perl5110delta - what is new for perl v5.11.0
This document describes differences between the 5.10.0 release and the 5.11.0 development release.
Previous versions of Perl tried to map POSIX style character class definitions onto Unicode property names so that patterns would "dwim" when matches were made against latin-1 or unicode strings. This proved to be a mistake, breaking character class negation, causing forward compatibility problems (as Unicode keeps updating their property definitions and adding new characters), and other problems.
Therefore we have now defined a new set of artificial "unicode" property names which will be used to do unicode matching of patterns using POSIX style character classes and perl short-form escape character classes like \w and \d.
The key change here is that \d will no longer match every digit in the unicode standard (there are thousands) nor will \w match every word character in the standard, instead they will match precisely their POSIX or Perl definition.
Those needing to match based on Unicode properties can continue to do so by using the \p{} syntax to match whichever property they like, including the new artificial definitions.
NOTE: This is a backwards incompatible no-warning change in behaviour. If you are upgrading and you process large volumes of text look for POSIX and Perl style character classes and change them to the relevent property name (by removing the word 'Posix' from the current name).
The following table maps the POSIX character class names, the escapes and the old and new Unicode property mappings:
POSIX Esc Class New-Property ! Old-Property
----------------------------------------------+-------------
alnum [0-9A-Za-z] IsPosixAlnum ! IsAlnum
alpha [A-Za-z] IsPosixAlpha ! IsAlpha
ascii [\000-\177] IsASCII = IsASCII
blank [\011 ] IsPosixBlank !
cntrl [\0-\37\177] IsPosixCntrl ! IsCntrl
digit \d [0-9] IsPosixDigit ! IsDigit
graph [!-~] IsPosixGraph ! IsGraph
lower [a-z] IsPosixLower ! IsLower
print [ -~] IsPosixPrint ! IsPrint
punct [!-/:-@[-`{-~] IsPosixPunct ! IsPunct
space [\11-\15 ] IsPosixSpace ! IsSpace
\s [\11\12\14\15 ] IsPerlSpace ! IsSpacePerl
upper [A-Z] IsPosixUpper ! IsUpper
word \w [0-9A-Z_a-z] IsPerlWord ! IsWord
xdigit [0-9A-Fa-f] IsXDigit = IsXDigit
If you wish to build perl with the old mapping you may do so by setting
#define PERL_LEGACY_UNICODE_CHARCLASS_MAPPINGS 1
in regcomp.h, and then setting
PERL_TEST_LEGACY_POSIX_CC
to true your enviornment when testing.
In @INC, ARCHLIB and PRIVLIB now occur after after the current version's site_perl and vendor_perl.
The handling of complex expressions by the given/when switch statement has been enhanced. These enhancements are also available in 5.10.1 and subsequent 5.10 releases. There are two new cases where when now interprets its argument as a boolean, instead of an expression to be used in a smart match:
The .. and ... flip-flop operators are now evaluated in boolean context, following their usual semantics; see "Range Operators" in perlop.
Note that, as in perl 5.10.0, when (1..10) will not work to test whether a given value is an integer between 1 and 10; you should use when ([1..10]) instead (note the array reference).
However, contrary to 5.10.0, evaluating the flip-flop operators in boolean context ensures it can now be useful in a when(), notably for implementing bistable conditions, like in:
when (/^=begin/ .. /^=end/) {
# do something
}
A compound expression involving the defined-or operator, as in when (expr1 // expr2), will be treated as boolean if the first expression is boolean. (This just extends the existing rule that applies to the regular or operator, as in when (expr1 || expr2).)
The next section details more changes brought to the semantics to the smart match operator, that naturally also modify the behaviour of the switch statements where smart matching is implicitly used. These changers were also made for the 5.10.1 release, and will remain in subsequent 5.10 releases.
The smart match operator ~~ is no longer commutative. The behaviour of a smart match now depends primarily on the type of its right hand argument. Moreover, its semantics have been adjusted for greater consistency or usefulness in several cases. While the general backwards compatibility is maintained, several changes must be noted:
%hash ~~ sub {} and @array ~~ sub {} now test that the subroutine returns a true value for each key of the hash (or element of the array), instead of passing the whole hash or array as a reference to the subroutine.~~ operator, but like any vulgar scalar.undef ~~ %hash is always false (since undef can't be a key in a hash). No implicit conversion to "" is done (as was the case in perl 5.10.0).$scalar ~~ @array now always distributes the smart match across the elements of the array. It's true if one element in @array verifies $scalar ~~ $element. This is a generalization of the old behaviour that tested whether the array contained the scalar.The full dispatch table for the smart match operator is given in "Smart matching in detail" in perlsyn.
