package File::Spec::VMS;
require File::Spec::Unix;
our $VERSION = '3.2701';
our @ISA = qw(File::Spec::Unix);
use File::Basename;
use VMS::Filespec;
=head1 NAME
File::Spec::VMS - methods for VMS file specs
=head1 SYNOPSIS
require File::Spec::VMS; # Done internally by File::Spec if needed
=head1 DESCRIPTION
See File::Spec::Unix for a documentation of the methods provided
there. This package overrides the implementation of these methods, not
the semantics.
=over 4
=item canonpath (override)
Removes redundant portions of file specifications according to VMS syntax.
=cut
sub canonpath {
my @($self,?$path) = @_;
return undef unless defined $path;
if ($path =~ m|/|) { # Fake Unix
my $pathify = $path =~ m|/\Z(?!\n)|;
$path = $self->SUPER::canonpath($path);
if ($pathify) { return vmspath($path); }
else { return vmsify($path); }
}
else {
$path =~ s/</[/g;
$path =~ s/>/]/g; # < and > ==> [ and ]
$path =~ s/\]\[\./\.\]\[/g; # ][. ==> .][
$path =~ s/\[000000\.\]\[/\[/g; # [000000.][ ==> [
$path =~ s/\[000000\./\[/g; # [000000. ==> [
$path =~ s/\.\]\[000000\]/\]/g; # .][000000] ==> ]
$path =~ s/\.\]\[/\./g; # foo.][bar ==> foo.bar
1 while ($path =~ s/([\[\.])(-+)\.(-+)([\.\]])/$1$2$3$4/);
# That loop does the following
# with any amount of dashes:
# .-.-. ==> .--.
# [-.-. ==> [--.
# .-.-] ==> .--]
# [-.-] ==> [--]
1 while ($path =~ s/([\[\.])[^\]\.]+\.-(-+)([\]\.])/$1$2$3/);
# That loop does the following
# with any amount (minimum 2)
# of dashes:
# .foo.--. ==> .-.
# .foo.--] ==> .-]
# [foo.--. ==> [-.
# [foo.--] ==> [-]
#
# And then, the remaining cases
$path =~ s/\[\.-/[-/; # [.- ==> [-
$path =~ s/\.[^\]\.]+\.-\./\./g; # .foo.-. ==> .
$path =~ s/\[[^\]\.]+\.-\./\[/g; # [foo.-. ==> [
$path =~ s/\.[^\]\.]+\.-\]/\]/g; # .foo.-] ==> ]
$path =~ s/\[[^\]\.]+\.-\]/\[000000\]/g;# [foo.-] ==> [000000]
$path =~ s/\[\]// unless $path eq '[]'; # [] ==>
return $path;
}
}
=item catdir (override)
Concatenates a list of file specifications, and returns the result as a
VMS-syntax directory specification. No check is made for "impossible"
cases (e.g. elements other than the first being absolute filespecs).
=cut
sub catdir {
my $self = shift;
my $dir = pop;
my @dirs = grep {defined() && length()}, @_ ;
my $rslt;
if (@dirs) {
my $path = ((nelems @dirs) == 1) ?? @dirs[0] !! $self->catdir(< @dirs);
my @($spath,$sdir) = @($path,$dir);
$spath =~ s/\.dir\Z(?!\n)//; $sdir =~ s/\.dir\Z(?!\n)//;
$sdir = $self->eliminate_macros($sdir) unless $sdir =~ m/^[\w\-]+\Z(?!\n)/s;
$rslt = $self->fixpath($self->eliminate_macros($spath)."/$sdir",1);
# Special case for VMS absolute directory specs: these will have had device
# prepended during trip through Unix syntax in eliminate_macros(), since
# Unix syntax has no way to express "absolute from the top of this device's
# directory tree".
if ($spath =~ m/^[\[<][^.\-]/s) { $rslt =~ s/^[^\[<]+//s; }
}
else {
if (not defined $dir or not length $dir) { $rslt = ''; }
elsif ($dir =~ m/^\$\([^\)]+\)\Z(?!\n)/s) { $rslt = $dir; }
else { $rslt = vmspath($dir); }
}
return $self->canonpath($rslt);
}
=item catfile (override)
Concatenates a list of file specifications, and returns the result as a
VMS-syntax file specification.
