/*
* tclExecute.c --
*
* This file contains procedures that execute byte-compiled Tcl
* commands.
*
* Copyright (c) 1996-1997 Sun Microsystems, Inc.
* Copyright (c) 1998-2000 by Scriptics Corporation.
* Copyright (c) 2001 by Kevin B. Kenny. All rights reserved.
*
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
* RCS: @(#) $Id: tclExecute.c,v 1.94.2.5 2003/09/19 18:43:00 msofer Exp $
*/
#include "tclInt.h"
#include "tclCompile.h"
#ifndef TCL_NO_MATH
# include "tclMath.h"
#endif
/*
* The stuff below is a bit of a hack so that this file can be used
* in environments that include no UNIX, i.e. no errno. Just define
* errno here.
*/
#ifndef TCL_GENERIC_ONLY
# include "tclPort.h"
#else /* TCL_GENERIC_ONLY */
# ifndef NO_FLOAT_H
# include <float.h>
# else /* NO_FLOAT_H */
# ifndef NO_VALUES_H
# include <values.h>
# endif /* !NO_VALUES_H */
# endif /* !NO_FLOAT_H */
# define NO_ERRNO_H
#endif /* !TCL_GENERIC_ONLY */
#ifdef NO_ERRNO_H
int errno;
# define EDOM 33
# define ERANGE 34
#endif
/*
* Need DBL_MAX for IS_INF() macro...
*/
#ifndef DBL_MAX
# ifdef MAXDOUBLE
# define DBL_MAX MAXDOUBLE
# else /* !MAXDOUBLE */
/*
* This value is from the Solaris headers, but doubles seem to be the
* same size everywhere. Long doubles aren't, but we don't use those.
*/
# define DBL_MAX 1.79769313486231570e+308
# endif /* MAXDOUBLE */
#endif /* !DBL_MAX */
/*
* Boolean flag indicating whether the Tcl bytecode interpreter has been
* initialized.
*/
static int execInitialized = 0;
TCL_DECLARE_MUTEX(execMutex)
#ifdef TCL_COMPILE_DEBUG
/*
* Variable that controls whether execution tracing is enabled and, if so,
* what level of tracing is desired:
* 0: no execution tracing
* 1: trace invocations of Tcl procs only
* 2: trace invocations of all (not compiled away) commands
* 3: display each instruction executed
* This variable is linked to the Tcl variable "tcl_traceExec".
*/
int tclTraceExec = 0;
#endif
/*
* Mapping from expression instruction opcodes to strings; used for error
* messages. Note that these entries must match the order and number of the
* expression opcodes (e.g., INST_LOR) in tclCompile.h.
*/
static char *operatorStrings[] = {
"||", "&&", "|", "^", "&", "==", "!=", "<", ">", "<=", ">=", "<<", ">>",
"+", "-", "*", "/", "%", "+", "-", "~", "!",
"BUILTIN FUNCTION", "FUNCTION",
"", "", "", "", "", "", "", "", "eq", "ne",
};
/*
* Mapping from Tcl result codes to strings; used for error and debugging
* messages.
*/
#ifdef TCL_COMPILE_DEBUG
static char *resultStrings[] = {
"TCL_OK", "TCL_ERROR", "TCL_RETURN", "TCL_BREAK", "TCL_CONTINUE"
};
#endif
/*
* These are used by evalstats to monitor object usage in Tcl.
*/
#ifdef TCL_COMPILE_STATS
long tclObjsAlloced = 0;
long tclObjsFreed = 0;
#define TCL_MAX_SHARED_OBJ_STATS 5
long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS] = { 0, 0, 0, 0, 0 };
#endif /* TCL_COMPILE_STATS */
/*
* Macros for testing floating-point values for certain special cases. Test
* for not-a-number by comparing a value against itself; test for infinity
* by comparing against the largest floating-point value.
*/
#define IS_NAN(v) ((v) != (v))
#define IS_INF(v) (((v) > DBL_MAX) || ((v) < -DBL_MAX))
/*
* The new macro for ending an instruction; note that a
* reasonable C-optimiser will resolve all branches
* at compile time. (result) is always a constant; the macro
* NEXT_INST_F handles constant (nCleanup), NEXT_INST_V is
* resolved at runtime for variable (nCleanup).
*
* ARGUMENTS:
* pcAdjustment: how much to increment pc
* nCleanup: how many objects to remove from the stack
* result: 0 indicates no object should be pushed on the
* stack; otherwise, push objResultPtr. If (result < 0),
* objResultPtr already has the correct reference count.
*/
#define NEXT_INST_F(pcAdjustment, nCleanup, result) \
if (nCleanup == 0) {\
if (result != 0) {\
if ((result) > 0) {\
PUSH_OBJECT(objResultPtr);\
} else {\
stackPtr[++stackTop] = objResultPtr;\
}\
} \
pc += (pcAdjustment);\
goto cleanup0;\
} else if (result != 0) {\
if ((result) > 0) {\
Tcl_IncrRefCount(objResultPtr);\
}\
pc += (pcAdjustment);\
switch (nCleanup) {\
case 1: goto cleanup1_pushObjResultPtr;\
case 2: goto cleanup2_pushObjResultPtr;\
default: panic("ERROR: bad usage of macro NEXT_INST_F");\
}\
} else {\
pc += (pcAdjustment);\
switch (nCleanup) {\
case 1: goto cleanup1;\
case 2: goto cleanup2;\
default: panic("ERROR: bad usage of macro NEXT_INST_F");\
}\
}
#define NEXT_INST_V(pcAdjustment, nCleanup, result) \
pc += (pcAdjustment);\
cleanup = (nCleanup);\
if (result) {\
if ((result) > 0) {\
Tcl_IncrRefCount(objResultPtr);\
}\
goto cleanupV_pushObjResultPtr;\
} else {\
goto cleanupV;\
}
/*
* Macros used to cache often-referenced Tcl evaluation stack information
* in local variables. Note that a DECACHE_STACK_INFO()-CACHE_STACK_INFO()
* pair must surround any call inside TclExecuteByteCode (and a few other
* procedures that use this scheme) that could result in a recursive call
* to TclExecuteByteCode.
*/
#define CACHE_STACK_INFO() \
stackPtr = eePtr->stackPtr; \
stackTop = eePtr->stackTop
#define DECACHE_STACK_INFO() \
eePtr->stackTop = stackTop
/*
* Macros used to access items on the Tcl evaluation stack. PUSH_OBJECT
* increments the object's ref count since it makes the stack have another
* reference pointing to the object. However, POP_OBJECT does not decrement
* the ref count. This is because the stack may hold the only reference to
* the object, so the object would be destroyed if its ref count were
* decremented before the caller had a chance to, e.g., store it in a
* variable. It is the caller's responsibility to decrement the ref count
* when it is finished with an object.
*
* WARNING! It is essential that objPtr only appear once in the PUSH_OBJECT
* macro. The actual parameter might be an expression with side effects,
* and this ensures that it will be executed only once.
*/
#define PUSH_OBJECT(objPtr) \
Tcl_IncrRefCount(stackPtr[++stackTop] = (objPtr))
#define POP_OBJECT() \
(stackPtr[stackTop--])
/*
* Macros used to trace instruction execution. The macros TRACE,
* TRACE_WITH_OBJ, and O2S are only used inside TclExecuteByteCode.
* O2S is only used in TRACE* calls to get a string from an object.
*/
#ifdef TCL_COMPILE_DEBUG
# define TRACE(a) \
if (traceInstructions) { \
fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, stackTop, \
(unsigned int)(pc - codePtr->codeStart), \
GetOpcodeName(pc)); \
printf a; \
}
# define TRACE_APPEND(a) \
if (traceInstructions) { \
printf a; \
}
# define TRACE_WITH_OBJ(a, objPtr) \
if (traceInstructions) { \
fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, stackTop, \
(unsigned int)(pc - codePtr->codeStart), \
GetOpcodeName(pc)); \
printf a; \
TclPrintObject(stdout, objPtr, 30); \
fprintf(stdout, "\n"); \
}
# define O2S(objPtr) \
(objPtr ? TclGetString(objPtr) : "")
#else /* !TCL_COMPILE_DEBUG */
# define TRACE(a)
# define TRACE_APPEND(a)
# define TRACE_WITH_OBJ(a, objPtr)
# define O2S(objPtr)
#endif /* TCL_COMPILE_DEBUG */
/*
* Macro to read a string containing either a wide or an int and
* decide which it is while decoding it at the same time. This
* enforces the policy that integer constants between LONG_MIN and
* LONG_MAX (inclusive) are represented by normal longs, and integer
* constants outside that range are represented by wide ints.
*
* GET_WIDE_OR_INT is the same as REQUIRE_WIDE_OR_INT except it never
* generates an error message.
*/
#define REQUIRE_WIDE_OR_INT(resultVar, objPtr, longVar, wideVar) \
(resultVar) = Tcl_GetWideIntFromObj(interp, (objPtr), &(wideVar)); \
if ((resultVar) == TCL_OK && (wideVar) >= Tcl_LongAsWide(LONG_MIN) \
&& (wideVar) <= Tcl_LongAsWide(LONG_MAX)) { \
(objPtr)->typePtr = &tclIntType; \
(objPtr)->internalRep.longValue = (longVar) \
= Tcl_WideAsLong(wideVar); \
}
#define GET_WIDE_OR_INT(resultVar, objPtr, longVar, wideVar) \
(resultVar) = Tcl_GetWideIntFromObj((Tcl_Interp *) NULL, (objPtr), \
&(wideVar)); \
if ((resultVar) == TCL_OK && (wideVar) >= Tcl_LongAsWide(LONG_MIN) \
&& (wideVar) <= Tcl_LongAsWide(LONG_MAX)) { \
(objPtr)->typePtr = &tclIntType; \
(objPtr)->internalRep.longValue = (longVar) \
= Tcl_WideAsLong(wideVar); \
}
/*
* Combined with REQUIRE_WIDE_OR_INT, this gets a long value from
* an obj.
*/
#define FORCE_LONG(objPtr, longVar, wideVar) \
if ((objPtr)->typePtr == &tclWideIntType) { \
(longVar) = Tcl_WideAsLong(wideVar); \
}
#define IS_INTEGER_TYPE(typePtr) \
((typePtr) == &tclIntType || (typePtr) == &tclWideIntType)
#define IS_NUMERIC_TYPE(typePtr) \
(IS_INTEGER_TYPE(typePtr) || (typePtr) == &tclDoubleType)
#define W0 Tcl_LongAsWide(0)
/*
* For tracing that uses wide values.
*/
#define LLD "%" TCL_LL_MODIFIER "d"
#ifndef TCL_WIDE_INT_IS_LONG
/*
* Extract a double value from a general numeric object.
*/
#define GET_DOUBLE_VALUE(doubleVar, objPtr, typePtr) \
if ((typePtr) == &tclIntType) { \
(doubleVar) = (double) (objPtr)->internalRep.longValue; \
} else if ((typePtr) == &tclWideIntType) { \
(doubleVar) = Tcl_WideAsDouble((objPtr)->internalRep.wideValue);\
} else { \
(doubleVar) = (objPtr)->internalRep.doubleValue; \
}
#else /* TCL_WIDE_INT_IS_LONG */
#define GET_DOUBLE_VALUE(doubleVar, objPtr, typePtr) \
if (((typePtr) == &tclIntType) || ((typePtr) == &tclWideIntType)) { \
(doubleVar) = (double) (objPtr)->internalRep.longValue; \
} else { \
(doubleVar) = (objPtr)->internalRep.doubleValue; \
}
#endif /* TCL_WIDE_INT_IS_LONG */
/*
* Declarations for local procedures to this file:
*/
static int TclExecuteByteCode _ANSI_ARGS_((Tcl_Interp *interp,
ByteCode *codePtr));
static int ExprAbsFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprBinaryFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprCallMathFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, int objc, Tcl_Obj **objv));
static int ExprDoubleFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprIntFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprRandFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprRoundFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprSrandFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprUnaryFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
static int ExprWideFunc _ANSI_ARGS_((Tcl_Interp *interp,
ExecEnv *eePtr, ClientData clientData));
#ifdef TCL_COMPILE_STATS
static int EvalStatsCmd _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, int objc,
Tcl_Obj *CONST objv[]));
#endif /* TCL_COMPILE_STATS */
#ifdef TCL_COMPILE_DEBUG
static char * GetOpcodeName _ANSI_ARGS_((unsigned char *pc));
#endif /* TCL_COMPILE_DEBUG */
static ExceptionRange * GetExceptRangeForPc _ANSI_ARGS_((unsigned char *pc,
int catchOnly, ByteCode* codePtr));
static char * GetSrcInfoForPc _ANSI_ARGS_((unsigned char *pc,
ByteCode* codePtr, int *lengthPtr));
static void GrowEvaluationStack _ANSI_ARGS_((ExecEnv *eePtr));
static void IllegalExprOperandType _ANSI_ARGS_((
Tcl_Interp *interp, unsigned char *pc,
Tcl_Obj *opndPtr));
static void InitByteCodeExecution _ANSI_ARGS_((
Tcl_Interp *interp));
#ifdef TCL_COMPILE_DEBUG
static void PrintByteCodeInfo _ANSI_ARGS_((ByteCode *codePtr));
static char * StringForResultCode _ANSI_ARGS_((int result));
static void ValidatePcAndStackTop _ANSI_ARGS_((
ByteCode *codePtr, unsigned char *pc,
int stackTop, int stackLowerBound));
#endif /* TCL_COMPILE_DEBUG */
static int VerifyExprObjType _ANSI_ARGS_((Tcl_Interp *interp,
Tcl_Obj *objPtr));
/*
* Table describing the built-in math functions. Entries in this table are
* indexed by the values of the INST_CALL_BUILTIN_FUNC instruction's
* operand byte.
*/
BuiltinFunc tclBuiltinFuncTable[] = {
#ifndef TCL_NO_MATH
{"acos", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) acos},
{"asin", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) asin},
{"atan", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) atan},
{"atan2", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) atan2},
{"ceil", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) ceil},
{"cos", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) cos},
{"cosh", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) cosh},
{"exp", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) exp},
{"floor", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) floor},
{"fmod", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) fmod},
{"hypot", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) hypot},
{"log", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) log},
{"log10", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) log10},
{"pow", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) pow},
{"sin", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) sin},
{"sinh", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) sinh},
{"sqrt", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) sqrt},
{"tan", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) tan},
{"tanh", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) tanh},
#endif
{"abs", 1, {TCL_EITHER}, ExprAbsFunc, 0},
{"double", 1, {TCL_EITHER}, ExprDoubleFunc, 0},
{"int", 1, {TCL_EITHER}, ExprIntFunc, 0},
{"rand", 0, {TCL_EITHER}, ExprRandFunc, 0}, /* NOTE: rand takes no args. */
{"round", 1, {TCL_EITHER}, ExprRoundFunc, 0},
{"srand", 1, {TCL_INT}, ExprSrandFunc, 0},
{"wide", 1, {TCL_EITHER}, ExprWideFunc, 0},
{0},
};
/*
*----------------------------------------------------------------------
*
* InitByteCodeExecution --
*
* This procedure is called once to initialize the Tcl bytecode
* interpreter.
*
* Results:
* None.
*
* Side effects:
* This procedure initializes the array of instruction names. If
* compiling with the TCL_COMPILE_STATS flag, it initializes the
* array that counts the executions of each instruction and it
* creates the "evalstats" command. It also establishes the link
* between the Tcl "tcl_traceExec" and C "tclTraceExec" variables.
*
*----------------------------------------------------------------------
*/
static void
InitByteCodeExecution(interp)
Tcl_Interp *interp; /* Interpreter for which the Tcl variable
* "tcl_traceExec" is linked to control
* instruction tracing. */
{
#ifdef TCL_COMPILE_DEBUG
if (Tcl_LinkVar(interp, "tcl_traceExec", (char *) &tclTraceExec,
TCL_LINK_INT) != TCL_OK) {
panic("InitByteCodeExecution: can't create link for tcl_traceExec variable");
}
#endif
#ifdef TCL_COMPILE_STATS
Tcl_CreateObjCommand(interp, "evalstats", EvalStatsCmd,
(ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
#endif /* TCL_COMPILE_STATS */
}
/*
*----------------------------------------------------------------------
*
* TclCreateExecEnv --
*
* This procedure creates a new execution environment for Tcl bytecode
* execution. An ExecEnv points to a Tcl evaluation stack. An ExecEnv
* is typically created once for each Tcl interpreter (Interp
* structure) and recursively passed to TclExecuteByteCode to execute
* ByteCode sequences for nested commands.
*
* Results:
* A newly allocated ExecEnv is returned. This points to an empty
* evaluation stack of the standard initial size.
*
* Side effects:
* The bytecode interpreter is also initialized here, as this
* procedure will be called before any call to TclExecuteByteCode.
*
*----------------------------------------------------------------------
*/
#define TCL_STACK_INITIAL_SIZE 2000
ExecEnv *
TclCreateExecEnv(interp)
Tcl_Interp *interp; /* Interpreter for which the execution
* environment is being created. */
{
ExecEnv *eePtr = (ExecEnv *) ckalloc(sizeof(ExecEnv));
Tcl_Obj **stackPtr;
stackPtr = (Tcl_Obj **)
ckalloc((size_t) (TCL_STACK_INITIAL_SIZE * sizeof(Tcl_Obj *)));
/*
* Use the bottom pointer to keep a reference count; the
* execution environment holds a reference.
*/
stackPtr++;
eePtr->stackPtr = stackPtr;
stackPtr[-1] = (Tcl_Obj *) ((char *) 1);
eePtr->stackTop = -1;
eePtr->stackEnd = (TCL_STACK_INITIAL_SIZE - 2);
eePtr->errorInfo = Tcl_NewStringObj("::errorInfo", -1);
Tcl_IncrRefCount(eePtr->errorInfo);
eePtr->errorCode = Tcl_NewStringObj("::errorCode", -1);
Tcl_IncrRefCount(eePtr->errorCode);
Tcl_MutexLock(&execMutex);
if (!execInitialized) {
TclInitAuxDataTypeTable();
InitByteCodeExecution(interp);
execInitialized = 1;
}
Tcl_MutexUnlock(&execMutex);
return eePtr;
}
#undef TCL_STACK_INITIAL_SIZE
/*
*----------------------------------------------------------------------
*
* TclDeleteExecEnv --
*
* Frees the storage for an ExecEnv.
*
* Results:
* None.
*
* Side effects:
* Storage for an ExecEnv and its contained storage (e.g. the
* evaluation stack) is freed.
*
*----------------------------------------------------------------------
*/
void
TclDeleteExecEnv(eePtr)
ExecEnv *eePtr; /* Execution environment to free. */
{
if (eePtr->stackPtr[-1] == (Tcl_Obj *) ((char *) 1)) {
ckfree((char *) (eePtr->stackPtr-1));
} else {
panic("ERROR: freeing an execEnv whose stack is still in use.\n");
}
TclDecrRefCount(eePtr->errorInfo);
TclDecrRefCount(eePtr->errorCode);
ckfree((char *) eePtr);
}
/*
*----------------------------------------------------------------------
*
* TclFinalizeExecution --
*
* Finalizes the execution environment setup so that it can be
* later reinitialized.
*
* Results:
* None.
*
* Side effects:
* After this call, the next time TclCreateExecEnv will be called
* it will call InitByteCodeExecution.
*
*----------------------------------------------------------------------
*/
void
TclFinalizeExecution()
{
Tcl_MutexLock(&execMutex);
execInitialized = 0;
Tcl_MutexUnlock(&execMutex);
TclFinalizeAuxDataTypeTable();
}
/*
*----------------------------------------------------------------------
*
* GrowEvaluationStack --
*
* This procedure grows a Tcl evaluation stack stored in an ExecEnv.
*
* Results:
* None.
*
* Side effects:
* The size of the evaluation stack is doubled.
*
*----------------------------------------------------------------------
*/
static void
GrowEvaluationStack(eePtr)
register ExecEnv *eePtr; /* Points to the ExecEnv with an evaluation
* stack to enlarge. */
{
/*
* The current Tcl stack elements are stored from eePtr->stackPtr[0]
* to eePtr->stackPtr[eePtr->stackEnd] (inclusive).
*/
int currElems = (eePtr->stackEnd + 1);
int newElems = 2*currElems;
int currBytes = currElems * sizeof(Tcl_Obj *);
int newBytes = 2*currBytes;
Tcl_Obj **newStackPtr = (Tcl_Obj **) ckalloc((unsigned) newBytes);
Tcl_Obj **oldStackPtr = eePtr->stackPtr;
/*
* We keep the stack reference count as a (char *), as that
* works nicely as a portable pointer-sized counter.
*/
char *refCount = (char *) oldStackPtr[-1];
/*
* Copy the existing stack items to the new stack space, free the old
* storage if appropriate, and record the refCount of the new stack
* held by the environment.
*/
newStackPtr++;
memcpy((VOID *) newStackPtr, (VOID *) oldStackPtr,
(size_t) currBytes);
if (refCount == (char *) 1) {
ckfree((VOID *) (oldStackPtr-1));
} else {
/*
* Remove the reference corresponding to the
* environment pointer.
*/
oldStackPtr[-1] = (Tcl_Obj *) (refCount-1);
}
eePtr->stackPtr = newStackPtr;
eePtr->stackEnd = (newElems - 2); /* index of last usable item */
newStackPtr[-1] = (Tcl_Obj *) ((char *) 1);
}
/*
*--------------------------------------------------------------
*
* Tcl_ExprObj --
*
* Evaluate an expression in a Tcl_Obj.
*
* Results:
* A standard Tcl object result. If the result is other than TCL_OK,
* then the interpreter's result contains an error message. If the
* result is TCL_OK, then a pointer to the expression's result value
* object is stored in resultPtrPtr. In that case, the object's ref
* count is incremented to reflect the reference returned to the
* caller; the caller is then responsible for the resulting object
* and must, for example, decrement the ref count when it is finished
* with the object.
*
* Side effects:
* Any side effects caused by subcommands in the expression, if any.
* The interpreter result is not modified unless there is an error.
*
*--------------------------------------------------------------
*/
int
Tcl_ExprObj(interp, objPtr, resultPtrPtr)
Tcl_Interp *interp; /* Context in which to evaluate the
* expression. */
register Tcl_Obj *objPtr; /* Points to Tcl object containing
* expression to evaluate. */
Tcl_Obj **resultPtrPtr; /* Where the Tcl_Obj* that is the expression
* result is stored if no errors occur. */
{
Interp *iPtr = (Interp *) interp;
CompileEnv compEnv; /* Compilation environment structure
* allocated in frame. */
LiteralTable *localTablePtr = &(compEnv.localLitTable);
register ByteCode *codePtr = NULL;
/* Tcl Internal type of bytecode.
* Initialized to avoid compiler warning. */
AuxData *auxDataPtr;
LiteralEntry *entryPtr;
Tcl_Obj *saveObjPtr;
char *string;
int length, i, result;
/*
* First handle some common expressions specially.
*/
string = Tcl_GetStringFromObj(objPtr, &length);
if (length == 1) {
if (*string == '0') {
*resultPtrPtr = Tcl_NewLongObj(0);
Tcl_IncrRefCount(*resultPtrPtr);
return TCL_OK;
} else if (*string == '1') {
*resultPtrPtr = Tcl_NewLongObj(1);
Tcl_IncrRefCount(*resultPtrPtr);
return TCL_OK;
}
} else if ((length == 2) && (*string == '!')) {
if (*(string+1) == '0') {
*resultPtrPtr = Tcl_NewLongObj(1);
Tcl_IncrRefCount(*resultPtrPtr);
return TCL_OK;
} else if (*(string+1) == '1') {
*resultPtrPtr = Tcl_NewLongObj(0);
Tcl_IncrRefCount(*resultPtrPtr);
return TCL_OK;
}
}
/*
* Get the ByteCode from the object. If it exists, make sure it hasn't
* been invalidated by, e.g., someone redefining a command with a
* compile procedure (this might make the compiled code wrong). If
* necessary, convert the object to be a ByteCode object and compile it.
* Also, if the code was compiled in/for a different interpreter, we
* recompile it.
*
* Precompiled expressions, however, are immutable and therefore
* they are not recompiled, even if the epoch has changed.
*
*/
if (objPtr->typePtr == &tclByteCodeType) {
codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr;
if (((Interp *) *codePtr->interpHandle != iPtr)
|| (codePtr->compileEpoch != iPtr->compileEpoch)) {
if (codePtr->flags & TCL_BYTECODE_PRECOMPILED) {
if ((Interp *) *codePtr->interpHandle != iPtr) {
panic("Tcl_ExprObj: compiled expression jumped interps");
}
codePtr->compileEpoch = iPtr->compileEpoch;
} else {
(*tclByteCodeType.freeIntRepProc)(objPtr);
objPtr->typePtr = (Tcl_ObjType *) NULL;
}
}
}
if (objPtr->typePtr != &tclByteCodeType) {
TclInitCompileEnv(interp, &compEnv, string, length);
result = TclCompileExpr(interp, string, length, &compEnv);
/*
* Free the compilation environment's literal table bucket array if
* it was dynamically allocated.
*/
if (localTablePtr->buckets != localTablePtr->staticBuckets) {
ckfree((char *) localTablePtr->buckets);
}
if (result != TCL_OK) {
/*
* Compilation errors. Free storage allocated for compilation.
*/
#ifdef TCL_COMPILE_DEBUG
TclVerifyLocalLiteralTable(&compEnv);
#endif /*TCL_COMPILE_DEBUG*/
entryPtr = compEnv.literalArrayPtr;
for (i = 0; i < compEnv.literalArrayNext; i++) {
TclReleaseLiteral(interp, entryPtr->objPtr);
entryPtr++;
}
#ifdef TCL_COMPILE_DEBUG
TclVerifyGlobalLiteralTable(iPtr);
#endif /*TCL_COMPILE_DEBUG*/
auxDataPtr = compEnv.auxDataArrayPtr;
for (i = 0; i < compEnv.auxDataArrayNext; i++) {
if (auxDataPtr->type->freeProc != NULL) {
auxDataPtr->type->freeProc(auxDataPtr->clientData);
}
auxDataPtr++;
}
TclFreeCompileEnv(&compEnv);
return result;
}
/*
* Successful compilation. If the expression yielded no
* instructions, push an zero object as the expression's result.
*/
if (compEnv.codeNext == compEnv.codeStart) {
TclEmitPush(TclRegisterLiteral(&compEnv, "0", 1, /*onHeap*/ 0),
&compEnv);
}
/*
* Add a "done" instruction as the last instruction and change the
* object into a ByteCode object. Ownership of the literal objects
* and aux data items is given to the ByteCode object.
*/
compEnv.numSrcBytes = iPtr->termOffset;
TclEmitOpcode(INST_DONE, &compEnv);
TclInitByteCodeObj(objPtr, &compEnv);
TclFreeCompileEnv(&compEnv);
codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr;
#ifdef TCL_COMPILE_DEBUG
if (tclTraceCompile == 2) {
TclPrintByteCodeObj(interp, objPtr);
}
#endif /* TCL_COMPILE_DEBUG */
}
/*
* Execute the expression after first saving the interpreter's result.
*/
saveObjPtr = Tcl_GetObjResult(interp);
Tcl_IncrRefCount(saveObjPtr);
Tcl_ResetResult(interp);
/*
* Increment the code's ref count while it is being executed. If
* afterwards no references to it remain, free the code.
*/
codePtr->refCount++;
result = TclExecuteByteCode(interp, codePtr);
codePtr->refCount--;
if (codePtr->refCount <= 0) {
TclCleanupByteCode(codePtr);
objPtr->typePtr = NULL;
objPtr->internalRep.otherValuePtr = NULL;
}
/*
* If the expression evaluated successfully, store a pointer to its
* value object in resultPtrPtr then restore the old interpreter result.
* We increment the object's ref count to reflect the reference that we
* are returning to the caller. We also decrement the ref count of the
* interpreter's result object after calling Tcl_SetResult since we
* next store into that field directly.
*/
if (result == TCL_OK) {
*resultPtrPtr = iPtr->objResultPtr;
Tcl_IncrRefCount(iPtr->objResultPtr);
Tcl_SetObjResult(interp, saveObjPtr);
}
TclDecrRefCount(saveObjPtr);
return result;
}
/*
*----------------------------------------------------------------------
*
* TclCompEvalObj --
*
* This procedure evaluates the script contained in a Tcl_Obj by
* first compiling it and then passing it to TclExecuteByteCode.
*
* Results:
* The return value is one of the return codes defined in tcl.h
* (such as TCL_OK), and interp->objResultPtr refers to a Tcl object
* that either contains the result of executing the code or an
* error message.
*
* Side effects:
* Almost certainly, depending on the ByteCode's instructions.
*
*----------------------------------------------------------------------
*/
int
TclCompEvalObj(interp, objPtr)
Tcl_Interp *interp;
Tcl_Obj *objPtr;
{
register Interp *iPtr = (Interp *) interp;
register ByteCode* codePtr; /* Tcl Internal type of bytecode. */
int oldCount = iPtr->cmdCount; /* Used to tell whether any commands
* at all were executed. */
char *script;
int numSrcBytes;
int result;
Namespace *namespacePtr;
/*
* Check that the interpreter is ready to execute scripts
*/
iPtr->numLevels++;
if (TclInterpReady(interp) == TCL_ERROR) {
iPtr->numLevels--;
return TCL_ERROR;
}
if (iPtr->varFramePtr != NULL) {
namespacePtr = iPtr->varFramePtr->nsPtr;
} else {
namespacePtr = iPtr->globalNsPtr;
}
/*
* If the object is not already of tclByteCodeType, compile it (and
* reset the compilation flags in the interpreter; this should be
* done after any compilation).
* Otherwise, check that it is "fresh" enough.
*/
if (objPtr->typePtr != &tclByteCodeType) {
recompileObj:
iPtr->errorLine = 1;
result = tclByteCodeType.setFromAnyProc(interp, objPtr);
if (result != TCL_OK) {
iPtr->numLevels--;
return result;
}
iPtr->evalFlags = 0;
codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr;
} else {
/*
* Make sure the Bytecode hasn't been invalidated by, e.g., someone
* redefining a command with a compile procedure (this might make the
* compiled code wrong).
* The object needs to be recompiled if it was compiled in/for a
* different interpreter, or for a different namespace, or for the
* same namespace but with different name resolution rules.
* Precompiled objects, however, are immutable and therefore
* they are not recompiled, even if the epoch has changed.
*
* To be pedantically correct, we should also check that the
* originating procPtr is the same as the current context procPtr
* (assuming one exists at all - none for global level). This
* code is #def'ed out because [info body] was changed to never
* return a bytecode type object, which should obviate us from
* the extra checks here.
*/
codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr;
if (((Interp *) *codePtr->interpHandle != iPtr)
|| (codePtr->compileEpoch != iPtr->compileEpoch)
#ifdef CHECK_PROC_ORIGINATION /* [Bug: 3412 Pedantic] */
|| (codePtr->procPtr != NULL && !(iPtr->varFramePtr &&
iPtr->varFramePtr->procPtr == codePtr->procPtr))
#endif
|| (codePtr->nsPtr != namespacePtr)
|| (codePtr->nsEpoch != namespacePtr->resolverEpoch)) {
if (codePtr->flags & TCL_BYTECODE_PRECOMPILED) {
if ((Interp *) *codePtr->interpHandle != iPtr) {
panic("Tcl_EvalObj: compiled script jumped interps");
}
codePtr->compileEpoch = iPtr->compileEpoch;
} else {
/*
* This byteCode is invalid: free it and recompile
*/
tclByteCodeType.freeIntRepProc(objPtr);
goto recompileObj;
}
}
}
/*
* Execute the commands. If the code was compiled from an empty string,
* don't bother executing the code.
*/
numSrcBytes = codePtr->numSrcBytes;
if ((numSrcBytes > 0) || (codePtr->flags & TCL_BYTECODE_PRECOMPILED)) {
/*
* Increment the code's ref count while it is being executed. If
* afterwards no references to it remain, free the code.
*/
codePtr->refCount++;
result = TclExecuteByteCode(interp, codePtr);
codePtr->refCount--;
if (codePtr->refCount <= 0) {
TclCleanupByteCode(codePtr);
}
} else {
result = TCL_OK;
}
iPtr->numLevels--;
/*
* If no commands at all were executed, check for asynchronous
* handlers so that they at least get one change to execute.
* This is needed to handle event loops written in Tcl with
* empty bodies.
*/
if ((oldCount == iPtr->cmdCount) && Tcl_AsyncReady()) {
result = Tcl_AsyncInvoke(interp, result);
/*
* If an error occurred, record information about what was being
* executed when the error occurred.
*/
if ((result == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) {
script = Tcl_GetStringFromObj(objPtr, &numSrcBytes);
Tcl_LogCommandInfo(interp, script, script, numSrcBytes);
}
}
/*
* Set the interpreter's termOffset member to the offset of the
* character just after the last one executed. We approximate the offset
* of the last character executed by using the number of characters
* compiled.
*/
iPtr->termOffset = numSrcBytes;
iPtr->flags &= ~ERR_ALREADY_LOGGED;
return result;
}
/*
*----------------------------------------------------------------------
*
* TclExecuteByteCode --
*
* This procedure executes the instructions of a ByteCode structure.
* It returns when a "done" instruction is executed or an error occurs.
*
* Results:
* The return value is one of the return codes defined in tcl.h
* (such as TCL_OK), and interp->objResultPtr refers to a Tcl object
* that either contains the result of executing the code or an
* error message.
*
* Side effects:
* Almost certainly, depending on the ByteCode's instructions.
*
*----------------------------------------------------------------------
*/
static int
TclExecuteByteCode(interp, codePtr)
Tcl_Interp *interp; /* Token for command interpreter. */
ByteCode *codePtr; /* The bytecode sequence to interpret. */
{
Interp *iPtr = (Interp *) interp;
ExecEnv *eePtr = iPtr->execEnvPtr;
/* Points to the execution environment. */
register Tcl_Obj **stackPtr = eePtr->stackPtr;
/* Cached evaluation stack base pointer. */
register int stackTop = eePtr->stackTop;
/* Cached top index of evaluation stack. */
register unsigned char *pc = codePtr->codeStart;
/* The current program counter. */
int opnd; /* Current instruction's operand byte(s). */
int pcAdjustment; /* Hold pc adjustment after instruction. */
int initStackTop = stackTop;/* Stack top at start of execution. */
ExceptionRange *rangePtr; /* Points to closest loop or catch exception
* range enclosing the pc. Used by various
* instructions and processCatch to
* process break, continue, and errors. */
int result = TCL_OK; /* Return code returned after execution. */
int storeFlags;
Tcl_Obj *valuePtr, *value2Ptr, *objPtr;
char *bytes;
int length;
long i = 0; /* Init. avoids compiler warning. */
Tcl_WideInt w;
register int cleanup;
Tcl_Obj *objResultPtr;
char *part1, *part2;
Var *varPtr, *arrayPtr;
CallFrame *varFramePtr = iPtr->varFramePtr;
#ifdef TCL_COMPILE_DEBUG
int traceInstructions = (tclTraceExec == 3);
char cmdNameBuf[21];
#endif
/*
* This procedure uses a stack to hold information about catch commands.
* This information is the current operand stack top when starting to
* execute the code for each catch command. It starts out with stack-
* allocated space but uses dynamically-allocated storage if needed.
*/
#define STATIC_CATCH_STACK_SIZE 4
int (catchStackStorage[STATIC_CATCH_STACK_SIZE]);
int *catchStackPtr = catchStackStorage;
int catchTop = -1;
#ifdef TCL_COMPILE_DEBUG
if (tclTraceExec >= 2) {
PrintByteCodeInfo(codePtr);
fprintf(stdout, " Starting stack top=%d\n", eePtr->stackTop);
fflush(stdout);
}
opnd = 0; /* Init. avoids compiler warning. */
#endif
#ifdef TCL_COMPILE_STATS
iPtr->stats.numExecutions++;
#endif
/*
* Make sure the catch stack is large enough to hold the maximum number
* of catch commands that could ever be executing at the same time. This
* will be no more than the exception range array's depth.
*/
if (codePtr->maxExceptDepth > STATIC_CATCH_STACK_SIZE) {
catchStackPtr = (int *)
ckalloc(codePtr->maxExceptDepth * sizeof(int));
}
/*
* Make sure the stack has enough room to execute this ByteCode.
*/
while ((stackTop + codePtr->maxStackDepth) > eePtr->stackEnd) {
GrowEvaluationStack(eePtr);
stackPtr = eePtr->stackPtr;
}
/*
* Loop executing instructions until a "done" instruction, a
* TCL_RETURN, or some error.
*/
goto cleanup0;
/*
* Targets for standard instruction endings; unrolled
* for speed in the most frequent cases (instructions that
* consume up to two stack elements).
*
* This used to be a "for(;;)" loop, with each instruction doing
* its own cleanup.
*/
cleanupV_pushObjResultPtr:
switch (cleanup) {
case 0:
stackPtr[++stackTop] = (objResultPtr);
goto cleanup0;
default:
cleanup -= 2;
while (cleanup--) {
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
}
case 2:
cleanup2_pushObjResultPtr:
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
case 1:
cleanup1_pushObjResultPtr:
valuePtr = stackPtr[stackTop];
TclDecrRefCount(valuePtr);
}
stackPtr[stackTop] = objResultPtr;
goto cleanup0;
cleanupV:
switch (cleanup) {
default:
cleanup -= 2;
while (cleanup--) {
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
}
case 2:
cleanup2:
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
case 1:
cleanup1:
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
case 0:
/*
* We really want to do nothing now, but this is needed
* for some compilers (SunPro CC)
*/
break;
}
cleanup0:
#ifdef TCL_COMPILE_DEBUG
ValidatePcAndStackTop(codePtr, pc, stackTop, initStackTop);
if (traceInstructions) {
fprintf(stdout, "%2d: %2d ", iPtr->numLevels, stackTop);
TclPrintInstruction(codePtr, pc);
fflush(stdout);
}
#endif /* TCL_COMPILE_DEBUG */
#ifdef TCL_COMPILE_STATS
iPtr->stats.instructionCount[*pc]++;
#endif
switch (*pc) {
case INST_DONE:
if (stackTop <= initStackTop) {
stackTop--;
goto abnormalReturn;
}
/*
* Set the interpreter's object result to point to the
* topmost object from the stack, and check for a possible
* [catch]. The stackTop's level and refCount will be handled
* by "processCatch" or "abnormalReturn".
*/
valuePtr = stackPtr[stackTop];
Tcl_SetObjResult(interp, valuePtr);
#ifdef TCL_COMPILE_DEBUG
TRACE_WITH_OBJ(("=> return code=%d, result=", result),
iPtr->objResultPtr);
if (traceInstructions) {
fprintf(stdout, "\n");
}
#endif
goto checkForCatch;
case INST_PUSH1:
objResultPtr = codePtr->objArrayPtr[TclGetUInt1AtPtr(pc+1)];
TRACE_WITH_OBJ(("%u => ", TclGetInt1AtPtr(pc+1)), objResultPtr);
NEXT_INST_F(2, 0, 1);
case INST_PUSH4:
objResultPtr = codePtr->objArrayPtr[TclGetUInt4AtPtr(pc+1)];
TRACE_WITH_OBJ(("%u => ", TclGetUInt4AtPtr(pc+1)), objResultPtr);
NEXT_INST_F(5, 0, 1);
case INST_POP:
TRACE_WITH_OBJ(("=> discarding "), stackPtr[stackTop]);
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
NEXT_INST_F(1, 0, 0);
case INST_DUP:
objResultPtr = stackPtr[stackTop];
TRACE_WITH_OBJ(("=> "), objResultPtr);
NEXT_INST_F(1, 0, 1);
case INST_OVER:
opnd = TclGetUInt4AtPtr( pc+1 );
objResultPtr = stackPtr[ stackTop - opnd ];
TRACE_WITH_OBJ(("=> "), objResultPtr);
NEXT_INST_F(5, 0, 1);
case INST_CONCAT1:
opnd = TclGetUInt1AtPtr(pc+1);
{
int totalLen = 0;
/*
* Concatenate strings (with no separators) from the top
* opnd items on the stack starting with the deepest item.
* First, determine how many characters are needed.
*/
for (i = (stackTop - (opnd-1)); i <= stackTop; i++) {
bytes = Tcl_GetStringFromObj(stackPtr[i], &length);
if (bytes != NULL) {
totalLen += length;
}
}
/*
* Initialize the new append string object by appending the
* strings of the opnd stack objects. Also pop the objects.
*/
TclNewObj(objResultPtr);
if (totalLen > 0) {
char *p = (char *) ckalloc((unsigned) (totalLen + 1));
objResultPtr->bytes = p;
objResultPtr->length = totalLen;
for (i = (stackTop - (opnd-1)); i <= stackTop; i++) {
valuePtr = stackPtr[i];
bytes = Tcl_GetStringFromObj(valuePtr, &length);
if (bytes != NULL) {
memcpy((VOID *) p, (VOID *) bytes,
(size_t) length);
p += length;
}
}
*p = '\0';
}
TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr);
NEXT_INST_V(2, opnd, 1);
}
case INST_INVOKE_STK4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
goto doInvocation;
case INST_INVOKE_STK1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
doInvocation:
{
int objc = opnd; /* The number of arguments. */
Tcl_Obj **objv; /* The array of argument objects. */
/*
* We keep the stack reference count as a (char *), as that
* works nicely as a portable pointer-sized counter.
*/
char **preservedStackRefCountPtr;
/*
* Reference to memory block containing
* objv array (must be kept live throughout
* trace and command invokations.)
*/
objv = &(stackPtr[stackTop - (objc-1)]);
#ifdef TCL_COMPILE_DEBUG
if (tclTraceExec >= 2) {
if (traceInstructions) {
strncpy(cmdNameBuf, TclGetString(objv[0]), 20);
TRACE(("%u => call ", objc));
} else {
fprintf(stdout, "%d: (%u) invoking ",
iPtr->numLevels,
(unsigned int)(pc - codePtr->codeStart));
}
for (i = 0; i < objc; i++) {
TclPrintObject(stdout, objv[i], 15);
fprintf(stdout, " ");
}
fprintf(stdout, "\n");
fflush(stdout);
}
#endif /*TCL_COMPILE_DEBUG*/
/*
* If trace procedures will be called, we need a
* command string to pass to TclEvalObjvInternal; note
* that a copy of the string will be made there to
* include the ending \0.
*/
bytes = NULL;
length = 0;
if (iPtr->tracePtr != NULL) {
Trace *tracePtr, *nextTracePtr;
for (tracePtr = iPtr->tracePtr; tracePtr != NULL;
tracePtr = nextTracePtr) {
nextTracePtr = tracePtr->nextPtr;
if (tracePtr->level == 0 ||
iPtr->numLevels <= tracePtr->level) {
/*
* Traces will be called: get command string
*/
bytes = GetSrcInfoForPc(pc, codePtr, &length);
break;
}
}
} else {
Command *cmdPtr;
cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, objv[0]);
if ((cmdPtr != NULL) && (cmdPtr->flags & CMD_HAS_EXEC_TRACES)) {
bytes = GetSrcInfoForPc(pc, codePtr, &length);
}
}
/*
* A reference to part of the stack vector itself
* escapes our control: increase its refCount
* to stop it from being deallocated by a recursive
* call to ourselves. The extra variable is needed
* because all others are liable to change due to the
* trace procedures.
*/
preservedStackRefCountPtr = (char **) (stackPtr-1);
++*preservedStackRefCountPtr;
/*
* Finally, let TclEvalObjvInternal handle the command.
*/
DECACHE_STACK_INFO();
Tcl_ResetResult(interp);
result = TclEvalObjvInternal(interp, objc, objv, bytes, length, 0);
CACHE_STACK_INFO();
/*
* If the old stack is going to be released, it is
* safe to do so now, since no references to objv are
* going to be used from now on.
*/
--*preservedStackRefCountPtr;
if (*preservedStackRefCountPtr == (char *) 0) {
ckfree((VOID *) preservedStackRefCountPtr);
}
if (result == TCL_OK) {
/*
* Push the call's object result and continue execution
* with the next instruction.
*/
TRACE_WITH_OBJ(("%u => ... after \"%.20s\": TCL_OK, result=",
objc, cmdNameBuf), Tcl_GetObjResult(interp));
objResultPtr = Tcl_GetObjResult(interp);
/*
* Reset the interp's result to avoid possible duplications
* of large objects [Bug 781585]. We do not call
* Tcl_ResetResult() to avoid any side effects caused by
* the resetting of errorInfo and errorCode [Bug 804681],
* which are not needed here. We chose instead to manipulate
* the interp's object result directly.
*
* Note that the result object is now in objResultPtr, it
* keeps the refCount it had in its role of iPtr->objResultPtr.
*/
{
Tcl_Obj *newObjResultPtr;
TclNewObj(newObjResultPtr);
Tcl_IncrRefCount(newObjResultPtr);
iPtr->objResultPtr = newObjResultPtr;
}
NEXT_INST_V(pcAdjustment, opnd, -1);
} else {
cleanup = opnd;
goto processExceptionReturn;
}
}
case INST_EVAL_STK:
/*
* Note to maintainers: it is important that INST_EVAL_STK
* pop its argument from the stack before jumping to
* checkForCatch! DO NOT OPTIMISE!
*/
objPtr = stackPtr[stackTop];
DECACHE_STACK_INFO();
result = TclCompEvalObj(interp, objPtr);
CACHE_STACK_INFO();
if (result == TCL_OK) {
/*
* Normal return; push the eval's object result.
*/
objResultPtr = Tcl_GetObjResult(interp);
TRACE_WITH_OBJ(("\"%.30s\" => ", O2S(objPtr)),
Tcl_GetObjResult(interp));
/*
* Reset the interp's result to avoid possible duplications
* of large objects [Bug 781585]. We do not call
* Tcl_ResetResult() to avoid any side effects caused by
* the resetting of errorInfo and errorCode [Bug 804681],
* which are not needed here. We chose instead to manipulate
* the interp's object result directly.
*
* Note that the result object is now in objResultPtr, it
* keeps the refCount it had in its role of iPtr->objResultPtr.
