AF
; 0x0BA4 => PR_ALL_2 DIVN_EXPT => 0x313D
; 0x0BB6 => PR_ALL_3 DL_LARGER => 0x24CB
; 0x0BB7 => PR_ALL_4 DL_X_GE_Y => 0x24C4
; 0x0BC1 => PR_ALL_5 DOUBLE_A => 0x338C
; 0x0BD3 => PR_ALL_6 DR_3_PRMS => 0x238D
; 0x0BDB => PO_ATTR DR_PRMS => 0x23C1
; 0x0BFA => PO_ATTR_1 DR_SIN_NZ => 0x23A3
; 0x0C08 => PO_ATTR_2 DRAW => 0x2382
; 0x0C0A => PO_MSG DRAW_LINE => 0x24B7
; 0x0C10 => PO_TOKENS DRAW_SAVE => 0x2497
; 0x0C14 => PO_TABLE DRW_STEPS => 0x2420
; 0x0C22 => PO_EACH E_DIGITS => 0x0284
; 0x0C35 => PO_TR_SP E_DIVSN => 0x2D6D
; 0x0C3B => PO_SAVE E_END => 0x2D7B
; 0x0C41 => PO_SEARCH E_FETCH => 0x2D6E
; 0x0C44 => PO_STEP E_FORMAT => 0x2CEB
; 0x0C55 => PO_SCR E_FP_JUMP => 0x2D18
; 0x0C86 => REPORT_5 E_L_1 => 0x1A15
; 0x0C88 => PO_SCR_2 E_LINE => 0x5C59
; 0x0CD2 => PO_SCR_3 E_LINE_NO => 0x19FB
; 0x0CF0 => PO_SCR_3A E_LOOP => 0x2D60
; 0x0CF8 => scrl_mssg E_PPC => 0x5C49
; 0x0D00 => REPORT_D E_SAVE => 0x2D55
; 0x0D02 => PO_SCR_4 E_TO_FP => 0x2D4F
; 0x0D1C => PO_SCR_4A E_TST_END => 0x2D71
; 0x0D2D => PO_SCR_4B E_UNSHIFT => 0x022C
; 0x0D4D => TEMPS EACH_S_1 => 0x1990
; 0x0D5B => TEMPS_1 EACH_S_2 => 0x1998
; 0x0D65 => TEMPS_2 EACH_S_3 => 0x199A
; 0x0D6B => CLS EACH_S_4 => 0x19A5
; 0x0D6E => CLS_LOWER EACH_S_5 => 0x19AD
; 0x0D87 => CLS_1 EACH_S_6 => 0x19B1
; 0x0D89 => CLS_2 EACH_STMT => 0x198B
; 0x0D8E => CLS_3 ECHO_E => 0x5C82
; 0x0D94 => CL_CHAN ED_AGAIN => 0x0F30
; 0x0DA0 => CL_CHAN_A ED_BLANK => 0x1150
; 0x0DAF => CL_ALL ED_C_DONE => 0x117C
; 0x0DD9 => CL_SET ED_C_END => 0x117E
; 0x0DEE => CL_SET_1 ED_CONTR => 0x0F6C
; 0x0DF4 => CL_SET_2 ED_COPY => 0x111D
; 0x0DFE => CL_SC_ALL ED_CUR => 0x1011
; 0x0E00 => CL_SCROLL ED_DELETE => 0x1015
; 0x0E05 => CL_SCR_1 ED_DOWN => 0x0FF3
; 0x0E0D => CL_SCR_2 ED_EDGE => 0x1031
; 0x0E19 => CL_SCR_3 ED_EDGE_1 => 0x103E
; 0x0E44 => CL_LINE ED_EDGE_2 => 0x1051
; 0x0E4A => CL_LINE_1 ED_EDIT => 0x0FA9
; 0x0E4D => CL_LINE_2 ED_END => 0x1026
; 0x0E80 => CL_LINE_3 ED_ENTER => 0x1024
; 0x0E88 => CL_ATTR ED_ERROR => 0x107F
; 0x0E9B => CL_ADDR ED_FULL => 0x1167
; 0x0EAC => COPY ED_GRAPH => 0x107C
; 0x0EAF => L0EAF ED_IGNORE => 0x101E
; 0x0EB2 => COPY_1 ED_KEYS => 0x0F92
; 0x0EC9 => COPY_2 ed_keys_t => 0x0FA0
; 0x0ECD => COPY_BUFF ED_LEFT => 0x1007
; 0x0ED3 => COPY_3 ED_LIST => 0x106E
; 0x0EDA => COPY_END ED_LOOP => 0x0F38
; 0x0EDF => CLEAR_PRB ED_RIGHT => 0x100C
; 0x0EE7 => PRB_BYTES ED_SPACES => 0x115E
; 0x0EF4 => COPY_LINE ED_STOP => 0x1001
; 0x0EFD => COPY_L_1 ED_SYMBOL => 0x1076
; 0x0F0A => REPORT_Dc ED_UP => 0x1059
; 0x0F0C => COPY_L_2 EDITOR => 0x0F2C
; 0x0F14 => COPY_L_3 end_calc => 0x369B
; 0x0F18 => COPY_L_4 END_COMPL => 0x30A3
; 0x0F1E => COPY_L_5 END_TESTS => 0x358C
; 0x0F2C => EDITOR ENT_TABLE => 0x338E
; 0x0F30 => ED_AGAIN ERR_NR => 0x5C3A
; 0x0F38 => ED_LOOP ERR_SP => 0x5C3D
; 0x0F6C => ED_CONTR ERROR_1 => 0x0008
; 0x0F81 => ADD_CHAR ERROR_2 => 0x0053
; 0x0F85 => X0F85 ERROR_3 => 0x0055
; 0x0F8B => ADD_CH_1 EX_OR_NOT => 0x3543
; 0x0F92 => ED_KEYS exchange => 0x343C
; 0x0FA0 => ed_keys_t EXIT => 0x36C2
; 0x0FA9 => ED_EDIT exp => 0x36C4
; 0x0FF3 => ED_DOWN EXPT_1NUM => 0x1C82
; 0x1001 => ED_STOP EXPT_2NUM => 0x1C7A
; 0x1007 => ED_LEFT EXPT_EXP => 0x1C8C
; 0x100C => ED_RIGHT EXT_SHIFT => 0x0246
; 0x1011 => ED_CUR F_FOUND => 0x1D7C
; 0x1015 => ED_DELETE F_L_S => 0x1D34
; 0x101E => ED_IGNORE F_LOOP => 0x1D64
; 0x1024 => ED_ENTER F_REORDER => 0x1D16
; 0x1026 => ED_END F_USE_1 => 0x1D10
; 0x1031 => ED_EDGE FETCH_NUM => 0x1CDE
; 0x103E => ED_EDGE_1 FETCH_TWO => 0x2FBA
; 0x1051 => ED_EDGE_2 FIND_I_1 => 0x1E9C
; 0x1059 => ED_UP FIND_INT1 => 0x1E94
; 0x106E => ED_LIST FIND_INT2 => 0x1E99
; 0x1076 => ED_SYMBOL FIRST_3D => 0x3380
; 0x107C => ED_GRAPH FLAGS => 0x5C3B
; 0x107F => ED_ERROR FLAGS2 => 0x5C6A
; 0x1097 => CLEAR_SP FLAGX => 0x5C71
; 0x10A8 => KEY_INPUT FN_SKPOVR => 0x28AB
; 0x10DB => KEY_M_CL FOR => 0x1D03
; 0x10E6 => KEY_MODE FORM_EXP => 0x33DE
; 0x10F4 => KEY_FLAG FP_0_1 => 0x350B
; 0x10FA => KEY_CONTR FP_A_END => 0x2DE1
; 0x1105 => KEY_DATA FP_CALC => 0x0028
; 0x110D => KEY_NEXT fp_calc_2 => 0x33A2
; 0x1113 => KEY_CHAN FP_DELETE => 0x2DAD
; 0x111B => KEY_DONE2 FP_TO_A => 0x2DD5
; 0x111D => ED_COPY FP_TO_BC => 0x2DA2
; 0x1150 => ED_BLANK FRAMES => 0x5C78
; 0x115E => ED_SPACES FRAMES3 => 0x5C7A
; 0x1167 => ED_FULL free_mem => 0x1F1A
; 0x117C => ED_C_DONE FRST_LESS => 0x3585
; 0x117E => ED_C_END FULL_ADDN => 0x303E
; 0x1190 => SET_HL GEN_ENT_1 => 0x335E
; 0x1195 => SET_DE GEN_ENT_2 => 0x3362
; 0x11A7 => REMOVE_FP get_argt => 0x3783
; 0x11B7 => NEW GET_CHAR => 0x0018
; 0x11CB => START_NEW GET_HL_DE => 0x2AF4
; 0x11DA => ram_check get_mem_xx => 0x340F
; 0x11DC => RAM_FILL GET_PARAM => 0x1B55
; 0x11E2 => RAM_READ GO_NC_MLT => 0x30A5
; 0x11EF => RAM_DONE GO_SUB => 0x1EED
; 0x1219 => RAM_SET GO_TO => 0x1E67
; 0x121C => NMI_VECT GO_TO_2 => 0x1E73
; 0x12A2 => MAIN_EXEC GRE_8 => 0x373D
; 0x12A9 => MAIN_1 greater_0 => 0x34F9
; 0x12AC => MAIN_2 HL_AGAIN => 0x30BC
; 0x12CF => MAIN_3 HL_END => 0x30BE
; 0x1303 => MAIN_4 HL_HL_DE => 0x30A9