According to the rule of dispatch based on the rightmost argument type, when an object overloading ~~ appears on the right side of the operator, the overload routine will always be called (with a 3rd argument set to a true value, see overload.) However, when the object will appear on the left, the overload routine will be called only when the rightmost argument is a simple scalar. This way distributivity of smart match across arrays is not broken, as well as the other behaviours with complex types (coderefs, hashes, regexes). Thus, writers of overloading routines for smart match mostly need to worry only with comparing against a scalar, and possibly with stringification overloading; the other common cases will be automatically handled consistently.
~~ will now refuse to work on objects that do not overload it (in order to avoid relying on the object's underlying structure). (However, if the object overloads the stringification or the numification operators, and if overload fallback is active, it will be used instead, as usual.)
Labels used as targets for the goto, last, next or redo statements cannot be keywords anymore. This restriction will prevent potential confusion between the goto LABEL and goto EXPR syntaxes: for example, a statement like goto print would jump to a label whose name would be the return value of print(), (usually 1), instead of a label named print. Moreover, the other control flow statements would just ignore any keyword passed to them as a label name. Since such labels cannot be defined anymore, this kind of error will be avoided.
use feature :5.10* have changed slightly. See "Modules and Pragmata" for more information.~~ with an object that has no overload defined for it. (This way ~~ will not break encapsulation by matching against the object's internal representation as a reference.)perl -V. See perlrepository for more information.ext/ directory in the perl source has been reorganised. In general, a module Foo::Bar whose source was stored under ext/Foo/Bar/ is now located under ext/Foo-Bar/. Also, nearly all dual-life modules have been moved from lib/ to ext/. This is purely a source tarball change, and should make no difference to the compilation or installation of perl, unless you have a very customised build process that explicitly relies on this structure, or which hard-codes the nonxs_ext Configure parameter. Specifically, this change does not by default alter the location of any files in the final installation.Test::Harness 2.x to 3.x upgrade, the experimental Test::Harness::Straps module has been removed. See "Updated Modules" for more details.ExtUtils::MakeMaker upgrade, the ExtUtils::MakeMaker::bytes and ExtUtils::MakeMaker::vmsish modules have been removed from this distribution.Module::CoreList no longer contains the %:patchlevel hash.A bugfix related to the handling of the /m modifier and qr resulted in a change of behaviour between 5.8.x and 5.10.0:
# matches in 5.8.x, doesn't match in 5.10.0
$re = qr/^bar/; "foo\nbar" =~ /$re/m;
length undef now returns undef.This allows a build to complete with PERL_UNICODE set and a UTF-8 locale. Without this there's a bootstrapping problem, as miniperl can't load the UTF-8 components of the regexp engine, because they're not yet built.
"#line XXX" directive.foreach may no longer be used as an attribute.The copy of the Unicode Character Database included in Perl 5.11.0 has been updated to 5.1.0 from 5.0.0. See http://www.unicode.org/versions/Unicode5.1.0/#Notable_Changes for the notable changes.
As of Perl 5.11.0 there is a new interface for plugging and using method resolution orders other than the default (linear depth first search). The C3 method resolution order added in 5.10.0 has been re-implemented as a plugin, without changing its Perl-space interface. See perlmroapi for more information.
overloading pragmaThis pragma allows you to lexically disable or enable overloading for some or all operations. (Yuval Kogman)
\N regex escapeA new regex escape has been added, \N. It will match any character that is not a newline, independently from the presence or absence of the single line match modifier /s. (If \N is followed by an opening brace and by a letter, perl will still assume that a Unicode character name is coming, so compatibility is preserved.) (Rafael Garcia-Suarez)
Using the use VERSION syntax with a version number greater or equal to 5.11.0 will also lexically enable strictures just like use strict would do (in addition to enabling features.) So, the following:
use 5.11.0;
will now imply:
use strict;
use feature ':5.11';
The core distribution can now run its regression tests in parallel on Unix-like platforms. Instead of running make test, set TEST_JOBS in your environment to the number of tests to run in parallel, and run make test_harness. On a Bourne-like shell, this can be done as
TEST_JOBS=3 make test_harness # Run 3 tests in parallel
An environment variable is used, rather than parallel make itself, because TAP::Harness needs to be able to schedule individual non-conflicting test scripts itself, and there is no standard interface to make utilities to interact with their job schedulers.
