Paws::DirectConnect - Perl Interface to AWS AWS Direct Connect
use Paws; my $obj = Paws->service('DirectConnect'); my $res = $obj->Method( Arg1 => $val1, Arg2 => [ 'V1', 'V2' ], # if Arg3 is an object, the HashRef will be used as arguments to the constructor # of the arguments type Arg3 => { Att1 => 'Val1' }, # if Arg4 is an array of objects, the HashRefs will be passed as arguments to # the constructor of the arguments type Arg4 => [ { Att1 => 'Val1' }, { Att1 => 'Val2' } ], );
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1 gigabit or 10 gigabit Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. With this connection in place, you can create virtual interfaces directly to the AWS cloud (for example, to Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3)) and to Amazon Virtual Private Cloud (Amazon VPC), bypassing Internet service providers in your network path. An AWS Direct Connect location provides access to AWS in the region it is associated with, as well as access to other US regions. For example, you can provision a single connection to any AWS Direct Connect location in the US and use it to access public AWS services in all US Regions and AWS GovCloud (US).
Each argument is described in detail in: Paws::DirectConnect::AllocateConnectionOnInterconnect
Returns: a Paws::DirectConnect::Connection instance
Deprecated in favor of AllocateHostedConnection.
Creates a hosted connection on an interconnect.
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect.
This is intended for use by AWS Direct Connect partners only.
Each argument is described in detail in: Paws::DirectConnect::AllocateHostedConnection
Creates a hosted connection on an interconnect or a link aggregation group (LAG).
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect or LAG.
Each argument is described in detail in: Paws::DirectConnect::AllocatePrivateVirtualInterface
Returns: a Paws::DirectConnect::VirtualInterface instance
Provisions a private virtual interface to be owned by another AWS customer.
Virtual interfaces created using this action must be confirmed by the virtual interface owner by using the ConfirmPrivateVirtualInterface action. Until then, the virtual interface will be in 'Confirming' state, and will not be available for handling traffic.
Each argument is described in detail in: Paws::DirectConnect::AllocatePublicVirtualInterface
Provisions a public virtual interface to be owned by a different customer.
The owner of a connection calls this function to provision a public virtual interface which will be owned by another AWS customer.
Virtual interfaces created using this function must be confirmed by the virtual interface owner by calling ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface will be in 'Confirming' state, and will not be available for handling traffic.
When creating an IPv6 public virtual interface (addressFamily is 'ipv6'), the customer and amazon address fields should be left blank to use auto-assigned IPv6 space. Custom IPv6 Addresses are currently not supported.
Each argument is described in detail in: Paws::DirectConnect::AssociateConnectionWithLag
Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to AWS will be interrupted). The connection must be hosted on the same AWS Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can reassociate a connection that's currently associated with a different LAG; however, if removing the connection will cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
Virtual interfaces that are directly associated with the connection are not automatically migrated. You can delete them or associate them with the target LAG using AssociateVirtualInterface. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
For interconnects, hosted connections are not automatically migrated. You can delete them, or the owner of the physical connection can associate them with the target LAG using AssociateHostedConnection. After all hosted connections have been migrated, the interconnect can be migrated into the LAG. If the interconnect is already associated with a LAG, the hosted connections remain associated with the original LAG.
Each argument is described in detail in: Paws::DirectConnect::AssociateHostedConnection
Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to AWS as it is being migrated.
Each argument is described in detail in: Paws::DirectConnect::AssociateVirtualInterface
Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to AWS is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.
Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.
Hosted virtual interfaces (an interface for which the owner of the connection is not the owner of physical connection) can only be reassociated by the owner of the physical connection.
Each argument is described in detail in: Paws::DirectConnect::ConfirmConnection
Returns: a Paws::DirectConnect::ConfirmConnectionResponse instance
Confirm the creation of a hosted connection on an interconnect.
Upon creation, the hosted connection is initially in the 'Ordering' state, and will remain in this state until the owner calls ConfirmConnection to confirm creation of the hosted connection.
Each argument is described in detail in: Paws::DirectConnect::ConfirmPrivateVirtualInterface
Returns: a Paws::DirectConnect::ConfirmPrivateVirtualInterfaceResponse instance
Accept ownership of a private virtual interface created by another customer.
After the virtual interface owner calls this function, the virtual interface will be created and attached to the given virtual private gateway, and will be available for handling traffic.
Each argument is described in detail in: Paws::DirectConnect::ConfirmPublicVirtualInterface
Returns: a Paws::DirectConnect::ConfirmPublicVirtualInterfaceResponse instance
Accept ownership of a public virtual interface created by another customer.
After the virtual interface owner calls this function, the specified virtual interface will be created and made available for handling traffic.
Each argument is described in detail in: Paws::DirectConnect::CreateBGPPeer
Returns: a Paws::DirectConnect::CreateBGPPeerResponse instance
Creates a new BGP peer on a specified virtual interface. The BGP peer cannot be in the same address family (IPv4/IPv6) of an existing BGP peer on the virtual interface.
You must create a BGP peer for the corresponding address family in order to access AWS resources that also use that address family.
When creating a IPv6 BGP peer, the Amazon address and customer address fields must be left blank. IPv6 addresses are automatically assigned from Amazon's pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
For a public virtual interface, the Autonomous System Number (ASN) must be private or already whitelisted for the virtual interface.
Each argument is described in detail in: Paws::DirectConnect::CreateConnection
Creates a new connection between the customer network and a specific AWS Direct Connect location.
A connection links your internal network to an AWS Direct Connect location over a standard 1 gigabit or 10 gigabit Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. An AWS Direct Connect location provides access to Amazon Web Services in the region it is associated with. You can establish connections with AWS Direct Connect locations in multiple regions, but a connection in one region does not provide connectivity to other regions.
You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection will be created.
Each argument is described in detail in: Paws::DirectConnect::CreateInterconnect
Returns: a Paws::DirectConnect::Interconnect instance
Creates a new interconnect between a AWS Direct Connect partner's network and a specific AWS Direct Connect location.
An interconnect is a connection which is capable of hosting other connections. The AWS Direct Connect partner can use an interconnect to provide sub-1Gbps AWS Direct Connect service to tier 2 customers who do not have their own connections. Like a standard connection, an interconnect links the AWS Direct Connect partner's network to an AWS Direct Connect location over a standard 1 Gbps or 10 Gbps Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an AWS Direct Connect router.
You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect will be created.
For each end customer, the AWS Direct Connect partner provisions a connection on their interconnect by calling AllocateConnectionOnInterconnect. The end customer can then connect to AWS resources by creating a virtual interface on their connection, using the VLAN assigned to them by the AWS Direct Connect partner.
Each argument is described in detail in: Paws::DirectConnect::CreateLag
Returns: a Paws::DirectConnect::Lag instance
Creates a new link aggregation group (LAG) with the specified number of bundled physical connections between the customer network and a specific AWS Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple 1 gigabit or 10 gigabit interfaces, allowing you to treat them as a single interface.
All connections in a LAG must use the same bandwidth (for example, 10 Gbps), and must terminate at the same AWS Direct Connect endpoint.
You can have up to 10 connections per LAG. Regardless of this limit, if you request more connections for the LAG than AWS Direct Connect can allocate on a single endpoint, no LAG is created.
You can specify an existing physical connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical connection or hosted connections, and re-establishes them as a member of the LAG. The LAG will be created on the same AWS Direct Connect endpoint to which the connection terminates. Any virtual interfaces associated with the connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.
If the AWS account used to create a LAG is a registered AWS Direct Connect partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.
Each argument is described in detail in: Paws::DirectConnect::CreatePrivateVirtualInterface
Creates a new private virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A private virtual interface supports sending traffic to a single virtual private cloud (VPC).
Each argument is described in detail in: Paws::DirectConnect::CreatePublicVirtualInterface
Creates a new public virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A public virtual interface supports sending traffic to public services of AWS such as Amazon Simple Storage Service (Amazon S3).
Each argument is described in detail in: Paws::DirectConnect::DeleteBGPPeer
Returns: a Paws::DirectConnect::DeleteBGPPeerResponse instance
Deletes a BGP peer on the specified virtual interface that matches the specified customer address and ASN. You cannot delete the last BGP peer from a virtual interface.
Each argument is described in detail in: Paws::DirectConnect::DeleteConnection
Deletes the connection.
Deleting a connection only stops the AWS Direct Connect port hour and data transfer charges. You need to cancel separately with the providers any services or charges for cross-connects or network circuits that connect you to the AWS Direct Connect location.
Each argument is described in detail in: Paws::DirectConnect::DeleteInterconnect
Returns: a Paws::DirectConnect::DeleteInterconnectResponse instance
Deletes the specified interconnect.
Each argument is described in detail in: Paws::DirectConnect::DeleteLag
Deletes a link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.
Each argument is described in detail in: Paws::DirectConnect::DeleteVirtualInterface
Returns: a Paws::DirectConnect::DeleteVirtualInterfaceResponse instance
Deletes a virtual interface.
Each argument is described in detail in: Paws::DirectConnect::DescribeConnectionLoa
Returns: a Paws::DirectConnect::DescribeConnectionLoaResponse instance
Deprecated in favor of DescribeLoa.
Returns the LOA-CFA for a Connection.
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that your APN partner or service provider uses when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations in the AWS Direct Connect user guide.
Each argument is described in detail in: Paws::DirectConnect::DescribeConnections
Returns: a Paws::DirectConnect::Connections instance
Displays all connections in this region.
If a connection ID is provided, the call returns only that particular connection.
Each argument is described in detail in: Paws::DirectConnect::DescribeConnectionsOnInterconnect
Deprecated in favor of DescribeHostedConnections.
Returns a list of connections that have been provisioned on the given interconnect.
Each argument is described in detail in: Paws::DirectConnect::DescribeHostedConnections
Returns a list of hosted connections that have been provisioned on the given interconnect or link aggregation group (LAG).
Each argument is described in detail in: Paws::DirectConnect::DescribeInterconnectLoa
Returns: a Paws::DirectConnect::DescribeInterconnectLoaResponse instance
Returns the LOA-CFA for an Interconnect.
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations in the AWS Direct Connect user guide.
Each argument is described in detail in: Paws::DirectConnect::DescribeInterconnects
Returns: a Paws::DirectConnect::Interconnects instance
Returns a list of interconnects owned by the AWS account.
If an interconnect ID is provided, it will only return this particular interconnect.
Each argument is described in detail in: Paws::DirectConnect::DescribeLags
Returns: a Paws::DirectConnect::Lags instance
Describes the link aggregation groups (LAGs) in your account.
If a LAG ID is provided, only information about the specified LAG is returned.
Each argument is described in detail in: Paws::DirectConnect::DescribeLoa
Returns: a Paws::DirectConnect::Loa instance
Returns the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
Each argument is described in detail in: Paws::DirectConnect::DescribeLocations
Returns: a Paws::DirectConnect::Locations instance
Returns the list of AWS Direct Connect locations in the current AWS region. These are the locations that may be selected when calling CreateConnection or CreateInterconnect.
Each argument is described in detail in: Paws::DirectConnect::DescribeTags
Returns: a Paws::DirectConnect::DescribeTagsResponse instance
Describes the tags associated with the specified Direct Connect resources.
Each argument is described in detail in: Paws::DirectConnect::DescribeVirtualGateways
Returns: a Paws::DirectConnect::VirtualGateways instance
Returns a list of virtual private gateways owned by the AWS account.
You can create one or more AWS Direct Connect private virtual interfaces linking to a virtual private gateway. A virtual private gateway can be managed via Amazon Virtual Private Cloud (VPC) console or the EC2 CreateVpnGateway action.
Each argument is described in detail in: Paws::DirectConnect::DescribeVirtualInterfaces
Returns: a Paws::DirectConnect::VirtualInterfaces instance
Displays all virtual interfaces for an AWS account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
Each argument is described in detail in: Paws::DirectConnect::DisassociateConnectionFromLag
Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an AWS Direct Connect partner is automatically converted to an interconnect.
If disassociating the connection will cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
Each argument is described in detail in: Paws::DirectConnect::TagResource
Returns: a Paws::DirectConnect::TagResourceResponse instance
Adds the specified tags to the specified Direct Connect resource. Each Direct Connect resource can have a maximum of 50 tags.
Each tag consists of a key and an optional value. If a tag with the same key is already associated with the Direct Connect resource, this action updates its value.
Each argument is described in detail in: Paws::DirectConnect::UntagResource
Returns: a Paws::DirectConnect::UntagResourceResponse instance
Removes one or more tags from the specified Direct Connect resource.
Each argument is described in detail in: Paws::DirectConnect::UpdateLag
Updates the attributes of a link aggregation group (LAG).
You can update the following attributes:
The name of the LAG.
The value for the minimum number of connections that must be operational for the LAG itself to be operational.
When you create a LAG, the default value for the minimum number of operational connections is zero (0). If you update this value, and the number of operational connections falls below the specified value, the LAG will automatically go down to avoid overutilization of the remaining connections. Adjusting this value should be done with care as it could force the LAG down if the value is set higher than the current number of operational connections.
Paginator methods are helpers that repetively call methods that return partial results
This service class forms part of Paws
The source code is located here: https://github.com/pplu/aws-sdk-perl
Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues
To install Paws::SDK::Config, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Paws::SDK::Config
CPAN shell
perl -MCPAN -e shell install Paws::SDK::Config
For more information on module installation, please visit the detailed CPAN module installation guide.