; 0x1313 => MAIN_G HL_LOOP => 0x30B1
; 0x133C => MAIN_5 I_CARRY => 0x2AE8
; 0x1349 => X1349 I_RESTORE => 0x2AEB
; 0x1373 => MAIN_6 IF => 0x1CF0
; 0x1376 => MAIN_7 IF_1 => 0x1D00
; 0x1384 => MAIN_8 IN_ASSIGN => 0x21B9
; 0x1386 => MAIN_9 IN_CHAN_K => 0x21D6
; 0x1391 => rpt_mesgs in_func => 0x34A5
; 0x1537 => comma_sp IN_ITEM_1 => 0x20C1
; 0x1539 => copyright IN_ITEM_2 => 0x20D8
; 0x1555 => REPORT_G IN_ITEM_3 => 0x20ED
; 0x155D => MAIN_ADD IN_NEXT_1 => 0x21AF
; 0x157D => MAIN_ADD1 IN_NEXT_2 => 0x21B2
; 0x15AB => MAIN_ADD2 IN_PK_STK => 0x34B0
; 0x15AF => init_chan IN_PR_1 => 0x211A
; 0x15C4 => REPORT_J IN_PR_2 => 0x211C
; 0x15C6 => init_strm IN_PR_3 => 0x2129
; 0x15D4 => WAIT_KEY IN_PROMPT => 0x20FA
; 0x15DE => WAIT_KEY1 IN_STOP => 0x21D0
; 0x15E4 => REPORT_8 IN_VAR_1 => 0x213A
; 0x15E6 => INPUT_AD IN_VAR_2 => 0x2148
; 0x15EF => OUT_CODE IN_VAR_3 => 0x215E
; 0x15F2 => PRINT_A_2 IN_VAR_4 => 0x2161
; 0x15F7 => CALL_SUB IN_VAR_5 => 0x2174
; 0x1601 => CHAN_OPEN IN_VAR_6 => 0x219B
; 0x160E => REPORT_Oa INDEXER => 0x16DC
; 0x1610 => CHAN_OP_1 INDEXER_1 => 0x16DB
; 0x1615 => CHAN_FLAG init_chan => 0x15AF
; 0x162C => CALL_JUMP init_strm => 0x15C6
; 0x162D => chn_cd_lu INPUT => 0x2089
; 0x1634 => CHAN_K INPUT_1 => 0x2096
; 0x1642 => CHAN_S INPUT_2 => 0x20AD
; 0x1646 => CHAN_S_1 INPUT_AD => 0x15E6
; 0x164D => CHAN_P int => 0x36AF
; 0x1652 => ONE_SPACE INT_CASE => 0x3483
; 0x1655 => MAKE_ROOM INT_EXP1 => 0x2ACC
; 0x1664 => POINTERS INT_EXP2 => 0x2ACD
; 0x166B => PTR_NEXT INT_FETCH => 0x2D7F
; 0x167F => PTR_DONE INT_STORE => 0x2D8E
; 0x168F => LINE_ZERO INT_TO_FP => 0x2D3B
; 0x1691 => LINE_NO_A IX_END => 0x3290
; 0x1695 => LINE_NO JUMP => 0x3686
; 0x169E => RESERVE JUMP_2 => 0x3687
; 0x16B0 => SET_MIN jump_true => 0x368F
; 0x16BF => SET_WORK K_8___9 => 0x0382
; 0x16C5 => SET_STK K___CHAR => 0x03B2
; 0x16D4 => REC_EDIT K_CH_SET => 0x02D1
; 0x16DB => INDEXER_1 K_CUR => 0x5C5B
; 0x16DC => INDEXER K_DATA => 0x5C0D
; 0x16E5 => CLOSE K_DECODE => 0x0333
; 0x16FC => CLOSE_1 K_DIGIT => 0x0367
; 0x1701 => CLOSE_2 K_E_LET => 0x0341
; 0x1708 => ROM_TRAP K_END => 0x0308
; 0x1716 => cl_str_lu K_GRA_DGT => 0x0389
; 0x171C => CLOSE_STR K_KLC_DGT => 0x039D
; 0x171E => STR_DATA K_KLC_LET => 0x034F
; 0x1725 => REPORT_Ob K_LOOK_UP => 0x034A
; 0x1727 => STR_DATA1 K_MAIN => 0x032C
; 0x1736 => OPEN K_NEW => 0x02F1
; 0x1756 => OPEN_1 K_REPEAT => 0x0310
; 0x175D => OPEN_2 K_ST_LOOP => 0x02C6
; 0x1765 => REPORT_Fb K_TEST => 0x031E
; 0x1767 => OPEN_3 K_TOKENS => 0x0364
; 0x177A => op_str_lu KEY_3KEYS => 0x029F
; 0x1781 => OPEN_K KEY_BITS => 0x02A1
; 0x1785 => OPEN_S KEY_CHAN => 0x1113
; 0x1789 => OPEN_P KEY_CONTR => 0x10FA
; 0x178B => OPEN_END KEY_DATA => 0x1105
; 0x1793 => CAT_ETC KEY_DONE => 0x02AB
; 0x1795 => AUTO_LIST KEY_DONE2 => 0x111B
; 0x17CE => AUTO_L_1 KEY_FLAG => 0x10F4
; 0x17E1 => AUTO_L_2 KEY_INPUT => 0x10A8
; 0x17E4 => AUTO_L_3 KEY_INT => 0x0048
; 0x17ED => AUTO_L_4 KEY_LINE => 0x0296
; 0x17F5 => LLIST KEY_M_CL => 0x10DB
; 0x17F9 => LIST KEY_MODE => 0x10E6
; 0x17FB => LIST_1 KEY_NEXT => 0x110D
; 0x1814 => LIST_2 KEY_SCAN => 0x028E
; 0x181A => LIST_3 KEYBOARD => 0x02BF
; 0x181F => LIST_4 KSTATE => 0x5C00
; 0x1822 => LIST_5 KSTATE1 => 0x5C01
; 0x1833 => LIST_ALL KSTATE2 => 0x5C02
; 0x1835 => LIST_ALL_2 KSTATE3 => 0x5C03
; 0x1855 => OUT_LINE KSTATE4 => 0x5C04
; 0x1865 => OUT_LINE1 KSTATE5 => 0x5C05
; 0x187D => OUT_LINE2 KSTATE6 => 0x5C06
; 0x1881 => OUT_LINE3 KSTATE7 => 0x5C07
; 0x1894 => OUT_LINE4 L0609 => 0x0609
; 0x18A1 => OUT_LINE5 L0EAF => 0x0EAF
; 0x18B4 => OUT_LINE6 L1CA5 => 0x1CA5
; 0x18B6 => NUMBER L2758 => 0x2758
; 0x18C1 => OUT_FLASH L2E25 => 0x2E25
; 0x18E1 => OUT_CURS L_ADD_ => 0x2BAF
; 0x18F3 => OUT_C_1 L_CHAR => 0x2B3E
; 0x1909 => OUT_C_2 L_DELETE_ => 0x2B72
; 0x190F => LN_FETCH L_EACH_CH => 0x2B0B
; 0x191C => LN_STORE L_ENTER => 0x2BA6
; 0x1925 => OUT_SP_2 L_EXISTS => 0x2B66
; 0x192A => OUT_SP_NO L_FIRST => 0x2BEA
; 0x192B => OUT_SP_1 L_IN_W_S => 0x2BA3
; 0x1937 => OUT_CHAR L_LENGTH => 0x2B9B
; 0x195A => OUT_CH_1 L_NEW_ => 0x2BC0
; 0x1968 => OUT_CH_2 L_NO_SP => 0x2B0C
; 0x196C => OUT_CH_3 L_NUMERIC => 0x2B59
; 0x196E => LINE_ADDR L_SINGLE => 0x2B4F
; 0x1974 => LINE_AD_1 L_SPACES => 0x2B29
; 0x1980 => CP_LINES L_STRING => 0x2BC6
; 0x1988 => not_used L_TEST_CH => 0x2B1F
; 0x198B => EACH_STMT LAST => 0x386C
; 0x1990 => EACH_S_1 LAST_K => 0x5C08
; 0x1998 => EACH_S_2 LD_8_BITS => 0x05CA
; 0x199A => EACH_S_3 LD_BLOCK => 0x0802
; 0x19A5 => EACH_S_4 LD_BREAK => 0x056B
; 0x19AD => EACH_S_5 LD_BYTES => 0x0556
; 0x19B1 => EACH_S_6 LD_CH_PR => 0x07AD
; 0x19B8 => NEXT_ONE LD_CONT_1 => 0x0819
; 0x19C7 => NEXT_O_1 LD_CONT_2 => 0x0825
; 0x19CE => NEXT_O_2 LD_CONTRL => 0x0808
; 0x19D5 => NEXT_O_3 LD_DATA => 0x082E
; 0x19D6 => NEXT_O_4 LD_DATA_1 => 0x084C
; 0x19DB => NEXT_O_5 LD_DEC => 0x05C4
; 0x19DD => DIFFER LD_DELAY => 0x05E9
; 0x19E5 => RECLAIM_1 LD_EDGE_1 => 0x05E7
; 0x19E8 => RECLAIM_2 LD_EDGE_2 => 0x05E3
; 0x19FB => E_LINE_NO LD_FLAG => 0x05B3
; 0x1A15 => E_L_1 LD_LEADER => 0x0580
; 0x1A1B => OUT_NUM_1 LD_LOOK_H => 0x0767
; 0x1A28 => OUT_NUM_2 LD_LOOP => 0x05A9
; 0x1A30 => OUT_NUM_3 LD_MARKER => 0x05C8
; 0x1A42 => OUT_NUM_4 LD_NAME => 0x07A6
; 0x1A48 => offst_tbl LD_NEXT => 0x05C2
; 0x1A7A => P_LET LD_PROG => 0x0873
; 0x1A7D => P_GO_TO LD_PROG_1 => 0x08AD
; 0x1A81 => P_IF LD_SAMPLE => 0x05ED
; 0x1A86 => P_GO_SUB LD_START => 0x056C
; 0x1A8A => P_STOP LD_SYNC => 0x058F
; 0x1A8D => P_RETURN LD_TYPE => 0x078A
; 0x1A90 => P_FOR LD_VERIFY => 0x05BD
; 0x1A98 => P_NEXT LD_WAIT => 0x0574
; 0x1A9C => P_PRINT len => 0x3674
; 0x1A9F => P_INPUT less_0 => 0x3506
; 0x1AA2 => P_DIM LESS_MASK => 0x328A
; 0x1AA5 => P_REM LET => 0x2AFF
; 0x1AA8 => P_NEW LINE_AD_1 => 0x1974
; 0x1AAB => P_RUN LINE_ADDR => 0x196E
; 0x1AAE => P_LIST LINE_DRAW => 0x2477
; 0x1AB1 => P_POKE LINE_END => 0x1BB3
; 0x1AB5 => P_RANDOM LINE_NEW => 0x1B9E
; 0x1AB8 => P_CONT LINE_NO => 0x1695
; 0x1ABB => P_CLEAR LINE_NO_A => 0x1691
; 0x1ABE => P_CLS LINE_RUN => 0x1B8A
; 0x1AC1 => P_PLOT LINE_SCAN => 0x1B17
; 0x1AC5 => P_PAUSE LINE_USE => 0x1BBF
; 0x1AC9 => P_READ LINE_ZERO => 0x168F
; 0x1ACC => P_DATA LIST => 0x17F9
; 0x1ACF => P_RESTORE LIST_1 => 0x17FB
; 0x1AD2 => P_DRAW LIST_2 => 0x1814
; 0x1AD6 => P_COPY LIST_3 => 0x181A
; 0x1AD9 => P_LPRINT LIST_4 => 0x181F
; 0x1ADC => P_LLIST LIST_5 => 0x1822
; 0x1ADF => P_SAVE LIST_ALL => 0x1833
; 0x1AE0 => P_LOAD LIST_ALL_2 => 0x1835
; 0x1AE1 => P_VERIFY LIST_SP => 0x5C3F
; 0x1AE2 => P_MERGE LLIST => 0x17F5
; 0x1AE3 => P_BEEP ln => 0x3713
; 0x1AE7 => P_CIRCLE LN_FETCH => 0x190F
; 0x1AEB => P_INK LN_STORE => 0x191C
; 0x1AEC => P_PAPER LOC_MEM => 0x3406
; 0x1AED => P_FLASH LOG_2_A_ => 0x2DC1
; 0x1AEE => P_BRIGHT LOOK_P_1 => 0x1D8B
; 0x1AEF => P_INVERSE LOOK_P_2 => 0x1DA3
; 0x1AF0 => P_OVER LOOK_PROG => 0x1D86
; 0x1AF1 => P_OUT LOOK_VARS => 0x28B2
; 0x1AF5 => P_BORDER LPRINT => 0x1FC9
; 0x1AF9 => P_DEF_FN MAIN_1 => 0x12A9
; 0x1AFC => P_OPEN MAIN_2 => 0x12AC
; 0x1B02 => P_CLOSE MAIN_3 => 0x12CF
; 0x1B06 => P_FORMAT MAIN_4 => 0x1303
; 0x1B0A => P_MOVE MAIN_5 => 0x133C
; 0x1B10 => P_ERASE MAIN_6 => 0x1373
; 0x1B14 => P_CAT MAIN_7 => 0x1376
; 0x1B17 => LINE_SCAN MAIN_8 => 0x1384
; 0x1B28 => STMT_LOOP MAIN_9 => 0x1386
; 0x1B29 => STMT_L_1 MAIN_ADD => 0x155D
; 0x1B52 => SCAN_LOOP MAIN_ADD1 => 0x157D
; 0x1B55 => GET_PARAM MAIN_ADD2 => 0x15AB
; 0x1B6F => SEPARATOR MAIN_EXEC => 0x12A2
; 0x1B76 => STMT_RET MAIN_G => 0x1313
; 0x1B7B => REPORT_L MAIN_KEYS => 0x0205
; 0x1B7D => STMT_R_1 MAKE_EXPT => 0x313B
; 0x1B8A => LINE_RUN MAKE_ROOM => 0x1655
; 0x1B9E => LINE_NEW MASK_INT => 0x0038
; 0x1BB0 => REPORT_0 MASK_P => 0x5C8E
; 0x1BB2 => REM MASK_T => 0x5C90
; 0x1BB3 => LINE_END ME_CONTRL => 0x08B6
; 0x1BBF => LINE_USE ME_ENT_1 => 0x093E
; 0x1BD1 => NEXT_LINE ME_ENT_2 => 0x0955
; 0x1BEC => REPORT_N ME_ENT_3 => 0x0958
; 0x1BEE => CHECK_END ME_ENTER => 0x092C
; 0x1BF4 => STMT_NEXT ME_NEW_L2 => 0x08EB
; 0x1C01 => class_tbl ME_NEW_LP => 0x08D2
; 0x1C0D => CLASS_03 ME_OLD_L1 => 0x08DF
; 0x1C10 => CLASS_00 ME_OLD_LP => 0x08D7
; 0x1C11 => CLASS_05 ME_OLD_V1 => 0x0901
; 0x1C1F => CLASS_01 ME_OLD_V2 => 0x0909
; 0x1C22 => VAR_A_1 ME_OLD_V3 => 0x0912
; 0x1C2E => REPORT_2 ME_OLD_V4 => 0x091E
; 0x1C30 => VAR_A_2 ME_OLD_VP => 0x08F9
; 0x1C46 => VAR_A_3 ME_VAR_L1 => 0x0921
; 0x1C4E => CLASS_02 ME_VAR_L2 => 0x0923
; 0x1C56 => VAL_FET_1 ME_VAR_LP => 0x08F0
; 0x1C59 => VAL_FET_2 MEM => 0x5C68
; 0x1C6C => CLASS_04 MEMBOT => 0x5C92
; 0x1C79 => NEXT_2NUM MLT_LOOP => 0x3114
; 0x1C7A => EXPT_2NUM MODE => 0x5C41
; 0x1C82 => EXPT_1NUM MOVE_FP => 0x33C0
; 0x1C8A => REPORT_C MULT_LONG => 0x30F0
; 0x1C8C => EXPT_EXP MULT_OFLW => 0x30EF
; 0x1C96 => CLASS_07 MULT_RSLT => 0x30EA
; 0x1CA5 => L1CA5 multiply => 0x30CA
; 0x1CBE => CLASS_09 n_mod_m => 0x36A0
; 0x1CD6 => CL_09_1 N_NEGTV => 0x3705
; 0x1CDB => CLASS_0B NEAR_ZERO => 0x3159
; 0x1CDE => FETCH_NUM NEG_BYTE => 0x2FAF
; 0x1CE6 => USE_ZERO NEG_TEST => 0x3474
; 0x1CEE => STOP_BAS negate => 0x346E
; 0x1CF0 => IF NEW => 0x11B7
; 0x1D00 => IF_1 NEWPPC => 0x5C42
; 0x1D03 => FOR NEXT => 0x1DAB
; 0x1D10 => F_USE_1 NEXT_1 => 0x1DE2
; 0x1D16 => F_REORDER NEXT_2 => 0x1DE9
; 0x1D34 => F_L_S NEXT_2NUM => 0x1C79
; 0x1D64 => F_LOOP NEXT_CHAR => 0x0020
; 0x1D7C => F_FOUND NEXT_LINE => 0x1BD1
; 0x1D84 => REPORT_I NEXT_LOOP => 0x1DDA
; 0x1D86 => LOOK_PROG NEXT_O_1 => 0x19C7
; 0x1D8B => LOOK_P_1 NEXT_O_2 => 0x19CE
; 0x1DA3 => LOOK_P_2 NEXT_O_3 => 0x19D5
; 0x1DAB => NEXT NEXT_O_4 => 0x19D6
; 0x1DD8 => REPORT_1 NEXT_O_5 => 0x19DB
; 0x1DDA => NEXT_LOOP NEXT_ONE => 0x19B8
; 0x1DE2 => NEXT_1 NIL_BYTES => 0x3272
; 0x1DE9 => NEXT_2 NMI_VECT => 0x121C
; 0x1DEC => READ_3 NMIADD => 0x5CB0
; 0x1DED => READ no___no => 0x3524
; 0x1E08 => REPORT_E NO_ADD => 0x311B
; 0x1E0A => READ_1 no_l_eql_etc_ => 0x353B
; 0x1E1E => READ_2 NO_RESET => 0x0070
; 0x1E27 => DATA NO_RSTORE => 0x31F9
; 0x1E2C => DATA_1 NORMALISE => 0x316C
; 0x1E37 => DATA_2 NORML_NOW => 0x3186
; 0x1E39 => PASS_BY not => 0x3501
; 0x1E42 => RESTORE NOT_BIN => 0x2CB8
