View on
MetaCPAN is shutting down
For details read Perl NOC. After June 25th this page will redirect to
Adam Thomason > Log-Syslog-Fast-0.65 > Log::Syslog::Fast



Annotate this POD


New  2
Open  0
Stalled  1
View/Report Bugs
Module Version: 0.65   Source  


Log::Syslog::Fast - Perl extension for sending syslog messages over TCP, UDP, or UNIX sockets with minimal CPU overhead.


  use Log::Syslog::Fast ':all';
  my $logger = Log::Syslog::Fast->new(LOG_UDP, "", 514, LOG_LOCAL0, LOG_INFO, "mymachine", "logger");
  $logger->send("log message", time);


This module sends syslog messages over a network socket. It works like Sys::Syslog in setlogsock's 'udp', 'tcp', or 'unix' modes, but without the significant CPU overhead of that module when used for high-volume logging. Use of this specialized module is only recommended if 1) you must use network syslog as a messaging transport but 2) need to minimize the time spent in the logger.

This module supercedes the less general Log::Syslog::UDP.


Log::Syslog::Fast->new($proto, $hostname, $port, $facility, $severity, $sender, $name);

Create a new Log::Syslog::Fast object with the following parameters:


The transport protocol: one of LOG_TCP, LOG_UDP, or LOG_UNIX.

If LOG_TCP or LOG_UNIX is used, calls to $logger->send() will block until remote receipt of the message is confirmed. If LOG_UDP is used, the call will never block and may fail if insufficient buffer space exists in the network stack (in which case an exception will be thrown).

With LOG_UNIX, ->new will first attempt to connect with a SOCK_STREAM socket, and then try a SOCK_DGRAM if that is what the server expects (e.g. rsyslog).


For LOG_TCP and LOG_UDP, the destination hostname where a syslogd is running. For LOG_UNIX, the path to the UNIX socket where syslogd is listening (typically /dev/log).


For LOG_TCP and LOG_UDP, the destination port where a syslogd is listening, usually 514. Unused for LOG_UNIX, but should not be undefined or a warning will be emitted under strict.


The syslog facility constant, eg 16 for 'local0'. See RFC3164 section 4.1.1 (or <sys/syslog.h>) for appropriate constant values. See EXPORTS below for making these available by name.

The priority value is computed from the facility and severity per the RFC.


The syslog severity constant, eg 6 for 'info'. See RFC3164 section 4.1.1 (or <sys/syslog.h>) for appropriate constant values. See EXPORTS below for making these available by name.


The originating hostname. Sys::Hostname::hostname is typically a reasonable source for this.


The program name or tag to use for the message.

$logger->send($logmsg, [$time])
$logger->emit($logmsg, [$time])

Send a syslog message through the configured logger. If $time is not provided, time(2) will be called for you. That doubles the syscalls per message, so try to pass it if you're already calling time() yourself.

->send may throw an exception if the system call fails (e.g. the transport becomes disconnected for connected protocols, or the kernel buffer is full for unconnected). For this reason it is usually wise to wrap calls with an exception handler. Likewise, calling ->send from a $SIG{__DIE__} handler is unwise.

emit is an alias for send.


Note that send does not add any newline character(s) to its input. You will certainly want to do this yourself for TCP connections, or the server will not treat each message as a separate line. However with UDP the server should accept a message without a trailing newline (though some implementations may have difficulty with that).

$logger->set_receiver($proto, $hostname, $port)

Change the protocol, destination host, and port. This will force a reconnection in LOG_TCP or LOG_UNIX mode.

$logger->set_priority($facility, $severity)

Change both the syslog facility and severity.


Change only the syslog facility.


Change only the syslog severity.


Change what is sent as the hostname of the sender.


Change what is sent as the name of the sending program.


Change what is sent as the process id of the sending program.


Change the message format. This should be either the constant LOG_RFC3164 (the default) or LOG_RFC5424.


Returns the current priority value.


Returns the current facility value.


Returns the current severity value.


Returns the current message format.


If the remote syslogd is unreachable, certain methods may throw an exception or raise a signal:


Use Log::Syslog::Constants to export priority constants, e.g. LOG_INFO.





LOG_UNIX with SOCK_DGRAM has not been well tested.


Adam Thomason, <>


Copyright (C) 2009-2011 by Say Media, Inc.

This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.5 or, at your option, any later version of Perl 5 you may have available.

syntax highlighting: