Moose::Manual::Delta - Important Changes in Moose
version 2.0204
This documents any important or noteworthy changes in Moose, with a focus on things that affect backwards compatibility. This does duplicate data from the Changes file, but aims to provide more details and when possible workarounds.
Besides helping keep up with changes, you can also use this document for finding the lowest version of Moose that supported a given feature. If you encounter a problem and have a solution but don't see it documented here, or think we missed an important feature, please send us a patch.
Moose allows you to provide a hand-optimized version of a type constraint's subroutine reference. This version allows type constraints to generate inline code, and you should use this inlining instead of providing a hand-optimized subroutine reference.
This affects the optimize_as
sub exported by Moose::Util::TypeConstraints.
Use inline_as
instead.
This will start warning in the 2.0300 release.
If you have Devel::PartialDump version 0.14 or higher installed, Moose's type constraint error messages will use it to display the invalid value, rather than just displaying it directly. This will generally be much more useful. For instance, instead of this:
Attribute (foo) does not pass the type constraint because: Validation failed for 'ArrayRef[Int]' with value ARRAY(0x275eed8)
the error message will instead look like
Attribute (foo) does not pass the type constraint because: Validation failed for 'ArrayRef[Int]' with value [ "a" ]
Note that Devel::PartialDump can't be made a direct dependency at the moment, because it uses Moose itself, but we're considering options to make this easier.
Previously, when a role was applied to a class, it would use the attribute metaclass defined in the class when copying over the attributes in the role. This was wrong, because for instance, using MooseX::FollowPBP in the class would end up renaming all of the accessors generated by the role, some of which may be being called in the role, causing it to break. Roles now keep track of their own attribute metaclass to use by default when being applied to a class (defaulting to Moose::Meta::Attribute). This is modifiable using Moose::Util::MetaRole by passing the applied_attribute
key to the role_metaroles
option, as in:
Moose::Util::MetaRole::apply_metaroles( for => __PACKAGE__, class_metaroles => { attribute => ['My::Meta::Role::Attribute'], }, role_metaroles => { applied_attribute => ['My::Meta::Role::Attribute'], }, );
Moose and Class::MOP are tightly related enough that they have always had to be kept pretty closely in step in terms of versions. Making them into a single dist should simplify the upgrade process for users, as it should no longer be possible to upgrade one without the other and potentially cause issues. No functionality has changed, and this should be entirely transparent.
There are two parts to this. The most useful one right now is that Moose will ship with a moose-outdated
script, which can be run at any point to list the modules which are installed that conflict with the installed version of Moose. After upgrading Moose, running moose-outdated | cpanm
should be sufficient to ensure that all of the Moose extensions you use will continue to work.
The other part is that Moose's META.json
file will also specify the conflicts under the x_conflicts
key. We are working with the Perl tool chain developers to try to get conflicts support added to CPAN clients, and if/when that happens, the metadata already exists, and so the conflict checking will become automatic.
Most of the deprecated APIs and features in Moose will start throwing an error in Moose 2.0200. Some of the features will go away entirely, and some will simply throw an error.
The things on the chopping block are:
This includes things like Class::MOP::Class->get_attribute_map
, Class::MOP::Class->construct_instance
, and many others. These were deprecated in Class::MOP 0.80_01, released on April 5, 2009.
These methods will be removed entirely in Moose 2.0200.
This include Class::MOP::subname
, Class::MOP::in_global_destruction
, and the Class::MOP::HAS_ISAREV
constant. The first two were deprecated in 0.84, and the last in 0.80. Class::MOP 0.84 was released on May 12, 2009.
These functions will be removed entirely in Moose 2.0200.
alias
and excludes
option for role composition
These were renamed to -alias
and -excludes
in Moose 0.89, released on August 13, 2009.
Passing these will throw an error in Moose 2.0200.
This include the apply_metaclass_roles()
function, as well as passing the for_class
or any key ending in _roles
to apply_metaroles()
. This was deprecated in Moose 0.93_01, released on January 4, 2010.
These will all throw an error in Moose 2.0200.
type()
or subtype()
The old API for these functions allowed you to pass a plain list of parameter, rather than a list of hash references (which is what as()
, where
, etc. return). This was deprecated in Moose 0.71_01, released on February 22, 2009.
This will throw an error in Moose 2.0200.
This subtype was deprecated in Moose 0.84, released on June 26, 2009.
This will be removed entirely in Moose 2.0200.
As of the 2.0 release, Moose now has an official release and support policy, documented in Moose::Manual::Support. All API changes will now go through a deprecation cycle of at least one year, after which the deprecated API can be removed. Deprecations and removals will only happen in major releases.
In between major releases, we will still make minor releases to add new features, fix bugs, update documentation, etc.
Classes which use the Moose::Error::Default error class can now have stacktraces disabled by setting the MOOSE_ERROR_STYLE
env var to croak
. This is experimental, fairly incomplete, and won't work in all cases (because Moose's error system in general is all of these things), but this should allow for reducing at least some of the verbosity in most cases.
In previous versions of Moose, the Native delegations were created as closures. The generated code was often quite slow compared to doing the same thing by hand. For example, the Array's push delegation ended up doing something like this:
push @{ $self->$reader() }, @_;
If the attribute was created without a reader, the $reader
sub reference followed a very slow code path. Even with a reader, this is still slower than it needs to be.
Native delegations are now generated as inline code, just like other accessors, so we can access the slot directly.
In addition, native traits now do proper constraint checking in all cases. In particular, constraint checking has been improved for array and hash references. Previously, only the contained type (the Str
in HashRef[Str]
) would be checked when a new value was added to the collection. However, if there was a constraint that applied to the whole value, this was never checked.
In addition, coercions are now called on the whole value.
The delegation methods now do more argument checking. All of the methods check that a valid number of arguments were passed to the method. In addition, the delegation methods check that the arguments are sane (array indexes, hash keys, numbers, etc.) when applicable. We have tried to emulate the behavior of Perl builtins as much as possible.
Finally, triggers are called whenever the value of the attribute is changed by a Native delegation.
These changes are only likely to break code in a few cases.
The inlining code may or may not preserve the original reference when changes are made. In some cases, methods which change the value may replace it entirely. This will break tied values.
If you have a typed arrayref or hashref attribute where the type enforces a constraint on the whole collection, this constraint will now be checked. It's possible that code which previously ran without errors will now cause the constraint to fail. However, presumably this is a good thing ;)
If you are passing invalid arguments to a delegation which were previously being ignored, these calls will now fail.
If your code relied on the trigger only being called for a regular writer, that may cause problems.
As always, you are encouraged to test before deploying the latest version of Moose to production.
A few native traits (String, Counter, Bool) provide default values of "is" and "default" when you created an attribute. Allowing them to provide these values is now deprecated. Supply the value yourself when creating the attribute.
meta
methodMoose and Class::MOP have been cleaned up internally enough to make the meta
method that you get by default optional. use Moose
and use Moose::Role
now can take an additional -meta_name
option, which tells Moose what name to use when installing the meta
method. Passing undef
to this option suppresses generation of the meta
method entirely. This should be useful for users of modules which also use a meta
method or function, such as Curses or Rose::DB::Object.
Previously, deprecation mostly consisted of simply saying "X is deprecated" in the Changes file. We were not very consistent about actually warning. Now, all deprecated features still present in Moose actually give a warning. The warning is issued once per calling package. See Moose::Deprecated for more details.
coerce => 1
unless the attribute's type constraint has a coercionPreviously, this was accepted, and it sort of worked, except that if you attempted to set the attribute after the object was created, you would get a runtime error.
Now you will get a warning when you attempt to define the attribute.
no Moose
, no Moose::Role
, and no Moose::Exporter
no longer unimport strict and warningsThis change was made in 1.05, and has now been reverted. We don't know if the user has explicitly loaded strict or warnings on their own, and unimporting them is just broken in that case.
Moose::Meta::Attribute now allows all options to be changed in an overridden attribute. The previous behaviour required each option to be whitelisted using the legal_options_for_inheritance
method. This method has been removed, and there is a new method, illegal_options_for_inheritance
, which can now be used to prevent certain options from being changeable.
In addition, we only throw an error if the illegal option is actually changed. If the superclass didn't specify this option at all when defining the attribute, the subclass version can still add it as an option.
Example of overriding this in an attribute trait:
package Bar::Meta::Attribute; use Moose::Role; has 'my_illegal_option' => ( isa => 'CodeRef', is => 'rw', ); around illegal_options_for_inheritance => sub { return ( shift->(@_), qw/my_illegal_option/ ); };
new_object
Previously, BUILD
methods would only be called from Moose::Object::new
, but now they are also called when constructing an object via Moose::Meta::Class::new_object
. BUILD
methods are an inherent part of the object construction process, and this should make $meta->new_object
actually usable without forcing people to use $meta->name->new
.
no Moose
, no Moose::Role
, and no Moose::Exporter
now unimport strict and warningsIn the interest of having no Moose
clean up everything that use Moose
does in the calling scope, no Moose
(as well as all other Moose::Exporter-using modules) now unimports strict and warnings.
The metaclass compatibility checking and fixing algorithms have been completely rewritten, in both Class::MOP and Moose. This should resolve many confusing errors when dealing with non-Moose inheritance and with custom metaclasses for things like attributes, constructors, etc. For correct code, the only thing that should require a change is that custom error metaclasses must now inherit from Moose::Error::Default.
Earlier versions of is_subtype_of would incorrectly return true when called with itself, its own TC name or its class name as an argument. (i.e. $foo_tc->is_subtype_of('Foo') == 1) This behavior was a caused by isa
being checked before the class name. The old behavior can be accessed with is_type_of
Earlier versions of Moose::Meta::Attribute::Native::Trait::Code created read-only accessors for the attributes it's been applied to, even if you didn't ask for it with is => 'ro'
. This incorrect behaviour has now been fixed.
add_method_modifier (and subsequently the sugar functions Moose::before, Moose::after, and Moose::around) can now accept arrayrefs, with the same behavior as lists. Types other than arrayref and regexp result in an error.
The apply_metaclass_roles
function is now called apply_metaroles
. The way arguments are supplied has been changed to force you to distinguish between metaroles applied to Moose::Meta::Class (and helpers) versus Moose::Meta::Role.
The old API still works, but will warn in a future release, and eventually be removed.
The attributes returned by Moose::Meta::Role are now instances of the Moose::Meta::Role::Attribute class, instead of bare hash references.
blessed
and confess
Moose is now smart enough to know exactly what it exported, even when it re-exports functions from other packages. When you unimport Moose, it will remove these functions from your namespace unless you also imported them directly from their respective packages.
If you have a no Moose
in your code before you call blessed
or confess
, your code will break. You can either move the no Moose
call later in your code, or explicitly import the relevant functions from the packages that provide them.
The change above comes from a general improvement to Moose::Exporter. It will now unimport any function it exports, even if that function is a re-export from another package.
Previously, this worked more or less accidentally, because role attributes weren't objects. This was never documented, but a few MooseX modules took advantage of this.
This was done to make it possible for roles to alter the the list of composition class roles by applying a method modifiers. Previously, this was an attribute and MooseX modules override it. Since that no longer works, this was made a method.
This should be an attribute, so this may switch back to being an attribute in the future if we can figure out how to make this work.
We decided to undeprecate this. Now it just works.
get_method_map
and get_attribute_map
is deprecatedThese metaclass methods were never meant to be public, and they are both now deprecated. The work around if you still need the functionality they provided is to iterate over the list of names manually.
my %fields = map { $_ => $meta->get_attribute($_) } $meta->get_attribute_list;
This was actually a change in Class::MOP, but this version of Moose requires a version of Class::MOP that includes said change.
See Moose::Meta::Attribute::Native::Trait::Code for details.
Moose has long supported this, but it's never really been documented, and we don't think this is a good practice. If you want to construct an object from an existing object, you should provide some sort of alternate constructor like $object->clone
.