; 0x1E45 => REST_RUN not_used => 0x1988
; 0x1E4F => RANDOMIZE NSPPC => 0x5C44
; 0x1E5A => RAND_1 NU_OR_STR => 0x354E
; 0x1E5F => CONTINUE NUMBER => 0x18B6
; 0x1E67 => GO_TO NUMERIC => 0x2D1B
; 0x1E73 => GO_TO_2 NXT_DGT_1 => 0x2CDA
; 0x1E7A => OUT_BAS NXT_DGT_2 => 0x2D40
; 0x1E80 => POKE NXTLIN => 0x5C55
; 0x1E85 => TWO_PARAM offst_tbl => 0x1A48
; 0x1E8E => TWO_P_1 OFLOW_CLR => 0x3195
; 0x1E94 => FIND_INT1 OFLW1_CLR => 0x3146
; 0x1E99 => FIND_INT2 OFLW2_CLR => 0x3151
; 0x1E9C => FIND_I_1 OLDPPC => 0x5C6E
; 0x1E9F => REPORT_Bb ONE => 0x386A
; 0x1EA1 => RUN ONE_SHIFT => 0x2FE5
; 0x1EAC => CLEAR ONE_SPACE => 0x1652
; 0x1EAF => CLEAR_RUN op_str_lu => 0x177A
; 0x1EB7 => CLEAR_1 OPEN => 0x1736
; 0x1EDA => REPORT_M OPEN_1 => 0x1756
; 0x1EDC => CLEAR_2 OPEN_2 => 0x175D
; 0x1EED => GO_SUB OPEN_3 => 0x1767
; 0x1F05 => TEST_ROOM OPEN_END => 0x178B
; 0x1F15 => REPORT_4 OPEN_K => 0x1781
; 0x1F1A => free_mem OPEN_P => 0x1789
; 0x1F23 => RETURN OPEN_S => 0x1785
; 0x1F36 => REPORT_7 or_func => 0x351B
; 0x1F3A => PAUSE OSPCC => 0x5C70
; 0x1F3D => PAUSE_1 OTHER_STR => 0x35B7
; 0x1F49 => PAUSE_2 OUT_BAS => 0x1E7A
; 0x1F4F => PAUSE_END OUT_C_1 => 0x18F3
; 0x1F54 => BREAK_KEY OUT_C_2 => 0x1909
; 0x1F60 => DEF_FN OUT_CH_1 => 0x195A
; 0x1F6A => DEF_FN_1 OUT_CH_2 => 0x1968
; 0x1F7D => DEF_FN_2 OUT_CH_3 => 0x196C
; 0x1F86 => DEF_FN_3 OUT_CHAR => 0x1937
; 0x1F89 => DEF_FN_4 OUT_CODE => 0x15EF
; 0x1F94 => DEF_FN_5 OUT_CURS => 0x18E1
; 0x1FA6 => DEF_FN_6 OUT_FLASH => 0x18C1
; 0x1FBD => DEF_FN_7 OUT_LINE => 0x1855
; 0x1FC3 => UNSTACK_Z OUT_LINE1 => 0x1865
; 0x1FC9 => LPRINT OUT_LINE2 => 0x187D
; 0x1FCD => PRINT OUT_LINE3 => 0x1881
; 0x1FCF => PRINT_1 OUT_LINE4 => 0x1894
; 0x1FDF => PRINT_2 OUT_LINE5 => 0x18A1
; 0x1FE5 => PRINT_3 OUT_LINE6 => 0x18B4
; 0x1FF2 => PRINT_4 OUT_NUM_1 => 0x1A1B
; 0x1FF5 => PRINT_CR OUT_NUM_2 => 0x1A28
; 0x1FFC => PR_ITEM_1 OUT_NUM_3 => 0x1A30
; 0x200E => PR_ITEM_2 OUT_NUM_4 => 0x1A42
; 0x201E => PR_AT_TAB OUT_SP_1 => 0x192B
; 0x2024 => PR_ITEM_3 OUT_SP_2 => 0x1925
; 0x203C => PR_STRING OUT_SP_NO => 0x192A
; 0x2045 => PR_END_Z P_BEEP => 0x1AE3
; 0x2048 => PR_ST_END P_BORDER => 0x1AF5
; 0x204E => PR_POSN_1 P_BRIGHT => 0x1AEE
; 0x2061 => PR_POSN_2 P_CAT => 0x1B14
; 0x2067 => PR_POSN_3 P_CIRCLE => 0x1AE7
; 0x206E => PR_POSN_4 P_CLEAR => 0x1ABB
; 0x2070 => STR_ALTER P_CLOSE => 0x1B02
; 0x2089 => INPUT P_CLS => 0x1ABE
; 0x2096 => INPUT_1 P_CONT => 0x1AB8
; 0x20AD => INPUT_2 P_COPY => 0x1AD6
; 0x20C1 => IN_ITEM_1 P_DATA => 0x1ACC
; 0x20D8 => IN_ITEM_2 P_DEF_FN => 0x1AF9
; 0x20ED => IN_ITEM_3 P_DIM => 0x1AA2
; 0x20FA => IN_PROMPT P_DRAW => 0x1AD2
; 0x211A => IN_PR_1 P_ERASE => 0x1B10
; 0x211C => IN_PR_2 P_FLAG => 0x5C91
; 0x2129 => IN_PR_3 P_FLASH => 0x1AED
; 0x213A => IN_VAR_1 P_FOR => 0x1A90
; 0x2148 => IN_VAR_2 P_FORMAT => 0x1B06
; 0x215E => IN_VAR_3 P_GO_SUB => 0x1A86
; 0x2161 => IN_VAR_4 P_GO_TO => 0x1A7D
; 0x2174 => IN_VAR_5 P_IF => 0x1A81
; 0x219B => IN_VAR_6 P_INK => 0x1AEB
; 0x21AF => IN_NEXT_1 P_INPUT => 0x1A9F
; 0x21B2 => IN_NEXT_2 p_int_sto => 0x2D8C
; 0x21B9 => IN_ASSIGN P_INVERSE => 0x1AEF
; 0x21CE => REPORT_Cb P_LET => 0x1A7A
; 0x21D0 => IN_STOP P_LIST => 0x1AAE
; 0x21D4 => REPORT_H P_LLIST => 0x1ADC
; 0x21D6 => IN_CHAN_K P_LOAD => 0x1AE0
; 0x21E1 => CO_TEMP_1 P_LPRINT => 0x1AD9
; 0x21E2 => CO_TEMP_2 P_MERGE => 0x1AE2
; 0x21F2 => CO_TEMP_3 P_MOVE => 0x1B0A
; 0x21FC => CO_TEMP_4 P_NEW => 0x1AA8
; 0x2211 => CO_TEMP_5 P_NEXT => 0x1A98
; 0x2228 => CO_TEMP_6 P_OPEN => 0x1AFC
; 0x2234 => CO_TEMP_7 P_OUT => 0x1AF1
; 0x223E => CO_TEMP_8 P_OVER => 0x1AF0
; 0x2244 => REPORT_K P_PAPER => 0x1AEC
; 0x2246 => CO_TEMP_9 P_PAUSE => 0x1AC5
; 0x2257 => CO_TEMP_A P_PLOT => 0x1AC1
; 0x2258 => CO_TEMP_B P_POKE => 0x1AB1
; 0x226C => CO_CHANGE P_POSN => 0x5C7F
; 0x2273 => CO_TEMP_C P_PRINT => 0x1A9C
; 0x227D => CO_TEMP_D P_RAMT => 0x5CB4
; 0x2287 => CO_TEMP_E P_RANDOM => 0x1AB5
; 0x2294 => BORDER P_READ => 0x1AC9
; 0x22A6 => BORDER_1 P_REM => 0x1AA5
; 0x22AA => PIXEL_ADD P_RESTORE => 0x1ACF
; 0x22CB => POINT_SUB P_RETURN => 0x1A8D
; 0x22D4 => POINT_LP P_RUN => 0x1AAB
; 0x22DC => PLOT P_SAVE => 0x1ADF
; 0x22E5 => PLOT_SUB P_STOP => 0x1A8A
; 0x22F0 => PLOT_LOOP P_VERIFY => 0x1AE1
; 0x22FD => PL_TST_IN PASS_BY => 0x1E39
; 0x2303 => PLOT_END PAUSE => 0x1F3A
; 0x2307 => STK_TO_BC PAUSE_1 => 0x1F3D
; 0x2314 => STK_TO_A PAUSE_2 => 0x1F49
; 0x2320 => CIRCLE PAUSE_END => 0x1F4F
; 0x233B => C_R_GRE_1 peek => 0x34AC
; 0x235A => C_ARC_GE1 PF_ALL_9 => 0x2EB8
; 0x2382 => DRAW PF_BITS => 0x2E7B
; 0x238D => DR_3_PRMS PF_BYTES => 0x2E8A
; 0x23A3 => DR_SIN_NZ PF_COUNT => 0x2F2D
; 0x23C1 => DR_PRMS PF_DC_OUT => 0x2F5E
; 0x2420 => DRW_STEPS PF_DEC_0S => 0x2F64
; 0x2425 => ARC_LOOP PF_DIGITS => 0x2EA1
; 0x2439 => ARC_START PF_E_FRMT => 0x2F6C
; 0x245F => ARC_END PF_E_POS => 0x2F83
; 0x2477 => LINE_DRAW PF_E_SBRN => 0x2F4A
; 0x247D => CD_PRMS1 PF_E_SIGN => 0x2F85
; 0x2495 => USE_252 PF_FR_DGT => 0x2EEC
; 0x2497 => DRAW_SAVE PF_FR_EXX => 0x2EEF