=cut
sub catfile {
my $self = shift;
my $file = $self->canonpath(pop());
my @files = @(< grep {defined() && length()}, @_);
my $rslt;
if (@files) {
my $path = ((nelems @files) == 1) ?? @files[0] !! $self->catdir(<@files);
my $spath = $path;
$spath =~ s/\.dir\Z(?!\n)//;
if ($spath =~ m/^[^\)\]\/:>]+\)\Z(?!\n)/s && basename($file) eq $file) {
$rslt = "$spath$file";
}
else {
$rslt = $self->eliminate_macros($spath);
$rslt = vmsify($rslt.((defined $rslt) && ($rslt ne '') ?? '/' !! '').unixify($file));
}
}
else { $rslt = (defined($file) && length($file)) ?? vmsify($file) !! ''; }
return $self->canonpath($rslt);
}
=item curdir (override)
Returns a string representation of the current directory: '[]'
=cut
sub curdir {
return '[]';
}
=item devnull (override)
Returns a string representation of the null device: '_NLA0:'
=cut
sub devnull {
return "_NLA0:";
}
=item rootdir (override)
Returns a string representation of the root directory: 'SYS$DISK:[000000]'
=cut
sub rootdir {
return 'SYS$DISK:[000000]';
}
=item tmpdir (override)
Returns a string representation of the first writable directory
from the following list or '' if none are writable:
sys$scratch:
%ENV{TMPDIR}
Since perl 5.8.0, if running under taint mode, and if %ENV{TMPDIR}
is tainted, it is not used.
=cut
my $tmpdir;
sub tmpdir {
return $tmpdir if defined $tmpdir;
$tmpdir = @_[0]->_tmpdir( 'sys$scratch:', env::var('TMPDIR') );
}
=item updir (override)
Returns a string representation of the parent directory: '[-]'
=cut
sub updir {
return '[-]';
}
=item case_tolerant (override)
VMS file specification syntax is case-tolerant.
=cut
sub case_tolerant {
return 1;
}
=item path (override)
Translate logical name DCL$PATH as a searchlist, rather than trying
to C<split> string value of C<%ENV{'PATH'}>.
=cut
sub path {
my (@dirs,$dir,$i);
while ($dir = env::var('DCL$PATH;' . $i++)) { push(@dirs,$dir); }
return < @dirs;
}
=item file_name_is_absolute (override)
Checks for VMS directory spec as well as Unix separators.
=cut
sub file_name_is_absolute {
my @($self,$file) = @_;
# If it's a logical name, expand it.
$file = env::var($file) while $file =~ m/^[\w\$\-]+\Z(?!\n)/s && env::var($file);
return scalar($file =~ m!^/!s ||
$file =~ m![<\[][^.\-\]>]! ||
$file =~ m/:[^<\[]/);
}
=item splitpath (override)
Splits using VMS syntax.
=cut
sub splitpath {
my @($self,$path) = @_;
my @($dev,$dir,$file) = @('','','');
vmsify($path) =~ m/(.+:)?([\[<].*[\]>])?(.*)/s;
return @($1 || '',$2 || '',$3);
}
=item splitdir (override)
Split dirspec using VMS syntax.
=cut
sub splitdir {
my @($self,$dirspec) = @_;
my @dirs = @();
return @dirs if ( (!defined $dirspec) || ('' eq $dirspec) );
$dirspec =~ s/</[/g;
$dirspec =~ s/>/]/g; # < and > ==> [ and ]
$dirspec =~ s/\]\[\./\.\]\[/g; # ][. ==> .][
$dirspec =~ s/\[000000\.\]\[/\[/g; # [000000.][ ==> [
$dirspec =~ s/\[000000\./\[/g; # [000000. ==> [
$dirspec =~ s/\.\]\[000000\]/\]/g; # .][000000] ==> ]
