Math::Prime::Util - Utilities related to prime numbers, including fast sieves and factoring
Version 0.37
# Normally you would just import the functions you are using. # Nothing is exported by default. List the functions, or use :all. use Math::Prime::Util ':all'; # Get a big array reference of many primes my $aref = primes( 100_000_000 ); # All the primes between 5k and 10k inclusive my $aref = primes( 5_000, 10_000 ); # If you want them in an array instead my @primes = @{primes( 500 )}; # You can do something for every prime in a range. Twin primes to 10k: forprimes { say if is_prime($_+2) } 10000; # Or for the composites in a range forcomposites { say if is_strong_pseudoprime($_,2) } 10000, 10**6; # For non-bigints, is_prime and is_prob_prime will always be 0 or 2. # They return 0 (composite), 2 (prime), or 1 (probably prime) say "$n is prime" if is_prime($n); say "$n is ", (qw(composite maybe_prime? prime))[is_prob_prime($n)]; # Strong pseudoprime test with multiple bases, using Miller-Rabin say "$n is a prime or 2/7/61-psp" if is_strong_pseudoprime($n, 2, 7, 61); # Standard and strong Lucas-Selfridge, and extra strong Lucas tests say "$n is a prime or lpsp" if is_lucas_pseudoprime($n); say "$n is a prime or slpsp" if is_strong_lucas_pseudoprime($n); say "$n is a prime or eslpsp" if is_extra_strong_lucas_pseudoprime($n); # step to the next prime (returns 0 if not using bigints and we'd overflow) $n = next_prime($n); # step back (returns 0 if given input less than 2) $n = prev_prime($n); # Return Pi(n) -- the number of primes E<lt>= n. $primepi = prime_count( 1_000_000 ); $primepi = prime_count( 10**14, 10**14+1000 ); # also does ranges # Quickly return an approximation to Pi(n) my $approx_number_of_primes = prime_count_approx( 10**17 ); # Lower and upper bounds. lower <= Pi(n) <= upper for all n die unless prime_count_lower($n) <= prime_count($n); die unless prime_count_upper($n) >= prime_count($n); # Return p_n, the nth prime say "The ten thousandth prime is ", nth_prime(10_000); # Return a quick approximation to the nth prime say "The one trillionth prime is ~ ", nth_prime_approx(10**12); # Lower and upper bounds. lower <= nth_prime(n) <= upper for all n die unless nth_prime_lower($n) <= nth_prime($n); die unless nth_prime_upper($n) >= nth_prime($n); # Get the prime factors of a number @prime_factors = factor( $n ); # Return ([p1,e1],[p2,e2], ...) for $n = p1^e1 * p2*e2 * ... @pe = factor_exp( $n ); # Get all divisors other than 1 and n @divisors = divisors( $n ); # Or just apply a block for each one fordivisors { $sum += $_ + $_*$_ } $n; # Euler phi (Euler's totient) on a large number use bigint; say euler_phi( 801294088771394680000412 ); say jordan_totient(5, 1234); # Jordan's totient # Moebius function used to calculate Mertens $sum += moebius($_) for (1..200); say "Mertens(200) = $sum"; # Mertens function directly (more efficient for large values) say mertens(10_000_000); # Exponential of Mangoldt function say "lamba(49) = ", log(exp_mangoldt(49)); # Some more number theoretical functions say liouville(4292384); say chebyshev_psi(234984); say chebyshev_theta(92384234); say partitions(1000); # divisor sum $sigma = divisor_sum( $n ); # sum of divisors $sigma0 = divisor_sum( $n, 0 ); # count of divisors $sigmak = divisor_sum( $n, $k ); $sigmaf = divisor_sum( $n, sub { log($_[0]) } ); # arbitrary func # primorial n#, primorial p(n)#, and lcm say "The product of primes below 47 is ", primorial(47); say "The product of the first 47 primes is ", pn_primorial(47); say "lcm(1..1000) is ", consecutive_integer_lcm(1000); # Ei, li, and Riemann R functions my $ei = ExponentialIntegral($x); # $x a real: $x != 0 my $li = LogarithmicIntegral($x); # $x a real: $x >= 0 my $R = RiemannR($x) # $x a real: $x > 0 my $Zeta = RiemannZeta($x) # $x a real: $x >= 0 # Precalculate a sieve, possibly speeding up later work. prime_precalc( 1_000_000_000 ); # Free any memory used by the module. prime_memfree; # Alternate way to free. When this leaves scope, memory is freed. my $mf = Math::Prime::Util::MemFree->new; # Random primes my $small_prime = random_prime(1000); # random prime <= limit my $rand_prime = random_prime(100, 10000); # random prime within a range my $rand_prime = random_ndigit_prime(6); # random 6-digit prime my $rand_prime = random_nbit_prime(128); # random 128-bit prime my $rand_prime = random_strong_prime(256); # random 256-bit strong prime my $rand_prime = random_maurer_prime(256); # random 256-bit provable prime
A set of utilities related to prime numbers. These include multiple sieving methods, is_prime, prime_count, nth_prime, approximations and bounds for the prime_count and nth prime, next_prime and prev_prime, factoring utilities, and more.
The default sieving and factoring are intended to be (and currently are) the fastest on CPAN, including Math::Prime::XS, Math::Prime::FastSieve, Math::Factor::XS, Math::Prime::TiedArray, Math::Big::Factors, Math::Factoring, and Math::Primality (when the GMP module is available). For numbers in the 10-20 digit range, it is often orders of magnitude faster. Typically it is faster than Math::Pari for 64-bit operations.
All operations support both Perl UV's (32-bit or 64-bit) and bignums. If you want high performance with big numbers (larger than Perl's native 32-bit or 64-bit size), you should install Math::Prime::Util::GMP and Math::BigInt::GMP. This will be a recurring theme throughout this documentation -- while all bignum operations are supported in pure Perl, most methods will be much slower than the C+GMP alternative.
The module is thread-safe and allows concurrency between Perl threads while still sharing a prime cache. It is not itself multi-threaded. See the Limitations section if you are using Win32 and threads in your program.
Two scripts are also included and installed by default:
--help
to see all the options.factor
program. It supports bigint and expression inputs.By default all functions support bignums. For performance, you should install and use Math::BigInt::GMP or Math::BigInt::Pari, and Math::Prime::Util::GMP.
If you are using bigints, here are some performance suggestions:
use bigint try => 'GMP,Pari'
in your script, or on the command line -Mbigint=lib,GMP
. Large modular exponentiation is much faster using the GMP or Pari backends, as are the math and approximation functions when called with very large inputs.This module provides three functions for general primality testing, as well as numerous specialized functions. The three main functions are: "is_prob_prime" and "is_prime" for general use, and "is_provable_prime" for proofs. For inputs below 2^64
the functions are identical and fast deterministic testing is performed. That is, the results will always be correct and should take at most a few microseconds for any input. This is hundreds to thousands of times faster than other CPAN modules. For inputs larger than 2^64
, an extra-strong BPSW test is used. See the "PRIMALITY TESTING NOTES" section for more discussion.
print "$n is prime" if is_prime($n);
Returns 0 is the number is composite, 1 if it is probably prime, and 2 if it is definitely prime. For numbers smaller than 2^64
it will only return 0 (composite) or 2 (definitely prime), as this range has been exhaustively tested and has no counterexamples. For larger numbers, an extra-strong BPSW test is used. If Math::Prime::Util::GMP is installed, some additional primality tests are also performed, and a quick attempt is made to perform a primality proof, so it will return 2 for many other inputs.
Also see the "is_prob_prime" function, which will never do additional tests, and the "is_provable_prime" function which will construct a proof that the input is number prime and returns 2 for almost all primes (at the expense of speed).
For native precision numbers (anything smaller than 2^64
, all three functions are identical and use a deterministic set of tests (selected Miller-Rabin bases or BPSW). For larger inputs both "is_prob_prime" and "is_prime" return probable prime results using the extra-strong Baillie-PSW test, which has had no counterexample found since it was published in 1980.
For cryptographic key generation, you may want even more testing for probable primes (NIST recommends some additional M-R tests). This can be done using a different test (e.g. "is_frobenius_underwood_pseudoprime") or using additional M-R tests with random bases with "miller_rabin_random". Even better, make sure Math::Prime::Util::GMP is installed and use "is_provable_prime" which should be reasonably fast for sizes under 2048 bits. Another possibility is to use "random_maurer_prime" in Math::Prime::Util which constructs a random provable prime.
Returns all the primes between the lower and upper limits (inclusive), with a lower limit of 2
if none is given.
An array reference is returned (with large lists this is much faster and uses less memory than returning an array directly).
my $aref1 = primes( 1_000_000 ); my $aref2 = primes( 1_000_000_000_000, 1_000_000_001_000 ); my @primes = @{ primes( 500 ) }; print "$_\n" for @{primes(20,100)};
Sieving will be done if required. The algorithm used will depend on the range and whether a sieve result already exists. Possibilities include primality testing (for very small ranges), a Sieve of Eratosthenes using wheel factorization, or a segmented sieve.
$n = next_prime($n);
Returns the next prime greater than the input number. The result will be a bigint if it can not be exactly represented in the native int type (larger than 4,294,967,291
in 32-bit Perl; larger than 18,446,744,073,709,551,557
in 64-bit).
$n = prev_prime($n);
Returns the prime preceding the input number (i.e. the largest prime that is strictly less than the input). 0 is returned if the input is 2
or lower.
forprimes { say } 100,200; # print primes from 100 to 200 $sum=0; forprimes { $sum += $_ } 100000; # sum primes to 100k forprimes { say if is_prime($_+2) } 10000; # print twin primes to 10k
Given a block and either an end count or a start and end pair, calls the block for each prime in the range. Compared to getting a big array of primes and iterating through it, this is more memory efficient and perhaps more convenient. This will almost always be the fastest way to loop over a range of primes. Nesting and use in threads are allowed.
Math::BigInt objects may be used for the range.
For some uses an iterator ("prime_iterator", "prime_iterator_object") or a tied array (Math::Prime::Util::PrimeArray) may be more convenient. Objects can be passed to functions, and allow early loop exits.
forcomposites { say } 1000; forcomposites { say } 2000,2020;
Given a block and either an end number or a start and end pair, calls the block for each composite in the inclusive range. The composites are the numbers greater than 1 which are not prime: 4, 6, 8, 9, 10, 12, 14, 15, ...
fordivisors { $prod *= $_ } $n;
Given a block and a non-negative number n
, the block is called with $_
set to each divisor in sorted order. Also see "divisor_sum".
my $it = prime_iterator; $sum += $it->() for 1..100000;
Returns a closure-style iterator. The start value defaults to the first prime (2) but an initial value may be given as an argument, which will result in the first value returned being the next prime greater than or equal to the argument. For example, this:
my $it = prime_iterator(200); say $it->(); say $it->();
will return 211 followed by 223, as those are the next primes >= 200. On each call, the iterator returns the current value and increments to the next prime.