*/
{
Tcl_Obj *newObjResultPtr;
TclNewObj(newObjResultPtr);
Tcl_IncrRefCount(newObjResultPtr);
iPtr->objResultPtr = newObjResultPtr;
}
NEXT_INST_F(1, 1, -1);
} else {
cleanup = 1;
goto processExceptionReturn;
}
case INST_EXPR_STK:
objPtr = stackPtr[stackTop];
DECACHE_STACK_INFO();
Tcl_ResetResult(interp);
result = Tcl_ExprObj(interp, objPtr, &valuePtr);
CACHE_STACK_INFO();
if (result != TCL_OK) {
TRACE_WITH_OBJ(("\"%.30s\" => ERROR: ",
O2S(objPtr)), Tcl_GetObjResult(interp));
goto checkForCatch;
}
objResultPtr = valuePtr;
TRACE_WITH_OBJ(("\"%.30s\" => ", O2S(objPtr)), valuePtr);
NEXT_INST_F(1, 1, -1); /* already has right refct */
/*
* ---------------------------------------------------------
* Start of INST_LOAD instructions.
*
* WARNING: more 'goto' here than your doctor recommended!
* The different instructions set the value of some variables
* and then jump to somme common execution code.
*/
case INST_LOAD_SCALAR1:
opnd = TclGetUInt1AtPtr(pc+1);
varPtr = &(varFramePtr->compiledLocals[opnd]);
part1 = varPtr->name;
while (TclIsVarLink(varPtr)) {
varPtr = varPtr->value.linkPtr;
}
TRACE(("%u => ", opnd));
if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr)
&& (varPtr->tracePtr == NULL)) {
/*
* No errors, no traces: just get the value.
*/
objResultPtr = varPtr->value.objPtr;
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
NEXT_INST_F(2, 0, 1);
}
pcAdjustment = 2;
cleanup = 0;
arrayPtr = NULL;
part2 = NULL;
goto doCallPtrGetVar;
case INST_LOAD_SCALAR4:
opnd = TclGetUInt4AtPtr(pc+1);
varPtr = &(varFramePtr->compiledLocals[opnd]);
part1 = varPtr->name;
while (TclIsVarLink(varPtr)) {
varPtr = varPtr->value.linkPtr;
}
TRACE(("%u => ", opnd));
if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr)
&& (varPtr->tracePtr == NULL)) {
/*
* No errors, no traces: just get the value.
*/
objResultPtr = varPtr->value.objPtr;
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
NEXT_INST_F(5, 0, 1);
}
pcAdjustment = 5;
cleanup = 0;
arrayPtr = NULL;
part2 = NULL;
goto doCallPtrGetVar;
case INST_LOAD_ARRAY_STK:
cleanup = 2;
part2 = Tcl_GetString(stackPtr[stackTop]); /* element name */
objPtr = stackPtr[stackTop-1]; /* array name */
TRACE(("\"%.30s(%.30s)\" => ", O2S(objPtr), part2));
goto doLoadStk;
case INST_LOAD_STK:
case INST_LOAD_SCALAR_STK:
cleanup = 1;
part2 = NULL;
objPtr = stackPtr[stackTop]; /* variable name */
TRACE(("\"%.30s\" => ", O2S(objPtr)));
doLoadStk:
part1 = TclGetString(objPtr);
varPtr = TclObjLookupVar(interp, objPtr, part2,
TCL_LEAVE_ERR_MSG, "read",
/*createPart1*/ 0,
/*createPart2*/ 1, &arrayPtr);
if (varPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr)
&& (varPtr->tracePtr == NULL)
&& ((arrayPtr == NULL)
|| (arrayPtr->tracePtr == NULL))) {
/*
* No errors, no traces: just get the value.
*/
objResultPtr = varPtr->value.objPtr;
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
NEXT_INST_V(1, cleanup, 1);
}
pcAdjustment = 1;
goto doCallPtrGetVar;
case INST_LOAD_ARRAY4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
goto doLoadArray;
case INST_LOAD_ARRAY1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
doLoadArray:
part2 = TclGetString(stackPtr[stackTop]);
arrayPtr = &(varFramePtr->compiledLocals[opnd]);
part1 = arrayPtr->name;
while (TclIsVarLink(arrayPtr)) {
arrayPtr = arrayPtr->value.linkPtr;
}
TRACE(("%u \"%.30s\" => ", opnd, part2));
varPtr = TclLookupArrayElement(interp, part1, part2,
TCL_LEAVE_ERR_MSG, "read", 0, 1, arrayPtr);
if (varPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr)
&& (varPtr->tracePtr == NULL)
&& ((arrayPtr == NULL)
|| (arrayPtr->tracePtr == NULL))) {
/*
* No errors, no traces: just get the value.
*/
objResultPtr = varPtr->value.objPtr;
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
NEXT_INST_F(pcAdjustment, 1, 1);
}
cleanup = 1;
goto doCallPtrGetVar;
doCallPtrGetVar:
/*
* There are either errors or the variable is traced:
* call TclPtrGetVar to process fully.
*/
DECACHE_STACK_INFO();
objResultPtr = TclPtrGetVar(interp, varPtr, arrayPtr, part1,
part2, TCL_LEAVE_ERR_MSG);
CACHE_STACK_INFO();
if (objResultPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
NEXT_INST_V(pcAdjustment, cleanup, 1);
/*
* End of INST_LOAD instructions.
* ---------------------------------------------------------
*/
/*
* ---------------------------------------------------------
* Start of INST_STORE and related instructions.
*
* WARNING: more 'goto' here than your doctor recommended!
* The different instructions set the value of some variables
* and then jump to somme common execution code.
*/
case INST_LAPPEND_STK:
valuePtr = stackPtr[stackTop]; /* value to append */
part2 = NULL;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE
| TCL_LIST_ELEMENT | TCL_TRACE_READS);
goto doStoreStk;
case INST_LAPPEND_ARRAY_STK:
valuePtr = stackPtr[stackTop]; /* value to append */
part2 = TclGetString(stackPtr[stackTop - 1]);
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE
| TCL_LIST_ELEMENT | TCL_TRACE_READS);
goto doStoreStk;
case INST_APPEND_STK:
valuePtr = stackPtr[stackTop]; /* value to append */
part2 = NULL;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE);
goto doStoreStk;
case INST_APPEND_ARRAY_STK:
valuePtr = stackPtr[stackTop]; /* value to append */
part2 = TclGetString(stackPtr[stackTop - 1]);
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE);
goto doStoreStk;
case INST_STORE_ARRAY_STK:
valuePtr = stackPtr[stackTop];
part2 = TclGetString(stackPtr[stackTop - 1]);
storeFlags = TCL_LEAVE_ERR_MSG;
goto doStoreStk;
case INST_STORE_STK:
case INST_STORE_SCALAR_STK:
valuePtr = stackPtr[stackTop];
part2 = NULL;
storeFlags = TCL_LEAVE_ERR_MSG;
doStoreStk:
objPtr = stackPtr[stackTop - 1 - (part2 != NULL)]; /* variable name */
part1 = TclGetString(objPtr);
#ifdef TCL_COMPILE_DEBUG
if (part2 == NULL) {
TRACE(("\"%.30s\" <- \"%.30s\" =>",
part1, O2S(valuePtr)));
} else {
TRACE(("\"%.30s(%.30s)\" <- \"%.30s\" => ",
part1, part2, O2S(valuePtr)));
}
#endif
varPtr = TclObjLookupVar(interp, objPtr, part2,
TCL_LEAVE_ERR_MSG, "set",
/*createPart1*/ 1,
/*createPart2*/ 1, &arrayPtr);
if (varPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
cleanup = ((part2 == NULL)? 2 : 3);
pcAdjustment = 1;
goto doCallPtrSetVar;
case INST_LAPPEND_ARRAY4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE
| TCL_LIST_ELEMENT | TCL_TRACE_READS);
goto doStoreArray;
case INST_LAPPEND_ARRAY1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE
| TCL_LIST_ELEMENT | TCL_TRACE_READS);
goto doStoreArray;
case INST_APPEND_ARRAY4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE);
goto doStoreArray;
case INST_APPEND_ARRAY1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE);
goto doStoreArray;
case INST_STORE_ARRAY4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
storeFlags = TCL_LEAVE_ERR_MSG;
goto doStoreArray;
case INST_STORE_ARRAY1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
storeFlags = TCL_LEAVE_ERR_MSG;
doStoreArray:
valuePtr = stackPtr[stackTop];
part2 = TclGetString(stackPtr[stackTop - 1]);
arrayPtr = &(varFramePtr->compiledLocals[opnd]);
part1 = arrayPtr->name;
TRACE(("%u \"%.30s\" <- \"%.30s\" => ",
opnd, part2, O2S(valuePtr)));
while (TclIsVarLink(arrayPtr)) {
arrayPtr = arrayPtr->value.linkPtr;
}
varPtr = TclLookupArrayElement(interp, part1, part2,
TCL_LEAVE_ERR_MSG, "set", 1, 1, arrayPtr);
if (varPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
cleanup = 2;
goto doCallPtrSetVar;
case INST_LAPPEND_SCALAR4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE
| TCL_LIST_ELEMENT | TCL_TRACE_READS);
goto doStoreScalar;
case INST_LAPPEND_SCALAR1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE
| TCL_LIST_ELEMENT | TCL_TRACE_READS);
goto doStoreScalar;
case INST_APPEND_SCALAR4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE);
goto doStoreScalar;
case INST_APPEND_SCALAR1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE);
goto doStoreScalar;
case INST_STORE_SCALAR4:
opnd = TclGetUInt4AtPtr(pc+1);
pcAdjustment = 5;
storeFlags = TCL_LEAVE_ERR_MSG;
goto doStoreScalar;
case INST_STORE_SCALAR1:
opnd = TclGetUInt1AtPtr(pc+1);
pcAdjustment = 2;
storeFlags = TCL_LEAVE_ERR_MSG;
doStoreScalar:
valuePtr = stackPtr[stackTop];
varPtr = &(varFramePtr->compiledLocals[opnd]);
part1 = varPtr->name;
TRACE(("%u <- \"%.30s\" => ", opnd, O2S(valuePtr)));
while (TclIsVarLink(varPtr)) {
varPtr = varPtr->value.linkPtr;
}
cleanup = 1;
arrayPtr = NULL;
part2 = NULL;
doCallPtrSetVar:
if ((storeFlags == TCL_LEAVE_ERR_MSG)
&& !((varPtr->flags & VAR_IN_HASHTABLE)
&& (varPtr->hPtr == NULL))
&& (varPtr->tracePtr == NULL)
&& (TclIsVarScalar(varPtr)
|| TclIsVarUndefined(varPtr))
&& ((arrayPtr == NULL)
|| (arrayPtr->tracePtr == NULL))) {
/*
* No traces, no errors, plain 'set': we can safely inline.
* The value *will* be set to what's requested, so that
* the stack top remains pointing to the same Tcl_Obj.
*/
valuePtr = varPtr->value.objPtr;
objResultPtr = stackPtr[stackTop];
if (valuePtr != objResultPtr) {
if (valuePtr != NULL) {
TclDecrRefCount(valuePtr);
} else {
TclSetVarScalar(varPtr);
TclClearVarUndefined(varPtr);
}
varPtr->value.objPtr = objResultPtr;
Tcl_IncrRefCount(objResultPtr);
}
#ifndef TCL_COMPILE_DEBUG
if (*(pc+pcAdjustment) == INST_POP) {
NEXT_INST_V((pcAdjustment+1), cleanup, 0);
}
#else
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
#endif
NEXT_INST_V(pcAdjustment, cleanup, 1);
} else {
DECACHE_STACK_INFO();
objResultPtr = TclPtrSetVar(interp, varPtr, arrayPtr,
part1, part2, valuePtr, storeFlags);
CACHE_STACK_INFO();
if (objResultPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
}
#ifndef TCL_COMPILE_DEBUG
if (*(pc+pcAdjustment) == INST_POP) {
NEXT_INST_V((pcAdjustment+1), cleanup, 0);
}
#endif
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
NEXT_INST_V(pcAdjustment, cleanup, 1);
/*
* End of INST_STORE and related instructions.
* ---------------------------------------------------------
*/
/*
* ---------------------------------------------------------
* Start of INST_INCR instructions.
*
* WARNING: more 'goto' here than your doctor recommended!
* The different instructions set the value of some variables
* and then jump to somme common execution code.
*/
case INST_INCR_SCALAR1:
case INST_INCR_ARRAY1:
case INST_INCR_ARRAY_STK:
case INST_INCR_SCALAR_STK:
case INST_INCR_STK:
opnd = TclGetUInt1AtPtr(pc+1);
valuePtr = stackPtr[stackTop];
if (valuePtr->typePtr == &tclIntType) {
i = valuePtr->internalRep.longValue;
} else if (valuePtr->typePtr == &tclWideIntType) {
TclGetLongFromWide(i,valuePtr);
} else {
REQUIRE_WIDE_OR_INT(result, valuePtr, i, w);
if (result != TCL_OK) {
TRACE_WITH_OBJ(("%u (by %s) => ERROR converting increment amount to int: ",
opnd, O2S(valuePtr)), Tcl_GetObjResult(interp));
DECACHE_STACK_INFO();
Tcl_AddErrorInfo(interp, "\n (reading increment)");
CACHE_STACK_INFO();
goto checkForCatch;
}
FORCE_LONG(valuePtr, i, w);
}
stackTop--;
TclDecrRefCount(valuePtr);
switch (*pc) {
case INST_INCR_SCALAR1:
pcAdjustment = 2;
goto doIncrScalar;
case INST_INCR_ARRAY1:
pcAdjustment = 2;
goto doIncrArray;
default:
pcAdjustment = 1;
goto doIncrStk;
}
case INST_INCR_ARRAY_STK_IMM:
case INST_INCR_SCALAR_STK_IMM:
case INST_INCR_STK_IMM:
i = TclGetInt1AtPtr(pc+1);
pcAdjustment = 2;
doIncrStk:
if ((*pc == INST_INCR_ARRAY_STK_IMM)
|| (*pc == INST_INCR_ARRAY_STK)) {
part2 = TclGetString(stackPtr[stackTop]);
objPtr = stackPtr[stackTop - 1];
TRACE(("\"%.30s(%.30s)\" (by %ld) => ",
O2S(objPtr), part2, i));
} else {
part2 = NULL;
objPtr = stackPtr[stackTop];
TRACE(("\"%.30s\" (by %ld) => ", O2S(objPtr), i));
}
part1 = TclGetString(objPtr);
varPtr = TclObjLookupVar(interp, objPtr, part2,
TCL_LEAVE_ERR_MSG, "read", 0, 1, &arrayPtr);
if (varPtr == NULL) {
DECACHE_STACK_INFO();
Tcl_AddObjErrorInfo(interp,
"\n (reading value of variable to increment)", -1);
CACHE_STACK_INFO();
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
cleanup = ((part2 == NULL)? 1 : 2);
goto doIncrVar;
case INST_INCR_ARRAY1_IMM:
opnd = TclGetUInt1AtPtr(pc+1);
i = TclGetInt1AtPtr(pc+2);
pcAdjustment = 3;
doIncrArray:
part2 = TclGetString(stackPtr[stackTop]);
arrayPtr = &(varFramePtr->compiledLocals[opnd]);
part1 = arrayPtr->name;
while (TclIsVarLink(arrayPtr)) {
arrayPtr = arrayPtr->value.linkPtr;
}
TRACE(("%u \"%.30s\" (by %ld) => ",
opnd, part2, i));
varPtr = TclLookupArrayElement(interp, part1, part2,
TCL_LEAVE_ERR_MSG, "read", 0, 1, arrayPtr);
if (varPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
cleanup = 1;
goto doIncrVar;
case INST_INCR_SCALAR1_IMM:
opnd = TclGetUInt1AtPtr(pc+1);
i = TclGetInt1AtPtr(pc+2);
pcAdjustment = 3;
doIncrScalar:
varPtr = &(varFramePtr->compiledLocals[opnd]);
part1 = varPtr->name;
while (TclIsVarLink(varPtr)) {
varPtr = varPtr->value.linkPtr;
}
arrayPtr = NULL;
part2 = NULL;
cleanup = 0;
TRACE(("%u %ld => ", opnd, i));
doIncrVar:
objPtr = varPtr->value.objPtr;
if (TclIsVarScalar(varPtr)
&& !TclIsVarUndefined(varPtr)
&& (varPtr->tracePtr == NULL)
&& ((arrayPtr == NULL)
|| (arrayPtr->tracePtr == NULL))
&& (objPtr->typePtr == &tclIntType)) {
/*
* No errors, no traces, the variable already has an
* integer value: inline processing.
*/
i += objPtr->internalRep.longValue;
if (Tcl_IsShared(objPtr)) {
objResultPtr = Tcl_NewLongObj(i);
TclDecrRefCount(objPtr);
Tcl_IncrRefCount(objResultPtr);
varPtr->value.objPtr = objResultPtr;
} else {
Tcl_SetLongObj(objPtr, i);
objResultPtr = objPtr;
}
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
} else {
DECACHE_STACK_INFO();
objResultPtr = TclPtrIncrVar(interp, varPtr, arrayPtr, part1,
part2, i, TCL_LEAVE_ERR_MSG);
CACHE_STACK_INFO();
if (objResultPtr == NULL) {
TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp))));
result = TCL_ERROR;
goto checkForCatch;
}
}
TRACE_APPEND(("%.30s\n", O2S(objResultPtr)));
#ifndef TCL_COMPILE_DEBUG
if (*(pc+pcAdjustment) == INST_POP) {
NEXT_INST_V((pcAdjustment+1), cleanup, 0);
}
#endif
NEXT_INST_V(pcAdjustment, cleanup, 1);
/*
* End of INST_INCR instructions.
* ---------------------------------------------------------
*/
case INST_JUMP1:
opnd = TclGetInt1AtPtr(pc+1);
TRACE(("%d => new pc %u\n", opnd,
(unsigned int)(pc + opnd - codePtr->codeStart)));
NEXT_INST_F(opnd, 0, 0);
case INST_JUMP4:
opnd = TclGetInt4AtPtr(pc+1);
TRACE(("%d => new pc %u\n", opnd,
(unsigned int)(pc + opnd - codePtr->codeStart)));
NEXT_INST_F(opnd, 0, 0);
case INST_JUMP_FALSE4:
opnd = 5; /* TRUE */
pcAdjustment = TclGetInt4AtPtr(pc+1); /* FALSE */
goto doJumpTrue;
case INST_JUMP_TRUE4:
opnd = TclGetInt4AtPtr(pc+1); /* TRUE */
pcAdjustment = 5; /* FALSE */
goto doJumpTrue;
case INST_JUMP_FALSE1:
opnd = 2; /* TRUE */
pcAdjustment = TclGetInt1AtPtr(pc+1); /* FALSE */
goto doJumpTrue;
case INST_JUMP_TRUE1:
opnd = TclGetInt1AtPtr(pc+1); /* TRUE */
pcAdjustment = 2; /* FALSE */
doJumpTrue:
{
int b;
valuePtr = stackPtr[stackTop];
if (valuePtr->typePtr == &tclIntType) {
b = (valuePtr->internalRep.longValue != 0);
} else if (valuePtr->typePtr == &tclDoubleType) {
b = (valuePtr->internalRep.doubleValue != 0.0);
} else if (valuePtr->typePtr == &tclWideIntType) {
TclGetWide(w,valuePtr);
b = (w != W0);
} else {
result = Tcl_GetBooleanFromObj(interp, valuePtr, &b);
if (result != TCL_OK) {
TRACE_WITH_OBJ(("%d => ERROR: ", opnd), Tcl_GetObjResult(interp));
goto checkForCatch;
}
}
#ifndef TCL_COMPILE_DEBUG
NEXT_INST_F((b? opnd : pcAdjustment), 1, 0);
#else
if (b) {
if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE1)) {
TRACE(("%d => %.20s true, new pc %u\n", opnd, O2S(valuePtr),
(unsigned int)(pc+opnd - codePtr->codeStart)));
} else {
TRACE(("%d => %.20s true\n", pcAdjustment, O2S(valuePtr)));
}
NEXT_INST_F(opnd, 1, 0);
} else {
if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE1)) {
TRACE(("%d => %.20s false\n", opnd, O2S(valuePtr)));
} else {
opnd = pcAdjustment;
TRACE(("%d => %.20s false, new pc %u\n", opnd, O2S(valuePtr),
(unsigned int)(pc + opnd - codePtr->codeStart)));
}
NEXT_INST_F(pcAdjustment, 1, 0);
}
#endif
}
case INST_LOR:
case INST_LAND:
{
/*
* Operands must be boolean or numeric. No int->double
* conversions are performed.
*/
int i1, i2;
int iResult;
char *s;
Tcl_ObjType *t1Ptr, *t2Ptr;
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop - 1];;
t1Ptr = valuePtr->typePtr;
t2Ptr = value2Ptr->typePtr;
if ((t1Ptr == &tclIntType) || (t1Ptr == &tclBooleanType)) {
i1 = (valuePtr->internalRep.longValue != 0);
} else if (t1Ptr == &tclWideIntType) {
TclGetWide(w,valuePtr);
i1 = (w != W0);
} else if (t1Ptr == &tclDoubleType) {
i1 = (valuePtr->internalRep.doubleValue != 0.0);
} else {
s = Tcl_GetStringFromObj(valuePtr, &length);
if (TclLooksLikeInt(s, length)) {
GET_WIDE_OR_INT(result, valuePtr, i, w);
if (valuePtr->typePtr == &tclIntType) {
i1 = (i != 0);
} else {
i1 = (w != W0);
}
} else {
result = Tcl_GetBooleanFromObj((Tcl_Interp *) NULL,
valuePtr, &i1);
i1 = (i1 != 0);
}
if (result != TCL_OK) {
TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr),
(t1Ptr? t1Ptr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, valuePtr);
CACHE_STACK_INFO();
goto checkForCatch;
}
}
if ((t2Ptr == &tclIntType) || (t2Ptr == &tclBooleanType)) {
i2 = (value2Ptr->internalRep.longValue != 0);
} else if (t2Ptr == &tclWideIntType) {
TclGetWide(w,value2Ptr);
i2 = (w != W0);
} else if (t2Ptr == &tclDoubleType) {
i2 = (value2Ptr->internalRep.doubleValue != 0.0);
} else {
s = Tcl_GetStringFromObj(value2Ptr, &length);
if (TclLooksLikeInt(s, length)) {
GET_WIDE_OR_INT(result, value2Ptr, i, w);
if (value2Ptr->typePtr == &tclIntType) {
i2 = (i != 0);
} else {
i2 = (w != W0);
}
} else {
result = Tcl_GetBooleanFromObj((Tcl_Interp *) NULL, value2Ptr, &i2);
}
if (result != TCL_OK) {
TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(value2Ptr),
(t2Ptr? t2Ptr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, value2Ptr);
CACHE_STACK_INFO();
goto checkForCatch;
}
}
/*
* Reuse the valuePtr object already on stack if possible.
*/
if (*pc == INST_LOR) {
iResult = (i1 || i2);
} else {
iResult = (i1 && i2);
}
if (Tcl_IsShared(valuePtr)) {
objResultPtr = Tcl_NewLongObj(iResult);
TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult));
NEXT_INST_F(1, 2, 1);
} else { /* reuse the valuePtr object */
TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult));
Tcl_SetLongObj(valuePtr, iResult);
NEXT_INST_F(1, 1, 0);
}
}
/*
* ---------------------------------------------------------
* Start of INST_LIST and related instructions.