; 0x24B7 => DRAW_LINE PF_FRACTN => 0x2ECF
; 0x24C4 => DL_X_GE_Y PF_FRN_LP => 0x2EDF
; 0x24CB => DL_LARGER PF_INSERT => 0x2EA9
; 0x24CE => D_L_LOOP PF_LARGE => 0x2E56
; 0x24D4 => D_L_DIAG PF_LOOP => 0x2E01
; 0x24DB => D_L_HR_VT PF_MEDIUM => 0x2E6F
; 0x24DF => D_L_STEP PF_MORE => 0x2ECB
; 0x24EC => D_L_PLOT PF_NEGTVE => 0x2DF2
; 0x24F7 => D_L_RANGE PF_NOT_E => 0x2F46
; 0x24F9 => REPORT_Bc PF_OUT_DT => 0x2F59
; 0x24FB => SCANNING PF_OUT_LP => 0x2F52
; 0x24FF => S_LOOP_1 PF_POSTVE => 0x2DF8
; 0x250F => S_QUOTE_S PF_R_BACK => 0x2F25
; 0x2522 => S_2_COORD PF_RND_LP => 0x2F18
; 0x252D => S_RPORT_C PF_ROUND => 0x2F0C
; 0x2530 => SYNTAX_Z PF_SAVE => 0x2E1E
; 0x2535 => S_SCRN__S PF_SMALL => 0x2E24
; 0x254F => S_SCRN_LP PF_TEST_2 => 0x2EB3
; 0x255A => S_SC_MTCH PIP => 0x5C39
; 0x255D => S_SC_ROWS PIXEL_ADD => 0x22AA
; 0x2573 => S_SCR_NXT PL_TST_IN => 0x22FD
; 0x257D => S_SCR_STO PLOT => 0x22DC
; 0x2580 => S_ATTR_S PLOT_END => 0x2303
; 0x2596 => scan_func PLOT_LOOP => 0x22F0
; 0x25AF => S_U_PLUS PLOT_SUB => 0x22E5
; 0x25B3 => S_QUOTE PO_1_OPER => 0x0A7A
; 0x25BE => S_Q_AGAIN PO_2_OPER => 0x0A75
; 0x25CB => S_Q_COPY PO_ABLE => 0x0AD9
; 0x25D9 => S_Q_PRMS PO_ANY => 0x0B24
; 0x25DB => S_STRING PO_AT_ERR => 0x0AAC
; 0x25E8 => S_BRACKET PO_AT_SET => 0x0ABF
; 0x25F5 => S_FN PO_ATTR => 0x0BDB
; 0x25F8 => S_RND PO_ATTR_1 => 0x0BFA
; 0x2625 => S_RND_END PO_ATTR_2 => 0x0C08
; 0x2627 => S_PI PO_BACK_1 => 0x0A23
; 0x2630 => S_PI_END PO_BACK_2 => 0x0A38
; 0x2634 => S_INKEY_ PO_BACK_3 => 0x0A3A
; 0x2660 => S_IK__STK PO_CHANGE => 0x0A80
; 0x2665 => S_INK__EN PO_CHAR => 0x0B65
; 0x2668 => S_SCREEN_ PO_CHAR_2 => 0x0B6A
; 0x2672 => S_ATTR PO_CHAR_3 => 0x0B76
; 0x267B => S_POINT PO_COMMA => 0x0A5F
; 0x2684 => S_ALPHNUM PO_CONT => 0x0A87
; 0x268D => S_DECIMAL PO_EACH => 0x0C22
; 0x26B5 => S_STK_DEC PO_ENTER => 0x0A4F
; 0x26B6 => S_SD_SKIP PO_F_PR => 0x0B1D
; 0x26C3 => S_NUMERIC PO_FETCH => 0x0B03
; 0x26C9 => S_LETTER PO_FILL => 0x0AC3
; 0x26DD => S_CONT_1 PO_GR_1 => 0x0B38
; 0x26DF => S_NEGATE PO_GR_2 => 0x0B3E
; 0x2707 => S_NO_TO__ PO_GR_3 => 0x0B4C
; 0x270D => S_PUSH_PO PO_MSG => 0x0C0A
; 0x2712 => S_CONT_2 PO_QUEST => 0x0A69
; 0x2713 => S_CONT_3 PO_RIGHT => 0x0A3D
; 0x2723 => S_OPERTR PO_SAVE => 0x0C3B
; 0x2734 => S_LOOP PO_SCR => 0x0C55
; 0x274C => S_STK_LST PO_SCR_2 => 0x0C88
; 0x2758 => L2758 PO_SCR_3 => 0x0CD2
; 0x275B => S_SYNTEST PO_SCR_3A => 0x0CF0
; 0x2761 => S_RPORT_C2 PO_SCR_4 => 0x0D02
; 0x2764 => S_RUNTEST PO_SCR_4A => 0x0D1C
; 0x2770 => S_LOOPEND PO_SCR_4B => 0x0D2D
; 0x2773 => S_TIGHTER PO_SEARCH => 0x0C41
; 0x2788 => S_NOT_AND PO_SPACE => 0x0AD0
; 0x2790 => S_NEXT PO_ST_E => 0x0AF0
; 0x2795 => tbl_of_ops PO_ST_PR => 0x0AFC
; 0x27B0 => tbl_priors PO_STEP => 0x0C44
; 0x27BD => S_FN_SBRN PO_STORE => 0x0ADC
; 0x27D0 => SF_BRKT_1 PO_T => 0x0B5F
; 0x27D9 => SF_ARGMTS PO_T_UDG => 0x0B52
; 0x27E4 => SF_BRKT_2 PO_TAB => 0x0AC2
; 0x27E6 => SF_RPRT_C PO_TABLE => 0x0C14
; 0x27E9 => SF_FLAG_6 PO_TOKENS => 0x0C10
; 0x27F4 => SF_SYN_EN PO_TR_SP => 0x0C35
; 0x27F7 => SF_RUN PO_TV_1 => 0x0A7D
; 0x2802 => SF_ARGMT1 PO_TV_2 => 0x0A6D
; 0x2808 => SF_FND_DF POINT_LP => 0x22D4
; 0x2812 => REPORT_P POINT_SUB => 0x22CB
; 0x2814 => SF_CP_DEF POINTERS => 0x1664
; 0x2825 => SF_NOT_FD POKE => 0x1E80
; 0x2831 => SF_VALUES PPC => 0x5C45
; 0x2843 => SF_ARG_LP PR_ALL => 0x0B7F
; 0x2852 => SF_ARG_VL PR_ALL_1 => 0x0B93
; 0x2885 => SF_R_BR_2 PR_ALL_2 => 0x0BA4
; 0x288B => REPORT_Q PR_ALL_3 => 0x0BB6
; 0x288D => SF_VALUE PR_ALL_4 => 0x0BB7
; 0x28AB => FN_SKPOVR PR_ALL_5 => 0x0BC1
; 0x28B2 => LOOK_VARS PR_ALL_6 => 0x0BD3
; 0x28D4 => V_CHAR PR_AT_TAB => 0x201E
; 0x28DE => V_STR_VAR PR_CC => 0x5C80
; 0x28E3 => V_TEST_FN PR_END_Z => 0x2045
; 0x28EF => V_RUN_SYN PR_ITEM_1 => 0x1FFC
; 0x28FD => V_RUN PR_ITEM_2 => 0x200E
; 0x2900 => V_EACH PR_ITEM_3 => 0x2024
; 0x2912 => V_MATCHES PR_POSN_1 => 0x204E
; 0x2913 => V_SPACES PR_POSN_2 => 0x2061
; 0x2929 => V_GET_PTR PR_POSN_3 => 0x2067
; 0x292A => V_NEXT PR_POSN_4 => 0x206E
; 0x2932 => V_80_BYTE PR_ST_END => 0x2048
; 0x2934 => V_SYNTAX PR_STRING => 0x203C
; 0x293E => V_FOUND_1 PRB_BYTES => 0x0EE7
; 0x293F => V_FOUND_2 PREP_ADD => 0x2F9B
; 0x2943 => V_PASS PREP_M_D => 0x30C0
; 0x294B => V_END PRINT => 0x1FCD
; 0x2951 => STK_F_ARG PRINT_1 => 0x1FCF
; 0x295A => SFA_LOOP PRINT_2 => 0x1FDF
; 0x296B => SFA_CP_VR PRINT_3 => 0x1FE5
; 0x2981 => SFA_MATCH PRINT_4 => 0x1FF2
; 0x2991 => SFA_END PRINT_A => 0x0010
; 0x2996 => STK_VAR PRINT_A_2 => 0x15F2
; 0x29A1 => SV_SIMPLE_ PRINT_CR => 0x1FF5
; 0x29AE => SV_ARRAYS PRINT_FP => 0x2DE3
; 0x29C0 => SV_PTR PRINT_OUT => 0x09F4
; 0x29C3 => SV_COMMA PROG => 0x5C53
; 0x29D8 => SV_CLOSE PTR_DONE => 0x167F
; 0x29E0 => SV_CH_ADD PTR_NEXT => 0x166B
; 0x29E7 => SV_COUNT R_I_STORE => 0x365F
; 0x29EA => SV_LOOP ram_check => 0x11DA
; 0x29FB => SV_MULT RAM_DONE => 0x11EF
; 0x2A12 => SV_RPT_C RAM_FILL => 0x11DC
; 0x2A20 => REPORT_3 RAM_READ => 0x11E2
; 0x2A22 => SV_NUMBER RAM_SET => 0x1219
; 0x2A2C => SV_ELEM_ RAMTOP => 0x5CB2