Other options include "forprimes" (more efficiency, less flexibility), Math::Prime::Util::PrimeIterator (an iterator with more functionality), or Math::Prime::Util::PrimeArray (a tied array).
my $it = prime_iterator_object; while ($it->value < 100) { say $it->value; $it->next; } $sum += $it->iterate for 1..100000;
Returns a Math::Prime::Util::PrimeIterator object. A shortcut that loads the package if needed, calls new, and returns the object. See the documentation for that package for details. This object has more features than the simple one above (e.g. the iterator is bi-directional), and also handles iterating across bigints.
my $primepi = prime_count( 1_000 ); my $pirange = prime_count( 1_000, 10_000 );
Returns the Prime Count function Pi(n)
, also called primepi
in some math packages. When given two arguments, it returns the inclusive count of primes between the ranges. E.g. (13,17)
returns 2, (14,17)
and (13,16)
return 1, (14,16)
returns 0.
The current implementation decides based on the ranges whether to use a segmented sieve with a fast bit count, or the extended LMO algorithm. The former is preferred for small sizes as well as small ranges. The latter is much faster for large ranges.
The segmented sieve is very memory efficient and is quite fast even with large base values. Its complexity is approximately O(sqrt(a) + (b-a))
, where the first term is typically negligible below ~ 10^11
. Memory use is proportional only to sqrt(a)
, with total memory use under 1MB for any base under 10^14
.
The extended LMO method has complexity approximately O(b^(2/3)) + O(a^(2/3))
, and also uses low memory. A calculation of Pi(10^14)
completes in a few seconds, Pi(10^15)
in well under a minute, and Pi(10^16)
in about one minute. In contrast, even parallel primesieve would take over a week on a similar machine to determine Pi(10^16)
.
Also see the function "prime_count_approx" which gives a very good approximation to the prime count, and "prime_count_lower" and "prime_count_upper" which give tight bounds to the actual prime count. These functions return quickly for any input, including bigints.
my $lower_limit = prime_count_lower($n); my $upper_limit = prime_count_upper($n); # $lower_limit <= prime_count(n) <= $upper_limit
Returns an upper or lower bound on the number of primes below the input number. These are analytical routines, so will take a fixed amount of time and no memory. The actual prime_count
will always be equal to or between these numbers.
A common place these would be used is sizing an array to hold the first $n
primes. It may be desirable to use a bit more memory than is necessary, to avoid calling prime_count
.
These routines use verified tight limits below a range at least 2^35
, and use the Dusart (2010) bounds of
x/logx * (1 + 1/logx + 2.000/log^2x) <= Pi(x) x/logx * (1 + 1/logx + 2.334/log^2x) >= Pi(x)
above that range. These bounds do not assume the Riemann Hypothesis. If the configuration option assume_rh
has been set (it is off by default), then the Schoenfeld (1976) bounds are used for large values.
print "there are about ", prime_count_approx( 10 ** 18 ), " primes below one quintillion.\n";
Returns an approximation to the prime_count
function, without having to generate any primes. For values under 10^36
this uses the Riemann R function, which is quite accurate: an error of less than 0.0005%
is typical for input values over 2^32
, and decreases as the input gets larger. If Math::MPFR is installed, the Riemann R function is used for all values, and will be very fast. If not, then values of 10^36
and larger will use the approximation li(x) - li(sqrt(x))/2
. While not as accurate as the Riemann R function, it still should have error less than 0.00000000000000001%
.
A slightly faster but much less accurate answer can be obtained by averaging the upper and lower bounds.
say "The ten thousandth prime is ", nth_prime(10_000);
Returns the prime that lies in index n
in the array of prime numbers. Put another way, this returns the smallest p
such that Pi(p) >= n
.
For relatively small inputs (below 1 million or so), this does a sieve over a range containing the nth prime, then counts up to the number. This is fairly efficient in time and memory. For larger values, create a low-biased estimate using the inverse logarithmic integral, use a fast prime count, then sieve in the small difference.
While this method is thousands of times faster than generating primes, and doesn't involve big tables of precomputed values, it still can take a fair amount of time for large inputs. Calculating the 10^12th
prime takes about 1 second, the 10^13th
prime takes under 10 seconds, and the 10^14th
prime (3475385758524527) takes under one minute. Think about whether a bound or approximation would be acceptable, as they can be computed analytically.
If the result is larger than a native integer size (32-bit or 64-bit), the result will take a very long time. A later version of Math::Prime::Util::GMP may include this functionality which would help for 32-bit machines.
my $lower_limit = nth_prime_lower($n); my $upper_limit = nth_prime_upper($n); # $lower_limit <= nth_prime(n) <= $upper_limit
Returns an analytical upper or lower bound on the Nth prime. These are very fast as they do not need to sieve or search through primes or tables. An exact answer is returned for tiny values of n
. The lower limit uses the Dusart 2010 bound for all n
, while the upper bound uses one of the two Dusart 2010 bounds for n >= 178974
, a Dusart 1999 bound for n >= 39017
, and a simple bound of n * (logn + 0.6 * loglogn)
for small n
.
say "The one trillionth prime is ~ ", nth_prime_approx(10**12);
Returns an approximation to the nth_prime
function, without having to generate any primes. Uses the Cipolla 1902 approximation with two polynomials, plus a correction for small values to reduce the error.
Takes a positive number n
and a base a
as input, and returns 1 if n
is a probable prime to base a
. This is the simple Fermat primality test. Removing primes, given base 2 this produces the sequence OEIS A001567.
my $maybe_prime = is_strong_pseudoprime($n, 2); my $probably_prime = is_strong_pseudoprime($n, 2, 3, 5, 7, 11, 13, 17);
Takes a positive number as input and one or more bases. The bases must be greater than 1
. Returns 1 if the input is a strong probable prime to all of the bases, and 0 if not.
If 0 is returned, then the number really is a composite. If 1 is returned, then it is either a prime or a strong pseudoprime to all the given bases. Given enough distinct bases, the chances become very, very strong that the number is actually prime.
This is usually used in combination with other tests to make either stronger tests (e.g. the strong BPSW test) or deterministic results for numbers less than some verified limit (e.g. it has long been known that no more than three selected bases are required to give correct primality test results for any 32-bit number). Given the small chances of passing multiple bases, there are some math packages that just use multiple MR tests for primality testing.
Even inputs other than 2 will always return 0 (composite). While the algorithm does run with even input, most sources define it only on odd input. Returning composite for all non-2 even input makes the function match most other implementations including Math::Primality's is_strong_pseudoprime
function.
An alias for is_strong_pseudoprime
. This name is deprecated.
Takes a positive number as input, and returns 1 if the input is a standard Lucas probable prime using the Selfridge method of choosing D, P, and Q (some sources call this a Lucas-Selfridge pseudoprime). Removing primes, this produces the sequence OEIS A217120.
Takes a positive number as input, and returns 1 if the input is a strong Lucas probable prime using the Selfridge method of choosing D, P, and Q (some sources call this a strong Lucas-Selfridge pseudoprime). This is one half of the BPSW primality test (the Miller-Rabin strong pseudoprime test with base 2 being the other half). Removing primes, this produces the sequence OEIS A217255.
Takes a positive number as input, and returns 1 if the input passes the extra strong Lucas test (as defined in Grantham 2000). This test has more stringent conditions than the strong Lucas test, and produces about 60% fewer pseudoprimes. Performance is typically 20-30% faster than the strong Lucas test.
The parameters are selected using the Baillie-OEIS method method: increment P
from 3
until jacobi(D,n) = -1
. Removing primes, this produces the sequence OEIS A217719.
This is similar to the "is_extra_strong_lucas_pseudoprime" function, but does not calculate U
, so is a little faster, but also weaker. With the current implementations, there is little reason to prefer this unless trying to reproduce specific results. The extra-strong implementation has been optimized to use similar features, removing most of the performance advantage.
An optional second argument (an integer between 1 and 256) indicates the increment amount for P
parameter selection. The default value of 1 yields the parameter selection described in "is_extra_strong_lucas_pseudoprime", creating a pseudoprime sequence which is a superset of the latter's pseudoprime sequence OEIS A217719. A value of 2 yields the method used by Pari.
Because the U = 0
condition is ignored, this produces about 5% more pseudoprimes than the extra-strong Lucas test. However this is still only 66% of the number produced by the strong Lucas-Selfridge test. No BPSW counterexamples have been found with any of the Lucas tests described.
Takes a positive number as input, and returns 1 if the input passes the minimal lambda+2 test (see Underwood 2012 "Quadratic Compositeness Tests"), where (L+2)^(n-1) = 5 + 2x mod (n, L^2 - Lx + 1)
. The computational cost for this is between the cost of 2 and 3 strong pseudoprime tests. There are no known counterexamples, but this is not a well studied test.
Takes a positive number (n
) as input and a positive number (k
) of bases to use. Performs k
Miller-Rabin tests using uniform random bases between 2 and n-2
.
This should not be used in place of "is_prob_prime", "is_prime", or "is_provable_prime". Those functions will be faster and provide better results than running k
Miller-Rabin tests. This function can be used if one wants more assurances for non-proven primes, such as for cryptographic uses where the size is large enough that proven primes are not desired.
my $prob_prime = is_prob_prime($n); # Returns 0 (composite), 2 (prime), or 1 (probably prime)
Takes a positive number as input and returns back either 0 (composite), 2 (definitely prime), or 1 (probably prime).
For 64-bit input (native or bignum), this uses either a deterministic set of Miller-Rabin tests (1, 2, or 3 tests) or a strong BPSW test consisting of a single base-2 strong probable prime test followed by a strong Lucas test. This has been verified with Jan Feitsma's 2-PSP database to produce no false results for 64-bit inputs. Hence the result will always be 0 (composite) or 2 (prime).
For inputs larger than 2^64
, an extra-strong Baillie-PSW primality test is performed (also called BPSW or BSW). This is a probabilistic test, so only 0 (composite) and 1 (probably prime) are returned. There is a possibility that composites may be returned marked prime, but since the test was published in 1980, not a single BPSW pseudoprime has been found, so it is extremely likely to be prime. While we believe (Pomerance 1984) that an infinite number of counterexamples exist, there is a weak conjecture (Martin) that none exist under 10000 digits.
Given a positive number input, returns 0 (composite), 2 (definitely prime), or 1 (probably prime), using the BPSW primality test (extra-strong variant). Normally one of the "is_prime" in Math::Prime::Util or "is_prob_prime" in Math::Prime::Util functions will suffice, but those functions do pre-tests to find easy composites. If you know this is not necessary, then calling "is_bpsw_prime" may save a small amount of time.
say "$n is definitely prime" if is_provable_prime($n) == 2;
Takes a positive number as input and returns back either 0 (composite), 2 (definitely prime), or 1 (probably prime). This gives it the same return values as "is_prime" and "is_prob_prime". Note that numbers below 2^64 are considered proven by the deterministic set of Miller-Rabin bases or the BPSW test. Both of these have been tested for all small (64-bit) composites and do not return false positives.
