#
# Copyright 2000 - 2012 file.data@rfi.net
#
package File::Data;
use strict;
use Carp;
use Data::Dumper;
use Fcntl qw(:flock);
use FileHandle;
# use Tie::File; # <- todo
# use File::stat;
use vars qw(@ISA $VERSION $AUTOLOAD);
$VERSION = do { my @r = (q$Revision: 1.16 $ =~ /\d+/g); sprintf "%d."."%02d" x $#r, @r };
$| = 1;
=head1 NAME
File::Data - interface to file data
=head1 DESCRIPTION
Wraps all the accessing of a file into a convenient set of calls for
reading and writing data, including a simple regex interface.
Note that the file needs to exist prior to using this module!
See L<new()>
=head1 SYNOPSIS
=over 4
use strict;
use File::Data;
my $o_dat = File::Data->new('./t/example');
$o_dat->write("complete file contents\n");
$o_dat->prepend("first line\n"); # line 0
$o_dat->append("original second (last) line\n");
$o_dat->insert(2, "new second line\n"); # inc. zero!
$o_dat->replace('line', 'LINE');
print $o_dat->READ;
Or, perhaps more seriously :-}
my $o_sgm = File::Data->new('./sgmlfile');
print "new SGML data: ".$o_sgm->REPLACE(
'\<\s*((?i)tag)\s*\>\s*((?s).*)\s*\<\s*((?i)\s*\/\s*tag)\s*\>',
qq|<tag>key="val"</tag>|,
) if $o_sgm;
See L<METHODS> and L<EXAMPLES>.
=head1 IMPORTANT
lowercase method calls return the object itself, so you can chain calls.
my $o_obj = $o_dat->read; # ! <= object !
UPPERCASE method calls return the data relevant to the operation.
my @data = $o_dat->READ; # ! <= data !
While this may occasionally be frustrating, using the B<principle of
least surprise>, it is at least consistent.
See L<do>
=head1 EXPLANATION
=over 4
The idea is to standardise accessing of files for repetitive and straight
forward tasks, and remove the repeated and therefore error prone file
access I have seen in many sites, where varying, (with equivalently
varying success), methods are used to achieve essentially the same result
- a simple search and replace and/or a regex match.
Approaches to opening and working with files vary so much, where
one person may wish to know if a file exists, another wishes to know
whether the target is a file, or if it is readable, or writable and so on.
Sometimes, in production code even (horror), file's are opened without any
checks of whether the open was succesful. Then there's a loop through
each line to find the first or many patterns to read and/or replace.
With a failure, normally the only message is 'permission denied', is
that read or write access, does the file even exist? etc.
This module attempts to provide a plain/generic interface to accessing
a file's data. This will not suit every situation, but I have included
some examples which will hopefully demonstrate that it may be used
in situations where people would normally go through varying and
inconsistent, (and therefore error-prone), procedures - to get at the
same data.
Theoretically you can mix and match your read and writes so long as you
don't open read-only.
my $o_dat = File::Data->new($file);
my $i_snrd = $o_dat->append($append)->REPLACE($search, $replace);
print $o_dat->READ;
One last thing - I'm sure this could be made more efficient, and I'd be
receptive to any suggestions to that effect. Note though that the intention
has been to create a simple and consistent interface, rather than a complicated
one.
=back
=cut
# Methods we like:
# ================================================================
#
my @_METHODS = qw(append insert prepend read replace return search write);
my $_METHODS = join('|', @_METHODS);
=head1 METHODS
=over 4
=item new
Create a new File::Data object (default read-write).
my $o_rw = File::Data->new($filename); # read-write
my $o_ro = File::Data->new($filename, 'ro'); # read-only
Each file should have it's own discrete object.
Note that if you open a file read-only and then attempt to write to it,
that will be regarded as an error, even if you change the permissions
in the meantime.
Further: The file B<must> exist before succesful use of this method
is possible. This is B<not> a replacement for modules which create and
delete files, this is purely designed as an interface to the B<data>
of existing files. A B<create> function is a future possibility.
