NAME
GPSD::Parse - Parse, extract use the JSON output from GPS units
SYNOPSIS
use GPSD::Parse;
my $gps = GPSD::Parse->new;
# poll for data
$gps->poll;
# get all TPV data in an href
my $tpv_href = $gps->tpv;
# get individual TPV stats
print $gps->tpv('lat');
print $gps->tpv('lon');
# timestamp of the most recent poll
print $gps->time;
# get all satellites in an href of hrefs
my $sats = $gps->satellites;
# get an individual piece of info from a single sattelite
print $gps->satellites(16, 'ss');
# check which serial device the GPS is connected to
print $gps->device;
DESCRIPTION
Simple, lightweight (core only) distribution that polls gpsd for data
received from a UART (serial/USB) connected GPS receiver over a TCP
connection.
The data is fetched in JSON, and returned as Perl data.
NOTES
Requirements
A version of gpsd <http://catb.org/gpsd/gpsd.html> that returns results
in JSON format is required to have been previously installed. It should
be started at system startup, with the following flags with
system-specific serial port. See the above link for information on
changing the listen IP and port.
sudo gpsd /dev/ttyS0 -n -F /var/log/gpsd.sock
Available Data
Each of the methods that return data have a table in their respective
documentation within the "METHODS" section. Specifically, look at the
tpv(), sattelites() and the more broad sky() method sections to
understand what available data attributes you can extract.
Conversions
All output where applicable defaults to metric (metres). See the metric
parameter in the new() method to change this to use imperial/standard
measurements.
For latitude and longitude, we default to using the signed notation.
You can disable this with the signed parameter in new().
METHODS
new(%args)
Instantiates and returns a new GPSD::Parse object instance.
Parameters:
host => 127.0.0.1
Optional, String: An IP address or fully qualified domain name of the
gpsd server. Defaults to the localhost (127.0.0.1) if not supplied.
port => 2947
Optional, Integer: The TCP port number that the gpsd daemon is running
on. Defaults to 2947 if not sent in.
metric => Bool
Optional, Integer: By default, we return measurements in metric
(metres). Send in a false value (0) to use imperial/standard
measurement conversions (ie. feet). Note that if returning the raw
*JSON* data from the poll() method, the conversions will not be done.
The default raw Perl return will have been converted however.
signed => Bool
Optional, Integer: By default, we use the signed notation for latitude
and longitude. Send in a false value (0) to disable this. Here's an
example:
enabled (default) disabled
----------------- --------
lat: 51.12345678 51.12345678N
lon: -114.123456 114.123456W
We add the letter notation at the end of the result if signed is
disabled.
file => 'filename.ext'
Optional, String: For testing purposes. Instead of reading from a
socket, send in a filename that contains legitimate JSON data saved
from a previous gpsd output and we'll operate on that. Useful also for
re-running previous output.
poll(%args)
Does a poll of gpsd for data, and configures the object with that data.
Parameters:
All parameters are sent in as a hash.
file => $filename
Optional, String: Used for testing, you can send in the name of a JSON
file that contains gpsd JSON data and we'll work with that instead of
polling the GPS device directly. Note that you *must* instantiate the
object with the file parameter in new for this to have any effect and
to bypass the socket creation.
return => 'json'
Optional, String: By default, after configuring the object, we will
return the polled raw data as a Perl hash reference. Send this param in
with the value of 'json' and we'll return the data exactly as we
received it from gpsd.
Returns:
The raw poll data as either a Perl hash reference structure or as the
original JSON string.
tpv($stat)
TPV stands for "Time Position Velocity". This is the data that
represents your location and other vital statistics.
By default, we return a hash reference that is in the format stat =
'value'>.
Parameters:
$stat
Optional, String. You can extract individual statistics of the TPV data
by sending in the name of the stat you wish to fetch. This will then
return the string value if available. Returns an empty string if the
statistic doesn't exist.
Available statistic/info name, example value, description. This is the
default raw result:
time => '2017-05-16T22:29:29.000Z' # date/time in UTC
lon => '-114.000000000' # longitude
lat => '51.000000' # latitude
alt => '1084.9' # altitude (metres)
climb => '0' # rate of ascent/decent (metres/sec)
speed => '0' # rate of movement (metres/sec)
track => '279.85' # heading (degrees from true north)
device => '/dev/ttyS0' # GPS serial interface
mode => 3 # NMEA mode
epx => '3.636' # longitude error estimate (metres)
epy => '4.676' # latitude error estimate (metres)
epc => '8.16' # ascent/decent error estimate (meters)
ept => '0.005' # timestamp error (sec)
epv => '4.082' # altitude error estimate (meters)
eps => '9.35' # speed error estimate (metres/sec)
class => 'TPV' # data type (fixed as TPV)
tag => 'ZDA' # identifier
satellites($num, $stat)
This method returns a hash reference of hash references, where the key
is the satellite number, and the value is a hashref that contains the
various information related to the specific numbered satellite.