Using the Math::Prime::Util::GMP module is highly recommended for doing primality proofs, as it is much, much faster. The pure Perl code is just not fast for this type of operation, nor does it have the best algorithms. It should suffice for proofs of up to 40 digit primes, while the latest MPU::GMP works for primes of hundreds of digits (thousands with an optional larger polynomial set).
The pure Perl implementation uses theorem 5 of BLS75 (Brillhart, Lehmer, and Selfridge's 1975 paper), an improvement on the Pocklington-Lehmer test. This requires n-1
to be factored to (n/2)^(1/3))
. This is often fast, but as n
gets larger, it takes exponentially longer to find factors.
Math::Prime::Util::GMP implements both the BLS75 theorem 5 test as well as ECPP (elliptic curve primality proving). It will typically try a quick n-1
proof before using ECPP. Certificates are available with either method. This results in proofs of 200-digit primes in under 1 second on average, and many hundreds of digits are possible. This makes it significantly faster than Pari 2.1.7's is_prime(n,1)
which is the default for Math::Pari.
my $cert = prime_certificate($n); say verify_prime($cert) ? "proven prime" : "not prime";
Given a positive integer n
as input, returns a primality certificate as a multi-line string. If we could not prove n
prime, an empty string is returned (n
may or may not be composite). This may be examined or given to "verify_prime" for verification. The latter function contains the description of the format.
Given a positive integer as input, returns a two element array containing the result of "is_provable_prime": 0 definitely composite 1 probably prime 2 definitely prime and a primality certificate like "prime_certificate". The certificate will be an empty string if the first element is not 2.
my $cert = prime_certificate($n); say verify_prime($cert) ? "proven prime" : "not prime";
Given a primality certificate, returns either 0 (not verified) or 1 (verified). Most computations are done using pure Perl with Math::BigInt, so you probably want to install and use Math::BigInt::GMP, and ECPP certificates will be faster with Math::Prime::Util::GMP for its elliptic curve computations.
If the certificate is malformed, the routine will carp a warning in addition to returning 0. If the verbose
option is set (see "prime_set_config") then if the validation fails, the reason for the failure is printed in addition to returning 0. If the verbose
option is set to 2 or higher, then a message indicating success and the certificate type is also printed.
A certificate may have arbitrary text before the beginning (the primality routines from this module will not have any extra text, but this way verbose output from the prover can be safely stored in a certificate). The certificate begins with the line:
[MPU - Primality Certificate]
All lines in the certificate beginning with #
are treated as comments and ignored, as are blank lines. A version number may follow, such as:
Version 1.0
For all inputs, base 10 is the default, but at any point this may be changed with a line like:
Base 16
where allowed bases are 10, 16, and 62. This module will only use base 10, so its routines will not output Base commands.
Next, we look for (using "100003" as an example):
Proof for: N 100003
where the text Proof for:
indicates we will read an N
value. Skipping comments and blank lines, the next line should be "N " followed by the number.
After this, we read one or more blocks. Each block is a proof of the form:
If Q is prime, then N is prime.
Some of the blocks have more than one Q value associated with them, but most only have one. Each block has its own set of conditions which must be verified, and this can be done completely self-contained. That is, each block is independent of the other blocks and may be processed in any order. To be a complete proof, each block must successfully verify. The block types and their conditions are shown below.
Finally, when all blocks have been read and verified, we must ensure we can construct a proof tree from the set of blocks. The root of the tree is the initial N
, and for each node (block), all Q
values must either have a block using that value as its N
or Q
must be less than 2^64
and pass BPSW.
Some other certificate formats (e.g. Primo) use an ordered chain, where the first block must be for the initial N
, a single Q
is given which is the implied N
for the next block, and so on. This simplifies validation implementation somewhat, and removes some redundant information from the certificate, but has no obvious way to add proof types such as Lucas or the various BLS75 theorems that use multiple factors. I decided that the most general solution was to have the certificate contain the set in any order, and let the verifier do the work of constructing the tree.
The blocks begin with the text "Type ..." where ... is the type. One or more values follow. The defined types are:
Small
Type Small N 5791
N must be less than 2^64 and be prime (use BPSW or deterministic M-R).
BLS3
Type BLS3 N 2297612322987260054928384863 Q 16501461106821092981 A 5
A simple n-1 style proof using BLS75 theorem 3. This block verifies if: a Q is odd b Q > 2 c Q divides N-1 . Let M = (N-1)/Q d MQ+1 = N e M > 0 f 2Q+1 > sqrt(N) g A^((N-1)/2) mod N = N-1 h A^(M/2) mod N != N-1
Pocklington
Type Pocklington N 2297612322987260054928384863 Q 16501461106821092981 A 5
A simple n-1 style proof using generalized Pocklington. This is more restrictive than BLS3 and much more than BLS5. This is Primo's type 1, and this module does not currently generate these blocks. This block verifies if: a Q divides N-1 . Let M = (N-1)/Q b M > 0 c M < Q d MQ+1 = N e A > 1 f A^(N-1) mod N = 1 g gcd(A^M - 1, N) = 1
BLS15
Type BLS15 N 8087094497428743437627091507362881 Q 175806402118016161687545467551367 LP 1 LQ 22
A simple n+1 style proof using BLS75 theorem 15. This block verifies if: a Q is odd b Q > 2 c Q divides N+1 . Let M = (N+1)/Q d MQ-1 = N e M > 0 f 2Q-1 > sqrt(N) . Let D = LP*LP - 4*LQ g D != 0 h Jacobi(D,N) = -1 . Note: V_{k} indicates the Lucas V sequence with LP,LQ i V_{m/2} mod N != 0 j V_{(N+1)/2} mod N == 0
BLS5
Type BLS5 N 8087094497428743437627091507362881 Q[1] 98277749 Q[2] 3631 A[0] 11 ----
A more sophisticated n-1 proof using BLS theorem 5. This requires N-1 to be factored only to (N/2)^(1/3)
. While this looks much more complicated, it really isn't much more work. The biggest drawback is just that we have multiple Q values to chain rather than a single one. This block verifies if:
a N > 2 b N is odd . Note: the block terminates on the first line starting with a C<->. . Let Q[0] = 2 . Let A[i] = 2 if Q[i] exists and A[i] does not c For each i (0 .. maxi): c1 Q[i] > 1 c2 Q[i] < N-1 c3 A[i] > 1 c4 A[i] < N c5 Q[i] divides N-1 . Let F = N-1 divided by each Q[i] as many times as evenly possible . Let R = (N-1)/F d F is even e gcd(F, R) = 1 . Let s = integer part of R / 2F . Let f = fractional part of R / 2F . Let P = (F+1) * (2*F*F + (r-1)*F + 1) f n < P g s = 0 OR r^2-8s is not a perfect square h For each i (0 .. maxi): h1 A[i]^(N-1) mod N = 1 h2 gcd(A[i]^((N-1)/Q[i])-1, N) = 1
ECPP
Type ECPP N 175806402118016161687545467551367 A 96642115784172626892568853507766 B 111378324928567743759166231879523 M 175806402118016177622955224562171 Q 2297612322987260054928384863 X 3273750212 Y 82061726986387565872737368000504
An elliptic curve primality block, typically generated with an Atkin/Morain ECPP implementation, but this should be adequate for anything using the Atkin-Goldwasser-Kilian-Morain style certificates. Some basic elliptic curve math is needed for these. This block verifies if:
. Note: A and B are allowed to be negative, with -1 not uncommon. . Let A = A % N . Let B = B % N a N > 0 b gcd(N, 6) = 1 c gcd(4*A^3 + 27*B^2, N) = 1 d Y^2 mod N = X^3 + A*X + B mod N e M >= N - 2*sqrt(N) + 1 f M <= N + 2*sqrt(N) + 1 g Q > (N^(1/4)+1)^2 h Q < N i M != Q j Q divides M . Note: EC(A,B,N,X,Y) is the point (X,Y) on Y^2 = X^3 + A*X + B, mod N . All values work in affine coordinates, but in theory other . representations work just as well. . Let POINT1 = (M/Q) * EC(A,B,N,X,Y) . Let POINT2 = M * EC(A,B,N,X,Y) [ = Q * POINT1 ] k POINT1 is not the identity l POINT2 is the identity
say "$n is definitely prime" if is_aks_prime($n);
Takes a positive number as input, and returns 1 if the input passes the Agrawal-Kayal-Saxena (AKS) primality test. This is a deterministic unconditional primality test which runs in polynomial time for general input.
While this is an important theoretical algorithm, and makes an interesting example, it is hard to overstate just how impractically slow it is in practice. It is not used for any purpose in non-theoretical work, as it is literally millions of times slower than other algorithms. From R.P. Brent, 2010: "AKS is not a practical algorithm. ECPP is much faster." We have ECPP, and indeed it is much faster.
my($U, $V, $Qk) = lucas_sequence($n, $P, $Q, $k)
Computes U_k
, V_k
, and Q_k
for the Lucas sequence defined by P
,Q
, modulo n
. The modular Lucas sequence is used in a number of primality tests and proofs. The following conditions must hold: D = P*P - 4*Q != 0
; 0 < P < n
; Q < n
; k >= 0
; n >= 2
.
Given a list of integers, returns the greatest common divisor. This is often used to test for coprimality.
Given a list of integers, returns the least common multiple. Note that we follow the semantics of Mathematica, Pari, and Perl 6, re:
lcm(0, n) = 0 Any zero in list results in zero return lcm(n,-m) = lcm(n, m) We use the absolute values
say "$n is square free" if moebius($n) != 0; $sum += moebius($_) for (1..200); say "Mertens(200) = $sum";
Returns μ(n), the Möbius function (also known as the Moebius, Mobius, or MoebiusMu function) for an integer input. This function is 1 if n = 1
, 0 if n
is not square free (i.e. n
has a repeated factor), and -1^t
if n
is a product of t
distinct primes. This is an important function in prime number theory. Like SAGE, we define moebius(0) = 0
for convenience.
If called with two arguments, they define a range low
to high
, and the function returns an array with the value of the Möbius function for every n from low to high inclusive. Large values of high will result in a lot of memory use. The algorithm used for ranges is Deléglise and Rivat (1996) algorithm 4.1, which is a segmented version of Lioen and van de Lune (1994) algorithm 3.2.
The return values are read-only constants. This should almost never come up, but it means trying to modify aliased return values will cause an exception (modifying the returned scalar or array is fine).
say "Mertens(10M) = ", mertens(10_000_000); # = 1037
Returns M(n), the Mertens function for a non-negative integer input. This function is defined as sum(moebius(1..n))
, but calculated more efficiently for large inputs. For example, computing Mertens(100M) takes:
time approx mem 0.3s 0.1MB mertens(100_000_000) 1.2s 890MB List::Util::sum(moebius(1,100_000_000)) 77s 0MB $sum += moebius($_) for 1..100_000_000
The summation of individual terms via factoring is quite expensive in time, though uses O(1) space. Using the range version of moebius is much faster, but returns a 100M element array which is not good for memory with this many items. In comparison, this function will generate the equivalent output via a sieving method that is relatively sparse memory and very fast. The current method is a simple n^1/2
version of Deléglise and Rivat (1996), which involves calculating all moebius values to n^1/2
, which in turn will require prime sieving to n^1/4
.