; 0x2A45 => SV_SLICE RAND_1 => 0x1E5A
; 0x2A48 => SV_DIM RANDOMIZE => 0x1E4F
; 0x2A49 => SV_SLICE_ RASP => 0x5C38
; 0x2A52 => SLICING RE_ENTRY => 0x3365
; 0x2A7A => SL_RPT_C RE_ST_TWO => 0x3293
; 0x2A81 => SL_SECOND re_stack => 0x3297
; 0x2A94 => SL_DEFINE READ => 0x1DED
; 0x2AA8 => SL_OVER READ_1 => 0x1E0A
; 0x2AAD => SL_STORE READ_2 => 0x1E1E
; 0x2AB1 => STK_ST_0 READ_3 => 0x1DEC
; 0x2AB2 => STK_STO__ read_in => 0x3645
; 0x2AB6 => STK_STORE REC_EDIT => 0x16D4
; 0x2ACC => INT_EXP1 RECLAIM_1 => 0x19E5
; 0x2ACD => INT_EXP2 RECLAIM_2 => 0x19E8
; 0x2AE8 => I_CARRY REM => 0x1BB2
; 0x2AEB => I_RESTORE REMOVE_FP => 0x11A7
; 0x2AEE => DE__DE_1_ REPDEL => 0x5C09
; 0x2AF4 => GET_HL_DE REPORT_0 => 0x1BB0
; 0x2AFF => LET REPORT_1 => 0x1DD8
; 0x2B0B => L_EACH_CH REPORT_2 => 0x1C2E
; 0x2B0C => L_NO_SP REPORT_2a => 0x0670
; 0x2B1F => L_TEST_CH REPORT_3 => 0x2A20
; 0x2B29 => L_SPACES REPORT_4 => 0x1F15
; 0x2B3E => L_CHAR REPORT_5 => 0x0C86
; 0x2B4F => L_SINGLE REPORT_6 => 0x31AD
; 0x2B59 => L_NUMERIC REPORT_6b => 0x3703
; 0x2B66 => L_EXISTS REPORT_7 => 0x1F36
; 0x2B72 => L_DELETE_ REPORT_8 => 0x15E4
; 0x2B9B => L_LENGTH REPORT_A => 0x34E7
; 0x2BA3 => L_IN_W_S REPORT_Ab => 0x371A
; 0x2BA6 => L_ENTER REPORT_B => 0x046C
; 0x2BAF => L_ADD_ REPORT_Bb => 0x1E9F
; 0x2BC0 => L_NEW_ REPORT_Bc => 0x24F9
; 0x2BC6 => L_STRING REPORT_Bd => 0x35DC
; 0x2BEA => L_FIRST REPORT_C => 0x1C8A
; 0x2BF1 => STK_FETCH REPORT_Cb => 0x21CE
; 0x2C02 => DIM REPORT_D => 0x0D00
; 0x2C05 => D_RPORT_C REPORT_Da => 0x0552
; 0x2C15 => D_RUN REPORT_Dc => 0x0F0A
; 0x2C1F => D_LETTER REPORT_E => 0x1E08
; 0x2C2D => D_SIZE REPORT_Fa => 0x0642
; 0x2C2E => D_NO_LOOP REPORT_Fb => 0x1765
; 0x2C7C => DIM_CLEAR REPORT_G => 0x1555
; 0x2C7F => DIM_SIZES REPORT_H => 0x21D4
; 0x2C88 => ALPHANUM REPORT_I => 0x1D84
; 0x2C8D => ALPHA REPORT_J => 0x15C4
; 0x2C9B => DEC_TO_FP REPORT_K => 0x2244
; 0x2CA2 => BIN_DIGIT REPORT_L => 0x1B7B
; 0x2CB3 => BIN_END REPORT_M => 0x1EDA
; 0x2CB8 => NOT_BIN REPORT_N => 0x1BEC
; 0x2CCB => DECIMAL REPORT_Oa => 0x160E
; 0x2CCF => DEC_RPT_C REPORT_Ob => 0x1725
; 0x2CD5 => DEC_STO_1 REPORT_P => 0x2812
; 0x2CDA => NXT_DGT_1 REPORT_Q => 0x288B
; 0x2CEB => E_FORMAT REPORT_R => 0x0806
; 0x2CF2 => SIGN_FLAG REPPER => 0x5C0A
; 0x2CFE => SIGN_DONE RESERVE => 0x169E
; 0x2CFF => ST_E_PART RESET => 0x0066
; 0x2D18 => E_FP_JUMP REST_RUN => 0x1E45
; 0x2D1B => NUMERIC RESTK_SUB => 0x3296
; 0x2D22 => STK_DIGIT RESTORE => 0x1E42
; 0x2D28 => STACK_A RESULT_OK => 0x370C
; 0x2D2B => STACK_BC RETURN => 0x1F23
; 0x2D3B => INT_TO_FP ROM_TRAP => 0x1708
; 0x2D40 => NXT_DGT_2 rpt_mesgs => 0x1391
; 0x2D4F => E_TO_FP RS_NRMLSE => 0x32B1
; 0x2D55 => E_SAVE RS_STORE => 0x32BD
; 0x2D60 => E_LOOP RSLT_ZERO => 0x370E
; 0x2D6D => E_DIVSN RSTK_LOOP => 0x32B2
; 0x2D6E => E_FETCH RUN => 0x1EA1
; 0x2D71 => E_TST_END S_2_COORD => 0x2522
; 0x2D7B => E_END S_ALPHNUM => 0x2684
; 0x2D7F => INT_FETCH S_ATTR => 0x2672
; 0x2D8C => p_int_sto S_ATTR_S => 0x2580
; 0x2D8E => INT_STORE S_BRACKET => 0x25E8
; 0x2DA2 => FP_TO_BC S_CONT_1 => 0x26DD
; 0x2DAD => FP_DELETE S_CONT_2 => 0x2712
; 0x2DC1 => LOG_2_A_ S_CONT_3 => 0x2713
; 0x2DD5 => FP_TO_A S_DECIMAL => 0x268D
; 0x2DE1 => FP_A_END S_FN => 0x25F5
; 0x2DE3 => PRINT_FP S_FN_SBRN => 0x27BD
; 0x2DF2 => PF_NEGTVE S_IK__STK => 0x2660
; 0x2DF8 => PF_POSTVE S_INK__EN => 0x2665
; 0x2E01 => PF_LOOP S_INKEY_ => 0x2634
; 0x2E1E => PF_SAVE S_LETTER => 0x26C9
; 0x2E24 => PF_SMALL S_LOOP => 0x2734
; 0x2E25 => L2E25 S_LOOP_1 => 0x24FF
; 0x2E56 => PF_LARGE S_LOOPEND => 0x2770
; 0x2E6F => PF_MEDIUM S_NEGATE => 0x26DF
; 0x2E7B => PF_BITS S_NEXT => 0x2790
; 0x2E8A => PF_BYTES S_NO_TO__ => 0x2707
; 0x2EA1 => PF_DIGITS S_NOT_AND => 0x2788
; 0x2EA9 => PF_INSERT S_NUMERIC => 0x26C3
; 0x2EB3 => PF_TEST_2 S_OPERTR => 0x2723
; 0x2EB8 => PF_ALL_9 S_PI => 0x2627
; 0x2ECB => PF_MORE S_PI_END => 0x2630
; 0x2ECF => PF_FRACTN S_POINT => 0x267B
; 0x2EDF => PF_FRN_LP S_POSN => 0x5C88
; 0x2EEC => PF_FR_DGT S_POSN_hi => 0x5C89
; 0x2EEF => PF_FR_EXX S_PUSH_PO => 0x270D
; 0x2F0C => PF_ROUND S_Q_AGAIN => 0x25BE
; 0x2F18 => PF_RND_LP S_Q_COPY => 0x25CB
; 0x2F25 => PF_R_BACK S_Q_PRMS => 0x25D9
; 0x2F2D => PF_COUNT S_QUOTE => 0x25B3
; 0x2F46 => PF_NOT_E S_QUOTE_S => 0x250F
; 0x2F4A => PF_E_SBRN S_RND => 0x25F8
; 0x2F52 => PF_OUT_LP S_RND_END => 0x2625
; 0x2F59 => PF_OUT_DT S_RPORT_C => 0x252D
; 0x2F5E => PF_DC_OUT S_RPORT_C2 => 0x2761
; 0x2F64 => PF_DEC_0S S_RUNTEST => 0x2764
; 0x2F6C => PF_E_FRMT S_SC_MTCH => 0x255A
; 0x2F83 => PF_E_POS S_SC_ROWS => 0x255D
; 0x2F85 => PF_E_SIGN S_SCR_NXT => 0x2573
; 0x2F8B => CA_10_A_C S_SCR_STO => 0x257D
; 0x2F9B => PREP_ADD S_SCREEN_ => 0x2668
; 0x2FAF => NEG_BYTE S_SCRN__S => 0x2535
; 0x2FBA => FETCH_TWO S_SCRN_LP => 0x254F
; 0x2FDD => SHIFT_FP S_SD_SKIP => 0x26B6
; 0x2FE5 => ONE_SHIFT S_STK_DEC => 0x26B5
; 0x2FF9 => ADDEND_0 S_STK_LST => 0x274C
; 0x2FFB => ZEROS_4_5 S_STRING => 0x25DB
; 0x3004 => ADD_BACK S_SYNTEST => 0x275B
; 0x300D => ALL_ADDED S_TIGHTER => 0x2773
