If you read this file _as_is_, just ignore the funny characters you
see. It is written in the POD format (see pod/perlpod.pod) which is
specially designed to be readable as is.
=head1 NAME
perlwin32 - Perl under Win32
=head1 SYNOPSIS
These are instructions for building Perl under Windows (9x, NT and
2000).
=head1 DESCRIPTION
Before you start, you should glance through the README file
found in the top-level directory where the Perl distribution
was extracted. Make sure you read and understand the terms under
which this software is being distributed.
Also make sure you read L<BUGS AND CAVEATS> below for the
known limitations of this port.
The INSTALL file in the perl top-level has much information that is
only relevant to people building Perl on Unix-like systems. In
particular, you can safely ignore any information that talks about
"Configure".
You may also want to look at two other options for building
a perl that will work on Windows NT: the README.cygwin and
README.os2 files, which each give a different set of rules to build
a Perl that will work on Win32 platforms. Those two methods will
probably enable you to build a more Unix-compatible perl, but you
will also need to download and use various other build-time and
run-time support software described in those files.
This set of instructions is meant to describe a so-called "native"
port of Perl to Win32 platforms. The resulting Perl requires no
additional software to run (other than what came with your operating
system). Currently, this port is capable of using one of the
following compilers:
Borland C++ version 5.02 or later
Microsoft Visual C++ version 4.2 or later
Mingw32 with GCC version 2.95.2 or better
The last of these is a high quality freeware compiler. Support
for it is still experimental. (Older versions of GCC are known
not to work.)
This port currently supports MakeMaker (the set of modules that
is used to build extensions to perl). Therefore, you should be
able to build and install most extensions found in the CPAN sites.
See L<Usage Hints> below for general hints about this.
=head2 Setting Up
=over 4
=item Make
You need a "make" program to build the sources. If you are using
Visual C++ under Windows NT or 2000, nmake will work. All other
builds need dmake.
dmake is a freely available make that has very nice macro features
and parallelability.
A port of dmake for Windows is available from:
http://www.cpan.org/authors/id/GSAR/dmake-4.1pl1-win32.zip
(This is a fixed version of original dmake sources obtained from
http://www.wticorp.com/dmake/. As of version 4.1PL1, the original
sources did not build as shipped, and had various other problems.
A patch is included in the above fixed version.)
Fetch and install dmake somewhere on your path (follow the instructions
in the README.NOW file).
=item Command Shell
Use the default "cmd" shell that comes with NT. Some versions of the
popular 4DOS/NT shell have incompatibilities that may cause you trouble.
If the build fails under that shell, try building again with the cmd
shell.
The nmake Makefile also has known incompatibilites with the
"command.com" shell that comes with Windows 9x. You will need to
use dmake and makefile.mk to build under Windows 9x.
The surest way to build it is on Windows NT, using the cmd shell.
Make sure the path to the build directory does not contain spaces. The
build usually works in this circumstance, but some tests will fail.
=item Borland C++
If you are using the Borland compiler, you will need dmake.
(The make that Borland supplies is seriously crippled, and will not
work for MakeMaker builds.)
See L/"Make"> above.
=item Microsoft Visual C++
The nmake that comes with Visual C++ will suffice for building.
You will need to run the VCVARS32.BAT file usually found somewhere
like C:\MSDEV4.2\BIN. This will set your build environment.
You can also use dmake to build using Visual C++, provided:
you set OSRELEASE to "microsft" (or whatever the directory name
under which the Visual C dmake configuration lives) in your environment,
and edit win32/config.vc to change "make=nmake" into "make=dmake". The
latter step is only essential if you want to use dmake as your default
make for building extensions using MakeMaker.
=item Mingw32 with GCC
GCC-2.95.2 binaries can be downloaded from:
ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/mingw32/
The GCC-2.95.2 bundle comes with Mingw32 libraries and headers.
Make sure you install the binaries that work with MSVCRT.DLL as indicated
in the README for the GCC bundle. You may need to set up a few environment
variables (usually run from a batch file).
You also need dmake. See L</"Make"> above on how to get it.
=back
=head2 Building
=over 4
=item *
Make sure you are in the "win32" subdirectory under the perl toplevel.
This directory contains a "Makefile" that will work with
versions of nmake that come with Visual C++, and a dmake "makefile.mk"
that will work for all supported compilers. The defaults in the dmake
makefile are setup to build using the GCC compiler.
=item *
Edit the makefile.mk (or Makefile, if using nmake) and change the values
of INST_DRV and INST_TOP. You can also enable various build
flags. These are explained in the makefiles.
You will have to make sure CCTYPE is set correctly, and CCHOME points
to wherever you installed your compiler.
The default value for CCHOME in the makefiles for Visual C++
may not be correct for some versions. Make sure the default exists
and is valid.
If you have either the source or a library that contains des_fcrypt(),
enable the appropriate option in the makefile. des_fcrypt() is not
bundled with the distribution due to US Government restrictions
on the export of cryptographic software. Nevertheless, this routine
is part of the "libdes" library (written by Eric Young) which is widely
available worldwide, usually along with SSLeay (for example:
"ftp://fractal.mta.ca/pub/crypto/SSLeay/DES/"). Set CRYPT_SRC to the
name of the file that implements des_fcrypt(). Alternatively, if
you have built a library that contains des_fcrypt(), you can set
CRYPT_LIB to point to the library name. The location above contains
many versions of the "libdes" library, all with slightly different
implementations of des_fcrypt(). Older versions have a single,
self-contained file (fcrypt.c) that implements crypt(), so they may be
easier to use. A patch against the fcrypt.c found in libdes-3.06 is
in des_fcrypt.patch.
Perl will also build without des_fcrypt(), but the crypt() builtin will
fail at run time.
Be sure to read the instructions near the top of the makefiles carefully.
=item *
Type "dmake" (or "nmake" if you are using that make).
This should build everything. Specifically, it will create perl.exe,
perl56.dll at the perl toplevel, and various other extension dll's
under the lib\auto directory. If the build fails for any reason, make
sure you have done the previous steps correctly.
=back
=head2 Testing
Type "dmake test" (or "nmake test"). This will run most of the tests from
the testsuite (many tests will be skipped).
No tests should typically fail when running Windows NT 4.0. Under Windows
2000, test 22 in lib/open3.t is known to fail (cause still unknown). Many
tests will fail under Windows 9x due to the inferior command shell.
Some test failures may occur if you use a command shell other than the
native "cmd.exe", or if you are building from a path that contains
spaces. So don't do that.
If you are running the tests from a emacs shell window, you may see
failures in op/stat.t. Run "dmake test-notty" in that case.
If you're using the Borland compiler, you may see a failure in op/taint.t
arising from the inability to find the Borland Runtime DLLs on the system
default path. You will need to copy the DLLs reported by the messages
from where Borland chose to install it, into the Windows system directory
(usually somewhere like C:\WINNT\SYSTEM32), and rerun the test.
Please report any other failures as described under L<BUGS AND CAVEATS>.
=head2 Installation
Type "dmake install" (or "nmake install"). This will put the newly
built perl and the libraries under whatever C<INST_TOP> points to in the
Makefile. It will also install the pod documentation under
C<$INST_TOP\$VERSION\lib\pod> and HTML versions of the same under
C<$INST_TOP\$VERSION\lib\pod\html>. To use the Perl you just installed,
you will need to add two components to your PATH environment variable,
C<$INST_TOP\$VERSION\bin>, and C<$INST_TOP\$VERSION\bin\$ARCHNAME>.
For example:
set PATH c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH%
If you opt to comment out INST_VER and INST_ARCH in the makefiles, the
installation structure is much simpler. In that case, it will be
sufficient to add a single entry to the path, for instance:
set PATH c:\perl\bin;%PATH%
=head2 Usage Hints
=over 4
=item Environment Variables
The installation paths that you set during the build get compiled
into perl, so you don't have to do anything additional to start
using that perl (except add its location to your PATH variable).
If you put extensions in unusual places, you can set PERL5LIB
to a list of paths separated by semicolons where you want perl
to look for libraries. Look for descriptions of other environment
variables you can set in L<perlrun>.
You can also control the shell that perl uses to run system() and
backtick commands via PERL5SHELL. See L<perlrun>.
Perl does not depend on the registry, but it can look up certain default
values if you choose to put them there. Perl attempts to read entries from
C<HKEY_CURRENT_USER\Software\Perl> and C<HKEY_LOCAL_MACHINE\Software\Perl>.
Entries in the former override entries in the latter. One or more of the
following entries (of type REG_SZ or REG_EXPAND_SZ) may be set:
lib-$] version-specific standard library path to add to @INC
lib standard library path to add to @INC
sitelib-$] version-specific site library path to add to @INC
sitelib site library path to add to @INC
vendorlib-$] version-specific vendor library path to add to @INC
vendorlib vendor library path to add to @INC
PERL* fallback for all %ENV lookups that begin with "PERL"
Note the C<$]> in the above is not literal. Substitute whatever version
of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be
separated with semicolons, as usual on win32.
=item File Globbing
By default, perl handles file globbing using the File::Glob extension,
which provides portable globbing.
If you want perl to use globbing that emulates the quirks of DOS
filename conventions, you might want to consider using File::DosGlob
to override the internal glob() implementation. See L<File::DosGlob> for
details.
=item Using perl from the command line
If you are accustomed to using perl from various command-line
shells found in UNIX environments, you will be less than pleased
with what Windows offers by way of a command shell.
The crucial thing to understand about the "cmd" shell (which is
the default on Windows NT) is that it does not do any wildcard
expansions of command-line arguments (so wildcards need not be
quoted). It also provides only rudimentary quoting. The only
(useful) quote character is the double quote ("). It can be used to
protect spaces in arguments and other special characters. The
Windows NT documentation has almost no description of how the
quoting rules are implemented, but here are some general observations
based on experiments: The shell breaks arguments at spaces and
passes them to programs in argc/argv. Doublequotes can be used
to prevent arguments with spaces in them from being split up.
You can put a double quote in an argument by escaping it with
a backslash and enclosing the whole argument within double quotes.
The backslash and the pair of double quotes surrounding the
argument will be stripped by the shell.
The file redirection characters "<", ">", and "|" cannot be quoted
by double quotes (there are probably more such). Single quotes
will protect those three file redirection characters, but the
single quotes don't get stripped by the shell (just to make this
type of quoting completely useless). The caret "^" has also
been observed to behave as a quoting character (and doesn't get
stripped by the shell also).
Here are some examples of usage of the "cmd" shell:
This prints two doublequotes:
perl -e "print '\"\"' "
This does the same:
perl -e "print \"\\\"\\\"\" "
This prints "bar" and writes "foo" to the file "blurch":
perl -e "print 'foo'; print STDERR 'bar'" > blurch
This prints "foo" ("bar" disappears into nowhereland):
perl -e "print 'foo'; print STDERR 'bar'" 2> nul
This prints "bar" and writes "foo" into the file "blurch":
perl -e "print 'foo'; print STDERR 'bar'" 1> blurch
This pipes "foo" to the "less" pager and prints "bar" on the console:
perl -e "print 'foo'; print STDERR 'bar'" | less
This pipes "foo\nbar\n" to the less pager:
perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less
This pipes "foo" to the pager and writes "bar" in the file "blurch":
perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less
Discovering the usefulness of the "command.com" shell on Windows 9x
is left as an exercise to the reader :)
=item Building Extensions
The Comprehensive Perl Archive Network (CPAN) offers a wealth
of extensions, some of which require a C compiler to build.
Look in http://www.cpan.org/ for more information on CPAN.
Note that not all of the extensions available from CPAN may work
in the Win32 environment; you should check the information at
http://testers.cpan.org/ before investing too much effort into
porting modules that don't readily build.
Most extensions (whether they require a C compiler or not) can
be built, tested and installed with the standard mantra:
perl Makefile.PL
$MAKE
$MAKE test
$MAKE install
where $MAKE is whatever 'make' program you have configured perl to
use. Use "perl -V:make" to find out what this is. Some extensions
may not provide a testsuite (so "$MAKE test" may not do anything, or
fail), but most serious ones do.
It is important that you use a supported 'make' program, and
ensure Config.pm knows about it. If you don't have nmake, you can
either get dmake from the location mentioned earlier, or get an
old version of nmake reportedly available from:
ftp://ftp.microsoft.com/Softlib/MSLFILES/nmake15.exe
Another option is to use the make written in Perl, available from
CPAN:
http://www.cpan.org/authors/id/NI-S/Make-0.03.tar.gz
You may also use dmake. See L</"Make"> above on how to get it.
Note that MakeMaker actually emits makefiles with different syntax
depending on what 'make' it thinks you are using. Therefore, it is
important that one of the following values appears in Config.pm:
make='nmake' # MakeMaker emits nmake syntax
make='dmake' # MakeMaker emits dmake syntax
any other value # MakeMaker emits generic make syntax
(e.g GNU make, or Perl make)
If the value doesn't match the 'make' program you want to use,
edit Config.pm to fix it.
If a module implements XSUBs, you will need one of the supported
C compilers. You must make sure you have set up the environment for
the compiler for command-line compilation.
If a module does not build for some reason, look carefully for
why it failed, and report problems to the module author. If
it looks like the extension building support is at fault, report
that with full details of how the build failed using the perlbug
utility.
=item Command-line Wildcard Expansion
The default command shells on DOS descendant operating systems (such
as they are) usually do not expand wildcard arguments supplied to
programs. They consider it the application's job to handle that.
This is commonly achieved by linking the application (in our case,
perl) with startup code that the C runtime libraries usually provide.
However, doing that results in incompatible perl versions (since the
behavior of the argv expansion code differs depending on the
compiler, and it is even buggy on some compilers). Besides, it may
be a source of frustration if you use such a perl binary with an
alternate shell that *does* expand wildcards.
Instead, the following solution works rather well. The nice things
about it: 1) you can start using it right away 2) it is more powerful,
because it will do the right thing with a pattern like */*/*.c
3) you can decide whether you do/don't want to use it 4) you can
extend the method to add any customizations (or even entirely
different kinds of wildcard expansion).
C:\> copy con c:\perl\lib\Wild.pm
# Wild.pm - emulate shell @ARGV expansion on shells that don't
use File::DosGlob;
@ARGV = map {
my @g = File::DosGlob::glob($_) if /[*?]/;
@g ? @g : $_;
} @ARGV;
1;
^Z
C:\> set PERL5OPT=-MWild
C:\> perl -le "for (@ARGV) { print }" */*/perl*.c
p4view/perl/perl.c
p4view/perl/perlio.c
p4view/perl/perly.c
perl5.005/win32/perlglob.c
perl5.005/win32/perllib.c
perl5.005/win32/perlglob.c
perl5.005/win32/perllib.c
perl5.005/win32/perlglob.c
perl5.005/win32/perllib.c
Note there are two distinct steps there: 1) You'll have to create
Wild.pm and put it in your perl lib directory. 2) You'll need to
set the PERL5OPT environment variable. If you want argv expansion
to be the default, just set PERL5OPT in your default startup
environment.
If you are using the Visual C compiler, you can get the C runtime's
command line wildcard expansion built into perl binary. The resulting
binary will always expand unquoted command lines, which may not be
what you want if you use a shell that does that for you. The expansion
done is also somewhat less powerful than the approach suggested above.
=item Win32 Specific Extensions
A number of extensions specific to the Win32 platform are available
from CPAN. You may find that many of these extensions are meant to
be used under the Activeware port of Perl, which used to be the only
native port for the Win32 platform. Since the Activeware port does not
have adequate support for Perl's extension building tools, these
extensions typically do not support those tools either, and therefore
cannot be built using the generic steps shown in the previous section.
To ensure smooth transitioning of existing code that uses the
ActiveState port, there is a bundle of Win32 extensions that contains
all of the ActiveState extensions and most other Win32 extensions from
CPAN in source form, along with many added bugfixes, and with MakeMaker
support. This bundle is available at:
http://www.cpan.org/authors/id/GSAR/libwin32-0.151.zip
See the README in that distribution for building and installation
instructions. Look for later versions that may be available at the
same location.
=item Running Perl Scripts
Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to
indicate to the OS that it should execute the file using perl.
Win32 has no comparable means to indicate arbitrary files are
executables.
Instead, all available methods to execute plain text files on
Win32 rely on the file "extension". There are three methods
to use this to execute perl scripts:
=over 8
=item 1
There is a facility called "file extension associations" that will
work in Windows NT 4.0. This can be manipulated via the two
commands "assoc" and "ftype" that come standard with Windows NT
4.0. Type "ftype /?" for a complete example of how to set this
up for perl scripts (Say what? You thought Windows NT wasn't
perl-ready? :).
=item 2
Since file associations don't work everywhere, and there are
reportedly bugs with file associations where it does work, the
old method of wrapping the perl script to make it look like a
regular batch file to the OS, may be used. The install process
makes available the "pl2bat.bat" script which can be used to wrap
perl scripts into batch files. For example:
pl2bat foo.pl
will create the file "FOO.BAT". Note "pl2bat" strips any
.pl suffix and adds a .bat suffix to the generated file.
If you use the 4DOS/NT or similar command shell, note that
"pl2bat" uses the "%*" variable in the generated batch file to
refer to all the command line arguments, so you may need to make
sure that construct works in batch files. As of this writing,
4DOS/NT users will need a "ParameterChar = *" statement in their
4NT.INI file, or will need to execute "setdos /p*" in the 4DOS/NT
startup file to enable this to work.
=item 3
Using "pl2bat" has a few problems: the file name gets changed,
so scripts that rely on C<$0> to find what they must do may not
run properly; running "pl2bat" replicates the contents of the
original script, and so this process can be maintenance intensive
if the originals get updated often. A different approach that
avoids both problems is possible.
A script called "runperl.bat" is available that can be copied
to any filename (along with the .bat suffix). For example,
if you call it "foo.bat", it will run the file "foo" when it is
executed. Since you can run batch files on Win32 platforms simply
by typing the name (without the extension), this effectively
runs the file "foo", when you type either "foo" or "foo.bat".
With this method, "foo.bat" can even be in a different location
than the file "foo", as long as "foo" is available somewhere on
the PATH. If your scripts are on a filesystem that allows symbolic
links, you can even avoid copying "runperl.bat".
Here's a diversion: copy "runperl.bat" to "runperl", and type
"runperl". Explain the observed behavior, or lack thereof. :)
Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH
=back
=item Miscellaneous Things
A full set of HTML documentation is installed, so you should be
able to use it if you have a web browser installed on your
system.
C<perldoc> is also a useful tool for browsing information contained
in the documentation, especially in conjunction with a pager
like C<less> (recent versions of which have Win32 support). You may
have to set the PAGER environment variable to use a specific pager.
"perldoc -f foo" will print information about the perl operator
"foo".
If you find bugs in perl, you can run C<perlbug> to create a
bug report (you may have to send it manually if C<perlbug> cannot
find a mailer on your system).
=back
=head1 BUGS AND CAVEATS
Some of the built-in functions do not act exactly as documented in
L<perlfunc>, and a few are not implemented at all. To avoid
surprises, particularly if you have had prior exposure to Perl
in other operating environments or if you intend to write code
that will be portable to other environments, see L<perlport>
for a reasonably definitive list of these differences.
Not all extensions available from CPAN may build or work properly
in the Win32 environment. See L</"Building Extensions">.
Most C<socket()> related calls are supported, but they may not
behave as on Unix platforms. See L<perlport> for the full list.
Signal handling may not behave as on Unix platforms (where it
doesn't exactly "behave", either :). For instance, calling C<die()>
or C<exit()> from signal handlers will cause an exception, since most
implementations of C<signal()> on Win32 are severely crippled.
Thus, signals may work only for simple things like setting a flag
variable in the handler. Using signals under this port should
currently be considered unsupported.
Please send detailed descriptions of any problems and solutions that
you may find to <F<perlbug@perl.com>>, along with the output produced
by C<perl -V>.
=head1 AUTHORS
=over 4
Gary Ng E<lt>71564.1743@CompuServe.COME<gt>
Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>
Nick Ing-Simmons E<lt>nick@ni-s.u-net.comE<gt>
=back
This document is maintained by Gurusamy Sarathy.
=head1 SEE ALSO
L<perl>
=head1 HISTORY
This port was originally contributed by Gary Ng around 5.003_24,
and borrowed from the Hip Communications port that was available
at the time. Various people have made numerous and sundry hacks
since then.
Borland support was added in 5.004_01 (Gurusamy Sarathy).
GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons).
Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp).
Support for fork() emulation was added in 5.6 (ActiveState Tool Corp).
Win9x support was added in 5.6 (Benjamin Stuhl).
Last updated: 22 March 2000
=cut