Various algorithms exist for this, using differing quantities of μ(n). The simplest way is to efficiently sum all n
values. Benito and Varona (2008) show a clever and simple method that only requires n/3
values. Deléglise and Rivat (1996) describe a segmented method using only n^1/3
values. The current implementation does a simple non-segmented n^1/2
version of their method. Kuznetsov (2011) gives an alternate method that he indicates is even faster. Lastly, one of the advanced prime count algorithms could be theoretically used to create a faster solution.
say "The Euler totient of $n is ", euler_phi($n);
Returns φ(n), the Euler totient function (also called Euler's phi or phi function) for an integer value. This is an arithmetic function which counts the number of positive integers less than or equal to n
that are relatively prime to n
. Given the definition used, euler_phi
will return 0 for all n < 1
. This follows the logic used by SAGE. Mathematica and Pari return euler_phi(-n)
for n < 0
. Mathematica returns 0 for n = 0
while Pari raises an exception.
If called with two arguments, they define a range low
to high
, and the function returns an array with the totient of every n from low to high inclusive.
say "Jordan's totient J_$k($n) is ", jordan_totient($k, $n);
Returns Jordan's totient function for a given integer value. Jordan's totient is a generalization of Euler's totient, where jordan_totient(1,$n) == euler_totient($n)
This counts the number of k-tuples less than or equal to n that form a coprime tuple with n. As with euler_phi
, 0 is returned for all n < 1
. This function can be used to generate some other useful functions, such as the Dedikind psi function, where psi(n) = J(2,n) / J(1,n)
.
say "exp(lambda($_)) = ", exp_mangoldt($_) for 1 .. 100;
Returns EXP(Λ(n)), the exponential of the Mangoldt function (also known as von Mangoldt's function) for an integer value. The Mangoldt function is equal to log p if n is prime or a power of a prime, and 0 otherwise. We return the exponential so all results are integers. Hence the return value for exp_mangoldt
is:
p if n = p^m for some prime p and integer m >= 1 1 otherwise.
Returns λ(n), the Liouville function for a non-negative integer input. This is -1 raised to Ω(n) (the total number of prime factors).
say chebyshev_theta(10000);
Returns θ(n), the first Chebyshev function for a non-negative integer input. This is the sum of the logarithm of each prime where p <= n
. An alternate computation is as the logarithm of n primorial. Hence these functions:
use List::Util qw/sum/; use Math::BigFloat; sub c1a { 0+sum( map { log($_) } @{primes(shift)} ) } sub c1b { Math::BigFloat->new(primorial(shift))->blog }
yield similar results, albeit slower and using more memory.
say chebyshev_psi(10000);
Returns ψ(n), the second Chebyshev function for a non-negative integer input. This is the sum of the logarithm of each prime power where p^k <= n
for an integer k. An alternate computation is as the summatory Mangoldt function. Another alternate computation is as the logarithm of LCM(1,2,...,n). Hence these functions:
use List::Util qw/sum/; use Math::BigFloat; sub c2a { 0+sum( map { log(exp_mangoldt($_)) } 1 .. shift ) } sub c2b { Math::BigFloat->new(consecutive_integer_lcm(shift))->blog }
yield similar results, albeit slower and using more memory.
say "Sum of divisors of $n:", divisor_sum( $n ); say "sigma_2($n) = ", divisor_sum($n, 2); say "Number of divisors: sigma_0($n) = ", divisor_sum($n, 0);
This function takes a positive integer as input and returns the sum of its divisors, including 1 and itself. An optional second argument k
may be given, which will result in the sum of the k-th
powers of the divisors to be returned.
This is known as the sigma function (see Hardy and Wright section 16.7, or OEIS A000203). The API is identical to Pari/GP's sigma
function. This function is useful for calculating things like aliquot sums, abundant numbers, perfect numbers, etc.
The second argument may also be a code reference, which is called for each divisor and the results are summed. This allows computation of other functions, but will be less efficient than using the numeric second argument. This corresponds to Pari/GP's sumdiv
function.
An example of the 5th Jordan totient (OEIS A059378):
divisor_sum( $n, sub { my $d=shift; $d**5 * moebius($n/$d); } );
though we have a function "jordan_totient" which is more efficient.
For numeric second arguments (sigma computations), the result will be a bigint if necessary. For the code reference case, the user must take care to return bigints if overflow will be a concern.
$prim = primorial(11); # 11# = 2*3*5*7*11 = 2310
Returns the primorial n#
of the positive integer input, defined as the product of the prime numbers less than or equal to n
. This is the OEIS series A034386: primorial numbers second definition.
primorial(0) == 1 primorial($n) == pn_primorial( prime_count($n) )
The result will be a Math::BigInt object if it is larger than the native bit size.
Be careful about which version (primorial
or pn_primorial
) matches the definition you want to use. Not all sources agree on the terminology, though they should give a clear definition of which of the two versions they mean. OEIS, Wikipedia, and Mathworld are all consistent, and these functions should match that terminology. This function should return the same result as the mpz_primorial_ui
function added in GMP 5.1.
$prim = pn_primorial(5); # p_5# = 2*3*5*7*11 = 2310
Returns the primorial number p_n#
of the positive integer input, defined as the product of the first n
prime numbers (compare to the factorial, which is the product of the first n
natural numbers). This is the OEIS series A002110: primorial numbers first definition.
pn_primorial(0) == 1 pn_primorial($n) == primorial( nth_prime($n) )
The result will be a Math::BigInt object if it is larger than the native bit size.
$lcm = consecutive_integer_lcm($n);
Given an unsigned integer argument, returns the least common multiple of all integers from 1 to n
. This can be done by manipulation of the primes up to n
, resulting in much faster and memory-friendly results than using a factorial.
Calculates the partition function p(n) for a non-negative integer input. This is the number of ways of writing the integer n as a sum of positive integers, without restrictions. This corresponds to Pari's numbpart
function and Mathematica's PartitionsP
function. The values produced in order are OEIS series A000041.
This uses a combinatorial calculation, which means it will not be very fast compared to Pari, Mathematica, or FLINT which use the Rademacher formula using multi-precision floating point. In 10 seconds:
65 Integer::Partition 10_000 MPU pure Perl partitions 200_000 MPU GMP partitions 22_000_000 Pari's numbpart 500_000_000 Jonathan Bober's partitions_c.cc v0.6
If you want the enumerated partitions, see Integer::Partition. It uses a memory efficient iterator and is very fast for enumeration. It is not practical for producing large partition numbers as seen above.
Returns the Carmichael function (also called the reduced totient function, or Carmichael λ(n)) of a positive integer argument. It is the smallest positive integer m
such that a^m = 1 mod n
for every integer a
coprime to n
. This is OEIS series A002322.
Returns the Kronecker symbol (a|n)
for two integers. The possible return values with their meanings for odd positive n
are:
0 a = 0 mod n 1 a is a quadratic residue modulo n (a = x^2 mod n for some x) -1 a is a quadratic non-residue modulo n
The Kronecker symbol is an extension of the Jacobi symbol to all integer values of n
from the latter's domain of positive odd values of n
. The Jacobi symbol is itself an extension of the Legendre symbol, which is only defined for odd prime values of n
. This corresponds to Pari's kronecker(a,n)
function and Mathematica's KroneckerSymbol[n,m]
function.
$order = znorder(2, next_prime(10**19)-6);
Given two positive integers a
and n
, returns the multiplicative order of a
modulo n
. This is the smallest positive integer k
such that a^k ≡ 1 mod n
. Returns 1 if a = 1
. Returns undef if a = 0
or if a
and n
are not coprime, since no value will result in 1 mod n. This corresponds to Pari's znorder(Mod(a,n))
function and Mathematica's MultiplicativeOrder[n]
function.
Given a positive integer n
, returns the smallest primitive root of (Z/nZ)^*
, or undef
if no root exists. A root exists when euler_phi($n) == carmichael_lambda($n)
, which will be true for all prime n
and some composites.
OEIS A033948 is a sequence of integers where the primitive root exists, while OEIS A046145 is a list of the smallest primitive roots, which is what this function produces.
$k = znlog($a, $g, $p)
Returns the integer k
that solves the equation a = g^k mod p
, or undef if no solution is found. This is the discrete logarithm problem. The implementation in this version is not very useful, but may be improved.
$phi = legendre_phi(1000000000, 41);
Given a non-negative integer n
and a non-negative prime number a
, returns the Legendre phi function (also called Legendre's sum). This is the count of positive integers <= n
which are not divisible by any of the first a
primes.
my $small_prime = random_prime(1000); # random prime <= limit my $rand_prime = random_prime(100, 10000); # random prime within a range
Returns a pseudo-randomly selected prime that will be greater than or equal to the lower limit and less than or equal to the upper limit. If no lower limit is given, 2 is implied. Returns undef if no primes exist within the range.
The goal is to return a uniform distribution of the primes in the range, meaning for each prime in the range, the chances are equally likely that it will be seen. This is removes from consideration such algorithms as PRIMEINC
, which although efficient, gives very non-random output. This also implies that the numbers will not be evenly distributed, since the primes are not evenly distributed. Stated differently, the random prime functions return a uniformly selected prime from the set of primes within the range. Hence given random_prime(1000)
, the numbers 2, 3, 487, 631, and 997 all have the same probability of being returned.
For small numbers, a random index selection is done, which gives ideal uniformity and is very efficient with small inputs. For ranges larger than this ~16-bit threshold but within the native bit size, a Monte Carlo method is used (multiple calls to irand
will be made if necessary). This also gives ideal uniformity and can be very fast for reasonably sized ranges. For even larger numbers, we partition the range, choose a random partition, then select a random prime from the partition. This gives some loss of uniformity but results in many fewer bits of randomness being consumed as well as being much faster.
If an irand
function has been set via "prime_set_config", it will be used to construct any ranged random numbers needed. The function should return a uniformly random 32-bit integer, which is how the irand functions exported by Math::Random::Secure, Math::Random::MT, Math::Random::ISAAC, and most other modules behave.
If no irand
function was set, then Bytes::Random::Secure is used with a non-blocking seed. This will create good quality random numbers, so there should be little reason to change unless one is generating long-term keys, where using the blocking random source may be preferred.