$dirspec =~ s/\.\]\[/\./g; # foo.][bar ==> foo.bar
while ($dirspec =~ s/(^|[\[\<\.])\-(\-+)($|[\]\>\.])/$1-.$2$3/g) {}
# That loop does the following
# with any amount of dashes:
# .--. ==> .-.-.
# [--. ==> [-.-.
# .--] ==> .-.-]
# [--] ==> [-.-]
$dirspec = "[$dirspec]" unless $dirspec =~ m/[\[<]/; # make legal
$dirspec =~ s/^(\[|<)\./$1/;
@dirs = @( split m/(?<!\^)\./, vmspath($dirspec) );
@dirs[0] =~ s/^[\[<]//s; @dirs[-1] =~ s/[\]>]\Z(?!\n)//s;
< @dirs;
}
=item catpath (override)
Construct a complete filespec using VMS syntax
=cut
sub catpath {
my @($self,$dev,$dir,$file) = @_;
# We look for a volume in $dev, then in $dir, but not both
my @($dir_volume, $dir_dir, $dir_file) = $self->splitpath($dir);
$dev = $dir_volume unless length $dev;
$dir = length $dir_file ?? $self->catfile($dir_dir, $dir_file) !! $dir_dir;
if ($dev =~ m|^/+([^/]+)|) { $dev = "$1:"; }
else { $dev .= ':' unless $dev eq '' or $dev =~ m/:\Z(?!\n)/; }
if (length($dev) or length($dir)) {
$dir = "[$dir]" unless $dir =~ m/[\[<\/]/;
$dir = vmspath($dir);
}
"$dev$dir$file";
}
=item abs2rel (override)
Use VMS syntax when converting filespecs.
=cut
sub abs2rel {
my $self = shift;
return vmspath(File::Spec::Unix::abs2rel( $self, < @_ ))
if grep { m{/} }, @_;
my @($path,$base) = @_;
$base = $self->_cwd() unless defined $base and length $base;
for (@(\$path, \$base)) { $$_ = $self->canonpath($$_) }
# Are we even starting $path on the same (node::)device as $base? Note that
# logical paths or nodename differences may be on the "same device"
# but the comparison that ignores device differences so as to concatenate
# [---] up directory specs is not even a good idea in cases where there is
# a logical path difference between $path and $base nodename and/or device.
# Hence we fall back to returning the absolute $path spec
# if there is a case blind device (or node) difference of any sort
# and we do not even try to call $parse() or consult %ENV for $trnlnm()
# (this module needs to run on non VMS platforms after all).
my @($path_volume, $path_directories, $path_file) = $self->splitpath($path);
my @($base_volume, $base_directories, $base_file) = $self->splitpath($base);
return $path unless lc($path_volume) eq lc($base_volume);
$path = $self->rel2abs($path);
$base = $self->rel2abs($base);
# Now, remove all leading components that are the same
my @pathchunks = $self->splitdir( $path_directories );
my $pathchunks = @pathchunks;
unshift(@pathchunks,'000000') unless @pathchunks[0] eq '000000';
my @basechunks = $self->splitdir( $base_directories );
my $basechunks = @basechunks;
unshift(@basechunks,'000000') unless @basechunks[0] eq '000000';
while ( @pathchunks &&
@basechunks &&
lc( @pathchunks[0] ) eq lc( @basechunks[0] )
) {
shift @pathchunks ;
shift @basechunks ;
}
# @basechunks now contains the directories to climb out of,
# @pathchunks now has the directories to descend in to.
if ((@basechunks +> 0) || ($basechunks != $pathchunks)) {
$path_directories = join '.', ('-' x @basechunks, @pathchunks) ;
}
else {
$path_directories = join '.', @pathchunks;
}
$path_directories = '['.$path_directories.']';
return $self->canonpath( $self->catpath( '', $path_directories, $path_file ) ) ;
}
=item rel2abs (override)
Use VMS syntax when converting filespecs.
=cut
sub rel2abs {
my $self = shift ;
my @($path,$base ) = @_;
return undef unless defined $path;
if ($path =~ m/\//) {
$path = ( -d $path || $path =~ m/\/\z/ # educated guessing about
?? vmspath($path) # whether it's a directory
!! vmsify($path) );
}
$base = vmspath($base) if defined $base && $base =~ m/\//;
# Clean up and split up $path
if ( ! $self->file_name_is_absolute( $path ) ) {
# Figure out the effective $base and clean it up.
if ( !defined( $base ) || $base eq '' ) {
$base = $self->_cwd;
}
elsif ( ! $self->file_name_is_absolute( $base ) ) {
$base = $self->rel2abs( $base ) ;
}
else {
$base = $self->canonpath( $base ) ;
}
# Split up paths
my @( $path_directories, $path_file ) =
($self->splitpath( $path ))[[1..2]] ;
my @( $base_volume, $base_directories ) =
$self->splitpath( $base ) ;
$path_directories = '' if $path_directories eq '[]' ||
$path_directories eq '<>';
my $sep = '' ;
$sep = '.'