Note that currently some test scripts may fail when run in parallel (most notably ext/IO/t/io_dir.t). If necessary run just the failing scripts again sequentially and see if the failures go away.
... operatorA new operator, ..., nicknamed the Yada Yada operator, has been added. It is intended to mark placeholder code, that is not yet implemented. See "Yada Yada Operator" in perlop. (chromatic)
Some support for DTrace has been added. See "DTrace support" in INSTALL.
configure_requires in CPAN module metadataBoth CPAN and CPANPLUS now support the configure_requires keyword in the META.yml metadata file included in most recent CPAN distributions. This allows distribution authors to specify configuration prerequisites that must be installed before running Makefile.PL or Build.PL.
See the documentation for ExtUtils::MakeMaker or Module::Build for more on how to specify configure_requires when creating a distribution for CPAN.
each is now more flexibleThe each function can now operate on arrays.
Perl's core time-related functions are now Y2038 compliant. (With 29 years to spare!)
$, flexibilityThe variable $, may now be tied.
// now behaves like || in when clauses
You can now set -W from the PERL5OPT environment variable
delete localdelete local now allows you to locally delete a hash entry.
Abstract namespace sockets are Linux-specific socket type that live in AF_UNIX family, slightly abusing it to be able to use arbitrary character arrays as addresses: They start with nul byte and are not terminated by nul byte, but with the length passed to the socket() system call.
Dual-lifed modules maintained primarily in the Perl core now live in dist/. Dual-lifed modules maintained primarily on CPAN now live in cpan/
In previous releases of Perl, it was customary to enumerate all module changes in this section of the perldelta file. From 5.11.0 forward only notable updates (such as new or deprecated modules ) will be listed in this section. For a complete reference to the versions of modules shipped in a given release of perl, please see Module::CoreList.
autodieThis is a new lexically-scoped alternative for the Fatal module. The bundled version is 2.06_01. Note that in this release, using a string eval when autodie is in effect can cause the autodie behaviour to leak into the surrounding scope. See "BUGS" in autodie for more details.
Compress::Raw::Bzip2This has been added to the core (version 2.020).
parentThis pragma establishes an ISA relationship with base classes at compile time. It provides the key feature of base without the feature creep.
Parse::CPAN::MetaThis has been added to the core (version 1.39).
overloadingSee "The overloading pragma" above.
attrsThe attrs pragma has been removed. It had been marked as deprecated since 5.6.0.
charnamesThe Unicode NameAliases.txt database file has been added. This has the effect of adding some extra \N character names that formerly wouldn't have been recognised; for example, "\N{LATIN CAPITAL LETTER GHA}".
featureThe meaning of the :5.10 and :5.10.X feature bundles has changed slightly. The last component, if any (i.e. X) is simply ignored. This is predicated on the assumption that new features will not, in general, be added to maintenance releases. So :5.10 and :5.10.X have identical effect. This is a change to the behaviour documented for 5.10.0.
mroUpgraded from version 1.00 to 1.01. Performance for single inheritance is 40% faster - see "Performance Enhancements" below.
mro is now implemented as an XS extension. The documented interface has not changed. Code relying on the implementation detail that some mro:: methods happened to be available at all times gets to "keep both pieces".
ExtUtils::MakeMakerUpgraded from version 6.42 to 6.55_02.
Note that ExtUtils::MakeMaker::bytes and ExtUtils::MakeMaker::vmsish have been removed from this distribution.
Test::HarnessUpgraded from version 2.64 to 3.17.
Note that one side-effect of the 2.x to 3.x upgrade is that the experimental Test::Harness::Straps module (and its supporting Assert, Iterator, Point and Results modules) have been removed. If you still need this, then they are available in the (unmaintained) Test-Harness-Straps distribution on CPAN.
UNIVERSALUpgraded from version 1.04 to 1.05.
UNIVERSAL->import() is now deprecated.
Now looks in include-fixed too, which is a recent addition to gcc's search path.
No longer incorrectly treats enum values like macros (Daniel Burr).
Now handles C++ style constants (//) properly in enums. (A patch from Rainer Weikusat was used; Daniel Burr also proposed a similar fix).
LVALUE subroutines now work under the debugger.
