Ted Pedersen > Text-SenseClusters-1.03 > INSTALL

Download:
Text-SenseClusters-1.03.tar.gz

Annotate this POD

CPAN RT

Open  0
View/Report Bugs
Source  

NAME ^

INSTALL Installation instructions for SenseClusters

SYNOPSIS ^

If you have su or sudo access, you should be able to install and test the installation of SenseClusters via automatic download from CPAN as follows:

  # install SenseClusters and all dependent CPAN modules
  perl -MCPAN -e 'install Bundle::Text::SenseClusters';

  # install cluto and SVDPACKC (included in SenseClusters)
  cd ~/.cpan/build/Text-SenseClusters-[insert_version]
  cd External
  csh ./install.sh /usr/local/bin
  cd ~

  # run SC test cases (note that location of cpan build 
  # directory might vary on your system. 

  cd ~/.cpan/build/Text-SenseClusters-[insert_version]
  cd Testing
  csh ./ALL-TESTS.sh
  cd ~

This assumes that /usr/local/bin is in your PATH and is your preferred location for user installed executable scripts. If it is not, substitute your preferred directory here.

INSTALLATION OVERVIEW ^

SenseClusters consists of the core SenseClusters programs (primarily .pl programs found in this distribution), Perl modules available from CPAN, and two external programs (SVDPACKC and Cluto). SenseClusters requires Perl 5.6.0 or better.

SVDPACKC is distributed as C source code, and Cluto is distributed in binary form for Linux and Solaris. This dependence on CLUTO limits SenseClusters to running on Linux or Solaris. There is a Windows version of CLUTO available, but we have not tested how well this integrates into SenseClusters.

Please note that SenseClusters uses the csh - this is an artifact of it originally being developed on Solaris/Sun systems (which used csh as a default). Many Linux distributions do not include csh, so you will want to install that if you don't already have it. On Ubuntu and Debian systems, this can be done simply via :

 sudo apt-get install csh

Also note that the default behavior of Ubuntu distributions to use dash as the system shell causes some problems, so you may want to reset this to use bash. See https://wiki.ubuntu.com/DashAsBinSh for more details.

AUTOMATIC INSTALLATION ^

You may be able to download and install the SenseClusters core, dependent CPAN modules, and External programs via a single command using the CPAN module.

If you have sudo or su access, then installation of the CPAN modules and the core SenseClusters programs can be achieved as follows:

  perl -MCPAN -e 'install Bundle::Text::SenseClusters';

This command will install SenseClusters and all dependent CPAN modules. SenseClusters includes a script that will help you install the External code as well. You may be able to install the external programs Cluto and SVDPACKC via the following :

  cd ~/.cpan/build/Text-SenseClusters-[insert_version]
  cd External
  csh ./install.sh INSTALLDIR
  cd ~

If you have sudo or su access, INSTALLDIR should be a directory in your PATH, such as /usr/local/bin. If you do not, you will need to install into a directory you have read and write access to, and then include in your path. If install.sh fails for some reason, you will need to install Cluto and SVDPATH manually, as described below.

At present SenseClusters does not utilize 'make test', so testing must be done via scripts found in the /Testing directory. Please make certain to run these tests after the installation of the External programs, CPAN modules, and SenseClusters core has concluded.

  cd ~/.cpan/build/Text-SenseClusters-[insert_version]
  cd Testing
  csh ./ALL-TESTS.sh
  cd ~

If this automatic install does not work, you can download SenseClusters manually from CPAN http://search.cpan.org/dist/Text-SenseClusters or Sourceforge http://senseclusters.sourceforge.net and install as described in the rest of this document.

SENSECLUSTERS COMPONENTS ^

CPAN Modules

SenseClusters depends on a number of different CPAN modules. These are all included in the Bundle above, and can be installed via the Bundle (recommended) or individually (described below).

EXTERNAL PACKAGES (/External)

The following packages are not written in Perl and are developed outside of the SenseClusters project. SVDPACKC is distributed as C source code, and Cluto is distributed as pre-complied binaries for Linux and Solaris.

Please note that SVDPACK is optional - SenseClusters will run without it (just don't use the --svd option). However, Cluto is mandatory, SenseClusters will not be able to perform clustering without it.