Examples of various ways to set your own irand function:
# System rand. You probably don't want to do this. prime_set_config(irand => sub { int(rand(4294967296)) }); # Math::Random::Secure. Uses ISAAC and strong seed methods. use Math::Random::Secure; prime_set_config(irand => \&Math::Random::Secure::irand); # Bytes::Random::Secure (OO interface with full control of options): use Bytes::Random::Secure (); BEGIN { my $rng = Bytes::Random::Secure->new( Bits => 512 ); sub irand { return $rng->irand; } } prime_set_config(irand => \&irand); # Crypt::Random. Uses Pari and /dev/random. Very slow. use Crypt::Random qw/makerandom/; prime_set_config(irand => sub { makerandom(Size=>32, Uniform=>1); }); # Mersenne Twister. Very fast, decent RNG, auto seeding. use Math::Random::MT::Auto; prime_set_config(irand=>sub {Math::Random::MT::Auto::irand() & 0xFFFFFFFF}); # Go back to MPU's default configuration prime_set_config(irand => undef);
say "My 4-digit prime number is: ", random_ndigit_prime(4);
Selects a random n-digit prime, where the input is an integer number of digits. One of the primes within that range (e.g. 1000 - 9999 for 4-digits) will be uniformly selected using the irand
function as described above.
If the number of digits is greater than or equal to the maximum native type, then the result will be returned as a BigInt. However, if the nobigint
configuration option is on, then output will be restricted to native size numbers, and requests for more digits than natively supported will result in an error. For better performance with large bit sizes, install Math::Prime::Util::GMP.
my $bigprime = random_nbit_prime(512);
Selects a random n-bit prime, where the input is an integer number of bits. A prime with the nth bit set will be uniformly selected, with randomness supplied via calls to the irand
function as described above.
For bit sizes of 64 and lower, "random_prime" is used, which gives completely uniform results in this range. For sizes larger than 64, Algorithm 1 of Fouque and Tibouchi (2011) is used, wherein we select a random odd number for the lower bits, then loop selecting random upper bits until the result is prime. This allows a more uniform distribution than the general "random_prime" case while running slightly faster (in contrast, for large bit sizes "random_prime" selects a random upper partition then loops on the values within the partition, which very slightly skews the results towards smaller numbers).
The irand
function is used for randomness, so all the discussion in "random_prime" about that applies here. The result will be a BigInt if the number of bits is greater than the native bit size. For better performance with large bit sizes, install Math::Prime::Util::GMP.
my $bigprime = random_strong_prime(512);
Constructs an n-bit strong prime using Gordon's algorithm. We consider a strong prime p to be one where
Using a strong prime in cryptography guards against easy factoring with algorithms like Pollard's Rho. Rivest and Silverman (1999) present a case that using strong primes is unnecessary, and most modern cryptographic systems agree. First, the smoothness does not affect more modern factoring methods such as ECM. Second, modern factoring methods like GNFS are far faster than either method so make the point moot. Third, due to key size growth and advances in factoring and attacks, for practical purposes, using large random primes offer security equivalent to strong primes.
Similar to "random_nbit_prime", the result will be a BigInt if the number of bits is greater than the native bit size. For better performance with large bit sizes, install Math::Prime::Util::GMP.
my $bigprime = random_proven_prime(512);
Constructs an n-bit random proven prime. Internally this may use "is_provable_prime"("random_nbit_prime") or "random_maurer_prime" depending on the platform and bit size.
my($n, $cert) = random_proven_prime_with_cert(512)
Similar to "random_proven_prime", but returns a two-element array containing the n-bit provable prime along with a primality certificate. The certificate is the same as produced by "prime_certificate" or "is_provable_prime_with_cert", and can be parsed by "verify_prime" or any other software that understands MPU primality certificates.
my $bigprime = random_maurer_prime(512);
Construct an n-bit provable prime, using the FastPrime algorithm of Ueli Maurer (1995). This is the same algorithm used by Crypt::Primes. Similar to "random_nbit_prime", the result will be a BigInt if the number of bits is greater than the native bit size. For better performance with large bit sizes, install Math::Prime::Util::GMP.
The differences between this function and that in Crypt::Primes are described in the "SEE ALSO" section.
Internally this additionally runs the BPSW probable prime test on every partial result, and constructs a primality certificate for the final result, which is verified. These provide additional checks that the resulting value has been properly constructed.
An alternative to this function is to run "is_provable_prime" on the result of "random_nbit_prime", which will provide more diversity and will be faster up to 512 or so bits. Maurer's method should be much faster for large bit sizes (larger than 2048). If you don't need absolutely proven results, then using "random_nbit_prime" followed by additional tests ("is_strong_pseudoprime" and/or "is_frobenius_underwood_pseudoprime") should be much faster.
my($n, $cert) = random_maurer_prime_with_cert(512)
As with "random_maurer_prime", but returns a two-element array containing the n-bit provable prime along with a primality certificate. The certificate is the same as produced by "prime_certificate" or "is_provable_prime_with_cert", and can be parsed by "verify_prime" or any other software that understands MPU primality certificates. The proof construction consists of a single chain of BLS3
types.
prime_precalc( 1_000_000_000 );
Let the module prepare for fast operation up to a specific number. It is not necessary to call this, but it gives you more control over when memory is allocated and gives faster results for multiple calls in some cases. In the current implementation this will calculate a sieve for all numbers up to the specified number.
prime_memfree;
Frees any extra memory the module may have allocated. Like with prime_precalc
, it is not necessary to call this, but if you're done making calls, or want things cleanup up, you can use this. The object method might be a better choice for complicated uses.
my $mf = Math::Prime::Util::MemFree->new; # perform operations. When $mf goes out of scope, memory will be recovered.
This is a more robust way of making sure any cached memory is freed, as it will be handled by the last MemFree
object leaving scope. This means if your routines were inside an eval that died, things will still get cleaned up. If you call another function that uses a MemFree object, the cache will stay in place because you still have an object.
my $cached_up_to = prime_get_config->{'precalc_to'};
Returns a reference to a hash of the current settings. The hash is copy of the configuration, so changing it has no effect. The settings include:
precalc_to primes up to this number are calculated maxbits the maximum number of bits for native operations xs 0 or 1, indicating the XS code is available gmp 0 or 1, indicating GMP code is available maxparam the largest value for most functions, without bigint maxdigits the max digits in a number, without bigint maxprime the largest representable prime, without bigint maxprimeidx the index of maxprime, without bigint assume_rh whether to assume the Riemann hypothesis (default 0)
prime_set_config( assume_rh => 1 );
Allows setting of some parameters. Currently the only parameters are:
xs Allows turning off the XS code, forcing the Pure Perl code to be used. Set to 0 to disable XS, set to 1 to re-enable. You probably will never want to do this. gmp Allows turning off the use of L<Math::Prime::Util::GMP>, which means using Pure Perl code for big numbers. Set to 0 to disable GMP, set to 1 to re-enable. You probably will never want to do this. assume_rh Allows functions to assume the Riemann hypothesis is true if set to 1. This defaults to 0. Currently this setting only impacts prime count lower and upper bounds, but could later be applied to other areas such as primality testing. A later version may also have a way to indicate whether no RH, RH, GRH, or ERH is to be assumed. irand Takes a code ref to an irand function returning a uniform number between 0 and 2**32-1. This will be used for all random number generation in the module.
my @factors = factor(3_369_738_766_071_892_021); # returns (204518747,16476429743)
Produces the prime factors of a positive number input, in numerical order. The product of the returned factors will be equal to the input. n = 1
will return an empty list, and n = 0
will return 0. This matches Pari.
In scalar context, returns Ω(n), the total number of prime factors (OEIS A001222). This corresponds to Pari's bigomega(n)
function and Mathematica's PrimeOmega[n]
function. This is same result that we would get if we evaluated the resulting array in scalar context.
The current algorithm for non-bigints is a sequence of small trial division, a few rounds of Pollard's Rho, SQUFOF, Pollard's p-1, Hart's OLF, a long run of Pollard's Rho, and finally trial division if anything survives. This process is repeated for each non-prime factor. In practice, it is very rare to require more than the first Rho + SQUFOF to find a factor, and I have not seen anything go to the last step.
Factoring bigints works with pure Perl, and can be very handy on 32-bit machines for numbers just over the 32-bit limit, but it can be very slow for "hard" numbers. Installing the Math::Prime::Util::GMP module will speed up bigint factoring a lot, and all future effort on large number factoring will be in that module. If you do not have that module for some reason, use the GMP or Pari version of bigint if possible (e.g. use bigint try => 'GMP,Pari'
), which will run 2-3x faster (though still 100x slower than the real GMP code).
my @factor_exponent_pairs = factor_exp(29513484000); # returns ([2,5], [3,4], [5,3], [7,2], [11,1], [13,2]) # factor(29513484000) # returns (2,2,2,2,2,3,3,3,3,5,5,5,7,7,11,13,13)
Produces pairs of prime factors and exponents in numerical factor order. This is more convenient for some algorithms. This is the same form that Mathematica's FactorInteger[n]
and Pari/GP's factorint
functions return. Note that Math::Pari transposes the Pari result matrix.
In scalar context, returns ω(n), the number of unique prime factors (OEIS A001221). This corresponds to Pari's omega(n)
function and Mathematica's PrimeNu[n]
function. This is same result that we would get if we evaluated the resulting array in scalar context.
The internals are identical to "factor", so all comments there apply. Just the way the factors are arranged is different.
my @divisors = divisors(30); # returns (1, 2, 3, 5, 6, 10, 15, 30)
Produces all the divisors of a positive number input, including 1 and the input number. The divisors are a power set of multiplications of the prime factors, returned as a uniqued sorted list. The result is identical to that of Pari's divisors
and Mathematica's Divisors[n]
functions.
In scalar context this returns the sigma0 function, the sigma function (see Hardy and Wright section 16.7, or OEIS A000203). This is the same result as evaluating the array in scalar context.
Also see the "for_divisors" functions for looping over the divisors.
all_factors
is the deprecated name for this function.
my @factors = trial_factor($n);
Produces the prime factors of a positive number input. The factors will be in numerical order. For large inputs this will be very slow.
my @factors = fermat_factor($n);
Produces factors, not necessarily prime, of the positive number input. The particular algorithm is Knuth's algorithm C. For small inputs this will be very fast, but it slows down quite rapidly as the number of digits increases. It is very fast for inputs with a factor close to the midpoint (e.g. a semiprime p*q where p and q are the same number of digits).
my @factors = holf_factor($n);
Produces factors, not necessarily prime, of the positive number input. An optional number of rounds can be given as a second parameter. It is possible the function will be unable to find a factor, in which case a single element, the input, is returned. This uses Hart's One Line Factorization with no premultiplier. It is an interesting alternative to Fermat's algorithm, and there are some inputs it can rapidly factor. In the long run it has the same advantages and disadvantages as Fermat's method.
my @factors = squfof_factor($n);
Produces factors, not necessarily prime, of the positive number input. An optional number of rounds can be given as a second parameter. It is possible the function will be unable to find a factor, in which case a single element, the input, is returned. This function typically runs very fast.
my @factors = prho_factor($n); my @factors = pbrent_factor($n); # Use a very small number of rounds my @factors = prho_factor($n, 1000);
Produces factors, not necessarily prime, of the positive number input. An optional number of rounds can be given as a second parameter. These attempt to find a single factor using Pollard's Rho algorithm, either the original version or Brent's modified version. These are more specialized algorithms usually used for pre-factoring very large inputs, as they are very fast at finding small factors.
my @factors = pminus1_factor($n); my @factors = pminus1_factor($n, 1_000); # set B1 smoothness my @factors = pminus1_factor($n, 1_000, 50_000); # set B1 and B2
Produces factors, not necessarily prime, of the positive number input. This is Pollard's p-1
method, using two stages with default smoothness settings of 1_000_000 for B1, and 10 * B1
for B2. This method can rapidly find a factor p
of n
where p-1
is smooth (it has no large factors).
my @factors = pplus1_factor($n); my @factors = pplus1_factor($n, 1_000); # set B1 smoothness
Produces factors, not necessarily prime, of the positive number input. This is Williams' p+1
method, using one stage and two predefined initial points.
my $Ei = ExponentialIntegral($x);
Given a non-zero floating point input x
, this returns the real-valued exponential integral of x
, defined as the integral of e^t/t dt
from -infinity
to x
.
If the bignum module has been loaded, all inputs will be treated as if they were Math::BigFloat objects.
For non-BigInt/BigFloat objects, the result should be accurate to at least 14 digits.
For BigInt / BigFloat objects, we first check to see if Math::MPFR is available. If so, then it is used since it is very fast and has high accuracy. Accuracy when using MPFR will be equal to the accuracy()
value of the input (or the default BigFloat accuracy, which is 40 by default).
MPFR is used for positive inputs only. If Math::MPFR is not available or the input is negative, then other methods are used: continued fractions (x < -1
), rational Chebyshev approximation ( -1 < x < 0
), a convergent series (small positive x
), or an asymptotic divergent series (large positive x
). Accuracy should be at least 14 digits.
my $li = LogarithmicIntegral($x)
Given a positive floating point input, returns the floating point logarithmic integral of x
, defined as the integral of dt/ln t
from 0
to x
. If given a negative input, the function will croak. The function returns 0 at x = 0
, and -infinity
at x = 1
.
This is often known as li(x)
. A related function is the offset logarithmic integral, sometimes known as Li(x)
which avoids the singularity at 1. It may be defined as Li(x) = li(x) - li(2)
. Crandall and Pomerance use the term li0
for this function, and define li(x) = Li0(x) - li0(2)
. Due to this terminology confusion, it is important to check which exact definition is being used.
If the bignum module has been loaded, all inputs will be treated as if they were Math::BigFloat objects.
For non-BigInt/BigFloat objects, the result should be accurate to at least 14 digits.
For BigInt / BigFloat objects, we first check to see if Math::MPFR is available. If so, then it is used, as it will return results much faster and can be more accurate. Accuracy when using MPFR will be equal to the accuracy()
value of the input (or the default BigFloat accuracy, which is 40 by default).
MPFR is used for inputs greater than 1 only. If Math::MPFR is not installed or the input is less than 1, results will be calculated as Ei(ln x)
.
my $z = RiemannZeta($s);
Given a floating point input s
where s >= 0
, returns the floating point value of ζ(s)-1, where ζ(s) is the Riemann zeta function. One is subtracted to ensure maximum precision for large values of s
. The zeta function is the sum from k=1 to infinity of 1 / k^s
. This function only uses real arguments, so is basically the Euler Zeta function.
If the bignum module has been loaded, all inputs will be treated as if they were Math::BigFloat objects.
For non-BigInt/BigFloat objects, the result should be accurate to at least 14 digits. The XS code uses a rational Chebyshev approximation between 0.5 and 5, and a series for other values. The PP code uses an identical series for all values.
For BigInt / BigFloat objects, we first check to see if the Math::MPFR module is installed. If so, then it is used, as it will return results much faster and can be more accurate. Accuracy when using MPFR will be equal to the accuracy()
value of the input (or the default BigFloat accuracy, which is 40 by default).
If Math::MPFR is not installed, then results are calculated using either Borwein (1991) algorithm 2, or the basic series. Full input accuracy is attempted, but Math::BigFloat RT 43692 produces incorrect high-accuracy computations without the fix. It is also very slow. I highly recommend installing Math::MPFR for BigFloat computations.
my $r = RiemannR($x);
Given a positive non-zero floating point input, returns the floating point value of Riemann's R function. Riemann's R function gives a very close approximation to the prime counting function.
If the bignum module has been loaded, all inputs will be treated as if they were Math::BigFloat objects.
For non-BigInt/BigFloat objects, the result should be accurate to at least 14 digits.
For BigInt / BigFloat objects, we first check to see if the Math::MPFR module is installed. If so, then it is used, as it will return results much faster and can be more accurate. Accuracy when using MPFR will be equal to the accuracy()
value of the input (or the default BigFloat accuracy, which is 40 by default). Accuracy without MPFR should be 35 digits.
Print strong pseudoprimes to base 17 up to 10M:
# Similar to A001262's isStrongPsp function, but much faster perl -MMath::Prime::Util=:all -E 'forcomposites { say if is_strong_pseudoprime($_,17) } 10000000;'
Print some primes above 64-bit range:
perl -MMath::Prime::Util=:all -Mbigint -E 'my $start=100000000000000000000; say join "\n", @{primes($start,$start+1000)}' # Another way perl -MMath::Prime::Util=:all -E 'forprimes { say } "100000000000000000039", "100000000000000000993"' # Similar using Math::Pari: # perl -MMath::Pari=:int,PARI,nextprime -E 'my $start = PARI "100000000000000000000"; my $end = $start+1000; my $p=nextprime($start); while ($p <= $end) { say $p; $p = nextprime($p+1); }'
Examining the η3(x) function of Planat and Solé (2011):
sub nu3 { my $n = shift; my $phix = chebyshev_psi($n); my $nu3 = 0; foreach my $nu (1..3) { $nu3 += (moebius($nu)/$nu)*LogarithmicIntegral($phix**(1/$nu)); } return $nu3; } say prime_count(1000000); say prime_count_approx(1000000); say nu3(1000000);
Construct and use a Sophie-Germain prime iterator:
sub make_sophie_germain_iterator { my $p = shift || 2; my $it = prime_iterator($p); return sub { do { $p = $it->() } while !is_prime(2*$p+1); $p; }; } my $sgit = make_sophie_germain_iterator(); print $sgit->(), "\n" for 1 .. 10000;
Project Euler, problem 3 (Largest prime factor):
use Math::Prime::Util qw/factor/; use bigint; # Only necessary for 32-bit machines. say 0+(factor(600851475143))[-1]
Project Euler, problem 7 (10001st prime):
use Math::Prime::Util qw/nth_prime/; say nth_prime(10_001);
Project Euler, problem 10 (summation of primes):
use Math::Prime::Util qw/forprimes/; my $sum = 0; forprimes { $sum += $_ } 2_000_000; say $sum;
Project Euler, problem 21 (Amicable numbers):
use Math::Prime::Util qw/divisor_sum/; sub dsum { my $n = shift; divisor_sum($n) - $n; } my $sum = 0; foreach my $a (1..10000) { my $b = dsum($a); $sum += $a + $b if $b > $a && dsum($b) == $a; } say $sum;
Project Euler, problem 41 (Pandigital prime), brute force command line:
perl -MMath::Prime::Util=primes -MList::Util=first -E 'say first { /1/&&/2/&&/3/&&/4/&&/5/&&/6/&&/7/} reverse @{primes(1000000,9999999)};'
Project Euler, problem 47 (Distinct primes factors):
use Math::Prime::Util qw/pn_primorial factor_exp/; my $n = pn_primorial(4); # Start with the first 4-factor number # factor_exp in scalar context returns the number of distinct prime factors $n++ while (factor_exp($n) != 4 || factor_exp($n+1) != 4 || factor_exp($n+2) != 4 || factor_exp($n+3) != 4); say $n;
Project Euler, problem 69, stupid brute force solution (about 1 second):
use Math::Prime::Util qw/euler_phi/; my ($n, $max) = (0,0); do { my $ndivphi = $_ / euler_phi($_); ($n, $max) = ($_, $ndivphi) if $ndivphi > $max; } for 1..1000000; say "$n $max";
Here is the right way to do PE problem 69 (under 0.03s):
use Math::Prime::Util qw/pn_primorial/; my $n = 0; $n++ while pn_primorial($n+1) < 1000000; say pn_primorial($n);
Project Euler, problem 187, stupid brute force solution, ~3 minutes:
use Math::Prime::Util qw/factor/; my $nsemis = 0; do { $nsemis++ if scalar factor($_) == 2; } for 1 .. int(10**8)-1; say $nsemis;
Here is the best way for PE187. Under 30 milliseconds from the command line:
use Math::Prime::Util qw/primes prime_count/; use List::Util qw/sum/; my $limit = shift || int(10**8); my @primes = @{primes(int(sqrt($limit)))}; say sum( map { prime_count(int(($limit-1)/$primes[$_-1])) - $_ + 1 } 1 .. scalar @primes );
Produce the matches
result from Math::Factor::XS without skipping:
use Math::Prime::Util qw/divisors/; use Algorithm::Combinatorics qw/combinations_with_repetition/; my $n = 139650; my @matches = grep { $_->[0] * $_->[1] == $n && $_->[0] > 1 } combinations_with_repetition( [divisors($n)], 2 );
Compute OEIS A054903 just like CRG4's Pari example:
use Math::Prime::Util qw/forcomposite divisor_sum/; forcomposites { say if divisor_sum($_)+6 == divisor_sum($_+6) } 9,1e7;
Construct the table shown in OEIS A046147:
use Math::Prime::Util qw/znorder euler_phi gcd/; foreach my $n (1..100) { if (!znprimroot($n)) { say "$n -"; } else { my $phi = euler_phi($n); my @r = grep { gcd($_,$n) == 1 && znorder($_,$n) == $phi } 1..$n-1; say "$n ", join(" ", @r); } }
Above 2^64
, "is_prob_prime" performs an extra-strong BPSW test which is fast (a little less than the time to perform 3 Miller-Rabin tests) and has no known counterexamples. If you trust the primality testing done by Pari, Maple, SAGE, FLINT, etc., then this function should be appropriate for you. "is_prime" will do the same BPSW test as well as some additional testing, making it slightly more time consuming but less likely to produce a false result. This is a little more stringent than Mathematica. "is_provable_prime" constructs a primality proof. If a certificate is requested, then either BLS75 theorem 5 or ECPP is performed. Without a certificate, the method is implementation specific (currently it is identical, but later releases may use APRCL). With Math::Prime::Util::GMP installed, this is quite fast through 300 or so digits.