Calling $object->new
now issues a warning, and will be an error in a future release.
make_immutable
for a class with mutable ancestorsWhile in theory this is a good thing to warn about, we found so many exceptions to this that doing this properly became quite problematic.
In particular, we now have reduce
, shuffle
, uniq
, and natatime
.
Use with_meta
instead. The with_caller
option will start warning in a future release.
make_immutable
for a class with mutable ancestorsThis is dangerous because modifying a class after a subclass has been immutabilized will lead to incorrect results in the subclass, due to inlining, caching, etc. This occasionally happens accidentally, when a class loads one of its subclasses in the middle of its class definition, so pointing out that this may cause issues should be helpful. Metaclasses (classes that inherit from Class::MOP::Object) are currently exempt from this check, since at the moment we aren't very consistent about which metaclasses we immutabilize.
enum
and duck_type
now take arrayrefs for all formsPreviously, calling these functions with a list would take the first element of the list as the type constraint name, and use the remainder as the enum values or method names. This makes the interface inconsistent with the anon-type forms of these functions (which must take an arrayref), and a free-form list where the first value is sometimes special is hard to validate (and harder to give reasonable error messages for). These functions have been changed to take arrayrefs in all their forms - so, enum 'My::Type' => [qw(foo bar)]
is now the preferred way to create an enum type constraint. The old syntax still works for now, but it will hopefully be deprecated and removed in a future release.
Moose::Meta::Attribute::Native has been moved into the Moose core from MooseX::AttributeHelpers. Major changes include:
traits
, not metaclass
Method providers are only available via traits.
handles
, not provides
or curries
The provides
syntax was like core Moose handles => HASHREF
syntax, but with the keys and values reversed. This was confusing, and AttributeHelpers now uses handles => HASHREF
in a way that should be intuitive to anyone already familiar with how it is used for other attributes.
The curries
functionality provided by AttributeHelpers has been generalized to apply to all cases of handles => HASHREF
, though not every piece of functionality has been ported (currying with a CODEREF is not supported).
empty
is now is_empty
, and means empty, not non-emptyPreviously, the empty
method provided by Arrays and Hashes returned true if the attribute was not empty (no elements). Now it returns true if the attribute is empty. It was also renamed to is_empty
, to reflect this.
find
was renamed to first
, and first
and last
were removedList::Util refers to the functionality that we used to provide under find
as first, so that will likely be more familiar (and will fit in better if we decide to add more List::Util functions). first
and last
were removed, since their functionality is easily duplicated with curries of get
.
$_
Subroutines passed as the first argument to first
, map
, and grep
now receive their argument in $_
rather than as a parameter to the subroutine. Helpers that take a coderef of two or more arguments remain using the argument list (there are technical limitations to using $a
and $b
like sort
does).
See Moose::Meta::Attribute::Native for the new documentation.
The alias
and excludes
role parameters have been renamed to -alias
and -excludes
. The old names still work, but new code should use the new names, and eventually the old ones will be deprecated and removed.
use Moose -metaclass => 'Foo'
now does alias resolution, just like -traits
(and the metaclass
and traits
options to has
).
Added two functions meta_class_alias
and meta_attribute_alias
to Moose::Util, to simplify aliasing metaclasses and metatraits. This is a wrapper around the old
package Moose::Meta::Class::Custom::Trait::FooTrait; sub register_implementation { 'My::Meta::Trait' }
way of doing this.
When an attribute generates no accessors, we now warn. This is to help users who forget the is
option. If you really do not want any accessors, you can use is => 'bare'
. You can maintain back compat with older versions of Moose by using something like:
($Moose::VERSION >= 0.84 ? is => 'bare' : ())
When an accessor overwrites an existing method, we now warn. To work around this warning (if you really must have this behavior), you can explicitly remove the method before creating it as an accessor:
sub foo {} __PACKAGE__->meta->remove_method('foo'); has foo => ( is => 'ro', );
When an unknown option is passed to has
, we now warn. You can silence the warning by fixing your code. :)
The Role
type has been deprecated. On its own, it was useless, since it just checked $object->can('does')
. If you were using it as a parent type, just call role_type('Role::Name')
to create an appropriate type instead.
use Moose::Exporter;
now imports strict
and warnings
into packages that use it.