*/
case INST_LIST:
/*
* Pop the opnd (objc) top stack elements into a new list obj
* and then decrement their ref counts.
*/
opnd = TclGetUInt4AtPtr(pc+1);
objResultPtr = Tcl_NewListObj(opnd, &(stackPtr[stackTop - (opnd-1)]));
TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr);
NEXT_INST_V(5, opnd, 1);
case INST_LIST_LENGTH:
valuePtr = stackPtr[stackTop];
result = Tcl_ListObjLength(interp, valuePtr, &length);
if (result != TCL_OK) {
TRACE_WITH_OBJ(("%.30s => ERROR: ", O2S(valuePtr)),
Tcl_GetObjResult(interp));
goto checkForCatch;
}
objResultPtr = Tcl_NewIntObj(length);
TRACE(("%.20s => %d\n", O2S(valuePtr), length));
NEXT_INST_F(1, 1, 1);
case INST_LIST_INDEX:
/*** lindex with objc == 3 ***/
/*
* Pop the two operands
*/
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop- 1];
/*
* Extract the desired list element
*/
objResultPtr = TclLindexList(interp, valuePtr, value2Ptr);
if (objResultPtr == NULL) {
TRACE_WITH_OBJ(("%.30s %.30s => ERROR: ", O2S(valuePtr), O2S(value2Ptr)),
Tcl_GetObjResult(interp));
result = TCL_ERROR;
goto checkForCatch;
}
/*
* Stash the list element on the stack
*/
TRACE(("%.20s %.20s => %s\n",
O2S(valuePtr), O2S(value2Ptr), O2S(objResultPtr)));
NEXT_INST_F(1, 2, -1); /* already has the correct refCount */
case INST_LIST_INDEX_MULTI:
{
/*
* 'lindex' with multiple index args:
*
* Determine the count of index args.
*/
int numIdx;
opnd = TclGetUInt4AtPtr(pc+1);
numIdx = opnd-1;
/*
* Do the 'lindex' operation.
*/
objResultPtr = TclLindexFlat(interp, stackPtr[stackTop - numIdx],
numIdx, stackPtr + stackTop - numIdx + 1);
/*
* Check for errors
*/
if (objResultPtr == NULL) {
TRACE_WITH_OBJ(("%d => ERROR: ", opnd), Tcl_GetObjResult(interp));
result = TCL_ERROR;
goto checkForCatch;
}
/*
* Set result
*/
TRACE(("%d => %s\n", opnd, O2S(objResultPtr)));
NEXT_INST_V(5, opnd, -1);
}
case INST_LSET_FLAT:
{
/*
* Lset with 3, 5, or more args. Get the number
* of index args.
*/
int numIdx;
opnd = TclGetUInt4AtPtr( pc + 1 );
numIdx = opnd - 2;
/*
* Get the old value of variable, and remove the stack ref.
* This is safe because the variable still references the
* object; the ref count will never go zero here.
*/
value2Ptr = POP_OBJECT();
TclDecrRefCount(value2Ptr); /* This one should be done here */
/*
* Get the new element value.
*/
valuePtr = stackPtr[stackTop];
/*
* Compute the new variable value
*/
objResultPtr = TclLsetFlat(interp, value2Ptr, numIdx,
stackPtr + stackTop - numIdx, valuePtr);
/*
* Check for errors
*/
if (objResultPtr == NULL) {
TRACE_WITH_OBJ(("%d => ERROR: ", opnd), Tcl_GetObjResult(interp));
result = TCL_ERROR;
goto checkForCatch;
}
/*
* Set result
*/
TRACE(("%d => %s\n", opnd, O2S(objResultPtr)));
NEXT_INST_V(5, (numIdx+1), -1);
}
case INST_LSET_LIST:
/*
* 'lset' with 4 args.
*
* Get the old value of variable, and remove the stack ref.
* This is safe because the variable still references the
* object; the ref count will never go zero here.
*/
objPtr = POP_OBJECT();
TclDecrRefCount(objPtr); /* This one should be done here */
/*
* Get the new element value, and the index list
*/
valuePtr = stackPtr[stackTop];
value2Ptr = stackPtr[stackTop - 1];
/*
* Compute the new variable value
*/
objResultPtr = TclLsetList(interp, objPtr, value2Ptr, valuePtr);
/*
* Check for errors
*/
if (objResultPtr == NULL) {
TRACE_WITH_OBJ(("\"%.30s\" => ERROR: ", O2S(value2Ptr)),
Tcl_GetObjResult(interp));
result = TCL_ERROR;
goto checkForCatch;
}
/*
* Set result
*/
TRACE(("=> %s\n", O2S(objResultPtr)));
NEXT_INST_F(1, 2, -1);
/*
* End of INST_LIST and related instructions.
* ---------------------------------------------------------
*/
case INST_STR_EQ:
case INST_STR_NEQ:
{
/*
* String (in)equality check
*/
int iResult;
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop - 1];
if (valuePtr == value2Ptr) {
/*
* On the off-chance that the objects are the same,
* we don't really have to think hard about equality.
*/
iResult = (*pc == INST_STR_EQ);
} else {
char *s1, *s2;
int s1len, s2len;
s1 = Tcl_GetStringFromObj(valuePtr, &s1len);
s2 = Tcl_GetStringFromObj(value2Ptr, &s2len);
if (s1len == s2len) {
/*
* We only need to check (in)equality when
* we have equal length strings.
*/
if (*pc == INST_STR_NEQ) {
iResult = (strcmp(s1, s2) != 0);
} else {
/* INST_STR_EQ */
iResult = (strcmp(s1, s2) == 0);
}
} else {
iResult = (*pc == INST_STR_NEQ);
}
}
TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult));
/*
* Peep-hole optimisation: if you're about to jump, do jump
* from here.
*/
pc++;
#ifndef TCL_COMPILE_DEBUG
switch (*pc) {
case INST_JUMP_FALSE1:
NEXT_INST_F((iResult? 2 : TclGetInt1AtPtr(pc+1)), 2, 0);
case INST_JUMP_TRUE1:
NEXT_INST_F((iResult? TclGetInt1AtPtr(pc+1) : 2), 2, 0);
case INST_JUMP_FALSE4:
NEXT_INST_F((iResult? 5 : TclGetInt4AtPtr(pc+1)), 2, 0);
case INST_JUMP_TRUE4:
NEXT_INST_F((iResult? TclGetInt4AtPtr(pc+1) : 5), 2, 0);
}
#endif
objResultPtr = Tcl_NewIntObj(iResult);
NEXT_INST_F(0, 2, 1);
}
case INST_STR_CMP:
{
/*
* String compare
*/
CONST char *s1, *s2;
int s1len, s2len, iResult;
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop - 1];
/*
* The comparison function should compare up to the
* minimum byte length only.
*/
if (valuePtr == value2Ptr) {
/*
* In the pure equality case, set lengths too for
* the checks below (or we could goto beyond it).
*/
iResult = s1len = s2len = 0;
} else if ((valuePtr->typePtr == &tclByteArrayType)
&& (value2Ptr->typePtr == &tclByteArrayType)) {
s1 = (char *) Tcl_GetByteArrayFromObj(valuePtr, &s1len);
s2 = (char *) Tcl_GetByteArrayFromObj(value2Ptr, &s2len);
iResult = memcmp(s1, s2,
(size_t) ((s1len < s2len) ? s1len : s2len));
} else if (((valuePtr->typePtr == &tclStringType)
&& (value2Ptr->typePtr == &tclStringType))) {
/*
* Do a unicode-specific comparison if both of the args are of
* String type. If the char length == byte length, we can do a
* memcmp. In benchmark testing this proved the most efficient
* check between the unicode and string comparison operations.
*/
s1len = Tcl_GetCharLength(valuePtr);
s2len = Tcl_GetCharLength(value2Ptr);
if ((s1len == valuePtr->length) && (s2len == value2Ptr->length)) {
iResult = memcmp(valuePtr->bytes, value2Ptr->bytes,
(unsigned) ((s1len < s2len) ? s1len : s2len));
} else {
iResult = TclUniCharNcmp(Tcl_GetUnicode(valuePtr),
Tcl_GetUnicode(value2Ptr),
(unsigned) ((s1len < s2len) ? s1len : s2len));
}
} else {
/*
* We can't do a simple memcmp in order to handle the
* special Tcl \xC0\x80 null encoding for utf-8.
*/
s1 = Tcl_GetStringFromObj(valuePtr, &s1len);
s2 = Tcl_GetStringFromObj(value2Ptr, &s2len);
iResult = TclpUtfNcmp2(s1, s2,
(size_t) ((s1len < s2len) ? s1len : s2len));
}
/*
* Make sure only -1,0,1 is returned
*/
if (iResult == 0) {
iResult = s1len - s2len;
}
if (iResult < 0) {
iResult = -1;
} else if (iResult > 0) {
iResult = 1;
}
objResultPtr = Tcl_NewIntObj(iResult);
TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult));
NEXT_INST_F(1, 2, 1);
}
case INST_STR_LEN:
{
int length1;
valuePtr = stackPtr[stackTop];
if (valuePtr->typePtr == &tclByteArrayType) {
(void) Tcl_GetByteArrayFromObj(valuePtr, &length1);
} else {
length1 = Tcl_GetCharLength(valuePtr);
}
objResultPtr = Tcl_NewIntObj(length1);
TRACE(("%.20s => %d\n", O2S(valuePtr), length1));
NEXT_INST_F(1, 1, 1);
}
case INST_STR_INDEX:
{
/*
* String compare
*/
int index;
bytes = NULL; /* lint */
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop - 1];
/*
* If we have a ByteArray object, avoid indexing in the
* Utf string since the byte array contains one byte per
* character. Otherwise, use the Unicode string rep to
* get the index'th char.
*/
if (valuePtr->typePtr == &tclByteArrayType) {
bytes = (char *)Tcl_GetByteArrayFromObj(valuePtr, &length);
} else {
/*
* Get Unicode char length to calulate what 'end' means.
*/
length = Tcl_GetCharLength(valuePtr);
}
result = TclGetIntForIndex(interp, value2Ptr, length - 1, &index);
if (result != TCL_OK) {
goto checkForCatch;
}
if ((index >= 0) && (index < length)) {
if (valuePtr->typePtr == &tclByteArrayType) {
objResultPtr = Tcl_NewByteArrayObj((unsigned char *)
(&bytes[index]), 1);
} else if (valuePtr->bytes && length == valuePtr->length) {
objResultPtr = Tcl_NewStringObj((CONST char *)
(&valuePtr->bytes[index]), 1);
} else {
char buf[TCL_UTF_MAX];
Tcl_UniChar ch;
ch = Tcl_GetUniChar(valuePtr, index);
/*
* This could be:
* Tcl_NewUnicodeObj((CONST Tcl_UniChar *)&ch, 1)
* but creating the object as a string seems to be
* faster in practical use.
*/
length = Tcl_UniCharToUtf(ch, buf);
objResultPtr = Tcl_NewStringObj(buf, length);
}
} else {
TclNewObj(objResultPtr);
}
TRACE(("%.20s %.20s => %s\n", O2S(valuePtr), O2S(value2Ptr),
O2S(objResultPtr)));
NEXT_INST_F(1, 2, 1);
}
case INST_STR_MATCH:
{
int nocase, match;
nocase = TclGetInt1AtPtr(pc+1);
valuePtr = stackPtr[stackTop]; /* String */
value2Ptr = stackPtr[stackTop - 1]; /* Pattern */
/*
* Check that at least one of the objects is Unicode before
* promoting both.
*/
if ((valuePtr->typePtr == &tclStringType)
|| (value2Ptr->typePtr == &tclStringType)) {
Tcl_UniChar *ustring1, *ustring2;
int length1, length2;
ustring1 = Tcl_GetUnicodeFromObj(valuePtr, &length1);
ustring2 = Tcl_GetUnicodeFromObj(value2Ptr, &length2);
match = TclUniCharMatch(ustring1, length1, ustring2, length2,
nocase);
} else {
match = Tcl_StringCaseMatch(TclGetString(valuePtr),
TclGetString(value2Ptr), nocase);
}
/*
* Reuse value2Ptr object already on stack if possible.
* Adjustment is 2 due to the nocase byte
*/
TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), match));
if (Tcl_IsShared(value2Ptr)) {
objResultPtr = Tcl_NewIntObj(match);
NEXT_INST_F(2, 2, 1);
} else { /* reuse the valuePtr object */
Tcl_SetIntObj(value2Ptr, match);
NEXT_INST_F(2, 1, 0);
}
}
case INST_EQ:
case INST_NEQ:
case INST_LT:
case INST_GT:
case INST_LE:
case INST_GE:
{
/*
* Any type is allowed but the two operands must have the
* same type. We will compute value op value2.
*/
Tcl_ObjType *t1Ptr, *t2Ptr;
char *s1 = NULL; /* Init. avoids compiler warning. */
char *s2 = NULL; /* Init. avoids compiler warning. */
long i2 = 0; /* Init. avoids compiler warning. */
double d1 = 0.0; /* Init. avoids compiler warning. */
double d2 = 0.0; /* Init. avoids compiler warning. */
long iResult = 0; /* Init. avoids compiler warning. */
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop - 1];
if (valuePtr == value2Ptr) {
/*
* Optimize the equal object case.
*/
switch (*pc) {
case INST_EQ:
case INST_LE:
case INST_GE:
iResult = 1;
break;
case INST_NEQ:
case INST_LT:
case INST_GT:
iResult = 0;
break;
}
goto foundResult;
}
t1Ptr = valuePtr->typePtr;
t2Ptr = value2Ptr->typePtr;
/*
* We only want to coerce numeric validation if neither type
* is NULL. A NULL type means the arg is essentially an empty
* object ("", {} or [list]).
*/
if (!( (!t1Ptr && !valuePtr->bytes)
|| (valuePtr->bytes && !valuePtr->length)
|| (!t2Ptr && !value2Ptr->bytes)
|| (value2Ptr->bytes && !value2Ptr->length))) {
if (!IS_NUMERIC_TYPE(t1Ptr)) {
s1 = Tcl_GetStringFromObj(valuePtr, &length);
if (TclLooksLikeInt(s1, length)) {
GET_WIDE_OR_INT(iResult, valuePtr, i, w);
} else {
(void) Tcl_GetDoubleFromObj((Tcl_Interp *) NULL,
valuePtr, &d1);
}
t1Ptr = valuePtr->typePtr;
}
if (!IS_NUMERIC_TYPE(t2Ptr)) {
s2 = Tcl_GetStringFromObj(value2Ptr, &length);
if (TclLooksLikeInt(s2, length)) {
GET_WIDE_OR_INT(iResult, value2Ptr, i2, w);
} else {
(void) Tcl_GetDoubleFromObj((Tcl_Interp *) NULL,
value2Ptr, &d2);
}
t2Ptr = value2Ptr->typePtr;
}
}
if (!IS_NUMERIC_TYPE(t1Ptr) || !IS_NUMERIC_TYPE(t2Ptr)) {
/*
* One operand is not numeric. Compare as strings. NOTE:
* strcmp is not correct for \x00 < \x01, but that is
* unlikely to occur here. We could use the TclUtfNCmp2
* to handle this.
*/
int s1len, s2len;
s1 = Tcl_GetStringFromObj(valuePtr, &s1len);
s2 = Tcl_GetStringFromObj(value2Ptr, &s2len);
switch (*pc) {
case INST_EQ:
if (s1len == s2len) {
iResult = (strcmp(s1, s2) == 0);
} else {
iResult = 0;
}
break;
case INST_NEQ:
if (s1len == s2len) {
iResult = (strcmp(s1, s2) != 0);
} else {
iResult = 1;
}
break;
case INST_LT:
iResult = (strcmp(s1, s2) < 0);
break;
case INST_GT:
iResult = (strcmp(s1, s2) > 0);
break;
case INST_LE:
iResult = (strcmp(s1, s2) <= 0);
break;
case INST_GE:
iResult = (strcmp(s1, s2) >= 0);
break;
}
} else if ((t1Ptr == &tclDoubleType)
|| (t2Ptr == &tclDoubleType)) {
/*
* Compare as doubles.
*/
if (t1Ptr == &tclDoubleType) {
d1 = valuePtr->internalRep.doubleValue;
GET_DOUBLE_VALUE(d2, value2Ptr, t2Ptr);
} else { /* t1Ptr is integer, t2Ptr is double */
GET_DOUBLE_VALUE(d1, valuePtr, t1Ptr);
d2 = value2Ptr->internalRep.doubleValue;
}
switch (*pc) {
case INST_EQ:
iResult = d1 == d2;
break;
case INST_NEQ:
iResult = d1 != d2;
break;
case INST_LT:
iResult = d1 < d2;
break;
case INST_GT:
iResult = d1 > d2;
break;
case INST_LE:
iResult = d1 <= d2;
break;
case INST_GE:
iResult = d1 >= d2;
break;
}
} else if ((t1Ptr == &tclWideIntType)
|| (t2Ptr == &tclWideIntType)) {
Tcl_WideInt w2;
/*
* Compare as wide ints (neither are doubles)
*/
if (t1Ptr == &tclIntType) {
w = Tcl_LongAsWide(valuePtr->internalRep.longValue);
TclGetWide(w2,value2Ptr);
} else if (t2Ptr == &tclIntType) {
TclGetWide(w,valuePtr);
w2 = Tcl_LongAsWide(value2Ptr->internalRep.longValue);
} else {
TclGetWide(w,valuePtr);
TclGetWide(w2,value2Ptr);
}
switch (*pc) {
case INST_EQ:
iResult = w == w2;
break;
case INST_NEQ:
iResult = w != w2;
break;
case INST_LT:
iResult = w < w2;
break;
case INST_GT:
iResult = w > w2;
break;
case INST_LE:
iResult = w <= w2;
break;
case INST_GE:
iResult = w >= w2;
break;
}
} else {
/*
* Compare as ints.
*/
i = valuePtr->internalRep.longValue;
i2 = value2Ptr->internalRep.longValue;
switch (*pc) {
case INST_EQ:
iResult = i == i2;
break;
case INST_NEQ:
iResult = i != i2;
break;
case INST_LT:
iResult = i < i2;
break;
case INST_GT:
iResult = i > i2;
break;
case INST_LE:
iResult = i <= i2;
break;
case INST_GE:
iResult = i >= i2;
break;
}
}
foundResult:
TRACE(("%.20s %.20s => %ld\n", O2S(valuePtr), O2S(value2Ptr), iResult));
/*
* Peep-hole optimisation: if you're about to jump, do jump
* from here.
*/
pc++;
#ifndef TCL_COMPILE_DEBUG
switch (*pc) {
case INST_JUMP_FALSE1:
NEXT_INST_F((iResult? 2 : TclGetInt1AtPtr(pc+1)), 2, 0);
case INST_JUMP_TRUE1:
NEXT_INST_F((iResult? TclGetInt1AtPtr(pc+1) : 2), 2, 0);
case INST_JUMP_FALSE4:
NEXT_INST_F((iResult? 5 : TclGetInt4AtPtr(pc+1)), 2, 0);
case INST_JUMP_TRUE4:
NEXT_INST_F((iResult? TclGetInt4AtPtr(pc+1) : 5), 2, 0);
}
#endif
objResultPtr = Tcl_NewIntObj(iResult);
NEXT_INST_F(0, 2, 1);
}
case INST_MOD:
case INST_LSHIFT:
case INST_RSHIFT:
case INST_BITOR:
case INST_BITXOR:
case INST_BITAND:
{
/*
* Only integers are allowed. We compute value op value2.
*/
long i2 = 0, rem, negative;
long iResult = 0; /* Init. avoids compiler warning. */
Tcl_WideInt w2, wResult = W0;
int doWide = 0;
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop - 1];
if (valuePtr->typePtr == &tclIntType) {
i = valuePtr->internalRep.longValue;
} else if (valuePtr->typePtr == &tclWideIntType) {
TclGetWide(w,valuePtr);
} else { /* try to convert to int */
REQUIRE_WIDE_OR_INT(result, valuePtr, i, w);
if (result != TCL_OK) {
TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n",
O2S(valuePtr), O2S(value2Ptr),
(valuePtr->typePtr?
valuePtr->typePtr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, valuePtr);
CACHE_STACK_INFO();
goto checkForCatch;
}
}
if (value2Ptr->typePtr == &tclIntType) {
i2 = value2Ptr->internalRep.longValue;
} else if (value2Ptr->typePtr == &tclWideIntType) {
TclGetWide(w2,value2Ptr);
} else {
REQUIRE_WIDE_OR_INT(result, value2Ptr, i2, w2);
if (result != TCL_OK) {
TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n",
O2S(valuePtr), O2S(value2Ptr),
(value2Ptr->typePtr?
value2Ptr->typePtr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, value2Ptr);
CACHE_STACK_INFO();
goto checkForCatch;
}
}
switch (*pc) {
case INST_MOD:
/*
* This code is tricky: C doesn't guarantee much about
* the quotient or remainder, but Tcl does. The
* remainder always has the same sign as the divisor and
* a smaller absolute value.
*/
if (value2Ptr->typePtr == &tclWideIntType && w2 == W0) {
if (valuePtr->typePtr == &tclIntType) {
TRACE(("%ld "LLD" => DIVIDE BY ZERO\n", i, w2));
} else {
TRACE((LLD" "LLD" => DIVIDE BY ZERO\n", w, w2));
}
goto divideByZero;
}
if (value2Ptr->typePtr == &tclIntType && i2 == 0) {
if (valuePtr->typePtr == &tclIntType) {
TRACE(("%ld %ld => DIVIDE BY ZERO\n", i, i2));
} else {
TRACE((LLD" %ld => DIVIDE BY ZERO\n", w, i2));
}
goto divideByZero;
}
negative = 0;
if (valuePtr->typePtr == &tclWideIntType
|| value2Ptr->typePtr == &tclWideIntType) {
Tcl_WideInt wRemainder;
/*
* Promote to wide
*/
if (valuePtr->typePtr == &tclIntType) {
w = Tcl_LongAsWide(i);
} else if (value2Ptr->typePtr == &tclIntType) {
w2 = Tcl_LongAsWide(i2);
}
if (w2 < 0) {
w2 = -w2;
w = -w;
negative = 1;
}
wRemainder = w % w2;
if (wRemainder < 0) {
wRemainder += w2;
}
if (negative) {
wRemainder = -wRemainder;
}
wResult = wRemainder;
doWide = 1;
break;
}
if (i2 < 0) {
i2 = -i2;
i = -i;
negative = 1;
}
rem = i % i2;
if (rem < 0) {
rem += i2;
}
if (negative) {
rem = -rem;
}
iResult = rem;
break;
case INST_LSHIFT:
/*
* Shifts are never usefully 64-bits wide!
*/
FORCE_LONG(value2Ptr, i2, w2);
if (valuePtr->typePtr == &tclWideIntType) {
#ifdef TCL_COMPILE_DEBUG
w2 = Tcl_LongAsWide(i2);
#endif /* TCL_COMPILE_DEBUG */
wResult = w << i2;
doWide = 1;
break;
}
iResult = i << i2;
break;
case INST_RSHIFT:
/*
* The following code is a bit tricky: it ensures that
* right shifts propagate the sign bit even on machines
* where ">>" won't do it by default.
*/
/*
* Shifts are never usefully 64-bits wide!
*/
FORCE_LONG(value2Ptr, i2, w2);
if (valuePtr->typePtr == &tclWideIntType) {
#ifdef TCL_COMPILE_DEBUG
w2 = Tcl_LongAsWide(i2);
#endif /* TCL_COMPILE_DEBUG */
if (w < 0) {
wResult = ~((~w) >> i2);
} else {
wResult = w >> i2;
}
doWide = 1;
break;
}
if (i < 0) {
iResult = ~((~i) >> i2);
} else {
iResult = i >> i2;
}
break;
case INST_BITOR:
if (valuePtr->typePtr == &tclWideIntType
|| value2Ptr->typePtr == &tclWideIntType) {
/*
* Promote to wide
*/
if (valuePtr->typePtr == &tclIntType) {
w = Tcl_LongAsWide(i);
} else if (value2Ptr->typePtr == &tclIntType) {
w2 = Tcl_LongAsWide(i2);
}
wResult = w | w2;
doWide = 1;
break;
}
iResult = i | i2;
break;
case INST_BITXOR:
if (valuePtr->typePtr == &tclWideIntType
|| value2Ptr->typePtr == &tclWideIntType) {
/*
* Promote to wide
*/
if (valuePtr->typePtr == &tclIntType) {
w = Tcl_LongAsWide(i);
} else if (value2Ptr->typePtr == &tclIntType) {
w2 = Tcl_LongAsWide(i2);
}
wResult = w ^ w2;
doWide = 1;
break;
}
iResult = i ^ i2;
break;
case INST_BITAND:
if (valuePtr->typePtr == &tclWideIntType
|| value2Ptr->typePtr == &tclWideIntType) {
/*
* Promote to wide
*/
if (valuePtr->typePtr == &tclIntType) {
w = Tcl_LongAsWide(i);
} else if (value2Ptr->typePtr == &tclIntType) {
w2 = Tcl_LongAsWide(i2);
}
wResult = w & w2;
doWide = 1;
break;
}
iResult = i & i2;
break;
}
/*
* Reuse the valuePtr object already on stack if possible.
*/
if (Tcl_IsShared(valuePtr)) {
if (doWide) {
objResultPtr = Tcl_NewWideIntObj(wResult);
TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult));
} else {
objResultPtr = Tcl_NewLongObj(iResult);
TRACE(("%ld %ld => %ld\n", i, i2, iResult));
}
NEXT_INST_F(1, 2, 1);
} else { /* reuse the valuePtr object */
if (doWide) {
TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult));
Tcl_SetWideIntObj(valuePtr, wResult);
} else {
TRACE(("%ld %ld => %ld\n", i, i2, iResult));
Tcl_SetLongObj(valuePtr, iResult);
}
NEXT_INST_F(1, 1, 0);
}
}
case INST_ADD:
case INST_SUB:
case INST_MULT:
case INST_DIV:
{
/*
* Operands must be numeric and ints get converted to floats
* if necessary. We compute value op value2.
*/
Tcl_ObjType *t1Ptr, *t2Ptr;
long i2 = 0, quot, rem; /* Init. avoids compiler warning. */
double d1, d2;
long iResult = 0; /* Init. avoids compiler warning. */
double dResult = 0.0; /* Init. avoids compiler warning. */
int doDouble = 0; /* 1 if doing floating arithmetic */
Tcl_WideInt w2, wquot, wrem;
Tcl_WideInt wResult = W0; /* Init. avoids compiler warning. */
int doWide = 0; /* 1 if doing wide arithmetic. */
value2Ptr = stackPtr[stackTop];
valuePtr = stackPtr[stackTop - 1];
t1Ptr = valuePtr->typePtr;
t2Ptr = value2Ptr->typePtr;
if (t1Ptr == &tclIntType) {
i = valuePtr->internalRep.longValue;
} else if (t1Ptr == &tclWideIntType) {
TclGetWide(w,valuePtr);
} else if ((t1Ptr == &tclDoubleType)
&& (valuePtr->bytes == NULL)) {
/*
* We can only use the internal rep directly if there is
* no string rep. Otherwise the string rep might actually
* look like an integer, which is preferred.
*/
d1 = valuePtr->internalRep.doubleValue;
} else {
char *s = Tcl_GetStringFromObj(valuePtr, &length);
if (TclLooksLikeInt(s, length)) {
GET_WIDE_OR_INT(result, valuePtr, i, w);
} else {
result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL,
valuePtr, &d1);
}
if (result != TCL_OK) {
TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n",
s, O2S(valuePtr),
(valuePtr->typePtr?
valuePtr->typePtr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, valuePtr);
CACHE_STACK_INFO();
goto checkForCatch;
}
t1Ptr = valuePtr->typePtr;
}
if (t2Ptr == &tclIntType) {
i2 = value2Ptr->internalRep.longValue;
} else if (t2Ptr == &tclWideIntType) {
TclGetWide(w2,value2Ptr);
} else if ((t2Ptr == &tclDoubleType)
&& (value2Ptr->bytes == NULL)) {
/*
* We can only use the internal rep directly if there is
* no string rep. Otherwise the string rep might actually
* look like an integer, which is preferred.
*/
d2 = value2Ptr->internalRep.doubleValue;
} else {
char *s = Tcl_GetStringFromObj(value2Ptr, &length);
if (TclLooksLikeInt(s, length)) {
GET_WIDE_OR_INT(result, value2Ptr, i2, w2);
} else {
result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL,
value2Ptr, &d2);
}
if (result != TCL_OK) {
TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n",
O2S(value2Ptr), s,
(value2Ptr->typePtr?
value2Ptr->typePtr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, value2Ptr);
CACHE_STACK_INFO();
goto checkForCatch;
}
t2Ptr = value2Ptr->typePtr;
}
if ((t1Ptr == &tclDoubleType) || (t2Ptr == &tclDoubleType)) {
/*
* Do double arithmetic.
*/
doDouble = 1;
if (t1Ptr == &tclIntType) {
d1 = i; /* promote value 1 to double */
} else if (t2Ptr == &tclIntType) {
d2 = i2; /* promote value 2 to double */
} else if (t1Ptr == &tclWideIntType) {
d1 = Tcl_WideAsDouble(w);
} else if (t2Ptr == &tclWideIntType) {
d2 = Tcl_WideAsDouble(w2);
}
switch (*pc) {
case INST_ADD:
dResult = d1 + d2;
break;
case INST_SUB:
dResult = d1 - d2;
break;
case INST_MULT:
dResult = d1 * d2;
break;
case INST_DIV:
if (d2 == 0.0) {
TRACE(("%.6g %.6g => DIVIDE BY ZERO\n", d1, d2));
goto divideByZero;
}
dResult = d1 / d2;
break;
}
/*
* Check now for IEEE floating-point error.
*/
if (IS_NAN(dResult) || IS_INF(dResult)) {
TRACE(("%.20s %.20s => IEEE FLOATING PT ERROR\n",
O2S(valuePtr), O2S(value2Ptr)));
DECACHE_STACK_INFO();
TclExprFloatError(interp, dResult);
CACHE_STACK_INFO();
result = TCL_ERROR;
goto checkForCatch;
}
} else if ((t1Ptr == &tclWideIntType)
|| (t2Ptr == &tclWideIntType)) {
/*
* Do wide integer arithmetic.
*/
doWide = 1;
if (t1Ptr == &tclIntType) {
w = Tcl_LongAsWide(i);
} else if (t2Ptr == &tclIntType) {
w2 = Tcl_LongAsWide(i2);
}
switch (*pc) {
case INST_ADD:
wResult = w + w2;
break;
case INST_SUB:
wResult = w - w2;
break;
case INST_MULT:
wResult = w * w2;
break;
case INST_DIV:
/*
* This code is tricky: C doesn't guarantee much
* about the quotient or remainder, but Tcl does.
* The remainder always has the same sign as the
* divisor and a smaller absolute value.
*/
if (w2 == W0) {
TRACE((LLD" "LLD" => DIVIDE BY ZERO\n", w, w2));
goto divideByZero;
}
if (w2 < 0) {
w2 = -w2;
w = -w;
}
wquot = w / w2;
wrem = w % w2;
if (wrem < W0) {
wquot -= 1;
}
wResult = wquot;
break;
}
} else {
/*
* Do integer arithmetic.
*/
switch (*pc) {
case INST_ADD:
iResult = i + i2;
break;
case INST_SUB:
iResult = i - i2;
break;
case INST_MULT:
iResult = i * i2;
break;
case INST_DIV:
/*
* This code is tricky: C doesn't guarantee much
* about the quotient or remainder, but Tcl does.
* The remainder always has the same sign as the
* divisor and a smaller absolute value.
*/
if (i2 == 0) {
TRACE(("%ld %ld => DIVIDE BY ZERO\n", i, i2));
goto divideByZero;
}
if (i2 < 0) {
i2 = -i2;
i = -i;
}
quot = i / i2;
rem = i % i2;
if (rem < 0) {
quot -= 1;
}
iResult = quot;
break;
}
}
/*
* Reuse the valuePtr object already on stack if possible.
*/
if (Tcl_IsShared(valuePtr)) {
if (doDouble) {
objResultPtr = Tcl_NewDoubleObj(dResult);
TRACE(("%.6g %.6g => %.6g\n", d1, d2, dResult));
} else if (doWide) {
objResultPtr = Tcl_NewWideIntObj(wResult);
TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult));
} else {
objResultPtr = Tcl_NewLongObj(iResult);
TRACE(("%ld %ld => %ld\n", i, i2, iResult));
}
NEXT_INST_F(1, 2, 1);
} else { /* reuse the valuePtr object */
if (doDouble) { /* NB: stack top is off by 1 */
TRACE(("%.6g %.6g => %.6g\n", d1, d2, dResult));
Tcl_SetDoubleObj(valuePtr, dResult);
} else if (doWide) {
TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult));
Tcl_SetWideIntObj(valuePtr, wResult);
} else {
TRACE(("%ld %ld => %ld\n", i, i2, iResult));
Tcl_SetLongObj(valuePtr, iResult);
}
NEXT_INST_F(1, 1, 0);
}
}
case INST_UPLUS:
{
/*
* Operand must be numeric.
*/
double d;
Tcl_ObjType *tPtr;
valuePtr = stackPtr[stackTop];
tPtr = valuePtr->typePtr;
if (!IS_INTEGER_TYPE(tPtr) && ((tPtr != &tclDoubleType)
|| (valuePtr->bytes != NULL))) {
char *s = Tcl_GetStringFromObj(valuePtr, &length);
if (TclLooksLikeInt(s, length)) {
GET_WIDE_OR_INT(result, valuePtr, i, w);
} else {
result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, valuePtr, &d);
}
if (result != TCL_OK) {
TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n",
s, (tPtr? tPtr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, valuePtr);
CACHE_STACK_INFO();
goto checkForCatch;
}
tPtr = valuePtr->typePtr;
}
/*
* Ensure that the operand's string rep is the same as the
* formatted version of its internal rep. This makes sure
* that "expr +000123" yields "83", not "000123". We
* implement this by _discarding_ the string rep since we
* know it will be regenerated, if needed later, by
* formatting the internal rep's value.
*/
if (Tcl_IsShared(valuePtr)) {
if (tPtr == &tclIntType) {
i = valuePtr->internalRep.longValue;
objResultPtr = Tcl_NewLongObj(i);
} else if (tPtr == &tclWideIntType) {
TclGetWide(w,valuePtr);
objResultPtr = Tcl_NewWideIntObj(w);
} else {
d = valuePtr->internalRep.doubleValue;
objResultPtr = Tcl_NewDoubleObj(d);
}
TRACE_WITH_OBJ(("%s => ", O2S(objResultPtr)), objResultPtr);
NEXT_INST_F(1, 1, 1);
} else {
Tcl_InvalidateStringRep(valuePtr);
TRACE_WITH_OBJ(("%s => ", O2S(valuePtr)), valuePtr);
NEXT_INST_F(1, 0, 0);
}
}
case INST_UMINUS:
case INST_LNOT:
{
/*
* The operand must be numeric or a boolean string as
* accepted by Tcl_GetBooleanFromObj(). If the operand
* object is unshared modify it directly, otherwise
* create a copy to modify: this is "copy on write".
* Free any old string representation since it is now
* invalid.
*/
double d;
int boolvar;
Tcl_ObjType *tPtr;
valuePtr = stackPtr[stackTop];
tPtr = valuePtr->typePtr;
if (!IS_INTEGER_TYPE(tPtr) && ((tPtr != &tclDoubleType)
|| (valuePtr->bytes != NULL))) {
if ((tPtr == &tclBooleanType) && (valuePtr->bytes == NULL)) {
valuePtr->typePtr = &tclIntType;
} else {
char *s = Tcl_GetStringFromObj(valuePtr, &length);
if (TclLooksLikeInt(s, length)) {
GET_WIDE_OR_INT(result, valuePtr, i, w);
} else {
result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL,
valuePtr, &d);
}
if (result == TCL_ERROR && *pc == INST_LNOT) {
result = Tcl_GetBooleanFromObj((Tcl_Interp *)NULL,
valuePtr, &boolvar);
i = (long)boolvar; /* i is long, not int! */
}
if (result != TCL_OK) {
TRACE(("\"%.20s\" => ILLEGAL TYPE %s\n",
s, (tPtr? tPtr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, valuePtr);
CACHE_STACK_INFO();
goto checkForCatch;
}
}
tPtr = valuePtr->typePtr;
}
if (Tcl_IsShared(valuePtr)) {
/*
* Create a new object.
*/
if ((tPtr == &tclIntType) || (tPtr == &tclBooleanType)) {
i = valuePtr->internalRep.longValue;
objResultPtr = Tcl_NewLongObj(
(*pc == INST_UMINUS)? -i : !i);
TRACE_WITH_OBJ(("%ld => ", i), objResultPtr);
} else if (tPtr == &tclWideIntType) {
TclGetWide(w,valuePtr);
if (*pc == INST_UMINUS) {
objResultPtr = Tcl_NewWideIntObj(-w);
} else {
objResultPtr = Tcl_NewLongObj(w == W0);
}
TRACE_WITH_OBJ((LLD" => ", w), objResultPtr);
} else {
d = valuePtr->internalRep.doubleValue;
if (*pc == INST_UMINUS) {
objResultPtr = Tcl_NewDoubleObj(-d);
} else {
/*
* Should be able to use "!d", but apparently
* some compilers can't handle it.
*/
objResultPtr = Tcl_NewLongObj((d==0.0)? 1 : 0);
}
TRACE_WITH_OBJ(("%.6g => ", d), objResultPtr);
}
NEXT_INST_F(1, 1, 1);
} else {
/*
* valuePtr is unshared. Modify it directly.
*/
if ((tPtr == &tclIntType) || (tPtr == &tclBooleanType)) {
i = valuePtr->internalRep.longValue;
Tcl_SetLongObj(valuePtr,
(*pc == INST_UMINUS)? -i : !i);
TRACE_WITH_OBJ(("%ld => ", i), valuePtr);
} else if (tPtr == &tclWideIntType) {
TclGetWide(w,valuePtr);
if (*pc == INST_UMINUS) {
Tcl_SetWideIntObj(valuePtr, -w);
} else {
Tcl_SetLongObj(valuePtr, w == W0);
}
TRACE_WITH_OBJ((LLD" => ", w), valuePtr);
} else {
d = valuePtr->internalRep.doubleValue;
if (*pc == INST_UMINUS) {
Tcl_SetDoubleObj(valuePtr, -d);
} else {
/*
* Should be able to use "!d", but apparently
* some compilers can't handle it.
*/
Tcl_SetLongObj(valuePtr, (d==0.0)? 1 : 0);
}
TRACE_WITH_OBJ(("%.6g => ", d), valuePtr);
}
NEXT_INST_F(1, 0, 0);
}
}
case INST_BITNOT:
{
/*
* The operand must be an integer. If the operand object is
* unshared modify it directly, otherwise modify a copy.
* Free any old string representation since it is now
* invalid.
*/
Tcl_ObjType *tPtr;
valuePtr = stackPtr[stackTop];
tPtr = valuePtr->typePtr;
if (!IS_INTEGER_TYPE(tPtr)) {
REQUIRE_WIDE_OR_INT(result, valuePtr, i, w);
if (result != TCL_OK) { /* try to convert to double */
TRACE(("\"%.20s\" => ILLEGAL TYPE %s\n",
O2S(valuePtr), (tPtr? tPtr->name : "null")));
DECACHE_STACK_INFO();
IllegalExprOperandType(interp, pc, valuePtr);
CACHE_STACK_INFO();
goto checkForCatch;
}
}
if (valuePtr->typePtr == &tclWideIntType) {
TclGetWide(w,valuePtr);
if (Tcl_IsShared(valuePtr)) {
objResultPtr = Tcl_NewWideIntObj(~w);
TRACE(("0x%llx => (%llu)\n", w, ~w));
NEXT_INST_F(1, 1, 1);
} else {
/*
* valuePtr is unshared. Modify it directly.
*/
Tcl_SetWideIntObj(valuePtr, ~w);
TRACE(("0x%llx => (%llu)\n", w, ~w));
NEXT_INST_F(1, 0, 0);
}
} else {
i = valuePtr->internalRep.longValue;
if (Tcl_IsShared(valuePtr)) {
objResultPtr = Tcl_NewLongObj(~i);
TRACE(("0x%lx => (%lu)\n", i, ~i));
NEXT_INST_F(1, 1, 1);
} else {
/*
* valuePtr is unshared. Modify it directly.
*/
Tcl_SetLongObj(valuePtr, ~i);
TRACE(("0x%lx => (%lu)\n", i, ~i));
NEXT_INST_F(1, 0, 0);
}
}
}
case INST_CALL_BUILTIN_FUNC1:
opnd = TclGetUInt1AtPtr(pc+1);
{
/*
* Call one of the built-in Tcl math functions.
*/
BuiltinFunc *mathFuncPtr;
if ((opnd < 0) || (opnd > LAST_BUILTIN_FUNC)) {
TRACE(("UNRECOGNIZED BUILTIN FUNC CODE %d\n", opnd));
panic("TclExecuteByteCode: unrecognized builtin function code %d", opnd);
}
mathFuncPtr = &(tclBuiltinFuncTable[opnd]);
DECACHE_STACK_INFO();
result = (*mathFuncPtr->proc)(interp, eePtr,
mathFuncPtr->clientData);
CACHE_STACK_INFO();
if (result != TCL_OK) {
goto checkForCatch;
}
TRACE_WITH_OBJ(("%d => ", opnd), stackPtr[stackTop]);
}
NEXT_INST_F(2, 0, 0);
case INST_CALL_FUNC1:
opnd = TclGetUInt1AtPtr(pc+1);
{
/*
* Call a non-builtin Tcl math function previously
* registered by a call to Tcl_CreateMathFunc.
*/
int objc = opnd; /* Number of arguments. The function name
* is the 0-th argument. */
Tcl_Obj **objv; /* The array of arguments. The function
* name is objv[0]. */
objv = &(stackPtr[stackTop - (objc-1)]); /* "objv[0]" */
DECACHE_STACK_INFO();
result = ExprCallMathFunc(interp, eePtr, objc, objv);
CACHE_STACK_INFO();
if (result != TCL_OK) {
goto checkForCatch;
}
TRACE_WITH_OBJ(("%d => ", objc), stackPtr[stackTop]);
}
NEXT_INST_F(2, 0, 0);
case INST_TRY_CVT_TO_NUMERIC:
{
/*
* Try to convert the topmost stack object to an int or
* double object. This is done in order to support Tcl's
* policy of interpreting operands if at all possible as
* first integers, else floating-point numbers.
*/
double d;
char *s;
Tcl_ObjType *tPtr;
int converted, needNew;
valuePtr = stackPtr[stackTop];
tPtr = valuePtr->typePtr;
converted = 0;
if (!IS_INTEGER_TYPE(tPtr) && ((tPtr != &tclDoubleType)
|| (valuePtr->bytes != NULL))) {
if ((tPtr == &tclBooleanType) && (valuePtr->bytes == NULL)) {
valuePtr->typePtr = &tclIntType;
converted = 1;
} else {
s = Tcl_GetStringFromObj(valuePtr, &length);
if (TclLooksLikeInt(s, length)) {
GET_WIDE_OR_INT(result, valuePtr, i, w);
} else {
result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL,
valuePtr, &d);
}
if (result == TCL_OK) {
converted = 1;
}
result = TCL_OK; /* reset the result variable */
}
tPtr = valuePtr->typePtr;
}
/*
* Ensure that the topmost stack object, if numeric, has a
* string rep the same as the formatted version of its
* internal rep. This is used, e.g., to make sure that "expr
* {0001}" yields "1", not "0001". We implement this by
* _discarding_ the string rep since we know it will be
* regenerated, if needed later, by formatting the internal
* rep's value. Also check if there has been an IEEE
* floating point error.
*/
objResultPtr = valuePtr;
needNew = 0;
if (IS_NUMERIC_TYPE(tPtr)) {
if (Tcl_IsShared(valuePtr)) {
if (valuePtr->bytes != NULL) {
/*
* We only need to make a copy of the object
* when it already had a string rep
*/
needNew = 1;
if (tPtr == &tclIntType) {
i = valuePtr->internalRep.longValue;
objResultPtr = Tcl_NewLongObj(i);
} else if (tPtr == &tclWideIntType) {
TclGetWide(w,valuePtr);
objResultPtr = Tcl_NewWideIntObj(w);
} else {
d = valuePtr->internalRep.doubleValue;
objResultPtr = Tcl_NewDoubleObj(d);
}
tPtr = objResultPtr->typePtr;
}
} else {
Tcl_InvalidateStringRep(valuePtr);
}
if (tPtr == &tclDoubleType) {
d = objResultPtr->internalRep.doubleValue;
if (IS_NAN(d) || IS_INF(d)) {
TRACE(("\"%.20s\" => IEEE FLOATING PT ERROR\n",
O2S(objResultPtr)));
DECACHE_STACK_INFO();
TclExprFloatError(interp, d);
CACHE_STACK_INFO();
result = TCL_ERROR;
goto checkForCatch;
}
}
converted = converted; /* lint, converted not used. */
TRACE(("\"%.20s\" => numeric, %s, %s\n", O2S(valuePtr),
(converted? "converted" : "not converted"),
(needNew? "new Tcl_Obj" : "same Tcl_Obj")));
} else {
TRACE(("\"%.20s\" => not numeric\n", O2S(valuePtr)));
}
if (needNew) {
NEXT_INST_F(1, 1, 1);
} else {
NEXT_INST_F(1, 0, 0);
}
}
case INST_BREAK:
DECACHE_STACK_INFO();
Tcl_ResetResult(interp);
CACHE_STACK_INFO();
result = TCL_BREAK;
cleanup = 0;
goto processExceptionReturn;
case INST_CONTINUE:
DECACHE_STACK_INFO();
Tcl_ResetResult(interp);
CACHE_STACK_INFO();
result = TCL_CONTINUE;
cleanup = 0;
goto processExceptionReturn;
case INST_FOREACH_START4:
opnd = TclGetUInt4AtPtr(pc+1);
{
/*
* Initialize the temporary local var that holds the count
* of the number of iterations of the loop body to -1.
*/
ForeachInfo *infoPtr = (ForeachInfo *)
codePtr->auxDataArrayPtr[opnd].clientData;
int iterTmpIndex = infoPtr->loopCtTemp;
Var *compiledLocals = iPtr->varFramePtr->compiledLocals;
Var *iterVarPtr = &(compiledLocals[iterTmpIndex]);
Tcl_Obj *oldValuePtr = iterVarPtr->value.objPtr;
if (oldValuePtr == NULL) {
iterVarPtr->value.objPtr = Tcl_NewLongObj(-1);
Tcl_IncrRefCount(iterVarPtr->value.objPtr);
} else {
Tcl_SetLongObj(oldValuePtr, -1);
}
TclSetVarScalar(iterVarPtr);
TclClearVarUndefined(iterVarPtr);
TRACE(("%u => loop iter count temp %d\n",
opnd, iterTmpIndex));
}
#ifndef TCL_COMPILE_DEBUG
/*
* Remark that the compiler ALWAYS sets INST_FOREACH_STEP4
* immediately after INST_FOREACH_START4 - let us just fall
* through instead of jumping back to the top.
*/
pc += 5;
#else
NEXT_INST_F(5, 0, 0);
#endif
case INST_FOREACH_STEP4:
opnd = TclGetUInt4AtPtr(pc+1);
{
/*
* "Step" a foreach loop (i.e., begin its next iteration) by
* assigning the next value list element to each loop var.
*/
ForeachInfo *infoPtr = (ForeachInfo *)
codePtr->auxDataArrayPtr[opnd].clientData;
ForeachVarList *varListPtr;
int numLists = infoPtr->numLists;
Var *compiledLocals = iPtr->varFramePtr->compiledLocals;
Tcl_Obj *listPtr;
List *listRepPtr;
Var *iterVarPtr, *listVarPtr;
int iterNum, listTmpIndex, listLen, numVars;
int varIndex, valIndex, continueLoop, j;
/*
* Increment the temp holding the loop iteration number.
*/
iterVarPtr = &(compiledLocals[infoPtr->loopCtTemp]);
valuePtr = iterVarPtr->value.objPtr;
iterNum = (valuePtr->internalRep.longValue + 1);
Tcl_SetLongObj(valuePtr, iterNum);
/*
* Check whether all value lists are exhausted and we should
* stop the loop.
*/
continueLoop = 0;
listTmpIndex = infoPtr->firstValueTemp;
for (i = 0; i < numLists; i++) {
varListPtr = infoPtr->varLists[i];
numVars = varListPtr->numVars;
listVarPtr = &(compiledLocals[listTmpIndex]);
listPtr = listVarPtr->value.objPtr;
result = Tcl_ListObjLength(interp, listPtr, &listLen);
if (result != TCL_OK) {
TRACE_WITH_OBJ(("%u => ERROR converting list %ld, \"%s\": ",
opnd, i, O2S(listPtr)), Tcl_GetObjResult(interp));
goto checkForCatch;
}
if (listLen > (iterNum * numVars)) {
continueLoop = 1;
}
listTmpIndex++;
}
/*
* If some var in some var list still has a remaining list
* element iterate one more time. Assign to var the next
* element from its value list. We already checked above
* that each list temp holds a valid list object.
*/
if (continueLoop) {
listTmpIndex = infoPtr->firstValueTemp;
for (i = 0; i < numLists; i++) {
varListPtr = infoPtr->varLists[i];
numVars = varListPtr->numVars;
listVarPtr = &(compiledLocals[listTmpIndex]);
listPtr = listVarPtr->value.objPtr;
listRepPtr = (List *) listPtr->internalRep.twoPtrValue.ptr1;
listLen = listRepPtr->elemCount;
valIndex = (iterNum * numVars);
for (j = 0; j < numVars; j++) {
int setEmptyStr = 0;
if (valIndex >= listLen) {
setEmptyStr = 1;
TclNewObj(valuePtr);
} else {
valuePtr = listRepPtr->elements[valIndex];
}
varIndex = varListPtr->varIndexes[j];
varPtr = &(varFramePtr->compiledLocals[varIndex]);
part1 = varPtr->name;
while (TclIsVarLink(varPtr)) {
varPtr = varPtr->value.linkPtr;
}
if (!((varPtr->flags & VAR_IN_HASHTABLE) && (varPtr->hPtr == NULL))
&& (varPtr->tracePtr == NULL)
&& (TclIsVarScalar(varPtr) || TclIsVarUndefined(varPtr))) {
value2Ptr = varPtr->value.objPtr;
if (valuePtr != value2Ptr) {
if (value2Ptr != NULL) {
TclDecrRefCount(value2Ptr);
} else {
TclSetVarScalar(varPtr);
TclClearVarUndefined(varPtr);
}
varPtr->value.objPtr = valuePtr;
Tcl_IncrRefCount(valuePtr);
}
} else {
DECACHE_STACK_INFO();
value2Ptr = TclPtrSetVar(interp, varPtr, NULL, part1,
NULL, valuePtr, TCL_LEAVE_ERR_MSG);
CACHE_STACK_INFO();
if (value2Ptr == NULL) {
TRACE_WITH_OBJ(("%u => ERROR init. index temp %d: ",
opnd, varIndex),
Tcl_GetObjResult(interp));
if (setEmptyStr) {
TclDecrRefCount(valuePtr);
}
result = TCL_ERROR;
goto checkForCatch;
}
}
valIndex++;
}
listTmpIndex++;
}
}
TRACE(("%u => %d lists, iter %d, %s loop\n", opnd, numLists,
iterNum, (continueLoop? "continue" : "exit")));
/*
* Run-time peep-hole optimisation: the compiler ALWAYS follows
* INST_FOREACH_STEP4 with an INST_JUMP_FALSE. We just skip that
* instruction and jump direct from here.
*/
pc += 5;
if (*pc == INST_JUMP_FALSE1) {
NEXT_INST_F((continueLoop? 2 : TclGetInt1AtPtr(pc+1)), 0, 0);
} else {
NEXT_INST_F((continueLoop? 5 : TclGetInt4AtPtr(pc+1)), 0, 0);
}
}
case INST_BEGIN_CATCH4:
/*
* Record start of the catch command with exception range index
* equal to the operand. Push the current stack depth onto the
* special catch stack.
*/
catchStackPtr[++catchTop] = stackTop;
TRACE(("%u => catchTop=%d, stackTop=%d\n",
TclGetUInt4AtPtr(pc+1), catchTop, stackTop));
NEXT_INST_F(5, 0, 0);
case INST_END_CATCH:
catchTop--;
result = TCL_OK;
TRACE(("=> catchTop=%d\n", catchTop));
NEXT_INST_F(1, 0, 0);
case INST_PUSH_RESULT:
objResultPtr = Tcl_GetObjResult(interp);
TRACE_WITH_OBJ(("=> "), Tcl_GetObjResult(interp));
/*
* See the comments at INST_INVOKE_STK
*/
{
Tcl_Obj *newObjResultPtr;
TclNewObj(newObjResultPtr);
Tcl_IncrRefCount(newObjResultPtr);
iPtr->objResultPtr = newObjResultPtr;
}
NEXT_INST_F(1, 0, -1);
case INST_PUSH_RETURN_CODE:
objResultPtr = Tcl_NewLongObj(result);
TRACE(("=> %u\n", result));
NEXT_INST_F(1, 0, 1);
default:
panic("TclExecuteByteCode: unrecognized opCode %u", *pc);
} /* end of switch on opCode */
/*
* Division by zero in an expression. Control only reaches this
* point by "goto divideByZero".
*/
divideByZero:
DECACHE_STACK_INFO();
Tcl_ResetResult(interp);
Tcl_AppendToObj(Tcl_GetObjResult(interp), "divide by zero", -1);
Tcl_SetErrorCode(interp, "ARITH", "DIVZERO", "divide by zero",
(char *) NULL);
CACHE_STACK_INFO();
result = TCL_ERROR;
goto checkForCatch;
/*
* An external evaluation (INST_INVOKE or INST_EVAL) returned
* something different from TCL_OK, or else INST_BREAK or
* INST_CONTINUE were called.
*/
processExceptionReturn:
#if TCL_COMPILE_DEBUG
switch (*pc) {
case INST_INVOKE_STK1:
case INST_INVOKE_STK4:
TRACE(("%u => ... after \"%.20s\": ", opnd, cmdNameBuf));
break;
case INST_EVAL_STK:
/*
* Note that the object at stacktop has to be used
* before doing the cleanup.
*/
TRACE(("\"%.30s\" => ", O2S(stackPtr[stackTop])));
break;
default:
TRACE(("=> "));
}
#endif
if ((result == TCL_CONTINUE) || (result == TCL_BREAK)) {
rangePtr = GetExceptRangeForPc(pc, /*catchOnly*/ 0, codePtr);
if (rangePtr == NULL) {
TRACE_APPEND(("no encl. loop or catch, returning %s\n",
StringForResultCode(result)));
goto abnormalReturn;
}
if (rangePtr->type == CATCH_EXCEPTION_RANGE) {
TRACE_APPEND(("%s ...\n", StringForResultCode(result)));
goto processCatch;
}
while (cleanup--) {
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
}
if (result == TCL_BREAK) {
result = TCL_OK;
pc = (codePtr->codeStart + rangePtr->breakOffset);
TRACE_APPEND(("%s, range at %d, new pc %d\n",
StringForResultCode(result),
rangePtr->codeOffset, rangePtr->breakOffset));
NEXT_INST_F(0, 0, 0);
} else {
if (rangePtr->continueOffset == -1) {
TRACE_APPEND(("%s, loop w/o continue, checking for catch\n",
StringForResultCode(result)));
goto checkForCatch;
}
result = TCL_OK;
pc = (codePtr->codeStart + rangePtr->continueOffset);
TRACE_APPEND(("%s, range at %d, new pc %d\n",
StringForResultCode(result),
rangePtr->codeOffset, rangePtr->continueOffset));
NEXT_INST_F(0, 0, 0);
}
#if TCL_COMPILE_DEBUG
} else if (traceInstructions) {
if ((result != TCL_ERROR) && (result != TCL_RETURN)) {
objPtr = Tcl_GetObjResult(interp);
TRACE_APPEND(("OTHER RETURN CODE %d, result= \"%s\"\n ",
result, O2S(objPtr)));
} else {
objPtr = Tcl_GetObjResult(interp);
TRACE_APPEND(("%s, result= \"%s\"\n",
StringForResultCode(result), O2S(objPtr)));
}
#endif
}
/*
* Execution has generated an "exception" such as TCL_ERROR. If the
* exception is an error, record information about what was being
* executed when the error occurred. Find the closest enclosing
* catch range, if any. If no enclosing catch range is found, stop
* execution and return the "exception" code.
*/
checkForCatch:
if ((result == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) {
bytes = GetSrcInfoForPc(pc, codePtr, &length);
if (bytes != NULL) {
DECACHE_STACK_INFO();
Tcl_LogCommandInfo(interp, codePtr->source, bytes, length);
CACHE_STACK_INFO();
iPtr->flags |= ERR_ALREADY_LOGGED;
}
}
if (catchTop == -1) {
#ifdef TCL_COMPILE_DEBUG
if (traceInstructions) {
fprintf(stdout, " ... no enclosing catch, returning %s\n",
StringForResultCode(result));
}
#endif
goto abnormalReturn;
}
rangePtr = GetExceptRangeForPc(pc, /*catchOnly*/ 1, codePtr);
if (rangePtr == NULL) {
/*
* This is only possible when compiling a [catch] that sends its
* script to INST_EVAL. Cannot correct the compiler without
* breakingcompat with previous .tbc compiled scripts.
*/
#ifdef TCL_COMPILE_DEBUG
if (traceInstructions) {
fprintf(stdout, " ... no enclosing catch, returning %s\n",
StringForResultCode(result));
}
#endif
goto abnormalReturn;
}
/*
* A catch exception range (rangePtr) was found to handle an
* "exception". It was found either by checkForCatch just above or
* by an instruction during break, continue, or error processing.
* Jump to its catchOffset after unwinding the operand stack to
* the depth it had when starting to execute the range's catch
* command.
*/
processCatch:
while (stackTop > catchStackPtr[catchTop]) {
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
}
#ifdef TCL_COMPILE_DEBUG
if (traceInstructions) {
fprintf(stdout, " ... found catch at %d, catchTop=%d, unwound to %d, new pc %u\n",
rangePtr->codeOffset, catchTop, catchStackPtr[catchTop],
(unsigned int)(rangePtr->catchOffset));
}
#endif
pc = (codePtr->codeStart + rangePtr->catchOffset);
NEXT_INST_F(0, 0, 0); /* restart the execution loop at pc */
/*
* end of infinite loop dispatching on instructions.
*/
/*
* Abnormal return code. Restore the stack to state it had when starting
* to execute the ByteCode. Panic if the stack is below the initial level.
*/
abnormalReturn:
while (stackTop > initStackTop) {
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
}
if (stackTop < initStackTop) {
fprintf(stderr, "\nTclExecuteByteCode: abnormal return at pc %u: stack top %d < entry stack top %d\n",
(unsigned int)(pc - codePtr->codeStart),
(unsigned int) stackTop,
(unsigned int) initStackTop);
panic("TclExecuteByteCode execution failure: end stack top < start stack top");
}
/*
* Free the catch stack array if malloc'ed storage was used.
*/
if (catchStackPtr != catchStackStorage) {
ckfree((char *) catchStackPtr);
}
eePtr->stackTop = initStackTop;
return result;
#undef STATIC_CATCH_STACK_SIZE
}
#ifdef TCL_COMPILE_DEBUG
/*
*----------------------------------------------------------------------
*
* PrintByteCodeInfo --
*
* This procedure prints a summary about a bytecode object to stdout.
* It is called by TclExecuteByteCode when starting to execute the
* bytecode object if tclTraceExec has the value 2 or more.
*
* Results:
* None.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static void
PrintByteCodeInfo(codePtr)
register ByteCode *codePtr; /* The bytecode whose summary is printed
* to stdout. */
{
Proc *procPtr = codePtr->procPtr;
Interp *iPtr = (Interp *) *codePtr->interpHandle;
fprintf(stdout, "\nExecuting ByteCode 0x%x, refCt %u, epoch %u, interp 0x%x (epoch %u)\n",
(unsigned int) codePtr, codePtr->refCount,
codePtr->compileEpoch, (unsigned int) iPtr,
iPtr->compileEpoch);
fprintf(stdout, " Source: ");
TclPrintSource(stdout, codePtr->source, 60);
fprintf(stdout, "\n Cmds %d, src %d, inst %u, litObjs %u, aux %d, stkDepth %u, code/src %.2f\n",
codePtr->numCommands, codePtr->numSrcBytes,
codePtr->numCodeBytes, codePtr->numLitObjects,
codePtr->numAuxDataItems, codePtr->maxStackDepth,
#ifdef TCL_COMPILE_STATS
(codePtr->numSrcBytes?
((float)codePtr->structureSize)/((float)codePtr->numSrcBytes) : 0.0));
#else
0.0);
#endif
#ifdef TCL_COMPILE_STATS
fprintf(stdout, " Code %d = header %d+inst %d+litObj %d+exc %d+aux %d+cmdMap %d\n",
codePtr->structureSize,
(sizeof(ByteCode) - (sizeof(size_t) + sizeof(Tcl_Time))),
codePtr->numCodeBytes,
(codePtr->numLitObjects * sizeof(Tcl_Obj *)),
(codePtr->numExceptRanges * sizeof(ExceptionRange)),
(codePtr->numAuxDataItems * sizeof(AuxData)),
codePtr->numCmdLocBytes);
#endif /* TCL_COMPILE_STATS */
if (procPtr != NULL) {
fprintf(stdout,
" Proc 0x%x, refCt %d, args %d, compiled locals %d\n",
(unsigned int) procPtr, procPtr->refCount,
procPtr->numArgs, procPtr->numCompiledLocals);
}
}
#endif /* TCL_COMPILE_DEBUG */
/*
*----------------------------------------------------------------------
*
* ValidatePcAndStackTop --
*
* This procedure is called by TclExecuteByteCode when debugging to
* verify that the program counter and stack top are valid during
* execution.
*
* Results:
* None.
*
* Side effects:
* Prints a message to stderr and panics if either the pc or stack
* top are invalid.
*
*----------------------------------------------------------------------
*/
#ifdef TCL_COMPILE_DEBUG
static void
ValidatePcAndStackTop(codePtr, pc, stackTop, stackLowerBound)
register ByteCode *codePtr; /* The bytecode whose summary is printed
* to stdout. */
unsigned char *pc; /* Points to first byte of a bytecode
* instruction. The program counter. */
int stackTop; /* Current stack top. Must be between
* stackLowerBound and stackUpperBound
* (inclusive). */
int stackLowerBound; /* Smallest legal value for stackTop. */
{
int stackUpperBound = stackLowerBound + codePtr->maxStackDepth;
/* Greatest legal value for stackTop. */
unsigned int relativePc = (unsigned int) (pc - codePtr->codeStart);
unsigned int codeStart = (unsigned int) codePtr->codeStart;
unsigned int codeEnd = (unsigned int)
(codePtr->codeStart + codePtr->numCodeBytes);
unsigned char opCode = *pc;
if (((unsigned int) pc < codeStart) || ((unsigned int) pc > codeEnd)) {
fprintf(stderr, "\nBad instruction pc 0x%x in TclExecuteByteCode\n",
(unsigned int) pc);
panic("TclExecuteByteCode execution failure: bad pc");
}
if ((unsigned int) opCode > LAST_INST_OPCODE) {
fprintf(stderr, "\nBad opcode %d at pc %u in TclExecuteByteCode\n",
(unsigned int) opCode, relativePc);
panic("TclExecuteByteCode execution failure: bad opcode");
}
if ((stackTop < stackLowerBound) || (stackTop > stackUpperBound)) {
int numChars;
char *cmd = GetSrcInfoForPc(pc, codePtr, &numChars);
char *ellipsis = "";
fprintf(stderr, "\nBad stack top %d at pc %u in TclExecuteByteCode (min %i, max %i)",
stackTop, relativePc, stackLowerBound, stackUpperBound);
if (cmd != NULL) {
if (numChars > 100) {
numChars = 100;
ellipsis = "...";
}
fprintf(stderr, "\n executing %.*s%s\n", numChars, cmd,
ellipsis);
} else {
fprintf(stderr, "\n");
}
panic("TclExecuteByteCode execution failure: bad stack top");
}
}
#endif /* TCL_COMPILE_DEBUG */
/*
*----------------------------------------------------------------------
*
* IllegalExprOperandType --
*
* Used by TclExecuteByteCode to add an error message to errorInfo
* when an illegal operand type is detected by an expression
* instruction. The argument opndPtr holds the operand object in error.
*
* Results:
* None.
*
* Side effects:
* An error message is appended to errorInfo.
*
*----------------------------------------------------------------------
*/
static void
IllegalExprOperandType(interp, pc, opndPtr)
Tcl_Interp *interp; /* Interpreter to which error information
* pertains. */
unsigned char *pc; /* Points to the instruction being executed
* when the illegal type was found. */
Tcl_Obj *opndPtr; /* Points to the operand holding the value
* with the illegal type. */
{
unsigned char opCode = *pc;
Tcl_ResetResult(interp);
if ((opndPtr->bytes == NULL) || (opndPtr->length == 0)) {
Tcl_AppendStringsToObj(Tcl_GetObjResult(interp),
"can't use empty string as operand of \"",
operatorStrings[opCode - INST_LOR], "\"", (char *) NULL);
} else {
char *msg = "non-numeric string";
char *s, *p;
int length;
int looksLikeInt = 0;
s = Tcl_GetStringFromObj(opndPtr, &length);
p = s;
/*
* strtod() isn't at all consistent about detecting Inf and
* NaN between platforms.
*/
if (length == 3) {
if ((s[0]=='n' || s[0]=='N') && (s[1]=='a' || s[1]=='A') &&
(s[2]=='n' || s[2]=='N')) {
msg = "non-numeric floating-point value";
goto makeErrorMessage;
}
if ((s[0]=='i' || s[0]=='I') && (s[1]=='n' || s[1]=='N') &&
(s[2]=='f' || s[2]=='F')) {
msg = "infinite floating-point value";
goto makeErrorMessage;
}
}
/*
* We cannot use TclLooksLikeInt here because it passes strings
* like "10;" [Bug 587140]. We'll accept as "looking like ints"
* for the present purposes any string that looks formally like
* a (decimal|octal|hex) integer.
*/
while (length && isspace(UCHAR(*p))) {
length--;
p++;
}
if (length && ((*p == '+') || (*p == '-'))) {
length--;
p++;
}
if (length) {
if ((*p == '0') && ((*(p+1) == 'x') || (*(p+1) == 'X'))) {
p += 2;
length -= 2;
looksLikeInt = ((length > 0) && isxdigit(UCHAR(*p)));
if (looksLikeInt) {
length--;
p++;
while (length && isxdigit(UCHAR(*p))) {
length--;
p++;
}
}
} else {
looksLikeInt = (length && isdigit(UCHAR(*p)));
if (looksLikeInt) {
length--;
p++;
while (length && isdigit(UCHAR(*p))) {
length--;
p++;
}
}
}
while (length && isspace(UCHAR(*p))) {
length--;
p++;
}
looksLikeInt = !length;
}
if (looksLikeInt) {
/*
* If something that looks like an integer could not be
* converted, then it *must* be a bad octal or too large
* to represent [Bug 542588].
*/
if (TclCheckBadOctal(NULL, s)) {
msg = "invalid octal number";
} else {
msg = "integer value too large to represent";
Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW",
"integer value too large to represent", (char *) NULL);
}
} else {
/*
* See if the operand can be interpreted as a double in
* order to improve the error message.
*/
double d;
if (Tcl_GetDouble((Tcl_Interp *) NULL, s, &d) == TCL_OK) {
msg = "floating-point value";
}
}
makeErrorMessage:
Tcl_AppendStringsToObj(Tcl_GetObjResult(interp), "can't use ",
msg, " as operand of \"", operatorStrings[opCode - INST_LOR],
"\"", (char *) NULL);
}
}
/*
*----------------------------------------------------------------------
*
* GetSrcInfoForPc --
*
* Given a program counter value, finds the closest command in the
* bytecode code unit's CmdLocation array and returns information about
* that command's source: a pointer to its first byte and the number of
* characters.
*
* Results:
* If a command is found that encloses the program counter value, a
* pointer to the command's source is returned and the length of the
* source is stored at *lengthPtr. If multiple commands resulted in
* code at pc, information about the closest enclosing command is
* returned. If no matching command is found, NULL is returned and
* *lengthPtr is unchanged.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static char *
GetSrcInfoForPc(pc, codePtr, lengthPtr)
unsigned char *pc; /* The program counter value for which to
* return the closest command's source info.