if ( $base_directories =~ m{[^.\]>]\Z(?!\n)} &&
$path_directories =~ m{^[^.\[<]}s
) ;
$base_directories = "$base_directories$sep$path_directories";
$base_directories =~ s{\.?[\]>][\[<]\.?}{.};
$path = $self->catpath( $base_volume, $base_directories, $path_file );
}
return $self->canonpath( $path ) ;
}
# eliminate_macros() and fixpath() are MakeMaker-specific methods
# which are used inside catfile() and catdir(). MakeMaker has its own
# copies as of 6.06_03 which are the canonical ones. We leave these
# here, in peace, so that File::Spec continues to work with MakeMakers
# prior to 6.06_03.
#
# Please consider these two methods deprecated. Do not patch them,
# patch the ones in ExtUtils::MM_VMS instead.
sub eliminate_macros {
my @($self,$path) = @_;
return '' unless (defined $path) && ($path ne '');
$self = \%() unless ref $self;
if ($path =~ m/\s/) {
return join ' ', map { $self->eliminate_macros($_) }, split m/\s+/, $path;
}
my $npath = unixify($path);
my $complex = 0;
my($head,$macro,$tail);
# perform m##g in scalar context so it acts as an iterator
while ($npath =~ m#(.*?)\$\((\S+?)\)(.*)#gs) {
if ($self->{$2}) {
@($head,$macro,$tail) = @($1,$2,$3);
if (ref $self->{$macro}) {
if (ref $self->{$macro} eq 'ARRAY') {
$macro = join ' ', <@{$self->{$macro}};
}
else {
print "Note: can't expand macro \$($macro) containing ",ref($self->{$macro}),
"\n\t(using MMK-specific deferred substitutuon; MMS will break)\n";
$macro = "\cB$macro\cB";
$complex = 1;
}
}
else { ($macro = unixify($self->{$macro})) =~ s#/\Z(?!\n)##; }
$npath = "$head$macro$tail";
}
}
if ($complex) { $npath =~ s#\cB(.*?)\cB#\$$1#gs; }
$npath;
}
# Deprecated. See the note above for eliminate_macros().
sub fixpath {
my @($self,$path,$force_path) = @_;
return '' unless $path;
$self = bless \%() unless ref $self;
my($fixedpath,$prefix,$name);
if ($path =~ m/\s/) {
return join ' ',
map { $self->fixpath($_,$force_path) },
split m/\s+/, $path;
}
if ($path =~ m#^\$\([^\)]+\)\Z(?!\n)#s || $path =~ m#[/:>\]]#) {
if ($force_path or $path =~ m/(?:DIR\)|\])\Z(?!\n)/) {
$fixedpath = vmspath($self->eliminate_macros($path));
}
else {
$fixedpath = vmsify($self->eliminate_macros($path));
}
}
elsif ((@($prefix,$name) = @($path =~ m#^\$\(([^\)]+)\)(.+)#s)) && $self->{$prefix}) {
my($vmspre) = $self->eliminate_macros("\$($prefix)");
# is it a dir or just a name?
$vmspre = ($vmspre =~ m|/| or $prefix =~ m/DIR\Z(?!\n)/) ?? vmspath($vmspre) !! '';
$fixedpath = ($vmspre ?? $vmspre !! $self->{$prefix}) . $name;
$fixedpath = vmspath($fixedpath) if $force_path;
}
else {
$fixedpath = $path;
$fixedpath = vmspath($fixedpath) if $force_path;
}
# No hints, so we try to guess
if (!defined($force_path) and $fixedpath !~ m/[:>(.\]]/) {
$fixedpath = vmspath($fixedpath) if -d $fixedpath;
}
# Trim off root dirname if it's had other dirs inserted in front of it.
$fixedpath =~ s/\.000000([\]>])/$1/;
# Special case for VMS absolute directory specs: these will have had device
# prepended during trip through Unix syntax in eliminate_macros(), since
# Unix syntax has no way to express "absolute from the top of this device's
# directory tree".
if ($path =~ m/^[\[>][^.\-]/) { $fixedpath =~ s/^[^\[<]+//; }
$fixedpath;
}
=back
=head1 COPYRIGHT
Copyright (c) 2004 by the Perl 5 Porters. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.
=head1 SEE ALSO
See L<File::Spec> and L<File::Spec::Unix>. This package overrides the
implementation of these methods, not the semantics.
An explanation of VMS file specs can be found at
L<"http://h71000.www7.hp.com/doc/731FINAL/4506/4506pro_014.html#apps_locating_naming_files">.
=cut
1;