Look in L<EXAMPLES> for a more complete explanation of possible arguments
to the B<new()> method
=cut
sub new {
my $class = shift;
my $file = shift;
my $perms = shift || $File::Data::PERMISSIONS;
my $h_err = shift || {};
my $self = bless({
'_err' => {},
'_var' => {
'backup' => 0,
'limbo' => '',
'state' => 'init',
'writable' => 0,
},
}, $class);
$self->_debug("file($file), perm($perms), h_err($h_err)") if $File::Data::DEBUG;
my $i_ok = $self->_init($file, $perms, $h_err);
return $i_ok == 1 ? $self : undef;
}
=item read
Read all data from file
$o_dat = $o_dat->read; # !
my @data = $o_dat->READ;
=cut
sub READ {
my $self = shift;
$self->_enter('read');
$self->_debug('in: ') if $File::Data::DEBUG;
my @ret = $self->_read;
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('read');
return @ret;
};
=item _internal
read
does this...
=cut
sub _read { #
my $self = shift;
my $FH = $self->_fh;
$FH->seek(0, 0);
#
my @ret = <$FH>;
return ($File::Data::REFERENCE) ? \@ret : @ret;
};
=item write
Write data to file
my $o_dat = $o_dat->WRITE; # !
my @written = $o_dat->write;
=cut
sub WRITE {
my $self = shift;
my @args = @_;
my @ret = ();
$self->_enter('write');
$self->_debug('in: '.Dumper(\@args)) if $File::Data::DEBUG;
if ($self->_writable) {
my $FH = $self->_fh;
$FH->truncate(0);
$FH->seek(0, 0);
@ret = $self->_write(@args);
}
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('write');
return ($File::Data::REFERENCE) ? \@ret : @ret;
};
sub _write { #
my $self = shift;
my @ret = ();
my $FH = $self->_fh;
my $pos = $FH->tell;
$self->_debug("writing at curpos: $pos") if $File::Data::DEBUG;
foreach (@_) {
push(@ret, $_) if print $FH $_;
$self->_debug("wrote -->$_<--") if $File::Data::DEBUG;
}
return ($File::Data::REFERENCE) ? \@ret : @ret;
};
=item prepend
Prepend to file
my $o_dat = $o_dat->prepen(\@lines); # !
my @prepended = $o_dat->prepend(\@lines);
=cut
sub PREPEND {
my $self = shift;
my @ret = ();
$self->_enter('prepend');
$self->_debug('in: '.Dumper(@_)) if $File::Data::DEBUG;
if ($self->_writable) {
my $FH = $self->_fh;
$FH->seek(0, 0);
my @data = <$FH>;
$FH->truncate(0);
$FH->seek(0, 0);
@ret = @_ if $self->_write(@_, @data);
}
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('prepend');
return ($File::Data::REFERENCE) ? \@ret : @ret;
};
=item insert
Insert data at line number, starting from '0'
my $o_dat = $o_dat->insert($i_lineno, \@lines); # !
my @inserted = $o_dat->INSERT($i_lineno, \@lines);
=cut
sub INSERT {
my $self = shift;
my $line = shift;
my @ret = ();
$self->_enter('insert');
$self->_debug('in: '.Dumper(\@_)) if $File::Data::DEBUG;
if ($line !~ /^\d+$/) {
$self->_error("can't go to non-numeric line($line)");
} else {
if ($self->_writable) {
my $FH = $self->_fh;
$FH->seek(0, 0);
my $i_cnt = -1;
my @pre = ();
my @post = ();
while (<$FH>) {
$i_cnt++; # 0..n
my $pos = $FH->tell;
if ($i_cnt < $line) {
push(@pre, $_);
} elsif ($i_cnt >= $line) {
push(@post, $_);
}
}
$i_cnt++;
if (!($i_cnt >= $line)) {
my $s = ($i_cnt == 1) ? '' : 's';
$self->_error("couldn't insert($line, ...) while only $i_cnt line$s in file");
} else {
$FH->truncate(0);
$FH->seek(0, 0);
@ret = @_ if $self->_write(@pre, @_, @post);
}
}
}
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('insert');
return ($File::Data::REFERENCE) ? \@ret : @ret;
}
=item append
Append to file
my $o_dat = $o_dat->append(\@lines); # !
my @appended = $o_dat->APPEND(\@lines);
=cut
sub APPEND {
my $self = shift;
my @ret = ();
$self->_enter('append');
$self->_debug('in: '.Dumper(\@_)) if $File::Data::DEBUG;
if ($self->_writable) {
my $FH = $self->_fh;
$FH->seek(0, 2);
@ret = @_ if $self->_write(@_);
}
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('append');
return ($File::Data::REFERENCE) ? \@ret : @ret;
};
=item search
Retrieve data out of a file, simple list of all matches found are returned.