* This points to a bytecode instruction
* in codePtr's code. */
ByteCode *codePtr; /* The bytecode sequence in which to look
* up the command source for the pc. */
int *lengthPtr; /* If non-NULL, the location where the
* length of the command's source should be
* stored. If NULL, no length is stored. */
{
register int pcOffset = (pc - codePtr->codeStart);
int numCmds = codePtr->numCommands;
unsigned char *codeDeltaNext, *codeLengthNext;
unsigned char *srcDeltaNext, *srcLengthNext;
int codeOffset, codeLen, codeEnd, srcOffset, srcLen, delta, i;
int bestDist = INT_MAX; /* Distance of pc to best cmd's start pc. */
int bestSrcOffset = -1; /* Initialized to avoid compiler warning. */
int bestSrcLength = -1; /* Initialized to avoid compiler warning. */
if ((pcOffset < 0) || (pcOffset >= codePtr->numCodeBytes)) {
return NULL;
}
/*
* Decode the code and source offset and length for each command. The
* closest enclosing command is the last one whose code started before
* pcOffset.
*/
codeDeltaNext = codePtr->codeDeltaStart;
codeLengthNext = codePtr->codeLengthStart;
srcDeltaNext = codePtr->srcDeltaStart;
srcLengthNext = codePtr->srcLengthStart;
codeOffset = srcOffset = 0;
for (i = 0; i < numCmds; i++) {
if ((unsigned int) (*codeDeltaNext) == (unsigned int) 0xFF) {
codeDeltaNext++;
delta = TclGetInt4AtPtr(codeDeltaNext);
codeDeltaNext += 4;
} else {
delta = TclGetInt1AtPtr(codeDeltaNext);
codeDeltaNext++;
}
codeOffset += delta;
if ((unsigned int) (*codeLengthNext) == (unsigned int) 0xFF) {
codeLengthNext++;
codeLen = TclGetInt4AtPtr(codeLengthNext);
codeLengthNext += 4;
} else {
codeLen = TclGetInt1AtPtr(codeLengthNext);
codeLengthNext++;
}
codeEnd = (codeOffset + codeLen - 1);
if ((unsigned int) (*srcDeltaNext) == (unsigned int) 0xFF) {
srcDeltaNext++;
delta = TclGetInt4AtPtr(srcDeltaNext);
srcDeltaNext += 4;
} else {
delta = TclGetInt1AtPtr(srcDeltaNext);
srcDeltaNext++;
}
srcOffset += delta;
if ((unsigned int) (*srcLengthNext) == (unsigned int) 0xFF) {
srcLengthNext++;
srcLen = TclGetInt4AtPtr(srcLengthNext);
srcLengthNext += 4;
} else {
srcLen = TclGetInt1AtPtr(srcLengthNext);
srcLengthNext++;
}
if (codeOffset > pcOffset) { /* best cmd already found */
break;
} else if (pcOffset <= codeEnd) { /* this cmd's code encloses pc */
int dist = (pcOffset - codeOffset);
if (dist <= bestDist) {
bestDist = dist;
bestSrcOffset = srcOffset;
bestSrcLength = srcLen;
}
}
}
if (bestDist == INT_MAX) {
return NULL;
}
if (lengthPtr != NULL) {
*lengthPtr = bestSrcLength;
}
return (codePtr->source + bestSrcOffset);
}
/*
*----------------------------------------------------------------------
*
* GetExceptRangeForPc --
*
* Given a program counter value, return the closest enclosing
* ExceptionRange.
*
* Results:
* In the normal case, catchOnly is 0 (false) and this procedure
* returns a pointer to the most closely enclosing ExceptionRange
* structure regardless of whether it is a loop or catch exception
* range. This is appropriate when processing a TCL_BREAK or
* TCL_CONTINUE, which will be "handled" either by a loop exception
* range or a closer catch range. If catchOnly is nonzero, this
* procedure ignores loop exception ranges and returns a pointer to the
* closest catch range. If no matching ExceptionRange is found that
* encloses pc, a NULL is returned.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static ExceptionRange *
GetExceptRangeForPc(pc, catchOnly, codePtr)
unsigned char *pc; /* The program counter value for which to
* search for a closest enclosing exception
* range. This points to a bytecode
* instruction in codePtr's code. */
int catchOnly; /* If 0, consider either loop or catch
* ExceptionRanges in search. If nonzero
* consider only catch ranges (and ignore
* any closer loop ranges). */
ByteCode* codePtr; /* Points to the ByteCode in which to search
* for the enclosing ExceptionRange. */
{
ExceptionRange *rangeArrayPtr;
int numRanges = codePtr->numExceptRanges;
register ExceptionRange *rangePtr;
int pcOffset = (pc - codePtr->codeStart);
register int start;
if (numRanges == 0) {
return NULL;
}
/*
* This exploits peculiarities of our compiler: nested ranges
* are always *after* their containing ranges, so that by scanning
* backwards we are sure that the first matching range is indeed
* the deepest.
*/
rangeArrayPtr = codePtr->exceptArrayPtr;
rangePtr = rangeArrayPtr + numRanges;
while (--rangePtr >= rangeArrayPtr) {
start = rangePtr->codeOffset;
if ((start <= pcOffset) &&
(pcOffset < (start + rangePtr->numCodeBytes))) {
if ((!catchOnly)
|| (rangePtr->type == CATCH_EXCEPTION_RANGE)) {
return rangePtr;
}
}
}
return NULL;
}
/*
*----------------------------------------------------------------------
*
* GetOpcodeName --
*
* This procedure is called by the TRACE and TRACE_WITH_OBJ macros
* used in TclExecuteByteCode when debugging. It returns the name of
* the bytecode instruction at a specified instruction pc.
*
* Results:
* A character string for the instruction.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
#ifdef TCL_COMPILE_DEBUG
static char *
GetOpcodeName(pc)
unsigned char *pc; /* Points to the instruction whose name
* should be returned. */
{
unsigned char opCode = *pc;
return tclInstructionTable[opCode].name;
}
#endif /* TCL_COMPILE_DEBUG */
/*
*----------------------------------------------------------------------
*
* VerifyExprObjType --
*
* This procedure is called by the math functions to verify that
* the object is either an int or double, coercing it if necessary.
* If an error occurs during conversion, an error message is left
* in the interpreter's result unless "interp" is NULL.
*
* Results:
* TCL_OK if it was int or double, TCL_ERROR otherwise
*
* Side effects:
* objPtr is ensured to be of tclIntType, tclWideIntType or
* tclDoubleType.
*
*----------------------------------------------------------------------
*/
static int
VerifyExprObjType(interp, objPtr)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
Tcl_Obj *objPtr; /* Points to the object to type check. */
{
if (IS_NUMERIC_TYPE(objPtr->typePtr)) {
return TCL_OK;
} else {
int length, result = TCL_OK;
char *s = Tcl_GetStringFromObj(objPtr, &length);
if (TclLooksLikeInt(s, length)) {
Tcl_WideInt w;
result = Tcl_GetWideIntFromObj((Tcl_Interp *) NULL, objPtr, &w);
} else {
double d;
result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, objPtr, &d);
}
if ((result != TCL_OK) && (interp != NULL)) {
Tcl_ResetResult(interp);
if (TclCheckBadOctal((Tcl_Interp *) NULL, s)) {
Tcl_AppendToObj(Tcl_GetObjResult(interp),
"argument to math function was an invalid octal number",
-1);
} else {
Tcl_AppendToObj(Tcl_GetObjResult(interp),
"argument to math function didn't have numeric value",
-1);
}
}
return result;
}
}
/*
*----------------------------------------------------------------------
*
* Math Functions --
*
* This page contains the procedures that implement all of the
* built-in math functions for expressions.
*
* Results:
* Each procedure returns TCL_OK if it succeeds and pushes an
* Tcl object holding the result. If it fails it returns TCL_ERROR
* and leaves an error message in the interpreter's result.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static int
ExprUnaryFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Contains the address of a procedure that
* takes one double argument and returns a
* double result. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
register Tcl_Obj *valuePtr;
double d, dResult;
int result;
double (*func) _ANSI_ARGS_((double)) =
(double (*)_ANSI_ARGS_((double))) clientData;
/*
* Set stackPtr and stackTop from eePtr.
*/
result = TCL_OK;
CACHE_STACK_INFO();
/*
* Pop the function's argument from the evaluation stack. Convert it
* to a double if necessary.
*/
valuePtr = POP_OBJECT();
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
result = TCL_ERROR;
goto done;
}
GET_DOUBLE_VALUE(d, valuePtr, valuePtr->typePtr);
errno = 0;
dResult = (*func)(d);
if ((errno != 0) || IS_NAN(dResult) || IS_INF(dResult)) {
TclExprFloatError(interp, dResult);
result = TCL_ERROR;
goto done;
}
/*
* Push a Tcl object holding the result.
*/
PUSH_OBJECT(Tcl_NewDoubleObj(dResult));
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
return result;
}
static int
ExprBinaryFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Contains the address of a procedure that
* takes two double arguments and
* returns a double result. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
register Tcl_Obj *valuePtr, *value2Ptr;
double d1, d2, dResult;
int result;
double (*func) _ANSI_ARGS_((double, double))
= (double (*)_ANSI_ARGS_((double, double))) clientData;
/*
* Set stackPtr and stackTop from eePtr.
*/
result = TCL_OK;
CACHE_STACK_INFO();
/*
* Pop the function's two arguments from the evaluation stack. Convert
* them to doubles if necessary.
*/
value2Ptr = POP_OBJECT();
valuePtr = POP_OBJECT();
if ((VerifyExprObjType(interp, valuePtr) != TCL_OK) ||
(VerifyExprObjType(interp, value2Ptr) != TCL_OK)) {
result = TCL_ERROR;
goto done;
}
GET_DOUBLE_VALUE(d1, valuePtr, valuePtr->typePtr);
GET_DOUBLE_VALUE(d2, value2Ptr, value2Ptr->typePtr);
errno = 0;
dResult = (*func)(d1, d2);
if ((errno != 0) || IS_NAN(dResult) || IS_INF(dResult)) {
TclExprFloatError(interp, dResult);
result = TCL_ERROR;
goto done;
}
/*
* Push a Tcl object holding the result.
*/
PUSH_OBJECT(Tcl_NewDoubleObj(dResult));
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
TclDecrRefCount(valuePtr);
TclDecrRefCount(value2Ptr);
DECACHE_STACK_INFO();
return result;
}
static int
ExprAbsFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Ignored. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
register Tcl_Obj *valuePtr;
long i, iResult;
double d, dResult;
int result;
/*
* Set stackPtr and stackTop from eePtr.
*/
result = TCL_OK;
CACHE_STACK_INFO();
/*
* Pop the argument from the evaluation stack.
*/
valuePtr = POP_OBJECT();
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
result = TCL_ERROR;
goto done;
}
/*
* Push a Tcl object with the result.
*/
if (valuePtr->typePtr == &tclIntType) {
i = valuePtr->internalRep.longValue;
if (i < 0) {
iResult = -i;
if (iResult < 0) {
Tcl_ResetResult(interp);
Tcl_AppendToObj(Tcl_GetObjResult(interp),
"integer value too large to represent", -1);
Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW",
"integer value too large to represent", (char *) NULL);
result = TCL_ERROR;
goto done;
}
} else {
iResult = i;
}
PUSH_OBJECT(Tcl_NewLongObj(iResult));
} else if (valuePtr->typePtr == &tclWideIntType) {
Tcl_WideInt wResult, w;
TclGetWide(w,valuePtr);
if (w < W0) {
wResult = -w;
if (wResult < 0) {
Tcl_ResetResult(interp);
Tcl_AppendToObj(Tcl_GetObjResult(interp),
"integer value too large to represent", -1);
Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW",
"integer value too large to represent", (char *) NULL);
result = TCL_ERROR;
goto done;
}
} else {
wResult = w;
}
PUSH_OBJECT(Tcl_NewWideIntObj(wResult));
} else {
d = valuePtr->internalRep.doubleValue;
if (d < 0.0) {
dResult = -d;
} else {
dResult = d;
}
if (IS_NAN(dResult) || IS_INF(dResult)) {
TclExprFloatError(interp, dResult);
result = TCL_ERROR;
goto done;
}
PUSH_OBJECT(Tcl_NewDoubleObj(dResult));
}
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
return result;
}
static int
ExprDoubleFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Ignored. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
register Tcl_Obj *valuePtr;
double dResult;
int result;
/*
* Set stackPtr and stackTop from eePtr.
*/
result = TCL_OK;
CACHE_STACK_INFO();
/*
* Pop the argument from the evaluation stack.
*/
valuePtr = POP_OBJECT();
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
result = TCL_ERROR;
goto done;
}
GET_DOUBLE_VALUE(dResult, valuePtr, valuePtr->typePtr);
/*
* Push a Tcl object with the result.
*/
PUSH_OBJECT(Tcl_NewDoubleObj(dResult));
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
return result;
}
static int
ExprIntFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Ignored. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
register Tcl_Obj *valuePtr;
long iResult;
double d;
int result;
/*
* Set stackPtr and stackTop from eePtr.
*/
result = TCL_OK;
CACHE_STACK_INFO();
/*
* Pop the argument from the evaluation stack.
*/
valuePtr = POP_OBJECT();
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
result = TCL_ERROR;
goto done;
}
if (valuePtr->typePtr == &tclIntType) {
iResult = valuePtr->internalRep.longValue;
} else if (valuePtr->typePtr == &tclWideIntType) {
TclGetLongFromWide(iResult,valuePtr);
} else {
d = valuePtr->internalRep.doubleValue;
if (d < 0.0) {
if (d < (double) (long) LONG_MIN) {
tooLarge:
Tcl_ResetResult(interp);
Tcl_AppendToObj(Tcl_GetObjResult(interp),
"integer value too large to represent", -1);
Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW",
"integer value too large to represent", (char *) NULL);
result = TCL_ERROR;
goto done;
}
} else {
if (d > (double) LONG_MAX) {
goto tooLarge;
}
}
if (IS_NAN(d) || IS_INF(d)) {
TclExprFloatError(interp, d);
result = TCL_ERROR;
goto done;
}
iResult = (long) d;
}
/*
* Push a Tcl object with the result.
*/
PUSH_OBJECT(Tcl_NewLongObj(iResult));
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
return result;
}
static int
ExprWideFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Ignored. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
register Tcl_Obj *valuePtr;
Tcl_WideInt wResult;
double d;
int result;
/*
* Set stackPtr and stackTop from eePtr.
*/
result = TCL_OK;
CACHE_STACK_INFO();
/*
* Pop the argument from the evaluation stack.
*/
valuePtr = POP_OBJECT();
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
result = TCL_ERROR;
goto done;
}
if (valuePtr->typePtr == &tclWideIntType) {
TclGetWide(wResult,valuePtr);
} else if (valuePtr->typePtr == &tclIntType) {
wResult = Tcl_LongAsWide(valuePtr->internalRep.longValue);
} else {
d = valuePtr->internalRep.doubleValue;
if (d < 0.0) {
if (d < Tcl_WideAsDouble(LLONG_MIN)) {
tooLarge:
Tcl_ResetResult(interp);
Tcl_AppendToObj(Tcl_GetObjResult(interp),
"integer value too large to represent", -1);
Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW",
"integer value too large to represent", (char *) NULL);
result = TCL_ERROR;
goto done;
}
} else {
if (d > Tcl_WideAsDouble(LLONG_MAX)) {
goto tooLarge;
}
}
if (IS_NAN(d) || IS_INF(d)) {
TclExprFloatError(interp, d);
result = TCL_ERROR;
goto done;
}
wResult = Tcl_DoubleAsWide(d);
}
/*
* Push a Tcl object with the result.
*/
PUSH_OBJECT(Tcl_NewWideIntObj(wResult));
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
return result;
}
static int
ExprRandFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Ignored. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
Interp *iPtr = (Interp *) interp;
double dResult;
long tmp; /* Algorithm assumes at least 32 bits.
* Only long guarantees that. See below. */
if (!(iPtr->flags & RAND_SEED_INITIALIZED)) {
iPtr->flags |= RAND_SEED_INITIALIZED;
/*
* Take into consideration the thread this interp is running in order
* to insure different seeds in different threads (bug #416643)
*/
iPtr->randSeed = TclpGetClicks() + ((long)Tcl_GetCurrentThread()<<12);
/*
* Make sure 1 <= randSeed <= (2^31) - 2. See below.
*/
iPtr->randSeed &= (unsigned long) 0x7fffffff;
if ((iPtr->randSeed == 0) || (iPtr->randSeed == 0x7fffffff)) {
iPtr->randSeed ^= 123459876;
}
}
/*
* Set stackPtr and stackTop from eePtr.
*/
CACHE_STACK_INFO();
/*
* Generate the random number using the linear congruential
* generator defined by the following recurrence:
* seed = ( IA * seed ) mod IM
* where IA is 16807 and IM is (2^31) - 1. The recurrence maps
* a seed in the range [1, IM - 1] to a new seed in that same range.
* The recurrence maps IM to 0, and maps 0 back to 0, so those two
* values must not be allowed as initial values of seed.
*
* In order to avoid potential problems with integer overflow, the
* recurrence is implemented in terms of additional constants
* IQ and IR such that
* IM = IA*IQ + IR
* None of the operations in the implementation overflows a 32-bit
* signed integer, and the C type long is guaranteed to be at least
* 32 bits wide.
*
* For more details on how this algorithm works, refer to the following
* papers:
*
* S.K. Park & K.W. Miller, "Random number generators: good ones
* are hard to find," Comm ACM 31(10):1192-1201, Oct 1988
*
* W.H. Press & S.A. Teukolsky, "Portable random number
* generators," Computers in Physics 6(5):522-524, Sep/Oct 1992.
*/
#define RAND_IA 16807
#define RAND_IM 2147483647
#define RAND_IQ 127773
#define RAND_IR 2836
#define RAND_MASK 123459876
tmp = iPtr->randSeed/RAND_IQ;
iPtr->randSeed = RAND_IA*(iPtr->randSeed - tmp*RAND_IQ) - RAND_IR*tmp;
if (iPtr->randSeed < 0) {
iPtr->randSeed += RAND_IM;
}
/*
* Since the recurrence keeps seed values in the range [1, RAND_IM - 1],
* dividing by RAND_IM yields a double in the range (0, 1).
*/
dResult = iPtr->randSeed * (1.0/RAND_IM);
/*
* Push a Tcl object with the result.
*/
PUSH_OBJECT(Tcl_NewDoubleObj(dResult));
/*
* Reflect the change to stackTop back in eePtr.
*/
DECACHE_STACK_INFO();
return TCL_OK;
}
static int
ExprRoundFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Ignored. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
Tcl_Obj *valuePtr;
long iResult;
double d, temp;
int result;
/*
* Set stackPtr and stackTop from eePtr.
*/
result = TCL_OK;
CACHE_STACK_INFO();
/*
* Pop the argument from the evaluation stack.
*/
valuePtr = POP_OBJECT();
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
result = TCL_ERROR;
goto done;
}
if (valuePtr->typePtr == &tclIntType) {
iResult = valuePtr->internalRep.longValue;
} else if (valuePtr->typePtr == &tclWideIntType) {
Tcl_WideInt w;
TclGetWide(w,valuePtr);
PUSH_OBJECT(Tcl_NewWideIntObj(w));
goto done;
} else {
d = valuePtr->internalRep.doubleValue;
if (d < 0.0) {
if (d <= (((double) (long) LONG_MIN) - 0.5)) {
tooLarge:
Tcl_ResetResult(interp);
Tcl_AppendToObj(Tcl_GetObjResult(interp),
"integer value too large to represent", -1);
Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW",
"integer value too large to represent",
(char *) NULL);
result = TCL_ERROR;
goto done;
}
temp = (long) (d - 0.5);
} else {
if (d >= (((double) LONG_MAX + 0.5))) {
goto tooLarge;
}
temp = (long) (d + 0.5);
}
if (IS_NAN(temp) || IS_INF(temp)) {
TclExprFloatError(interp, temp);
result = TCL_ERROR;
goto done;
}
iResult = (long) temp;
}
/*
* Push a Tcl object with the result.
*/
PUSH_OBJECT(Tcl_NewLongObj(iResult));
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
return result;
}
static int
ExprSrandFunc(interp, eePtr, clientData)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
ClientData clientData; /* Ignored. */
{
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
Interp *iPtr = (Interp *) interp;
Tcl_Obj *valuePtr;
long i = 0; /* Initialized to avoid compiler warning. */
/*
* Set stackPtr and stackTop from eePtr.
*/
CACHE_STACK_INFO();
/*
* Pop the argument from the evaluation stack. Use the value
* to reset the random number seed.
*/
valuePtr = POP_OBJECT();
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
goto badValue;
}
if (valuePtr->typePtr == &tclIntType) {
i = valuePtr->internalRep.longValue;
} else if (valuePtr->typePtr == &tclWideIntType) {
TclGetLongFromWide(i,valuePtr);
} else {
/*
* At this point, the only other possible type is double
*/
Tcl_ResetResult(interp);
Tcl_AppendStringsToObj(Tcl_GetObjResult(interp),
"can't use floating-point value as argument to srand",
(char *) NULL);
badValue:
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
return TCL_ERROR;
}
/*
* Reset the seed. Make sure 1 <= randSeed <= 2^31 - 2.
* See comments in ExprRandFunc() for more details.
*/
iPtr->flags |= RAND_SEED_INITIALIZED;
iPtr->randSeed = i;
iPtr->randSeed &= (unsigned long) 0x7fffffff;
if ((iPtr->randSeed == 0) || (iPtr->randSeed == 0x7fffffff)) {
iPtr->randSeed ^= 123459876;
}
/*
* To avoid duplicating the random number generation code we simply
* clean up our state and call the real random number function. That
* function will always succeed.
*/
TclDecrRefCount(valuePtr);
DECACHE_STACK_INFO();
ExprRandFunc(interp, eePtr, clientData);
return TCL_OK;
}
/*
*----------------------------------------------------------------------
*
* ExprCallMathFunc --
*
* This procedure is invoked to call a non-builtin math function
* during the execution of an expression.
*
* Results:
* TCL_OK is returned if all went well and the function's value
* was computed successfully. If an error occurred, TCL_ERROR
* is returned and an error message is left in the interpreter's
* result. After a successful return this procedure pushes a Tcl object
* holding the result.
*
* Side effects:
* None, unless the called math function has side effects.
*
*----------------------------------------------------------------------
*/
static int
ExprCallMathFunc(interp, eePtr, objc, objv)
Tcl_Interp *interp; /* The interpreter in which to execute the
* function. */
ExecEnv *eePtr; /* Points to the environment for executing
* the function. */
int objc; /* Number of arguments. The function name is
* the 0-th argument. */
Tcl_Obj **objv; /* The array of arguments. The function name
* is objv[0]. */
{
Interp *iPtr = (Interp *) interp;
Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */
register int stackTop; /* Cached top index of evaluation stack. */
char *funcName;
Tcl_HashEntry *hPtr;
MathFunc *mathFuncPtr; /* Information about math function. */
Tcl_Value args[MAX_MATH_ARGS]; /* Arguments for function call. */
Tcl_Value funcResult; /* Result of function call as Tcl_Value. */
register Tcl_Obj *valuePtr;
long i;
double d;
int j, k, result;
Tcl_ResetResult(interp);
/*
* Set stackPtr and stackTop from eePtr.
*/
CACHE_STACK_INFO();
/*
* Look up the MathFunc record for the function.
*/
funcName = TclGetString(objv[0]);
hPtr = Tcl_FindHashEntry(&iPtr->mathFuncTable, funcName);
if (hPtr == NULL) {
Tcl_AppendStringsToObj(Tcl_GetObjResult(interp),
"unknown math function \"", funcName, "\"", (char *) NULL);
result = TCL_ERROR;
goto done;
}
mathFuncPtr = (MathFunc *) Tcl_GetHashValue(hPtr);
if (mathFuncPtr->numArgs != (objc-1)) {
panic("ExprCallMathFunc: expected number of args %d != actual number %d",
mathFuncPtr->numArgs, objc);
result = TCL_ERROR;
goto done;
}
/*
* Collect the arguments for the function, if there are any, into the
* array "args". Note that args[0] will have the Tcl_Value that
* corresponds to objv[1].
*/
for (j = 1, k = 0; j < objc; j++, k++) {
valuePtr = objv[j];
if (VerifyExprObjType(interp, valuePtr) != TCL_OK) {
result = TCL_ERROR;
goto done;
}
/*
* Copy the object's numeric value to the argument record,
* converting it if necessary.
*/
if (valuePtr->typePtr == &tclIntType) {
i = valuePtr->internalRep.longValue;
if (mathFuncPtr->argTypes[k] == TCL_DOUBLE) {
args[k].type = TCL_DOUBLE;
args[k].doubleValue = i;
} else if (mathFuncPtr->argTypes[k] == TCL_WIDE_INT) {
args[k].type = TCL_WIDE_INT;
args[k].wideValue = Tcl_LongAsWide(i);
} else {
args[k].type = TCL_INT;
args[k].intValue = i;
}
} else if (valuePtr->typePtr == &tclWideIntType) {
Tcl_WideInt w;
TclGetWide(w,valuePtr);
if (mathFuncPtr->argTypes[k] == TCL_DOUBLE) {
args[k].type = TCL_DOUBLE;
args[k].doubleValue = Tcl_WideAsDouble(w);
} else if (mathFuncPtr->argTypes[k] == TCL_INT) {
args[k].type = TCL_INT;
args[k].intValue = Tcl_WideAsLong(w);
} else {
args[k].type = TCL_WIDE_INT;
args[k].wideValue = w;
}
} else {
d = valuePtr->internalRep.doubleValue;
if (mathFuncPtr->argTypes[k] == TCL_INT) {
args[k].type = TCL_INT;
args[k].intValue = (long) d;
} else if (mathFuncPtr->argTypes[k] == TCL_WIDE_INT) {
args[k].type = TCL_WIDE_INT;
args[k].wideValue = Tcl_DoubleAsWide(d);
} else {
args[k].type = TCL_DOUBLE;
args[k].doubleValue = d;
}
}
}
/*
* Invoke the function and copy its result back into valuePtr.
*/
result = (*mathFuncPtr->proc)(mathFuncPtr->clientData, interp, args,
&funcResult);
if (result != TCL_OK) {
goto done;
}
/*
* Pop the objc top stack elements and decrement their ref counts.
*/
k = (stackTop - (objc-1));
while (stackTop >= k) {
valuePtr = POP_OBJECT();
TclDecrRefCount(valuePtr);
}
/*
* Push the call's object result.
*/
if (funcResult.type == TCL_INT) {
PUSH_OBJECT(Tcl_NewLongObj(funcResult.intValue));
} else if (funcResult.type == TCL_WIDE_INT) {
PUSH_OBJECT(Tcl_NewWideIntObj(funcResult.wideValue));
} else {
d = funcResult.doubleValue;
if (IS_NAN(d) || IS_INF(d)) {
TclExprFloatError(interp, d);
result = TCL_ERROR;
goto done;
}
PUSH_OBJECT(Tcl_NewDoubleObj(d));
}
/*
* Reflect the change to stackTop back in eePtr.
*/
done:
DECACHE_STACK_INFO();
return result;
}
/*
*----------------------------------------------------------------------
*
* TclExprFloatError --
*
* This procedure is called when an error occurs during a
* floating-point operation. It reads errno and sets
* interp->objResultPtr accordingly.
*
* Results:
* interp->objResultPtr is set to hold an error message.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
void
TclExprFloatError(interp, value)
Tcl_Interp *interp; /* Where to store error message. */
double value; /* Value returned after error; used to
* distinguish underflows from overflows. */
{
char *s;
Tcl_ResetResult(interp);
if ((errno == EDOM) || IS_NAN(value)) {
s = "domain error: argument not in valid range";
Tcl_AppendToObj(Tcl_GetObjResult(interp), s, -1);
Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", s, (char *) NULL);
} else if ((errno == ERANGE) || IS_INF(value)) {
if (value == 0.0) {
s = "floating-point value too small to represent";
Tcl_AppendToObj(Tcl_GetObjResult(interp), s, -1);
Tcl_SetErrorCode(interp, "ARITH", "UNDERFLOW", s, (char *) NULL);
} else {
s = "floating-point value too large to represent";
Tcl_AppendToObj(Tcl_GetObjResult(interp), s, -1);
Tcl_SetErrorCode(interp, "ARITH", "OVERFLOW", s, (char *) NULL);
}
} else {
char msg[64 + TCL_INTEGER_SPACE];
sprintf(msg, "unknown floating-point error, errno = %d", errno);
Tcl_AppendToObj(Tcl_GetObjResult(interp), msg, -1);
Tcl_SetErrorCode(interp, "ARITH", "UNKNOWN", msg, (char *) NULL);
}
}
#ifdef TCL_COMPILE_STATS
/*
*----------------------------------------------------------------------
*
* TclLog2 --
*
* Procedure used while collecting compilation statistics to determine
* the log base 2 of an integer.
*
* Results:
* Returns the log base 2 of the operand. If the argument is less
* than or equal to zero, a zero is returned.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
TclLog2(value)
register int value; /* The integer for which to compute the
* log base 2. */
{
register int n = value;
register int result = 0;
while (n > 1) {
n = n >> 1;
result++;
}
return result;
}
/*
*----------------------------------------------------------------------
*
* EvalStatsCmd --
*
* Implements the "evalstats" command that prints instruction execution
* counts to stdout.
*
* Results:
* Standard Tcl results.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static int
EvalStatsCmd(unused, interp, objc, objv)
ClientData unused; /* Unused. */
Tcl_Interp *interp; /* The current interpreter. */
int objc; /* The number of arguments. */
Tcl_Obj *CONST objv[]; /* The argument strings. */
{
Interp *iPtr = (Interp *) interp;
LiteralTable *globalTablePtr = &(iPtr->literalTable);
ByteCodeStats *statsPtr = &(iPtr->stats);
double totalCodeBytes, currentCodeBytes;
double totalLiteralBytes, currentLiteralBytes;
double objBytesIfUnshared, strBytesIfUnshared, sharingBytesSaved;
double strBytesSharedMultX, strBytesSharedOnce;
double numInstructions, currentHeaderBytes;
long numCurrentByteCodes, numByteCodeLits;
long refCountSum, literalMgmtBytes, sum;
int numSharedMultX, numSharedOnce;
int decadeHigh, minSizeDecade, maxSizeDecade, length, i;
char *litTableStats;
LiteralEntry *entryPtr;
numInstructions = 0.0;
for (i = 0; i < 256; i++) {
if (statsPtr->instructionCount[i] != 0) {
numInstructions += statsPtr->instructionCount[i];
}
}
totalLiteralBytes = sizeof(LiteralTable)
+ iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)
+ (statsPtr->numLiteralsCreated * sizeof(LiteralEntry))
+ (statsPtr->numLiteralsCreated * sizeof(Tcl_Obj))
+ statsPtr->totalLitStringBytes;
totalCodeBytes = statsPtr->totalByteCodeBytes + totalLiteralBytes;
numCurrentByteCodes =
statsPtr->numCompilations - statsPtr->numByteCodesFreed;
currentHeaderBytes = numCurrentByteCodes
* (sizeof(ByteCode) - (sizeof(size_t) + sizeof(Tcl_Time)));
literalMgmtBytes = sizeof(LiteralTable)
+ (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *))
+ (iPtr->literalTable.numEntries * sizeof(LiteralEntry));
currentLiteralBytes = literalMgmtBytes
+ iPtr->literalTable.numEntries * sizeof(Tcl_Obj)
+ statsPtr->currentLitStringBytes;
currentCodeBytes = statsPtr->currentByteCodeBytes + currentLiteralBytes;
/*
* Summary statistics, total and current source and ByteCode sizes.
*/
fprintf(stdout, "\n----------------------------------------------------------------\n");
fprintf(stdout,
"Compilation and execution statistics for interpreter 0x%x\n",
(unsigned int) iPtr);
fprintf(stdout, "\nNumber ByteCodes executed %ld\n",
statsPtr->numExecutions);
fprintf(stdout, "Number ByteCodes compiled %ld\n",
statsPtr->numCompilations);
fprintf(stdout, " Mean executions/compile %.1f\n",
((float)statsPtr->numExecutions) / ((float)statsPtr->numCompilations));
fprintf(stdout, "\nInstructions executed %.0f\n",
numInstructions);
fprintf(stdout, " Mean inst/compile %.0f\n",
numInstructions / statsPtr->numCompilations);
fprintf(stdout, " Mean inst/execution %.0f\n",
numInstructions / statsPtr->numExecutions);
fprintf(stdout, "\nTotal ByteCodes %ld\n",
statsPtr->numCompilations);
fprintf(stdout, " Source bytes %.6g\n",
statsPtr->totalSrcBytes);
fprintf(stdout, " Code bytes %.6g\n",
totalCodeBytes);
fprintf(stdout, " ByteCode bytes %.6g\n",
statsPtr->totalByteCodeBytes);
fprintf(stdout, " Literal bytes %.6g\n",
totalLiteralBytes);
fprintf(stdout, " table %d + bkts %d + entries %ld + objects %ld + strings %.6g\n",
sizeof(LiteralTable),
iPtr->literalTable.numBuckets * sizeof(LiteralEntry *),
statsPtr->numLiteralsCreated * sizeof(LiteralEntry),
statsPtr->numLiteralsCreated * sizeof(Tcl_Obj),
statsPtr->totalLitStringBytes);
fprintf(stdout, " Mean code/compile %.1f\n",
totalCodeBytes / statsPtr->numCompilations);
fprintf(stdout, " Mean code/source %.1f\n",
totalCodeBytes / statsPtr->totalSrcBytes);
fprintf(stdout, "\nCurrent (active) ByteCodes %ld\n",
numCurrentByteCodes);
fprintf(stdout, " Source bytes %.6g\n",
statsPtr->currentSrcBytes);
fprintf(stdout, " Code bytes %.6g\n",
currentCodeBytes);
fprintf(stdout, " ByteCode bytes %.6g\n",
statsPtr->currentByteCodeBytes);
fprintf(stdout, " Literal bytes %.6g\n",
currentLiteralBytes);
fprintf(stdout, " table %d + bkts %d + entries %d + objects %d + strings %.6g\n",
sizeof(LiteralTable),
iPtr->literalTable.numBuckets * sizeof(LiteralEntry *),
iPtr->literalTable.numEntries * sizeof(LiteralEntry),
iPtr->literalTable.numEntries * sizeof(Tcl_Obj),
statsPtr->currentLitStringBytes);
fprintf(stdout, " Mean code/source %.1f\n",
currentCodeBytes / statsPtr->currentSrcBytes);
fprintf(stdout, " Code + source bytes %.6g (%0.1f mean code/src)\n",
(currentCodeBytes + statsPtr->currentSrcBytes),
(currentCodeBytes / statsPtr->currentSrcBytes) + 1.0);
/*
* Tcl_IsShared statistics check
*
* This gives the refcount of each obj as Tcl_IsShared was called
* for it. Shared objects must be duplicated before they can be
* modified.
*/
numSharedMultX = 0;
fprintf(stdout, "\nTcl_IsShared object check (all objects):\n");
fprintf(stdout, " Object had refcount <=1 (not shared) %ld\n",
tclObjsShared[1]);
for (i = 2; i < TCL_MAX_SHARED_OBJ_STATS; i++) {
fprintf(stdout, " refcount ==%d %ld\n",
i, tclObjsShared[i]);
numSharedMultX += tclObjsShared[i];
}
fprintf(stdout, " refcount >=%d %ld\n",
i, tclObjsShared[0]);
numSharedMultX += tclObjsShared[0];
fprintf(stdout, " Total shared objects %d\n",
numSharedMultX);
/*
* Literal table statistics.
*/
numByteCodeLits = 0;
refCountSum = 0;
numSharedMultX = 0;
numSharedOnce = 0;
objBytesIfUnshared = 0.0;
strBytesIfUnshared = 0.0;
strBytesSharedMultX = 0.0;
strBytesSharedOnce = 0.0;
for (i = 0; i < globalTablePtr->numBuckets; i++) {
for (entryPtr = globalTablePtr->buckets[i]; entryPtr != NULL;
entryPtr = entryPtr->nextPtr) {
if (entryPtr->objPtr->typePtr == &tclByteCodeType) {
numByteCodeLits++;
}
(void) Tcl_GetStringFromObj(entryPtr->objPtr, &length);
refCountSum += entryPtr->refCount;
objBytesIfUnshared += (entryPtr->refCount * sizeof(Tcl_Obj));
strBytesIfUnshared += (entryPtr->refCount * (length+1));
if (entryPtr->refCount > 1) {
numSharedMultX++;
strBytesSharedMultX += (length+1);
} else {
numSharedOnce++;
strBytesSharedOnce += (length+1);
}
}
}
sharingBytesSaved = (objBytesIfUnshared + strBytesIfUnshared)
- currentLiteralBytes;
fprintf(stdout, "\nTotal objects (all interps) %ld\n",
tclObjsAlloced);
fprintf(stdout, "Current objects %ld\n",
(tclObjsAlloced - tclObjsFreed));
fprintf(stdout, "Total literal objects %ld\n",
statsPtr->numLiteralsCreated);
fprintf(stdout, "\nCurrent literal objects %d (%0.1f%% of current objects)\n",
globalTablePtr->numEntries,
(globalTablePtr->numEntries * 100.0) / (tclObjsAlloced-tclObjsFreed));
fprintf(stdout, " ByteCode literals %ld (%0.1f%% of current literals)\n",
numByteCodeLits,
(numByteCodeLits * 100.0) / globalTablePtr->numEntries);
fprintf(stdout, " Literals reused > 1x %d\n",
numSharedMultX);
fprintf(stdout, " Mean reference count %.2f\n",
((double) refCountSum) / globalTablePtr->numEntries);
fprintf(stdout, " Mean len, str reused >1x %.2f\n",
(numSharedMultX? (strBytesSharedMultX/numSharedMultX) : 0.0));
fprintf(stdout, " Mean len, str used 1x %.2f\n",
(numSharedOnce? (strBytesSharedOnce/numSharedOnce) : 0.0));
fprintf(stdout, " Total sharing savings %.6g (%0.1f%% of bytes if no sharing)\n",
sharingBytesSaved,
(sharingBytesSaved * 100.0) / (objBytesIfUnshared + strBytesIfUnshared));
fprintf(stdout, " Bytes with sharing %.6g\n",
currentLiteralBytes);
fprintf(stdout, " table %d + bkts %d + entries %d + objects %d + strings %.6g\n",
sizeof(LiteralTable),
iPtr->literalTable.numBuckets * sizeof(LiteralEntry *),
iPtr->literalTable.numEntries * sizeof(LiteralEntry),
iPtr->literalTable.numEntries * sizeof(Tcl_Obj),
statsPtr->currentLitStringBytes);
fprintf(stdout, " Bytes if no sharing %.6g = objects %.6g + strings %.6g\n",
(objBytesIfUnshared + strBytesIfUnshared),
objBytesIfUnshared, strBytesIfUnshared);
fprintf(stdout, " String sharing savings %.6g = unshared %.6g - shared %.6g\n",
(strBytesIfUnshared - statsPtr->currentLitStringBytes),
strBytesIfUnshared, statsPtr->currentLitStringBytes);
fprintf(stdout, " Literal mgmt overhead %ld (%0.1f%% of bytes with sharing)\n",
literalMgmtBytes,
(literalMgmtBytes * 100.0) / currentLiteralBytes);
fprintf(stdout, " table %d + buckets %d + entries %d\n",
sizeof(LiteralTable),
iPtr->literalTable.numBuckets * sizeof(LiteralEntry *),
iPtr->literalTable.numEntries * sizeof(LiteralEntry));
/*
* Breakdown of current ByteCode space requirements.
*/
fprintf(stdout, "\nBreakdown of current ByteCode requirements:\n");
fprintf(stdout, " Bytes Pct of Avg per\n");
fprintf(stdout, " total ByteCode\n");
fprintf(stdout, "Total %12.6g 100.00%% %8.1f\n",
statsPtr->currentByteCodeBytes,
statsPtr->currentByteCodeBytes / numCurrentByteCodes);
fprintf(stdout, "Header %12.6g %8.1f%% %8.1f\n",
currentHeaderBytes,
((currentHeaderBytes * 100.0) / statsPtr->currentByteCodeBytes),
currentHeaderBytes / numCurrentByteCodes);
fprintf(stdout, "Instructions %12.6g %8.1f%% %8.1f\n",
statsPtr->currentInstBytes,
((statsPtr->currentInstBytes * 100.0) / statsPtr->currentByteCodeBytes),
statsPtr->currentInstBytes / numCurrentByteCodes);
fprintf(stdout, "Literal ptr array %12.6g %8.1f%% %8.1f\n",
statsPtr->currentLitBytes,
((statsPtr->currentLitBytes * 100.0) / statsPtr->currentByteCodeBytes),
statsPtr->currentLitBytes / numCurrentByteCodes);
fprintf(stdout, "Exception table %12.6g %8.1f%% %8.1f\n",
statsPtr->currentExceptBytes,
((statsPtr->currentExceptBytes * 100.0) / statsPtr->currentByteCodeBytes),
statsPtr->currentExceptBytes / numCurrentByteCodes);
fprintf(stdout, "Auxiliary data %12.6g %8.1f%% %8.1f\n",
statsPtr->currentAuxBytes,
((statsPtr->currentAuxBytes * 100.0) / statsPtr->currentByteCodeBytes),
statsPtr->currentAuxBytes / numCurrentByteCodes);
fprintf(stdout, "Command map %12.6g %8.1f%% %8.1f\n",
statsPtr->currentCmdMapBytes,
((statsPtr->currentCmdMapBytes * 100.0) / statsPtr->currentByteCodeBytes),
statsPtr->currentCmdMapBytes / numCurrentByteCodes);
/*
* Detailed literal statistics.
*/
fprintf(stdout, "\nLiteral string sizes:\n");
fprintf(stdout, " Up to length Percentage\n");
maxSizeDecade = 0;
for (i = 31; i >= 0; i--) {
if (statsPtr->literalCount[i] > 0) {
maxSizeDecade = i;
break;
}
}
sum = 0;
for (i = 0; i <= maxSizeDecade; i++) {
decadeHigh = (1 << (i+1)) - 1;
sum += statsPtr->literalCount[i];
fprintf(stdout, " %10d %8.0f%%\n",
decadeHigh, (sum * 100.0) / statsPtr->numLiteralsCreated);
}
litTableStats = TclLiteralStats(globalTablePtr);
fprintf(stdout, "\nCurrent literal table statistics:\n%s\n",
litTableStats);
ckfree((char *) litTableStats);
/*
* Source and ByteCode size distributions.
*/
fprintf(stdout, "\nSource sizes:\n");
fprintf(stdout, " Up to size Percentage\n");
minSizeDecade = maxSizeDecade = 0;
for (i = 0; i < 31; i++) {
if (statsPtr->srcCount[i] > 0) {
minSizeDecade = i;
break;
}
}
for (i = 31; i >= 0; i--) {
if (statsPtr->srcCount[i] > 0) {
maxSizeDecade = i;
break;
}
}
sum = 0;
for (i = minSizeDecade; i <= maxSizeDecade; i++) {
decadeHigh = (1 << (i+1)) - 1;
sum += statsPtr->srcCount[i];
fprintf(stdout, " %10d %8.0f%%\n",
decadeHigh, (sum * 100.0) / statsPtr->numCompilations);
}
fprintf(stdout, "\nByteCode sizes:\n");
fprintf(stdout, " Up to size Percentage\n");
minSizeDecade = maxSizeDecade = 0;
for (i = 0; i < 31; i++) {
if (statsPtr->byteCodeCount[i] > 0) {
minSizeDecade = i;
break;
}
}
for (i = 31; i >= 0; i--) {
if (statsPtr->byteCodeCount[i] > 0) {
maxSizeDecade = i;
break;
}
}
sum = 0;
for (i = minSizeDecade; i <= maxSizeDecade; i++) {
decadeHigh = (1 << (i+1)) - 1;
sum += statsPtr->byteCodeCount[i];
fprintf(stdout, " %10d %8.0f%%\n",
decadeHigh, (sum * 100.0) / statsPtr->numCompilations);
}
fprintf(stdout, "\nByteCode longevity (excludes Current ByteCodes):\n");
fprintf(stdout, " Up to ms Percentage\n");
minSizeDecade = maxSizeDecade = 0;
for (i = 0; i < 31; i++) {
if (statsPtr->lifetimeCount[i] > 0) {
minSizeDecade = i;
break;
}
}
for (i = 31; i >= 0; i--) {
if (statsPtr->lifetimeCount[i] > 0) {
maxSizeDecade = i;
break;
}
}
sum = 0;
for (i = minSizeDecade; i <= maxSizeDecade; i++) {
decadeHigh = (1 << (i+1)) - 1;
sum += statsPtr->lifetimeCount[i];
fprintf(stdout, " %12.3f %8.0f%%\n",
decadeHigh / 1000.0,
(sum * 100.0) / statsPtr->numByteCodesFreed);
}
/*
* Instruction counts.
*/
fprintf(stdout, "\nInstruction counts:\n");
for (i = 0; i <= LAST_INST_OPCODE; i++) {
if (statsPtr->instructionCount[i]) {
fprintf(stdout, "%20s %8ld %6.1f%%\n",
tclInstructionTable[i].name,
statsPtr->instructionCount[i],
(statsPtr->instructionCount[i]*100.0) / numInstructions);
}
}
fprintf(stdout, "\nInstructions NEVER executed:\n");
for (i = 0; i <= LAST_INST_OPCODE; i++) {
if (statsPtr->instructionCount[i] == 0) {
fprintf(stdout, "%20s\n", tclInstructionTable[i].name);
}
}
#ifdef TCL_MEM_DEBUG
fprintf(stdout, "\nHeap Statistics:\n");
TclDumpMemoryInfo(stdout);
#endif
fprintf(stdout, "\n----------------------------------------------------------------\n");
return TCL_OK;
}
#endif /* TCL_COMPILE_STATS */
#ifdef TCL_COMPILE_DEBUG
/*
*----------------------------------------------------------------------
*
* StringForResultCode --
*
* Procedure that returns a human-readable string representing a
* Tcl result code such as TCL_ERROR.
*
* Results:
* If the result code is one of the standard Tcl return codes, the
* result is a string representing that code such as "TCL_ERROR".
* Otherwise, the result string is that code formatted as a
* sequence of decimal digit characters. Note that the resulting
* string must not be modified by the caller.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static char *
StringForResultCode(result)
int result; /* The Tcl result code for which to
* generate a string. */
{
static char buf[TCL_INTEGER_SPACE];
if ((result >= TCL_OK) && (result <= TCL_CONTINUE)) {
return resultStrings[result];
}
TclFormatInt(buf, result);
return buf;
}
#endif /* TCL_COMPILE_DEBUG */