Note that the data returned by this function has been manipuated and is
not exactly equivalent of that returned by gpsd. To get the raw data,
see sky().
Parameters:
$num
Optional, Integer: Send in the satellite number and we'll return the
relevant information in a hash reference for the specific satellite
requested, as opposed to returning data for all the satellites. Returns
undef if a satellite by that number doesn't exist.
$stat
Optional, String: Like tpv(), you can request an individual piece of
information for a satellite. This parameter is only valid if you've
sent in the $num param, and the specified satellite exists.
Available statistic/information items available for each satellite,
including the name, an example value and a description:
NOTE: The PRN attribute will not appear unless you're using raw data.
The PRN can be found as the satellite hash reference key after we've
processed the data.
PRN => 16 # PRN ID of the satellite
# 1-63 are GNSS satellites
# 64-96 are GLONASS satellites
# 100-164 are SBAS satellites
ss => 20 # signal strength (dB)
az => 161 # azimuth (degrees from true north)
used => 1 # currently being used in calculations
el => 88 # elevation in degrees
sky
Returns a hash reference containing all of the data that was pulled
from the SKY information returned by gpsd. This information contains
satellite info and other related statistics.
Available information, with the attribute, example value and
description:
satellites => [] # array of satellite hashrefs
xdop => '0.97' # longitudinal dilution of precision
ydop => '1.25' # latitudinal dilution of precision
pdop => '1.16' # spherical dilution of precision
tdop => '2.2' # time dilution of precision
vdop => '0.71' # altitude dilution of precision
gdop => '3.87' # hyperspherical dilution of precision
hdop => '0.92' # horizontal dilution of precision
class => 'SKY' # object class, hardcoded to SKY
tag => 'ZDA' # object ID
device => '/dev/ttyS0' # serial port connected to the GPS
direction($degree)
Converts a degree from true north into a direction (eg: ESE, SW etc).
Parameters:
$degree
Mandatory, Ineger/Decimal: A decimal ranging from 0-360. Returns the
direction representing the degree from true north. A common example
would be:
my $heading = $gps->direction($gps->tpv('track'));
Degree/direction map:
N 348.75 - 11.25
NNE 11.25 - 33.75
NE 33.75 - 56.25
ENE 56.25 - 78.75
E 78.75 - 101.25
ESE 101.25 - 123.75
SE 123.75 - 146.25
SSE 146.25 - 168.75
S 168.75 - 191.25
SSW 191.25 - 213.75
SW 213.75 - 236.25
WSW 236.25 - 258.75
W 258.75 - 281.25
WNW 281.25 - 303.75
NW 303.75 - 326.25
NNW 326.25 - 348.75
device
Returns a string containing the actual device the GPS is connected to
(eg: /dev/ttyS0).
time
Returns a string of the date and time of the most recent poll, in UTC.
on
Puts gpsd in listening mode, ready to poll data from.
We call this method internally when the object is instantiated with
new() if we're not in file mode. Likewise, when the object is destroyed
(end of program run), we call the subsequent off() method.
If you have long periods of a program run where you don't need the GPS,
you can manually run the off() and on() methods to disable and
re-enable the GPS.
off
Turns off gpsd listening mode.
Not necessary to call, but it will help preserve battery life if
running on a portable device for long program runs where the GPS is
used infrequently. Use in conjunction with on(). We call off()
automatically when the object goes out of scope (program end for
example).
EXAMPLE
Here's a simple example using some of the basic features and options.
use warnings;
use strict;
use feature 'say';
use GPSD::Parse;
my $fname = 't/data/gps.json';
my $gps = GPSD::Parse->new(file => $fname, signed => 0);
$gps->poll;
my $lat = $gps->tpv('lat');
my $lon = $gps->tpv('lon');
my $heading = $gps->tpv('track');
my $direction = $gps->direction($heading);
my $altitude = $gps->tpv('alt');
my $speed = $gps->tpv('speed');
say "latitude: $lat";
say "longitude: $lon\n";
say "heading: $heading degrees";
say "direction: $direction\n";
say "altitude: $altitude metres\n";
say "speed: $speed metres/sec";
Output:
latitude: 51.1111111N
longitude: 114.11111111W
heading: 31.23 degrees
direction: NNE
altitude: 1080.9 metres
speed: 0.333 metres/sec
SEE ALSO
A very similar distribution is Net::GPSD3. However, it has a long line
of prerequisite distributions that didn't always install easily on my
primary target platform, the Raspberry Pi.
This distribution isn't meant to replace that one, it's just a much
simpler and more lightweight piece of software that pretty much does
the same thing.
AUTHOR
Steve Bertrand, <steveb at cpan.org>
LICENSE AND COPYRIGHT
Copyright 2017 Steve Bertrand.
This program is free software; you can redistribute it and/or modify it
under the terms of either: the GNU General Public License as published
by the Free Software Foundation; or the Artistic License.
See http://dev.perl.org/licenses/ for more information.