DEMOLISHALL
and DEMOLISH
now receive an argument indicating whether or not we are in global destruction.
Type constraints no longer run coercions for a value that already matches the constraint. This may affect some (arguably buggy) edge case coercions that rely on side effects in the via
clause.
Moose::Exporter now accepts the -metaclass
option for easily overriding the metaclass (without metaclass). This works for classes and roles.
Added a duck_type
sugar function to Moose::Util::TypeConstraints to make integration with non-Moose classes easier. It simply checks if $obj->can()
a list of methods.
A number of methods (mostly inherited from Class::MOP) have been renamed with a leading underscore to indicate their internal-ness. The old method names will still work for a while, but will warn that the method has been renamed. In a few cases, the method will be removed entirely in the future. This may affect MooseX authors who were using these methods.
Calling subtype
with a name as the only argument now throws an exception. If you want an anonymous subtype do:
my $subtype = subtype as 'Foo';
This is related to the changes in version 0.71_01.
The is_needed
method in Moose::Meta::Method::Destructor is now only usable as a class method. Previously, it worked as a class or object method, with a different internal implementation for each version.
The internals of making a class immutable changed a lot in Class::MOP 0.78_02, and Moose's internals have changed along with it. The external $metaclass->make_immutable
method still works the same way.
A mutable class accepted Foo->new(undef)
without complaint, while an immutable class would blow up with an unhelpful error. Now, in both cases we throw a helpful error instead.
This "feature" was originally added to allow for cases such as this:
my $args; if ( something() ) { $args = {...}; } return My::Class->new($args);
But we decided this is a bad idea and a little too magical, because it can easily mask real errors.
Calling type
or subtype
without the sugar helpers (as
, where
, message
) is now deprecated.
As a side effect, this meant we ended up using Perl prototypes on as
, and code like this will no longer work:
use Moose::Util::TypeConstraints; use Declare::Constraints::Simple -All; subtype 'ArrayOfInts' => as 'ArrayRef' => IsArrayRef(IsInt);
Instead it must be changed to this:
subtype( 'ArrayOfInts' => { as => 'ArrayRef', where => IsArrayRef(IsInt) } );
If you want to maintain backwards compat with older versions of Moose, you must explicitly test Moose's VERSION
:
if ( Moose->VERSION < 0.71_01 ) { subtype 'ArrayOfInts' => as 'ArrayRef' => IsArrayRef(IsInt); } else { subtype( 'ArrayOfInts' => { as => 'ArrayRef', where => IsArrayRef(IsInt) } ); }
We no longer pass the meta-attribute object as a final argument to triggers. This actually changed for inlined code a while back, but the non-inlined version and the docs were still out of date.
If by some chance you actually used this feature, the workaround is simple. You fetch the attribute object from out of the $self
that is passed as the first argument to trigger, like so:
has 'foo' => ( is => 'ro', isa => 'Any', trigger => sub { my ( $self, $value ) = @_; my $attr = $self->meta->find_attribute_by_name('foo'); # ... } );
If you created a subtype and passed a parent that Moose didn't know about, it simply ignored the parent. Now it automatically creates the parent as a class type. This may not be what you want, but is less broken than before.
You could declare a name with subtype such as "Foo!Bar". Moose would accept this allowed, but if you used it in a parameterized type such as "ArrayRef[Foo!Bar]" it wouldn't work. We now do some vetting on names created via the sugar functions, so that they can only contain alphanumerics, ":", and ".".
Methods created via an attribute can now fulfill a requires
declaration for a role. Honestly we don't know why Stevan didn't make this work originally, he was just insane or something.
Stack traces from inlined code will now report the line and file as being in your class, as opposed to in Moose guts.
When a class does not provide all of a role's required methods, the error thrown now mentions all of the missing methods, as opposed to just the first missing method.