Math systems 30 years ago typically used Miller-Rabin tests with k
bases (usually fixed bases, sometimes random) for primality testing, but these have generally been replaced by some form of BPSW as used in this module. See Pinch's 1993 paper for examples of why using k
M-R tests leads to poor results. The three exceptions in common contemporary use I am aware of are:
Uses the first k
prime bases. This is problematic for cryptographic use, as there are known methods (e.g. Arnault 1994) for constructing counterexamples. The number of bases required to avoid false results is unreasonably high, hence performance is slow even if one ignores counterexamples. Unfortunately this is the multi-precision math library used for Perl 6 and at least one CPAN Crypto module.
Uses a set of k
static-random bases. The bases are randomly chosen using a PRNG that is seeded identically each call (the seed changes with each release). This offers a very slight advantage over using the first k
prime bases, but not much. See, for example, Nicely's mpz_probab_prime_p pseudoprimes page.
Pari 2.1.7 is the default version installed with the Math::Pari module. It uses 10 random M-R bases (the PRNG uses a fixed seed set at compile time). Pari 2.3.0 was released in May 2006 and it, like all later releases through at least 2.6.1, use BPSW / APRCL, after complaints of false results from using M-R tests.
Basically the problem is that it is just too easy to get counterexamples from running k
M-R tests, forcing one to use a very large number of tests (at least 20) to avoid frequent false results. Using the BPSW test results in no known counterexamples after 30+ years and runs much faster. It can be enhanced with one or more random bases if one desires, and will still be much faster.
Using k
fixed bases has another problem, which is that in any adversarial situation we can assume the inputs will be selected such that they are one of our counterexamples. Now we need absurdly large numbers of tests. This is like playing "pick my number" but the number is fixed forever at the start, the guesser gets to know everyone else's guesses and results, and can keep playing as long as they like. It's only valid if the players are completely oblivious to what is happening.
Perl versions earlier than 5.8.0 have problems doing exact integer math. Some operations will flip signs, and many operations will convert intermediate or output results to doubles, which loses precision on 64-bit systems. This causes numerous functions to not work properly. The test suite will try to determine if your Perl is broken (this only applies to really old versions of Perl compiled for 64-bit when using numbers larger than ~ 2^49
). The best solution is updating to a more recent Perl.
The module is thread-safe and should allow good concurrency on all platforms that support Perl threads except Win32. With Win32, either don't use threads or make sure prime_precalc
is called before using primes
, prime_count
, or nth_prime
with large inputs. This is only an issue if you use non-Cygwin Win32 and call these routines from within Perl threads.
This section describes other CPAN modules available that have some feature overlap with this one. Also see the "REFERENCES" section. Please let me know if any of this information is inaccurate. Also note that just because a module doesn't match what I believe are the best set of features, doesn't mean it isn't perfect for someone else.
I will use SoE to indicate the Sieve of Eratosthenes, and MPU to denote this module (Math::Prime::Util). Some quick alternatives I can recommend if you don't want to use MPU:
Math::Prime::XS has is_prime
and primes
functionality. There is no bigint support. The is_prime
function uses well-written trial division, meaning it is very fast for small numbers, but terribly slow for large 64-bit numbers. MPU is similarly fast with small numbers, but becomes faster as the size increases. MPXS's prime sieve is an unoptimized non-segmented SoE which returns an array. Sieve bases larger than 10^7
start taking inordinately long and using a lot of memory (gigabytes beyond 10^10
). E.g. primes(10**9, 10**9+1000)
takes 36 seconds with MPXS, but only 0.00015 seconds with MPU.
Math::Prime::FastSieve supports primes
, is_prime
, next_prime
, prev_prime
, prime_count
, and nth_prime
. The caveat is that all functions only work within the sieved range, so are limited to about 10^10
. It uses a fast SoE to generate the main sieve. The sieve is 2-3x slower than the base sieve for MPU, and is non-segmented so cannot be used for larger values. Since the functions work with the sieve, they are very fast. The fast bit-vector-lookup functionality can be replicated in MPU using prime_precalc
but is not required.
Bit::Vector supports the primes
and prime_count
functionality in a somewhat similar way to Math::Prime::FastSieve. It is the slowest of all the XS sieves, and has the most memory use. It is faster than pure Perl code.
Crypt::Primes supports random_maurer_prime
functionality. MPU has more options for random primes (n-digit, n-bit, ranged, and strong) in addition to Maurer's algorithm. MPU does not have the critical bug RT81858. MPU should have a more uniform distribution as well as return a larger subset of primes (RT81871). MPU does not depend on Math::Pari though can run slow for bigints unless the Math::BigInt::GMP or Math::BigInt::Pari modules are installed. Having Math::Prime::Util::GMP installed also helps performance for MPU. Crypt::Primes is hardcoded to use Crypt::Random, while MPU uses Bytes::Random::Secure, and also allows plugging in a random function. This is more flexible, faster, has fewer dependencies, and uses a CSPRNG for security. MPU can return a primality certificate. What Crypt::Primes has that MPU does not is the ability to return a generator.
Math::Factor::XS calculates prime factors and factors, which correspond to the "factor" and "divisors" functions of MPU. These functions do not support bigints. Both are implemented with trial division, meaning they are very fast for really small values, but quickly become unusably slow (factoring 19 digit semiprimes is over 700 times slower). The function count_prime_factors
can be done in MPU using scalar factor($n)
. MPU has no equivalent to matches
, but see the "EXAMPLES" section for a way to produce the results.
Math::Big version 1.12 includes primes
functionality. The current code is only usable for very tiny inputs as it is incredibly slow and uses lots of memory. RT81986 has a patch to make it run much faster and use much less memory. Since it is in pure Perl it will still run quite slow compared to MPU.
Math::Big::Factors supports factorization using wheel factorization (smart trial division). It supports bigints. Unfortunately it is extremely slow on any input that isn't the product of just small factors. Even 7 digit inputs can take hundreds or thousands of times longer to factor than MPU or Math::Factor::XS. 19-digit semiprimes will take hours versus MPU's single milliseconds.
Math::Factoring is a placeholder module for bigint factoring. Version 0.02 only supports trial division (the Pollard-Rho method does not work).
Math::Prime::TiedArray allows random access to a tied primes array, almost identically to what MPU provides in Math::Prime::Util::PrimeArray. MPU has attempted to fix Math::Prime::TiedArray's shift bug (RT58151). MPU is typically much faster and will use less memory, but there are some cases where MP:TA is faster (MP:TA stores all entries up to the largest request, while MPU:PA stores only a window around the last request).
Math::Primality supports is_prime
, is_pseudoprime
, is_strong_pseudoprime
, is_strong_lucas_pseudoprime
, next_prime
, prev_prime
, prime_count
, and is_aks_prime
functionality. This is a great little module that implements primality functionality. It was the first CPAN module to support the BPSW test. All inputs are processed using GMP, so it of course supports bigints. In fact, Math::Primality was made originally with bigints in mind, while MPU was originally targeted to native integers, but both have added better support for the other. The main differences are extra functionality (MPU has more functions) and performance. With native integer inputs, MPU is generally much faster, especially with "prime_count". For bigints, MPU is slower unless the Math::Prime::Util::GMP module is installed, in which case MPU is ~2x faster. Math::Primality also installs a primes.pl
program, but it has much less functionality than the one included with MPU.
Math::NumSeq does not have a one-to-one mapping between functions in MPU, but it does offer a way to get many similar results such as primes, twin primes, Sophie-Germain primes, lucky primes, moebius, divisor count, factor count, Euler totient, primorials, etc. Math::NumSeq is set up for accessing these values in order rather than for arbitrary values, though a few sequences support random access. The primary advantage I see is the uniform access mechanism for a lot of sequences. For those methods that overlap, MPU is usually much faster. Importantly, most of the sequences in Math::NumSeq are limited to 32-bit indices.
Math::Pari supports a lot of features, with a great deal of overlap. In general, MPU will be faster for native 64-bit integers, while it's differs for bigints (Pari will always be faster if Math::Prime::Util::GMP is not installed; with it, it varies by function). Note that Pari extends many of these functions to other spaces (Gaussian integers, complex numbers, vectors, matrices, polynomials, etc.) which are beyond the realm of this module. Some of the highlights:
isprime
The default Math::Pari is built with Pari 2.1.7. This uses 10 M-R tests with randomly chosen bases (fixed seed, but doesn't reset each invocation like GMP's is_probab_prime
). This has a greater chance of false positives compared to the BPSW test. Calling with isprime($n,1)
will perform a Pocklington-Lehmer n-1
proof, but this becomes unreasonably slow past 70 or so digits.
If Math::Pari is built using Pari 2.3.5 (this requires manual configuration) then the primality tests are completely different. Using ispseudoprime
will perform a BPSW test and is quite a bit faster than the older test. isprime
now does an APR-CL proof (fast, but no certificate).
Math::Primality uses a strong BPSW test, which is the standard BPSW test based on the 1980 paper. It has no known counterexamples (though like all these tests, we know some exist). Pari 2.3.5 (and through at least 2.6.2) uses an almost-extra-strong BPSW test for its ispseudoprime
function. This is deterministic for native integers, and should be excellent for bigints, with a slightly lower chance of counterexamples than the traditional strong test. Math::Prime::Util uses the full extra-strong BPSW test, which has an even lower chance of counterexample. With Math::Prime::Util::GMP, is_prime
adds 1 to 5 extra M-R tests using random bases, which further reduces the probability of a composite being allowed to pass.
primepi
Only available with version 2.3 of Pari. Similar to MPU's "prime_count" function in API, but uses a naive counting algorithm with its precalculated primes, so is not of practical use. Incidently, Pari 2.6 (not usable from Perl) has fixed the pre-calculation requirement so it is more useful, but is still thousands of times slower than MPU.
primes
Doesn't support ranges, requires bumping up the precalculated primes for larger numbers, which means knowing in advance the upper limit for primes. Support for numbers larger than 400M requires using Pari version 2.3.5. If that is used, sieving is about 2x faster than MPU, but doesn't support segmenting.
factorint
Similar to MPU's "factor_exp" though with a slightly different return. MPU offers "factor" for a linear array of prime factors where n = p1 * p2 * p3 * ... as (p1,p2,p3,...) and "factor_exp" for an array of factor/exponent pairs where: n = p1^e1 * p2^e2 * ... as ([p1,e1],[p2,e2],...) Pari/GP returns an array similar to the latter. Math::Pari returns a transposed matrix like: n = p1^e1 * p2^e2 * ... as ([p1,p2,...],[e1,e2,...]) Slower than MPU for all 64-bit inputs on an x86_64 platform, it may be faster for large values on other platforms. With the newer Math::Prime::Util::GMP releases, bigint factoring is slightly faster on average in MPU.
divisors
Similar to MPU's "divisors".
forprime
, forcomposite
, fordiv
, sumdiv
Similar to MPU's "forprimes", "forcomposites", "fordivisors", and "divisor_sum".
eulerphi
, moebius
Similar to MPU's "euler_phi" and "moebius". MPU is 2-20x faster for native integers. MPU also supported range inputs, which can be much more efficient. Without Math::Prime::Util::GMP installed, MPU is very slow with bigints. With it installed, it is about 2x slower than Math::Pari.
gcd
, lcm
, kronecker
, znorder
, znprimroot
Similar to MPU's "gcd", "lcm", "kronecker", "znorder", and "znprimroot". Pari's znprimroot
only returns the smallest root for prime powers. The behavior is undefined when the group is not cyclic (sometimes it throws an exception, sometimes it returns an incorrect answer). MPU's "znprimroot" will always return the smallest root if it exists, and undef
otherwise.
sigma
Similar to MPU's "divisor_sum". MPU is ~10x faster for native integers and about 2x slower for bigints.
numbpart
Similar to MPU's "partitions". This function is not in Pari 2.1, which is the default version used by Math::Pari. With Pari 2.3 or newer, the functions produce identical results, but Pari is much, much faster.
eint1
Similar to MPU's "ExponentialIntegral".
zeta
MPU has "RiemannZeta" which takes non-negative real inputs, while Pari's function supports negative and complex inputs.