Note - you must use capturing parentheses for this to work!
my $o_dat = $o_dat->search('/^(.*\@.*)$/'); # !
my @addrs = $o_dat->SEARCH('/^(.*\@.*)$/');
my @names = $o_dat->SEARCH('/^(?:[^:]:){4}([^:]+):/');
=cut
sub SEARCH {
my $self = shift;
my $search = shift;
my @ret = ();
$self->_enter('search');
$self->_debug("in: $search") if $File::Data::DEBUG;
if ($search !~ /.+/) {
$self->_error("no search($search) given");
} else {
my $file = $self->_var('filename');
my $FH = $self->_fh;
$FH->seek(0, 0);
my $i_cnt = 0;
if ($File::Data::STRING) { # default
my $orig = $/; $/ = undef; # slurp
my $data = <$FH>; $/ = $orig;
$self->_debug("looking at data($data)") if $File::Data::DEBUG;
@ret = ($data =~ /$search/g);
$i_cnt = ($data =~ tr/\n/\n/);
} else {
while (<$FH>) {
$self->_debug("looking at line($_)") if $File::Data::DEBUG;
my $line = $_;
push(@ret, ($line =~ /$search/));
$i_cnt++;
}
}
if (scalar(@ret) >= 1) {
$self->_debug("search($search) failed(@ret) in file($file) lines($i_cnt)");
}
}
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('search');
return ($File::Data::REFERENCE) ? \@ret : @ret;
}
=item replace
Replace data in a 'search and replace' manner, returns the final data.
my $o_dat = $o_dat->replace($search, $replace); # !
my @data = $o_dat->REPLACE($search, $replace);
my @data = $o_dat->REPLACE(
q|\<a href=(['"])([^$1]+)?$1| => q|'my.sales.com'|,
);
This is B<simple>, in that you can do almost anything in the B<search> side,
but the B<replace> side is a bit more restricted, as we can't effect the
replacement modifiers on the fly.
If you really need this, perhaps B<(?{})> can help?
=cut
sub REPLACE {
my $self = shift;
my %args = @_;
my @ret = ();
$self->_enter('replace');
$self->_debug('in: '.Dumper(\%args)) if $File::Data::DEBUG;
if ($self->_writable) {
my $file = $self->_var('filename');
my $FH = $self->_fh;
$FH->seek(0, 0);
my $i_cnt = 0;
SEARCH:
foreach my $search (keys %args) {
my $replace = $args{$search};
if ($File::Data::STRING) { # default
my $orig = $/; $/ = undef; # slurp
my $data = <$FH>; $/ = $orig;
$self->_debug("initial ($data)") if $File::Data::DEBUG;
if (($i_cnt = ($data =~ s/$search/$replace/g))) {
@ret = $data;
} else {
print "unable($i_cnt) to search($search) and replace($replace)\n";
}
} else {
while (<$FH>) {
$self->_debug("initial line($_)") if $File::Data::DEBUG;
my $line = $_;
if ($line =~ s/$search/$replace/) {
$i_cnt++;
}
push(@ret, $line);
}
}
if (scalar(@ret) >= 1) {
$FH->seek(0, 0);
$FH->truncate(0);
$FH->seek(0, 0);
@ret = $self->_write(@ret);
}
if (!($i_cnt >= 1)) {
$self->_debug("nonfulfilled search($search) and replace($replace) in file($file)");
}
}
}
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('replace');
return ($File::Data::REFERENCE) ? \@ret : @ret;
}
=item xreturn
Returns the product of the given (or last) B<do()>, undef on failure.
my $o_dat = $o_dat->prepend($A)->append($b)->return('prepend'); # !
