labels - print labels and envelopes
labels [options] [file ...]
labels will read the given input file(s) and produce a PostScript file that can be used to print text labels.
The input is considered to contain the text lines that must be printed on the labels. One or more empty lines separate entries.
labels -paper a4 -rows 7 -cols 3 -left 10 -vcenter \ -start 5 -repeat 3 < file > file.ps
This defines the paper size to be A4 (210 x 297 mm). Each sheet has 21 labels, arranged in 7 rows of 3 columns. The text on the labels will start 10 mm from the left edge of the label, and is vertically centered. The first entry printed will occupy label number 5 (top-left label is 1, bottom-right label is 21). Each entry is repeated 3 times.
The layout specification can come from the command line, or (much easier) from a configuration file. For this example, the configuration entry would be:
type 21 paper a4 cols 3 rows 7 left 10 vcenter
The command then only needs to select the desired type, start and repetition:
labels -type 21 -start 5 -repeat 3 < file > file.ps
See below for more details.
This section describes the command line options that do not have a counterpart in the configuration file.
Designates the name of the configuration file to be used.
Includes a layout drawing in the PostScript file to illustrate how the printout will look like.
Select the layout specification labeled XX from the configuration file.
Printing will start at label location NN. This makes it possible to print some labels, peel them off, and continue printing on the same sheet some time later. First label has number 1 (top-left). The last label is the bottom-right one. Default is to start at label 1.
Repeat every entry NN times. Default is once.
Distance between the baselines of the printed text, in PostScript points. Default is 14 points. Deprecated.
Enable / disable processing of dutch KIX codes. This is enabled by default.
Send output to file instead of standard output.
Print using manual feed.
Print a brief help message and exits.
Prints program identification.
More verbose information.
The program looks for a configuration file in one of the following places:
.labels.cfg $HOME/.labels.cfg /usr/local/lib/labels.cfg
The first non-empty file found will be used. A configuration file is optional, unless the -type command line option was used.
Lines starting with
# in the configuration file will be ignored. Leading and trailing whitespace is ignored as well.
The configuration file can contain the following definitions:
fonts plainfont italicfont boldfont bolditalicfont
Alternatively, individual fonts can be set with one of the commands plainfont, italicfont, boldfont and bolditalicfont, each followed by the name of the font. For example:
The default fonts are Times-Roman, Times-Italic, Times-Bold and Times-BoldItalic.
paper a4 210 297
The name of the paper size must be a recognized PostScript paper size, unless it starts with an
_ character. In this case, the page dimensions will be registered in the PostScript output.
Paper sizes `a4' (European A4) and `letter' (US Letter) are predefined.
This will always select the specification labeled 21 unless overridden with a -type command line option.
All specifications can also be given as command line arguments. However, the values in the configuration file override the command line arguments.
This identifies the following specification with the given name.
The paper size for this entry. Default value is `a4'.
This can be portrait, landscape, upsidedown and seascape. Default orientation is `portrait'.
Note that rows, columns and margins are all relative to the selected page orientation.
The number of rows of labels on a sheet. Default is 1 row.
The number of columns on a sheet. Default is 1 column.
The dimensions of the labels are calculated from the paper size and the number of rows and columns. For example, with A4 paper and 7 rows of 3 columns, each label is 70 mm wide and 42.4 mm high.
Optional margin on the top of each sheet. For sheets that are not completely composed of labels.
Optional margin on the bottom of each sheet.
Optional margin on the left of each sheet.
Optional margin on the right of each sheet.
The offset, in millimeters, of the printed text from the left edge of each label. Default value is zero, which is not what you want.
The offset, in millimeters, of the baseline of the first line of printed text from the top edge of each label. Default value is zero, which is probably not what you want unless vcenter is also included in this specification.
The lines of text on the label are vertically centered. If top was specified, the remaining vertical space is used for centering.
Centering is nice for labels, but usually not desired for envelopes.
For non-standard page sizes, for example for envelopes, two approaches are possible.
The first approach is to pretend a common paper size, e.g. `a4', and define margins to reposition the envelope on the paper.
# Envelope A6, landscape, on A4 paper type e6 paper a4 landscape leftmargin 134 bottommargin 97 left 70 top 60
The second approach is to explicitly specify the paper dimensions. Disadvantage is that some PostScript viewers cannot handle this correctly (GhostScript does it okay, GhostView does not).
# Envelope A6, landscape paper _a6l 148.5 105 # width > height implies landscape type xa6 paper _a6l left 70 top 60
The input is considered to be made up of text lines, each of which are printed on the labels. The encoding used is ISO-Latin-1.
A text line that starts with a double slash is printed using an italic font (after removing the slashes). A text line that starts with a double bar is printed using a bold font (after removing the bars). A text line that starts with bar-slash or slash-bar is printed using a bold-italic font (after removing the bar and slash).
In the text, the following substitutions are made:
"are printed as curly quotes.
The program recognises dutch zip codes and will print a KIX barcode under the address if it can distill the KIX code from the address. If this fails, the KIX code can be specified explicitly as the last line of the input. For example, the following two entries produce identical results:
H.J. Hekking Dorpsstraat 5 1234 AB Juinen H.J. Hekking Dorpsstraat 5 1234 AB Juinen 1234AB5
In the second entry, the KIX code was explicitly specified.
The program will issue a warning if it could not determine the KIX code from the address.
KIX code processing can be suppressed with the -nokix command line option.
The generated PostScript output is conformant to Adobe Structuring Conventions version 3.0.
The fonts required for printing are not included in the PostScript output. If you use non-standard PostScript fonts, you will need a print spooler that is capable of providing the necessary fonts to the printer. Alternatively, the font files can be inserted in the PostScript preamble that follows the program text.
There is no protection against text running off the label, if the text is too long.
Fonts and font sizes are hard-wired.
Johan Vromans (firstname.lastname@example.org) wrote the program.
The KIX code font included in the kit is created by Hendrik Jan Thomassen <H.J.Thomassen@ATComputing.nl>.
This program is Copyright 1992,1999 by Squirrel Consultancy. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the terms of either: a) the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version, or b) the "Artistic License" which comes with Perl.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See either the GNU General Public License or the Perl Artistic License for details.