Overall, Math::Pari supports a huge variety of functionality and has a sophisticated and mature code base behind it (noting that the default version of Pari used is about 10 years old now). For native integers often using Math::Pari will be slower, but bigints are often superior and it rarely has any performance surprises. Some of the unique features MPU offers include super fast prime counts, nth_prime, ECPP primality proofs with certificates, approximations and limits for both, random primes, fast Mertens calculations, Chebyshev theta and psi functions, and the logarithmic integral and Riemann R functions. All with fairly minimal installation requirements.
First, for those looking for the state of the art non-Perl solutions:
For general numbers smaller than 2000 or so digits, I believe MPU is the fastest solution (it is faster than Pari 2.6.2 and PFGW), though FLINT might be a little faster for native sizes. For large inputs, PFGW is the fastest primality testing software I'm aware of. It has fast trial division, and is especially fast on many special forms. It does not have a BPSW test however, and there are quite a few counterexamples for a given base of its PRP test, so for primality testing it is most useful for fast filtering of very large candidates. A test such as the BPSW test in this module is then recommended.
Primo is the best method for open source primality proving for inputs over 1000 digits. Primo also does well below that size, but other good alternatives are WraithX APRCL, the APRCL from the modern Pari package, or the standalone ECPP from this module with large polynomial set.
yafu, msieve, and gmp-ecm are all good choices for large inputs. The factoring code in this module (and all other CPAN modules) is very limited compared to those.
primesieve and yafu are the fastest publically available code I am aware of. Primesieve will additionally take advantage of multiple cores with excellent efficiency. Tomás Oliveira e Silva's private code may be faster for very large values, but isn't available for testing.
Note that the Sieve of Atkin is not faster than the Sieve of Eratosthenes when both are well implemented. The only Sieve of Atkin that is even competitive is Bernstein's super optimized primegen, which runs on par with the SoE in this module. The SoE's in Pari, yafu, and primesieve are all faster.
Outside of private research implementations doing prime counts for n > 2^64
, this module should be close to state of the art in performance, and supports results up to 2^64
. Further performance improvements are planned, as well as expansion to larger values.
The fastest solution for small inputs is a hybrid table/sieve method. This module does this for values below 60M. As the inputs get larger, either the tables have to grow exponentially or speed must be sacrificed. Hence this is not a good general solution for most uses.
Counting the primes to 800_000_000
(800 million):
Time (s) Module Version Notes --------- -------------------------- ------- ----------- 0.002 Math::Prime::Util 0.35 using extended LMO 0.007 Math::Prime::Util 0.12 using Lehmer's method 0.27 Math::Prime::Util 0.17 segmented mod-30 sieve 0.39 Math::Prime::Util::PP 0.24 Perl (Lehmer's method) 0.9 Math::Prime::Util 0.01 mod-30 sieve 2.9 Math::Prime::FastSieve 0.12 decent odd-number sieve 11.7 Math::Prime::XS 0.26 needs some optimization 15.0 Bit::Vector 7.2 48.9 Math::Prime::Util::PP 0.14 Perl (fastest I know of) 170.0 Faster Perl sieve (net) 2012-01 array of odds 548.1 RosettaCode sieve (net) 2012-06 simplistic Perl 3048.1 Math::Primality 0.08 Perl + Math::GMPz >20000 Math::Big 1.12 Perl, > 26GB RAM used
Python's standard modules are very slow: MPMATH v0.17 primepi
takes 169.5s and 25+ GB of RAM. SymPy 0.7.1 primepi
takes 292.2s. However there are very fast solutions written by Robert William Hanks (included in the xt/ directory of this distribution): pure Python in 12.1s and NUMPY in 2.8s.
2.6s Math::Prime::Util (sieve lookup if prime_precalc used) 3.4s Math::Prime::FastSieve (sieve lookup) 4.4s Math::Prime::Util (trial + deterministic M-R) 10.9s Math::Prime::XS (trial) 36.5s Math::Pari w/2.3.5 (BPSW) 78.2s Math::Pari (10 random M-R) 501.3s Math::Primality (deterministic M-R)
7.0s Math::Prime::Util (BPSW) 42.6s Math::Pari w/2.3.5 (BPSW) 144.3s Math::Pari (10 random M-R) 664.0s Math::Primality (BPSW) 30 HRS Math::Prime::XS (trial) These inputs are too large for Math::Prime::FastSieve.
2.5s Math::Prime::Util (BPSW + 1 random M-R) 3.0s Math::Pari w/2.3.5 (BPSW) 12.9s Math::Primality (BPSW) 35.3s Math::Pari (10 random M-R) 53.5s Math::Prime::Util w/o GMP (BPSW) 94.4s Math::Prime::Util (n-1 or ECPP proof) 102.7s Math::Pari w/2.3.5 (APR-CL proof)
Factoring performance depends on the input, and the algorithm choices used are still being tuned. Math::Factor::XS is very fast when given input with only small factors, but it slows down rapidly as the smallest factor increases in size. For numbers larger than 32 bits, Math::Prime::Util can be 100x or more faster (a number with only very small factors will be nearly identical, while a semiprime with large factors will be the extreme end). Math::Pari is much slower with native sized inputs, probably due to calling overhead. For bigints, the Math::Prime::Util::GMP module is needed or performance will be far worse than Math::Pari. With the GMP module, performance is pretty similar from 20 through 70 digits, which the caveat that the current MPU factoring uses more memory for 60+ digit numbers.
This slide presentation has a lot of data on 64-bit and GMP factoring performance I collected in 2009. Assuming you do not know anything about the inputs, trial division and optimized Fermat or Lehman work very well for small numbers (<= 10 digits), while native SQUFOF is typically the method of choice for 11-18 digits (I've seen claims that a lightweight QS can be faster for 15+ digits). Some form of Quadratic Sieve is usually used for inputs in the 19-100 digit range, and beyond that is the General Number Field Sieve. For serious factoring, I recommend looking at yafu, msieve, gmp-ecm, GGNFS, and Pari. The latest yafu should cover most uses, with GGNFS likely only providing a benefit for numbers large enough to warrant distributed processing.
The n-1
proving algorithm in Math::Prime::Util::GMP compares well to the version including in Pari. Both are pretty fast to about 60 digits, and work reasonably well to 80 or so before starting to take many minutes per number on a fast computer. Version 0.09 and newer of MPU::GMP contain an ECPP implementation that, while not state of the art compared to closed source solutions, works quite well. It averages less than a second for proving 200-digit primes including creating a certificate. Times below 200 digits are faster than Pari 2.3.5's APR-CL proof. For larger inputs the bottleneck is a limited set of discriminants, and time becomes more variable. There is a larger set of discriminants on github that help, with 300-digit primes taking ~5 seconds on average and typically under a minute for 500-digits. For primality proving with very large numbers, I recommend Primo.
Seconds per prime for random prime generation on a circa-2009 workstation, with Math::BigInt::GMP, Math::Prime::Util::GMP, and Math::Random::ISAAC::XS installed.
bits random +testing rand_prov Maurer CPMaurer ----- -------- -------- --------- -------- -------- 64 0.0001 +0.000008 0.0002 0.0001 0.022 128 0.0020 +0.00023 0.011 0.063 0.057 256 0.0034 +0.0004 0.058 0.13 0.16 512 0.0097 +0.0012 0.28 0.28 0.41 1024 0.060 +0.0060 0.65 0.65 2.19 2048 0.57 +0.039 4.8 4.8 10.99 4096 6.24 +0.25 31.9 31.9 79.71 8192 58.6 +1.61 234.0 234.0 947.3 random = random_nbit_prime (results pass BPSW) random+ = additional time for 3 M-R and a Frobenius test rand_prov = random_proven_prime maurer = random_maurer_prime CPMaurer = Crypt::Primes::maurer
"random_nbit_prime" is reasonably fast, and for most purposes should suffice. For cryptographic purposes, one may want additional tests or a proven prime. Additional tests are quite cheap, as shown by the time for three extra M-R and a Frobenius test. At these bit sizes, the chances a composite number passes BPSW, three more M-R tests, and a Frobenius test is extraordinarily small.
"random_proven_prime" provides a randomly selected prime with an optional certificate, without specifying the particular method. Below 512 bits, using "is_provable_prime"("random_nbit_prime") is typically faster than Maurer's algorithm, but becomes quite slow as the bit size increases. This leaves the decision of the exact method of proving the result to the implementation.
"random_maurer_prime" constructs a provable prime. A primality test is run on each intermediate, and it also constructs a complete primality certificate which is verified at the end (and can be returned). While the result is uniformly distributed, only about 10% of the primes in the range are selected for output. This is a result of the FastPrime algorithm and is usually unimportant.
"maurer" in Crypt::Primes times are included for comparison. It is pretty fast for small sizes but gets slow as the size increases. It does not perform any primality checks on the intermediate results or the final result (I highly recommended you run a primality test on the output). Additionally important for servers, "maurer" in Crypt::Primes uses excessive system entropy and can grind to a halt if /dev/random
is exhausted (it can take days to return). The times above are on a machine running HAVEGED so never waits for entropy. Without this, the times would be much higher.
Dana Jacobsen <dana@acm.org>
Eratosthenes of Cyrene provided the elegant and simple algorithm for finding primes.
Terje Mathisen, A.R. Quesada, and B. Van Pelt all had useful ideas which I used in my wheel sieve.
Tomás Oliveira e Silva has released the source for a very fast segmented sieve. The current implementation does not use these ideas. Future versions might.
The SQUFOF implementation being used is a slight modification to the public domain racing version written by Ben Buhrow. Enhancements with ideas from Ben's later code as well as Jason Papadopoulos's public domain implementations are planned for a later version.
The LMO implementation is based on the 2003 preprint from Christian Bau, as well as the 2006 paper from Tomás Oliveira e Silva. I also want to thank Kim Walisch for the many discussions about prime counting.
Copyright 2011-2014 by Dana Jacobsen <dana@acm.org>
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.