my @prepended = $o_dat->prepend($A)->append($b)->RETURN('prepend');
my @appended = $o_dat->prepend($A)->append($b)->RETURN; # like read()
=cut
sub RETURN {
my $self = shift;
my $call = uc(shift) || $self->_var('last');
if ((defined($self->{'_var'}{$call}) &&
ref($self->{'_var'}{$call}) eq 'ARRAY'
)) {
return @{$self->_var($call)};
} else {
$self->_debug("not returning invalid call($call) ref($self->{'_var'}{$call})");
return undef;
}
}
=item create
placeholder - unsupported
=cut
sub create {
my $self = shift;
$self->_error("unsupported call: __FILE__(@_)");
return ();
}
=item delete
placeholder - unsupported
=cut
sub delete {
my $self = shift;
$self->_error("unsupported call: __FILE__(@_)");
return ();
}
=item close
Close the file
my $i_closed = $o_dat->close; # 1|0
=cut
sub close {
my $self = shift;
return $self->_close;
}
=item info
placeholder - unsupported
=cut
# Returns File::stat object for the file.
# print 'File size: '.$o_dat->stat->size;
sub xFSTAT {
my $self = shift;
my $file = shift || '_';
# print "file($file) stat: ".Dumper(stat($file));
# return stat($file);
return ();
}
sub xfstat {
my $self = shift;
my $file = shift || '_';
# print "file($file) stat: ".Dumper(stat($file));
# stat($file);
return ();
}
sub dummy {
my $self = shift;
my %args = @_;
my @ret = ();
$self->_enter('dummy');
$self->_debug('in: '.Dumper(\%args)) if $File::Data::DEBUG;
# if ($self->_writable) {
# rjsf
# $FH->seek(0, 2);
# }
$self->_debug('out: '.Dumper(\@ret)) if $File::Data::DEBUG;
$self->_leave('dummy');
return ($File::Data::REFERENCE) ? \@ret : @ret;
}
=back
=cut
# ================================================================
=head1 VARIABLES
Various variables may be set affecting the behaviour of the module.
=over 4
=item $File::Data::DEBUG
Set to 0 (default) or 1 for debugging information to be printed on STDOUT.
$File::Data::DEBUG = 1;
Alternatively set to a regex of any of the prime methods to debug them individually.
$File::Data::DEBUG = '(ap|pre)pend';
=cut
$File::Data::DEBUG ||= $ENV{'File_Data_DEBUG'} || 0;
# $File::Data::DEBUG = 1; # rjsf
=item $File::Data::FATAL
Will die if there is any failure in accessing the file, or reading the data.
Default = 0 (don't die - just warn);
$File::Data::FATAL = 1; # die
=cut
$File::Data::FATAL ||= $ENV{'File_Data_FATAL'} || 0;
=item $File::Data::REFERENCE
Will return a reference, not a list, useful with large files.
Default is 0, ie; methods normally returns a list.
Hopefully future versions of perl may return a reference if you request one,
but as this is not supported generically yet, nor do we, so we require the
variable to be set. There may be an argument to make this a reference by
default, feedback will decide.
$File::Data::REFERENCE = 1;
my $a_ref = $o_dat->search('.*');
print "The log: \n".@{ $a_ref };
=cut
$File::Data::REFERENCE ||= $ENV{'File_Data_REFERENCE'} || 0;
=item $File::Data::SILENT
Set to something other than zero if you don't want error messages ?-\
$File::Data::SILENT = 0; # per line
=cut
$File::Data::SILENT ||= $ENV{'File_Data_SILENT'} || 0;
=item $File::Data::STRING
Where regex's are used, default behaviour is to treate the entire file as a
single scalar string, so that, for example, B<(?ms:...)> matches are effective.
Unset if you don't want this behaviour.
$File::Data::STRING = 0; # per line
=cut
$File::Data::STRING ||= $ENV{'File_Data_STRING'} || 1;
=item $File::Data::PERMISSIONS
File will be opened read-write (B<insert()> compatible) unless this
variable is set explicitly or given via B<new()>. In either case,
unless it is one of our valid permission B<keys> declared below,
it will be passed on to B<FileHandle> and otherwise not modified.
We don't support fancy permission sets, just read or write.
Read-only permissions may be explicitly set using one of these B<keys>:
$File::Data::PERMISSIONS = 'ro'; # or readonly or <
Or, equivalently, for read-write (default):
$File::Data::PERMISSIONS = 'rw'; # or readwrite or +<
Note that it makes no sense to have an 'append only' command (>>),
we'd have to disable all of write, search and replace, and insert,
etc. in that case - just use the B<append()> method only.
This is a KISS-compatible module remember?
=cut
$File::Data::PERMISSIONS ||= $ENV{'File_Data_PERMISSIONS'} || '+<';
=back
# ================================================================
=head1 SPECIAL
...
=over 4
=item AUTOLOAD
Any unrecognised function will be passed to the FileHandle object for final
consideration, behaviour is then effectively 'o_dat ISA FileHandle'.
$o_dat->truncate;
=cut
sub AUTOLOAD {
my $self = shift;
return if $AUTOLOAD =~ /::DESTROY$/o; # protection
my $meth = $AUTOLOAD;
$meth =~ s/.+::([^:]+)$/$1/;
if ($meth =~ /^($_METHODS)$/io) { # convenience
$self->_debug("rerouting: $meth(@_)");
return $self->do(uc($meth), @_); # <-
# return $self->do(lc($meth), @_);
} else { # or fallback
my $FH = $self->_fh;
if ($FH->can($meth)) {
return $FH->$meth(@_); # <-
} else {
$DB::single=2; # rjsf
return $self->_error("no such method($meth)!"); # <-
}
}
}
=back
=cut
# ================================================================
=head1 EXAMPLES
Typical construction examples:
my $o_rw = File::Data->new($filename, 'rw');
my $o_ro = File::Data->new($filename, 'ro');
=over 4
=item complete
my $o_dat = File::Data->new('./jabber');
$o_dat->write(" Bewxre the Jabberwock my son,\n");
$o_dat->prepend("The Jxbberwock by Lewis Cxrroll:\n");
$o_dat->append(" the claws thxt snxtch,\n ...\n");
$o_dat->insert(2, " the jaws which bite.\n");
$o_dat->replace('x', 'a');
print $o_dat->SEARCH('The.+\n')->REPLACE("The.+\n", '')->return('search');
print $o_dat->READ;
=item error
Failure is indicated by an error routine being called, this will print
out any error to STDERR, unless warnings are declared fatal, in which
case we croak. You can register your own error handlers for any method
mentioned in the L<METHOD> section of this document, in addition is a
special B<init> call for initial file opening and general setting up.
Create a read-write object with a callback for all errors:
my $o_rw = File::Data->new($filename, 'ro', {
'error' => \&myerror,
});
Create a read-only object with a separate object handler for each error type:
my $o_rw = File::Data->new($filename, 'rw', {
'error' => $o_generic->error_handler,
'insert' => $o_handler->insert_error,
'open' => $o_open_handler,
'read' => \&carp,
'write' => \&write_error,
});
=item commandline
From the command line:
C<perl -MFile::Data -e "File::Data->new('./test.txt')->write('some stuff')">
And (very non-obfuscated)
C<
perl -MFile::Data -e "@x=sort qw(perl another hacker just);
print map {split(\"\n\", ucfirst(\$_).\" \")}\
File::Data->new(\"./t/japh\")->\
write(shift(@x).\"\n\")-> \
append(shift(@x).\"\n\")-> \
prepend(shift(@x).\"\n\")-> \
insert(2, shift(@x).\"\n\")->\
READ;"
>
If you still have problems, mail me the output of
make test TEST_VERBOSE=1
=back
=cut
# ================================================================
=head1 PRIVATE
=over 4
Private methods not expected to be called by anybody, and completely unsupported.
Expected to metamorphose regularly - do B<not> call these - you have been warned!
=item _var
Variable get/set method
my $get = $o_dat->_var($key); # get
my $set = $o_dat->_var($key, $val); # set
=cut
# @_METHODS, qw(append insert prepend read replace return search write);
my $_VARS = join('|', @_METHODS, qw(
backup error errors filename filehandle last limbo permissions state writable
));
sub _var {
my $self = shift;
my $key = shift;
my $val = shift;
my $ret = '';
# if (!(grep(/^_$key$/, keys %{$self{'_var'}}))) {
if ($key !~ /^($_VARS)$/io) {
$self->_error("No such key($key) val($val)!");
} else {
if (defined($val)) {
$self->{'_var'}{$key} = $val;
# {"$File::Data::$key"} = $val;
$self->_debug("set key($key) => val($val)");
}
$ret = $self->{'_var'}{$key};
}
return $ret;
}
=item _debug
Print given args on STDOUT
$o_dat->_debug($msg) if $File::Data::DEBUG;
=cut
sub _debug {
my $self = shift;
my $state = $self->{'_var'}{'state'}; # ahem
my $debug = $File::Data::DEBUG;
if (($debug =~ /^(\d+)$/o && $1 >= 1) ||
$debug =~ /^(.+)$/o && $state =~ /$debug/
) {
print ("$state: ", @_, "\n");
}
return ();
}
=item _vars
Return dumped env and object B<key> and B<values>
print $o_dat->_vars;
=cut
sub _vars {
my $self = shift;
my $h_ret = $self;
no strict 'refs';
foreach my $key (keys %{File::Data::}) {
next unless $key =~ /^[A-Z]+$/o;
next if $key =~ /^(BEGIN|EXPORT)/o;
my $var = "File::Data::$key";
$$h_ret{'_pck'}{$key} = $$var;
}
return Dumper($h_ret);
}
=item _err
Get/set error handling methods/objects
my $c_sub = $o_dat->_err('insert'); # or default
=cut
sub _err {
my $self = shift;
my $state = shift || $self->_var('state');
my $err = $self->{'_err'}{$state} || $self->{'_err'}{'default'};
return $err;
}
=item _error
By default prints error to STDERR, will B<croak> if B<File::Data::FATAL> set, returning ().
See L<EXAMPLES> for info on how to pass your own error handlers in.
=cut
sub _error {
my $self = shift;
my @err = @_;
my @ret = ();
my $state = $self->_var('state');
my $c_ref = $self->_err($state );
my $error = $self->_var('error');
unshift(@err, "$state ERROR: ");
my $ref = $self->_var('errors', join("\n", @err));
# $self->_debug($self->_vars) if $File::Data::DEBUG;
if (ref($c_ref) eq 'CODE') {
eval { @ret = &$c_ref(@err) };
if ($@) {
$File::Data::FATAL >= 1
? croak("$0 failed: $c_ref(@err)")
: carp("$0 failed: $c_ref(@err)")
;
}
} elsif (ref($c_ref) && $c_ref->can($state)) {
eval { @ret = $c_ref->$state(@err) };
if ($@) {
$File::Data::FATAL >= 1
? croak("$0 failed: $c_ref(@err)")
: carp("$0 failed: $c_ref(@err)")
;
}
} else {
unless ($File::Data::SILENT) {
($File::Data::FATAL >= 1) ? croak(@err) : carp(@err);
}
}
return (); #
}
=item _mapfile
Maps file
my $file = $o_dat->_mapfile($filename);
=cut
sub _mapfile {
my $self = shift;
my $file = shift || '';
$file =~ s/^\s*//o;
$file =~ s/\s*$//o;
unless ($file =~ /\w+/o) {
$file = '';
$self->_error("inappropriate filename($file)");
} else {
my $xfile = $self->_var('filename') || '';
if ($xfile =~ /.+/o) {
$file = '';
$self->_error("can't reuse ".ref($self)." object($xfile) for another file($file)");
}
}
return $file;
}
=item _mapperms
Maps given permissions to appropriate form for B<FileHandle>
my $perms = $o_dat->_mapperms('+<');
=cut
sub _mapperms {
my $self = shift;
my $args = shift || '';
$args =~ s/^\s*//o;
$args =~ s/\s*$//o;
my %map = ( # we only recognise
'ro' => '<',
'readonly' => '<',
'rw' => '+<',
'readwrite' => '+<',
);
my $ret = $map{$args} || $args;
$self->_error("Inappropriate permissions($args) - use this: ".Dumper(\%map))
unless $ret =~ /.+/o;
return $ret;
}
=item _maperrs
Map error handlers, if given
my $h_errs = $o_dat->_maperrs(\%error_handlers);
=cut
sub _mapperrs {
my $self = shift;
my $h_errs = shift || {};
if (ref($h_errs) ne 'HASH') {
$self->_error("invalid error_handlers($h_errs)");
} else {
foreach my $key (%{$h_errs}) {
$self->{'_err'}{$key} = $$h_errs{$key};
}
}
return $self->{'_err'};
}
=item _enter
Mark the entering of a special section, or state
my $entered = $o_dat->enter('search');
=cut
sub _enter {
my $self = shift;
my $sect = shift;
my $last = $self->_var('state');
$self->_var('last' => $last) unless $last eq 'limbo';
my $next = $self->_var('state' => $sect);
# $self->_debug("vars") if $File::Data::DEBUG;
return $next;
}
=item _leave
Mark the leaving of a special section, or state
my $left = $o_dat->_leave('search');
=cut
sub _leave {
my $self = shift;
my $sect = shift;
my $last = $self->_var('state');
$self->_var('last' => $last) unless $last eq 'limbo';
my $next = $self->_var('state' => 'limbo');
# $self->_debug("leaving state($last) => next($next)") if $File::Data::DEBUG;
return $last;
}
=item _fh
Get and set B<FileHandle>.
Returns undef otherwise.
my $FH = $o_dat->_fh($FH);
=cut
sub _fh {
my $self = shift;
my $arg = shift;
my $FH = (defined($arg)
? $self->_var('filehandle', $arg)
: $self->_var('filehandle')
);
$self->_error("no filehandle($FH)") unless $FH;
return $FH;
}
=back
=cut
# ================================================================
=head1 UTILITY
Private methods not expected to be called by anybody, and completely unsupported.
Expected to metamorphose regularly - do B<not> call these - you have been warned!
=over 4
The following utility methods return integer values
1 = success
0 = failure
=item _init
Setup object, open a file, with permissions.
my $i_ok = $o_date->_init($file, $perm, $h_errs);
=cut
sub _init {
my $self = shift;
my $file = shift;
my $perm = shift;
my $h_err= shift;
my $i_ok = 0;
# $self->_enter('init');
$self->_debug("in: file($file), perm($perm), h_err($h_err)") if $File::Data::DEBUG;
$file = $self->_mapfile($file );
$perm = $self->_mapperms($perm ) if $file;
$h_err = $self->_mapperrs($h_err) if $file; # if $perm
if ($file) { # unless $h_err
$i_ok = $self->_check_access($file, $perm);
if ($i_ok == 1) {
$file = $self->_var('filename', $file);
$perm = $self->_var('permissions', $perm);
$i_ok = $self->_open($file, $perm);
$i_ok = $self->_backup() if $i_ok && $self->_var('backup');
}
}
# $self->_error("failed for file($file) and perm($perm)") unless $i_ok == 1;
$self->_debug("out: $i_ok") if $File::Data::DEBUG;
$self->_leave('init');
return $i_ok;
}
=item _check_access
Checks the args for existence and appropriate permissions etc.