The debugger now correctly handles proxy constant subroutines, and subroutine stubs.
perlbug now uses %Module::CoreList::bug_tracker to print out upstream bug tracker URLs.
Where the user names a module that their bug report is about, and we know the URL for its upstream bug tracker, provide a message to the user explaining that the core copies the CPAN version directly, and provide the URL for reporting the bug directly to upstream.
Perl 5.11.0 added a new utility perlthanks, which is a variant of perlbug, but for sending non-bug-reports to the authors and maintainers of Perl. Getting nothing but bug reports can become a bit demoralising: we'll see if this changes things.
This contains instructions on how to build perl for the Haiku platform.
This describes the new interface for pluggable Method Resolution Orders.
This document, by Richard Foley, provides an introduction to the use of performance and optimization techniques which can be used with particular reference to perl programs.
This describes how to access the perl source using the git version control system.
The various large Changes* files (which listed every change made to perl over the last 18 years) have been removed, and replaced by a small file, also called Changes, which just explains how that same information may be extracted from the git version control system.
The file Porting/patching.pod has been deleted, as it mainly described interacting with the old Perforce-based repository, which is now obsolete. Information still relevant has been moved to perlrepository.
perlapi, perlintern, perlmodlib and perltoc are now all generated at build time, rather than being shipped as part of the release.
when() treats specially most of the filetest operatorspod/perlthrtut.pod is the same material reworked for ithreads.
With version objects, we need them to use MODULE VERSION syntax. This patch removes the deprecation note.
isa() will often be faster.C3 Method Resolution Order has been optimised - linearisation for classes with single inheritance is 40% faster. Performance for multiple inheritance is unchanged.use locale, the locale-relevant information is now cached on read-only values, such as the list returned by keys %hash. This makes operations such as sort keys %hash in the scope of use locale much faster.DESTROY methods are no longer called.Perl_sv_utf8_upgrade()keys on empty hashThe layout of directories in ext has been revised. Specifically, all extensions are now flat, and at the top level, with / in pathnames replaced by -, so that ext/Data/Dumper/ is now ext/Data-Dumper/, etc. The names of the extensions as specified to Configure, and as reported by %Config::Config under the keys dynamic_ext, known_extensions, nonxs_ext and static_ext have not changed, and still use /. Hence this change will not have any affect once perl is installed. Safe has been split out from being part of Opcode, and mro is now an extension in its own right.
Nearly all dual-life modules have been moved from lib to ext, and will now appear as known nonxs_ext. This will made no difference to the structure of an installed perl, nor will the modules installed differ, unless you run Configure with options to specify an exact list of extensions to build. In this case, you will rapidly become aware that you need to add to your list, because various modules needed to complete the build, such as ExtUtils::ParseXS, have now become extensions, and without them the build will fail well before it attempts to run the regression tests.
If vendorlib and vendorarch are the same, then they are only added to @INC once.
$Config{usedevel} and the C-level PERL_USE_DEVEL are now defined if perl is built with -Dusedevel.
Configure will enable use of -fstack-protector, to provide protection against stack-smashing attacks, if the compiler supports it.
Configure will now determine the correct prototypes for re-entrant functions, and for gconvert, if you are using a C++ compiler rather than a C compiler.
On Unix, if you build from a tree containing a git repository, the configuration process will note the commit hash you have checked out, for display in the output of perl -v and perl -V. Unpushed local commits are automatically added to the list of local patches displayed by perl -V.
As part of the flattening of ext, all extensions on all platforms are built by make_ext.pl. This replaces the Unix-specific ext/util/make_ext, VMS-specific make_ext.com and Win32-specific win32/buildext.pl.
Removed libbsd for AIX 5L and 6.1. Only flock() was used from libbsd.
Removed libgdbm for AIX 5L and 6.1. The libgdbm is delivered as an optional package with the AIX Toolbox. Unfortunately the 64 bit version is broken.
Hints changes mean that AIX 4.2 should work again.
On Cygwin we now strip the last number from the DLL. This has been the behaviour in the cygwin.com build for years. The hints files have been updated.
Support for Apollo DomainOS was removed in Perl 5.11.0
The hints files now identify the correct threading libraries on FreeBSD 7 and later.
We now work around a bizarre preprocessor bug in the Irix 6.5 compiler: cc -E - unfortunately goes into K&R mode, but cc -E file.c doesn't.
Patches from the Haiku maintainers have been merged in. Perl should now build on Haiku.
Support for Tenon Intersystems MachTen Unix layer for MacOS Classic was removed in Perl 5.11.0
Support for Atari MiNT was removed in Perl 5.11.0.
Perl should now build on MirOS BSD.
Hints now supports versions 5.*.
Various changes from Stratus have been merged in.
There is now support for Symbian S60 3.2 SDK and S60 5.0 SDK.
Improved message window handling means that alarm and kill messages will no longer be dropped under race conditions.
Reads from the in-memory temporary files of PerlIO::scalar used to fail if $/ was set to a numeric reference (to indicate record-style reads). This is now fixed.
VMS now supports getgrgid.
Many improvements and cleanups have been made to the VMS file name handling and conversion code.
Enabling the PERL_VMS_POSIX_EXIT logical name now encodes a POSIX exit status in a VMS condition value for better interaction with GNV's bash shell and other utilities that depend on POSIX exit values. See "$?" in perlvms for details.
File::Copy now detects Unix compatibility mode on VMS.
-I on shebang line now adds directories in front of @INC as documented, and as does -I when specified on the command-line.kill is now fatal when called on non-numeric process identifiers. Previously, an 'undef' process identifier would be interpreted as a request to kill process "0", which would terminate the current process group on POSIX systems. Since process identifiers are always integers, killing a non-numeric process is now fatal.@_. The optimisation has been re-instated, and the performance regression fixed.while (1) { map 1, 1 } [RT #53038].m command was broken on modules that defined constants [RT #61222].crypt and string complement could return tainted values for untainted arguments [RT #59998].-i.suffix command-line switch now recreates the file using restricted permissions, before changing its mode to match the original file. This eliminates a potential race condition [RT #60904].$? would not have the top bit set ($? & 128) even if the child core dumped.$^R could incorrectly become undefined [RT #57042].$object->isa('Foo') would report false if the package Foo didn't exist, even if the object's @ISA contained Foo.@ISA, have been found and fixed.$x=\$y; $x |= "foo" [RT #54956]. my $byte = chr(192);
my $utf8 = chr(192); utf8::upgrade($utf8);
$utf8 =~ /$byte|X}/i; # failed in 5.10.0
use utf8 is in effect), double-quoted literal strings could be corrupted where a \xNN, \0NNN or \N{} is followed by a literal character with ordinal value greater than 255 [RT #59908].B::Deparse failed to correctly deparse various constructs: readpipe STRING [RT #62428], CORE::require(STRING) [RT #62488], sub foo(_) [RT #62484].setpgrp with no arguments could corrupt the perl stack.eval is now specifically trappable by Safe and ops. Previously it was erroneously treated like string eval.[~ were sometimes parsed as the smart match operator (~~) [RT #63854].* quantifier in patterns was sometimes treated as {0,32767} [RT #60034, #60464]. For example, this match would fail:
("ab" x 32768) =~ /^(ab)*$/
shmget was limited to a 32 bit segment size on a 64 bit OS [RT #63924].next or last to exit a given block no longer produces a spurious warning like the following:
Exiting given via last at foo.pl line 123
'.\foo' and '..\foo' were treated differently than './foo' and '../foo' by do and require [RT #63492]. *bar=*foo{FORMAT}; # foo format now bad
Can't coerce GLOB to $type.use filetest 'access', -x was using the wrong access mode. This has been fixed [RT #49003].length on a tied scalar that returned a Unicode value would not be correct the first time. This has been fixed.tie inside in array tie could SEGV. This has been fixed. [RT #51636]PerlIOStdio_close() has been identified and fixed. This used to cause various threading issues, including SEGVs.unpack, the use of () groups in scalar context was internally placing a list on the interpreter's stack, which manifested in various ways, including SEGVs. This is now fixed [RT #50256].substr, \&$x, tie $x, $m and chop. These have all been fixed.s///ge has been reverted, as it turned out to be the cause of obscure bugs in seemingly unrelated parts of the interpreter [commit ef0d4e17921ee3de].elsif are now correct... operator now works correctly with ranges whose ends are at or close to the values of the smallest and largest integers.binmode STDIN, ':raw' could lead to segmentation faults on some platforms. This has been fixed [RT #54828].index $str, ... was effectively being executed as index "$str\0", .... This has been fixed [RT #53746].DBI [RT #56908].tr// within a closure could cause a segfault [RT #61520].Perl_sv_chop() or otherwise upgrading an SV could result in an unaligned 64-bit access on the SPARC architecture [RT #60574].inc_version_list would incorrectly list 5.10.* after 5.8.*; this affected the @INC search order [RT #67628].pack "a*", $tainted_value returned a non-tainted value [RT #52552].printf and sprintf could produce the fatal error panic: utf8_mg_pos_cache_update when printing UTF-8 strings [RT #62666].AUTOLOAD method might be missed (method cache issue) [RT #60220,60232].use feature and //ee could cause a memory leak [RT #63110].-C on the shebang (#!) line is once more permitted if it is also specified on the command line. -C on the shebang line used to be a silent no-op if it was not also on the command line, so perl 5.10.0 disallowed it, which broke some scripts. Now perl checks whether it is also on the command line and only dies if it is not [RT #67880].Assertion rx->sublen >= (s - rx->subbeg) + i failed
TMPDIR is now honored when opening an anonymous temporary filepanic: sv_chop %sThis new fatal error occurs when the C routine Perl_sv_chop() was passed a position that is not within the scalar's string buffer. This could be caused by buggy XS code, and at this point recovery is not possible.
Can't locate package %s for the parents of %sThis warning has been removed. In general, it only got produced in conjunction with other warnings, and removing it allowed an ISA lookup optimisation to be added.
v-string in use/require is non-portableThis warning has been removed.
Deep recursion on subroutine "%s"It is now possible to change the depth threshold for this warning from the default of 100, by recompiling the perl binary, setting the C pre-processor macro PERL_SUB_DEPTH_WARN to the desired value.
SVt_RV is gone. RVs are now stored in IVsPerl_vcroak() now accepts a null first argument. In addition, a full audit was made of the "not NULL" compiler annotations, and those for several other internal functions were corrected.dSAVEDERRNO, dSAVE_ERRNO, SAVE_ERRNO, RESTORE_ERRNO have been added to formalise the temporary saving of the errno variable.Perl_sv_insert_flags has been added to augment Perl_sv_insert.Perl_newSV_type(type) has been added, equivalent to Perl_newSV() followed by Perl_sv_upgrade(type).Perl_newSVpvn_flags() has been added, equivalent to Perl_newSVpvn() and then performing the action relevant to the flag.
Two flag bits are currently supported.
SVf_UTF8This will call SvUTF8_on() for you. (Note that this does not convert an sequence of ISO 8859-1 characters to UTF-8). A wrapper, newSVpvn_utf8() is available for this.
SVs_TEMPCall Perl_sv_2mortal() on the new SV.
There is also a wrapper that takes constant strings, newSVpvs_flags().
Perl_croak_xs_usage has been added as a wrapper to Perl_croak.PerlIO_find_layer and PerlIO_list_alloc are now exported.PL_na has been exterminated from the core code, replaced by local STRLEN temporaries, or *_nolen() calls. Either approach is faster than PL_na, which is a pointer deference into the interpreter structure under ithreads, and a global variable otherwise.Perl_mg_free() used to leave freed memory accessible via SvMAGIC() on the scalar. It now updates the linked list to remove each piece of magic as it is freed.PL_reg_curpm is now reference counted. This eliminates a lot of hackish workarounds to cope with it not being reference counted.Perl_mg_magical() would sometimes incorrectly turn on SvRMAGICAL(). This has been fixed.-Dm. The tracing can alternatively output via the PERL_MEM_LOG mechanism, if that was enabled when the perl binary was compiled.-DM to enable it.-DB now dumps subroutine definitions, leaving -Dx for its original purpose of dumping syntax trees.Nullav, Nullcv, Nullhv, Nullop, Nullsv etc have been replaced by NULL in the core code, and non-dual-life modules, as NULL is clearer to those unfamiliar with the core code.MUTABLE_PTR(p) has been added, which on (non-pedantic) gcc will not cast away const, returning a void *. Macros MUTABLE_SV(av), MUTABLE_SV(cv) etc build on this, casting to AV * etc without casting away const. This allows proper compile-time auditing of const correctness in the core, and helped picked up some errors (now fixed).mPUSHs() and mXPUSHs() have been added, for pushing SVs on the stack and mortalizing them.mro_meta has changed slightly. Nothing outside the core should be accessing this directly anyway.Many modules updated from CPAN incorporate new tests.
Several tests that have the potential to hang forever if they fail now incorporate a "watchdog" functionality that will kill them after a timeout, which helps ensure that make test and make test_harness run to completion automatically. (Jerry Hedden).
Some core-specific tests have been added:
Check that the debugger can retain source lines from eval.
Check that bad layers fail.
Check that PerlIO layers are not leaking.
Check that certain special forms of open work.
General PerlIO tests.
Check that there is no unexpected interaction between the internal types PVBM and PVGV.
Check that mro works properly in the presence of aliased packages.
Tests for dbmopen and dbmclose.
Tests for the interaction of index and threads.
Tests for the interaction of esoteric patterns and threads.
Test that qr doesn't leak.
Tests for the interaction of regex recursion and threads.
Tests for the interaction of patterns with embedded qr// and threads.
Tests for Unicode properties in regular expressions.
Tests for the interaction of Unicode properties and threads.
Test the tied methods of Tie::Hash::NamedCapture.
Check that POSIX character classes behave consistently.
Check that exportable re functions in universal.c work.
Check that setpgrp works.
Tests for the interaction of substr and threads.
Check that upgrading and assigning scalars works.
Check that Unicode in the lexer works.
Check that Unicode and tie work.
This is a list of some significant unfixed bugs, which are regressions from either 5.10.0 or 5.8.x.
List::Util::first misbehaves in the presence of a lexical $_ (typically introduced by my $_ or implicitly by given). The variable which gets set for each iteration is the package variable $_, not the lexical $_ [RT #67694].
A similar issue may occur in other modules that provide functions which take a block as their first argument, like
foo { ... $_ ...} list
charnames pragma may generate a run-time error when a regex is interpolated [RT #56444]:
use charnames ':full';
my $r1 = qr/\N{THAI CHARACTER SARA I}/;
"foo" =~ $r1; # okay
"foo" =~ /$r1+/; # runtime error
A workaround is to generate the character outside of the regex:
my $a = "\N{THAI CHARACTER SARA I}";
my $r1 = qr/$a/;
The following items are now deprecated.
Switch is buggy and should be avoided. From perl 5.11.0 onwards, it is intended that any use of the core version of this module will emit a warning, and that the module will eventually be removed from the core (probably in perl 5.14.0). See "Switch statements" in perlsyn for its replacement.Class::ISAPod::PlainerShellCurrently support to install from CPAN without a force is TODO in CPAN and CPANPLUS. This will be addressed before 5.12.0 ships.
suidperl has been removed. It used to provide a mechanism to emulate setuid permission bits on systems that don't support it properly.This uses a new warnings category: "imprecision".
They are now very similar to those produced by Algorithm::C3.
Changes the error message to "Unrecognized character %s; marked by <-- HERE after %s<-- HERE near column %d". This should make it a little simpler to spot and correct the suspicious character.
termcap.pl, tainted.pl, stat.pl, shellwords.pl, pwd.pl, open3.pl, open2.pl, newgetopt.pl, look.pl, find.pl, finddepth.pl, importenv.pl, hostname.pl, getopts.pl, getopt.pl, getcwd.pl, flush.pl, fastcwd.pl, exceptions.pl, ctime.pl, complete.pl, cacheout.pl, bigrat.pl, bigint.pl, bigfloat.pl, assert.pl, abbrev.pl, dotsh.pl, and timelocal.pl are all now deprecated. Using them will incur a warning.
Some of the work in this release was funded by a TPF grant funded by Dijkmat BV, The Netherlands.
Steffen Mueller and David Golden in particular helped getting CPAN modules polished and synchronised with their in-core equivalents.
Craig Berry was tireless in getting maint to run under VMS, no matter how many times we broke it for him.
The other core committers contributed most of the changes, and applied most of the patches sent in by the hundreds of contributors listed in AUTHORS.
Much of the work of categorizing changes in this perldelta file was contributed by the following porters using changelogger.bestpractical.com:
Nicholas Clark, leon, shawn, alexm, rjbs, rafl, Pedro Melo, brunorc, anonymous, ☄, Tom Hukins, anonymous, Jesse, dagolden, Moritz Onken, Mark Fowler, chorny, anonymous, tmtm
Finally, thanks to Larry Wall, without whom none of this would be necessary.
If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page.
If you believe you have an unreported bug, please run the perlbug program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of perl -V, will be sent off to perlbug@perl.org to be analysed by the Perl porting team.
If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN.
The Changes file for an explanation of how to view exhaustive details on what changed.
The INSTALL file for how to build Perl.
The README file for general stuff.
The Artistic and Copying files for copyright information.