; 0x300F => subtract S_TOP => 0x5C6C
; 0x3014 => addition S_U_PLUS => 0x25AF
; 0x303C => ADDN_OFLW SA_1_SEC => 0x0991
; 0x303E => FULL_ADDN SA_8_BITS => 0x0525
; 0x3055 => SHIFT_LEN SA_ALL => 0x075A
; 0x307C => TEST_NEG SA_BIT_1 => 0x0514
; 0x309F => ADD_REP_6 SA_BIT_2 => 0x0511
; 0x30A3 => END_COMPL SA_BLANK => 0x0629
; 0x30A5 => GO_NC_MLT SA_BYTES => 0x04C2
; 0x30A9 => HL_HL_DE SA_CODE => 0x06C3
; 0x30B1 => HL_LOOP SA_CODE_1 => 0x06E1
; 0x30BC => HL_AGAIN SA_CODE_2 => 0x06F0
; 0x30BE => HL_END SA_CODE_3 => 0x06F5
; 0x30C0 => PREP_M_D SA_CODE_4 => 0x06F9
; 0x30CA => multiply SA_CONTRL => 0x0970
; 0x30EA => MULT_RSLT SA_DATA => 0x0652
; 0x30EF => MULT_OFLW SA_DATA_1 => 0x0692
; 0x30F0 => MULT_LONG SA_DELAY => 0x053C
; 0x3114 => MLT_LOOP SA_FLAG => 0x04D0
; 0x311B => NO_ADD SA_LD_END => 0x0554
; 0x3125 => STRT_MLT SA_LD_RET => 0x053F
; 0x313B => MAKE_EXPT SA_LEADER => 0x04D8
; 0x313D => DIVN_EXPT SA_LINE => 0x0716
; 0x3146 => OFLW1_CLR SA_LINE_1 => 0x0723
; 0x3151 => OFLW2_CLR SA_LOOP => 0x04FE
; 0x3155 => TEST_NORM SA_LOOP_P => 0x0505
; 0x3159 => NEAR_ZERO SA_NAME => 0x064B
; 0x315D => ZERO_RSLT SA_NULL => 0x0644
; 0x315E => SKIP_ZERO SA_OUT => 0x051C
; 0x316C => NORMALISE SA_PARITY => 0x050E
; 0x316E => SHIFT_ONE SA_SCR_ => 0x06A0
; 0x3186 => NORML_NOW SA_SET => 0x051A
; 0x3195 => OFLOW_CLR SA_SPACE => 0x0621
; 0x31AD => REPORT_6 SA_START => 0x0507
; 0x31AF => division SA_SYNC_1 => 0x04EA
; 0x31D2 => DIV_LOOP SA_SYNC_2 => 0x04F2
; 0x31DB => div_34th SA_TYPE_0 => 0x073A
; 0x31E2 => DIV_START SA_TYPE_3 => 0x0710
; 0x31F2 => SUBN_ONLY SA_V_NEW => 0x0685
; 0x31F9 => NO_RSTORE SA_V_OLD => 0x0672
; 0x31FA => COUNT_ONE SA_V_TYPE => 0x068F
; 0x3214 => truncate SAVE_ETC => 0x0605
; 0x3221 => T_GR_ZERO SCAN_ENT => 0x336C
; 0x3233 => T_FIRST scan_func => 0x2596
; 0x323F => T_SMALL SCAN_LOOP => 0x1B52
; 0x3252 => T_NUMERIC SCANNING => 0x24FB
; 0x325E => T_TEST SCR_CT => 0x5C8C
; 0x3261 => T_SHIFT scrl_mssg => 0x0CF8
; 0x3267 => T_STORE SEC_PLUS => 0x3575
; 0x326C => T_EXPNENT SECND_LOW => 0x356B
; 0x326D => X_LARGE SEED => 0x5C76
; 0x3272 => NIL_BYTES semi_tone => 0x046E
; 0x327E => BYTE_ZERO SEPARATOR => 0x1B6F
; 0x3283 => BITS_ZERO series_xx => 0x3449
; 0x328A => LESS_MASK SET_DE => 0x1195
; 0x3290 => IX_END SET_HL => 0x1190
; 0x3293 => RE_ST_TWO SET_MIN => 0x16B0
; 0x3296 => RESTK_SUB SET_STK => 0x16C5
; 0x3297 => re_stack SET_WORK => 0x16BF
; 0x32B1 => RS_NRMLSE SF_ARG_LP => 0x2843
; 0x32B2 => RSTK_LOOP SF_ARG_VL => 0x2852
; 0x32BD => RS_STORE SF_ARGMT1 => 0x2802
; 0x32C5 => stk_zero SF_ARGMTS => 0x27D9
; 0x32C8 => stk_one SF_BRKT_1 => 0x27D0
; 0x32CC => stk_half SF_BRKT_2 => 0x27E4
; 0x32CE => stk_pi_2 SF_CP_DEF => 0x2814
; 0x32D3 => stk_ten SF_FLAG_6 => 0x27E9
; 0x32D7 => tbl_addrs SF_FND_DF => 0x2808
; 0x335B => CALCULATE SF_NOT_FD => 0x2825
; 0x335E => GEN_ENT_1 SF_R_BR_2 => 0x2885
; 0x3362 => GEN_ENT_2 SF_RPRT_C => 0x27E6
; 0x3365 => RE_ENTRY SF_RUN => 0x27F7
; 0x336C => SCAN_ENT SF_SYN_EN => 0x27F4
; 0x3380 => FIRST_3D SF_VALUE => 0x288D
; 0x338C => DOUBLE_A SF_VALUES => 0x2831
; 0x338E => ENT_TABLE SFA_CP_VR => 0x296B
; 0x33A1 => delete SFA_END => 0x2991
; 0x33A2 => fp_calc_2 SFA_LOOP => 0x295A
; 0x33A9 => TEST_5_SP SFA_MATCH => 0x2981
; 0x33B4 => STACK_NUM sgn => 0x3492
; 0x33C0 => MOVE_FP SHIFT_FP => 0x2FDD
; 0x33C6 => stk_data SHIFT_LEN => 0x3055
; 0x33C8 => STK_CONST SHIFT_ONE => 0x316E
; 0x33DE => FORM_EXP SIGN_DONE => 0x2CFE
; 0x33F1 => STK_ZEROS SIGN_FLAG => 0x2CF2
; 0x33F7 => SKIP_CONS SIGN_TO_C => 0x3507
; 0x33F8 => SKIP_NEXT sin => 0x37B5
; 0x3406 => LOC_MEM SKIP_CONS => 0x33F7
; 0x340F => get_mem_xx SKIP_NEXT => 0x33F8
; 0x341B => stk_const_xx SKIP_OVER => 0x007D
; 0x342D => st_mem_xx SKIP_ZERO => 0x315E
; 0x343C => exchange SKIPS => 0x0090
; 0x343E => SWAP_BYTE SL_DEFINE => 0x2A94
; 0x3449 => series_xx SL_OVER => 0x2AA8
; 0x346A => abs SL_RPT_C => 0x2A7A
; 0x346E => negate SL_SECOND => 0x2A81
; 0x3474 => NEG_TEST SL_STORE => 0x2AAD
; 0x3483 => INT_CASE SLICING => 0x2A52
; 0x3492 => sgn SMALL => 0x37F8
; 0x34A5 => in_func spare => 0x386E
; 0x34AC => peek SPOSNL => 0x5C8A
; 0x34B0 => IN_PK_STK sqr => 0x384A
; 0x34B3 => usr_no ST_E_PART => 0x2CFF
; 0x34BC => usr__ st_mem_xx => 0x342D
; 0x34D3 => USR_RANGE STACK_A => 0x2D28
; 0x34E4 => USR_STACK STACK_BC => 0x2D2B
; 0x34E7 => REPORT_A STACK_NUM => 0x33B4
; 0x34E9 => TEST_ZERO START => 0x0000
; 0x34F9 => greater_0 START_NEW => 0x11CB
; 0x3501 => not STK_CODE => 0x3671
; 0x3506 => less_0 STK_CONST => 0x33C8
; 0x3507 => SIGN_TO_C stk_const_xx => 0x341B
; 0x350B => FP_0_1 stk_data => 0x33C6
; 0x351B => or_func STK_DIGIT => 0x2D22
; 0x3524 => no___no STK_F_ARG => 0x2951
; 0x352D => str___no STK_FETCH => 0x2BF1
; 0x353B => no_l_eql_etc_ stk_half => 0x32CC
; 0x3543 => EX_OR_NOT stk_one => 0x32C8
; 0x354E => NU_OR_STR stk_pi_2 => 0x32CE
; 0x3559 => STRINGS STK_PNTRS => 0x35BF
; 0x3564 => BYTE_COMP STK_ST_0 => 0x2AB1
; 0x356B => SECND_LOW STK_STO__ => 0x2AB2
; 0x3572 => BOTH_NULL STK_STORE => 0x2AB6
