David Golden >
Test-Number-Delta-1.03 >
Test::Number::Delta

Module Version: 1.03
Test::Number::Delta - Compare the difference between numbers against a given tolerance

# Import test functions use Test::Number::Delta; # Equality test with default tolerance delta_ok( 1e-5, 2e-5, 'values within 1e-6'); # Inequality test with default tolerance delta_not_ok( 1e-5, 2e-5, 'values not within 1e-6'); # Provide specific tolerance delta_within( 1e-3, 2e-3, 1e-4, 'values within 1e-4'); delta_not_within( 1e-3, 2e-3, 1e-4, 'values not within 1e-4'); # Compare arrays or matrices @a = ( 3.14, 1.41 ); @b = ( 3.15, 1.41 ); delta_ok( \@a, \@b, 'compare @a and @b' ); # Set a different default tolerance use Test::Number::Delta within => 1e-5; delta_ok( 1.1e-5, 2e-5, 'values within 1e-5'); # ok # Set a relative tolerance use Test::Number::Delta relative => 1e-3; delta_ok( 1.01, 1.0099, 'values within 1.01e-3');

At some point or another, most programmers find they need to compare floating-point numbers for equality. The typical idiom is to test if the absolute value of the difference of the numbers is within a desired tolerance, usually called epsilon. This module provides such a function for use with Test::Harness. Usage is similar to other test functions described in Test::More. Semantically, the `delta_within`

function replaces this kind of construct:

ok ( abs($p - $q) < $epsilon, '$p is equal to $q' ) or diag "$p is not equal to $q to within $epsilon";

While there's nothing wrong with that construct, it's painful to type it repeatedly in a test script. This module does the same thing with a single function call. The `delta_ok`

function is similar, but either uses a global default value for epsilon or else calculates a 'relative' epsilon on the fly so that epsilon is scaled automatically to the size of the arguments to `delta_ok`

. Both functions are exported automatically.

Because checking floating-point equality is not always reliable, it is not possible to check the 'equal to' boundary of 'less than or equal to epsilon'. Therefore, Test::Number::Delta only compares if the absolute value of the difference is **less than** epsilon (for equality tests) or **greater than** epsilon (for inequality tests).

With no arguments, epsilon defaults to 1e-6. (An arbitrary choice on the author's part.)

To specify a different default value for epsilon, provide a `within`

parameter when importing the module. The value must be non-zero.

As an alternative to using a fixed value for epsilon, provide a `relative`

parameter when importing the module. This signals that `delta_ok`

should test equality with an epsilon that is scaled to the size of the arguments. Epsilon is calculated as the relative value times the absolute value of the argument with the greatest magnitude. Mathematically, for arguments 'x' and 'y':

epsilon = relative * max( abs(x), abs(y) )

For example, a relative value of "0.01" would mean that the arguments are equal if they differ by less than 1% of the larger of the two values. A relative value of 1e-6 means that the arguments must differ by less than 1 millionth of the larger value. The relative value must be non-zero.

use Test::Number::Delta 'no_plan'; # or use Test::Number::Delta within => 1e-9, tests => 1;

If a test plan has not already been specified, the optional parameter for Test::Number::Delta may be followed with a test plan (see Test::More for details). If a parameter for Test::Number::Delta is given, it must come first.

delta_within( $p, $q, $epsilon, '$p and $q are equal within $epsilon' ); delta_within( \@p, \@q, $epsilon, '@p and @q are equal within $epsilon' );

This function tests for equality within a given value of epsilon. The test is true if the absolute value of the difference between $p and $q is **less than** epsilon. If the test is true, it prints an "OK" statement for use in testing. If the test is not true, this function prints a failure report and diagnostic. Epsilon must be non-zero.

The values to compare may be scalars or references to arrays. If the values are references to arrays, the comparison is done pairwise for each index value of the array. The pairwise comparison is recursive, so matrices may be compared as well.

For example, this code sample compares two matrices:

my @a = ( [ 3.14, 6.28 ], [ 1.41, 2.84 ] ); my @b = ( [ 3.14, 6.28 ], [ 1.42, 2.84 ] ); delta_within( \@a, \@b, 1e-6, 'compare @a and @b' );

The sample prints the following:

not ok 1 - compare @a and @b # At [1][0]: 1.4100000 and 1.4200000 are not equal to within 0.000001

delta_ok( $p, $q, '$p and $q are close enough to equal' ); delta_ok( \@p, \@q, '@p and @q are close enough to equal' );

This function tests for equality within a default epsilon value. See "USAGE" for details on changing the default. Otherwise, this function works the same as `delta_within`

.

delta_not_within( $p, $q, '$p and $q are different' ); delta_not_within( \@p, \@q, $epsilon, '@p and @q are different' );

This test compares inequality in excess of a given value of epsilon. The test is true if the absolute value of the difference between $p and $q is **greater than** epsilon. For array or matrix comparisons, the test is true if *any* pair of values differs by more than epsilon. Otherwise, this function works the same as `delta_within`

.

delta_not_ok( $p, $q, '$p and $q are different' ); delta_not_ok( \@p, \@q, '@p and @q are different' );

This function tests for inequality in excess of a default epsilon value. See "USAGE" for details on changing the default. Otherwise, this function works the same as `delta_not_within`

.

Test::More, Test::Harness, Test::Builder

Please report any bugs or feature using the CPAN Request Tracker. Bugs can be submitted by email to `bug-Test-Number-Delta@rt.cpan.org`

or through the web interface at http://rt.cpan.org/Dist/Display.html?Queue=Test-Number-Delta

When submitting a bug or request, please include a test-file or a patch to an existing test-file that illustrates the bug or desired feature.

David A Golden (DAGOLDEN)

dagolden@cpan.org

Copyright (c) 2005, 2006 by David A. Golden

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

The full text of the license can be found in the LICENSE file included with this module.

BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

syntax highlighting: