File::RsyBak - Backup files/directories with histories, using rsync
This document describes version 0.22 of File::RsyBak (from Perl distribution File-RsyBak), released on 2014-09-05.
From your Perl program:
use File::RsyBak qw(backup); backup( source => '/path/to/mydata', target => '/backup/mydata', histories => [-7, 4, 3], # 7 days, 4 weeks, 3 months );
Or, just use the provided script from the command-line:
% rsybak --source /path/to/mydata --target /backup/mydata
Example resulting backup (after several runs so that backup history has accumulated):
% ls /path/to/mydata/ myfile anotherfile mydir/ % ls /backup/mydata/ current/ hist.2013-10-31@12:04:17+00/ hist.2013-11-01@12:09:31+00/ hist.2013-11-02@12:09:41+00t/ hist.2013-11-03@12:15:02+00/ hist.2013-11-04@12:13:19+00/ hist.2013-11-05@12:11:31+00/ hist2.2013-10-08@12:07:50+00/ hist2.2013-10-15@12:06:03+00/ hist2.2013-10-21@12:02:42+00/ hist2.2013-10-27@12:06:25+00t/ hist3.2013-06-25@12:15:39+00/ hist3.2013-08-31@12:05:31+00/ hist3.2013-10-02@12:05:57+00/
Each directory under
/backup/mydata is a "snapshot" backup of
% ls /backup/mydata/current/ myfile anotherfile mydir/ % ls /backup/mydata/hist.2013-10-31@12:04:17+00/ myfile anotherfile mydir/ % ls /backup/mydata/hist3.2013-10-02@12:05:57+00/ myfile anotherfile mydir/ someoldfile
This module is basically just a wrapper around rsync to create a filesystem backup system. Some characteristics of this backup system:
For example, you can create 7 level-1 backup histories (equals 7 daily histories if you run backup once daily), 4 level-2 backup histories (equals 4 weekly histories) and 3 level-3 backup histories (roughly equals 3 monthly histories). The number of levels and history per levels are customizable.
They are just verbatim copies (produced by "rsync -a") of source directory. The upside of this is ease of cherry-picking (taking/restoring individual files from backup). The downside is lack of compression and the backup not being a single archive file.
This is because rsync needs two real directory trees when comparing. Perhaps if rsync supports tar virtual filesystem in the future...
This way, we can maintain several backup histories without wasting too much space duplicating data when there are not a lot of differences among them.
Rsync is implemented in C and has been optimized for a long time. rm is also used instead of Perl implementation File::Path::remove_path.
There are ports of rsync and rm on Windows, but this module hasn't been tested on those platforms.
This module uses Log::Any logging framework.
Backup files/directories with histories, using rsync.
backup( source => "/home/steven/mydata", target => "/backup/steven/mydata"); Arguments ('*' denotes required arguments):
Whether to do backup or not.
If backup=1 and rotate=0 then will only create new backup without rotating histories.
Whether to force creation of source directory in target.
If set to 1, then backup(source => '/a', target => '/backup/a') will create another 'a' directory in target, i.e. /backup/a/current/a. Otherwise, contents of a/ will be directly copied under /backup/a/current/.
Will always be set to 1 if source is more than one, but default to 0 if source is a single directory. You can set this to 1 to so that behaviour when there is a single source is the same as behaviour when there are several sources.
Pass extra options to rsync command.
Extra options to pass to rsync command when doing backup. Note that the options will be shell quoted, , so you should pass it unquoted, e.g. ['--exclude', '/Program Files'].
Specifies number of backup histories to keep for level 1, 2, and so on. If number is negative, specifies number of days to keep instead (regardless of number of histories).
Whether to do rotate after backup or not.
If backup=0 and rotate=1 then will only do history rotating.
Director(y|ies) to backup.
Returns an enveloped result (an array).
First element (status) is an integer containing HTTP status code (200 means OK, 4xx caller error, 5xx function error). Second element (msg) is a string containing error message, or 'OK' if status is 200. Third element (result) is optional, the actual result. Fourth element (meta) is called result metadata and is optional, a hash that contains extra information.
First, we lock target directory to prevent other backup process from interfering:
mkdir -p TARGET flock TARGET/.lock
Then we copy source to temporary directory:
rsync SRC TARGET/.tmp
If copy finishes successfully, we rename temporary directory to final directory 'current':
rename TARGET/.tmp TARGET/current touch TARGET/.current.timestamp
If copy fails in the middle, TARGET/.tmp will still be lying around and the next backup run will just continue the rsync process:
rsync SRC TARGET/.tmp
Finally, we remove lock:
First, we lock target directory to prevent other backup process to interfere:
Then we rsync source to target directory (using --link-dest=TARGET/current):
rsync SRC TARGET/.tmp
If rsync finishes successfully, we rename target directories:
rename TARGET/current TARGET/hist.<timestamp> rename TARGET/.tmp TARGET/current touch TARGET/.current.timestamp
If rsync fails in the middle, TARGET/.tmp will be lying around and the next backup run will just continue the rsync process.
Finally, we remove lock:
TARGET/hist.* are level-1 backup histories. Each backup run will produce a new history:
TARGET/hist.<timestamp1> TARGET/hist.<timestamp2> # produced by the next backup TARGET/hist.<timestamp3> # and the next ... TARGET/hist.<timestamp4> # and so on ... TARGET/hist.<timestamp5> ...
You can specify the number of histories (or number of days) to maintain. If the number of histories exceeds the limit, older histories will be deleted, or one will be promoted to the next level, if a higher level is specified.
For example, with histories being set to [7, 4, 3], after TARGET/hist.<timestamp8> is created, TARGET/hist.<timestamp1> will be promoted to level 2:
rename TARGET/hist.<timestamp1> TARGET/hist2.<timestamp1>
TARGET/hist2.* directories are level-2 backup histories. After a while, they will also accumulate:
TARGET/hist2.<timestamp1> TARGET/hist2.<timestamp8> TARGET/hist2.<timestamp15> TARGET/hist2.<timestamp22>
When TARGET/hist2.<timestamp29> arrives, TARGET/hist2.<timestamp1> will be promoted to level 3: TARGET/hist3.<timestamp1>. After a while, level-3 backup histories too will accumulate:
TARGET/hist3.<timestamp1> TARGET/hist3.<timestamp29> TARGET/hist3.<timestamp57>
Finally, TARGET/hist3.<timestamp1> will be deleted after TARGET/hist3.<timestamp85> comes along.
The idea for this module came out in 2006 as part of the Spanel hosting control panel project. We need a daily backup system for shared hosting accounts that supports histories and cherry-picking. Previously we had been using a Python-based script rdiff-backup. It was not very robust, the script chose to exit on many kinds of non-fatal errors instead of ignoring the errors and continuning backup. It was also very slow: on a server with hundreds of accounts with millions of files, backup process often took 12 hours or more. After evaluating several other solutions, we realized that nothing beats the raw performance of rsync. Thus we designed a simple backup system based on it.
First public release of this module is in Feb 2011. I have since used this script in various production servers as well as personal PCs/laptops.
Just use rsync's --exclude et al. Pass them to extra_rsync_opts.
Just follow the general practice. While this is not a place to discuss backups in general, some of the principles are:
Backups are just verbatim copies of files/directories, so just use whatever filesystem tools you like.
From your backup host:
[BAK-HOST]% rsybak --source USER@SRC-HOST:/path --dest /backup/dir
Or alternatively, you can backup on SRC-HOST locally first, then send the resulting backup to BAK-HOST.
* Allow ionice etc instead of just nice -n19
Snapback2, which is a backup system using the same basic principle (rsync snapshots), created in as early as 2004 (or earlier) by Mike Heins. Do check it out. I wish I had found it first before reinventing it in 2006 :-)
Please visit the project's homepage at https://metacpan.org/release/File-RsyBak.
Source repository is at https://github.com/perlancar/perl-File-RsyBak.
Please report any bugs or feature requests on the bugtracker website https://rt.cpan.org/Public/Dist/Display.html?Name=File-RsyBak
When submitting a bug or request, please include a test-file or a patch to an existing test-file that illustrates the bug or desired feature.
This software is copyright (c) 2014 by email@example.com.
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.