my $i_isok = $o_dat->_check_access($filename, $permissions);
=cut
sub _check_access {
my $self = shift;
my $file = shift;
my $perm = shift;
my $i_ok = 0;
if (!($file =~ /.+/o && $perm =~ /.+/o)) {
$self->_error("no filename($file) or permissions($perm) given!");
} else {
stat($file); # just once
if (! -e _) {
$self->_error("target($file) does not exist!");
} else {
if (! -f _) {
$self->_error("target($file) is not a file!");
} else {
if (!-r _) {
$self->_error("file($file) cannot be read by effective uid($>) or gid($))!");
} else {
if ($perm =~ /^<$/o) { # readable
$i_ok++;
} else {
if (! -w $file) {
$self->_error("file($file) cannot be written by effective uid($>) or gid($))!");
} else { # writable
$self->_var('writable' => 1);
$i_ok++;
}
}
}
}
}
}
return $i_ok;
}
=item _open
Open the file
my $i_ok = $o_dat->_open;
=cut
sub _open {
my $self = shift;
my $file = $self->_var('filename');
my $perm = $self->_var('permissions');
my $i_ok = 0;
my $open = "$perm $file";
$self->_debug("using open($open)");
my $FH = FileHandle->new("$perm $file") || '';
my @file = ();
# my $FH = tie(@file, 'Tie::File', $file) or '';
if (!$FH) {
$self->_error("Can't get handle($FH) for file($file) with permissions($perm)! $!");
} else {
# $FH = $self->_fh(\@file);
$FH = $self->_fh($FH);
if ($FH) {
$i_ok++;
$i_ok = $self->_lock(); # if $self->_writable;
}
$self->_debug("FH($FH) => i_ok($i_ok)");
}
return $i_ok;
};
=item _lock
Lock the file
my $i_ok = $o_dat->_lock;
=cut
sub _lock {
my $self = shift;
my $FH = $self->_fh;
my $i_ok = 0;
if ($FH) {
my $file = $self->_var('filename');
# $DB::single=2; # rjsf
if ($self->_writable) {
# if ($FH->flock(LOCK_EX | LOCK_NB)) {
if (flock($FH, LOCK_EX | LOCK_NB)) {
$i_ok++;
} else {
$self->_error("Can't overlock file($file) handle($FH)!");
}
} else {
# if ($FH->flock(LOCK_SH | LOCK_NB)) {
if (flock($FH, LOCK_SH | LOCK_NB)) {
$i_ok++;
} else {
$self->_error("Can't lock shared file($file) handle($FH)!");
}
}
}
return $i_ok;
};
=item _unlock
Unlock the file
my $i_ok = $o_dat->_unlock;
=cut
sub _unlock {
my $self = shift;
my $FH = $self->_fh;
my $i_ok = 0;
if ($FH) {
# if (flock($FH, LOCK_UN)) { apparently there's a race, perl does it better - see close :) }
$i_ok++;
} else {
my $file = $self->_var('filename');
$self->_error("Can't unlock file($file) handle($FH)!");
}
return $i_ok;
}
=item _close
Close the filehandle
my $i_ok = $o_dat->_close;
=cut
sub _close {
my $self = shift;
my $FH = $self->_fh if $self->_var('filehandle');
my $i_ok = 0;
if ($FH) {
# $FH->untie;
if ($FH->close) { # perl unlocks it better than we can (race)
$i_ok++;
} else {
$DB::single=2; # rjsf
my $file = $self->_var('filename');
$self->_error("Can't close file($file) handle($FH)!");
}
}
return $i_ok;
}
sub _writable {
my $self = shift;
my $i_ok = $self->_var('writable');
if ($i_ok != 1) {
my $file = $self->_var('filename');
my $perms = $self->_var('permissions');
$self->_debug("$file not writable($i_ok) with permissions($perms)");
}
return $i_ok;
}
sub DESTROY {
my $self = shift;
$self->_close;
}
=item do
Simple wrapper for method calls, returning the content.
my @inserted = $o_dat->do('insert', @this);
my @appended = $o_dat->do('append', @this);
An addendum to this method, and to make life generally easier, is that
you can also call any of the above methods in uppercase, to call via
B<do()> eg;
my @data = $o_dat->WRITE($this)->APPEND->($that)->read;
First argument is the method to call, followed by the arguments that
method expects.
perl -MFile::Data -e "print File::Data->new($file)->INSERT(3,
\"third line\n\")->READ";
If you want to get at the output of a particular called method see
L<return()>
=cut
sub DO {
my $self = shift;
my $call = shift;
my @res = ();
$self->_enter('do');
$self->_debug('in: '.Dumper([$call, @_])) if $File::Data::DEBUG;
if ($call !~ /^($_METHODS)$/io) {
$self->_error("unsupported method($call)");
} else {
$call = uc($call);
$self->_var($call => []);
my @res = $self->$call(@_);
$self->_var($call => (ref($res[0]) ? $res[0] : \@res));
}
$self->_debug('out: $self') if $File::Data::DEBUG;
$self->_leave('do');
return @res;
}
sub do {
my $self = shift;
$self->DO(@_);
return $self;
}
=back
=head1 LICENSE AND COPYRIGHT
Copyright 2012 by Richard Foley <file.data@rfi.net>
This program is free software; you can redistribute it and/or modify it under
the same terms as Perl itself.
See http://www.perl.com/perl/misc/Artistic.html
=cut
1;