; 0x3575 => SEC_PLUS stk_ten => 0x32D3
; 0x3585 => FRST_LESS STK_TO_A => 0x2314
; 0x3588 => STR_TEST STK_TO_BC => 0x2307
; 0x358C => END_TESTS STK_VAR => 0x2996
; 0x359C => strs_add stk_zero => 0x32C5
; 0x35B7 => OTHER_STR STK_ZEROS => 0x33F1
; 0x35BF => STK_PNTRS STKBOT => 0x5C63
; 0x35C9 => chrs STKEND => 0x5C65
; 0x35DC => REPORT_Bd STMT_L_1 => 0x1B29
; 0x35DE => val_ STMT_LOOP => 0x1B28
; 0x360C => V_RPORT_C STMT_NEXT => 0x1BF4
; 0x361F => str_ STMT_R_1 => 0x1B7D
; 0x3645 => read_in STMT_RET => 0x1B76
; 0x365F => R_I_STORE STOP_BAS => 0x1CEE
; 0x3669 => code str_ => 0x361F
; 0x3671 => STK_CODE str___no => 0x352D
; 0x3674 => len STR_ALTER => 0x2070
; 0x367A => dec_jr_nz STR_DATA => 0x171E
; 0x3686 => JUMP STR_DATA1 => 0x1727
; 0x3687 => JUMP_2 STR_TEST => 0x3588
; 0x368F => jump_true STRINGS => 0x3559
; 0x369B => end_calc STRLEN => 0x5C72
; 0x36A0 => n_mod_m STRMS => 0x5C10
; 0x36AF => int strs_add => 0x359C
; 0x36B7 => X_NEG STRT_MLT => 0x3125
; 0x36C2 => EXIT SUBN_ONLY => 0x31F2
; 0x36C4 => exp SUBPPC => 0x5C47
; 0x3703 => REPORT_6b subtract => 0x300F
; 0x3705 => N_NEGTV SV_ARRAYS => 0x29AE
; 0x370C => RESULT_OK SV_CH_ADD => 0x29E0
; 0x370E => RSLT_ZERO SV_CLOSE => 0x29D8
; 0x3713 => ln SV_COMMA => 0x29C3
; 0x371A => REPORT_Ab SV_COUNT => 0x29E7
; 0x371C => VALID SV_DIM => 0x2A48
; 0x373D => GRE_8 SV_ELEM_ => 0x2A2C
; 0x3783 => get_argt SV_LOOP => 0x29EA
; 0x37A1 => ZPLUS SV_MULT => 0x29FB
; 0x37A8 => YNEG SV_NUMBER => 0x2A22
; 0x37AA => cos SV_PTR => 0x29C0
; 0x37B5 => sin SV_RPT_C => 0x2A12
; 0x37B7 => C_ENT SV_SIMPLE_ => 0x29A1
; 0x37DA => tan SV_SLICE => 0x2A45
; 0x37E2 => atn SV_SLICE_ => 0x2A49
; 0x37F8 => SMALL SWAP_BYTE => 0x343E
; 0x37FA => CASES SYM_CODES => 0x026A
; 0x3833 => asn SYNTAX_Z => 0x2530
; 0x3843 => acs T_ADDR => 0x5C74
; 0x384A => sqr T_EXPNENT => 0x326C
; 0x3851 => to_power T_FIRST => 0x3233
; 0x385D => XIS0 T_GR_ZERO => 0x3221
; 0x386A => ONE T_NUMERIC => 0x3252
; 0x386C => LAST T_SHIFT => 0x3261
; 0x386E => spare T_SMALL => 0x323F
; 0x3D00 => char_set T_STORE => 0x3267
; 0x5C00 => KSTATE T_TEST => 0x325E
; 0x5C01 => KSTATE1 tan => 0x37DA
; 0x5C02 => KSTATE2 tape_msgs => 0x09A1
; 0x5C03 => KSTATE3 tape_msgs_2 => 0x09C1
; 0x5C04 => KSTATE4 tbl_addrs => 0x32D7
; 0x5C05 => KSTATE5 tbl_of_ops => 0x2795
; 0x5C06 => KSTATE6 tbl_priors => 0x27B0
; 0x5C07 => KSTATE7 TEMP_PTR1 => 0x0077
; 0x5C08 => LAST_K TEMP_PTR2 => 0x0078
; 0x5C09 => REPDEL TEMPS => 0x0D4D
; 0x5C0A => REPPER TEMPS_1 => 0x0D5B
; 0x5C0B => DEFADD TEMPS_2 => 0x0D65
; 0x5C0D => K_DATA TEST_5_SP => 0x33A9
; 0x5C0E => TVDATA TEST_CHAR => 0x001C
; 0x5C10 => STRMS TEST_NEG => 0x307C
; 0x5C36 => CHARS TEST_NORM => 0x3155
; 0x5C38 => RASP TEST_ROOM => 0x1F05
; 0x5C39 => PIP TEST_ZERO => 0x34E9
; 0x5C3A => ERR_NR TKN_TABLE => 0x0095
; 0x5C3B => FLAGS to_power => 0x3851
; 0x5C3C => TV_FLAG truncate => 0x3214
; 0x5C3D => ERR_SP TV_FLAG => 0x5C3C
; 0x5C3F => LIST_SP TVDATA => 0x5C0E
; 0x5C41 => MODE TWO_P_1 => 0x1E8E
; 0x5C42 => NEWPPC TWO_PARAM => 0x1E85
; 0x5C44 => NSPPC UDG => 0x5C7B
; 0x5C45 => PPC UNSTACK_Z => 0x1FC3
; 0x5C47 => SUBPPC USE_252 => 0x2495
; 0x5C48 => BORDCR USE_ZERO => 0x1CE6
; 0x5C49 => E_PPC usr__ => 0x34BC
; 0x5C4B => VARS usr_no => 0x34B3
; 0x5C4D => DEST USR_RANGE => 0x34D3
; 0x5C4F => CHANS USR_STACK => 0x34E4
; 0x5C51 => CURCHL V_80_BYTE => 0x2932
; 0x5C53 => PROG V_CHAR => 0x28D4
; 0x5C55 => NXTLIN V_EACH => 0x2900
; 0x5C57 => DATADD V_END => 0x294B
; 0x5C59 => E_LINE V_FOUND_1 => 0x293E
; 0x5C5B => K_CUR V_FOUND_2 => 0x293F
; 0x5C5D => CH_ADD V_GET_PTR => 0x2929
; 0x5C5F => X_PTR V_MATCHES => 0x2912
; 0x5C61 => WORKSP V_NEXT => 0x292A
; 0x5C63 => STKBOT V_PASS => 0x2943
; 0x5C65 => STKEND V_RPORT_C => 0x360C
; 0x5C67 => BREG V_RUN => 0x28FD
; 0x5C68 => MEM V_RUN_SYN => 0x28EF
; 0x5C6A => FLAGS2 V_SPACES => 0x2913
; 0x5C6B => DF_SZ V_STR_VAR => 0x28DE
; 0x5C6C => S_TOP V_SYNTAX => 0x2934
; 0x5C6E => OLDPPC V_TEST_FN => 0x28E3
; 0x5C70 => OSPCC val_ => 0x35DE
; 0x5C71 => FLAGX VAL_FET_1 => 0x1C56
; 0x5C72 => STRLEN VAL_FET_2 => 0x1C59
; 0x5C74 => T_ADDR VALID => 0x371C
; 0x5C76 => SEED VAR_A_1 => 0x1C22
; 0x5C78 => FRAMES VAR_A_2 => 0x1C30
; 0x5C7A => FRAMES3 VAR_A_3 => 0x1C46
; 0x5C7B => UDG VARS => 0x5C4B
; 0x5C7D => COORDS VR_CONT_1 => 0x07E9
; 0x5C7E => COORDS_hi VR_CONT_2 => 0x07F4
; 0x5C7F => P_POSN VR_CONT_3 => 0x0800
; 0x5C80 => PR_CC VR_CONTRL => 0x07CB
; 0x5C82 => ECHO_E WAIT_KEY => 0x15D4
; 0x5C84 => DF_CC WAIT_KEY1 => 0x15DE
; 0x5C86 => DFCCL WORKSP => 0x5C61
; 0x5C88 => S_POSN X007B => 0x007B
; 0x5C89 => S_POSN_hi X08CE => 0x08CE
; 0x5C8A => SPOSNL X0F85 => 0x0F85
; 0x5C8C => SCR_CT X1349 => 0x1349
; 0x5C8D => ATTR_P X_LARGE => 0x326D
; 0x5C8E => MASK_P X_NEG => 0x36B7
; 0x5C8F => ATTR_T X_PTR => 0x5C5F
; 0x5C90 => MASK_T XIS0 => 0x385D
; 0x5C91 => P_FLAG YNEG => 0x37A8
; 0x5C92 => MEMBOT ZERO_RSLT => 0x315D
; 0x5CB0 => NMIADD ZEROS_4_5 => 0x2FFB
; 0x5CB2 => RAMTOP ZPLUS => 0x37A1
; 0x5CB4 => P_RAMT zx81_name => 0x04AA