MANUAL INSTALLATION OF CPAN MODULES ^

If the Bundle install does not succeed, you will need to install the following modules manually:

MANUAL INSTALLATION OF EXTERNAL PACKAGES ^

Please note that we provide a modified version of SVDPACK in /External/SVDPACKC that makes all the changes described below. You should be able to compile and install this code via the External/install.sh script. If that fails you can follow the steps described in the install script manually. If for some reason you would prefer to start with a fresh copy of SVDPACKC, you can follow the directions below (which also explain the changes we have made and included in SenseClusters /External/SVDPACKC).

SVDPACKC (Feb 2004 version or better)

SVDPACKC is a C program that performs SVD. It is available for download from http://www.netlib.org/svdpack. SVDPACKC does not have a version number associated with it, but check the files in your download to make sure they are dated from at least Feb 2004. The version we include and modify in /External/SVDPACKC is the Feb 2004 version.

Please note that you should use version 3.2.2, 3.2.3, or 3.3.0 of the gcc compiler. Segmentation faults results if you use version 4 or better. We are currently investigating the use of SVDLIBC as an alternative for our SVD processing.

While installing SVDPACKC, you need to modify the following files (already done in /External) :

   1.   In las2.c, uncomment the following line 

        /*      #define  UNIX_CREAT     */

        if you are running on a Unix or Linux platform.

   2.   In las2.h, modify the default values of constants LMTNW, NMAX and  
        NZMAX to some larger numbers such that -

        NMAX    = Maximum size of the feature space before reduction 
                  (we set this to 30,000)
        NZMAX   = Maximum possible number of Non-zero entries 
                  (we assume our 30,000 x 30,000 matrix is at most 1% dense
                  and hence NZMAX = 30,000 x 30,000 / 100 = 9,000,000)
        LMTNW   = Maximum Work Space Area required 
                = 6*NMAX + 4*NMAX + 1 + NMAX*NMAX
                  (we set LMTNW = 900300001 for a 
                  1% dense 30,000 x 30,000 matrix)

   3.   Modify the file makefile so that ANSI C is used. 

        CC = gcc -ansi

        [Please use gcc version 3.2.2, 3.2.3, or 3.3.0 when compiling SVDPACKC.
        gcc versions 4.0.0 and above appear to result in segmentation faults.] 

   4.   Run 'make las2' after the above modifications are done in las2.h,
        las2.c, and makefile.

Testing SVDPACKC

The following steps will will help you check that SVDPACKC is installed correctly.

 # unzip the sample belladit.gz data file that comes with SVDPACKC
 gunzip belladit.gz

 # copy this as the input matrix to SVDPACKC
 cp belladit matrix

 # run las2 to test if everything is ok
 las2

 # this will not produce any output to STDOUT, but it should create 2  
 # output files - lav2 (binary) and lao2 (text)

CLUTO (version 2.1.1 or better)

The script External/install.sh will attempt to retrieve and install Cluto automatically. If that fails, you can follow the steps outline in the install script, or the instructions below.

SenseClusters uses CLUTO to support extensive clustering options, analysis and visualization. CLUTO is freely available from http://www-users.cs.umn.edu/~karypis/cluto/

If you run on both Linux and Solaris platforms, you will need to set your path slightly differently each time to allow SenseClusters to run. The following code in your .cshrc file will take care of this.

 set OSNAME=`uname -s`

 if ($OSNAME == "SunOS") then
        set path = (PATH_2_CLUTO/Sun $path)
 else if ($OSNAME == "Linux") then
        set path = (PATH_2_CLUTO/Linux $path)
 else echo "lost"
 endif

where, PATH_2_CLUTO is a complete path to the directory where CLUTO is downloaded and unpacked. If you only run on Solaris or Linux, then of course you can just set the path with the appropriate statement from above.

GCLUTO [optional]

Users interested in graphical visualization of clusters are encouraged to try GCLUTO which is also freely down-loadable from http://www-users.cs.umn.edu/~karypis/cluto/gcluto/index.html

To use GCLUTO, you will require the libglut.so.3 library installed on your system. These can be downloaded from - http://at.rpmfind.net/opsys/linux/RPM/libglut.so.3.html

CORE SENSECLUSTERS INSTALLATION ^

Note that SenseClusters can be installed via the Bundle command described in the SYNOPSIS. If for some reason that fails, you can proceed as follows:

To install the core of SenseClusters, if you have su or sudo access (root user), then you can install via :

perl -MCPAN -e 'install Text::SenseClusters';

Or you can install manually as follows:

    perl Makefile.PL
    make
    make install 
    cd Testing
    csh ./testall.sh
    cd ..

Note that the testall.sh scripts will not be run via automatic installation. If you do not install manually, you should go back and run the test scripts just to verify that everything is working as expected.