Moose will no longer inline a constructor for your class unless it inherits its constructor from Moose::Object, and will warn when it doesn't inline. If you want to force inlining anyway, pass replace_constructor => 1
to make_immutable
.
If you want to get rid of the warning, pass inline_constructor => 0
.
Removed the (deprecated) make_immutable
keyword.
Removing an attribute from a class now also removes delegation (handles
) methods installed for that attribute. This is correct behavior, but if you were wrongly relying on it you might get bit.
Roles now add methods by calling add_method
, not alias_method
. They make sure to always provide a method object, which will be cloned internally. This means that it is now possible to track the source of a method provided by a role, and even follow its history through intermediate roles. This means that methods added by a role now show up when looking at a class's method list/map.
Parameter and Union args are now sorted, this makes Int|Str the same constraint as Str|Int. Also, incoming type constraint strings are normalized to remove all whitespace differences. This is mostly for internals and should not affect outside code.
Moose::Exporter will no longer remove a subroutine that the exporting package re-exports. Moose re-exports the Carp::confess function, among others. The reasoning is that we cannot know whether you have also explicitly imported those functions for your own use, so we err on the safe side and always keep them.
Moose::init_meta
should now be called as a method.
New modules for extension writers, Moose::Exporter and Moose::Util::MetaRole.
Implemented metaclass traits (and wrote a recipe for it):
use Moose -traits => 'Foo'
This should make writing small Moose extensions a little easier.
Fixed coerce
to accept anon types just like subtype
can. So that you can do:
coerce $some_anon_type => from 'Str' => via { ... };
Added BUILDARGS
, a new step in Moose::Object->new()
.
Fixed how the is => (ro|rw)
works with custom defined reader
, writer
and accessor
options. See the below table for details:
is => ro, writer => _foo # turns into (reader => foo, writer => _foo) is => rw, writer => _foo # turns into (reader => foo, writer => _foo) is => rw, accessor => _foo # turns into (accessor => _foo) is => ro, accessor => _foo # error, accesor is rw
The before/around/after
method modifiers now support regexp matching of method names. NOTE: this only works for classes, it is currently not supported in roles, but, ... patches welcome.
The has
keyword for roles now accepts the same array ref form that Moose.pm does for classes.
A trigger on a read-only attribute is no longer an error, as it's useful to trigger off of the constructor.
Subtypes of parameterizable types now are parameterizable types themselves.
Fixed issue where DEMOLISHALL
was eating the value in $@
, and so not working correctly. It still kind of eats them, but so does vanilla perl.
Inherited attributes may now be extended without restriction on the type ('isa', 'does').
The entire set of Moose::Meta::TypeConstraint::* classes were refactored in this release. If you were relying on their internals you should test your code carefully.
Documenting the use of '+name' with attributes that come from recently composed roles. It makes sense, people are using it, and so why not just officially support it.
The Moose::Meta::Class->create
method now supports roles.
It is now possible to make anonymous enum types by passing enum
an array reference instead of the enum $name => @values
.
Added the make_immutable
keyword as a shortcut to calling make_immutable
on the meta object. This eventually got removed!
Made init_arg => undef
work in Moose. This means "do not accept a constructor parameter for this attribute".
Type errors now use the provided message. Prior to this release they didn't.
Moose is now a postmodern object system :)
The Role system was completely refactored. It is 100% backwards compat, but the internals were totally changed. If you relied on the internals then you are advised to test carefully.
Added method exclusion and aliasing for Roles in this release.
Added the Moose::Util::TypeConstraints::OptimizedConstraints module.
Passing a list of values to an accessor (which is only expecting one value) used to be silently ignored, now it throws an error.
Added parameterized types and did a pretty heavy refactoring of the type constraint system.
Better framework extensibility and better support for "making your own Moose".
Honestly, you shouldn't be using versions of Moose that are this old, so many bug fixes and speed improvements have been made you would be crazy to not upgrade.
Also, I am tired of going through the Changelog so I am stopping here, if anyone would like to continue this please feel free.
Stevan Little <stevan@iinteractive.com>
This software is copyright (c) 2011 by Infinity Interactive, Inc..
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.