The exact location where SenseClusters will be installed depends on your system configuration. A message will be printed out after 'make install' telling you exactly where it was installed.

Local Installation of Core SenseClusters programs

If you are not able to log in as su or sudo (to be the root user), then you may need to install SenseClusters in a local directory that you own and have permissions to read and write into. You can proceed as above, except that you will need to provide PREFIX and LIB options for your Makefile.PL command, as in:

perl Makefile.PL PREFIX = /YOUR/DIR LIB=/YOUR/DIR/lib

This will set up a Makefile that will install the core SenseClusters programs (*.pl) into /YOUR/DIR/bin/. You will need to set your path to specifically include this directory.

The Sensecluster.pm module will be installed into /YOUR/DIR/lib. You will need to set your PERL5LIB environment variable to have this directory included in your @INC array (which defines the directories that Perl searches for modules).

You man pages will be installed in directories like /YOUR/DIR/share/man/ (Linux) or /YOUR/DIR/man/ (Solaris). You will need to set your MANPATH to include these.

Note that the exact locations will be shown after executing 'make install' command. Please double check the recommended settings for PATH and MANPATH there as those will be tailored to your system.

C SHELL (csh) SETUP ^

If you install without root or superuser access, you will need to set the paths of the dependent packages mentioned previously. The following is an example of how you might set your paths before using SenseClusters if you are using the C shell (csh). If you use another shell then you will need to modify this accordingly.

This assumes that Perl and PDL have been installed by your system administrator and you do not need to set paths to find them. In general we would recommend that Perl and PDL be installed with root access as it's more simple that way.

Assume that all of the external C packages (SVDPACKC, Cluto) have been installed in directories beneath /space/kulka020 (our home directory for this example). It also assumes that all of the CPAN modules have been installed in /space/kulka020/MyPerlLib. In other words, it is assumed that all CPAN modules were installed via the following command:

perl Makefile.PL PREFIX=/space/kulka020/Text-SenseClusters-1.00 LIB=/space/kulka020/MyPerlLib

 #######################################################################
 #    insert the following into ~/.cshrc and modify HOMEDIR and LIBHOME
 #######################################################################
 
 # local directory where we are installing everything
 
 setenv HOMEDIR /space/kulka020
 
 # library name extension used by Perl on our system

 setenv LIBDIR /space/kulka020/MyPerlLib
 
 # UMD developed code, we need to set their /bin directories in the PATH
 
 setenv SENSECLUSTERS $HOMEDIR/Text-SenseClusters-1.00
 setenv NSP $HOMEDIR/Text-NSP-1.09

 # externally developed C code, directories contain executable code so must 
 # be included in PATH
 
 setenv SVDPACK $HOMEDIR/SVDPACKC
 setenv CLUTO $HOMEDIR/cluto-2.1.1
 
 # pick the right version of Cluto (Solaris or Linux)
 
 set OSNAME=`uname -s`
 
 if ($OSNAME == "SunOS") then
        setenv MYCLUTO $CLUTO/Sun
 else if ($OSNAME == "Linux") then
        setenv MYCLUTO $CLUTO/Linux
 else echo "lost"
 endif
 
 # set the path that Perl searches for CPAN modules
 
 setenv PERL5LIB $LIBDIR

 # set the path that is searched for executables
 
 set AKPATH = ($SVDPACK $NSP/bin $MYCLUTO $SENSECLUSTERS/bin .)
 
 set path = ($AKPATH $path)

INSTALLING SenseClusters' Web-interface: ^

If you would like to setup the SenseClusters' web-interface locally please refer to README.Web.pod for installation instructions.

SEE ALSO ^

The SenseClusters web page provides links to downloads, the web interface, documentation, and CVS directories:

 L<http://senseclusters.sourceforge.net>

We have three mailing lists available for SenseClusters:

AUTHORS ^

 Ted Pedersen, University of Minnesota, Duluth
 tpederse at d.umn.edu

 Anagha Kulkarni, Carnegie Mellon University

 Amruta Purandare, University of Pittsburgh

This document last modified by : $Id: INSTALL.pod,v 1.16 2013/06/27 14:34:06 tpederse Exp $

COPYRIGHT ^

Copyright (c) 2004-2008, Ted Pedersen

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.

Note: a copy of the GNU Free Documentation License is available on the web at http://www.gnu.org/copyleft/fdl.html and is included in this distribution as FDL.txt.

syntax highlighting: